Related
Hey XDA,
Looking at moving from my BB to an Android phone. Love the screen on the Mesmerize but not loving the feel of the case. I own a couple restaurants and I am always fixing stuff, getting wet, etc. I also fly balloons and can bang around the basket on sporty landings. Any thoughts on the hardiness of this device, cause the HTC desire seems tougher?
Sent from my GTablet-TnT-Lite using Tapatalk
FWIW. I try my best to keep mine safe but have dropped and skidded across the floor a few times. No scratches. I use otter box commuter case and no screen protector. I just don't like the way they feel. The screen is pretty tough although not impossible to scratch. Others have reported far worse things happening and the phone stood up just fine. I personally love this phone and think with the right case and care it is worth it. But that's me. You may have better or worse luck than me. I don't know I have some pretty bad luck sometimes
Tap-a-Talked.
I have an Otterbox on mine. Took plenty of drunken slams onto concrete. Still fine.
The cheap fishbone (2 piece case, one hard plastic spine that clips over a soft rubber skin) works great, I'ts a good cheap alternative to the otterbox if you don't want to spend that much.
The back part of the phone and the corners are somewhat weak if you don't use a case, but the glass is gorilla glass and for the first 5 months or so I had nothing on the phone and have no noticeable scratches but I did lose a tiny chunk out of the corner on one fall.
FWIW - The desire feels a bit more sturdy without a case or anything, but it's smaller and a little more awkward to hold than the mesmerize IMO.
I have the Seidio SURFACE or Innocase and dropped it down 20 feet of stairs the other night, was totally pissed until i noticed i didn't get one scratch on it
Thanks all, sounds like a plan, just gotta wait a few more days until I'm eligible for a new phone. Squeeze!
Sent from my GTablet-TnT-Lite using Tapatalk
Came across this sexy case the other day:
http://www.youtube.com/watch?v=HhX93pEwpjs
Any reviews?
I'm currently using the Trident Aegis Case, which is getting a little stale - was hoping for something new.
I hear it scratches pretty easily. It's also VERY overpriced. I'm kinda tired of my Aegis too. I've been looking for some nice TPU cases, I'll probably end up going with the G2x Hybrid Case.
FatalityBoyZahy said:
I hear it scratches pretty easily. It's also VERY overpriced. I'm kinda tired of my Aegis too. I've been looking for some nice TPU cases, I'll probably end up going with the G2x Hybrid Case.
Click to expand...
Click to collapse
Could you point to the "Hybrid Case" you're talking about? I just finished skimming through an older topic about the Speck Case and quickly crossed it off my list lol. After reading about the scratch problem, I know my OCD will get the better of me.
Yes it scratches and scuffs up pretty easy for sure. Definitely very overpriced too, fortunately mine was free. Anyway it's a very sturdy and reliable case. Fits perfectly and the built-in buttons work just fine. Every input is accessible. It looks nice on the phone too. I honestly would have considered paying in full for it if I didn't get it for free.
Sent from my LG-P999 using xda premium
Never dropped my phone on pavement with the Speck case and the case looks like it was thrown in a blender.
I bought a speck
Worst decision ever. After about a week, the front rubber bezel trim material started peeling off, it scratches quite easily and starts to look like complete ass about a month after owning/using it. Bought it direct from T-Mobile and they wouldn't exchange it within 30 days. I'm very responsible when it comes to taking care of phones, it goes in and out of my pocket. That's all, folks. Would not recommend a Speck case to anyone, unfortunately. I saw them at CES 2012 and it looked like they were catering to the mass iPhone population, and had no useful advice. I have the black with grey trim. Also, you have to use very slim headphone plugs. 1/5 Stars.
Wow... I'm staying far, far, far away from this case then.
