Database Info

New samfirmware europe rom 5800XWJPF ## CSC = I5800XENJP1

hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
password : samfirmware.com
enjoy

haree said:
hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
enjoy
Click to expand...
Click to collapse
did you try this?
And yeah password : samfirmware.com

rudolf895 said:
did you try this?
And yeah password : samfirmware.com
Click to expand...
Click to collapse
no buddy i did not and yes pass word is as u had mentioned

haree said:
hi
new firmware on samfirmware for europe
it is : 5800XWJPF ## CSC = I5800XENJP1 dated : 11th April 2011
link : http://hotfile.com/dl/115503635/964b140/I5800XWJPF_XENJP1_XXJP4.rar.html
password : samfirmware.com
enjoy
Click to expand...
Click to collapse
Hey haree, I am from India. I still haven't flashed Froyo on my phone still using stock 2.1. I was thinking of flashing XXJPM. Should i go ahead with that or should i try the XWJPF??

android_murphy said:
Hey haree, I am from India. I still haven't flashed Froyo on my phone still using stock 2.1. I was thinking of flashing XXJPM. Should i go ahead with that or should i try the XWJPF??
Click to expand...
Click to collapse
hi
i think u have not done ur reading their is already an official update from samsung in india it is DDJP2 u can update via kies or go to the below link and take it from my drop box u can flash this via odin
Link : http://dl.dropbox.com/u/10031257/I5801DDJP2.rar
password : samfirmware.com (flash this via odin as a onepack)

haree said:
hi
i think u have not done ur reading their is already an official update from samsung in india it is DDJP2 u can update via kies or go to the below link and take it from my drop box u can flash this via odin
Link : http://dl.dropbox.com/u/10031257/I5801DDJP2.rar
password : samfirmware.com (flash this via odin as a onepack)
Click to expand...
Click to collapse
Oh i know that is available. But it's just that it has too many issues with it right now: Swype not working, FCs, Crackling sounds in audio, etc. So i wanted to flash a FW that is stable.
So i asked around a bit and found out that JPM is the most stable. But then i saw on samfirmware that they released XWJPF like 12 days back. And i haven't found anyone who has used it so far to get their input. So was just wondering which one to flash.
PS - never flashed a FW before, but been reading enough for the past two days to be comfortable enough to try it.

well i wud suggest u go for i5801 zhjpf......its the only rom which dont have the choppy call bug.

android_murphy said:
Oh i know that is available. But it's just that it has too many issues with it right now: Swype not working, FCs, Crackling sounds in audio, etc. So i wanted to flash a FW that is stable.
So i asked around a bit and found out that JPM is the most stable. But then i saw on samfirmware that they released XWJPF like 12 days back. And i haven't found anyone who has used it so far to get their input. So was just wondering which one to flash.
PS - never flashed a FW before, but been reading enough for the past two days to be comfortable enough to try it.
Click to expand...
Click to collapse
hi
i have used DDJP2 for a long time more than 2 weeks except for the swype not working(i dont use it so im OK) i have faced no problems at all as u have not flashed any rom till date id suggest u try flashing this vie kies and then decide what u want latter on
goodluck happy flashing

@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??

hi
i dont understand ur internet problem
but if u want to flash via odin read the link given below in detail before attempting anything via odin off ur virus scan while using odin and log in as admin while using odin
Link : http://forum.xda-developers.com/showthread.php?t=873645
yes their is the risk but i have flashed the same a few time in the last week
i had no problem but the risk is urs i dont know how to remove the boot & sbin sorry i cant help u their
and yes u will loose ur phone data so back up ur data before proceeding to flash the rom
goodluck
android_murphy said:
@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??
Click to expand...
Click to collapse

haree said:
hi
i dont understand ur internet problem
but if u want to flash via odin read the link given below in detail before attempting anything via odin off ur virus scan while using odin and log in as admin while using odin
Link : http://forum.xda-developers.com/showthread.php?t=873645
yes their is the risk but i have flashed the same a few time in the last week
i had no problem but the risk is urs i dont know how to remove the boot & sbin sorry i cant help u their
and yes u will loose ur phone data so back up ur data before proceeding to flash the rom
goodluck
Click to expand...
Click to collapse
did all of that... flashed using odin ... got a PASS ... wasn't booting for 50 mins (stuck at samsung glowing flash logo, so someone suggested rebooting and wipe cache/data ... but when i pressed power + home + volume up ... it showed a screen - "Forced Upload by Key Pressing" with an android logo next to it... nothing was happening so i booted again and now stuck at the GT-I5801 logo... Please help ... Please tell me my phone isn't bricked...

