Related
Can I sommehow install Android 3.0 or 4.0 on my tablet. It has 1Ghz Cortex-A8 and 512MB RAM, 800x600 res. Please help. It is great device but with 2.3
If it is possible, tell me how to do it, how to root it, I will really try to do whatever it takes to upgrade it.
edin.dino.u said:
Can I sommehow install Android 3.0 or 4.0 on my tablet. It has 1Ghz Cortex-A8 and 512MB RAM, 800x600 res. Please help. It is great device but with 2.3
If it is possible, tell me how to do it, how to root it, I will really try to do whatever it takes to upgrade it.
Click to expand...
Click to collapse
I've just bought the same device.
It seems that only temporary rooting can be done ATM- /system is a cramfs image (not writable).
SuperOneClick gives shell root (via adb) but messes "internal sd" access
EDIT:
There is a prerooted custom firmware available- source (4pda.ru).
What you need:
-get Rockchip Batch Tool from HERE (contains USB drivers)
-get a firmware:
a) PMP3384BRU_20111206_V1.1.9_root -prerooted image, no other changes
b) PMP3384BRU_20111206_V1.1.9_root_607Mb_free - 607 MB for /data, prerooted, Golauncher, Gokeyboard, Adobe Reader, CoolReader, Dolphin browser HD, ButtonSaviour- only for RockChip Batch Tool flashing
How to flash:
1. fully charge your MultiPad
2. backup internal flash- it will be erased
3. unpack Rockchip Batch Tool and launch it as admin
4. press and hold Reset (on the back), plug USB cable, release Reset
5. there should be a popup asking for drivers- they are placed in Rockchip_Batch_Tool_v1.4\drivers\[windows version]. If there is no popup go to Device Manager and install drivers
6. load firmware .img file to Rockchip Batch Tool and click Update button
NOTE
PMP3384B is the same as PMP3384BRU, the only difference is initial localization (B= english, BRU= russian)
Working or no working ? Can you geave me TOOL_RK2918.zip ?
I've tested it, and it's fully working,
i've flashed PMP3384BRU_20120116_V1.1.9_Full_root_v2 (available at that link)
which is official 1.1.09 firmare with rw filesystem and down button reassigned to back, among other things
He gave you the tools, it's the first link
Still no info about 4.0? I have installed the PMP5080B_2.0.0_20120401 (has ICS) on it and the button worked as volume but the touchscreen doesn't respond. i use Rockchip Batch Tool
Im going to root him.I think nothing will hapend.
EDIT : Working, thanks !
Prestigio PMP3384B
Is it 3.0 or 4.0? Please let me know.
Greetings
Paul
gen_scheisskopf said:
I've just bought the same device.
It seems that only temporary rooting can be done ATM- /system is a cramfs image (not writable).
SuperOneClick gives shell root (via adb) but messes "internal sd" access
EDIT:
There is a prerooted custom firmware available- source (4pda.ru).
What you need:
-get Rockchip Batch Tool from HERE (contains USB drivers)
-get a firmware:
a) PMP3384BRU_20111206_V1.1.9_root -prerooted image, no other changes
b) PMP3384BRU_20111206_V1.1.9_root_607Mb_free - 607 MB for /data, prerooted, Golauncher, Gokeyboard, Adobe Reader, CoolReader, Dolphin browser HD, ButtonSaviour- only for RockChip Batch Tool flashing
How to flash:
1. fully charge your MultiPad
2. backup internal flash- it will be erased
3. unpack Rockchip Batch Tool and launch it as admin
4. press and hold Reset (on the back), plug USB cable, release Reset
5. there should be a popup asking for drivers- they are placed in Rockchip_Batch_Tool_v1.4\drivers\[windows version]. If there is no popup go to Device Manager and install drivers
6. load firmware .img file to Rockchip Batch Tool and click Update button
NOTE
PMP3384B is the same as PMP3384BRU, the only difference is initial localization (B= english, BRU= russian)
Click to expand...
Click to collapse
links are down, anyone have a working link to the firmware and tools?
Bricked it!
Any help would be much appreciated
I followed the instructions to the letter. After rockbatch finished I checked the tab and it wouldn't even turn on
if bricked
Bricked it too...
