hi,i got an orange samsung galaxy s2 gt-i9100p recently,it needed a network unlock code in order for me to use non-orange sim cards.i was told by a friend to try flashing it which i did. now anytime it reboot/powers on it loads the android system recovery 3e mode. pls i dont know what else to do again.
temi_o said:
hi,i got an orange samsung galaxy s2 gt-i9100p recently,it needed a network unlock code in order for me to use non-orange sim cards.i was told by a friend to try flashing it which i did. now anytime it reboot/powers on it loads the android system recovery 3e mode. pls i dont know what else to do again.
Click to expand...
Click to collapse
sounds like a bad flash, are you able to get into download mode? i would recommend if your able to get into download mode, you should download your firmware from here http://www.sammobile.com/firmwares/2/ make sure its your GT-I9100P model only, download odin and flash that zip you get from sammobile. make sure re-partition is unchecked, normally it is but be careful. if you get stuck please be sure to reply back.
Trozzul said:
sounds like a bad flash, are you able to get into download mode? i would recommend if your able to get into download mode, you should download your firmware from here make sure its your GT-I9100P model only, download odin and flash that zip you get from sammobile. make sure re-partition is unchecked, normally it is but be careful. if you get stuck please be sure to reply back.
Click to expand...
Click to collapse
thanks for your reply,went to the site u mentioned,sadly its only the model number i know at the moment,cant access the phone for the others..is there any way else? pls!!
temi_o said:
thanks for your reply,went to the site u mentioned,sadly its only the model number i know at the moment,cant access the phone for the others..is there any way else? pls!!
Click to expand...
Click to collapse
if your sure its a GT-I9100P go ahead and download the stock rom from sammobile.
Trozzul said:
if your sure its a GT-I9100P go ahead and download the stock rom from sammobile.
Click to expand...
Click to collapse
thank you again for replying,im sure it the right model number,the problem ive now faced is sammobile is saying they dont have the firmware
temi_o said:
thank you again for replying,im sure it the right model number,the problem ive now faced is sammobile is saying they dont have the firmware
Click to expand...
Click to collapse
Sammobile does have the firmware,i saw it myself, its a little tricky you have to go down about half way of the page to the checker and look through the long list of models, not entering your model number. from there choose your country, im guessing orange is Canada or the UK? France as-well has it.
Trozzul said:
Sammobile does have the firmware,i saw it myself, its a little tricky you have to go down about half way of the page to the checker and look through the long list of models, not entering your model number. from there choose your country, im guessing orange is Canada or the UK? France as-well has it.
Click to expand...
Click to collapse
thanks alot mate,downloading it at the moment,its the uk,will give u a feedback
temi_o said:
thanks alot mate,downloading it at the moment,its the uk,will give u a feedback
Click to expand...
Click to collapse
cool hope all goes well! remember, its a simple and easy task, make sure you have samsung usb drivers installed, download odin (from that download page there should be a download for odin) plug in your device, when one of the little boxs towards the top right is green, hit pda and click start, make sure re-partition is not checked and wait about around 5-10min and your device should be back to samsungs stock 4.1.2 build for the device.
Trozzul said:
cool hope all goes well! remember, its a simple and easy task, make sure you have samsung usb drivers installed, download odin (from that download page there should be a download for odin) plug in your device, when one of the little boxs towards the top right is green, hit pda and click start, make sure re-partition is not checked and wait about around 5-10min and your device should be back to samsungs stock 4.1.2 build for the device.
Click to expand...
Click to collapse
thanks mate,the phone is back up and running though its still asking for "network unlock code". at this point i will prefer to give it to an expert and observe what he does.....or can u assist me on that too
temi_o said:
thanks mate,the phone is back up and running though its still asking for "network unlock code". at this point i will prefer to give it to an expert and observe what he does.....or can u assist me on that too
Click to expand...
Click to collapse
im not the best with "other networks" such as orange but you can try this here http://forum.xda-developers.com/gal...lock-1-02-jb-compatible-t1846451/post30541172 re-root your device and install busybox from the playstore and use this guide.
