I unlocked the bootloader install TWRP , then into recovery I wiped all data , but can't install the ROM I want to install.
I tried to use the toolkit to fix but somehow the bootloader was relocked again, I can't unlocked or flash any recovery , my phone just stuck on the fastboot with no OS on it.
Would not let me flash anything as it's locked.
Tried fastboot boot ... no lucky.
Any fix?
jasonnew said:
I unlocked the bootloader install TWRP , then into recovery I wiped all data , but can't install the ROM I want to install.
I tried to use the toolkit to fix but somehow the bootloader was relocked again, I can't unlocked or flash any recovery , my phone just stuck on the fastboot with no OS on it.
Would not let me flash anything as it's locked.
Tried fastboot boot ... no lucky.
Any fix?
Click to expand...
Click to collapse
Download the fastboot image from the link below.
http://builds.cyngn.com/factory/bacon/cm-11.0-XNPH38R-bacon-signed-fastboot.zip
Code:
"fastboot flash modem NON-HLOS.bin"
"fastboot flash sbl1 sbl1.mbn"
"fastboot flash dbi sdi.mbn"
"fastboot flash aboot emmc_appsboot.mbn"
"fastboot flash rpm rpm.mbn"
"fastboot flash tz tz.mbn"
"fastboot flash LOGO logo.bin"
"fastboot flash boot boot.img"
"fastboot flash cache cache.img"
"fastboot flash recovery recovery.img"
"fastboot flash system system.img"
"fastboot flash userdata userdata.img" (or userdata_64g.img for 64G version)
"fastboot oem lock"
"fastboot reboot"
Skip the fasboot oem lock if you do not want to relock the bootloader.
Stop using toolkit
Toolkit is for noobs
Download fastboot drivers
Put your phone in fastboot
Then in fastboot prompt > Fastboot oem unlock
Then flash the rom by that command
"fastboot flash modem NON-HLOS.bin"
"fastboot flash sbl1 sbl1.mbn"
"fastboot flash dbi sdi.mbn"
"fastboot flash aboot emmc_appsboot.mbn"
"fastboot flash rpm rpm.mbn"
"fastboot flash tz tz.mbn"
"fastboot flash LOGO logo.bin"
"fastboot flash boot boot.img"
"fastboot flash cache cache.img"
"fastboot flash recovery recovery.img"
"fastboot flash system system.img"
"fastboot flash userdata userdata.img" (or userdata_64g.img for 64G version)
"fastboot oem lock"
"fastboot reboot"
Remove ('')
I found the fix already thru opo forum by download ing the color OS fix tool which Can flash back to color OS
Thanks very much for all replies above.
jasonnew said:
I found the fix already thru opo forum by download ing the color OS fix tool which Can flash back to color OS
Click to expand...
Click to collapse
Can you give me a link to it because I'm in a similar situation?
I formatted my phone bymistake now it has no os installed. i am on twrp and its 54gb free memory. what should i do
tried to use the toolkit to fix but somehow the bootloader was relocked again, I can't unlocked or flash any recovery , my phone just stuck on the fastboot with no OS on it
And not installing the driver only showing driver "Microsoft device association root enumerator". So plz hlp me how to install my opo driver
Welcome you all in this simple guide fro installing TWRP or Team Win recovery for Xolo Black.
How to Install TWRP In Xolo Black
1).First unlock your Boot Loader (Guide Here)
2).Connect your phone to PC and open the terminal window under fastboot package
type adb reboot bootloader. Your device will reboot into fastboot mode. to check, device is connected properly type fastboot devices.
3).Download recovery image and move it to fastboot folder.
4).Now execute fastboot boot recovery_twrpblack.img (this won't flash recovery) and the device will temporarily boot into recovery mode.
5).If you want the recovery image to be flashed to your device the command must be fastboot flash recovery recovery_twrpblack.img
Download:- TWRP for Xolo Black
How to reboot into recovery Mode in Xolo Black:-
>>>>Switch off your phone and then press volume (up+down) + power key to boot in to TWRP recovery.
Just to clear up things: This guide is targeted for Xiaomi Redmi 4 Prime/Pro version and should successfully work fine. and Make Sure the Device has Unlock Bootloader, otherwise you Brick the Device. the Unlocking method has many Posts.
Unlocking Tutorial of Redmi 4 Prime
1-Download Xiaomi Mi Flash ToolMiFlash Tool For ADB Drivers,
2-Download Minimal ADB Tool Minimal ADB Fastboot Tool
3-Download TWRP Recovery TWRP Recovery.zip
4-Extract the TWRP.zip into the Minimal ADB Fastboot Directory i-e
HTML:
C:\Program Files (x86)\Minimal ADB and Fastboot\twrp.img
5-Power Off the Device and then Press and Hold the Volume Down Button and Power On the Device Until the Fastboot Logo appear.
