Related
I have a Blaze on T-mobile's value plan with 2gb data. I am currently running stock 2.3.6 gingerbread and have an icon blinking that there is an OTA update to ICS waiting for me to install. I've postponed that for the moment until I find the answer to my tethering question.
I would rarely use it, but on trips I would like to be able to use my blaze as a hotspot for a tablet/laptop. Im a noob, and afraid to go down the rooting path. With staying stock 2.3.6, would I be able to just use the built in hotspot app to give access to a tablet/laptop? If not, would foxfi or another program work?
Also, if I were to go ahead and install the ICS update would that affect things? If I can use the built in hotspot app or foxfi only in 2.3.6 and ICS update would not allow these options then I'd prefer to stay where I am on 2.3.6. If I need to stay on gingerbread, how can I get this annoying icon telling me to update to go away?
Thanks so much for your help guys
i recently went ics with the over the air update and i was able to get my wifi tethering working with the built in hotspot w/o rooting. i still rooted in the end though.
ics has the ability to disable apps, so you can disable WifiProvision.apk (i stopped getting t-mobile messages related to hotspot)
i'm not sure if it matters, but i also use the app Widgetsoid. It feels like many apps in one. I use the widget to enable my wifi (which is wifi hotspot)
chandrew said:
i recently went ics with the over the air update and i was able to get my wifi tethering working with the built in hotspot w/o rooting. i still rooted in the end though.
ics has the ability to disable apps, so you can disable WifiProvision.apk (i stopped getting t-mobile messages related to hotspot)
i'm not sure if it matters, but i also use the app Widgetsoid. It feels like many apps in one. I use the widget to enable my wifi (which is wifi hotspot)
Click to expand...
Click to collapse
I havent upgraded yet, but I have a question about disabling things. I have a galaxy tab 2 with 4.04 ics and I wanted to turn off the software update feature to remain on that version in case a JB update came out. I could not figure out how to disable the app, so I wondered about how to disable things in general. What are the steps?
To disable apps on ICS: Settings > Applications > All > [Select app / .apk]. Then you just hit disable, or uninstall to uninstall updates, then the disable button appears.
This would be howto disable OTA: http://forum.xda-developers.com/showthread.php?t=1856632
I would still recommend going to the latest update on stock. I think it's better and generally is able to support everything in the previous.
Hey guys i was wondering if someone could help me for getting a rom that works right outta the box with global mode. I tried liquid smooth and Slim Beans, but i cant switch to GSM mode or Add apn's...i am using Synergy right now, but i dont even get a whole day on one charge.. so i was wondering if anyone know of any Rom that can automatically find the APN, or at least we can add them. and also allows to use GSM Mode
Thanks
I am in cairo egypt right now. When I got here I was running pacman rom. I did not get a signal. I was able to eventually get a signal by going into the phone hidden menu thru the app pimp my rom (same menu the app phone info used to go to) and switch my radio to gsm auto (prl). But this seemed a little spotty at times. While here I wanted to try MOAR rom, which is touchwiz based. I figured if I cannot activate that I can just restore my nandroid backup in twrp and be fine. However after installing MOAR and waiting about 90 seconds, my Verizon S3 activated fine. So in my recent experience I guess the easiest wayI can say to get Global mode working is any rom based off stock, or stock rom itself.
Edit - Forgot to mention that I did not change the sim card and I am connected to Vodafone. However this means any calls texts or data I use while here incur very expensive charges with verizon, so I am using wifi and my Google voice number with talkatone to not have to worry about this.
Sent from my SCH-I535
sfetaz said:
I am in cairo egypt right now. When I got here I was running pacman rom. I did not get a signal. I was able to eventually get a signal by going into the phone hidden menu thru the app pimp my rom (same menu the app phone info used to go to) and switch my radio to gsm auto (prl). But this seemed a little spotty at times. While here I wanted to try MOAR rom, which is touchwiz based. I figured if I cannot activate that I can just restore my nandroid backup in twrp and be fine. However after installing MOAR and waiting about 90 seconds, my Verizon S3 activated fine. So in my recent experience I guess the easiest wayI can say to get Global mode working is any rom based off stock, or stock rom itself.
Edit - Forgot to mention that I did not change the sim card and I am connected to Vodafone. However this means any calls texts or data I use while here incur very expensive charges with verizon, so I am using wifi and my Google voice number with talkatone to not have to worry about this.