Trozzul said:
im not the best with "other networks" such as orange but you can try this here http://forum.xda-developers.com/gal...lock-1-02-jb-compatible-t1846451/post30541172 re-root your device and install busybox from the playstore and use this guide.
Click to expand...
Click to collapse
thanks again.....i followed the link you mentioned and got the app from the play store,but its telling me(the app) my phone needs to be rooted.is there a way you can put me through rooting my exact phone model.thank you
temi_o said:
thanks again.....i followed the link you mentioned and got the app from the play store,but its telling me(the app) my phone needs to be rooted.is there a way you can put me through rooting my exact phone model.thank you
Click to expand...
Click to collapse
people say ZergRush here roots your model.
Trozzul said:
people say ZergRush here roots your model.
Click to expand...
Click to collapse
thanks mate,i've been able to unlock the phone. cheers:good:
Related
i flashed SCH-I500_USCC_DI14_REL.tar.md5。When I use odin Installation cmw ，the phone stopped at the samsung splash screen does not work. How can I do?
qq25 said:
i flashed SCH-I500_USCC_DI14_REL.tar.md5。When I use odin Installation cmw ，the phone stopped at the samsung splash screen does not work. How can I do?
Click to expand...
Click to collapse
You also need to flash the pit file. If you follow the instructions in this thread, it will tell you exactly what to do. You don't use Odin to install CWM, btw.
Phidelt82 is correct.
Start with that thread. That will get you back to stock.
Then this thread. How to Mod My MEZ. That will get you started from Stock to get Rooted and install CWM and then its your choice of ROM and Theme if you choose.
please please please.. read. read and read everything twice. go slow and have patience.
And ask questions. I do not get a chance to post so much at the moment but always willing to help where I can if I can.
now my phone can not to work。I press step by step, and now my phone finish except call 911, any other phone cannot dial, what reason be?
Need to activate？How should do?
qq25 said:
Need to activate？How should do?
Click to expand...
Click to collapse
Just cool down. Your phone is booting. It works. I don't work for USCC so I'm not exactly sure how it works but I don't know if you would have to activate it again. I suggest you take the phone to the store and tell them it stopped working. They will probably get it all fixed up for you there. Since it's stock right now you shouldn't have any problems (=
PS: In the future, don't dial 911 to 'test' whether you phone works or not.. 0_o
dcow90 said:
Just cool down. Your phone is booting. It works. I don't work for USCC so I'm not exactly sure how it works but I don't know if you would have to activate it again. I suggest you take the phone to the store and tell them it stopped working. They will probably get it all fixed up for you there. Since it's stock right now you shouldn't have any problems (=
PS: In the future, don't dial 911 to 'test' whether you phone works or not.. 0_o
Click to expand...
Click to collapse
thanks ,i use this phone in china ^_^ 。
qq25 said:
thanks ,i use this phone in china ^_^ 。
Click to expand...
Click to collapse
Why would you be using a US Cellular phone in China?
phidelt82 said:
You also need to flash the pit file. If you follow the instructions in this thread, it will tell you exactly what to do. You don't use Odin to install CWM, btw.
Click to expand...
Click to collapse
Woah, what do you mean you don't use Odin to install CWM? The newb guide
http://forum.xda-developers.com/showthread.php?t=931169
says "
1.Shut phone off, pull battery out and leave it out.
2.Run odin (assuming you have it installed)
3.Load the cwm-recovery-all.tar file into the PDA spot"
And i've read like 15 other how tos that all say the same thing. That sounds like you install CWM with odin.
I'm a noob but I'd been trying my best understanding to ROOT T959W, I'd followed the steps as described in one of the forums here using odin 1.7 and stock+Voodoo-T959VKJ1.tar and the update in sdcard but unfortunately I don't understand, no matter what i do, when the phone turns on it shows the Recovery mode, I'm however able to boot into the downlod mode and my phone is detectable.
The phone was I guess bricked onetime but i'd used oneclick unbrick and it went back fine.
Please help me to at least get it to a running state not necessarily root.
