Database Info

Some help for making the droid work

I have a POLA100 with windows mobile 6.1 (anime rom 2.0 french) and android installed on ext2 partitions on my SD card.
I'm having heavy troubles making all the thing work.
When I install with polymod rom (2.1g) almost everything is working (exept camera for example) event wifi, but I can't install apps with the market because of "not enough space" ... wait a second, each ext2 partition is 1GB ...
When I install with an other rom, I can't have wifi (I don't use any data connection), so it isn't really usefull ...
And I don't want to remove windows mobile, cause windows allows me to use all of the capabilities of the phone (camera ...)
Is there any way to get my android market to work properly ?

ReMix3D said:
I have a POLA100 with windows mobile 6.1 (anime rom 2.0 french) and android installed on ext2 partitions on my SD card.
I'm having heavy troubles making all the thing work.
When I install with polymod rom (2.1g) almost everything is working (exept camera for example) event wifi, but I can't install apps with the market because of "not enough space" ... wait a second, each ext2 partition is 1GB ...
When I install with an other rom, I can't have wifi (I don't use any data connection), so it isn't really usefull ...
And I don't want to remove windows mobile, cause windows allows me to use all of the capabilities of the phone (camera ...)
Is there any way to get my android market to work properly ?
Click to expand...
Click to collapse
Look here...post 175...this work
http://forum.xda-developers.com/showthread.php?t=651856&page=18
thanks to SuperJMN

Thanks
In fact yes, that works I just tried it yepee
But, so the the eclair builds are not working on a pola100 ?

So, no eclair build on pola100 ?
And for the warm donut, it looks like the camera definition is lower then on WinMo, i.e : with the barcode scanner, it's all blury and the phone can't scan a 2D barcode.
Normal ?

New day, new problems.
I don't know why, but since yesteray I have heavy battery bugs.
I.E : the battery is going down very quick within android (50% in 2h) with almost nothing activated (no wifi/BT, no gps, no data connection, no sync and apps killed with task killer), and when I plug a usb cable, it doesn't charge.
Can somebody please help me ?

ReMix3D said:
New day, new problems.
I don't know why, but since yesteray I have heavy battery bugs.
I.E : the battery is going down very quick within android (50% in 2h) with almost nothing activated (no wifi/BT, no gps, no data connection, no sync and apps killed with task killer), and when I plug a usb cable, it doesn't charge.
Can somebody please help me ?
Click to expand...
Click to collapse
don´t know why...but if i activate wifi...and deactivacte....i can charge

ReMix3D said:
So, no eclair build on pola100 ?
And for the warm donut, it looks like the camera definition is lower then on WinMo, i.e : with the barcode scanner, it's all blury and the phone can't scan a 2D barcode.
Normal ?
Click to expand...
Click to collapse
if you are in the barcode scanner...please rotate the middle wheel for make it sharper...

Thanks Alexander for the camera fix
For the battery, I haven't tried your method, but I note it in my mind. I restarded on WinMo, where the wifi was activated, I de-activated it and run haret to reboot on android. Now the battery is charging.
I'll check if it drops down quick again.
I'm looking at the battery info, the average temperature of my battery is 35°C, normal ?

Well, I think I found the problem : I often run TaskKiller to reduce the charge on the processor, but it kills the battery update service, I just had to except it, now I know when it is charging.
But anyway, it android seems to use more battery then WinMo, normal ?

Hello, me again ! ^^
I was searching on my phone an option to enable auto-completion when writing.
Well, it works, but only for English ... and I'm French.
It seams that I don't have the French dictionary (not bundled in warm donut ?)
Is there a way to installer the French word dictionary on the phone, or must I absolutely use one of the non-free keyboard available on the android market ?
I've also seen that the HTC-IME keyboard looks pretty cool, but there is no version available for our phone, is there ?
[EDIT] I just tried AnySoftKeyboard, with includes a French dictionary, nice ! But for the HTC-IME ?

