Database Info

Prestigio pmp5670c

Hello. i want to ask if someone have Clockwork mod or some custom firmware on Prestigio PMP5670c Android 4.1.1.
I managed to root it, but i realy dont like this Android version and Prestigio is not intrested in upgrading.

Hey can someone make a recovery for this tablet.
Sent from my PMP5670C_DUO using xda premium

Shawes said:
Hello. i want to ask if someone have Clockwork mod or some custom firmware on Prestigio PMP5670c Android 4.1.1.
I managed to root it, but i realy dont like this Android version and Prestigio is not intrested in upgrading.
Click to expand...
Click to collapse
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Touch chip is Goodix GT911, screen size is 800x1280 px. I managed to get touch working but partialls. First aprox 1.2 inches of top of screen are not responsive to to touches. After that 1.5" touch works normally.
I'm pretty sure I'm sending wrong configuration data array to chip and thats why its not working as it should, but have no time at the moment to toy with it. If anyone experienced with Goodix chips, pm me with ideas...

stane1983 said:
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Touch chip is Goodix GT911, screen size is 800x1280 px. I managed to get touch working but partialls. First aprox 1.2 inches of top of screen are not responsive to to touches. After that 1.5" touch works normally.
I'm pretty sure I'm sending wrong configuration data array to chip and thats why its not working as it should, but have no time at the moment to toy with it. If anyone experienced with Goodix chips, pm me with ideas...
Click to expand...
Click to collapse
Update: I started to toy with stock kernel and cm10.2 (my first CM ever, was working with AOSP based SoC manufacturers sources). Problem is that device uses separate partition for internal sdcard, so have to disable emulated storage.
Things done:
- recovery
- android is built against precompiled stock kernel
Status:
- after bootanim and starting apps screen android reboots and starts back with bootanim. This was one day tryout, will debug it later today. Thanx to TeamNostalgia's preparation for cm10.2 on Amlogic MX. I used their framework and device stuff, upgraded with latest amlogic version of sources. Because of SLA I have with Amlogic, I cannot put it online.

any news abouth root final this tablet?
thx for info

stane1983 said:
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Click to expand...
Click to collapse
klobasica said:
any news abouth root final this tablet?
thx for info
Click to expand...
Click to collapse
On the link abouve is posted rooted stock firmware (mine post). To lazy ones click here

no, no...sorry i mean custom rom if is posable to create for this tablet...

klobasica said:
no, no...sorry i mean custom rom if is posable to create for this tablet...
Click to expand...
Click to collapse
It is. I'm not CM guy really, but its possible. If anyone interested, TeamNostalgia's github does have decent tree for Amlogic MXS tablets. I did some CM10.2 work for that tablet, but ended up with bootloop and reboot eventually. Didn't had time do debug it.

Here 4pda.ru/forum/index.php?showtopic=504411&view=findpost&p=29560411 is a customized firmware from Prestigio PMP3970B to work on Prestigio PMP5670C. But it does not run on PMP5670C, stands on the splash screen. Maybe someone will take to complete the firmware, it is better factory firmware for the tablet PMP5670C

ksh2000 said:
Here 4pda.ru/forum/index.php?showtopic=504411&view=findpost&p=29560411 is a customized firmware from Prestigio PMP3970B to work on Prestigio PMP5670C. But it does not run on PMP5670C, stands on the splash screen. Maybe someone will take to complete the firmware, it is better factory firmware for the tablet PMP5670C
Click to expand...
Click to collapse
I fixed U-Boot (wrote my own to support device tree kernel - 3.10.10) and fixed touch screen. I did not upload this fw, started to work yesterday on amlogic's 4.4 sources (they support both mx and m8 chipsets) (no, I cant share, I have SLA with them), I have boot, only left few things to test and then I'll upload 4.4.2.