Sent from my SCH-I535
Click to expand...
Click to collapse
Awesome, will Give Moar a try. Did you install APN manager pro btw or did it let you add an APN.?
Thanks for the answer btw
djteotancolis said:
Awesome, will Give Moar a try. Did you install APN manager pro btw or did it let you add an APN.?
Thanks for the answer btw
Click to expand...
Click to collapse
I did not use any apn software to get it to work on either rom. Also I do not believe it needs to be MOAR rom, any touchwiz based verizon rom should work, including synergy, beans or cleanrom. With the 4.1 jellybean update for verizon S3 i think the global mode was added by default, as it is a choice under settings->wireless and networks-> more settings, mobile networks, network mode
Hey guys,
I'm trying to get my n5 to tether and it just gives me an error as soon as I start the WiFi hotspot (stock). Any idea what could be causing this or now I could fix it?
Using 4.4.2, by the way...
Sent from my Nexus 5 using Tapatalk
Good to see you over here. Are you rooted yet? Cuz i think Sprint is blocking tethering unless you pay for it
sent from my HAMMERHEAD neXus
phishfi said:
Hey guys,
I'm trying to get my n5 to tether and it just gives me an error as soon as I start the WiFi hotspot (stock). Any idea what could be causing this or now I could fix it?
Using 4.4.2, by the way...
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Silly question, but if you're not rooted are you paying for the hotspot ability from Sprint?
Their really cracking down
sent from my HAMMERHEAD neXus
My tethering works although I had to hack it
Sent from my Nexus 5 using xda app-developers app
toreyjh said:
Silly question, but if you're not rooted are you paying for the hotspot ability from Sprint?
Click to expand...
Click to collapse
I am rooted, so if there's some trick to try please do share. I believe I'm paying for the hotspot feature, although going through the change plan process doesn't seem to show that option anywhere (I just tried to find it to see whether or not it was already enabled but I can't find it anywhere on the Sprint site...).
Sent from my Nexus 5 using Tapatalk
phishfi said:
I am rooted, so if there's some trick to try please do share. I believe I'm paying for the hotspot feature, although going through the change plan process doesn't seem to show that option anywhere (I just tried to find it to see whether or not it was already enabled but I can't find it anywhere on the Sprint site...).
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I had tethering working on Sprint via this mod:
add a new entry to the "global" table called "tether_dun_required" with a value of 0 in the /data/data/com.android.providers.settings/databases/settings.db file.
Just updated to 4.4.2; re-rooted (via WugFresh toolkit) tried tethering and its not working anymore. Not sure if its related to the 4.4.2 or not.
Anyone have a fix?
phishfi said:
Hey guys,
I'm trying to get my n5 to tether and it just gives me an error as soon as I start the WiFi hotspot (stock). Any idea what could be causing this or now I could fix it?
Using 4.4.2, by the way...
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
ralphkaz said:
I had tethering working on Sprint via this mod:
add a new entry to the "global" table called "tether_dun_required" with a value of 0 in the /data/data/com.android.providers.settings/databases/settings.db file.
Just updated to 4.4.2; re-rooted (via WugFresh toolkit) tried tethering and its not working anymore. Not sure if its related to the 4.4.2 or not.
Anyone have a fix?
Click to expand...
Click to collapse
Had a similar situation. See my post here. Maybe it will help.
AGiLiT said:
Had a similar situation. See my post here. Maybe it will help.
Click to expand...
Click to collapse
Thanks, appreciate the help. My issue is different however - the phone seems to start the tethering and I can connect to it through my tablet - but no data seems to flow... can't even run a speedtest on the tablet or load any webpage...
On the T-Mo side, I was afraid that we would lose the tethering with the latest 4.2.2 OTA - and initially, it looked that way. Speedtest would work on download side but "communications issues" on the upload side & unable to finish and show results .... Arrrrrgghhhh.
With two Nexus 5 on hand, it was easy to compare pre- and post- edits, hotspot & speed data, etc. along with comparing the entries in the above mentioned settings.db fields. First, save a coopy of the *.db just in case it is needed - then, added the tether_dun_required and value to 0 as a new entry/line, saved & exit. Reboot device for good measures, and sure enough, it connected by got re-directed to T-Mo's home page ... APN was set to IPv6
Change it to IPv4 and exit, restarted WiFi hotspot and it is good - fast speed and websites loading quickly, etc.
This may, or may not, help out those on Sprint's network - but, worth looking into ...