But i solved that very easy !!! Im so happy :laugh: I registered here just cause i wanna share this with others who have same problem
so....
Follow gen_scheisskopf 2nd post on this topic + you need to hold RESET button whole the time while Rockchip Batch Tool download firmware...
steps (only if you have bricked PMP 3384B):
1.Unzip PMP3384BRU_20111206_V1.1.9_root.zip and Rockchip Batch Tool.zip
2.Install drivers from Rockchip Batch Tool/driver folder
3.Open Rockchip Batch Tool.exe
4.Device is off,hold reset button 3,4sec. and put usb cable,release Reset button.
5.Now,if you install drivers properly from Rockchip Batch Tool folder (folder Drivers) you should see green light on 1. connected device in rockchip software...
6.FW PATH : (first option in this program)Pick this img - PMP3384BRU_20111206_V1.1.9_root.img
7.If firmware load success then do next step
8.Hit restore button and hold reset button(on your tablet) whole the time till process end.
9.Thats it...after success download firmware it will probably fail at next process -Checking firmware ,but nevermind,you have already unbrick your PMP and flash new ROM + now you have rooted ROM :victory: .
this works for me,but you need to hold reset button while process ONLY IF you have bricked pmp3384b!!!!
contact me on my mail [email protected] if you need more help.
This method successfully installs the CWM on the phone. CWM version supplied by ZOPO does not work. Use the CWM posted in the second link
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download Fully working English CWM from here http://www.4shared.com/file/16vuWyiU/recovery.html. The one posted in Zopo website does not work.
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Additional Info -
Install PDAnet from here http://www.junefabrics.com/android/download.php or Snappea from www.snappea.com to make your device get recognized when connected to the computer. Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
reserved
The CWM from taiwan101 for the 9300+ seems to be working fine. I was able to install .zip file from SD card. However the CWM is in Taiwanese, so if anyone can provide the CWM in English, thanks in advance
link for 9300+ CWM http://d01.megashares.com/dl/KicT315...M_Recovery.rar
UPDATE - Finally got a full working English CWM for ZOPO extracted from Mod ROM posted thanks to Kyrie1965. Tested and everything is working. Download from here http://www.4shared.com/file/16vuWyiU/recovery.html
vijayar said:
This method successfully installs the CWM on the phone. CWM as such works (able to navigate through the menus etc) but some of the function such as Install from ZIP, Backup etc, mount are not working, Gives an error Unable to Mount Sdcard !. Not sure if the issue is with CWM version supplied by ZOPO, need to try with other/older versions of CWM.
Please feel free to post links of CWM that works
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download latest CWM from the link provided in Zopo Website http://www.4shared.com/file/lp0t5E1t/cmw-recovery.html
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Click to expand...
Click to collapse
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
B rom error:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
help
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
miraguilar1 said:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Click to expand...
Click to collapse
Check your device drivers USB driver has not been installed properly. I faced this issue and after multiple attempts of reinstall of USB drivers the flash tool started working properly
Also you can try installing PDAnet from here http://www.junefabrics.com/android/download.php
Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
Note Connect the phone to flash tool first without battery, in options select with battery, press download after selecting the required file, when it says searching unplug the phone put battery back, dont switch on, plus back the usb. The flash tool should load the required file.
senlakshman said:
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
Click to expand...
Click to collapse
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
From where did you bought this mobile?
Does the imei start from 355,889,3535
Is it ips 1gb ram .
Sent from my GT-I9100 using xda premium
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
vijayar said:
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
Click to expand...
Click to collapse
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
plz also have a look at previous posts u will get your answer.
senlakshman said:
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
Click to expand...
Click to collapse
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Working
bhargav1991 said:
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
Click to expand...
Click to collapse
Confirmed working on 9300+
Follow the tutorial exactly as written.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
Israeleet said:
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Click to expand...
Click to collapse
This is a copy of cwm with the specific support for the MTK6577 used by the 9300+
So yes it safe.
---------- Post added at 10:46 PM ---------- Previous post was at 10:38 PM ----------
bhargav1991 said:
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
Click to expand...
Click to collapse
Make sure you removed the battery long enough from your phone.
You may also have to reboot your pc a couple of times.
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
vattmann said:
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Click to expand...
