I feel that everything in the stock rom is unnecessarily big. I tried changing the resolution but it made my hardware navigation keys useless.
changing the dpi solved that problem.
i wanted to know know the difference between the two. And also suggestion on which one should i prefer changing.
p.s. isn't dpi a hardware thing? how can an app change that?
thanks in advance.
just change your dpi
ab014 said:
I feel that everything in the stock rom is unnecessarily big. I tried changing the resolution but it madyo hardware navigation keys useless.
changing the dpi solved that problem.
i wanted to know know the difference between the two. And also suggestion on which one should i prefer changing.
p.s. isn't dpi a hardware thing? how can an app change that?
thanks in advance.
Click to expand...
Click to collapse
Use this app called Dpi changer that's available in the playstore.. Change it to 180 or 190 and reboot your phone.. The higher the value the bigger your icons will be.. Easy! :good:
Related
It annoys me to only have one notification icon visible in portrait mode, especially since I'm running the 7p in 140DPI mode and have plenty of space there for more icons. Does anyone know how to increase the amount of icons on the status bar?
I run mine at 130 and it seemed to be able to accommodate 4 icons (including that stupid zoom/stretch icon).
rendler said:
I run mine at 130 and it seemed to be able to accommodate 4 icons (including that stupid zoom/stretch icon).
Click to expand...
Click to collapse
Is that in portrait mode? And they actually display, not just that there seems to be room enough?
EDIT: set mine to that too and now I get multiple...weird
What do you use to set the dpi?
ALso, wouldnt this make everything else looks weird? I.e. Go Launcher, widgets, etc.
DPI changer or what it's called. Doesnt make anything look weird, just makes icons and such smaller. Gives you more room for "content".
Tried 130DPI, but changed back to 140. Don't like the added stuff ADW displays at that DPI,
What is the stock dpi? Just rooted and changed the dpi but can't remember what the default was. 160?
Sent from my GT-P6210 using xda premium
yup... its 160
edan1979 said:
yup... its 160
Click to expand...
Click to collapse
Thanks.
Sent from my GT-P6210 using xda premium
Hmm, downloaded DPI Changer and when run, it said it "...unable to read configuration file..."
I am rooted and SU show it allows DPI Changer.
wait a minute there...
won't a lower dpi than the default 160 display stuff bigger on the screen and thus have less room for icons and stuff. so, how did u get more notification icons with lower dpi?
fasacosta said:
won't a lower dpi than the default 160 display stuff bigger on the screen and thus have less room for icons and stuff. so, how did u get more notification icons with lower dpi?
Click to expand...
Click to collapse
No, but I understand why you would think that. Android decides interface element sizes based on screen size, not resolution, since a finger needs the same physically sized button no matter what resolution it's displayed at. The OS is unaware of the screen size, but is aware of its own resolution and DPI. The screen size is then given by those two numbers. If you lower the DPI the OS then thinks it has a bigger screen on its hands because the same resolution with a lower DPI than before must imply a larger screen, so it changes the layout based on that
I am trying to change the DPI with:
adb shell wm density 300
the above works correctly. but anything lower, the screen continuously flickers and is unusable.
for example, can't get the following to work:
adb shell wm density 200
any suggestions?
once we get root, this becomes very easy!!! thanks.
why would someone change the density from 480 (stock set in build.prop) to 200? i think its too low density,that all icons and text will be too small.
200 may be too low, but i like to see more contents on the screen. may be 300 is optimal.
Do you have any luck with this? When I change to 320 the navbar is blank in landscape.
ok, i am able to change the lcd density to 360 without issues.
anything less than 300 (say 280), the screen keeps flickering and it is unusable. don't know why.
deepasadish said:
ok, i am able to change the lcd density to 360 without issues.
anything less than 300 (say 280), the screen keeps flickering and it is unusable. don't know why.
Click to expand...
Click to collapse
maybe, because it too low?
DallasCZ said:
maybe, because it too low?
Click to expand...
