The order of things i've done
1. Root
2. Install BusyBox
3. Install Superuser
4. download Rom manager
5. Download Titanium Backup (and make backups)
6. Flash clockwork recovery
7. Creat a Nandroid backup
8. Flash leaked 2.2 (10/2/10)
I now am looking to use the one-click flash to go straight to 2.2Beta5.5. The cognition FAQ stated:
From 2.2 Froyo
Odin Flashable ROMS
ONLY USED FOR THE ODIN FLASHABLE DOWNLOAD!!! DesignGears has provided us with a new way to flash. The Odin Flashable ROM. This .zip contains everything you need to flash a ROM using ODIN. It includes:
Odin.exe
PIT.pit
PDA.tar
PHONE.tar
CSC.tar
To use this, please see the ODIN page for more information. However basic instructions are:
Open Odin
Put Phone into Download Mode
Use ODIN to browse to all the Appropriate Files
Connect your phone
Hit Start , Watch the magic
Click to expand...
Click to collapse
Do i simply download the link provided on this page (the exact same one u used to get 2.2 in the first place)
showthread.php?t=797282
or do i download the "2.2BETA5.5_ODIN.zip" on his download page
Is what i'm asking even achievable? or do i need to revert back to 2.1 before i can use that flashable rom for 2.2beta5.5.....
This needs to be in the Cognition thread
<Insert "this belongs, etc, etc." comment here>
But to answer your question, Odin would probably work but you can also follow the replace kernel method in the Cognition FAQ located in the first post in the Cognition thread.
Designgears created the odin installer and put it on his site for people who aren't comfortable with kernel swapping. What you are asking is possible, but not from a .zip in rom manager unless you change the kernel which needs odin to begin with.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Kernel swapping will not result in you having to change much of your settings back other than what Cognition changes with each update. Using Odin will clear everything like a fresh flash [except the internal SD].
To a TiB and run Odin. Its easier and faster.
Hi guys, I'm gonna try and keep this short and sweet. I've got an s4 that is "rooted", which is preventing me from using a banking application so I decided to unroot it.
Anyway after watching umpteen videos and reading forums I have downloading Odin3 v1.85
I have also downloaded I337UCUAMDL tar file. Anyway from my amateur standpoint, I put it in download mode, opened it in Odin. Selected the appropriate tar file, (just checked the auto-reboot box) and clicked start. After all of this it tells me write Failed in a big red box. I have absolutely no idea what I am doing and I am now downloading the updated version of the tar file I need which is called "I337UCUFNB1" to try it again, I have also enabled debugging mode on my phone.
Any light on what I am doing wrong or what I should be doing will be very helpful. Thanks (please go easy on me as I actually have no idea what I'm doing)!
verojie said:
Hi guys, I'm gonna try and keep this short and sweet. I've got an s4 that is "rooted", which is preventing me from using a banking application so I decided to unroot it.
Anyway after watching umpteen videos and reading forums I have downloading Odin3 v1.85
I have also downloaded I337UCUAMDL tar file. Anyway from my amateur standpoint, I put it in download mode, opened it in Odin. Selected the appropriate tar file, (just checked the auto-reboot box) and clicked start. After all of this it tells me write Failed in a big red box. I have absolutely no idea what I am doing and I am now downloading the updated version of the tar file I need which is called "I337UCUFNB1" to try it again, I have also enabled debugging mode on my phone.
Any light on what I am doing wrong or what I should be doing will be very helpful. Thanks (please go easy on me as I actually have no idea what I'm doing)!
Click to expand...
Click to collapse
If you are doing all that just to use a banking app then I would like to point out that there are already apps and modules that enable you to completely hide your root from such banking apps.
Hope it helps. ?
I need to get my device recognized by windows 7, and the samsung site provided an install of drivers which appears not to include the Skyrocket. I attached the folder structure of the USB driver install in the below picture. How can I get up and running with drivers?
http://imgur.com/a/ux6yy
check here under utilties http://forum.xda-developers.com/showthread.php?t=1785999
vincom said:
check here under utilties http://forum.xda-developers.com/showthread.php?t=1785999
Click to expand...