Thank you for keep working! Waiting for rom)
Sent from my GT-I5510 using xda app-developers app

cyanodeff said:
Thank you for keep working! Waiting for rom)
Sent from my GT-I5510 using xda app-developers app
Click to expand...
Click to collapse
Here's beta version of rom: http://www.stane1983.com/prestigio_pmp5670c/
Read install instructions, needs to be installed twice, uboot still not perfect. Waiting for feedback
Btw, it's 4.2.2 rom, KitKat doesn't work good (unstable) on MXS chip.

Installed today morning. Seems all good! Thank you very much
Sent from my GT-I5510 using Tapatalk 2

babicsbalu said:
Unfortunatelly I can not able to install it because the second install is freezing all the time, now I can not install official 1.0.0.5 ROM, it stucked during the installation.
Click to expand...
Click to collapse
Rename uImage_recovery to recovery.img (when installing back stock firmware).

babicsbalu said:
Now I successfully installed the 1.0.05 but there is a quite big issue: I can not able to install anything from Play, the Download Manager is acutally (lots of system apps too) 0.0kb
Click to expand...
Click to collapse
I'm really sorry for inconveniences. With 1.0.05 files on sdcard, delete factory_update_param.aml file and boot into recovery (as if you want to install firmware). From menu using vol +/- and power for select choose factory reset (data partition is not formatted using old partition layout, thats why you have 0kb). After that you also can reflash firmware if you want (just select zip from sdcard).

stane1983 said:
Here's beta version of rom: http://www.stane1983.com/prestigio_pmp5670c/
Read install instructions, needs to be installed twice, uboot still not perfect. Waiting for feedback
Btw, it's 4.2.2 rom, KitKat doesn't work good (unstable) on MXS chip.
Click to expand...
Click to collapse
My daughter get this tablet from her grandfather on 03.05.2014 ( I guess she is lucky about that date ), and it was so slow and ugly and everything.
I installed your bety rom and everything is perfect. BUt after first reboot i get setup wizard again, but the first time after Install I only get FC ( just like I should ) but it didnt throw me back to setup wizard again.
Can I expect wizard setup every time I reboot or?
And Yes, thank you a lot for this awesome and fast work. The tablet is now so much more usable.
HVALA TI STANE MNOGO => THANK YOU STANE A LOT

@stane1983 I have the same problem as @babicsbalu. My pmp5670c is also stuck at black screen after rebooting and installing new stock firmware. I did both, renaming from uImage_recovery to recovery.img and deleting factory_update_param.aml and every time with the same result.
Please help me!
Or you can PM me (I'm from Croatia)
Hvala ti!

Well I also have prestigio tablet pmp5670C_BK_DUO and within a week it got bricked somehow. I guess that broken charging pin on cable had something to do with it - probably did a short circuit or something and boot loader got corrupt. Tabled was responding to connection of new charging cable, but only backlight turned on. There was no logo or anything.
I browsed several pages and nothing worked. I tried with official upgrade from SD card but it didn't work. It started to upgrade, android-upgrade logo came up, but after reboot nothing happened. Damaged bootloader was unable to start the tablet.
After a day or so I finally found a way how to unbrick it! Yeah.... So in attached file there is the detailed procedure, which I found on some Russian page.
Good luck!

Recovery.rar no longer available
imarkic said:
Well I also have prestigio tablet pmp5670C_BK_DUO and within a week it got bricked somehow. I guess that broken charging pin on cable had something to do with it - probably did a short circuit or something and boot loader got corrupt. Tabled was responding to connection of new charging cable, but only backlight turned on. There was no logo or anything.
I browsed several pages and nothing worked. I tried with official upgrade from SD card but it didn't work. It started to upgrade, android-upgrade logo came up, but after reboot nothing happened. Damaged bootloader was unable to start the tablet.
After a day or so I finally found a way how to unbrick it! Yeah.... So in attached file there is the detailed procedure, which I found on some Russian page.
Good luck!
Click to expand...
Click to collapse
I had a similar problem here and this method seems promising, but the recovery file indicated on the PDF is no longer available. Would you still have it lying around somewhere?
Thank you!!