Letitride said:
Change it to IPv4 and exit, restarted WiFi hotspot and it is good - fast speed and websites loading quickly, etc.
This may, or may not, help out those on Sprint's network - but, worth looking into ...
Click to expand...
Click to collapse
While on Sprint I don't see a way to even get into the IPv4 vs. 6 settings - no APN settings available in the mobile network settings menu...
ralphkaz said:
While on Sprint I don't see a way to even get into the IPv4 vs. 6 settings - no APN settings available in the mobile network settings menu...
Click to expand...
Click to collapse
Use PDA-Net and Foxfi to tether to your computer or sprint.
Letitride said:
On the T-Mo side, I was afraid that we would lose the tethering with the latest 4.2.2 OTA - and initially, it looked that way. Speedtest would work on download side but "communications issues" on the upload side & unable to finish and show results .... Arrrrrgghhhh.
With two Nexus 5 on hand, it was easy to compare pre- and post- edits, hotspot & speed data, etc. along with comparing the entries in the above mentioned settings.db fields. First, save a coopy of the *.db just in case it is needed - then, added the tether_dun_required and value to 0 as a new entry/line, saved & exit. Reboot device for good measures, and sure enough, it connected by got re-directed to T-Mo's home page ... APN was set to IPv6
Change it to IPv4 and exit, restarted WiFi hotspot and it is good - fast speed and websites loading quickly, etc.
This may, or may not, help out those on Sprint's network - but, worth looking into ...
Click to expand...
Click to collapse
Thanks. The APN settings options are not there on a Sprint phone; drove me crazy trying to duplicate the the posts of the T-Mobile trailblazers until I saw a screenshot and figured that out. :laugh:
adio01 said:
Use PDA-Net and Foxfi to tether to your computer or sprint.
Click to expand...
Click to collapse
yep, i'm aware of those but would prefer to use the built in android tethering. anyone else able to get hotspot working on Sprint on 4.4.2 ?
ralphkaz said:
yep, i'm aware of those but would prefer to use the built in android tethering. anyone else able to get hotspot working on Sprint on 4.4.2 ?
Click to expand...
Click to collapse
Yes; see my post here .
4.4.2 here, Sprint tethering still works for me after update.... Just tested it
Stock rooted, no custom ROM, no custom kernel just plain old stock with root and the settings.db edit
orthonovum said:
4.4.2 here, Sprint tethering still works for me after update.... Just tested it
Stock rooted, no custom ROM, no custom kernel just plain old stock with root and the settings.db edit
Click to expand...
Click to collapse
Hmm, wonder what happened with my config then. I'm in the same boat - stock rooted only. maybe i will try removing the new line in settings.db are re-adding... Right now I can launch hotspot and connect to it from tablet/laptop but no data flows thru the pipe....
I lost my tether after the 4.4.2 update as well. I have a Sprint Nexus 5. My laptop and tablet were able to connect to the hotspot, but no data was coming across.
I looked at the settings.db file and could still see the "tether_dun_required" entry was definitely there. So I decided to replace the settings.db file with a copy I had from before the 4.4.2 update. Rebooted the phone, and magically, tether started working again.
I was curious though to see if I put the post-4.4.2 update settings.db file back, then would I lose my tether? So, once again, I replaced the settings.db file with the post-4.4.2 version, rebooted the phone, and magically, tether still was working! WTF!
The only thing interesting that I noticed during all of this is that every time I replaced the settings.db file on the phone, the corresponding settings.db-journal file would disappear. I don't know much about SQLite, but I wonder if the journal file had some transaction state with the "tether_dun_required" hack removed or not committed.
Anyway, hope this helps.
KitKat Sucks. My battery life is just magically drained all day. And the updates killed my texts.
REGARDLESS OF THIS - I AM OFFERING $25 PER ROM FOR ANYONE THAT SENDS ME STABLE CM JELLY BEAN ROMS FOR THE MOTOROLA PHOTON Q, I AM MOSTLY LOOKING AT PEOPLE LIKE KABALDAN, AAAAARGH, ETC WHO MIGHT HAVE THEM STASHED AWAY ON A HARD DRIVE SOMEWHERE.
IF YOU CANNOT REACH ME HERE THEN PLEASE SEND A PRIVATE MESSAGE OR EMAIL ME AT [email protected] OR [email protected]. YOU CAN ALSO TEXT ME AT 432-212-9654
You may want to remove your email addresses and phone number from this post.
