Related
Hello all,
I'v already seen alot of ppl with same problem as i have but didnt find any proper solution yet
I'v by mistake flashed IceColdJelly ROM on my HTC one x rogers, i know its a noobish mistake,
but i've learned to read carfully about what i'm flashing....
I know there is a way to flash the hboot back to a right partition using linux , while device is in emmc mode,
but i dont know which mmcblks it flashed to.
PLs if it possible someone can direct me with the right commands in linux and what files i need to replace.
i'll appreciate any help
Probably should have learned to read carefully before flashing huh...
I don't know the solution but if you actually search you'll find the answer. It's been covered already.
Sent from my HTC One XL using xda premium
we should make a thread in our forum called icecoldjelly with big letters saying not to flash it. noobs might see our thread first instead of the roms thread and end up not flashing it.
Dunno man.. can't really guard against ignorance can ya :banghead:
Sent from my HTC One XL using xda premium
Thank for the supportive reply, but pls answer if you realy wishing to help .
thanks
the way to fix it properly is not for a noob. and no one is going to be able to baby you through it and if someone who has fixed it will do that for you. you need to work your ass to help others fix the same problem.
I really would like to help! I'v tried to work it out for long time and did alot of forum reading, but no success. I do understand that the wrong hboot need to be replaced from linux in some partition... i have some basic linux knwolege...but still dont know hot to see the partitions in emmc mode, and how/what files to dd.
Antowka said:
I really would like to help! I'v tried to work it out for long time and did alot of forum reading, but no success. I do understand that the wrong hboot need to be replaced from linux in some partition... i have some basic linux knwolege...but still dont know hot to see the partitions in emmc mode, and how/what files to dd.
Click to expand...
Click to collapse
absolutelygrim is helping someone else through this http://forum.xda-developers.com/showthread.php?t=1959497&page=2
Crappyvate said:
absolutelygrim is helping someone else through this http://forum.xda-developers.com/showthread.php?t=1959497&page=2
Click to expand...
Click to collapse
Thank!:cyclops:
Antowka said:
Thank!:cyclops:
Click to expand...
Click to collapse
there is a button for that...on the bottom left handside corner
Yeah, don't forget to click thanks on your way out please, these guys deserve it.
WR
Sent from my One X
Antowka said:
Thank!:cyclops:
Click to expand...
Click to collapse
Yea, I'll help you out when I get this other guy's phone fixed. By then I'll have done it already, so It should only take a whole 10 minutes.
Crappyvate said:
there is a button for that...on the bottom left handside corner
Click to expand...
Click to collapse
Yep. found it
absolutelygrim said:
Yea, I'll help you out when I get this other guy's phone fixed. By then I'll have done it already, so It should only take a whole 10 minutes.
Click to expand...
Click to collapse
Appreciate it! Thanks!
how can someone mistakenly flash a rom thats NOT in the AT&T, Rogers HTC One X, Telstra One XL forum
People are googling HTC one x Roms, then get links from onexroot.com and other sites that don't clarify any difference between devices, flash, brick, post a new thread w/o reading:banghead:
Sent from my HTC One XL using Tapatalk 2
Help!
I find that my att hox can't link to the pc, then I mount it with PC, it shows that it have a disk letter but can not be recognized.
I made a big mistake, I format it using the pc...then flash a rom in it.
after that ,I can't turn on it ,and can't get in fastboot.
But when I mount it to my pc, it shows "QHSUSB_dload"
What should I do?
What Rom did you flash?
lucentworld said:
Help!
I find that my att hox can't link to the pc, then I mount it with PC, it shows that it have a disk letter but can not be recognized.
I made a big mistake, I format it using the pc...then flash a rom in it.
after that ,I can't turn on it ,and can't get in fastboot.
But when I mount it to my pc, it shows "QHSUSB_dload"
What should I do?
Click to expand...