Don't worry but press vol up+ vol down + home + power
Get to recovery and wipe data and cache .
Sent from my GT-I5800 using Tapatalk

android_murphy said:
did all of that... flashed using odin ... got a PASS ... wasn't booting for 50 mins (stuck at samsung glowing flash logo, so someone suggested rebooting and wipe cache/data ... but when i pressed power + home + volume up ... it showed a screen - "Forced Upload by Key Pressing" with an android logo next to it... nothing was happening so i booted again and now stuck at the GT-I5801 logo... Please help ... Please tell me my phone isn't bricked...
Click to expand...
Click to collapse
hi
u have to be on DDJ6(ie original asia india 2.1) while flashing this or it wont work
assuming u are talking about DDJP2

I´ve flashed it yesterday and not perceived differences with JPM yet

android_murphy said:
@haree
ok thanks...
Just to be clear you are not having the crackling sound bugs at all? Swype i can live without (there is a fix for that too though).
I can't upgrade via Kies coz the internet connection that i have blocks it. But i do have the one package tar file for DDJP2, so i can flash through odin.
But i have read that it is safer to flash without the bootloader, i.e., no chance of bricking it. So i was wondering if anyone has a build for JP2 with all individual files, that'd be great. Or if i can make it using the one package file someway, that'd be even better.
Oh and will flashing with ODIN delete my data or leave it intact??
Click to expand...
Click to collapse
just flash it man
the probablility of bricking is as low as burning yourself with a smoke

It didn't boot for me until I flashed JG6 eclair ROM first.
Can't see much difference to JPM.. except that It's missing finnish language. Has all of the slavic languages, though.

Pinak.ahuja said:
Don't worry but press vol up+ vol down + home + power
Get to recovery and wipe data and cache .
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "​
with some other stuff also

android_murphy said:
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "​
with some other stuff also
Click to expand...
Click to collapse
hi
we are really going off topic ill delete all the off topic once ur problem is solved
wipe data will not take more than a few mins the same screen will say wipe factory data finished or try pulling out ur batter putting it back(this worked for me once) in and then go to download mode and flash the original 2.1 again if successful then go back in to download mode and flash the 2.2
hope it helps

android_murphy said:
Hey... how long does the wipe data/factory reset take? .... been doing it for past 40 mins ... doesn't even have a progress bar that i can see ...
Just showing
" -- Wiping data...
Formatting DATA:... "​
with some other stuff also
Click to expand...
Click to collapse
That means It's stuck. Should take about ~2 mins at max.
Flash eclair JG6 first, and then this one. Password is samfirmware.com

thanx all for helping ... finally got irritated ... flashed JG6 and then JPM ... working sweet ... JP2 can rot in hell ...

[q] i9001 xxkf8

Hey guys,
I want to downgrade from 2.3.4 to 2.3.3 on a Samsung Galaxy Plus.
Where can I find the I9001 XXKF8 firmware, because someone told me that this is the original, and please tell me wich tutorial to use.
Thaks a lot.

have u check samfirmware? and u can flash with odin.

XXKF8
http://supportsamsung.pl/f1416/rom-i9001-rom-open-i9001xxkf8_oxakf1-6444/

annoymous1234 said:
have u check samfirmware? and u can flash with odin.
Click to expand...
Click to collapse
What to do ?
Please post me a corect tutorial link because I have finded 3 diffenrent tutotials.

AsafteiLaurentiu said:
What to do ?
Please post me a corect tutorial link because I have finded 3 diffenrent tutotials.
Click to expand...
Click to collapse
The link for the ROM is posted above, download that. Extract that, the password is linked to the post.
-Download ODIN Multidownloader 4.43. Link: http://www.google.fi/url?sa=t&rct=j...n4WHBA&usg=AFQjCNEnkhKjmSRxlKLFcVNdXh8nnFxU1A
-After it has downloaded, extract it anywhere u want (i suggest desktop, easier)
-RUN ODIN.
-Power off your phone.
-Put your phone into downloading mode. Hold together: Power+Volume Down+Home (phone boots to Downloading mode)
-Connect your phone to PC via USB cable.
-Wait for the drivers to install. After that, in ODIN, one of the top line "bars" should turn yellow and some text should appear there.
-Download the AriesVE.ops file and check it as OPS. Then check one package from the top left. Link to download: http://forum.xda-developers.com/attachment.php?attachmentid=770410&d=1320332631
-The ROM you've downloaded, check it as one package. Then click flash.
-Flashing will take about 9 minutes.
-Enjoy!