Click to collapse
Yessss , it did worked by using the MTK6575 driver :good:
bhargav1991 said:
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YTF
This is the CWM forum.
Has anyone tried tw5 launcher on this ?
Sent from my GT-I9100 using xda premium
bhargav1991 said:
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello bhargav1991, i got some questions:
1. I've buy zp900 but it will arrive next week. In the video you posted there is a guide how to flash the official Zopo z900 latest stock ROM but in this way you get the latest rom + root but no ClockWorkMod Recovery installed ?¿¿
2. My intention as i done with my old..HTC Desire HD is flashing ClockWorkMod Recovery and install the latest Zp 900 stock ROM + ROOT. So following the 1st post and once all steps are done one by one, will I get the same rom that come installed ?¿ but non root ?¿
I need to download the latest ZOPO ROM .zip and then install it from ClockWorkMod and finally i will get the latest ROM + ROOT ¿?
Could you please help me
Thank you so much in advance guys ¡¡
:good:
Hi i have seen so many peoples are searching for swipe halo value 8 tablet. which is a10. i don't have exact firmware but i have clone. i have flashed so many allwinner a10 based roms but no luck. only few roms booted but touch didn't worked. after so much of frustration i have given last chance to ly f1 rom. BINGO it worked. everything was fine with that rom. i have flashed almost every rom that was based on ly f1. i have found few bugs on some roms like Bluetooth,camera are not working and that was not a big problem for me.recently jelly bean 4.1 was posted by seby is working smoothly with no lags. thanks to seby for making great rom.
if you are facing 7 inches screen on 8 inches tablet. you have to pull out the script.bin file using allwinner tools posted in gsmhosting and follow the instructions.
Rooting and flashing
Ramesh006 said:
Hi i have seen so many peoples are searching for swipe halo value 8 tablet. which is a10. i don't have exact firmware but i have clone. i have flashed so many allwinner a10 based roms but no luck. only few roms booted but touch didn't worked. after so much of frustration i have given last chance to ly f1 rom. BINGO it worked. everything was fine with that rom. i have flashed almost every rom that was based on ly f1. i have found few bugs on some roms like Bluetooth,camera are not working and that was not a big problem for me.recently jelly bean 4.1 was posted by seby is working smoothly with no lags. thanks to seby for making great rom.
if you are facing 7 inches screen on 8 inches tablet. you have to pull out the script.bin file using allwinner tools posted in gsmhosting and follow the instructions.
Click to expand...
Click to collapse
for rooting you can use one click root or root.bat file from slatedroid.
for cwm and twrp recovery search for cwm or twrp recovery for ly f1.
for flashing new rom you can use live suit and phonix card method. live suit is best one in my opinion and also search for how to flash firmware using live suit.
rom for swipe halo value 8
sir can you post the modified rom for swipe halo value 8 because i am also facing same problem with my tab i can't understand how to pull out script.bin file using allwinner tools. I will be thanks to you if you will post the modified rom for swipe halo value 8.
Complete instructions more comming soon
Sorry for my delay here is step by step instructions.
WARNING:
I'm not responsible if anything happens to your device
If your device is stuck at boot logo or not turning on then your are good to go from here.
download live suite from https://www.topnotchtablets.com/LivesuiteInstall
NOTE: live suite wont work on windows xp
install using run as administrator for w7 and w8
Download rom from http://www.4shared.com/zip/akeVjHWE/E200_Seby_2203.html
unzip using winrar
for flashing rom using live suite see this video https://www.youtube.com/watch?v=ejHmqVk37sc
it is easy open live suite after installing it will ask for upgrade press no then click on yellow box select unziped rom file now press and hold volume increasing button connect usb cable while holding vol+ then keep pressing power button until you see yes or no warning on screen then release both buttons and press yes again yes and wait until the process completes.
if your tablet is not detected then you need to install android sdk tools kit google it
still no success?
then download usb drivers for android and search for android.ini file open it using notepad. now connect your tablet and go to device manager you will see yellow exclamation mark right click on it select properties on last coloum find usb vid and pid values change the usb and pid values on android.ini file and select update driver select android.ini folder then it will install.