Click to collapse
What ROM did you flash? I have a thread on this. Trying to find an unbrick method. Help me out, I got 4 people I am working with. Follow the thread and read my post
http://forum.xda-developers.com/showpost.php?p=33440306&postcount=51
Sounds like a international flash
Sent from my HTC One XL using Tapatalk 2
CheesyNutz said:
Sounds like a international flash
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
I think so ,It was a AOKP ICJ 3.1...I think I made a mistake.
lucentworld said:
I think so ,It was a AOKP ICJ 3.1...I think I made a mistake.
Click to expand...
Click to collapse
@absolutelygrim another one for you :crying:
lucentworld said:
I think so ,It was a AOKP ICJ 3.1...I think I made a mistake.
Click to expand...
Click to collapse
Crappyvate said:
@absolutelygrim another one for you :crying:
Click to expand...
Click to collapse
ICJ (IceColdJelly) is an international ROM. You are bricked (for now)
yep. But I have been talking with yarrimapirate (the guy from the evo s-off thread), beaups and 18th.abn
I think this may get resolved soon
absolutelygrim said:
ICJ (IceColdJelly) is an international ROM. You are bricked (for now)
yep. But I have been talking with yarrimapirate (the guy from the evo s-off thread), beaups and 18th.abn
I think this may get resolved soon
Click to expand...
Click to collapse
Thanks I have seen some method to use linux or ubuntu to unbrick...for one s or v and other android phones.
But I am not familiar with them...I think it is the time for me to learn something...
This is getting ridiculous now
Sent from my HTC One XL using xda premium
IceColdJelly
DvineLord said:
IceColdJelly
Click to expand...
Click to collapse
I'm sorry,but I was a international student and it was a guy in other forum in our country told me that it can be used for all htc one x and xl.
:crying::crying:
you should seriously punch him in his face
DvineLord said:
you should seriously punch him in his face
Click to expand...
Click to collapse
or throw the brick at him....
Crappyvate said:
or throw the brick at him....
Click to expand...
Click to collapse
YAAAAH.
I won't believe guys like him next time.
But now I think I should work hard to unbrick my HOX:silly:
http://unlimited.io./qhsusbdload.htm
This can be used in the case of icj?
lucentworld said:
YAAAAH.
I won't believe guys like him next time.
But now I think I should work hard to unbrick my HOX:silly:
http://bbs.duowan.com/forum.php?mod=forumdisplay&fid=1979&page=1
This can be used in the case of icj?
Click to expand...
Click to collapse
hard work it will be...
Crappyvate said:
hard work it will be...
Click to expand...
Click to collapse
sorry I have a wrong copy
and I fix it now...
I am really an idiot. :crying:
lucentworld said:
sorry I have a wrong copy
I am really an idiot. :crying:
Click to expand...
Click to collapse
that's a taste of what's ahead absolutelygrim has been hard at it http://forum.xda-developers.com/showthread.php?t=1959497
lucentworld said:
YAAAAH.
I won't believe guys like him next time.
But now I think I should work hard to unbrick my HOX:silly:
http://unlimited.io./qhsusbdload.htm
This can be used in the case of icj?
Click to expand...
Click to collapse
Did you even read the thread I linked?
You might be able to use the qhsusb_dload tool from unlimited.io to have the partitions show up.
Please go read the thread. http://forum.xda-developers.com/showthread.php?t=1959497
absolutelygrim said:
Did you even read the thread I linked?
You might be able to use the qhsusb_dload tool from unlimited.io to have the partitions show up.
Please go read the thread. http://forum.xda-developers.com/showthread.php?t=1959497
Click to expand...
Click to collapse
ahaha beat you to it...
Crappyvate said:
ahaha beat you to it...
Click to expand...
Click to collapse
Nice
Hi everyone,
I have upgraded from my 2.3.6 gingerbread to 4.0.4 and I have installed atrix 2 bootloader just to install CWM, but when it required to reboot, I did reboot my atrix 2 and it never been able to load up the phone. I tried to use RSDLite to flash back to 2.3.6 by using this 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf but it said "Unable to retrieve interface handle".