Htc ime...go with every language but it´s a long way....
Start....:
Installation Instructions
1. Install both HTC_IME.apk and Clicker.apk.
2. Rename/remove the file /system/lib/libt9.so (I suggest renaming to libt9bk.so). You need root permissions to do this (the program Root Explorer works great.)
3. Menu -> Settings -> Locale & text. Enable 'Touch Input'.
4. Go to a text field and long-hold until a menu pops up.
5. Select 'Input Method' and then 'Touch Input'
1.1 Download the latest htc ime from here
http://forum.xda-developers.com/showthread.php?t=567294
or here:
http://forum.xda-developers.com/showthread.php?t=661525
2.1 make the system root/write access to change the name of libt9
- open terminal
- type "su"
- type "mount -o remount,rw /system"
... and then I could rename the file w/ Root Explorer (must be root explorer..i think)
3.1 change the language: look here:
http://ostebaronen.dk/changing-htc_ime-language-to-danish/
a bit easier: change to htc ime...go to sms and long press on the input text...now a menu come and you can change....
go in a explorer to: data/data/com.htc.android.htcime/shared_prefs/com.htc.android.htcime_preferences.xml (now visible)--and copy it to sd card...
open the xml and change the language code (like in the link)....copy it over the old one....
please do not change the lang setting in text input settings...(you don´t see a lang in this box now)
i think it was all
edit: for the correct view: change to 120 dpi....and take my corrected dialer:
http://forum.xda-developers.com/showthread.php?t=676102
Now it´s all...i hope

Grah, I killed android.
I wanted to change the dpi to 120 with rogue tools, but It did something wrong and the density got to 160...
I searched on the forum and found a androidupdate for 120 with working wifi, set it and ... no more android boot ... Oo
Since then I tester many android update for 110 or 120 dpi with or without wifi, and I never rebooted...
I guess I'll have to install android again.
For further crashes like this, is there a way to create a backup of the system ? .... hum since I'm on a ext2 partition on the sd card, maybe just copy the file to my pc ?
[EDIT] Since I'm going to reinstall the whole thing, I saw that on Myn's Warm Donut main page there is a 480*320 version downloadable, but it can't work on our phone, can it ?

Sorry Alexander, i'm here again.
1st, I could not use the HTC IME cause I can't do this :
2. Rename/remove the file /system/lib/libt9.so (I suggest renaming to libt9bk.so). You need root permissions to do this (the program Root Explorer works great.)
Click to expand...
Click to collapse
I cant set the folder /system/lib to read/write with Root Explorer, so can't delete the file ... And can't test the keyboard.
2nd, I used this TOPIC to boost the sensitivity of the screen on WinMo and it gets realy more reactive, is there a similar fix on Android ?

You need to use a terminal ie better terminal to make the filesysytem read/write
su "make's you super user"
mount -o remount,rw /system "makes filesystem read write"
you can use Root Explorer to rename now "the safe way" or
rm /system/lib/libt9.so "removes file"

thanks, it's working now !

Sorry, here I am again.
Recently I lost the data connection on my phone, no more internet with edge (or 3g, is there a way to active/see what type of connection is used ?).
I tried rebooting the phone many time, activating and de-activating wifi, bluetooth, airplane mode, nothing.
I saw a "modem" application, where it seems I can disconnect and re-connect the data connection, I says "data already turned on" but there is nothing to do ...
Any idea (again) ?

Can somebody help me ? I tried by changing the connection configuration in wimno before launching harret, activating auto 3G, enabling or disabling the data connection, but nothing work, android doesn't connect anymore on data. The modem application says that data is turned on but i have no IP.
Please help.

ReMix3D said:
Sorry, here I am again.
Recently I lost the data connection on my phone, no more internet with edge (or 3g, is there a way to active/see what type of connection is used ?).
I tried rebooting the phone many time, activating and de-activating wifi, bluetooth, airplane mode, nothing.
I saw a "modem" application, where it seems I can disconnect and re-connect the data connection, I says "data already turned on" but there is nothing to do ...
Any idea (again) ?
Click to expand...
Click to collapse
Have you tried APNDroid...? with this you can set data connecion on off...

just tried apndroid, with the widget on "On", mms "On", notifications "On", de-activate all apn "off", it doesn't change anything.
I tried to de-activate and re-activate the data with apndroid, but nothing.
Will I have to again re-install Android ?