Still no success....
then go for phonix usb pro https://doc-04-40-docs.googleuserco...73294500899099/*/0B3qYFBKKL2hiYWpIbTZ5dDFRdW8
here instructions http://androidxda.com/flash-stock-rom-using-phoenix-usb-pro
roms for flashing using phonix usb pro and live suite
http://www.alluc.com/l/LY-F1-A102-3-4-20120107-rar/hnu5ell
http://www.4shared.com/file/4xKUai6-ce/A088-MID_GSM_2G-M1190_v103-234.html?
http://lctrading.hk/download/LYF1/ fast download
if you want TWRP recovery here http://www.slatedroid.com/topic/63098-twrp-for-ly-f1f8f8as/
For converting 7 inches screen to 8 inches
for this you need allwinner tools download from http://www.techknow.me/forum/index.php?topic=6469.0
also download notepad++
turn on your tablet go to setting and enable usb debugging then connect to pc .
for me it was working on windows xp and not working on w7 and w8.
i will attach the alwinner tool.
i will post detailed instructions about how change screen size within few hours:good:.
Here instructions
If you are using swipe halo value 8 tablet then go last image it will be easier.
on my next update i will give instructions to make your tablet run faster without lag and battery lasts longer
[Q] Bassoon 7" dual sim .zip SDcard recovery rom needed or USB driver for flashtool
Ls,
I'm trying to help a friend who deleted too many files from his Bassoon 7"dual sim tablet.
Now it fails to make calls and keeps saying that: "unfortunately, the system laucher has stopped".
I have no idea what he deleted (after I adviced him to install SU so he could move apps to the SDcard, so i feel responsible)
So im trying to reinstall the entire thing.
Factory reset doesnt help.
On needrom.com I found some jxd p1000 roms that might work(apparently the bassoon 7"is a jxd p1000 clone)
I have found several roms on needrom.com that might apply.
There's only 1 .zip rom that will attempt to install from SDcard. It starts but fails after a while because its the wrong ROM prob. It has android 4.1.1 and the tablet says 4.2.2.
The other roms require the flashtool.
I tried all possible flashtool that were adviced on this, and other, forums.
The problem is that the flashtools dont seem to recognize the device, neither does adb.exe.
I can use sideload but dont have the right .zip file for it. I can also copy it to the sdcard and use; recovery boot and install from SDcard but again, i dont have the right .zip ROM for that.
WIndows recognizes and is able to acess the device as a USB or as a m72_nand_p88 device.
I have installed the MTP-65xx usb drivers. some HTC usb drivers (windows reported the device as a HTC desire at some point) and the ADB usb drivers(windows reports the device as a ADB usb device if connected in recovery mode)
Questions(calls for help );
- Is there a USB driver that I haven't found that will enable me to use the flashtools so I can try the other ROMS from needrom.com
and/or
- Is there a way to convert the .rar ROMS that use the scatterfile to a .zip that i can use in reboot recovery from SDcard or use ADB sideload
and/or
:cyclops: :silly: im going crazy here....
Recap:
- I cant connect to the device with the flashtool
- I do not have the rom in a .zip that I can use in recovery from SDcard :silly:
- I do not know how, or if its possible to, convert the scatterfile/flashtool roms to a format (.zip) that I can use with recovery from SDcard or sideload (the scatterfile .rar roms are about 170Mb the .zips are about 400+ Mb so eitehr they are pre-unpacked-installed...?)
- I seriously have no idea what to do next..
Device:
samsung p1000 look alike clone; it has dual sim, 7 inch display, says bassoon on the back.
android 4.2.2
baseband: MOLY.WR8.W1315.MD.WG.MP.V8
Kernel: 3.4.5 [email protected]#1
Build: ALPS.JB3.MP.V1.12
Custom build V023
Any and all help is much appreciated!
Highest regards,
Mac
MacShrike said:
Ls,
I'm trying to help a friend who deleted too many files from his Bassoon 7"dual sim tablet.
Now it fails to make calls and keeps saying that: "unfortunately, the system laucher has stopped".
I have no idea what he deleted (after I adviced him to install SU so he could move apps to the SDcard, so i feel responsible)
So im trying to reinstall the entire thing.
Factory reset doesnt help.
