Yesterday, tried to upgrade from original 4.12 to CM10.2, then found the camera did not work , so flashed back to original 4.12 , and tried Twrp Chinese version ( the screen is weird , like the menu is on the right side, but the touch screen actually works on the left a little bit), too hard to use , have to come back to CWM 6.0.3.2, and tried to upgrade to 4.42, while pressing the power and volume down buttons, the screen just showed :" sdcard mode , .......about another 3 rows, slowly blinking, then nothing on the screen. It was ttl dead since yesterday. Anyone who can help on this , do I need to jtag the emmc ? but the problem is ,among N8000,8010,8013,8020 models , which one can be used for I925u? Anyone who has the spec for I925u emmc ?
Thanks a lot!
Related
hi got my galaxy s5 model SM-900F from overseas it was a open phone and i rooted it. After a week it just shutdown and when i start it up it display all grey on the screen. It wont let you see the SAMSUNG logo with the powered by ANDROID screen. But i tried to push the volume key down it let me pass that all grey screen and lead me to the home screen but then after a few minutes it would freeze and become unresponsive. Tried to wipe/factory reset it on the recovery mode still same, also tried to flash the original firmware of the phone that i downloaded on sammobile website still have same issue. the all out grey screen when you turn it on the 1st time. Can someone help pls as i get frustrated on this. btw im in nz and the firmware my phone used was on the hk.. thanks appreciate ur reply..
I have the Galaxy Fame DUOS GT-S6812B variant, I installed the Unofficial CM11 from this forum (http://forum.xda-developers.com/galaxy-fame/orig-development/rom-cyanogenmod11-t2897673), and suddenly touch screen and capacitive buttons weren't working. I tried to install back the official stock rom with Odin and I had the same problem (which I didn't have before installing the CM11) after this I tried to install the stock rom with Kies and same thing. Phone loads the OS and shows the "select language" menu but screen is unresponsive and "menu" and "back" buttons don't work at all, not even light up. Only power button, "volume buttons" and "home" work. I'm getting kind of desperate, a relative gave me the phone so I could make it faster and smoother and instead I've broken it. Please, some help would be highly appreciated. I think the problem might be that installing the CM11 messed up with the Drivers and flashing back the stock couldn't fix that. Is there any way to revert the process and get the drivers back?
Thank you all in advance.
I've got an answer in another forum saying it could be the kernel, but, wouldn't the stock ROM had solved that? in case it wouldn't how can I install the original kernel and thus fix this issue?.
ringox said:
I have the Galaxy Fame DUOS GT-S6812B variant, I installed the Unofficial CM11 from this forum (http://forum.xda-developers.com/galaxy-fame/orig-development/rom-cyanogenmod11-t2897673), and suddenly touch screen and capacitive buttons weren't working. I tried to install back the official stock rom with Odin and I had the same problem (which I didn't have before installing the CM11) after this I tried to install the stock rom with Kies and same thing. Phone loads the OS and shows the "select language" menu but screen is unresponsive and "menu" and "back" buttons don't work at all, not even light up. Only power button, "volume buttons" and "home" work. I'm getting kind of desperate, a relative gave me the phone so I could make it faster and smoother and instead I've broken it. Please, some help would be highly appreciated. I think the problem might be that installing the CM11 messed up with the Drivers and flashing back the stock couldn't fix that. Is there any way to revert the process and get the drivers back?
Thank you all in advance.
I've got an answer in another forum saying it could be the kernel, but, wouldn't the stock ROM had solved that? in case it wouldn't how can I install the original kernel and thus fix this issue?.
Click to expand...
Click to collapse
i m facing the same problem!!!!!
don't know how to solve this....
@ringox....Was your problem solved? please help me because i am having the same problem...my gt 6812 stucks on select language as touch is not working...
Nothings gonna work...trust me i have tried everything...your touchscreen got fried up. The only thing you can do is get it to a nearby samsung store or any nearby mobile repairing store to get a brand new touchscreen. I recommend you to not go to samsung store as it would cost you almost rs.2500 whereas if you go to any other repairing store you can get it fixed in less than rs.1000.
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help?
The experts there may be able to help.
dark112 said:
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Click to expand...
Click to collapse
So, if anyone get blank screen, but not completly as mine, you can solve it like this. I noticed that a black contrast gets a little brighter sometimes. So, I entered recovery (using power + volume down) mode and noticed there is first brighter than darker blank, so i figured out that I entered recovery mode. Previously I plugged in phone in laptop and then deleted all my files on phone and sd card and only copy original rom that I have found on official SIngapore Phicomm page. Then I turned phone, entered recovery mode, then on blind, went on any kind of update (cause usually update is 2. and 3. option, internal and external, 1. is reboot now).
So I pressed down to pick that update (i guessed) and power and repeat it 2 more times and all I could see is blank. After some time, I saw a phicomm logo.. And reminder ** don't use any Phicomm update found on any internet page cause it's all wrong**
Later I have red that it have installed wrong kernel. I hope it will be at any help!
Hey everyone, read this whole story of my note edge and then help me out with suggestions:
- 4 months ago i dropped it, it got a small straight line crack from left to right with no harm done with the touch, i used it everyday with no probs at all.
- Then 2 weeks ago, i flashed the XTREME MUSIC MOD BY ANDROIDEXPERT LIKE 2 TIMES, WHICH NEEDED A DALVIK WIPE, the apps optimization really took long which i think could be the reason for all this mess. I locked the screen, then i went on to unlock it, it never turned the screen on, it has since gone TOTAL BLACK OUT.
- Capacitive button lights and LED light is working, screen is also responding but i just can't see anything.
- i also did a soft reset ( That by removing battery and holding the power button for a minute or so), i turned the phone on but no luck.
====> HERE'S THE TWIST NOW, after 2 weeks of giving up, i tried again, i plugged the charger in and hurrey!, the screen turned on to show the charging animation, BUT, it went on to the boot screen when it shows samsung logo and AGAIN, it went total blackout.
what could be wrong?
no help?
ishaqtkr said:
no help?
Click to expand...
Click to collapse
Flash a stock rom. If youre on 5.0 find a 5.0 stock or if youre on 5.1 do a 5.1
If this does not solve your problem, i would suggest flashing stock rom with pit file (and selecting repartition option in odin)
zeeshanonlyme said:
Flash a stock rom. If youre on 5.0 find a 5.0 stock or if youre on 5.1 do a 5.1
If this does not solve your problem, i would suggest flashing stock rom with pit file (and selecting repartition option in odin)
Click to expand...
Click to collapse
What's a pit file and where can i get it please?
OK I, http://www.tsar3000.com/Joomla/inde...roid-mobile-phones&catid=55:samsung&Itemid=82
I got one from that site for N915F, flashed it with odin but still screen isn't showing anything
Hello every body, hope u're all good
I have a strange problem with my S Duos, and I hope I find a solution from you
So, my phone won't accept any ROM even his stock ROM (jb4.2.2), while it accepts just a version of cm I downloaded the last year, it's (cm-12.1-20151025-UNOFFICIAL-kyleprods.zip ), so, all roms I've tried was being successfully installed with cwm, but when I reboot the phone, it just shows the Samsung logo, and after a while it turns to blank (the screen is just lighting when I press home or power button).
I notice, that i've replaced the phone's screen. And the previous screen was accepting all Roms
Hope I find a solution