Wow, I got it to work again, I had to re-create an apn with the correct configuration to make it work.
But anyway, thanks for all
[EDIT]Ow no, just one thing, I have the data icon with a "E", it means that i'm connected with EDGE (2G), no ? Is it possible to activate 3G ?
An other question, totally apart, is there a plan to port android 2.2 to polaris. Cause it seams that it is much faster than all other versions.

[Q] can't turn off edge/2G/3G

can't turn off edge/2G/3G
i have an acer liquid e, and when i set mobile networing off , the E of edge networking still stands in the status bar.
help me please

Plenty of apps restart your mobile data connection by themselves. For example, Lookout switches your data on when you start your phone, which allows blocked apps to bypass DroidWall when you reboot.
The only sure way to switch your data off is by renaming your access points with apps like ApnDroid, Quick Settings or Widgetsoid.

Good reply, rogier!
You can also try to reboot your acer, and see if it was a minor bug! Sometimes, its as easy as that

i have ZD-box and the internet useage meter alway's say's 0 mb used.
am i safe now?
i rebooted plenty of times, i was starting to think that this means that there is Edge/2G/3G connection avaible.

[APP][BETA][ROOT][4+] Wifi Codes - Change Country Codes -Enable Wireless Channels

Wifi Codes for Android 4+
What I'm Doin?
This application allows you to change your phone's wifi country code ( which is set by your simcard ), to be able to see wifi networks on all channels. This application also helps people who can't see any wireless networks while the simcard is in their phone ( like me ) which is again caused by the bad country code.
What I Need?
1.You have to be rooted.
2.Anything else?
Ok cool, How To Get?
You can get the application .apk from here : http://d-h.st/bi2
I will be uploading the application on the market by the time the beta period is over and I'm sure that it works fine on every phone.
Ok gotcha, How To Use?
1. First make sure that wifi is on. ( will be fixed in next releases )
2. Open the application, and put in your desired country code to fly to!
3. You can see 2 main country codes which are already there for you, feel free to use them if they meet your needs!
4. Click `Change It`.
5. Now if it's the first time you are running this application, you will be asked for root permissions. Grant Please!
6. Now If everything goes well you will see a message which says that the country code is changed.
7. Go on and turn off your wifi and turn it back on.
8. You will see all the networks showing up.
Note:You don't have to do this every time the phone boots up... This only needs to be done once. Unless you factory reset your phone.
I can't see any wireless networks
It is caused by new android 4 roms arriving to the devices ( mainly htc phones ) which use some carrier and country specific files to set Wifi Regulatory Domain options ( which was present in wifi settings until android 2.3, but been removed from android 4 and later roms ). If your country code seems unknown to android system, then it fails to set right options and it fails to intiate wireless scan.
To solve this all you need to do is to change your country code manually to a known one, so that android system can determine what channels it should scan for networks.
Change Log
09 Nov. 2012 - V1 - Initial Release
Click to expand...
Click to collapse
Known Bugs
1. If you run the application when the wifi is off, then you will face issues and you will need to restart your phone. ( I'm trying to solve this, but I believe it's nothing with my application, it's an android bug )
2. You Say!
About Beta
This application is still in beta section, and won't get to final releases without the help of you guys.. Feel free to post here if you faced any issues while working with the application.