I don't know if this is right, what should i do next ? Flash the rom CM9 ? or have i messed up ? :S
THANKS A TON!
Attached is a preview.
It seems a little odd. Did you clear everything and not flash a rom?
Sent from my SGH-T999 using xda premium
So you have the "W" phone from Wind and you flashed the bootloader? I can clearly see the Tmobile logo, which shouldn't be on a Wind phone. Just hold on, don't flash anything else and give a few, I'm working with bhundven at this very moment to try and dump my bootloader. Your phone still turns on, there is hope but the more you start clicking all over, etc the more damage you can do, so please wait.
getochkn said:
So you have the "W" phone from Wind and you flashed the bootloader? I can clearly see the Tmobile logo, which shouldn't be on a Wind phone. Just hold on, don't flash anything else and give a few, I'm working with bhundven at this very moment to try and dump my bootloader. Your phone still turns on, there is hope but the more you start clicking all over, etc the more damage you can do, so please wait.
Click to expand...
Click to collapse
Sure, I will be waiting, Yes it shows the Tmobile logo and when I connect it to Odinv1.85 it tells me this phone is T959V but infact its a wind mobile.
I'll be waiting for you guys and will be more than willing to donate.
cheers!
zaryan said:
Sure, I will be waiting, Yes it shows the Tmobile logo and when I connect it to Odinv1.85 it tells me this phone is T959V but infact its a wind mobile.
I'll be waiting for you guys and will be more than willing to donate.
cheers!
Click to expand...
Click to collapse
The T959V in odin is just a label in the ini file in the same directory.
You can change that to say anything you want.
I really recommend taking the time now to remove odin, and it's drivers, and install heimdall.
Look around in the wiki for help on that one.
bhundven said:
The T959V in odin is just a label in the ini file in the same directory.
You can change that to say anything you want.
I really recommend taking the time now to remove odin, and it's drivers, and install heimdall.
Look around in the wiki for help on that one.
Click to expand...
Click to collapse
After i replaced the drivers, and ran flash in heimdall, it gives me an error - I ran T959VUVKJ6_STOCK-UVKJ6-One-Click.jar
"Local and device PIT files don't match and repartition wasn't specified
Ending session...
Rebooting device "
zaryan said:
After i replaced the drivers, and ran flash in heimdall, it gives me an error - I ran T959VUVKJ6_STOCK-UVKJ6-One-Click.jar
"Local and device PIT files don't match and repartition wasn't specified
Ending session...
Rebooting device "
Click to expand...
Click to collapse
I didn't say to run it, yet. I'm making a new oneclick for t959w. Hang tight.
bhundven said:
I didn't say to run it, yet. I'm making a new oneclick for t959w. Hang tight.
Click to expand...
Click to collapse
Sure will be waiting
zaryan said:
Sure will be waiting
Click to expand...
Click to collapse
Me and Brian are working on it. He had to go out for a bit, so waiting for him to get back on IRC and I'm testing it and risking bricking my phone for the good of the 959W users, so please be patient until we have a test package that can restore the bootloaders, param's, everything full for a "W" model. I found a very complicated work around to get out of the loop but I rather wait till we have the 1 click tested and it's easier to use and do.
For now, the standard 1 click should get you back to stock, just don't flash the bootloader at all.
getochkn said:
Me and Brian are working on it. He had to go out for a bit, so waiting for him to get back on IRC and I'm testing it and risking bricking my phone for the good of the 959W users, so please be patient until we have a test package that can restore the bootloaders, param's, everything full for a "W" model. I found a very complicated work around to get out of the loop but I rather wait till we have the 1 click tested and it's easier to use and do.
For now, the standard 1 click should get you back to stock, just don't flash the bootloader at all.
Click to expand...
Click to collapse
You are awesome! It worked like charm, thank you getochkn and xda-dev
zaryan said:
You are awesome! It worked like charm, thank you getochkn and xda-dev
Click to expand...