I'll see what I can dig up I spose. Either way, check your wakelocks.
Edit - I found a really old build of an unofficial cm10.1...xt897c. From April 29 2013. Not sure you want it, I'm not really sure what it is. I'll keep poking to see if I can find something official...
Edit 2 - cm11 is kitkat, just FYI
Edit 3 - checked my roomie's phone (he uses the Q now) and I only seem to have a couple of sideload's which I doubt are what you want... and a TWRP backup of stock jb.
I doubt you'll want this upload I have of some random 10.1, I seriously doubt it's "stable" by any stretch of the word. cm11 runs fairly well IMHO, but you seem to be completely against it... maybe someone else will have and old zip of cm kicking around.
Edit 4 - found some gold for you. Will be better I'm sure than the random build I have on my dropbox. No need to donate me any money, I'm just trying to help.
http://download.cyanogenmod.org/?device=xt897c
I guess that either an app causes wakelocks or the media scanner is going crazy (that's why I use XPosed + a module to modify its behavour).
For the latter it should be enough to remove all kind of media from the phone and the sdcard. After done that, insert the sdcard to the PQ.
The media scanner will be running in the background. If you want to reboot, do it before or right after you insert the sdcard. While the media scanner is running you should not reboot (just let it alone for a few hours).
I'm not quiet sure but if I remember correct, the media scanner starts a full scan after the sdcard has been inserted. It possible that it does the same after a reboot...
PS: Don't forget that any kind of repeated crashes or app-misfunctions cause a log entry. This can let to a wakelock like behavour.
To avoid this, don't use badly programmed apps.
I wanted to like KitKat. I feel that I have given it plenty of opportunity. But I dont even use my phone for an hour or two and then i have like 1/4 - 1/3 battery gone. And I'm buying brand new sealed MPQs from ebay so its not a battery wear issue.
There were some CM JB roms where the battery wouldnt move all day if you didnt touch the phone. 5 hours later, 99%. Never happens anymore.
I just feel like the JB roms were optimized for the phone and KK roms are an afterthought with no active development. When my texting was killed in an update, that was the last straw.
I love this phone cuz its the last great slider. I REFUSE TO ASSIMILATE. I also use the phone for actual work almost constantly. Emails, spreadsheets, forms, etc. I demand a keyboard for this work. It is definitely worth $25 to me to have a stable rom for the future of this phone. If the market doesnt provide a new slider phone I can still see myself with this phone in 5 years. So I am really trying to prepare for the future with nailing down some good stable roms for this phone that I can stick with for longevity.
I will try the rom(s) in your last link and if it pans out I'll send you some beer money. Thank you very much for taking the time to respond and dig around your files.
I know what you mean. I used to rock cm10.2 on my PQ and the battery would last like forever. I'm talking about 3-4 days with 6-7 hours of screen time. If I didn't touch the phone much it would last a week.
Sooner or later I updated to kitkat and at some point lost the backup. I wasn't satisfied with kitkats battery life so I tried to get back. But even after flashing some of the recent cm10.2 roms of that time my battery life would never get as good as the particular version I had.
Sent from my XT897 with Tapatalk 4
Kabaldan or skrillex or someone had their own build concurrent with the official builds and i think his had some good tweaks, that is the hardest one to find.
arrrghhh said:
Edit 4 - found some gold for you. Will be better I'm sure than the random build I have on my dropbox. No need to donate me any money, I'm just trying to help.
http://download.cyanogenmod.org/?device=xt897c
Click to expand...
Click to collapse
I downloaded CM 10.1.3 stable and I have no mobile data. I went with a CM11 nightly from the same list and still had no mobile data.
I believe its because I switched to ting, these builds default to an old sprint LTE or something. In any event, the phone status says "Mobile Network State 'Disconnected'" in both apps.
I am thinking about restoring my stock ting image and then flashing over it without wiping the data to see if this resolves the issue. If not, what was that secret code to get into the radio menu to activate/deactivate different radios and bands and stuff?
matt2k12 said:
I downloaded CM 10.1.3 stable and I have no mobile data. I went with a CM11 nightly from the same list and still had no mobile data.
I believe its because I switched to ting, these builds default to an old sprint LTE or something. In any event, the phone status says "Mobile Network State 'Disconnected'" in both apps.