On needrom.com I found some jxd p1000 roms that might work(apparently the bassoon 7"is a jxd p1000 clone)
I have found several roms on needrom.com that might apply.
There's only 1 .zip rom that will attempt to install from SDcard. It starts but fails after a while because its the wrong ROM prob. It has android 4.1.1 and the tablet says 4.2.2.
The other roms require the flashtool.
I tried all possible flashtool that were adviced on this, and other, forums.
The problem is that the flashtools dont seem to recognize the device, neither does adb.exe.
I can use sideload but dont have the right .zip file for it. I can also copy it to the sdcard and use; recovery boot and install from SDcard but again, i dont have the right .zip ROM for that.
WIndows recognizes and is able to acess the device as a USB or as a m72_nand_p88 device.
I have installed the MTP-65xx usb drivers. some HTC usb drivers (windows reported the device as a HTC desire at some point) and the ADB usb drivers(windows reports the device as a ADB usb device if connected in recovery mode)
Questions(calls for help );
- Is there a USB driver that I haven't found that will enable me to use the flashtools so I can try the other ROMS from needrom.com
and/or
- Is there a way to convert the .rar ROMS that use the scatterfile to a .zip that i can use in reboot recovery from SDcard or use ADB sideload
and/or
:cyclops: :silly: im going crazy here....
Recap:
- I cant connect to the device with the flashtool
- I do not have the rom in a .zip that I can use in recovery from SDcard :silly:
- I do not know how, or if its possible to, convert the scatterfile/flashtool roms to a format (.zip) that I can use with recovery from SDcard or sideload (the scatterfile .rar roms are about 170Mb the .zips are about 400+ Mb so eitehr they are pre-unpacked-installed...?)
- I seriously have no idea what to do next..
Device:
samsung p1000 look alike clone; it has dual sim, 7 inch display, says bassoon on the back.
android 4.2.2
baseband: MOLY.WR8.W1315.MD.WG.MP.V8
Kernel: 3.4.5 [email protected]#1
Build: ALPS.JB3.MP.V1.12
Custom build V023
Any and all help is much appreciated!
Highest regards,
Mac
Click to expand...
Click to collapse
Greetings Mac,
I have a similar problem with same tablet but I was able to fine the direct download site for Bassoon. It's in Chinese but you can figure it out. Scroll to the model and version (version # under 2nd battery i.e. 061) as well as the , click on link and on the page there is a down arrow and horizontal bracket on button on top to download. "SP_Flash_Tool". I am currently downloading the rom for my device but will post results.
Here's the link: http://pan.baidu.com/share/home?uk=2285182452&view=share#category/type=0
Good Luck!
bassoon stock roms with flash tool
MacShrike said:
Ls,
I'm trying to help a friend who deleted too many files from his Bassoon 7"dual sim tablet.
Now it fails to make calls and keeps saying that: "unfortunately, the system laucher has stopped".
I have no idea what he deleted (after I adviced him to install SU so he could move apps to the SDcard, so i feel responsible)
So im trying to reinstall the entire thing.
Factory reset doesnt help.
On needrom.com I found some jxd p1000 roms that might work(apparently the bassoon 7"is a jxd p1000 clone)
I have found several roms on needrom.com that might apply.
There's only 1 .zip rom that will attempt to install from SDcard. It starts but fails after a while because its the wrong ROM prob. It has android 4.1.1 and the tablet says 4.2.2.
The other roms require the flashtool.
I tried all possible flashtool that were adviced on this, and other, forums.
The problem is that the flashtools dont seem to recognize the device, neither does adb.exe.
I can use sideload but dont have the right .zip file for it. I can also copy it to the sdcard and use; recovery boot and install from SDcard but again, i dont have the right .zip ROM for that.
WIndows recognizes and is able to acess the device as a USB or as a m72_nand_p88 device.
I have installed the MTP-65xx usb drivers. some HTC usb drivers (windows reported the device as a HTC desire at some point) and the ADB usb drivers(windows reports the device as a ADB usb device if connected in recovery mode)
Questions(calls for help );
- Is there a USB driver that I haven't found that will enable me to use the flashtools so I can try the other ROMS from needrom.com
and/or
- Is there a way to convert the .rar ROMS that use the scatterfile to a .zip that i can use in reboot recovery from SDcard or use ADB sideload
and/or
:cyclops: :silly: im going crazy here....