fail on android 4.4.2
the process fail with android 4.4.2 and a cuban simcard

Easy Guide to save battery on EVERY Android Device with ANY ROM

Guide for AOSP / CM / AOKP / Original TW-based Roms, every Stock-ROM with root, nearly every Custom Rom ​
Works on:
Samsung Galaxy S4
Samsung Galaxy S3
Samsung Galaxy S2
Samsung Galaxy Note
LG 2
Sony Xperia
HTC One
nearly every other Android based Device incl Tablet`s with Android Jelly-Bean or KitKat
One of the most annoying things is the battery consumption of our devices.There are so many Apps in Play Store but most of them are " a Fairy tale"..
There are different ways to save battery. you could under volt your cpu, disable mobile date.. disable synch ect pp...Since 2010 i play around with different Android devices and here is an easy way to save battery. My way will automatic change to the best settings WITHOUT any undervolting, CPU-Tweaks and you will always be able to send and receive data.. I tried different setups, while normal use.
My definition of normal use:
Samsung Galaxy S4
30h of Power ( Mahdi 01/11 KitKat Rom ART active, KT-Kernel without any tweak)
GPS-Navigation with Google Maps for 42Min
Calls about 58:35 Min
Whatsapp online (all the time)
FB Messanger Push on
FB
Kaiten Mail push active (wrote some Mails)
13 SMS sent
Audiobook via PowerAmp 120 min
Screen on for 5h
Location-Sevice and Data always on
76h of Power ( Mahdi 01/06 KitKat Rom ART active, KT-Kernel without any tweak)
nearly the same use
with "automatic Airplane-Mode from 22:30h - 9h
If you follow the steps your phone will:
Switch GPS on if you need it and turn it off
turns HSDPA+ / LTE on when you are not connected to an WIFI-Network and you turn the screen on
Switch HSDPA+ / LTE to 2G when your Screen is off
turn the screen off when you are not looking at the screen
turn the Screen off when you close the S-Cover ( Samsung Galaxy S4 on EVERY ROM)
turn WIFI on if you nearby a known WLAN-Station and off when you are leaving the location ( no matter how many "known" networks with automatic localization " Cell")
switch to 2G and turn of mobile Date if you connected to any WLAN
close apps when screen turns off ( FB or any other app.. its up to you)
before we start you need:
Jelly-Bean 4+ or KitKat ROM 4.4+
Samsung Galaxy S4 ( don't matter wich version) or any other Android Device
root ( custom rom is not nessesery but will make some things easier, i prefer Mahdi with KT-Kernel)
Tasker ( Play Store " 2,99$ ")
Lux ( Play Store " 3,80$" )
Hold Screen on ( Play Store )
Greenify root
Securesettings ( Play Store " free" )
F-Droid ( alternativ store "free") DOWNLOAD LINK
Hal Monitor ( F-Droid Store "free" )
Wifi-Matic ( F-Droid Store "free" )
Automatic 2G Toggle for non CM /AOSP/.. ROM ( e.g. Touchwiz, Xperia, Google,...) LINK XDA
Guide for CM / AOSP ROM
lets start with the easy things:
1. install F-Droid
2. search Hal Monitor in F-Droid and install it. It will bring back the S-View Feature and helps saving power ( only Samsung Galaxy S4 )
3. search Wifi-Matic in F-Droid store an install it. It will recordnice when you enter or leave locations with known WLAN stations, and enable/disable WLAN ( works great)
4. search Secure Settings in Play Store an install. When you are on KitKat-Rom use " Helper Alternative ( 4.1+)" otherwise " Secure Settings Helper"
5. search Tasker in Play Store and install
6. search Lux Auto Brightness in Play Store and install
7. search Hold Screen on in Play Store and install ( if u want the "smart-stay-Feature" screen turning of when you don't look at your display)​
Setup Tasker (easy way)
1. copy the attached file to the backup directory of tasker ( unzipped!!!) and restore you will get the following profiles / actions