I have no idea how can I get my Atrix 2 to work again, can you all please help over this issue?
Thanks
Somvannda
somvannda said:
Hi everyone,
I have upgraded from my 2.3.6 gingerbread to 4.0.4 and I have installed atrix 2 bootloader just to install CWM, but when it required to reboot, I did reboot my atrix 2 and it never been able to load up the phone. I tried to use RSDLite to flash back to 2.3.6 by using this 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf but it said "Unable to retrieve interface handle".
I have no idea how can I get my Atrix 2 to work again, can you all please help over this issue?
Thanks
Somvannda
Click to expand...
Click to collapse
Okay so basically you need to flash it back to the 4.0.4 with the fastboot file for 4.0.4 and rsd 6.
Fastboot 4.0.4 file
http://forum.xda-developers.com/showthread.php?t=1961310
RSDlite 6.0
https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
This is the dev. section, only development post belong here. You should ask in the Q&A section. You're flashing all the wrong things and are working towards a brick. Check the noob thread, it has all the answers you need.
41rw4lk said:
This is the dev. section, only development post belong here. You should ask in the Q&A section. You're flashing all the wrong things and are working towards a brick. Check the noob thread, it has all the answers you need.
Click to expand...
Click to collapse
Agreed.
dont blame me, as you have seen, i have been a member here since OCT 2008 and I haven't post a single post. Im sorry for that!
No problem
Moving to Q&A. Redirect for a few days.
MD
Well I have followed the instruction well, but it seemed stuck in 14/19 of transferring system.img until my battery ran out off. Any idea about this??
How charged was it when you started it?
Sent from my MB865 using xda app-developers app
i charged it fully by an extended recharger. but at the stage of 14/19 it never finished... it keep saying processing.. for more than 2 hours
somvannda said:
i charged it fully by an extended recharger. but at the stage of 14/19 it never finished... it keep saying processing.. for more than 2 hours
Click to expand...
Click to collapse
Oh wow. I have no idea what could be the problem then:/
what can i do??? or it is broken????
somvannda said:
what can i do??? or it is broken????
Click to expand...
Click to collapse
Well I cant say that it is broken. But something is defiantly messed up on it. Did you take a look at this tread yet?
http://forum.xda-developers.com/showthread.php?t=1937112
somvannda said:
what can i do??? or it is broken????
Click to expand...
Click to collapse
Are you flashing the right firmware for your phone? You have an AT&T one?
And that first sbf file you tried to install is for the original Atrix. You have an MB/ME865 phone?
Sent from my phone's mind
I am not using AT&T one. And yeah I have MB/ME865 one..
somvannda said:
I am not using AT&T one. And yeah I have MB/ME865 one..
Click to expand...
Click to collapse
That's your problem. Maybe you can find yours here instead: http://forum.xda-developers.com/showthread.php?t=1934874
Sent from my phone's mind
I knew I was forgetting something I didn't know it was that important you sir get a thanks
Sent from my MB865 using xda app-developers app
i downloaded the firmware of retailer of asia.. as i am in Cambodia.. but nothing is work... and i was wondering of "Requires Moto Android (De)packer 1.4 to edit.
". Is there anything to do with this one?? because I also failed in Fastboot with the original firmware as well...
Any idea????
finally, i got my phone hard bricked ((((((((((((((((((((((((((((((((((((((((((((((((((((((
somvannda said:
finally, i got my phone hard bricked ((((((((((((((((((((((((((((((((((((((((((((((((((((((
Click to expand...
Click to collapse
Wow my condolences..how did u manage to do it??