I am thinking about restoring my stock ting image and then flashing over it without wiping the data to see if this resolves the issue. If not, what was that secret code to get into the radio menu to activate/deactivate different radios and bands and stuff?
Click to expand...
Click to collapse
My roomie is on Ting, and I just flashed the latest CM11 snapshot and mobile data hooked up no problem IIRC... I can doublecheck his exact settings tonight.
Did you check the APN settings? Did you check which network 'mode' is chosen?
CM 10.2 2013 Feb 5 nightly boot looped on the dirty flash.... grrrr...... knew this wasnt going to be easy.
matt2k12 said:
CM 10.2 2013 Feb 5 nightly boot looped on the dirty flash.... grrrr...... knew this wasnt going to be easy.
Click to expand...
Click to collapse
You can't dirty flash between ROM's... At least it's highly advised against.
arrrghhh said:
My roomie is on Ting, and I just flashed the latest CM11 snapshot and mobile data hooked up no problem IIRC... I can doublecheck his exact settings tonight.
Did you check the APN settings? Did you check which network 'mode' is chosen?
Click to expand...
Click to collapse
How do I check the APN settings?
OK I changed network mode to CDMA + LTE/EVDO and I at least have 3g for now. It may even be 4g masquerading as 3g, I remember there was an icon glitch....
But how do I get to APN settings and the secret code for the programming menu? Or is that functionality gone in CM?
matt2k12 said:
How do I check the APN settings?
OK I changed network mode to CDMA + LTE/EVDO and I at least have 3g for now. It may even be 4g masquerading as 3g, I remember there was an icon glitch....
But how do I get to APN settings and the secret code for the programming menu? Or is that functionality gone in CM?
Click to expand...
Click to collapse
UPDATE - As I pushed reply I glanced at my phone and the 4g icon is now present. Yay!
Will post updates as I test out the app
EDIT - spoke a little too soon - 4g timed out, sent and received a little data, but still not functional.
The PRL is the same on my stock ting which is updated and has 4g and full service, and on these other builds (54022)
What is not the same is my "mobile network type". On CM it just says "LTE" but on stock Ting it says "LTE:13" and again, "network state = disconnected"
Ok, here is a rundown of my current situation -
In an effort to verify that mobile data is working on any of my CM roms I went with the latest CM 11 nightly for jbbl.
I have no data in the latest CM11 nightly, and I also have no text messaging (send button greyed out / disabled), which is the reason I decided to start this adventure for old roms in the first place, when my texting went out on the 1/3/2015 nightly.
I need to figure out how to get to that hidden radio menu and see if that can help me, if anyone has the dialer code to get to that menu on CM it would be greatly appreciated. But it might not even be accessible on CM.
The only thing I can think of now is flashing the stock FZX and starting over..... not very excite.
matt2k12 said:
Ok, here is a rundown of my current situation -
In an effort to verify that mobile data is working on any of my CM roms I went with the latest CM 11 nightly for jbbl.
I have no data in the latest CM11 nightly, and I also have no text messaging (send button greyed out / disabled), which is the reason I decided to start this adventure for old roms in the first place, when my texting went out on the 1/3/2015 nightly.
I need to figure out how to get to that hidden radio menu and see if that can help me, if anyone has the dialer code to get to that menu on CM it would be greatly appreciated. But it might not even be accessible on CM.
The only thing I can think of now is flashing the stock FZX and starting over..... not very excite.
Click to expand...
Click to collapse
Most of the dialer codes won't work in CM. You need to sort out any programming in stock, then move to CM.
If your data worked on stock before moving to CM, then there's something awry with your CM configuration I suppose.
From your last post, data works just not LTE? What APN is configured? PRL is a preferred roaming list, shouldn't have anything to do with regular service. Only applies when you are roaming.....
arrrghhh said:
Most of the dialer codes won't work in CM. You need to sort out any programming in stock, then move to CM.
If your data worked on stock before moving to CM, then there's something awry with your CM configuration I suppose.
From your last post, data works just not LTE? What APN is configured? PRL is a preferred roaming list, shouldn't have anything to do with regular service. Only applies when you are roaming.....
Click to expand...
Click to collapse
I dont know how to get to APN settings on the different builds. Only one of them actually had "Access Point Names" in the mobile networks menu. If you can tell me how, I can get you this information.