Click to collapse
Glad I was able to help but I couldn't have done any of this with the guidance of bhundven and others from Team Acid. Hopefully I'll have the true stock modem our phone came with soon, full stock recovery, etc and be able to put out a full package to help people who are bricked or want to go back to stock.
getochkn said:
Me and Brian are working on it. He had to go out for a bit, so waiting for him to get back on IRC and I'm testing it and risking bricking my phone for the good of the 959W users, so please be patient until we have a test package that can restore the bootloaders, param's, everything full for a "W" model. I found a very complicated work around to get out of the loop but I rather wait till we have the 1 click tested and it's easier to use and do.
For now, the standard 1 click should get you back to stock, just don't flash the bootloader at all.
Click to expand...
Click to collapse
any luck with the 1 click for the T959W yet? I am more than willing to donate also, my phone is stuck in download mode only so I desperately need this!!!!
munsen55 said:
any luck with the 1 click for the T959W yet? I am more than willing to donate also, my phone is stuck in download mode only so I desperately need this!!!!
Click to expand...
Click to collapse
Give me a few mins, let me see what I can do.
getochkn said:
Give me a few mins, let me see what I can do.
Click to expand...
Click to collapse
Please bro i have the same problem
please can you help me with the t959w bootloader or 1click solution
i had tried to install a custom rom and my phone is not starting in either way
it is neither starting in download mode ; the normal on nor in the recovery mode
i have already done this rooting and i am not new to installing custom rom in my device i.e. SAMSUNG GALAXY ACE.
i have also tried to boot it by using usb jig but it failed.
so guys do u have any idea how i can get my phone back or is it bricked for ever.
please share ur views.
Can you link the ROM you flashed?
If you take out the battery then put it back in, then turn it on (or attempt to), does it do anything at all? Vibrate, flash something, anything?
If you plug it in to your computer, does it recognize anything as plugged in, even just a driver?
orangekid said:
Can you link the ROM you flashed?
If you take out the battery then put it back in, then turn it on (or attempt to), does it do anything at all? Vibrate, flash something, anything?
If you plug it in to your computer, does it recognize anything as plugged in, even just a driver?
Click to expand...
Click to collapse
i used this rom to flash
ROM & Kernel] Ace-i-Sure GT-S5830i
by .:: BRIJESH ::.
i tried what u said but its of no use
my phone doesnot respond 2 any of these thing it simply stays in off mode
nvnanda said:
i used this rom to flash
ROM & Kernel] Ace-i-Sure GT-S5830i
by .:: BRIJESH ::.
i tried what u said but its of no use
my phone doesnot respond 2 any of these thing it simply stays in off mode
Click to expand...
Click to collapse
hmm.
Here is the ROM you flashed then
http://forum.xda-developers.com/showthread.php?t=2013936
I notice it says this
Caution: This update should be strictly applied to the devices which are having the model number as ACE S5830i and is not for S5830 model. If you still continue to update in your S5830 model, then we should not be held responsible for any damage happened.
Click to expand...
Click to collapse
Sounds like you didn't have the i version...
To unbrick try the method here
http://forum.xda-developers.com/showthread.php?t=1840645
the 2nd section on unbricking, there's a chance you are missing the drivers necessary to have your computer recognize it and restore it. It's worth a shot.
orangekid said:
hmm.
Here is the ROM you flashed then
http://forum.xda-developers.com/showthread.php?t=2013936
I notice it says this
Sounds like you didn't have the i version...
To unbrick try the method here
http://forum.xda-developers.com/showthread.php?t=1840645
the 2nd section on unbricking, there's a chance you are missing the drivers necessary to have your computer recognize it and restore it. It's worth a shot.
Click to expand...
Click to collapse
i have the i version
but can u tell me more about how to install those drivers in my pc
nvnanda said:
i have the i version
but can u tell me more about how to install those drivers in my pc
Click to expand...
Click to collapse
Follow the guide I linked you to step by step from this section
How to Unbrick Ace 5830i / How to use odin -
orangekid said:
Follow the guide I linked you to step by step from this section
How to Unbrick Ace 5830i / How to use odin -
Click to expand...
Click to collapse
i understand what u mean to say but my phone doesnot start in download mode and usb jig is not working
nvnanda said:
i understand what u mean to say but my phone doesnot start in download mode and usb jig is not working
Click to expand...