Click to collapse
Vincom,
Frankly I don't trust some MediaFire share purporting to be "drivers". The last thing I want is to be added to someone's botnet since I chose to go through third-party channels. Can you offer me advice with the file that Samsung supplies?
vincom said:
check here under utilties http://forum.xda-developers.com/showthread.php?t=1785999
Click to expand...
Click to collapse
Vincom,
Frankly I don't trust some MediaFire share purporting to be "drivers". The last thing I want is to be added to someone's botnet since I chose to go through third-party channels. Can you offer me advice with the file that Samsung supplies?
ive used it b4 w/out issues.
as to kies which one did u try, kies or kies3. kies would be the one you need, if it supports the sr idk but i dont see why it wouldnt.
i would say from your pic you would need 24_flashusbdriver but where did you get those files
I managed to pull some files together including the .pit file from my now working tablet and make a fully working 4 file firmware and combo (all in one) firmware that CAN be flashed with Odin. I have tested it on my device and it does work. Since I know people are searching EVERYWHERE for this, I have released a download link for these files below.
Please, feel free to re-post this anywhere, just be sure to credit me.
DISCLAIMER (Obviously): I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE AFTER FLASHING. KEEP IN MIND THAT ANYTHING CAN GO WRONG, EVEN IF YOU'RE FLASHING FIRMWARE THAT IS MADE FOR YOUR DEVICE. THE FIRMWARE AVAILABLE BELOW HAS NOT BEEN MODIFIED, ENGINEERED, OR EDITED IN ANY WAY TO CHANGE THE FUNCTIONALITY OF YOUR DEVICE. IF YOUR DEVICE BRICKS AFTER FLASHING, IT'S ALL ON YOU.
Flashing instructions:
But first, the requirements:
1) SM-T337A, Obviously, but seriously, I can't stress how important it is that you check that your model number is matched with the model number in this thread before flashing anything.
2) A Windows pc (NOT A VIRTUAL MACHINE! Using a VM to flash your device has a high chance to hard-brick your tab, and make sure your computer is running Windows XP or newer.)
3) Your device's USB transfer/charging cable
4) A Brain (Obviously)
Now then, the actual steps (4 File Firmware):
1) Boot your tab into download mode (Shut the device down completely, then hold down the power, volume down, and home button at the same time until a warning message appears)
2) Download and open Odin on your pc
3) Grab the USB charging cable and plug your tab into your pc
4) If Odin does not show your device in the list (It will display an "Added" message if the device is detected) download the Samsung USB Drivers for Mobile Phones and install it to your pc. You may need to/and it is recommended to restart your computer after installing the drivers.
5) Extract the zip file you downloaded containing the firmware to your desktop or a memorable place on your computer.
6) If you wish to wipe your data and start from scratch, click on the 'PIT' tab and select the .pit file in the extracted folder. Then, click the 'OPTIONS' tab and select 'Re-Partition' and 'NAND Erase All'.
7) Insert the firmware files into Odin. Within Odin, for instance, Click on the 'BL' button, which is where the bootloader file goes. Select the extracted package that has 'BL' at the beginning, and vice versa.
Example:
BL: *directory*/BL_T337AUCU2BOH4...
AP: *directory*/AP_T337AUCU2BOH4...
CP: *directory*/CP_T337AUCU2BOH4...
CSC: *directory*/CSC_ ATT_T337AUCU2BOH4...
8) Once done, verify that you have correctly done all the steps above, click 'Start' in Odin and wait for Odin to output a "PASS" message before unplugging anything.
9) If you wish to flash the firmware, but keep your data, make sure that there is no .pit file in Odin, make sure that 'Re-Partition' and 'NAND Erase All' are unchecked, and make sure that there is no file inserted under the 'CSC' row.
Tutorial (Combo Firmware)
1) Boot your tab into download mode (Shut the device down completely, then hold down the power, volume down, and home button at the same time until a warning message appears)
2) Download and open Odin on your pc
3) Grab the USB charging cable and plug your tab into your pc
4) If Odin does not show your device in the list (It will display an "Added" message if the device is detected) download the Samsung USB Drivers for Mobile Phones and install it to your pc. You may need to/and it is recommended to restart your computer after installing the drivers.
5) Extract the zip file you downloaded containing the firmware to your desktop or a memorable place on your computer.