PMP5670c Duo
I got this tablet 2 month ago, i have found on w w w 4pda ru 4 custom rooms for this tablet and i used google chrome to translate in english to understand what i have to do, i have instaled every one rom but i got a problem, with all custom rom the internal storage disapear. I instaled stock version now and the internal storage is there ready to be used. Custom roms are better than stock rom but it's annoyng me the missing internal storage. Anyone with this problem or anyone know how to fix it?
Edit: I instaled stock rom then i instaled again Firmware v.1.0.10 from MrCheba Repack and now i have internal storage working maybe reinstall the stock rom fix it.

[ROM][All-F2FS]KitKat 4.4.4 KTU84P stock odex All-F2FS

*******
Download KitKat 4.4.4 KTU84P stock odex All-F2FS rom
(thanks to bshiznit for the base)
(thanks to Legolas93 for all F2FS work)
- To enable busybox run-parts (init.d scripts) flash this zip
(thanks to brainmaster, from Rastakat thread)
- To install Superuser install this zip
*******

AN ALTERNATIVE:
Vanilla by rascarlo
(original thread)
1a. Flash Vanilla by rascarlo KK4.4.4 ALLF2FS- 2014-07-09
1b. Flash Vanilla by rascarlo KK4.4.3 ALLF2FS- 2014-06-10
2. Install PA Mini Gapps:
Android File Host
Dev-Host
3. Enable busybox run-parts (init.d scripts) flashing this zip
(thanks to brainmaster, from Rastakat thread)
4. Install Superuser flashing this zip
***********

SUGGESTION:
If you want to flash an F2FS kernel with only ramdisk (carcosa, faux, oxydo, ...) i suggest to flash latest M-Kernel before, since M-Kernel has an optimized ramdisk (so the new kernel will use M-Kernel's ramdisk).

Anyone install this?
I downloaded this, but was wondering if anyone has installed it and what they thought so far.

The_Engine said:
I downloaded this, but was wondering if anyone has installed it and what they thought so far.
Click to expand...
Click to collapse
It is really smooth, since it is odex.
You will not be disappointed.

So far so Good
Up and running and setting everything up. Nice and smooth so far. Will report back after more use.

Only 273 MB? What did you remove?

edisso10018 said:
Only 273 MB? What did you remove?
Click to expand...
Click to collapse
I removed apps that can be downloaded from Google Play (maps, keep, hangouts, earth, books...)
Otherwise stock odex system is too big for F2FS filesystem.
Now it fits and you have about 15-16mb free.

One thing I am seeing but I think it has nothing to do with the rom is slow charging. I am on the 4.23 boot loader but am still seeing a problem. Saw it on Cm 11 MR7 as well. Is there another bootloader I should be on? Otherwise all is running smooth on this build.
Sent from my Nexus 7 using Tapatalk

just wipe and flash in recovery right?

rayraycarter4 said:
just wipe and flash in recovery right?
Click to expand...
Click to collapse
As long as you already converted to F2FS yes. Minimal G Apps are included, but anything missing can be downloaded.
---------- Post added at 02:44 PM ---------- Previous post was at 02:42 PM ----------

No way to install it. All wipe and install ok but don't work.
Don't pass of Google screen.
Click to expand...
Click to collapse
PD.: Sorry, was an error with bootlader

The_Engine said:
One thing I am seeing but I think it has nothing to do with the rom is slow charging. I am on the 4.23 boot loader but am still seeing a problem. Saw it on Cm 11 MR7 as well. Is there another bootloader I should be on? Otherwise all is running smooth on this build.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I have slow charging since I bought this tablet.
For this reason I always charge it overnight...other than changing bootloaders I don't know what can be done.
dpunx said:
PD.: Sorry, was an error with bootlader
Click to expand...
Click to collapse
I am glad you succeeded to enjoy this rom.