Click to collapse
Oh, I didn't actually watch the video, I assumed "unbrick" had something to do with maybe not being able to access Download Mode.
Something crazy, are you sure your battery is in correctly, and are any of the pins that connect to the battery from the phone bent?
orangekid said:
Oh, I didn't actually watch the video, I assumed "unbrick" had something to do with maybe not being able to access Download Mode.
Something crazy, are you sure your battery is in correctly, and are any of the pins that connect to the battery from the phone bent?
Click to expand...
Click to collapse
yes buddy everything is correct my phone doesnot start in any mode known
nvnanda said:
yes buddy everything is correct my phone doesnot start in any mode known
Click to expand...
Click to collapse
Sounds hard bricked to me, let me see if someone with more knowledge on that phone has better insight.
It does sound like its hard bricked.
If usb jig didn't work for you, then only Samsung can fix it for you.
As for warranty, depending on what reason you give them for the "sudden death" of your phone, you might be able to claim it.
Your phone's hard bricked. Get it repaired in the service center!
Sent from my GT-I9070 using xda premium
orangekid said:
Sounds hard bricked to me, let me see if someone with more knowledge on that phone has better insight.
Click to expand...
Click to collapse
thanks man
i would really appreciate if anyone tells me how to get my phone back
thank you for understanding my problem
nvnanda said:
thanks man
i would really appreciate if anyone tells me how to get my phone back
thank you for understanding my problem
Click to expand...
Click to collapse
You should probably call Samsung for a possible warranty claim at this point.
orangekid said:
You should probably call Samsung for a possible warranty claim at this point.
Click to expand...
Click to collapse
i don't have the warranty but can you tell me how much will they ask for repairing my ace??
nvnanda said:
i don't have the warranty but can you tell me how much will they ask for repairing my ace??
Click to expand...
Click to collapse
They might honor the warranty without having to "have" anything, just ask them. I have no idea how much they'll charge.
Motherboard replacement - anywhere around 2500INR
Approx 50USD.
There's one last thing to try.
JTAG. If you don't know how to do it, ask these guys if they can help you with your phone. http://mobiletechvideos.mybigcommerce.com/
They're very good and trustworthy, and their service is great.
It may not start in Download mode, but I'm quite sure a JTAG is still in point. If it doesn't boot into Download mode, it means bl.bin got messed up, which is something unusual since only Samsung code/flashable through ODIN can change that file.
Phistachio said:
There's one last thing to try.
JTAG. If you don't know how to do it, ask these guys if they can help you with your phone. http://mobiletechvideos.mybigcommerce.com/
They're very good and trustworthy, and their service is great.
It may not start in Download mode, but I'm quite sure a JTAG is still in point. If it doesn't boot into Download mode, it means bl.bin got messed up, which is something unusual since only Samsung code/flashable through ODIN can change that file.
Click to expand...
Click to collapse
do i have to send my mobile to them or they will provide free guide to unbrick it?
i reside in india so what i have 2 do?
nvnanda said:
do i have to send my mobile to them or they will provide free guide to unbrick it?
i reside in india so what i have 2 do?
Click to expand...
Click to collapse
You will have to send it to them and it will cost money. It's not something you can get a guide to do - they need to hook up hardware to the phone and that hardware is more expensive than paying them to do it, and not a "do it yourself" kind of thing.
You could search for JTAG repair in your country. Shipping might not be too bad in a small pre-paid USPS PMI box if you have access to that - I sent a small box to Russia for $13 USD
Sent from my SGH-T999 using xda app-developers app
Is there any way to upgrade my galaxy s II plus gt-I9105 (non NFC version)
Without any risks of breaking it??
It seems that the 4.2.2 update didn't roll out on my country..
and i dont want to root my phone coz im scared to make a mistake and end up with a brick phone..
any help?? sorry for my bad english..
It won't. Btw flashing different firmware doesn't mean rooting anyway.