6) Within Odin, Select 'AP' and browse to the directory where you extracted the firmware, and select the .tar package in the directory. There should be nothing else under the other tabs, only 'AP' should have a firmware package in it.
7) Flashing this package (unless you perform the "Developers Tip" at the end of this thread) will wipe all of your data, so be sure that the proper .pit file that came with the firmware package is selected under the 'PIT' tab in Odin and make sure that 'Re-Partition' and 'NAND Erase All' are checked in Odin to ensure a complete wipe of all personal data on the device. If you perform the developers tip at the end of the thread, simply insert the new package you created under 'AP', make sure there is no .pit file under the PIT slot, and make sure that 'Re-Partition' and 'NAND Erase All' are unchecked in Odin.
8) Once done, verify that everything is set and ready-to-go, then click 'Start' and wait for Odin to output a "PASS" message before unplugging anything.
9) Enjoy!
WARNING: If you are seeing sites that charge you money for the files, DO NOT BUY IT. They are scams and I HIGHLY SUGGEST AVOIDING THESE SITES. I didn't have to buy anything. If you do buy the firmware from these scam sites, and your device becomes bricked or messed up in some way, don't say I didn't warn you.
4 File Firmware Download: https://mega.nz/#!n8Q3VIIS!OComhygeI5SL5R6n0EXEfiYMBtVn_aOAIcUuLgmYs-k
Combo Firmware Download: https://mega.nz/#!69oEwbBR!vBtHQnrdwAfdZB3iPeGb99Yp7W79efTQr7t6FZXrzIo
Odin 3.12 Download: https://mega.nz/#!KsZiHKTb!aEHdQgO7JAQeUwdJWqS0xoR3lyJH4ieJ6qTbVKce8Zk
If the link doesn't work or goes down for some reason or if you were confused by my instructions in any way, please let me know.
Developers Tip: If you want to flash firmware without wiping your data, make sure there is no pit file selected under the PIT tab in Odin, then extract your firmware package (extract everything into a separate folder for combo firmware, extract the CSC package for 4 file downloads) and remove cache.img.ext4 then repack as a .tar file. Applies to both combo and 4 file firmware packages. In 4 file packages, cache.img.ext4 is in the CSC file. However, in some cases this may put your device in a bootloop. If you wish to do this on an older device and the cache file doesn't have the .ext4 extension at the end, don't worry, it'll work the same way.
Now that you have the firmware, WHY NOT ROOT IT? Check out my thread on how to do so here: https://forum.xda-developers.com/tab-4/general/root-how-to-root-sm-t337a-supersu-t3553848
Cheers!
Does anyone know the process for extracting the files like this from an OTA update? I have some files I would like to extract from another OTA. Thank you
Sent from my SAMSUNG-SM-N910A using XDA-Developers Legacy app
dkmac said:
Does anyone know the process for extracting the files like this from an OTA update? I have some files I would like to extract from another OTA. Thank you
Sent from my SAMSUNG-SM-N910A using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'll be honest and say its not easy. Making this firmware took me about 3 months. OTA update files are very different from actual Odin firmware files. If you want to extract the files from an OTA update, I just used 7Zip and went from there.
Lollipop 5.1.1 Root for SM-T337A
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
18Echo said:
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
Click to expand...
Click to collapse
Your welcome bro, happy to help! I have actually rooted my tab with SuperSU, fully working. The only thing is its temporary, and I avoid rebooting or shutting the device down at all because it's a system-less SuperSU (meaning temporary). I'll make a thread on how to achieve root on this tab later tomorrow when I get home from work, unless someone replies to this before I do (It's late where I'm at).
Cheers!
18Echo said:
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
Click to expand...
Click to collapse
Just made a thread for it here: https://forum.xda-developers.com/tab-4/general/root-how-to-root-sm-t337a-supersu-t3553848
Cheers!
Hello! ... First of all, thank you for all your hard work! But unfortunately that firmware does not seem to work for me. I'm a little newbie, so I'd appreciate if someone could explain the steps to follow specifically with Odin, as a tutorial or something ... so that I can distinguish what I'm doing wrong.
I uploaded a short video so you can see what I mean... If you could take the time to watch it and tell me what I'm doing wrong, that would be awesome.