6-The Open Minimal FastBoot Application and Type without Quotes.
"Fastboot Devices" it will show the connect Devices ID.
Fastboot Oem Device-info. It will show the Device unlock Status.
"Fastboot Flash Recovery twrp.img" Flashing the Recovery.
"Fastboot boot twrp.img" To boot in TWRP.
Select Wipe and restore factory Setting from the Recovery options.
Install and then Select Zip in the recovery From the Storage.
Below is the Video Tutorial of the Above Steps
Dont forget to Press THANKS button If this post helped you
AIO GUIDE TECNO KD7
1. Bootloader Unlocking
1. Download & install the ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2. TWRP [unoficial]
https://forum.xda-developers.com/t/twrp-recovery-for-tecno-kd7.4378493/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link: Orange disabler.zip
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-v21.0.zip
3.1. Unroot
1.boot into recovery
2. Flash magisk unistaller .zip
link:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-uninstaller-20201003.zip
5.Stock Firmware Files
Stock boot ,stock recovery & Full Firmware are added
To Flash full firmware
Extract zip & run flash.bat
Link: TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404-fastboot flash full rom.zip
6. Gsi rom / Custom rom Installation guide:
https://forum.xda-developers.com/t/custom-rom-for-tecno-phone-dynamic-partition.4379341/
vendor : ( 3 sim problem guide )
TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404
7. Phone Hard Brick fix
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
7.1. Flash file:
Link :
TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Tecno kd7 full guide
https://forum.xda-developers.com/t/...r-unlocking-root-twrp-stock-firmware.4345557/
What do you mean by boot into recovery? Going fastboot mode? And then writing fastboot flash recovery magisk.zip( for step 3(root)) ?
Also should have the updatest kd7 before rooting?
Thanks in advance for your hard work.
Tanjin01: Thanks
Fast time twrp recovery install: (any bulid version)
[command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option->Format Data -> yes Format.
Next, Reboot option -> recovery click Wait reboot recovery and flash magisk.zip
Any time root and unroot:
2.going to recovery
Open recovery and install magisk zip. /Magisk uninstall flash
Parvej789 said:
Tanjin01: Thanks
Fast time twrp recovery install: (any bulid version)
1.Fastboot flash recovery .
Fastboot reboot recovery -
Open recovery -wipe format data-yes.
reboot to recovery
and install magisk zip.
Any time root and unroot:
2.going to recovery
Open recovery and install magisk zip. /Magisk uninstall
Click to expand...
Click to collapse
Thank a bunch for consist help with my nobby question(s)!
Correct me if i am wrong before i procced,
Fire up pc, open terminal/cmd and writing the following one after another
[Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
[command]
Now i boot into twrp recovery and from there "wipe data". Then "advanced wipe" with delvic cache.
Next, again, twrp recovery and flash magisk.zip
Right?
Tanzin01
[Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now i boot into twrp recovery and from there "wipe ". Then "Format Data" with yes Format.
Next, Reboot to recovery .again, twrp recovery and flash magisk.zip
Right?
Thanks man. Have a nice day&life
hey man, all went well till format. in format i saw some error, eg failed to mount /data(something like this). Any idaea why i got this?
[i got a success msg though]]
also can i access twrp recovery mode via volume and power button?(i tried volume up+power button but got adnroid image with "No command".)
Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option ->Format Data -> yes Format .
Next,
Reboot options -> recovery click Wait reboot to recovery and magisk.zip flash
Parvej789 said:
Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now i boot into twrp recovery and from there "wipe ". Then "Format Data" with yes Format.
Next,
Reboot options to recovery .again, twrp recovery and flash magisk.zip
Right?
Click to expand...
Click to collapse
All the commands worked smoothly but when again tried to go twrp recovery for rooting, I can't seem to find twrp. I got no command with Android pic and after few seconds default device recovery option. From where I can navigate to fastboot, recovery, wipe and etc.
"
Next,
Reboot options to recovery .again, tw
Parvej789 said:
Next,
Reboot options to recovery .again, twrp recovery and flash magisk.zip
Right?
Click to expand...
Click to collapse
Not sure what you mean by this. But tried
[Command]
adb reboot bootloader
fastboot reboot recovery
[Command]
Which took me to deafult recovery, no Twrp this time.
However I spent some time on xda and found this Command "fastboot boot twrp.img". Will try tomorrow again, will let you know if it worked! Man I'm probably bothering you!