Monfro said:
I have slow charging since I bought this tablet.
For this reason I always charge it overnight...other than changing bootloaders I don't know what can be done.
Click to expand...
Click to collapse
It's funny but I never had lag issues. Keep reading about the disc problems and lag and all that but seemed like I was fine. Then one day the device passed some threshold and it came to a creep. That's when I finally rooted it and started with roms but none helped until the F2FS movement started. That's when I started seeing complaints about slow charging. Never had that before. Now I do.
I should stay off these threads. LOL
Sent from my VS980 4G using Tapatalk

The_Engine said:
It's funny but I never had lag issues. Keep reading about the disc problems and lag and all that but seemed like I was fine. Then one day the device passed some threshold and it came to a creep. That's when I finally rooted it and started with roms but none helped until the F2FS movement started. That's when I started seeing complaints about slow charging. Never had that before. Now I do.
I should stay off these threads. LOL
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
F2FS makes this tablet working really good, totally removing the lags that a lot of people experienced.
If slow charging is the price we have to pay, I think is ok.
I had for 5 months a Galaxy Tab 2 (which I sold for N7): compared to it N7 has always been slow on charging.
Anyway is really fun tinkering, flashing and playing with roms. [emoji2][emoji2]

Monfro said:
I have slow charging since I bought this tablet.
For this reason I always charge it overnight...other than changing bootloaders I don't know what can be done.
Click to expand...
Click to collapse
Hi!! I also had this problem after few months of use... Then I realize that the original cable was the reason (was malfunctioning). I changed the cable and Voila! Fast charging again...

How can I activate ART?
Gesendet von meinem HTC One mit Tapatalk

W0WA said:
How can I activate ART?
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
This is stock 4.4.4 rom released by Google: ART is not available here.

Hmm... I seem to be stuck while booting, I can't get past the 4 colour boot animation.
I have a full-f2fs recovery, full-f2fs properly setup (my previous rom was the full-f2fs version of OmniROM), I've done a factory reset and a dalvik wipe... I don't know what else it could be.
Do I need a specific bootloader version? I think I have 4.13.

GiSK said:
Hmm... I seem to be stuck while booting, I can't get past the 4 colour boot animation.
I have a full-f2fs recovery, full-f2fs properly setup (my previous rom was the full-f2fs version of OmniROM), I've done a factory reset and a dalvik wipe... I don't know what else it could be.
Do I need a specific bootloader version? I think I have 4.13.
Click to expand...
Click to collapse
If you already formatted all partitions to F2FS it should work.
If you have a backup of Omni try a dirty flash, wiping only cache+dalvik.
I don't think latest bootloader is fundamental.

Kernel Modied For System Write Protection

Many users have problems with writing on system partition and for removing the bloatware as it comes back on restart, after a bit research i reached on the chinese websites to a result and found this kernel so difficultly as i didnt understand chinese, just flash it with flashify and it will work flawlessly, get flashify free from playstore, select the boot and then select this kernel and enjoy. Now no problem with Adaway and gsam batterymonitor etc or removing the bloatwares
Requirements : I have tested or desire 820u dual simbut it should work on all 820 models version : 3.10.28
Im not responsible for any brick, i hve tried on 820u and its working well, it should work on all

Works fine on my 820 single sim. After restart apears red announcement that kernel is for Htc internal purposes, but it's acceptable. Thank You for posting it
Sent from my HTC Desire 820 using Tapatalk

can you please tell how to apply this mod
or can you make one for lollipop d820u

pathmos said:
Works fine on my 820 single sim. After restart apears red announcement that kernel is for Htc internal purposes, but it's acceptable. Thank You for posting it
Sent from my HTC Desire 820 using Tapatalk
Click to expand...
Click to collapse
Hi, I have 820 single sim and red announcement that kernel is for Htc internal purposes appers on the white screen, but i can't do anything, after a few seconds twrp recovery is opening.
I tryed install Tomal's Discovery v2.00, installing working fine but device is same startup, then i tryed TWRP dump of rooted Lollipop for single SIM device (a51_ul), europe but same result.
Any idea!?
Edit: After 8-10 times from recovery choise bootlader finally worked, system write working too.

any other way to fix recovery loop?
I'm rebooting.. rebooting..
manage to enter HBOOT byt after restart -> recovery..
also. charger is turning phone on after recovery -> power off..

This kernel is only for Kitkat.

And where is this information in this topic?

