Way to set back Rom's
I've 2 mobile phones 1 already bricked by application progrom (turned in bootloop factory rest failed!)
Minimum to recover is the need of an image copy of the ROM MTK DROIDTOOLS backup
and so recovery.img and system .img.....
where Can i find these FULL rom's ???? untuched by anything ????
in need for Huaway dual sim G700-u10 android 4.2.1 with dutch language
in need for acer single sim z130 androis 4.2.2 with dutch language
non rooted non recovery changed ......
to set the devices back in initial state waaranted !!!
if not availaible can anyone publisch....
this way the devices can really be factory reset.
Firmware B115 for Huwaei G700-U10 (Western Europe)
dreuzel said:
Way to set back Rom's
I've 2 mobile phones 1 already bricked by application progrom (turned in bootloop factory rest failed!)
Minimum to recover is the need of an image copy of the ROM MTK DROIDTOOLS backup
and so recovery.img and system .img.....
where Can i find these FULL rom's ???? untuched by anything ????
in need for Huaway dual sim G700-u10 android 4.2.1 with dutch language
in need for acer single sim z130 androis 4.2.2 with dutch language
non rooted non recovery changed ......
to set the devices back in initial state waaranted !!!
if not availaible can anyone publisch....
this way the devices can really be factory reset.
Click to expand...
Click to collapse
The firmware for the Huawei G700-U10 can be found at www_android-hilfe_de (replace underscores by points). Overthere search for "firmware-b115-incl-tools". I'm not allowed to post direct links, otherwise I would have done that, of course.
Related
Here's the ZTE V793 ROM Without DIGI Apps.
Fully stock with sim 2 3G enabled, Now you can use 3G in sim 2 but sim 1 still locked.
(a) First, install CWM recovery from
http://forum.xda-developers.com/showpost.php?p=44200609&postcount=7
(b) copy the Supersu+root and Rom to SD card
(c) Full wipe
(e) Install rom , followed by Supersu+root
(f) Restart and you are good to go.
For those who cannot install recovery, or failed to connect device with flash tool, use the latest Flash Tool Here
http://ge.tt/8GDGDrE/v/34
Download
http://www.mediafire.com/download/7h9407y6j6dxpc3/ZTE+V793+Stock.zip
u test it?
any bugs?
No bug at all. I modded the lock screen to make it better, and enabled sim2 3G. Tested and working perfectly without any bug.
how did you cook it? using which kitchen?
Try search around XDA, Basically the methods are the same.
jlieu said:
Here's the ZTE V793 ROM Without DIGI Apps.
Fully stock with sim 2 3G enabled, Now you can use 3G in sim 2 but sim 1 still locked.
For those who cannot install recovery, or failed to connect device with flash tool, use the latest Flash Tool Here
Click to expand...
Click to collapse
Do u mind to guide how to flash using the Flash tool...? the phone cant be turned on... (ZTE V793 SKMM).
where to get exact scatter file & preloader...? unable to load the scatter file from your rom, invalid scatter file as the output result of the flash tool...
sorry for my bad english...
Files can be found on the given thread , please read.
Here's all the file provided by OP https://drive.google.com/folderview?id=0BzFjevWXftUyY3RQUlZjZ2s1QjA
Bug : Stock ROM
Hi jlieu..
Using your stock ROM .. I'm able to revive my phone successfully.. unfortunately.. there is a bug..
The network lock can be removed. Now, i'm able to use both SIM with 3G connection..
MAC Address keep changing and I can't change using either MAC Spoof or Change MAC Address.. as the issue at boot loader itself..
Even using terminal command : busybox ifconfig ...
Still can't resolve the issue. Need your advise.. Thank you.
My firmware file are 100% compatible for malaysian ZTE V793. Follow the instruction to get a recovery on your zte and flash the firmware provided. everything will be fine. The problem now is im getting another file sharing site to re-upload the firmware, i need some time. current dropbox link not longer working due to limitation. Anyone who downloaded my firmware kindly share your mirror if possible. I'll need some time before the file available again.
amicheal said:
Hi jlieu..