Thank`s dude .. I just hitted your thank`s button

Wich part must load, because when I extracted the firmware I founded 2 files:
SMD_CSC_GT-I9001-MULTI-CSC-OXAKF1_EMMC.smd 539MB
and
SMD_I9001XXKF8_I9001XXKF8_CL310526_REV00_user_low_ ship_EMMC.smd 50MB
Or I don`t extract and loar the archive ?
Thanks
Edit: It was the larger file. Thanks all.

So ... please tell me .. why in Kies I am receiving the message: This version of software can`t be upgraded .. or something like this ...

AsafteiLaurentiu said:
So ... please tell me .. why in Kies I am receiving the message: This version of software can`t be upgraded .. or something like this ...
Click to expand...
Click to collapse
Because there is no official update for your region or carrier. Just use odin to update

And when will be I will be able to update ... ?

AsafteiLaurentiu said:
And when will be I will be able to update ... ?
Click to expand...
Click to collapse
Right now if you want to. Theres already a thread on how to flash roms with odin. Reading strongly recommended

mikeeo019 said:
Right now if you want to. Theres already a thread on how to flash roms with odin. Reading strongly recommended
Click to expand...
Click to collapse
I want to update with the next official firmware ...
What I have to do ?

AsafteiLaurentiu said:
I want to update with the next official firmware ...
What I have to do ?
Click to expand...
Click to collapse
All the ROMs in this forum are stock roms from different carriers.
Edit: except Cranium RC3
Just read the guide. There's damn step by step instructions.

But I want it original from Kies ... understand ?

then connect ur device with kies and wait for an update

AsafteiLaurentiu said:
But I want it original from Kies ... understand ?
Click to expand...
Click to collapse
The ROMs here are similar to those updated via Kies. Maybe some applications can be different. I mean it can take quite long to get a regional update. If you're worried about your warranty, just take a backup of your current system.

[Firmwares] Stock ND9 & NE2 firmwares for T230NU

Stock .tar firmwares for Galaxy Tab 4 7" T230NU Tablet
Latest Firmware Version Download
NE2 Click Here
Older Firmware Version Downloads
ND9 Click Here
Odin Downloads
Click Here
Installation Instructions
1. Download firmware
2. Download Odin (3.07 or 3.09 doesn't matter)
3. Put tablet into download mode by:
Turning tablet off.
Hold home button and volume down
Press and hold power button til Download mode warning
Release keys
Press volume up
4. Run Odin
5. Load firmware tar into PDA
6. Connect Tablet to pc via usb
7. Click Start
Firmwares provided by Sammobile.com Uploaded to Mega for faster download and no need for an account
​

Knox Bootloader?
Do these include knox? My tablet does not have it. I am on nd5

ericf4646 said:
Do these include knox? My tablet does not have it. I am on nd5
Click to expand...
Click to collapse
Didnt know there was an ND5. There wasnt even an ND5 when I downloaded the kernel source code from samsung. And nope, There like 2 knox files in the entire firmwares which is just left behind crap I believe. Absolutely does not give you a knox bootloader and crap tho. Do make sure your tablet is a T230NU model and not just a T230 model.

Thanks a lot for this. So if I'm rooted and want to install system updates I would first backup data to sd card via titanium ,(or to pc?) , then factory restore via settings, Odin with this firmware, install updates, then vroot + terminal supersu, then restore backups.... correct? I'm still trying to figure out what bloatware is safe to remove...a guide on how to clean a out of the box tab 4 7.0 would be greatly appricated....

Will this Root my T230NU?
Hi, I am new to the Android market and I was wondering if this "stock" image will root my Samsung Galaxy 4 T230NU.
I am a formerly iDevice owner and I am quite familiar with Jailbreaking.
Any help would be greatly appreciated. Thanks.

Hello Ed,
I'm kind of new as well however I can tell you that this process will not root it. In my case, because I updated the software I had to use the stock Rom in order to downgrade and then root it. ShinySide explains the.. Rooting procedure in another post

thanks!