Click to collapse
Lol. With my nexus 4 I was able to go up to 160 IIRC.
deepasadish said:
Lol. With my nexus 4 I was able to go up to 160 IIRC.
Click to expand...
Click to collapse
I dont know what is IIRc, but the DPI of nexus 4 is 318 so going to 160 is 50%.
Idol3 has 403 so 200 is below 50% (anyway in build.prom is dPI set to 480 ). I think its too low res and the system is nod made for such low res. It simly dont know how to handle it.
Just my opinion.
DallasCZ said:
I dont know what is IIRc, but the DPI of nexus 4 is 318 so going to 160 is 50%.
Idol3 has 403 so 200 is below 50% (anyway in build.prom is dPI set to 480 ). I think its too low res and the system is nod made for such low res. It simly dont know how to handle it.
Just my opinion.
Click to expand...
Click to collapse
you may be right. i am hoping with CM ROM (and good kernel) it may go all the way. for now i am satisfied with 340.
btw, chrome just doesn't go into tablet UI even at 300.
ps. IIRC - if i recall correctly. thanks.
deepasadish said:
you may be right. i am hoping with CM ROM (and good kernel) it may go all the way. for now i am satisfied with 340.
btw, chrome just doesn't go into tablet UI even at 300.
ps. IIRC - if i recall correctly. thanks.
Click to expand...
Click to collapse
how does look the syste mlike in 340DPI? it must be unreadable
deepasadish said:
I am trying to change the DPI with:
adb shell wm density 300
the above works correctly. but anything lower, the screen continuously flickers and is unusable.
for example, can't get the following to work:
adb shell wm density 200
any suggestions?
once we get root, this becomes very easy!!! thanks.
Click to expand...
Click to collapse
I totally forgot about this command to change DPI! I am so glad you posted this. I was about to root my phone just so I could change DPI. I hate big icons and text. I will end up rooting anyway but this way I don't have to eff with the build.prop as some people have said causes issues with this phone. I set mine to 360 which is perfect... Nova launcher will help me optimize from there
Thanks
DallasCZ said:
how does look the syste mlike in 340DPI? it must be unreadable
Click to expand...
Click to collapse
not really. just try it out - you have nothing to lose and you can easily revert back.
once you get used to the increased screen real estate, you will never go back.
sort of reminds me when I went from 1024x768 to 1280x1024 resolution on some monitor some 15+ years ago.
I experimented at 360 and 400. Both looked good. No strange behavior in the short time I used each of them. I'm not sure what I'll do. I liked 400 a little better than 360. But I might live with the stock 480, too, even though for some things, I preferred the lower dpi. It is like going to higher resolution on a computer monitor and this screen is big enough to benefit.
ROM Toolbox is good for these kinds of edits, though direct editing of build.props is easy enough. Make a backup of that file before you edit it.
Navbar in Landscape
deepasadish said:
you may be right. i am hoping with CM ROM (and good kernel) it may go all the way. for now i am satisfied with 340.
btw, chrome just doesn't go into tablet UI even at 300.
ps. IIRC - if i recall correctly. thanks.
Click to expand...
Click to collapse
Does your navbar work properly in landscape at 340? Mine won't work at 320, it's blank.
dbjungle said:
Does your navbar work properly in landscape at 340? Mine won't work at 320, it's blank.
Click to expand...
Click to collapse
yes, works at 340.
maigre said:
I experimented at 360 and 400. Both looked good. No strange behavior in the short time I used each of them. I'm not sure what I'll do. I liked 400 a little better than 360. But I might live with the stock 480, too, even though for some things, I preferred the lower dpi. It is like going to higher resolution on a computer monitor and this screen is big enough to benefit.
ROM Toolbox is good for these kinds of edits, though direct editing of build.props is easy enough. Make a backup of that file before you edit it.
Click to expand...