Using your stock ROM .. I'm able to revive my phone successfully.. unfortunately.. there is a bug..
The network lock can be removed. Now, i'm able to use both SIM with 3G connection..
MAC Address keep changing and I can't change using either MAC Spoof or Change MAC Address.. as the issue at boot loader itself..
Even using terminal command : busybox ifconfig ...
Still can't resolve the issue. Need your advise.. Thank you.
Click to expand...
Click to collapse
Changing the boot-loader to default network locked version might solve the issue. But mine is working fine. can anyone confirm this?
Download link are now up again. thanks to @H170kR1
:good::good:
ive done all the steps..
now my phone reboot to recovery everytime i power on the phone..
please help
skmm digi also
The sims 2 line really on 3G, thanks for making it universal When you gonna develope
CM7.2 for this phone? Really love to see it
jlieu said:
My firmware file are 100% compatible for malaysian ZTE V793. Follow the instruction to get a recovery on your zte and flash the firmware provided. everything will be fine. The problem now is im getting another file sharing site to re-upload the firmware, i need some time. current dropbox link not longer working due to limitation. Anyone who downloaded my firmware kindly share your mirror if possible. I'll need some time before the file available again.
Click to expand...
Click to collapse
I've used you rom for quite some time. I still have the rom in my drive. Can you make another more debloated version of this rom? Thank you.
Android 4.x JellyBean for ZTE V793?
jlieu said:
Here's the ZTE V793 ROM Without DIGI Apps.
Fully stock with sim 2 3G enabled, Now you can use 3G in sim 2 but sim 1 still locked.
(a) First, install CWM recovery from
http://forum.xda-developers.com/showpost.php?p=44200609&postcount=7
(b) copy the Supersu+root and Rom to SD card
(c) Full wipe
(e) Install rom , followed by Supersu+root
(f) Restart and you are good to go.
For those who cannot install recovery, or failed to connect device with flash tool, use the latest Flash Tool Here
http://ge.tt/8GDGDrE/v/34
Download
http://www.mediafire.com/download/7h9407y6j6dxpc3/ZTE+V793+Stock.zip
Click to expand...
Click to collapse
I am just wondering if there is any updated version of Android firmware, e.g 4.x JellyBean for this ZTE V793? Please advise/
thanks
Hi everybody,
recently i bought phone from China - Cubot ONE. I've been happy with it until i lost signal bars and cant connect to any network. So i google it and i found out how to fix it. Just reflash your firmware with another one. So i could not find any FW for Cubot so i downloaded for Cubot GT99 what is very similar phone and i hoped its would be working. Unfortunetly its didnt work good. After flashing this FW i could not switch on my phone or get to the recovery. I think its probably hard bricked, but iam not sure if its can be fixed when i send it back to supplier or if its any chance to do it by myself... Please iam desperate and i need any advice. Thanks.
what kind or core does Ur phone have?
I have a mtk6575 azense one, and as far today I couldn't find the original rom (i have backup of the original rom)
and I see a "universal mtk6575 rom" on internet, but I dont trust in it. because I read it can be dangerous using a kernel
from other models.
If u cant access to the recovery to flash another you may need to use "Flash tool" with the correct rom it'll fix the bricked status
I also use MTK droid tools
I have my backup but I doubt it will work on yours.
Hello, Thanks for your reply. I already sort that out. I use MTK droid tools to flash older android on my Cubot One. I think its was hard bricked, because i cant switch it on. So i try just put cable in with removed battery and hold down volume down button and after that my windows recognise phone and install driver. So i quickly flash it with stock android v0.3 and its works. But unfortunately still i could not get any network. There show me just no service... I find out that maybe i have lost imei, so i put it back with MTK Android tools. Now i got Imei numbers for both sim cards, it can recoginze my network provider but still ŃO SIGNAL! Could anybody tell me what is wrong now? I have no idea. Thanks anyway for any ideas. Regards.