The downloads dont work
I try to donaload the file and it just stops and goeas from one percent to another and never finishes.....is their another way to get these files besides that crappy website?

MoEMuRk said:
I try to donaload the file and it just stops and goeas from one percent to another and never finishes.....is their another way to get these files besides that crappy website?
Click to expand...
Click to collapse
Sure sammobile. It's super fast too.

I tried that 2
ShinySide said:
Sure sammobile. It's super fast too.
Click to expand...
Click to collapse
i had someone try to get me a link their and it takes almost an hour to download it and it wont even let me extract it............

MoEMuRk said:
i had someone try to get me a link their and it takes almost an hour to download it and it wont even let me extract it............
Click to expand...
Click to collapse
I just downloaded firmware from mega. There's nothing wrong with it.

It stops and does not work for me
---------- Post added 17th November 2014 at 12:33 AM ---------- Previous post was 16th November 2014 at 11:40 PM ----------
I had kies work for me just got it to install the firmware for me....I know how to get root any preferences for a Rom yet?

Works Great!
MoEMuRk said:
I try to donaload the file and it just stops and goeas from one percent to another and never finishes.....is their another way to get these files besides that crappy website?
Click to expand...
Click to collapse
I just used these links to download the firmware and they worked great. Mega took 1/3 as much time to pull from as Sammobile. Thank you Shinyside! You are awesome. If I wasn't a broke college kid I'd would def donate.
---------- Post added at 01:17 AM ---------- Previous post was at 01:06 AM ----------
So I rooted my Tab 4 7" and then decided to switch to Nexus 7 and sell my Tab 4. Both great devices but the specs and updates draw me to try Nexus after the Tab. Anyway, I went to Sammobile to get the Stock rom and inadvertently ended up with the Nook version. OOOPS. Had to reflash but the second firmware I downloaded from Sammobile (at about 1 hour each, ugh) kept failing. Even after wiping the Cache and resetting I could not flash with Odin. Tried placing the image on the SD and installing in Recovery and still no luck. Then I turned to the ONLY source for self support of Android and found ShinySide with the stuff I needed. Downloaded with the Mega link which took 20+ min instead of an hour and it flashed straight away and my Tab 4 is back to being a Tab 4 instead of a Nook. Just wanted to give props to ShinySide for his efforts on behalf of the community and his patience to put up with noobs even when they do/say silly stuff!

Thank you so much!!
Ive been trying to download this file from all these crappy sites and they keep timing out thank you so much.

Thanks for the great info.
Will this restore stock recovery as well as remove root?
I need to return my device and thus need it fully stock
Thanks

fidorulz said:
Thanks for the great info.
Will this restore stock recovery as well as remove root?
I need to return my device and thus need it fully stock
Thanks
Click to expand...
Click to collapse
Yes

What's the difference between the two images ND9 & NE2?

Pikeking83 said:
What's the difference between the two images ND9 & NE2?
Click to expand...
Click to collapse
Actually they're both out of date (2014), take one of these instead (2015):
--SM-T230NU UEU0AOD1 XAR Region (USA)
--SM-T230NU UEU0AOD1 XAC Region (Canada)
--Nook Edition SM-T230NU OVU0AOG1 BNN Region (Nook Edition)
@ShinySide feel free to add these to the OP if you want

tried rooting and somone got stuck at loading screen with device name and powered by android screen....stuck there and got odin to load and apparently flash the stock but im still stuck...

thank you
HI so i tried installing twrp recovery for my SM-t230NU And it got stuck in bootloop after trying to load custom recovery. Not a single Tar file md5 file worked until i got this rom and USED odin to install it. Odin just kept crashing on me till I got here and used the md5 file provided. It pushed the files while in download mode and rebooted and even still had all my apps and email going.
Again thank you so much and please reply if you have the same device and need help. I thought i bricked my Christmas present.
---------- Post added at 05:42 AM ---------- Previous post was at 05:38 AM ----------
terrorine said:
tried rooting and somone got stuck at loading screen with device name and powered by android screen....stuck there and got odin to load and apparently flash the stock but im still stuck...
Click to expand...
Click to collapse
Any luck i finally got my unbricked after 16 hours of searching.