This Thread was written before the lollipop update. We use it for the Kitkat rom, so its for Kitkat. You cant use a kernel for different os versions.

ok. got it, thanks.
is there any fix for writing on system partition and for removing the bloatware for Lpop?

Kellwa said:
can you please tell how to apply this mod
or can you make one for lollipop d820u
Click to expand...
Click to collapse
Its compatible with d820u , i have tested it on kitkat

suhaibahmad said:
Its compatible with d820u , i have tested it on kitkat
Click to expand...
Click to collapse
For kitkat its compatible .. not lollipop
For me i don't need it any more thanks because i paid some money and get S-OFF

Alternative rom for Vowney self testing

here is alternative rom for Vowney maybe someone can build it.
I flashed this rom for Vowney its work but name of telefon changed to Hasee.... its have to be changed in build prop.
and its only english and chinese language
How to flash
1-download Rom Vowney and Hasee rom
2- entpack both roms and delete system and userdata img from vowney rom
3-take only sytem and user data img files from Hasee rom put in to vowney rom
if you want change also boot logo take also logo.bin from Hasse rom put in to Vowney rom
4- Hasee rom file download-------http://www.needrom.com/wp-content/uploads/2016/01/HASEE-HL9916004.zip
5 Vowney rom https://mega.nz/#!WtFRjIQb!NrQlJeemUZVz0Lr9SlgM2pap7MDkYZPiz1PdTkn0yuI
6- in SP_Flash_Tool------ flash it done

Has anyone ever tried this rom? Are there some differences between Elephone's original ROM (which is very bad) and Hasee's rom? I would try Hasee's rom but I would like to have further informations about it
Edit:
I tested it:
no gapps
fingerprint doesn't work (application crash when setting)
the rom recognizes only 3 gb of ram
the phone is very hot
ok video 4K...
test in progress

4K recorded properly?
4K recorded properly?

Llopbal said:
4K recorded properly?
Click to expand...
Click to collapse
Sorry, I have not run records and now I installed the original rom given that no one has thought of doing the same my test

Thank you for try this Rom I found this Rom information by elephone officials Website and this Rom has function by me but I don't have experience about Rom building I thought maybe some Developer can do it for everyone the elephone vowney user

http://www.needrom.com/download/hasee-hl9916004/
Here is from Rom information

Is it possible like before hasee rom install this rom?
http://forum.xda-developers.com/pure-xl/orig-development/rom-allview-s-stock-modified-soon-t3366508

Vowney Hasee self testing Rom
I've been using this for a while. It's made my vowney a proper phone. Gets a little hot but better than stock. Everything works apart from Fingerprint.

Flashing succes finally...
Yep...
After a very long battle i have also been able to install this experimental vowney-hasee rom...
I have Windows 7, x64.
I encountered many problems on the way, of which nobody said anything on the posts above:
- everytime i tried flashing , the MTP USB device driver could not be installed by the windows update process, which i couldn't stop untill it finished searching for the driver and couldn't find it... It lookslike the problem is in the phone itself. Solution found: reboot phone, wipe cache partition.
- when trying to flash using guide above, phone got never detected by flashing software and gave error:
"the memory buffer for loading image verification fail"
That i could not get over ... but... i found something on another forum...
And i ended up flashing the rom using that tool, successfully !!!
Tool downloaded is SP_Flash_Tool_v5.1524.00.000.zip
Same procedure: Load DA file, load scatter, click "Download button", restart phone. Imediately after restart, phone starts getting flashed by software.
Now i have a new problem: i can't damn find to change to english, from chinese language, but i'll be back with details on it.
:good:

Ok, after having the rom for one day i considder it still very dissapointing in that that everything is chinese and there is no gapps at all. Tried to install manually Play Store, it didn't work at all after install...
Unusable... Flashing 20060125 original Vowney update back...

sagimarius said:
Ok, after having the rom for one day i considder it still very dissapointing in that that everything is chinese and there is no gapps at all. Tried to install manually Play Store, it didn't work at all after install...
Unusable... Flashing 20060125 original Vowney update back...
Click to expand...
Click to collapse
Change Language from Chinese to English

I found english, i changed to english, but there are still a bunch of stuff in chinese, that's what i meant... And no chance to install gapps....
And no working TWRP ...