On CM10.1.3 "Stable" from your link I get a 3G icon and mobile data (not sure if 4g, probably not) Mobile Network Type states - CDMA / EvDo rev A:6
(I seem to remember browser crashing, which it is, and Chrome becoming my internet app, with this build)
On CM 10.2 20131205 I get no data service, no data icon, and mobile network type is "LTE" and state is "disconnected".
On the latest CM11 nightly I am on "Mobile Network Type - LTE" "Mobile Network State - Disconnected" obviously no data
I do have phone service on all the builds. But no 4g and spotty 3g only on CM10.1.3 stable
I noticed when the latest nightly booted up that I had debugging mode already activated. IS there any chance that I had debugging mode activated during one of my flashes and that is the root of all my problems with this?
matt2k12 said:
I dont know how to get to APN settings on the different builds. Only one of them actually had "Access Point Names" in the mobile networks menu. If you can tell me how, I can get you this information.
Click to expand...
Click to collapse
Access Point Name == APN, should be in the mobile networks menu like you stated. Maybe since you're on old CDMA builds it's not available, try on CM11.
matt2k12 said:
On CM10.1.3 "Stable" from your link I get a 3G icon and mobile data (not sure if 4g, probably not) Mobile Network Type states - CDMA / EvDo rev A:6
(I seem to remember browser crashing, which it is, and Chrome becoming my internet app, with this build)
On CM 10.2 20131205 I get no data service, no data icon, and mobile network type is "LTE" and state is "disconnected".
On the latest CM11 nightly I am on "Mobile Network Type - LTE" "Mobile Network State - Disconnected" obviously no data
I do have phone service on all the builds. But no 4g and spotty 3g only on CM10.1.3 stable
Click to expand...
Click to collapse
Again, if LTE works fine on stock then you probably just have some bad settings on CM...
matt2k12 said:
I noticed when the latest nightly booted up that I had debugging mode already activated. IS there any chance that I had debugging mode activated during one of my flashes and that is the root of all my problems with this?
Click to expand...
Click to collapse
Are you clean flashing every time you jump around? Each time you are basically jumping to a completely different version of CM, so make sure you are completely clean flashing (IE wipe all of the partitions (except external SD) including system and internal SD before trying another CM.
arrrghhh said:
Access Point Name == APN, should be in the mobile networks menu like you stated. Maybe since you're on old CDMA builds it's not available, try on CM11.
Again, if LTE works fine on stock then you probably just have some bad settings on CM...
Are you clean flashing every time you jump around? Each time you are basically jumping to a completely different version of CM, so make sure you are completely clean flashing (IE wipe all of the partitions (except external SD) including system and internal SD before trying another CM.
Click to expand...
Click to collapse
I'm using open recovery and wiping data/factory reset, davlik, and cache every time
Hey Scott, you mind giving one of those old builds a whirl for me? Just for science's sake.
Update - I wiped the whole phone with RSD lite - same issues................................. jumped straight into the latest nightly - no data, AND no text messaging - mobile network state = disconnected
I have 2 MPQs, one on stock rom and one I am trying to get on CM - the one on stock rom always says Mobile Network Type = LTE:13. That is from Ting. The Mobile Network Type once I flash CM always just says "LTE" - obviously not the same. Does it matter that my base rom is 4.1.2?
Final Update - I downloaded the CM10.2 snapshot from the link you downloaded. At first I had no data. Then I switched to EVDO only and I had 3g. Then I went to the tile menu and I added LTE to the tile menu. LTE was off by default on the tile menu. I re-enabled LTE and then went to mobile networks and switched to CDMA +LTE/EVDO and miraculously, 4g appeared! I followed these steps on previous builds but it never did anything for me. So I dont know if it was the snapshot version or just messing with the settings over and over but I wish I had that 12 hours of my life back.
Its working now and I am going to let everyone know how it does. I appreciate your help as always Scott!
If you didnt remember, now you do.... I am THE KING of wasting forum space.
Video instructions are linked below.**
Hey, everyone! I just wanted to share something that I figured out when I was trying to enable my WiFi hotspot on my S8. First of all, I have an AT&T Galaxy S8 (G950U) with Unlimited Data, and my hotspot doesn't typically work at all. When I try to enable it normally, it has to "verify," then it tells me I need to subscribe. However, while playing around with Package Disabler Pro and the hotspot, I figured out how to get the hotspot turned on (running off of unlimited data) without root or any sort of complex workaround. The only things you'll need are a $2 app, ANY WiFi source (even locked), and a supported carrier on your S8 (AT&T, Verizon, and others). Here the steps to get it up and running:
1) Download Package Disabler Pro (by policedeveloper), get it up and running, and search for "tether" in the seach box
2) Three options should pop up ("TetheringProvision", "TetheringAutomation", and "com.qualcomm.qti.tetherservice"). Disable all three packages.