Here it is: youtu.be/9JsLVJ-xHMA (I cannot post direct link since I'm new user)
I've downloaded some files with name ATT_T337AUCU2BOH4_T337AATT2BOH4.zip (1.19gb) put by poorusernamebychoice and their tar.md5 file is gone 404.
Now i need some help here, this zip contains:
AP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
BL_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CSC_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
MILLETLTE_USA_ATT.pit
This is big file so now I'm stuck what to do or i start a fresh download from above links.
Sent from my SAMSUNG-SM-T337A using Tapatalk
darkcrazy75 said:
Hello! ... First of all, thank you for all your hard work! But unfortunately that firmware does not seem to work for me. I'm a little newbie, so I'd appreciate if someone could explain the steps to follow specifically with Odin, as a tutorial or something ... so that I can distinguish what I'm doing wrong.
I uploaded a short video so you can see what I mean... If you could take the time to watch it and tell me what I'm doing wrong, that would be awesome.
Here it is: youtu.be/9JsLVJ-xHMA (I cannot post direct link since I'm new user)
Click to expand...
Click to collapse
Sorry for the late responce, my internet has been down for a while now (2 weeks). I'll watch the video later today and edit this post with an explainatio n.
_SAM11_ said:
I've downloaded some files with name ATT_T337AUCU2BOH4_T337AATT2BOH4.zip (1.19gb) put by poorusernamebychoice and their tar.md5 file is gone 404.
Now i need some help here, this zip contains:
AP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
BL_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CSC_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
MILLETLTE_USA_ATT.pit
This is big file so now I'm stuck what to do or i start a fresh download from above links.
Click to expand...
Click to collapse
Do you mean you need to re-download the files or you need help with flashing them? Dl links are at the middle of the thread.
KingOfTheNet said:
Do you mean you need to re-download the files or you need help with flashing them? Dl links are at the middle of the thread.
Click to expand...
Click to collapse
I hve these files i wrote above. So if they're working, i just need procedure
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
I hve these files i wrote above. So if they're working, i just need procedure
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
It's actually very easy, that's why I didn't put any instructions in the thread, I just assumed people knew how to do it by now. But I'm happy to provide instructions to those people who don't know how. Instead of posting said instructions right here, I'll update the thread with instructions.
Cheers!
KingOfTheNet said:
It's actually very easy, that's why I didn't put any instructions in the thread, I just assumed people knew how to do it by now. But I'm happy to provide instructions to those people who don't know how. Instead of posting said instructions right here, I'll update the thread with instructions.
Cheers!
Click to expand...
Click to collapse
That means alot after my last reply, i had been trying to flash with odin but i dnt kno why tablet isn't connecting laptop while other phones are. Not evn on media mode. So I'm downloading ota update.zip
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
That means alot after my last reply, i had been trying to flash with odin but i dnt kno why tablet isn't connecting laptop while other phones are. Not evn on media mode. So I'm downloading ota update.zip
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
This might take me a while, I can't edit the thread (kinda odd). I've gotta talk to admin about it but I'll try to get instructions up for ya asap (unless someone replies to you with instructions before I do).
Update: I managed updating to 5.1.1 update. Now i just need January update and root the device. I just need January zip update ota if u can manage me getting that please
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
Update: I managed updating to 5.1.1 update. Now i just need January update and root the device. I just need January zip update ota if u can manage me getting that please
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
I believe I have the file stored somewhere on my hard drive, I'll look and pm you a link if I can find it.
Cheers!
KingOfTheNet said:
I believe I have the file stored somewhere on my hard drive, I'll look and pm you a link if I can find it.
Cheers!
Click to expand...
Click to collapse
Sure Thanks for much help
Sent from my SAMSUNG-SM-T337A using Tapatalk
Guys no lollipop update for tab4 t230 ?
tab4map4 said:
Guys no lollipop update for tab4 t230 ?
Click to expand...
Click to collapse
No, this thread is for the Tab 4 8.0 AT&T. Please make sure you consult the relevant forums for your device model as doing anything meant to be done on different devices can be catastrophic.
Cheers!
_SAM11_ said:
Sure Thanks for much help
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
Finally got the instructions up. You can check the very beginning of the thread for instructions on flashing. Just remember, I will not be held responsible if your device is bricked after the matter.
Cheers!