Installed TWRP on StraightTalk SCH-S968C Samsung Galaxy S III - now no OS! - resolved

I have a rooted StraightTalk SCH-S968C Samsung Galaxy S III (with the stock AOSP ROM) that I just screwed up. I had used EZ-Recovery to flash TWRP 2.2.0 to the phone. Now TWRP says there is no OS! I can only boot into TWRP - nothing else. It won't even let me power-down the phone. Is there some way I can recover from this, or do I now have a very expensive electronic brick (that runs TWRP)? I have adb installed on my laptop and I know it works, so that's one possible route to recovery. Any help would be much appreciated!

ScottDB said:
I have a rooted StraightTalk SCH-S968C Samsung Galaxy S III (with the stock AOSP ROM) that I just screwed up. I had used EZ-Recovery to flash TWRP 2.2.0 to the phone. Now TWRP says there is no OS! I can only boot into TWRP - nothing else. It won't even let me power-down the phone. Is there some way I can recover from this, or do I now have a very expensive electronic brick (that runs TWRP)? I have adb installed on my laptop and I know it works, so that's one possible route to recovery. Any help would be much appreciated!
Click to expand...
Click to collapse
I'm pretty sure it's possible to return it completely to stock with the COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV09_user_low_ship.tar.md5 file through Odin. I just to happen to have the file right here.. small warning though, it's 1.2 gigs.
https://mega.co.nz/#!gRI3DD5L!dRW8ORzfQI5j1JyKHVBTNifomPCXoqL14B9GF4oxvQY

aekel87 said:
I'm pretty sure it's possible to return it completely to stock with the COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV09_user_low_ship.tar.md5 file through Odin. I just to happen to have the file right here.. small warning though, it's 1.2 gigs.
https://mega.co.nz/#!gRI3DD5L!dRW8ORzfQI5j1JyKHVBTNifomPCXoqL14B9GF4oxvQY
Click to expand...
Click to collapse
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!

Deleted.

ScottDB said:
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!
Click to expand...
Click to collapse
Thank you!!!! I just had the same problem. However even when using cwm i get errors in the recovery. Unable to mount anything or do anything besides reboot. Any ideas?

need stock Firmware
Have any idea where i can get this file? Ive bricked my phone too. Durnnit!

iamwaynes said:
Have any idea where i can get this file? Ive bricked my phone too. Durnnit!
Click to expand...
Click to collapse
This is the h1 stock you need. type this in google you should find the download if not I have it.
COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV0
Dont use e-z recovery. I had the same problem neither cwm or twrp from ez recovery worked and then cwm said no os on my phine so I flashed that file from download mode and was back to stock.

How did u find a recovery that worked mine is saying the same thing
Sent from my SM-N900T using Tapatalk

iamwaynes said:
How did u find a recovery that worked mine is saying the same thing
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1771398
In that thread go down to method 2 of getting a custom recovery. I downloaded cwm touch from the link there and then installed it with android terminal emulator using the codes that it says to type in. I tried to look up that stock rom but I didnt find it. Its on the forum somewhere in a thread about how to root the straight talk s3 and how first you need to download and flash the h1 baseband stock rom

Thanks I found the stock rom fixing it now.
Sent from my SM-N900T using Tapatalk

iamwaynes said:
Thanks I found the stock rom fixing it now.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Ok I've re rooted and tried to install recovery. Odin put it in wrong place. Says no operating system . What now?
Sent from my SM-N900T using Tapatalk

iamwaynes said:
Ok I've re rooted and tried to install recovery. Odin put it in wrong place. Says no operating system . What now?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Have you gotten recovery installed and straightened out yet?
Let me know if you need some help, tell me where you're at and what you've got going on with what you have.

I returned phone to stock. The recovery wasn't in the right place obviously. So that's where I am . Stuck back at stock. Thanks for any help you can give.
Sent from my SM-N900T using Tapatalk

iamwaynes said:
I returned phone to stock. The recovery wasn't in the right place obviously. So that's where I am . Stuck back at stock. Thanks for any help you can give.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Are you on stock not rooted or you are rooted?
Do you have stock recovery or custom.
I can get you to wherever you need or want. Tell me what you need or where you'd like to be.