Sent from my MB865 using xda app-developers app
i flashed with a 2.3.5 and it stuck at bootloader
Ok, so I tried flashing cyanogenmod on my phone and ended up with what i believe to be a hard brick... I'll go through what I did, and I guess if there is any way to reverse this and return it to working condition, I would greatly appreciate this information. First, I used the exploit found in the all-in-one kit so that the bootloader could be unlocked officially by HTC. After getting my bootloader unlocked via the file sent to me by HTC, I flashed my cwm via fastboot. Everything seemed to be working fine at this point; the phone would boot into both the rom and the cwm. I rebooted the phone and flashed the boot image found in the cm rom I was flashing on my phone. I rebooted once again, erased the cache and dalvik, and then attempted to flash the rom. It was unsuccessful the first time due to failed asserts. I had previously been able to simply edit the build.prop file and remove the asserts on other android devices to correct this problem, so I attempted to do this. I tried again to flash the rom, which began installing, and then resulted in the phone turning off. I am sure that this has everything to do with my editing of the file, but I am just wondering why it did not work this time, and if there is a way to correct this without expensive hardware. Any feedback is greatly appreciated.
tsanto2 said:
Ok, so I tried flashing cyanogenmod on my phone and ended up with what i believe to be a hard brick... I'll go through what I did, and I guess if there is any way to reverse this and return it to working condition, I would greatly appreciate this information. First, I used the exploit found in the all-in-one kit so that the bootloader could be unlocked officially by HTC. After getting my bootloader unlocked via the file sent to me by HTC, I flashed my cwm via fastboot. Everything seemed to be working fine at this point; the phone would boot into both the rom and the cwm. I rebooted the phone and flashed the boot image found in the cm rom I was flashing on my phone. I rebooted once again, erased the cache and dalvik, and then attempted to flash the rom. It was unsuccessful the first time due to failed asserts. I had previously been able to simply edit the build.prop file and remove the asserts on other android devices to correct this problem, so I attempted to do this. I tried again to flash the rom, which began installing, and then resulted in the phone turning off. I am sure that this has everything to do with my editing of the file, but I am just wondering why it did not work this time, and if there is a way to correct this without expensive hardware. Any feedback is greatly appreciated.
Click to expand...
Click to collapse
What happens now when you boot it up? Can you get into cwm?
dubbz82 said:
What happens now when you boot it up? Can you get into cwm?
Click to expand...
Click to collapse
It's not responsive to anything now... I realize the device probably won't make a recovery at this point due to my lack of knowledge and resources, but I guess I'm more wondering why exactly this happened, for future reference. I mean, if there is a way to fix it that would be awesome, but yeah, the screen and buttons wont turn on, and when its plugged in the charge LED does not come on either. My computer can still recognize the phone though in the device manager, but it is called Qualcomm hs-usb qdloader 9008, and there is not an obvious way (to me) to access the files on the internal SD.
tsanto2 said:
Ok, so I tried flashing cyanogenmod on my phone and ended up with what i believe to be a hard brick... I'll go through what I did, and I guess if there is any way to reverse this and return it to working condition, I would greatly appreciate this information. First, I used the exploit found in the all-in-one kit so that the bootloader could be unlocked officially by HTC. After getting my bootloader unlocked via the file sent to me by HTC, I flashed my cwm via fastboot. Everything seemed to be working fine at this point; the phone would boot into both the rom and the cwm. I rebooted the phone and flashed the boot image found in the cm rom I was flashing on my phone. I rebooted once again, erased the cache and dalvik, and then attempted to flash the rom. It was unsuccessful the first time due to failed asserts. I had previously been able to simply edit the build.prop file and remove the asserts on other android devices to correct this problem, so I attempted to do this. I tried again to flash the rom, which began installing, and then resulted in the phone turning off. I am sure that this has everything to do with my editing of the file, but I am just wondering why it did not work this time, and if there is a way to correct this without expensive hardware. Any feedback is greatly appreciated.
Click to expand...
Click to collapse
It was probably a corrupted download and editing files on a Rom built by someone else wasn't the best of ideas can you access fastboot or recovery?