Recap:
- I cant connect to the device with the flashtool
- I do not have the rom in a .zip that I can use in recovery from SDcard :silly:
- I do not know how, or if its possible to, convert the scatterfile/flashtool roms to a format (.zip) that I can use with recovery from SDcard or sideload (the scatterfile .rar roms are about 170Mb the .zips are about 400+ Mb so eitehr they are pre-unpacked-installed...?)
- I seriously have no idea what to do next..
Device:
samsung p1000 look alike clone; it has dual sim, 7 inch display, says bassoon on the back.
android 4.2.2
baseband: MOLY.WR8.W1315.MD.WG.MP.V8
Kernel: 3.4.5 [email protected]#1
Build: ALPS.JB3.MP.V1.12
Custom build V023
Any and all help is much appreciated!
Highest regards,
Mac
Click to expand...
Click to collapse
this is the link where you can download the stock rom for basoon phablets https://androidmtk.com/download-bassoon-stock-rom-models
they have some bugs like wifi nvram warning, no working gps, gravity, and compas
and one very very annooing chinese app that constandly sends you app announcements that you can install if you delete it than youre contacts and phone functions will not work
maybe you can fix those things
greetings flappie311
CM443 ROM: First Tweaked SPFT version 1.1 by CMahendra
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features in v1.0:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Whats new in v1.1
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
Whats wrong/missing?
--- Off-screen gestures is intentionally removed for better battery backup, because it is main culprit in faster-drain of battery. It will not be added in my ROM now or in future. But you can try any Free App available on Google Play Store for the same. Kindly do not send request for adding it. I don't want freaking panic reports for battery drains.
Important: Screen Gestures are still working perfectly. For GOD's sake read and understand that Offscreen gestures and Screen Gestures are different things. Those who will again ask it will be recognized as nothing but n00bs.
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any. Restart PC after installing.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
10) ABOVE IS MAIN ROM. Flash Recovery Flashable Zip of Update Version 1.1. Just flash from Recovery and reboot. No wipe required.
Done. Enjoy Press thanks if you liked my work.
(UPDATE) Version 1.1 Update (*Flash this from TWRP Recovery Mode over Full Rom 1.0)
Download Link: http://d-h.st/ATiE (2 MB small update)
**Just flash from recovery without wiping anything and reboot.
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
How to flash?
--- Copy file in SDCARD
--- Switch off phone and start in TWRP recovery mode. (Keep Pressing VolumeUP and Power Button, until TWRP starts)
--- Install this update Zip by selecting "Install" option
--- Just reboot to system (Do not wipe anything or do not make factory reset)
ChangeLog:
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
================================================
(FULL ROM) Main SPFT Version 1.0 Package Download
Server 1) Dev-Host (FILE SPLIT IN TWO PARTS. DOWNLOD BOTH LINKS & Click on ZIP file to extract)
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
------------Split Zip Part 1 : http://d-h.st/n8Q (172MB)
------------Split Zip Part 2 : http://d-h.st/Znt (400MB)
*Plesae do not mirror links without permission. It helps us to keep/monitor download counts.
================================================
Patches and Addon (Files and Flashables)
1) BASEBAND Update For Auxus Note by CMahendra (For all Android versions)
http://d-h.st/uWV
---- For strong Mobile network and fast Network Search (APN)
2) Sensor Calibration Test Patch for 4.4.3 Rom
http://forum.xda-developers.com/attachment.php?attachmentid=2952230
---- For solution on FC Error when you click Loudspeaker test in hidden menu *#*#33#*#*
Frequently Asked Questions
Question 1) My phone is not rooted. Can I go with this 4.4.3?
Answer: Yes of course. This can be directly flashed on Unrooted phones with SPFT method. So with this flash you automatically get TWRP 2.7.1.0 Recovery and Fully Rooted ROM! SPFT Unbricks Phone. UNBRICK MEANS, when phone is dead or everything is messed or bootloops or partition table damaged or blank screen or corrupted rom, etc. etc. Just flash with this method and you are back on FRESH 4.4.3 ROM. Flashing Rom from recovery may always get issues if method is wrong or tables not compatible or any wierd issues but Flashing with SPFT means resetting of partition tables and flashing all content in every partition like A COMPANY gives you.