Its quad core MTK 6589T, 1GB RAM, 8GB Rom, with two sim slots.
Hi,
have you checked this side: http://forum.xda-developers.com/showthread.php?t=2412068
Cheers
Help me!
Hi, I`m new on this website, and realy I don`t speake very wel english, but I have a big big problem, and I don`t know how to post this message, and I find this Post because I think is similar with my china mobile, If anybody see this post please give me a PM or help me on the email address: [email protected] it`s about my China Mobile; LAUDE Pulse S800, please help me somebody! Thank you!
Hello all and thanks for reading. I am hoping I can get some guidance and some sort of solution.
Long story short while in China I purchased a Y511-T00 instead of a Y511-U00. The first issue was upon returning home i realized I had no 3G. That I can live with using a MiFI device.
The problem I am facing is the Rom is laggy and it seems to be a half baked rom that was ported perhaps so the phone would be in english.
Facebook, Twitter and LinkedIn do not stay logged in when I restart.
Launcher sometimes freezes or goes blank for about 5-10 seconds
Contacts dont always show with a number immediately.
I am desperately in search of a Stock Rom with the regular Huawei Emotion UI or any other rom that may be more stable and user friendly. Any assistance would be greatly appreciated.
Alternatively does anyone know if i can use the U00 firmware on a T00 phone? I am worried I may brick the device if I start doing trial and error.
My phone details are as follows
Model Number : HUAWEI Y511-T00 (China Mobile)
Android version : 4.2.2
Baseband version MOLY.WR8.W1319.MD.TG.MP.V4.P18 , 2013/07/31 15:37
Kernel Version 3.4.5
Build Number : Y511-U30V100R001C328B120
Hardware version : VER.A
ZWstyles said:
Hello all and thanks for reading. I am hoping I can get some guidance and some sort of solution.
Long story short while in China I purchased a Y511-T00 instead of a Y511-U00. The first issue was upon returning home i realized I had no 3G. That I can live with using a MiFI device.
The problem I am facing is the Rom is laggy and it seems to be a half baked rom that was ported perhaps so the phone would be in english.
Facebook, Twitter and LinkedIn do not stay logged in when I restart.
Launcher sometimes freezes or goes blank for about 5-10 seconds
Contacts dont always show with a number immediately.
I am desperately in search of a Stock Rom with the regular Huawei Emotion UI or any other rom that may be more stable and user friendly. Any assistance would be greatly appreciated.
Alternatively does anyone know if i can use the U00 firmware on a T00 phone? I am worried I may brick the device if I start doing trial and error.
My phone details are as follows
Model Number : HUAWEI Y511-T00 (China Mobile)
Android version : 4.2.2
Baseband version MOLY.WR8.W1319.MD.TG.MP.V4.P18 , 2013/07/31 15:37
Kernel Version 3.4.5
Build Number : Y511-U30V100R001C328B120
Hardware version : VER.A
Click to expand...
Click to collapse
Anyone have any idea? I tried using google launcher but it tells me that I already have a default launcher and yet in applications there is no default set and the button is greyed out.
anyone idea please?
have the same phone which is rooted & I know of some stock ROMs which can be flashed with HiSuite.
I am a bit confused about what ROM you are running now, is it modded ?
I'll take a look at the build number you have specified and see what matches.
This phone is very low end Huawei.
Curious: What is the Build date ? (at bottom of about phone)
Well I have a copy of this ROM on my PC & it matches the Build Number (see screenshot) of what I have on my phone now.
It's stock but contains root too, so I have read. However I actually have not flashed my phone with this ROM.
It runs OK, some system messages still show in Chinese, but those are rare.
I rooted mine via an alternate method, I plan to slowly do some more tweaks when I have time
The ROM is around 270 Mb & another chopped version down I have is about 180 Mb
I cant see why you cant get 3G network, I am in Mainland China and have no real issues here, hope it works in Australia when I visit there.