Tanzin01 said:
"
Next,
Reboot options to recovery .again, tw
Not sure what you mean by this. But tried
[Command]
adb reboot bootloader
fastboot reboot recovery
[Command]
Which took me to deafult recovery, no Twrp this time.
However I spent some time on xda and found this Command "fastboot boot twrp.img". Will try tomorrow again, will let you know if it worked! Man I'm probably bothering you!
Click to expand...
Click to collapse
[command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option->Format Data -> yes Format and back home menu
Next, Reboot option -> recovery click Wait reboot recovery and flash magisk.zip
Unorganized posts! Its xda's fault. Your edited post wasn't shown to me until my last post was posted!
Thanks man. This time I got it. I wrongly rebooted after "format data". I will reflash the twrp file again tomorrow.
Hey, i got myself in trouble again! Everything was working fine till i clicked on "Erase data" from settings. Now i cant boot into sytem, always booting into twrp.Any help?
Should i try flashing android 11, the one you provided here?
Tanzin01 said:
Hey, i got myself in trouble again! Everything was working fine till i clicked on "Erase data" from settings. Now i cant boot into sytem, always booting into twrp.Any help?
Should i try flashing android 11, the one you provided here?
Click to expand...
Click to collapse
Stock recovery.img flash and reboot
To make sure, i am donig as you described,
download stock firmware and get recovery.img.
now flash it: fastboot flash recovery recovery.img
Now reboot, right?
Btw cant i just flash andoid 11 altogether? (and thanks for your constant help
Tanzin01 said:
To make sure, i am donig as you described,
download stock firmware and get recovery.img.
now flash it: fastboot flash recovery recovery.img
Now reboot, right?
Btw cant i just flash andoid 11 altogether? (and thanks for your constant help :fashfashfashfash)
Click to expand...
Click to collapse
Yes
Or
Full flash
KD7-H6211FQRSTU-Q-GL-210520V392.zip
drive.google.com
how to do full flash?
[command]
fastboot flash system FullFlashfirmware.zip
[command]
or
sideload the zip file and then swipe install via twrp?
No .
PC to mobile(fastboot flash)
Now connect device to PC
Unzip flash file PC
Folder open
Click flash.bat
CMD open:
1.Do you want to Reboot device into fastboot [Y/N]=y type enter
2.wipe user data [Y/N]=y type enter
Then flash started
FLASHING success
Reboot to phone on
sadly im not on windows. Anyway thnx. i will try and see flashing recovery. Will let you know the result.
Stock recovery.img flash and reboot options->system click.
Reboot to phone on
Parvej789 said:
Stock recovery.img flash and reboot options->system click.
Reboot to phone on
Click to expand...
Click to collapse
got error
```
fastboot flash recovery recovery.img
Sending 'recovery' (39936 KB)
FAILED (Write to device failed (No such device))
fastboot: error: Command failed
``
tried changing cable but no change.
Oky so i had a hunch, and it was correct. i mounted system and didnt get that error.
Thanks buddy. Took me few tries and combination. but now im back with my device. And as guessed, twrp was/is the culprit. It was locking the system or something like this, perhaps a glich? anyway had to mount system and already wrote the command on terminal, so as soon as phone screen turns on, i get to send the data from pc to phone before phone starts doing many of its stuff.
Wipe option->format data -yes
Reboot option-> recovery and Twrp open
1.boot.img flash
2.super.img flash
3.recovery.img flash
Than reboot
Tanzin01 said:
Thanks buddy. Took me few tries and combination. but now im back with my device. And as guessed, twrp was/is the culprit. It was locking the system or something like this, perhaps a glich? anyway had to mount system and already wrote the command on terminal, so as soon as phone screen turns on, i get to send the data from pc to phone before phone starts doing many of its stuff.
Click to expand...
Click to collapse
Build version correct
Your build version
I got Motorola Edge S from China, and plan to:
1. Unlock (Succeeded !)
2a. fastboot flash boot twrp-3.5.2_11.0-2-nio.img
fastboot flash boot_b twrp-3.5.2_11.0-2-nio.img
SD card cannot work properly, as well as Adb sideload, so Official LOS.zip cannot be flashed,
OR
2b. fastboot flash boot lineage-19.1-20220604-recovery-nio.img
fastboot flash boot_b lineage-19.1-20220604-recovery-nio.img
Stucked on the Boot-up screen with Logo before Recovery mode.
3. flash Stock EU rom
(to achieve more international firmware, since I don't find independent firmware.zip)
4. flash LOS rom
N.B. [data] partition had been cleared, and I should haven't cleared [system] partition, but I cannot boot back to stock rom after Step 2, and I believe the stock rom has been removed for any accident.