Question 2) My PC/Laptop is not detecting my Phone while flashing. What to do?
Answer: Above drivers worked for me flawlessly. Phone was detected in first try but there are members who reported that they did it 2/3 times and then phone was detected. Well it is weird but you can try installing driver and rebooting pc and repeat it 2/3 times. When it installs the flashing tool will show COM3 serial port connected message at bottom right corner as shown in this image.
If everything fails, try this new USB2Serial Driver which I have recently found from iBerry's official rom package and it should help. DOWNLOAD USB2Serial Driver
Question 3) SPFT Flashing fails with message "PMT changed for the rom it must be downloaded" What to do?
Answer: That error means that the partition table present in the phone is different from the partition table that the rom ur trying to flash to the phone needs. There is drop down with few flashing modes. "Download only" mode doesn't reformat the phone's partitions to what the new rom needs, so you have to choose the "Firmware Upgrade" mode option, that will apply the new formatting table following the settings of the rom you are trying to flash.
Downloading sir. Thank you.
A small clarification please sir.
What is the baseband version in this rom. Is it P6 or P5.
Cause tried mlais ROM from need rom which has baseband of P5.
Great!..
Thanks for 4.4.3 hoping for 4.4.4 and also SAMSUNG GALAXY ROM'S
HOPW YOU DO IT FOR US!
Great work
4.4.3 with SPFT!! That's really FANTASTIC, ha ha ha, now we don't need of separate rooting, custom recovery methods, that's really great work boss, thanks a lot for the ROM. :good::good::good:
baskye said:
Downloading sir. Thank you.
A small clarification please sir.
What is the baseband version in this rom. Is it P6 or P5.
Cause tried mlais ROM from need rom which has baseband of P5.
Click to expand...
Click to collapse
This SPFT version flashes P5 but there is P6 Baseband updates given in Second post. Flash it from Recovery mode..
kiranhdg said:
Thanks for 4.4.3 hoping for 4.4.4 and also SAMSUNG GALAXY ROM'S
HOPW YOU DO IT FOR US!
Click to expand...
Click to collapse
Working on 4.4.4 now. It will come for sure before iBerry even can think of :laugh:
Android update was major task for me. I can not even think of custom roms when the features are not working fine in stock rom. So first mission is perfect camera , battery etc. Just check camera is improved like hell in 4.4.3. Sure some custom roms will follow....
[email protected] said:
4.4.3 with SPFT!! That's really FANTASTIC, ha ha ha, now we don't need of separate rooting, custom recovery methods, that's really great work boss, thanks a lot for the ROM. :good::good::good:
Click to expand...
Click to collapse
Thanks pals
Any body installed this Rom...What's the battery backup?
Great job Mahendra! Thank u Thank u Thank u!!!!!!
Great job Mahendra! Thank u Thank u Thank u!!!!!! The RED patch in camera is completely removed
Not only the camera, Battery , the speaker volume improved. Its Rooted. Has ES explorer preinstalled.
Proximity sensor doesn't seem to work. Please check. I dont have any issue with that as I'm using the phone with flip cover and hence no chance of my ear touching the screen. Have you purposely done away with that to improve battery?
cmahendra said:
[UNBRICK 4.4.3] First ever SPFT version of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
Features:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
Done. Enjoy Press thanks if you liked my work.
Click to expand...
Click to collapse
Can you please provide Xperia Z keyboard for this version.
cmahendra said:
[UNBRICK 4.4.3] First ever SPFT version of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
Features:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
Done. Enjoy Press thanks if you liked my work.
Click to expand...
Click to collapse
Impressive !
question about attached zip files
cmahendra said:
Main SPFT Package Download Links
Server 1) Dev-Host (FILE SPLIT IN TWO PARTS. DOWNLOD BOTH LINKS)
------------Split Zip Part 1 : http://d-h.st/n8Q
------------Split Zip Part 2 : http://d-h.st/Znt
Patches and Addon (Files and Flashables)
1) BASEBAND Update For Auxus Note by CMahendra (For all Android versions)
http://d-h.st/uWV
---- For strong Mobile network and fast Network Search (APN)
Click to expand...