Give it a go. It won't brick so easily. Odin isn't that bad
Sent from my GT-I9105P using XDA Premium 4 mobile app
s2 plus firmware upgrade
hey.. i just buy s2 plus without nfc..
my current rom is stock 4.1.2 I9105XXAMB1
i want to upgrade it to 4.2.2
i searched alot.. i downloaded odin and I9105XXUBMH4_I9105ODDBMH3_INU firmware
would any1 help me further what i have todo with these files. some says u have to root or somethnngs like this
Maybe all of you can search through the whole s2 plus forum. Including all. Q/A. General. Android development. All kinds of platform where you can find your answer. Before asking any questions. It would save us very much time
Sent from my GT-I9105P using XDA Premium 4 mobile app
a little confuse
Brian_SGW_CM9 said:
It won't. Btw flashing different firmware doesn't mean rooting anyway.
Give it a go. It won't brick so easily. Odin isn't that bad
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
so you mean flashing 4.2.2 firmware wont brick the phone even if i mess up??
and where could i get Odin and the right firmware for GT-I9105??
btw thanks!!
jetwoot said:
so you mean flashing 4.2.2 firmware wont brick the phone even if i mess up??
and where could i get Odin and the right firmware for GT-I9105??
btw thanks!!
Click to expand...
Click to collapse
Yes it'd brick it if you mess up.
But according to what I experience. I don't think you'd brick it if you keep your phone plugged without doing anything to it. Dude, chill. It won't do any damage
Odin v3.04 is what I prefer. Google it.
Search your firmware on sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
jetwoot said:
so you mean flashing 4.2.2 firmware wont brick the phone even if i mess up??
and where could i get Odin and the right firmware for GT-I9105??
btw thanks!!
Click to expand...
Click to collapse
google odin like bro brian said. afterward it's all straight forward process,and yes,you don't need to be rooted.
off ur phone>press power+home+vol down, then when download mode comes,press vol up to confirm.
then open your odin,makes sure repartition untick(default shoud be unticked),select your firmware via PDA,connect your phone(make sure u installed samsung driver to be detected),see the blue light,then can click start and wait till it's green light and reboot itself.
don't take all my word for it,search some info in general section before you flash it,if you done everything properly,it shouldn't be any problem.
confidence boost
Brian_SGW_CM9 said:
Yes it'd brick it if you mess up.
But according to what I experience. I don't think you'd brick it if you keep your phone plugged without doing anything to it. Dude, chill. It won't do any damage
Odin v3.04 is what I prefer. Google it.
Search your firmware on sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
nickchk said:
google odin like bro brian said. afterward it's all straight forward process,and yes,you don't need to be rooted.
off ur phone>press power+home+vol down, then when download mode comes,press vol up to confirm.
then open your odin,makes sure repartition untick(default shoud be unticked),select your firmware via PDA,connect your phone(make sure u installed samsung driver to be detected),see the blue light,then can click start and wait till it's green light and reboot itself.
don't take all my word for it,search some info in general section before you flash it,if you done everything properly,it shouldn't be any problem.
Click to expand...
Click to collapse
thanks to both of you guys..
my question is about the odin3 v3.04 do i need to download the latest version?
or that version is enough?? coz i've read that there is a certain version for a different kind of devices??
and for the firmware im downloading v4.2.2 (india) on sammobile does it include a english language??
coz im wondering why there is a specific firmware for a country hmm..
i cant find a tutorial on how to update manually it on xda so i google it..
(unfortunately i cant post outside links coz im new on this site)
according to that site i need to use odin v3.07
im confused should i use v3.07??
thanks again!!
jetwoot said:
thanks to both of you guys..
my question is about the odin3 v3.04 do i need to download the latest version?
or that version is enough?? coz i've read that there is a certain version for a different kind of devices??
and for the firmware im downloading v4.2.2 (india) on sammobile does it include a english language??
coz im wondering why there is a specific firmware for a country hmm..
i cant find a tutorial on how to update manually it on xda so i google it..
(unfortunately i cant post outside links coz im new on this site)
according to that site i need to use odin v3.07
im confused should i use v3.07??
thanks again!!
Click to expand...