a) Wifi connected will toggle Mobile data " off" and switch HSDPA to 2G
b) GPS will turn on if you start Maps, Sygic, Copilot, Camera, ect.. ( please chose your apps in the profile-section)
c) GPS will turn off after 5 Min if you close the under "b" selected apps
d) if the Screen turns off, Airplane-Mode is NOT ENABLED and you are NOT in a call,.. HSDPA will switch to 2G ( mobile data stays on fore mails, whatsapp, fb ect...)
e) if you turn the Screen on, HSDPA will switch to on
e) automatic Airplane-Mode between a specified time e.g. form 3 to 9
f) all needed Tasks ( HSDPA on/ off, GPS on/off, Wifi on/ off,...)​
Setup Wifi-Matic
1. connect to your WLAN
2. open the app and mark " automatic "​
Setup Greenify
1. Select the following apps.. Facebook, Tapatu, Myboard, ect... almost every App that produces Wake-Locks​
Setup Lux brightness control
Follow the Assistant​
Guide for Stock-Rom / Google-Rom / TW-Based / Custom Rom
lets start with the easy things:
1. install F-Droid
2. search Hal Monitor in F-Droid and install it. It will bring back the S-View Feature and helps saving power ( only Samsung Galaxy S4 )
3. search Wifi-Matic in F-Droid store an install it. It will recordnice when you enter or leave locations with known WLAN stations, and enable/disable WLAN ( works great)
4. search Secure Settings in Play Store an install. When you are on KitKat-Rom use " Helper Alternative ( 4.1+)" otherwise " Secure Settings Helper"
5. search Tasker in Play Store and install
6. search Lux Auto Brightness in Play Store and install
7. search Hold Screen on in Play Store and install ( if u want "smart-stay" screen turning of when you don't look at your display)
8. install automatic 2G / 3G toggle​
Setup Tasker
1. copy the attached file to the backup directory of tasker ( unzipped!!!) and restore you will get the following profiles / actions
a) Wifi connected will toggle Mobile data " off" and switch HSDPA to 2G
b) GPS will turn on if you start Maps, Sygic, Copilot, Camera, ect.. ( please chose your apps in the profile-section)
c) GPS will turn off after 5 Min if you close the under "b" selected apps
d) if the Screen turns off, Airplane-Mode is NOT ENABLED and you are NOT in a call,.. HSDPA will switch to 2G ( mobile data stays on fore mails, whatsapp, fb ect...)
e) automatic Airplane-Mode between a specified time e.g. form 3 to 9
f) all needed Tasks ( HSDPA on/ off, GPS on/off, Wifi on/ off,...)
IMPORTEND: You must edit the HSDPA-Task DELETE the first entry " Switch" to 2G nothing more!​
Setup 2G/3G Toggle
1. open the app and activate it
2. tick the Checkbox " trun 3G off when Data is disabled and turn 2G on"
3. Don`t mark " 2G when Screen is off" it collides with Tasker!!
3. Configure it like you want to BUT DON`T FORGET TO REBOOT after changing some options​
Setup Wifi-Matic
1. connect to your WLAN
2. open the app and mark " automatic "​
Setup Greenify
1. Select the following apps.. Facebook, Tapatu, Myboard, ect... almost every App that produces Wake-Locks​
Setup Lux brightness control
Follow the Assistant​
Reboot!!!!!!
Don`t forget to push the Thank You Button if it was useful for u!!!
Cheers Zara
Video ( Youtube )
how to handle Tasker... and an alternative method on Tw-Custom Rom`s to toggle 2G / 3G by using Security Settings second half of the Video shows how to create a task / profile for cm / aosp rom`s to toggle 2G/3G while WIFI is connected...
LINK: http://www.youtube.com/watch?v=QTNjWlXd_XM
credits to:
TheMasterBaron:
for the great 2G toggle
Mahdi786:
for the best 4.4.2 KitKat release to play around so far
Chaos ^_:
for the great dual boot TW-based 4.4.2 KitKat
Tylog:
for SlimKat (hope the RC will come soon)
Phil3759:
for your fantastic Recovery