Droidriven said:
Are you on stock not rooted or you are rooted?
Do you have stock recovery or custom.
I can get you to wherever you need or want. Tell me what you need or where you'd like to be.
Click to expand...
Click to collapse
I have combined 2 s3's to make one good one. This is the proper thread for the model of the chipset. The phone has been worked on buy someone who only thought they were a genious. I've found traces and from surfing the forums I'm pretty sure I know what they did even. I'm gonna grab these stock images and flash back to stock. I just wanted to put a word in now to see how dead this thread is. BTW just for the record easy safe root is achievable with safroot for Att g s 4. I've confirmed that. Root is no issue. Modem drivers are jacked up. I want what I have now with WiFi in tact and custom recovery. Just wanted to get the word in in case I hit a wall with recovery as I am now before the flash to stock. Thanks in advance for any help. Sorry for the ramble
---------- Post added at 07:23 AM ---------- Previous post was at 07:03 AM ----------
ScottDB said:
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!
Click to expand...
Click to collapse
Does anyone have a good link for h1 stock. All the links I can find including aa51 are dead. I need to go stock to fix the modem. I can handle everything from there I just need stock and I've trolled XDA , aa51, and several others. All links are dead. Probably for a long long time . any help is greatly appreciated
---------- Post added at 07:42 AM ---------- Previous post was at 07:23 AM ----------
sazendrak said:
I have combined 2 s3's to make one good one. This is the proper thread for the model of the chipset. The phone has been worked on buy someone who only thought they were a genious. I've found traces and from surfing the forums I'm pretty sure I know what they did even. I'm gonna grab these stock images and flash back to stock. I just wanted to put a word in now to see how dead this thread is. BTW just for the record easy safe root is achievable with safroot for Att g s 4. I've confirmed that. Root is no issue. Modem drivers are jacked up. I want what I have now with WiFi in tact and custom recovery. Just wanted to get the word in in case I hit a wall with recovery as I am now before the flash to stock. Thanks in advance for any help. Sorry for the ramble
---------- Post added at 07:23 AM ---------- Previous post was at 07:03 AM ----------
Does anyone have a good link for h1 stock. All the links I can find including aa51 are dead. I need to go stock to fix the modem. I can handle everything from there I just need stock and I've trolled XDA , aa51, and several others. All links are dead. Probably for a long long time . any help is greatly appreciated
Click to expand...
Click to collapse
Finally found it here
https://forum.xda-developers.com/showthread.php?t=2516498&page=28

LRA ☆SM-G920R6☆ Root without tripping Knox Counter

Hi. I'm finally can root my SM-G920R6. I use the KingRoot.apk the v4.80 and root the phone. But it's not full root. Them I use the SuperSuMe.exe on my PC to remove all the KingRoot app and install the official SuperSu.apk The program install it's self. And now we can install the correct binary and reboot the device and don't lose root... ohh and my Knox still 0x0... =) XD:laugh: :victory: :highfive:
Links:
●KingRoot v4.80
●SuperSuMe. for PC
Sincerely I don't know if full root or not. But for me is working. And other things I don't know is full knox disabled. The SuperSuMe block the knox in one of the process but I don't know if is disabled at all or not.
I wish this can't help all the SM-G920R6 user. And don't want to avoid the knox warranty.
The only thing you can see is every time you BootUp your phone it say Custom.
The next thing I'm going to do is make a full backup with FlashFire app because mi firmware not appear in SamMoblie. If one Dev can make something with this backup for make custom roms or something good for this devices model.
my phone info:
Android Version : 5.0.2
Baseband : G920R6WWU1AOE4
Build Number : LRX22G.G920R6WWU1AOE4
Hardware Version : G920R6.02
I'm not a good English speaker so I apologize my errors..

P.S.
Sorry I'm not a Dev. this is my first Thread and I do this for helping.

This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.

Reasons I hate you I guess ?
You are a real piece of **** and a cancer to those with A ACTUAL SAMSUNG-SMG920V.
I don't even know why you posted this here you don't even have a SM G920R6.
Seriously you just made me give up hope once again on getting root on my SAMSUNG-SMG920 on android 6.0.1 :crying:
Sincerely yours ( Another piece of **** with this **** tastic phone that dies in 3 hours and you can do jack **** with)
P.s. It also dies in 3 hours no matter what I install on it no matter on many resource manager apps I use, it just ****ing dies.
P.s.s. Sorry for swearing so much...