Sent from my LG-P999 using XDA App
I bought one used on ebay cause yea, the cost of new is horrid. I didn't care about minor scuffs/scratches cause i cared more about utility and protection (also the hard shell 2 piece i had was a major pain for when i had to pop the battery), this one is very easy to remove if needed. 40$ new or 7.99 used with free shipping here http://bit.ly/yE1cLQ yea i took it for 8 bucks and am quite pleased. No issue with peeling rubber or any of the likes (even though used)
I dont care if the back is scuffed or scratched a bit cause quite frankly, i dont look at the back side of my phone often, and im not accustomed to placing my phone screen down. power button and volume keys are stiff but still easy to manipulate. if i had bought the case new for 40+$ id rate it a 6/10, but for 8$, Ill give it an 8/10.
I've had the speck hard shell case on my phone since it first came out and I love it! Being a mechanic, I'm not easy on my phones at all lol. But I must say, this has to be the best case I've ever used. Its very strong, and has saved my phone from 6ft drops with ease (oops lol). But from what I've seen, yea the black outer shell scratches but I could care less, it serves its purpose. Keeps my phone safe from falls and whatnot, and also keeps it clean from my dirty hands haha.
i using this case . It make my phone invincible from any dropping .Unfortunately,it scratches easily. I bought mine from ebay ,where have the great deal
I had the tmo speck rubberized case, it was nice for awhile, but since it uses different plugs depending if its in your pocket or on your belt, the pocket plug rubber came off in a month, then after 3 Months the whole rubber backing fell off... not worth the $30 IMO.
Sent from my LG-P999 using XDA
I had the black Speck case along with the black/blue Trident Aegis, and frankly, I kinda like the Speck a little more.
I liked that it was slimmer than the Aegis, and easy to take off of needed, decent amount of protection though, the Aegis could clearly protect it loads better. There were scratches sure, but I put Vans stickers or any other of my favorite brands and that minimized it.
But I got mine off of eBay for $20 new, same as the Trident Aegis, and I was happy to have them.
Sent from someone's Galaxy Nexus running AOKP + Franco
Stay away from those speck candyshell case. They look really nice during the first few weeks of usage, but get scratched up wayyy to easily. After a while (3 months for me) the plastic edges started peeling off, and along came the broken power button cover. Go with Trident Perseus case. The best imo. I have a full body protection for my phone and thats the only case that doesn't mess up the skin cover
Okay guys I'll start this off by saying that I am not impressed with the current case selection for this phone. Now, let's begin with the review.
1.The first case I'll start with will be my Rearth Ringke Fusion hybrid case. I loved this case to death when I first received it on the same day I got my phone, and it has been my favorite case since I got my new one (more on that in a minute ). It feels great in the hand, as it's completely ergonomically similar to the phone itself, and the button feedback is a dream. The clear plastic back has much to be desired, however. The plastic smudges, smears and attracts fingerprints like no other. It also is slippery. VERY slippery. Keep in mind that I have hands that are almost always moist in some form or fashion, so the back plastic of this thing felt like butter. All in all, a very good case and I highly recommend it, except for those with moist hands!
2. Next is my replica Google official bumper. (Replica is perfectly identical to the actual one.) I bought this bumper in conjunction with a carbon fiber dbrand skin, (I still have that on, props to dbrand for making the best skin in the world!) and I was honestly a little disappointed. The stippled texture that bands the sides and sandwiches the fake aluminum plastic piece together feels amazing in the hand. My moist sweaty hands had no problems gripping this bumper, except for the fake aluminum plastic piece that I just mentioned. It's not totally matte, but it's not totally glossy either, it's an odd mixture that feels great to touch, but for me it was a tad slick. It wasn't nearly as bad as the Ringke Fusion case but it was enough for me to take it off sometimes. The buttons clicked with pride and although it did add quite a bit of width to the phone, it had an awesome fitment, no flex or peeling of materials found on this bumper! I would still definitely recommend this case despite the negatives.
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
4. Today, (about 15 minutes before I wrote this), I got my Ringke Slim case in the mail. One complaint: I got an older version, the one with the loose volume slot, but it's not a big deal as I can't really hear any creaking. Other than that minor mishap, for the fifteen minutes I've been using this thin case, and it is EXTREMELY thin, I'm proud to say that this is my favorite case thus far. The matte finish has a soft-touch coating on it that feels like heaven, the button cutouts and speaker, mic cutouts are spot on and without flaws. Most people don't notice it, but this case actually has four little feet on the screen side on the case that allows you to set the phone on it's face and not get the screen scratched. Nice!