With root I am sure you could tweak this.
My HuaWei USB 3g USB card works fine in Oz & China.
The primary use of this phone for me is to supply my 10" Tab 3 with 3G via WiFi.
Solution finally
After about 12 hours or so of trying different rom's namely u30 rom's including custom roms like Lewa Os. i realised that everytime my baseband would come up as unknown.
I finally used HUAWEI-Y511-T00 flash with SP Flash Tool to flash a basic T00 rom with no bloatware whatsoever just the core android apps.
I then used ES File, Framaroot and the South African system.img . I extracted all of the APK files from the system.img from the U30 rom and copied them one by one setting permissions to read, write - read - read for each Apk. I did a dalvic wipe and a cache wipe and restarted.
The end result is I know have Google Apps (the ones that I wanted) running perfectly with sync etc across all apps and my china mobile Y511-T00 now behaves like a normal y511-U00.
Points to note, you will need to backup your NVRAM so you can restore your imei and mac ID to get rid of the Warning NVRAM error. You will also need to write your original IMEI back use MKTdroid tools.
Custom rom's will not work, but I have set google launcher as my launcher and removed the regular launcher which I am happy with.
What ever you do, make sure you make a back up. The only thing I have not fixed is the startup animation and logo which i can live with. For UMTS / 3G I am using a mifi device that gives me 8 hours on the go but i barely need 3g as i use wifi more than anyting at home and office.
@ZWstyles
Yeah nice you have it sorted.
Still surprised you cant make use of 3G network natively in the phone do you have any ideas on that ?
Hello, I have 2 phones in the hands of the China-Telecom CDMA network: Huawei P8 - CL00 (dual sim) & Huawei honor 6 plus - CL00 (dual sim).
Currently my phone sim locked 1 should only be used 1 2G sim mode ... how to turn off the CDMA mode on your phone to be able to use two SIM and 3G mode ? ...
I try whit code*#*#2846579#*#* but is not working because in the meniu to acces background debug is a password that i dont know (this is at emui 3.1 or higher) at emui 3.0 is working but now i have 3.1 emui and i dont manage to downgrade the phone
did u upgrade the device to lollipop (Honor 6 Plus), if you want to downgrade i have a file which will help you to downgrade.
Yes i want to downgrade to kitkat
Nobody cant help me to downgrade the phone pls
I don't know about downgrade, try looking into settings for modes in cellular data section
I dont have in settings menu cellular data for that i have to enter the project menu (*#*#2846579#*#*) but at android 5.1 i cant change settings because i need a password at background menu only at android 4.4 i can do this but i dont know how to downgrade
I solved the problem thanks to dhawalhariyani
Bleoceri said:
I solved the problem thanks to dhawalhariyani
Click to expand...
Click to collapse
Please share here how you solved it so that it can be a manual for other people who want to do a similar process with the same or a similar phone.
Thanks
Hello community I successfully did the rebrand to L22 indian from L24 Us .. but i did it with only one intention : the posibility of using 3G H or H+ data conectivity on 900 MHZ or 4G LTE on 1800 MHz and it didn´t work.. Because in this forum i read taht 6x limitations where driven only for region limitations...so i tryed and failed on that.. phone worked perfectly but conecting only on 2G Edge network so no internet for it... With that sayed .. I decided to go back to previous and stock L24 firmware .. wich i previously backed up with twrp ... so i did restored the oem info usin huawei multi tool... the adb reboot recovery ther on twrp restore my bakcup... Everything fine up here but now it shows a Huawei logo on booting and Biul Number is NRD90M test-keys ... and it was BLN-L24C567B378 ... so what can i do? where can i find correct files for that or dload method? or do i have to restore anythign else with twrp..? Please Help and thanks in advance... Best regards to all of you...
Flash all three files of stock firmware again using huru updater
Ok thanks but where can i find stock for L24..? the right is B378... couldn´t find it.. oh and can i used the files saved by twrp in anyway..? sorry total noob here...
thanks