Great guide.. Thanks
Sent from my GT-I9505G using Tapatalk

Nice but im using a tw based rom and it cant switch between 2g and 3g :s
Enviado desde mi GT-I9505 mediante Tapatalk

thanks for sharing mate! :good:

nice bro. can i share this guide in my local s4 forum??
i will name the source, obviously
Enviado desde mi GT-I9500 mediante Tapatalk

Darius254 said:
Nice but im using a tw based rom and it cant switch between 2g and 3g :s
Enviado desde mi GT-I9505 mediante Tapatalk
Click to expand...
Click to collapse
If you root your S4 and install Security Settings and install the "Helper" you will be able to switch between 3g/ 2g.. via Tasker...If you want i will make a little guide with screenshoots..
cheers

elcolo_ said:
nice bro. can i share this guide in my local s4 forum??
i will name the source, obviously
Enviado desde mi GT-I9500 mediante Tapatalk
Click to expand...
Click to collapse
sure... no problem!
cheers

So is there any solution for Rooted Stock Firmware?

Yes it is! Later today i post a solution
Sent from my GT-I9505 using XDA Premium 4 mobile app

Please the guide
Sent from my GT-I9500 using Tapatalk

neunzehn77 said:
If you root your S4 and install Security Settings and install the "Helper" you will be able to switch between 3g/ 2g.. via Tasker...If you want i will make a little guide with screenshoots..
cheers
Click to expand...
Click to collapse
Please make the guide

neunzehn77 said:
If you root your S4 and install Security Settings and install the "Helper" you will be able to switch between 3g/ 2g.. via Tasker...If you want i will make a little guide with screenshoots..
cheers
Click to expand...
Click to collapse
that would be nice mate! would really appreciate it if u give the guide
thank you

Guide for TW-based Custom-Roms ( Echo-Rom,...)​
First of all is: You need a custom rom TW-based e.g. Echo, Omega, ( be sure to use the right modem to solve 4.3 TW-Based Rom`s failure of losing data-conection while screen is off)
1) go to Google Play Store and instal Tasker
2) go to Google Play Store and instal Secure Settings (Pic 1)
3) launch Secure Settings and instal Helper 1.2.3 ( Pic 2)
4) Open Tasker and create a new task e.g. "2G off" choose plugin " Secure Settings" ( Pic 3)
5) Scroll down to " LTE" and mark " toggle" and save ( Pic 4)
6) Save Task and make a second Task with the name e.g. " 2G on" with exact the same settings
7) Use my Tasker Settings and change Task form " HSDPA off" to your Task 2G off and "HSDPA on" to your Task "2G on"
Have fun.... cheers
Pic 1) Secure Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pic 2) Helper Screen
Pic 3) Choose Plugin " Secure Settings"
Pic 4) Mark "toggle"

neunzehn77 said:
7) Use my Tasker Settings and change Task form " HSDPA off" to your Task 2G off and "HSDPA on" to your Task "2G on"
Click to expand...
Click to collapse
i believe u got it the other way around, hdspa off --> 2G on and hdspa on --> 2G off
one question though, if i still choose to use ur task, can i use it instead of changing it?
i'm using a TW-based custom rom
thx

neunzehn77 said:
Guide for TW-based Custom-Roms ( Echo-Rom,...)​
First of all is: You need a custom rom TW-based e.g. Echo, Omega, ( be sure to use the right modem to solve 4.3 TW-Based Rom`s failure of losing data-conection while screen is off)
1) go to Google Play Store and instal Tasker
2) go to Google Play Store and instal Secure Settings (Pic 1)
3) launch Secure Settings and instal Helper 1.2.3 ( Pic 2)
4) Open Tasker and create a new task e.g. "2G off" choose plugin " Secure Settings" ( Pic 3)
5) Scroll down to " LTE" and mark " toggle" and save ( Pic 4)
6) Save Task and make a second Task with the name e.g. " 2G on" with exact the same settings
7) Use my Tasker Settings and change Task form " HSDPA off" to your Task 2G off and "HSDPA on" to your Task "2G on"
Have fun.... cheers
Pic 1) Secure Settings
Pic 2) Helper Screen
Pic 3) Choose Plugin " Secure Settings"
Pic 4) Mark "toggle"
Click to expand...
Click to collapse
the 2g did not work, nor the stock tw rom, not in miui. My s4 is the i9500.

It would be nice if you will do a video tutorial to it,
even without voice commentary.
Because I do not understand the point with tasker plugins.
Cheers

But so with a TW ROM is it not possible to switch 3G to 2G and vice versa? Is it only possible to deactivate data traffic?

kenn7 said:
i believe u got it the other way around, hdspa off --> 2G on and hdspa on --> 2G off
one question though, if i still choose to use ur task, can i use it instead of changing it?
i'm using a TW-based custom rom
thx
Click to expand...
Click to collapse
I hope i understand your post correct...
The difference between CM / AOSP / AOKP and TW custom rom is, that you are able to choose directly 2G on/off ..for example:
On CM / AOSP /... you could use Tasker to switch directly without any tool ( e.g.Secure Setting ) between the different network-modes. take a look on picture 1- 3
On TW-based custom rom, you`ve only the choice to " toggle" ( with tools like Secure Setting) the network-modes. This means that you coulden`t define exactly the network-mode! You are only able to toggle the mode for example :
You are on 2G/WDMC/LTE the next "modus is "2G"... so if the task starts it will toggle from 2G to 2G/WDMC/LTE... if the SAME task runs again it will toggle from 2G/ WDMC/LTE to 2G...
You could use my " Taker settings" from first post but you have to change the task "HSDPA on" and "HSDPA off" to "toggle" like I explained it on post 13...
cheers
CM / AOSP / AOKP direct Settings to define network-mode​