Sent from my HTC One XL using xda premium
31ken31 said:
It was probably a corrupted download and editing files on a Rom built by someone else wasn't the best of ideas can you access fastboot or recovery?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
I downloaded the latest, most stable rom directly from the cyanogenmod website, and no, I can't access fastboot or recovery.
tsanto2 said:
I downloaded the latest, most stable rom directly from the cyanogenmod website, and no, I can't access fastboot or recovery.
Click to expand...
Click to collapse
When you plug it in does it show charge light? And what is the file name you flashed? You should only download roms from here if it was a quad core Rom it overwrote the partitions and totally bricked it. Also plug it into a Windows pc and tell me what it's trying to install drivers for if it tries to install qhsusb drivers your dead in the water and need jtag or send it to HTC for about 200$ to have mainboard replaced.
Sent from my HTC One XL using xda premium
I offer free JTAG to users with a 300 post count or who are vouched for by a senior members
In this case I would help out only asking that you please give something back to the community
If its a onexl Qualcomm chip I can service the unit
Sent from my SCH-R970 using xda premium
31ken31 said:
When you plug it in does it show charge light? And what is the file name you flashed? You should only download roms from here if it was a quad core Rom it overwrote the partitions and totally bricked it. Also plug it into a Windows pc and tell me what it's trying to install drivers for if it tries to install qhsusb drivers your dead in the water and need jtag or send it to HTC for about 200$ to have mainboard replaced.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
As I said, the charge light does not show up, the file name was cm-10.1.2-endeavoru, and I don't remember seeing any drivers installed after that, but on my windows 8 pc (dont judge, its brand new), it shows up in device manager as qualcomm hs-usb qloader... Sounds pretty dismal, but thanks a lot for the input. Still wondering why this happened though.
Zarboz said:
I offer free JTAG to users with a 300 post count or who are vouched for by a senior members
In this case I would help out only asking that you please give something back to the community
If its a onexl Qualcomm chip I can service the unit
Sent from my SCH-R970 using xda premium
Click to expand...
Click to collapse
Now that's great to know and I can't speak for everyone but thanks a million.
:beer:
Sent from my HTC One XL using xda premium
Zarboz said:
I offer free JTAG to users with a 300 post count or who are vouched for by a senior members
In this case I would help out only asking that you please give something back to the community
If its a onexl Qualcomm chip I can service the unit
Sent from my SCH-R970 using xda premium
Click to expand...
Click to collapse
That is an extremely generous offer, however, I have the One X and I may be wrong, but I don't think that would work, would it?
How to root mito a222 product my country bro..using mtk6575
Sent from my R800i using XDA Premium HD app
tsanto2 said:
That is an extremely generous offer, however, I have the One X and I may be wrong, but I don't think that would work, would it?
Click to expand...
Click to collapse
This forum is for the evita. If you have the quad core and flash an evita Rom it bricks and vice versa. They are not cross compatable. Flash evita on international version u brick it. If you have the quad core you may be better off asking in the correct forum. I'll find you a link in a minute and update this post
http://forum.xda-developers.com/forumdisplay.php?f=1548
If it's quad core go there
Sent from my HTC One XL using xda premium
31ken31 said:
This forum is for the evita. If you have the quad core and flash an evita Rom it bricks and vice versa. They are not cross compatable. Flash evita on international version u brick it. If you have the quad core you may be better off asking in the correct forum. I'll find you a link in a minute and update this post
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Before I downloaded the rom, I checked and make sure I had a dual-core processor in the about section of the settings in the phone.
tsanto2 said:
As I said, the charge light does not show up, the file name was cm-10.1.2-endeavoru, and I don't remember seeing any drivers installed after that, but on my windows 8 pc (dont judge, its brand new), it shows up in device manager as qualcomm hs-usb qloader... Sounds pretty dismal, but thanks a lot for the input. Still wondering why this happened though.
Click to expand...
Click to collapse
Well cm10.1.2-endeavour is for quad core so your bricked. You flashed the quad core Rom.