I did
Traton said:
Change Language from Chinese to English
Click to expand...
Click to collapse
Yes, i did. That's what i mean... Even after changing language to english, still half the rom stays chinese and the most disapointing thing is: no chance to install google apps. n

alternative rom...
model: Creo Mark 1
Link download

Interesting..
did you try it on? any experiences with it?
does the camera make better detailed pics?
does it still warm up when used with video / skype etc ?

pakyto said:
alternative rom...
model: Creo Mark 1
Link download
Click to expand...
Click to collapse
I tried it, but i cant get it to work, after flashing it the phone only shows elephone logo

I flashed the creo mark 1 ROM successfully today. After flashing with sp tools, I rooted then immediately went into recovery, applied super su, then wiped dalvik cache, & cache. It then booted into creo ROM. Every thing worked apart from no 1 sim card. No 2 worked. Location always on & had to apply WiFi before setup. Has a cool auto update feature. Camera very good. All google services worked & updated. Never tried to make a call, but it showed answer machine message. I reverted back to stick 5.1. Somebody might see a ROM similar with 6.0 or 7.0 I can fiddle about with. Also the haase ROM also works very similar. Shame about the vowney phone, I bet 7.0 would run beautiful on it.

X9009 OPPO F1Plus CM12.1 BOOT, URGENT,DEVs needed..

Hey everyone here, i have tried some wuxian CM builds last couple days back, firstly i'm not a new guy on this things, flashing,rooting android devices, but here i now asking everyone of you.
Bad project i started picking my wife's phone as a test. Rooting with someone here @xda tgread sharing some autoroot zip, then i flash the twrp, i've backup of stock recovery.. And am not stop there you know its should be amazing if you run some AOSP based rom on this beast, then i start searching, and jumping from some thread out there Vietnam,chinese forum and i'm really lucky that found the Wuxianlin sharing files from some chinese giant search engine, i'm really happy downloading some stuff and damn cool he has the CM12.1 which i really thank him for it, he's actively pushing some new builds, as i found some number builds at there.
Yaaay its CM12.1 , i fully back up the rom with TWRP then flashing the CM12.1 and opengapps 5.1 ..rebooting right after flash WTF Cool its boot and its 100%fully stable & smooth, except the simcard won't detected as i found that in setting app seem the baseband is unknown (i do have a backup of NVRAM,imei,etc).. i dig it more how that sim cannot be detected, my personal reasons: its because the Wuxianlin build its CM based/specific R9m(Chinese varian), as i'm on international variants (X9009) so i tried thingking to make some changes/convert the devices as R9m, restoring the stock recovery (this the fault ive made as i believe Wuxian has the stock recovery of some official build) ,downloading the official rom that Wuxian reserved on his drive, flashing the stock recovery(my backup), and flashing official rom from him, but its failed to update.. Panic started here as i already wiping the rom si there's no chances to boot into the rom , as stock recovery won't mounted as MTP this a really annoying, now i'm stuck on recovery(official).
Searching some SPFlashTool rom and this was my last chances to bring my phone back to live, damb its really hard to find the SPFlashtool ROM for this devices, till ive finally found one on Vietnam forums, downloading and extracting the rom , try to flash it but always failed, the more panic situations comes up when i choose the upgrade tab on SPFlashtool option (which its formated whole partitions) and yess its still failed to load, some error pop-up right after the yellow bar flashing progress..seems the scatter file was fault,missmatch as the error said.
Now i'm stuck on blackscreen and no recovery, its only vibrate when i try to power it down. I REALlY NEED help and please somebody here share me the MTKDroidtools backup rom, or some has the SPFlashtool Firmware please share here thanks

Hi plz guide how to install cm12.1 on oppo f1 plus
Sent from my SM-N900 using XDA-Developers mobile app

Not now till i fixed this phone sorry, just in case nobody got the same problem as mine