Click to collapse
Just for my information, i need to open only the main zip file and extract it, or i need to do anything else ?
jcpprince said:
Great job Mahendra! Thank u Thank u Thank u!!!!!! The RED patch in camera is completely removed
Not only the camera, Battery , the speaker volume improved. Its Rooted. Has ES explorer preinstalled.
Proximity sensor doesn't seem to work. Please check. I dont have any issue with that as I'm using the phone with flip cover and hence no chance of my ear touching the screen. Have you purposely done away with that to improve battery?
Click to expand...
Click to collapse
No! Proximity Sensor need to be recalibrated from secret manu *#*#33#*#*
Nothing done for battery. Will work on proximity to make it like stock by checking codes. Please wait.
Thanks for flashing this rom and glad you liked the camera and battery results.
IMP: Please edit your post and remove whole quote of opening post.
baskye said:
Can you please provide Xperia Z keyboard for this version.
Click to expand...
Click to collapse
This was based on 4.4.3 stock so I did not mixed Xperia Z keyboard. Wait for next updates. I will try to replace keyboard but after some time. Hope you will wait with patience because I get involved in many models at the same time. You may remind me if I forget. Thanks
ashishgupta1973 said:
Impressive !
Click to expand...
Click to collapse
Thanks a lot. Glad you liked it.
ashishgupta1973 said:
Just for my information, i need to open only the main zip file and extract it, or i need to do anything else ?
Click to expand...
Click to collapse
IMP: Please edit your post and remove whole quote of opening post.
Download both files and keep together in a folder and if you have WinZip / WinRAR / WinJAR, then just doublelick on ZIP file and extract as usual.
(UPDATE) Version 1.1 Update
Download Link: http://d-h.st/ATiE
**Just flash from recovery without wiping anything and reboot.
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
ChangeLog:
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
Sir,
Is the patches of "Base Band" and "Sensor Calibration" are optional or compulsory.
Thanks you very much for the Great ROM.
:good::good::good:
ThankU Mahendra Sir… Today I install 4.4.3. It's super.
I want some more options could you please consider my options
1.Call connect vibrating is ther in your Rom but call end vibrating not there. Please add that option
2.battery backup is k..but please optimizing better battery backup.. In using of 2g/3g net battery drain 1m/1% discharging.. I faced this problem in 4.4.2. In your rom also same.. In sleeping time(screen off) battery not discharging its awesome.
3.gps is not working in travel time not connected in gps satellite.. In my net connection is h+ but not connected in speed meter..
Could you please consider my problem thanks for this great Rom
Need help on 2 things
Dear Mahendra,
I have posted requests for help a couple of times. Request you to please help me on beneath two items -
- Post flashing the 4.4.3 rom, am unable to find the option of offscreen gestures.
- I am unable to find the option to save fingerprints. After scanning the fingerprint, there is a box on screen that turns green, but there is no option to add or save the print.
- Also, as I just realized today, Bluetooth does not switch on. is there a bug in the rom?
unable to extract zip files
hi, first of all thanks for making ROM for this phone, well after downloading files i was unable to extract them, i dont know whether i bcame dumb :silly: or problem with zip file. i downloaded files 4 times & still i was unable to extract them ! plz correct me where i was :silly:
Thanks
try deleting the space before the extension (.z01) and try extracting from the other zip file
marpudi said:
hi, first of all thanks for making ROM for this phone, well after downloading files i was unable to extract them, i dont know whether i bcame dumb :silly: or problem with zip file. i downloaded files 4 times & still i was unable to extract them ! plz correct me where i was :silly:
Thanks
Click to expand...
Click to collapse
Excellent
cmahendra said:
First ever SPFT version 1.1 of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
Features in v1.0:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Whats new in v1.1
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any. Restart PC after installing.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
10) ABOVE IS MAIN ROM. Flash Recovery Flashable Zip of Update Version 1.1. Just flash from Recovery and reboot. No wipe required.
Done. Enjoy Press thanks if you liked my work.
Click to expand...
Click to collapse
Hello,
Excellent work, but why you changed resolution !!
Please work on it.
Will post you about battery lifetime once used for 2-3 days