Click to collapse
Once xposed framework is working on the Alcatel Idol 3 you can use the "app settings" module to allow per app dpi settings.
my phone currently have 240 dpi as default.. btw here is the specs https://pinoyscreencast.net/item/cherry-mobile-omega-lite-2/
so i wanna know if i can change it to 180 or 160 dpi and what will improve to my phone after lowering it.. thanks..
balot.ko said:
my phone currently have 240 dpi as default.. btw here is the specs https://pinoyscreencast.net/item/cherry-mobile-omega-lite-2/
so i wanna know if i can change it to 180 or 160 dpi and what will improve to my phone after lowering it.. thanks..
Click to expand...
Click to collapse
it only makes things smaller on a screen. So, you can fit more stuff on a screen.
Ashwinrg said:
it only makes things smaller on a screen. So, you can fit more stuff on a screen.
Click to expand...
Click to collapse
one more question, will it reduce the quality of my camera like when taking pics and recording vids?
balot.ko said:
one more question, will it reduce the quality of my camera like when taking pics and recording vids?
Click to expand...
Click to collapse
I don't think it will affect on camera or recording because it only related to display.
If you are trying to change screen dpi with build prop editing then it having a chances of bricking your device if anything goes wrong.
Instead of use "app settings" app to change dpi per app basis. But it requires xposed framework installed to be work.
Oh I have the same DPI and I lowered it to 180 easily... It won't affect the quality of anything and won't ruin anything..
You'll feel weird at the beginning then you're gonna get used to it
Just get a Root Browser then go to /system/build.prop then search for " ro.sf.lcd_density=240" and change the number to 180, save then reboot
Sent from the beige bra section at Target.
Hiis someone using tidal music app on his Android head unit?
I can install it and login but then it shows nothing except the play button
Yeahmään said:
Hiis someone using tidal music app on his Android head unit?
I can install it and login but then it shows nothing except the play button
Click to expand...
Click to collapse
That app isn't well optimised for tablets with the screen size that our head units have. You'll have to lower the dpi to use it. To do this, you'll need root.
I would recommend flashing Malaysk or Hal9k rom and then using any dpi changer app on play store.
How much the dpi needs to be lowered depends on your screen size and resolution. I can't help you there, you'll have to lower it and try again till it works.
Thank you that worked. Changed to 160 dpi and 1280x720
Yeahmään said:
Thank you that worked. Changed to 160 dpi and 1280x720
Click to expand...
Click to collapse
Could you reveal which dpi changing method you used? Tried from developer options, but can't go any lower than 320 dpi.
Langthjem said:
Could you reveal which dpi changing method you used? Tried from developer options, but can't go any lower than 320 dpi.
Click to expand...
Click to collapse
I think there's an app called easy dpi changer or something similar on the play store
Langthjem said:
Could you reveal which dpi changing method you used? Tried from developer options, but can't go any lower than 320 dpi.
Click to expand...
Click to collapse
Yes I used easy dpi changer with root
after dpi change, all other apps and home screen looks same? no small/huge text?
Thanks a lot for this
I have the same problem on my PQ8046BL screen size 1280 x 480, not sure what size to change it to dpi .
Does this app still have the same problem?
albertron said:
Does this app still have the same problem?
Click to expand...
Click to collapse
Yes, it does
The default DPI is 560, the screen is 516, i like the 516 dpi setting better, but the lockscreen fingerprint gets out of place, anyone has an idea to fix this behavior?
thanks
xhitm3n said:
The default DPI is 560, the screen is 516, i like the 516 dpi setting better, but the lockscreen fingerprint gets out of place, anyone has an idea to fix this behavior?
thanks
Click to expand...
Click to collapse
Try this? I like how IT looks..
First one says standard and second one says small ..
*Attached a preview*
mikkis2k said:
Try this? I like how IT looks..
First one says standard and second one says small ..
*Attached a preview*
Click to expand...
Click to collapse
the small gives 490DPI, i think its to small, 516 is the sweet spot for me, but locksreen gets broken, you have to change in terminal
Code:
wm density
Phone app is so huge, how to change dpi of only this app?