Please help
Might be a long shot here, but I bricked G100 when trying to flash to both slots. Use the Motorola device recovery tool to bring it back to stock and flash only ONE slot (the active one) with your rom. There's installation scripts on this forum that do exactly this for you.
twelfth said:
Might be a long shot here, but I bricked G100 when trying to flash to both slots. Use the Motorola device recovery tool to bring it back to stock and flash only ONE slot (the active one) with your rom. There's installation scripts on this forum that do exactly this for you.
Click to expand...
Click to collapse
Initially I just flash one slot. Then I read that inconsistency between 2 slots can cause problem, so I have flash 2nd slot also, by copy-partitions-20210323_1922.zip or by "fastboot flash boot_b ...".
Now, I can also recovery and boot back to stock rom, by flash boot.img extracted from stock rom.zip with the same version as mine.
So the KEY problem is:
Under TWRP recovery loader, with ADB sideload turned on, the PC seems cannot connect & send below crucial command to Android:
$ fastboot flash boot lineage-19.1-20220604-recovery-nio.img
N.B. I have already used USB driver from Motorola, so ADB commands can run without problem, except ADB Sideload mode. Also, I have tried using USB 2.0 hub port with 2.0 cable (4-pins) as well.
TWRP for nio is not stable (yet). Use the instructions for lineageos official.
patwwh said:
I got Motorola Edge S from China, and plan to:
1. Unlock (Succeeded !)
2a. fastboot flash boot twrp-3.5.2_11.0-2-nio.img
fastboot flash boot_b twrp-3.5.2_11.0-2-nio.img
SD card cannot work properly, as well as Adb sideload, so Official LOS.zip cannot be flashed,
OR
2b. fastboot flash boot lineage-19.1-20220604-recovery-nio.img
fastboot flash boot_b lineage-19.1-20220604-recovery-nio.img
Stucked on the Boot-up screen with Logo before Recovery mode.
3. flash Stock EU rom
(to achieve more international firmware, since I don't find independent firmware.zip)
4. flash LOS rom
N.B. [data] partition had been cleared, and I should haven't cleared [system] partition, but I cannot boot back to stock rom after Step 2, and I believe the stock rom has been removed for any accident.
Please help
Click to expand...
Click to collapse
Late here but on 2a step, you can actually copy the ROM zip to internal storage since windows can detect your phone as storage device when it is in TWRP recovery.
https://wiki.lineageos.org/devices/nio/install is telling everything you need to know.
Though:
NEW:
Code:
fastboot devices
fastboot --set-active=a
// Update firmware
// Files taken from https://mirrors.lolinet.com/firmware/motorola/nio/official/RETEU/
fastboot flash modem_a NON-HLOS.bin
fastboot flash modem_b NON-HLOS.bin
fastboot erase mdmddr
fastboot flash fsg_a fsg.mbn
fastboot flash fsg_b fsg.mbn
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
fastboot flash bluetooth_a BTFM.bin
fastboot flash bluetooth_b BTFM.bin
fastboot erase carrier
fastboot erase ddr
fastboot reboot bootloader
fastboot devices
fastboot --set-active=a
// First setup
// Files taken from https://mirror.math.princeton.edu/pub/lineageos/full/nio/
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash vendor_boot_a vendor_boot.img
fastboot flash vendor_boot_b vendor_boot.img
fastboot reboot bootloader
fastboot devices
fastboot --set-active=a
// Install recovery
// Files taken from https://download.lineageos.org/nio
fastboot flash boot <recovery_filename>.img
for example:
fastboot flash boot_a <recovery.img>
fastboot flash boot_b <recovery.img>
fastboot reboot recovery
// Be sure all firmware is consistant
// Files taken from https://mirrorbits.lineageos.org/tools/copy-partitions-20220613-signed.zip
adb sideload copy-partitions-20220613-signed.zip
fastboot reboot recovery
FRESH INSTALL OF LINEAGE
Code:
Reboot into recovery
CHECK WHICH IS THE ACTIVE PARTITION, FIRST TIME A
Goto “Factory reset”
Goto “Format data/factory reset”
Goto “Format data”
Goto “Apply Update”
Goto “Apply from adb”
adb sideload <lineageos.zip>
Goto “Advanced”
Goto “Reboot to recovery” (now active partition is changed to the updated one)
CHECK WHICH IS THE ACTIVE PARTITION, FIRST TIME SHOULD BE B!!
Reboot to system and setup...
(This is how I do it...)
(On updates, active partition is switching on reboot after you have done a flash of lineageos.zip file)
(Forget TWRP for this device as it is not finished and several bugs are there. Just use Lineage OS)
TWRP only works on Android 11, above that nothing will work and it will be very buggy