TL: DR: Screen sometimes is totally black, but otherwise the screen seems to work fine. Sometimes the phone acts completely normal. Sometimes the phone acts completely normal, but the screen is tinted green, but only after it's booted up. I can access download screen with no issue, most of the time I can get into recovery with out a problem, but not always.
I'm brand new to the GS3, but I purchased it last week on ebay (described as fully functional) since my other phone has been giving me troubles. I received it last Thursday (5/15/14), and it seemed to work fine. I have not been able to activate it yet since I did not have 4G sim card, so I've just been playing with it around the house to make sure it works until I get my 4G card from Verizon in the mail.
So Saturday comes along, and I notice that the screen is all black, but makes the usual sounds when you touch the screen. I pull the battery, and boot it back up. The Samsung logo would come up, but none of the boot animation. Nothing after the Samsung logo. It seems that if I push the power button, the phone seems to be functional, but nothing comes up on the screen. Sometimes if I push the power button a bunch of times, I can get the screen to come on. The screen looked normal, and everything worked fine, until I hit the power button. Back to the black screen. I booted into recovery, cleared the cache and did a factory wipe, and it seemed to be completely normal for a while.
I've noticed that sometimes phone acts completely normal (proper colors, screen turns off and on as it should), sometimes it works normally but the screen is tinted green (power button turns off and on the screen as it should), and sometimes, the screen is totally black, but the touch functions work normally.
Since the screen always works at boot (I can see the Samsung logo clearly and with no color distortion, but sometimes the rest of the boot animation is gone, even though I hear the boot music), and there is also no color distortion in recovery or download mode, am I likely looking at a software issue?
It is not rooted, and completely stock on 4.1.2. EDIT:Baseband is VRBMF1.
I have tried to make my problem as clear as possible, but I will clarify anything if necessary.
Thanks.
I downgraded to VRBMB1 with ODIN, and I still seem to be having the same issue (screen goes black, won't come back on), although the green tint problem hasn't happened yet. As long as I leave the screen on, it works fine. I'm thinking that this might be a problem with the power button, although I don't understand why it would allow me into download mode with no issues, but trouble doing much of anything else. I'm probably going to be sending it back for a refund, but if anyone has any suggestions, I'm more than willing to listen. Thanks.
Related
So i am at home playing with my Xoom fine before going to work. I place it in it's padded bag and get in my car to go to work. No bumps, no bangs, no drops. I get into work and pull it out to play with it some more and the screen is dead, or so it seems. Backlight not coming on. So i think it is dead and force a soft reboot, still can see nothing, i try a few more times, finally i notice if i hold it in just the right light i can see the screen fine, it was rebooting, but the backlight wasn't showing.
I let it finish booting and if i hold the screen in just he right light i can see the live wallpaper moving, so i know the screen is on and working, i can click icons and everything, but the backlight still won't light up. Had to stumble my way to brightness in settings, really hard to do when you can barely make out the screen. Set it to auto, nothing, set it to fully bright, stil nothing.
Is this a hardware issue? Or could i have some random software glitch? I rebooted three times now, hoping it would change. Nope. Stock software, no root, nothing. Had it for almost a month now. This sucks.
Hey all i am really new to this and run into a major problem. I rooted my phone with superoneclick and installed a ROM from SGS tools for my samsung captivate. When it would enter into the recovery screen it would not show the usual options but instead a screen of what looked like a pixelated mess. Once the phone started i went to restore to factory settings and now when the phone starts up I see the AT&T logo then it goes to a black screen where it stays there forever. Did i manage to screw up my phone? any help is greatly appreciated.
ok, I finally turned the phone off and left it overnight. The phone does start and work like it should. The only thing is that once you try to go to the recovery mode and the phone does its thing, I am brought to a screen that is half snowy (like the television when you dont get a certain channel) and the other half with lines of red, green, and blue. From here I cannot tell what is going on when I use the volume key to go up or down. Then with a double click of the power button the phone just restarts normally.
Here's the problem: when the TF boots into the OS, the screen cuts off after the boot animation. I can see it fine in CWM also.
I was running the Prime ROM with HC 3.2. This ROM has worked quite well for months. Earlier this week, I was going to boot it up and use it while riding in the car. The screen was fine during the boot animation, but as soon as it hit the OS, it went blank.