3) Go to your Mobile Hotspot settings and make sure WiFi Sharing is turned ON. Very important.
4) Go to your WiFi Settings and connect to any WiFi network near you, but PURPOSELY put in the wrong WiFi password. It will try to connect for a short time, so you need to be quick on the next step.
5) Quickly enable your mobile hotspot while the phone is still trying to connect to the network with the wrong password. After the hotspot turns on, quickly turn off your WiFi. The hotspot will stay on and continue to run off of your unlimited data!
I actually tested this last year on the Galaxy S7 edge on AT&T, so it works on there as well! I've uploaded the following videos to YouTube as well for the S7 and S8 respectively, so if this helped you, be sure to go click on some ads on my YouTube videos! It helps me out lol.
**S7 edge video: https://youtu.be/w3usivgCFSc
**S8 video: https://youtu.be/f8n6-ZrdIQg
It's worth noting that I'm actually not sure how many carriers this works on. I know it doesn't work on Sprint, but lately it actually started working on Verizon too. I've had some people tell me that it works on other smaller carriers as well, but if it works for you in a different carrier leave a comment below so I can see how many it works on please!
Not seemingly working for sprint. No matter how fast I swap to disable the wifi, if the wifi is disconnected, hotspot it turned off.
druep said:
Not seemingly working for sprint. No matter how fast I swap to disable the wifi, if the wifi is disconnected, hotspot it turned off.
Click to expand...
Click to collapse
Yeah, unfortunately it won't work on Sprint. Turns out they have a different way of checking to see if you're subscribed to tethering. I did find this thread several months ago dealing with getting the hotspot turned on with Sprint though. Check it out and let me know if it still works if you don't mind:
https://forum.xda-developers.com/sprint-galaxy-s6-edge/general/unlimited-hotspot-root-t3249042
ldog3211 said:
Yeah, unfortunately it won't work on Sprint. Turns out they have a different way of checking to see if you're subscribed to tethering. I did find this thread several months ago dealing with getting the hotspot turned on with Sprint though. Check it out and let me know if it still works if you don't mind:
https://forum.xda-developers.com/sprint-galaxy-s6-edge/general/unlimited-hotspot-root-t3249042
Click to expand...
Click to collapse
Actually, you could also try downloading the Galaxy Tools app, check "enable hotspot", and then reboot your phone. Basically works the same way I think but it's automatic:
https://www.dropbox.com/s/afvzbs5w752yp4p/GTv3.1.5.apk?dl=0
ldog3211 said:
Yeah, unfortunately it won't work on Sprint. Turns out they have a different way of checking to see if you're subscribed to tethering. I did find this thread several months ago dealing with getting the hotspot turned on with Sprint though. Check it out and let me know if it still works if you don't mind:
https://forum.xda-developers.com/sprint-galaxy-s6-edge/general/unlimited-hotspot-root-t3249042
Click to expand...
Click to collapse
In an OTA update last Friday, Sprint locked down the ##DATA# method and settings are now grayed out for me. The previous Shortcut method I'd used to edit APN settings wasn't working either. I did come a different Shortcut Master search string which allowed me to get in and edit the APN, however. I don't know why from one view it works, but from the other it did not. If memory serves it was looking for LTEfunctionality.
These carriers need a swift kick in the ass for disabling features on these phones.
druep said:
In an OTA update last Friday, Sprint locked down the ##DATA# method and settings are now grayed out for me. The previous Shortcut method I'd used to edit APN settings wasn't working either. I did come a different Shortcut Master search string which allowed me to get in and edit the APN, however. I don't know why from one view it works, but from the other it did not. If memory serves it was looking for LTEfunctionality.
Click to expand...
Click to collapse
Oh, I see. That sucks! I don't have a Sprint Galaxy phone, so I can't test anything out, but I wonder if it's still possible through that different search string. I don't really know how any of that works though. What I really wish would happen is for Samsung to actually stand up to these carriers and not keep taking their BS. However, even Apple, as great as they are at this, blocks the hotspot on certain iPhones depending on the carrier and plan...
peachpuff said:
These carriers need a swift kick in the ass for disabling features on these phones.