Click to collapse
dude no offence but...just believe in us
3.04 is working flawlessly
a firmware for a specific country means the default language is set that way, and English is definitely included.
if you follow the outside link, i'm not saying there'd definitely be errors, but it's better to follow instructions given by us
download odin 3.04
download the firmware
put your phone into download mode
kill all KIES process (your computer)
Run odin as admin
connect phone to PC
choose your firmware on the tab: PDA
click start
wait until it reboots
DONE
be brave and simply click start. don't even touch your computer while the process is still going (just in case)
thanks!!
Brian_SGW_CM9 said:
dude no offence but...just believe in us
3.04 is working flawlessly
a firmware for a specific country means the default language is set that way, and English is definitely included.
if you follow the outside link, i'm not saying there'd definitely be errors, but it's better to follow instructions given by us
download odin 3.04
download the firmware
put your phone into download mode
kill all KIES process (your computer)
Run odin as admin
connect phone to PC
choose your firmware on the tab: PDA
click start
wait until it reboots
DONE
be brave and simply click start. don't even touch your computer while the process is still going (just in case)
Click to expand...
Click to collapse
thanks man.. btw how to run odin as admin??
sorry for asking a lot of questions and thanks for being patient..
device not recognize
got an error connecting it to laptop..
i download samsung usb drivers but nothing happen..
odin did not recognize it
i got kies and kill/end them on task maneger's processes
got scared on that moment.. coz the device is already at download mode..
im glad nothing happen i thought i mess up..
what should be the problem now??
incorrect drivers??
if thats the case..
where can i download the right drivers for me..
hoping to get this all done later..
jetwoot said:
got an error connecting it to laptop..
i download samsung usb drivers but nothing happen..
odin did not recognize it
i got kies and kill/end them on task maneger's processes
got scared on that moment.. coz the device is already at download mode..
im glad nothing happen i thought i mess up..
what should be the problem now??
incorrect drivers??
if thats the case..
where can i download the right drivers for me..
hoping to get this all done later..
Click to expand...
Click to collapse
Connect your phone when it's still turned on. Drivers should install now automatically. Which you don't have to click anything and it'd install something. Then when it says it's fully done. Boot to download mode.
Connect it but don't open Odin first. It will install some drivers again. Also automatically. When it's done. Right click on the Odin icon. Choose run as admin (window 7 or up).
If it says connected.
Choose your firmware and click start.
Before you click anything relating to starting the process in Odin. Even if you were in the download mode. If you weren't flashing anything yet, it's gonna be okay
Hope I helped.
If you need any further help. Keep asking. It's fine to answer
Sent from my GT-I9105P using XDA Premium 4 mobile app
it work..
Brian_SGW_CM9 said:
Connect your phone when it's still turned on. Drivers should install now automatically. Which you don't have to click anything and it'd install something. Then when it says it's fully done. Boot to download mode.
Connect it but don't open Odin first. It will install some drivers again. Also automatically. When it's done. Right click on the Odin icon. Choose run as admin (window 7 or up).
If it says connected.
Choose your firmware and click start.
Before you click anything relating to starting the process in Odin. Even if you were in the download mode. If you weren't flashing anything yet, it's gonna be okay
Hope I helped.
If you need any further help. Keep asking. It's fine to answer
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks man it work..!!
i thought that i need to turn on usb debugging under developer option
but now its working no need to do that right??
i know what to do now thanks to you and to nick..
you two are genius THANKS!!!
going to charge my phone now and proceed on flashing.. (is that the right term??)
jetwoot said:
thanks man it work..!!
i thought that i need to turn on usb debugging under developer option
but now its working no need to do that right??
i know what to do now thanks to you and to nick..
you two are genius THANKS!!!
going to charge my phone now and proceed on flashing.. (is that the right term??)
Click to expand...
Click to collapse
No need to debugging at all,just make sure you have >70% battery and you're good to go. Happy flashing and good luck.
success!!
nickchk said:
No need to debugging at all,just make sure you have >70% battery and you're good to go. Happy flashing and good luck.
Click to expand...