I hit the power button and could tell that was working, because I could see a quick flash of backlight when I pressed it. But no screen display.
So I saw that Revolution 3.0 was released, so I installed it. The screen worked fine through CWM and everything was fine up until I installed the OS and went through the initial bootup and setup process in ICS.
When I turned it off and back on, it wouldn't come on. So I don't really know where to start. I assume this has something to do with the backlight sensor, and I have looked around here for some references, but nothing comes up.
Is there a way to disable the backlight sensor completely to test my idea? Anyone have any other suggestions? Thanks all.
My TF was serviced by ASUS back in the summer after I dropped and bent the bezel. They put a new power button daughterboard and bezel on it.
I just wiped the tablet with CWM and it let me reboot and go through the ICS setup steps again.
Screen went dark the very instant I touched the brightness slider control...
I've come up with a problem that has perplexed me on my Galaxy J700T. I've looked everywhere for solutions, but none have worked.
The phone's screen will go dark after it boots, but will show the lock screen for a split second. The screen will sometimes flicker back to life for a moment, but then go back out. This can happen a few times. Sometimes it will go back to the same screen, but sometimes it will show the lock screen. Sometimes it will show the lock screen on a flicker, but then go back to whatever normal screen or app it was on before, when I hadn't unlocked it. This only happens when it was on that screen previously though It sort of Flashes the lock screen I suppose you could say. The phone's screen seems to be unresponsive when it's black.
I'll start with what I know:
It isn't solely a hardware issue - The screen does turn on when you first turn on the phone. It shows the boot process. You can boot it into Download mode and the screen will stay on. You can also boot it into Recovery mode and there will be no problems with the screen. The phone can boot normally and the phone will show the whole process. The problem is post boot so I find it hard to believe it's solely a hardware issue, otherwise I should have these problems in the other modes too.
The screen isn't always off - I've managed to actually catch my phone displaying messages at the bottom of the screen for a split second. One such being that it has connected to the internet. This will show for a split second, while the rest of the screen is still dark. The screen appears to otherwise be dark with no light, looking as if it is off.
I've looked into this black screen of death issue I've heard about. I'm not sure if this is it. I've never had the issue before with any other android device I've had. It doesn't seem like it when I look at descriptions of the problem.
I have put the phone through Factory Reset, which hasn't worked in stopping the problem. As soon as the welcome screen shows up to set up my phone, it will go black again. I cleared the cache. I Cleared all data and reset it. Rebooted it in different ways. I did root it.
Would anyone here happen to know what's going on or have any possible solutions?
Hey,
I was replacing my screen, when I went to test it instead of the google logo I got a fully green screen, the phone booted, but continued to be green. The always on display looks exactly as it should. Once it was fully on, I managed to put my pin in blind and the phone all works fine (it seems), and some black gets through, I assume the screen turns off those pixels which is why maybe that shows up correctly(ish).
The interesting thing is, I did at one point have to working fully, full colour, this was between reconnecting the ribbon cable and restarting, but I pressed the power button to sleep it and then hit it again and if I remember correctly was green again. So that made me think "poor connection" of come kind. What's even more strange is that when it is green and I press the power button to sleep and wake, the screen appears at least to display the full colours at the end and begging of their animations respectively. Maybe its not full colour, but at least it's more visible.
The final thing is when I go into the bootloader, sometimes it's full colour, and others it's got the solid green effect where black isn't displayed. What's odd is, even when the bootloader is showing correctly as soon as start is click it goes to a full green screen again and we don't see the logo at all. Also I managed to get into safe mode and it made no difference. It's just odd that it seems to decide to green, rather than due to any cable tussle
Basically has to a cable issue, but I'm not sure how to troubleshoot it, and advice on how to proceed would be much appreciated. Like if the screen arrived faulty, if the connector is damaged in the phone so it can't be used, and the motherboard would need replacing.
Thanks,
Dillon
In recovery mode, there's full colour as well, I factory reset the phone, but it made no impact. However entering into recovery mode did flash the google logo and some of the screen whit, and the same thing happened on reboot from recovery mode.
It seems so odd to have these kind of consistent moments of colour and not colour if it's the ribbon
I should have also mentioned, that the clamp is broken, could that be the issue, does the connection need to be screwed in?
Also Here are some images of both the phones connection and the screens
I'd say jb weld your broken clamp before buying parts. Could be as simple as that it's not a tight enough connection