Click to expand...
Click to collapse
Yes tf they do. Samsung needs to learn from Apple and stop taking the carriers' BS. That right there would solve a problem a lot of people have with Samsung, but of course they're not going to stop.
druep said:
In an OTA update last Friday, Sprint locked down the ##DATA# method and settings are now grayed out for me. The previous Shortcut method I'd used to edit APN settings wasn't working either. I did come a different Shortcut Master search string which allowed me to get in and edit the APN, however. I don't know why from one view it works, but from the other it did not. If memory serves it was looking for LTEfunctionality.
Click to expand...
Click to collapse
U r correct, the ltefunctionality is the place for editing the apns. Search the sprint thread as this method has been posted several times using quickshortcut maker app and searching test to find the directory. Click try then look for lteapn settings and add dun to the default,mms. It should look like the following.... deault,mms,dun
Any prl or profile updates along with android os updates will undo this. So each time any of those update redo the above steps. I'm on 10gb hotspot and have used it for 3 weeks last month with Bill showing no hotspot data used. I'm on sprint
You should've bought an unlocked S8. I have unlimited data on AT&T with an unlocked S8 and the hotspot works just fine.
peachpuff said:
These carriers need a swift kick in the ass for disabling features on these phones.
Click to expand...
Click to collapse
I never run out of reasons to ensure any phone I buy has root.
Does this method show as you using hot spot and they charge you for using it? I have the unlimited data plan but I am not paying the extra for the hotspot feature because I think it is dumb and should be free anyways as a feature of the phone so I refuse to pay for that service. I have ATT.
chase10784 said:
Does this method show as you using hot spot and they charge you for using it? I have the unlimited data plan but I am not paying the extra for the hotspot feature because I think it is dumb and should be free anyways as a feature of the phone so I refuse to pay for that service. I have ATT.
Click to expand...
Click to collapse
Nope! I've been doing this for over a year now, and I've never gotten any notice, warning, or anything from AT&T. I use AT LEAST 100GB of data every month, and several months I've used over 200GB. They haven't charged me a dime even though I'm not supposed to have the hotspot with my unlimited data plan! And I don't use a VPN or anything...
ldog3211 said:
Nope! I've been doing this for over a year now, and I've never gotten any notice, warning, or anything from AT&T. I use AT LEAST 100GB of data every month, and several months I've used over 200GB. They haven't charged me a dime even though I'm not supposed to have the hotspot with my unlimited data plan! And I don't use a VPN or anything...
Click to expand...
Click to collapse
Well cool. I got it to work. I haven't had much time to test it but it seems great.
On Verizon s8 anyone figure out how to get this working. Can't find app "TetheringProvision" or anything similar to disable on my VZ s8 phone.
I found "TetheringAutomation", and "com.qualcomm.qti.tetherservice" and disabled. It still checks subscription and fails.
Thanks!
Solution: Switch to Tmobile
Yianaki said:
On Verizon s8 anyone figure out how to get this working. Can't find app "TetheringProvision" or anything similar to disable on my VZ s8 phone.
I found "TetheringAutomation", and "com.qualcomm.qti.tetherservice" and disabled. It still checks subscription and fails.
Thanks!
Click to expand...
Click to collapse
You can get your hotspot working by popping sim tray, unlock phone, open up stopwatch, insert sim tray and start stopwatch at the same time, when the stopwatch hits 8 seconds turn on hotspot from the pull down menu.
I know it takes some work but works every time for me. I will try to post a video for anyone who wants. Working on my verizon s8+. Thanks!
jtracker said:
You can get your hotspot working by popping sim tray, unlock phone, open up stopwatch, insert sim tray and start stopwatch at the same time, when the stopwatch hits 8 seconds turn on hotspot from the pull down menu.
I know it takes some work but works every time for me. I will try to post a video for anyone who wants. Working on my verizon s8+. Thanks!
Click to expand...
Click to collapse
I thought for sure that this was going to be a joke to see how long I would sit there popping my sim and launching apps and such, but WOW.
It actually worked on my third attempt ( VZ S8+)
Thanks again for posting this!:good:
Too easy I just went to Settings > Apps clicked the
overflow menu to show system apps and forced stop tetheringprovision and tetheringautomation. I also disabled tethering provision's access to change system settings.
My hotspot worked right away I'm on ATT UDP
has this stopped working after the lastest ATT update