Click to collapse
THANKS!! dude..its done..!! im running the 4.2.2 firmware now.. !!
really appreciate the help
no problems on 4.2.2 as of now
excited to know new features..
and its faster than the stock
notice that voice recorder is not playing the new recorded files
(microphone is working coz i use s voice and its good )
what to do now?
jetwoot said:
THANKS!! dude..its done..!! im running the 4.2.2 firmware now.. !!
really appreciate the help
no problems on 4.2.2 as of now
excited to know new features..
and its faster than the stock
notice that voice recorder is not playing the new recorded files
(microphone is working coz i use s voice and its good )
what to do now?
Click to expand...
Click to collapse
i tried it just now,it doesn't play the new recorded sound as well,however,when i put setting under save using memory card,it does play the sound recorded. you can give it a try. work in memory card,doesnt work with device memory.
It work!
nickchk said:
i tried it just now,it doesn't play the new recorded sound as well,however,when i put setting under save using memory card,it does play the sound recorded. you can give it a try. work in memory card,doesnt work with device memory.
Click to expand...
Click to collapse
Your right thanks for a lot of help!
notice a problem
nickchk said:
i tried it just now,it doesn't play the new recorded sound as well,however,when i put setting under save using memory card,it does play the sound recorded. you can give it a try. work in memory card,doesnt work with device memory.
Click to expand...
Click to collapse
even the voice commands (the ability to control music player and camera by voice)
doesn't work and i cant find the voice command in the setting
developer option is missing too in settings.
i just flashed my phone back to stock 4.1.2
then flash cwm
then flash skullface's cm10.1
yay
Brian_SGW_CM9 said:
i just flashed my phone back to stock 4.1.2
then flash cwm
then flash skullface's cm10.1
yay
Click to expand...
Click to collapse
that requires root right??
When I try to start up my phone I get a screen like the ones you see on broken TVs where it's kind of a fuzzy mess and normally end up on the kernel panic thing. I can't get my phone into recovery mode or anything. I rooted my phone a while back and accidentally lost it through an unroot tool, ever since my phone has been unstable but now this has completely ruined it. If someone could shed some light on how to fix it that would be perfect, thank you.
Cal17 said:
When I try to start up my phone I get a screen like the ones you see on broken TVs where it's kind of a fuzzy mess and normally end up on the kernel panic thing. I can't get my phone into recovery mode or anything. I rooted my phone a while back and accidentally lost it through an unroot tool, ever since my phone has been unstable but now this has completely ruined it. If someone could shed some light on how to fix it that would be perfect, thank you.
Click to expand...
Click to collapse
Can you get into download mode?
More details as to Model, Country, Carrier, You want it rooted or not to enable us point you in the right direction.
muntaha_v3 said:
Can you get into download mode?
More details as to Model, Country, Carrier, You want it rooted or not to enable us point you in the right direction.
Click to expand...
Click to collapse
Model - g955u
Country - US
Carrier- VZ
I don't want it rooted.
Cal17 said:
Model - g955u
Country - US
Carrier- VZ
I don't want it rooted.
Click to expand...
Click to collapse
Download this file https://www.sammobile.com/firmwares/galaxy-s8/SM-G955U/VZW/download/G955USQU1AQK3/195747/ and extract to a folder on your PC.
Download the patched ODIN from somwhere on this forum.
Goto Download mode. Connect to PC. Open up Odin, select the appropriate files and flash.
Am at work so keeping this short. Will post a detailed process later if required.
muntaha_v3 said:
Download this file https://www.sammobile.com/firmwares/galaxy-s8/SM-G955U/VZW/download/G955USQU1AQK3/195747/ and extract to a folder on your PC.
Download the patched ODIN from somwhere on this forum.
Goto Download mode. Connect to PC. Open up Odin, select the appropriate files and flash.
Am at work so keeping this short. Will post a detailed process later if required.
Click to expand...
Click to collapse
I flashed the firmware and I'm still having the same issue.
EDIT: Everything seems to be working now! Thanks <3
Edit 2: Never mind, phone is still ****ed the same amount.