Sent from my HTC One XL using xda premium
31ken31 said:
Well cm10.1.2-endeavour is for quad core so your bricked. You flashed the quad core Rom.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Ahh, well there it is. Thanks for the info. I'm an idiot haha
tsanto2 said:
Ahh, well there it is. Thanks for the info. I'm an idiot haha
Click to expand...
Click to collapse
Not a idiot. Just keep in mind the two devices are not well separated on the websites. All available roms for our phone are here on xda. Dont even assume cm website will be that specific. I'd pm zarboz and see if he is willing to jtag for you. And it wouldnt hurt if you threw him a few bucks for beer or something lol
Sent from my HTC One XL using xda premium
tsanto2 said:
Ahh, well there it is. Thanks for the info. I'm an idiot haha
Click to expand...
Click to collapse
There were asserts in the ROM to prevent this kind of thing.
lauterm said:
There were asserts in the ROM to prevent this kind of thing.
Click to expand...
Click to collapse
Think he removed em lol
Sent from my HTC One XL using xda premium
31ken31 said:
Think he removed em lol
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Yup, I did. I had done that in the past and it worked for my other android device, but I guess it wouldn't make sense for them to exist if there wasn't a reason. Thanks alot guys, I'm just starting out with this stuff and it's really good to see the amount of people who are willing to help newbies like me.
tsanto2 said:
Yup, I did. I had done that in the past and it worked for my other android device, but I guess it wouldn't make sense for them to exist if there wasn't a reason. Thanks alot guys, I'm just starting out with this stuff and it's really good to see the amount of people who are willing to help newbies like me.
Click to expand...
Click to collapse
No problem man good luck with it.
Sent from my HTC One XL using xda premium
Like the title said. My got bricked. I can't access to QHSUSB_DLOAD npr detect by PC and all of you said HTC can fix a brick. So how can I say that to them?
CM11 Powered G-Wonder
TiTAN-O-One said:
Like the title said. My got bricked. I can't access to QHSUSB_DLOAD npr detect by PC and all of you said HTC can fix a brick. So how can I say that to them?
CM11 Powered G-Wonder
Click to expand...
Click to collapse
If you're willing to fix the brick by yourself, there's a thread within this forum where its a tutorial to fix a brick. Hopefully this helps!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
YoungDev said:
If you're willing to fix the brick by yourself, there's a thread within this forum where its a tutorial to fix a brick. Hopefully this helps!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Link please ? I can't find it.
CM11 Powered G-Wonder
TiTAN-O-One said:
Link please ? I can't find it.
CM11 Powered G-Wonder
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1963688
[TUT] Unbrick Your HTC One S [TUT]
Hopefully this link helps.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
TiTAN-O-One said:
Like the title said. My got bricked. I can't access to QHSUSB_DLOAD npr detect by PC and all of you said HTC can fix a brick. So how can I say that to them?
CM11 Powered G-Wonder
Click to expand...
Click to collapse
????
http://forum.xda-developers.com/showthread.php?t=2116062
It seeems thats all the threads mentioned are inactive. Nobody replied not even Tecardo
CM11 Powered G-Wonder
TiTAN-O-One said:
It seeems thats all the threads mentioned are inactive. Nobody replied not even Tecardo
CM11 Powered G-Wonder
Click to expand...
Click to collapse
What about this?
http://unlimited.io/qhsusbdload.htm
808phone said:
What about this?
http://unlimited.io/qhsusbdload.htm
Click to expand...
Click to collapse
That will mess up the phone I have tried it before just say you took the update while your phone was fully charged and it wouldn't turn back on that's how I got a new one
Sent From my Evo 3D with the dark Lords kernel
Flashalot said:
That will mess up the phone I have tried it before just say you took the update while your phone was fully charged and it wouldn't turn back on that's how I got a new one
Sent From my Evo 3D with the dark Lords kernel
Click to expand...
Click to collapse
But what if I have no warranty left? I mean, I tried telling HTC and they told me to replace the mainboard for a HTC One X price. Outrageous.
Sent from my S800 China Phone