Graivite said:
It would be nice if you will do a video tutorial to it,
even without voice commentary.
Because I do not understand the point with tasker plugins.
Cheers
Click to expand...
Click to collapse
Sorry mate.. english is not my nature language.. and my school english is about 20 years ago... so it makes no sense .. but alternativ i could make a screencast but ONLY on KitKat CM / AOSP / ... please take a look at the tutorials about tasker how to create new tasks... SORRY
Here is a Link to an easy tutorial KLICK
cheers

ktm_91 said:
But so with a TW ROM is it not possible to switch 3G to 2G and vice versa? Is it only possible to deactivate data traffic?
Click to expand...
Click to collapse
Yes and No... you could toggle the network-mode ( root + custom TW-Rom like echo-rom, omega-rom,... + Secure Settings)
Please take a look at post #18
cheers

Something are turning on data transfer

Hello
I am using latest .93 firmware and i have noticed strange thing: something are turning on data transfer and then disable it.
My data trasfer is turned off, after disabling i hide the notification "data trasmission in cellular is turned off" but after some time when phone is inactive the notification appears and seems that i got charged by using data.
The monitors doesn't show any info which app using data transfer.
Are You experienced this ?
Is there any way to check logs which application enabling data transfer / how to block it ?
Seems even if i block cellular data for any app the connection to network is made and few kilobytes pass through.
Do You have any ideas ?

jishek said:
Hello
I am using latest .93 firmware and i have noticed strange thing: something are turning on data transfer and then disable it.
My data trasfer is turned off, after disabling i hide the notification "data trasmission in cellular is turned off" but after some time when phone is inactive the notification appears and seems that i got charged by using data.
The monitors doesn't show any info which app using data transfer.
Are You experienced this ?
Is there any way to check logs which application enabling data transfer / how to block it ?
Seems even if i block cellular data for any app the connection to network is made and few kilobytes pass through.
Do You have any ideas ?
Click to expand...
Click to collapse
I don't have that problem at all I'm on 33.2.A.2.93 myself, is the background data turned off for each and every app go to settings data usage and click on each and every app in the list for data+WiFi and set the slider at the bottom to the on position. The notification you get to say that data is disabled that looks like a small globe will come and go on its own anyway usually when you wake up the xa it's how it is it doesn't mean it has actually used any data it's to remind you it's off
Have you also turned the Bluetooth+WiFi always scanning for connections Inc when they are actually turned off. Go to settings location and tap the three dots top right turn both sliders to the off position.
This should stop any background data being used and won't effect the way any of the apps work
Sent from my Xperia XA using XDA Labs

jishek said:
Hello
I am using latest .93 firmware and i have noticed strange thing: something are turning on data transfer and then disable it.
My data trasfer is turned off, after disabling i hide the notification "data trasmission in cellular is turned off" but after some time when phone is inactive the notification appears and seems that i got charged by using data.
The monitors doesn't show any info which app using data transfer.
Are You experienced this ?
Is there any way to check logs which application enabling data transfer / how to block it ?
Seems even if i block cellular data for any app the connection to network is made and few kilobytes pass through.
Do You have any ideas ?
Click to expand...
Click to collapse
+1 sometimes !

The bluetooth, wifi, cellular(agps) location helpers are OFF.
Trying for now not to disable all cellular data(the switch to block all traffic) because i am trying to indentify app that cause problem.
I get used to manually turn on and off cellular data and would like to keep that way with this phone.
'thing' that turn on data make me nuts.
"small globe notification" appeared once in last half day - t-mobile app says usage of 200kb but Data Usage Monitor does show nothing

I think that issue depend on signal strength.. Always when back from basement which is located underground i had that notification about mobile data.. Also in forest, when signal is gone or rly poor.
But had no idea which app is responsible for that. Also trying few times turn off notifications in random sys apps and nothing so far..