Back in actions..revived mine now trying to flash the CM again, can you guys help me which baseband files to backup on mediatek devices

Prooof

GREAT THANKs @wuxianlin credit and BIG RESPECT for him
Known bugs on X9009 (international)
-NO SIM, No imei, perhaps i need to convert to R9m then see is the SIM detected.
-Video recorder only show Green colour
-fingerprint not detected
-BSOD

Plz share instructions. How can we install the same. Thanks in advance
Sent from my SM-N900 using XDA-Developers mobile app

Will share it need time to mirroring some files damn BAIDU was too slow.. Hang in there, i'll share you some links in here

OK thanks
Sent from my SM-N900 using XDA-Developers mobile app

Waiting for your reply
Sent from my SM-N900 using XDA-Developers mobile app

Rooting instruction and needed files head to here http://forum.xda-developers.com/opp...de-rooting-oppo-f1-plus-t3413939/post67649763
And fore those whose wanna try CM12.1 by Wuxianlin make sure you have a BACKUP!!! *warning currently twrp backup cannot be restored system partitions won't restored. *Do resize system partitions on TWRP (make sure that you mounted the system before) to be able restoring that huge system partitions.
Inclueded in drive folder :
Google Drive https://drive.google.com/folderview?id=0B5a7P0fADT0_U0dSYnNxbHg5ZDQ
1. update.zip for root the devices
2. TWRP ver 3.0.2 flash with flashify
3. CM latest build from wuxianlin netdisk.
4. Stock Flashtool rom just incase you mess with your phone.
5. FlymeOS + keyguard fix
Known bugs Cm12.1
- No SIM as this build based on R9m(chineseversion)
- GREEN video recording
- sometimes BSOT
- Fingerprint doesn't work
Some sources pergaps help some devs as refference:
https://github.com/wuxianlin/android_vendor_oppo_r9
https://github.com/wuxianlin/android_device_oppo_r9
CREDIT&THANKs to Wuxianlin a chinese Oppo Dev, big respect to him.

Thanks downloading now. Will let you know
Sent from my SM-N900 using XDA-Developers mobile app

Some method Trying to make the SIM detected, but all useless and FAILED :
1- trying convert X9009 variant to R9 downloading firmware flashtool, but failed to flash the R9rom to X9009, some error on flashtool that cannot be translated since its in Chinese.
2- flashing via TWRP, since rhe twrp its self was build for R9 variants, downloading some OTA (StockRom of R9), flashing and its boot up, everythings work good here, finger,sound,sensor,camera etc, except no gapps, and SIM not recognized the baseband itself was unknown status, and mess imei numbers.
3- Backup whole imei and basebands related partitions on stock X9009 (NVRAM,SECRO,NVDATA), flashing R9 stock OTA&rooted, restoring whole Backup parritions bellow and still no luck, Baseband status unknown.
-flashing CM12.1 rom and restoring the whole backup baseband and imei related still failed.
4. Try to use MTKDroidTool somehow the NVRAM&Imei backup cannot be done since the tab not even click-able.
CM12.1 it does have rhe sane issue/bug according to wuxian*
"R9m is my own machine, do not intend to often used to play ROM; CM just do play, do not seriously; the other hand, it is estimated that not many people have a third-party ROM needs.
Known bugs:
1. Fingerprint can not be used
2. Unicom card needs to re-card only signal, mobile card does not seem to signal"
If anyone of you has some suggestions,advice..share here please and thanks

Not working
Sent from my SM-N900 using XDA-Developers mobile app

What's not work?

Rooting was successful
But tarp with flashify was unsuccessful
Sent from my SM-N900 using XDA-Developers mobile app

Grant root access for flashify backup your stock recovery before flashing the TWRP its work for me, even on the latest OTA

But as you mentioned sim is not working and the fingerprint is also not working.
Sent from my SM-N900 using XDA-Developers mobile app

Its for CM not caused by flashing TWRP, ots just optional if you wanna try AOSP sensations just flash that CM

Can you plz give link for that
Sent from my SM-N900 using XDA-Developers mobile app