hoppits said:
You are a real piece of **** and a cancer to those with A ACTUAL SAMSUNG-SMG920V.
I don't even know why you posted this here you don't even have a SM G920R6.
Seriously you just made me give up hope once again on getting root on my SAMSUNG-SMG920 on android 6.0.1 :crying:
Sincerely yours ( Another piece of **** with this **** tastic phone that dies in 3 hours and you can do jack **** with)
P.s. It also dies in 3 hours no matter what I install on it no matter on many resource manager apps I use, it just ****ing dies.
P.s.s. Sorry for swearing so much...
Click to expand...
Click to collapse
Because my device is G920R6 originally and i want it back the 920F rom is barely compatible with my device as is and i want a stable rom made for my build and also to enlighten others of how i rooted this phone and what custom recovery is working for me. Even on 5.0.2 and an unstable rom my battery lasts 6+ hours of constant use so root is working fine for me.

So much hate.

yeah i see now this model phone is the ugly duck....
But some one have the factory firmware of this model flashable with odin. Thanks a lot.

Casper1619 said:
This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.
Click to expand...
Click to collapse
Hi. i found a factory SM-G920R6 Android 6.0.1 frimware... but this android version I'm rooted with the same cf auto root you used .
And I don't know remember were i downloaded the firmware.. But later I try to uploaded.

M3RS3 said:
Hi. i found a factory SM-G920R6 Android 6.0.1 frimware... but this android version I'm rooted with the same cf auto root you used .
And I don't know remember were i downloaded the firmware.. But later I try to uploaded.
Click to expand...
Click to collapse
Could you install the twrp recovery I mentioned and make a backup of the system and boot and post that?

Casper1619 said:
Could you install the twrp recovery I mentioned and make a backup of the system and boot and post that?
Click to expand...
Click to collapse
yeap.. but when I install the recovery the phone gave a glitch.. its flipping the touch response inverted.. and the only fix is with root. and use the app. phone info.apk for Samsung and use the secret code with root because it is blocked on the dialer.
but i have the backup for the new firmware. not the android 5.0.2

M3RS3 said:
yeap.. but when I install the recovery the phone gave a glitch.. its flipping the touch response inverted.. and the only fix is with root. and use the app. phone info.apk for Samsung and use the secret code with root because it is blocked on the dialer.
but i have the backup for the new firmware. not the android 5.0.2
Click to expand...
Click to collapse
That's exectly what I need I'm stuck on 5.0.2 and I want to upgrade back to 6.0.1 it's mainly the bootloader I need because no other marshmallow bootloaders work for this phone and the one I have is only for 5.0.2

Casper1619 said:
That's exectly what I need I'm stuck on 5.0.2 and I want to upgrade back to 6.0.1 it's mainly the bootloader I need because no other marshmallow bootloaders work for this phone and the one I have is only for 5.0.2
Click to expand...
Click to collapse
But i have the stock firmware flashable with odin. you have my same phone. SM-G920R6?

M3RS3 said:
But i have the stock firmware flashable with odin. you have my same phone. SM-G920R6?
Click to expand...
Click to collapse
Yeah if you could send it to me that would be awesome

Casper1619 said:
Yeah if you could send it to me that would be awesome
Click to expand...
Click to collapse
you can download send anywhere app in playstore and i cand send directly to you.
.....
ohhh let me check if i haved in the phone because i give my pc to one cousin to make some homework. and i dont haved right now.

M3RS3 said:
you can download send anywhere app in playstore and i cand send directly to you.
Click to expand...
Click to collapse
Alright I've got work then I'll be back

Casper1619 said:
Alright I've got it ready whenever you are
Click to expand...
Click to collapse
Give me some minute to go to my cousin house.. is near of my house to get the file and copy on my pendrive..

Casper1619
Sorry i go to uplode the two file. the BACKUP and the Stock Firmware 6.0.1 in MEGA and then i post the two links.. I promes... because the internet it come extremely slow... when i uploded the two file i posted ok...

M3RS3 said:
Sorry i go to uplode the two file. the BACKUP and the Stock Firmware 6.0.1 in MEGA and then i post the two links.. I promes... because the internet it come extremely slow... when i uploded the two file i posted ok...
Click to expand...
Click to collapse
Okay how long do you think it'll be?

Casper1619 said:
Okay how long do you think it'll be?
Click to expand...
Click to collapse
i don't know maybe for tomorrow.. have a good night.:good:

M3RS3 said:
i don't know maybe for tomorrow.. have a good night.:good:
Click to expand...
Click to collapse
Okay thanks you too