The beggining of the end...
The telegram app shows notifications too, strangw notifications, why? The app is not listed on the detailed ps list, is not running anything related to telegram, ate least the unrecognized service that poped up the notification.
This is new method they are using.
Is not online, but the notifications is poping up.
Called as Multidex odex(or dex from the app) and cached secondary-dexes provided by them when we last tine was online.
We ended and closed the app, but, the secondary dexes are in the Memory opened
Someday i was searching why my apps are all closed , but the ram is sluggy and filled?
This is why.
Preventing yourself agains these new kind of apks before installing.
This may contain virus.
This is destroying the cpu and the ram.
These secondary dexes processes are hidden, and unkillable (unless i root and forbid services)
Nothing is turning on the data.
The cached dexes are running in hidden background, showing the notifications that was not readed when was the app online.
This is a serious damage menace.
I disagree with this, after i discovered this, now, i am denying packages with Multidex inside.
Sent from SomeFon
---------- Post added at 10:15 PM ---------- Previous post was at 09:59 PM ----------
I forgot to mention:
Imagine:
I am running a newsapp, with fully adblock in action.
They will search a "V".
They creates a temporary secondary-dex, when my installation id is on line reading their news, the cached dex is , for exampling: deleting my pictures, uploading something mine to their servers, deleting musics, corrupting files, etc.
due to the secondary dex is updated periodically... on cache, free for do what they want do on my device...
They found "V" Vengeance
Because i am Ad blocker
Only because this.
This is why the RootCloak was created.
To hide root and commands that some apps runs in hidden background
I tried search how to forbid this Multidexes apps.
But untill now, the solution is
Not install.
Check the package before installing and read the Manifest.xml about the multidex version.
If no multidex tag found, is safe apk.
Remember the Quadrooter.
They may creates a secondary-dex for destroy the gpu easyly.
Sent from SomeFon

Rafixxxx said:
I think that issue depend on signal strength.. Always when back from basement which is located underground i had that notification about mobile data.. Also in forest, when signal is gone or rly poor.
But had no idea which app is responsible for that. Also trying few times turn off notifications in random sys apps and nothing so far..
Click to expand...
Click to collapse
Yes, you are right! I have checked that.
That notification reappears when i lost signal and get it back. Appears also when i turn on airplane mode and then switch it off.
So nothing actually switch on cellular data BUT ...
i found what cause the problem
it's localization
I have it enabled BUT helpers are switched OFF (wifi+cellular) and bluetooth but it still using AGPS.
When i use app that use localization - for example speedtest app (using wifi) then localization icon appears and a moment later two arrows (up/down) appear on gsm signal.
so the question is :
How can i disable AGPS ?? (settings -> localization -> three dots -> scanning -> both options are OFF)
Please someone check if You have same problem (turned agps off and using app with localization and celular data disabled you get two arrows on gsm signal)
EDIT: The mode of GPS is: only device. Note that evey switch off and on it defaults to best accuracy.
When i make sure it's only GPS (agps disabled) and helpers are off and run speedtest with localization it STILL using agps
BUG ?

The OS itself downloads data too, even on rooted.
100 per month going where ?

hp6830s said:
The OS itself downloads data too, even on rooted.
100 per month going where ?
Click to expand...
Click to collapse
Yes but android OS doesn't use data traffic when data traffic is disabled.
AGPS does

Solved
Problem was resolved by SONY's support:
Selecting device only will not disable assisted start on the GPS. It only disables location by WiFi, mobile network and bluetooth.
What you can try is to go to Settings -> More -> Mobile networks -> Access Point Names. Here check the APN type on all your APNs. If you have "supl" on the APN-type, try to remove this. Then turn off mobile data or connect to WiFi and see if it still uses the mobile network.
Click to expand...
Click to collapse

Apn type says - default, supl. But there is no way to change it.Its greyed.
I think the only way is to dissable 4g (when not using the phone or when wi fi is active) , and remain on H+, for me its free. And that way will not lose my 1 Gb quota.

hp6830s said:
Apn type says - default, supl. But there is no way to change it.Its greyed.
I think the only way is to dissable 4g (when not using the phone or when wi fi is active) , and remain on H+, for me its free. And that way will not lose my 1 Gb quota.
Click to expand...
Click to collapse
I have exactly the same issue. When I clicked on the APN type, I got a free text box and I didn't know what to type in. In the end I deleted the APN. This obviously means that I can't use mobile data when I want to. This is very frustrating and seems like a bug. Please post if you find a solution...