The complete lack of top coverage is nice FOR ME because I can finally put my ATH-M50's in my phone without having to remove the case! :good:
Keep in mind that the Slim is a totally different case than the other three, most similar to the bumper however.
Here are links to each of the cases on their respective websites, (if such site exists).
1. http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
2. https://play.google.com/store/devices/details/Nexus_4_Bumper_Black?id=nexus_4_bumper_black&feature=accessories#?t=W251bGwsMSwyLDExMSwiZGV2aWNlLW5leHVzXzRfYnVtcGVyX2JsYWNrIl0.
3. http://www.amazon.com/Mercury-Flexible-Google-Nexus-Black/dp/B00AOW8ICQ/ref=sr_1_1?ie=UTF8&qid=1369864701&sr=8-1&keywords=nexus+4+mercury
4. http://www.rearthusa.com/google-nexus-4-ringke-slim-case
I've been in search of a case i'll actually like. Been thinking about getting the ringke slim but i'm just afraid of the lack of protection. I've never dropped my n4 but for that one time that i do, it'll be great to have the protection.
I also have the ringke fusion, it's a nice case but the back gets dirty and gross pretty easy. The official bumper just feels bulky and my headphones don't fit.
got my Ringke Slim 4 days after i got my n4, had the official bumper ordered with the phone but it just made it too bulky for my taste.
Had my ringke the rest of the time and never looked back. it IS the best case i've ever used on a phone. this comiing from a person who doesnt like to put cases on phone but with this phone just wanted that extra protection. its very slim and doesnt add any bulk what so ever. going on 6 months with the slim and still rocking it.
I own three of the four cases that op reviewed. Exactly my same thoughts for the most part. Pretty well done review. Kudos. Although I would be semi cautious about the official bumper as its known to cracking on the bottom of the usb port. The slim is a really nice case but if covering the back isn't your thing then it isn't the case for you.
Sent from my Nexus 4 using Tapatalk 4 Beta
Tempist305 said:
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
Click to expand...
Click to collapse
I would be tempted to request another one, mine is an absolute perfect fit with all the cut outs being in the correct places. Regarding its slippyness after a couple of days use it starts to get more grippy.
Out of the 4 cases i have bought for the Nexus 4 this is the only one i have kept lol
The Rinke Slim i had was the worst of the lot, made my phone really slippy and offered zero protection.
Honestly I'm surprised there aren't more people using/reviewing the Acase Superleggera pro. I've tried a hatful of cases and by far the Acase is perfect for me. The only complaint that people have for it is that it's bulky, but for me that's a pro. I want my pocket to feel slightly heavy (like 40 grams more than the phone?) to know that my phone is still there, and then I can avoid those mini heart attacks that you get when you think you've lost your phone.
The protection is the best out there,it looks great, isn't slippery at all, feels premium in your hand, button feedback is excellent, not too much of a fingerprint magnet and doesn't interfere with my screen protector.
The only downside is that the back isn't transparent but you get over that initial fascination of showing off the back soon anyway.
I like the Acase pretty well. The amount of lint that it picks up bothers me more than anything. I think it would be nice if the inner case was a light - medium grey, so the lint is less apparent. I have the Mercury, Superleggera, Ringke Slim, and Poetic bumper. I change them out all of the time because I'm not completely satisfied with any of them.
Sent from my Nexus 4
since you have protection on the back and you are using the Rinke slim which is made to fit precisely, do you feel like it is adding too much pressure to the phone? I have a feeling that may have happened to mine and when i squeeze the top part of my phone it creaks. I'm not sure if this was the cause, but if yours has zero creaks then I will assume it is safe to have the skin on the back along with the case.
Mohit12 said:
Honestly I'm surprised there aren't more people using/reviewing the Acase Superleggera pro. I've tried a hatful of cases and by far the Acase is perfect for me. The only complaint that people have for it is that it's bulky, but for me that's a pro. I want my pocket to feel slightly heavy (like 40 grams more than the phone?) to know that my phone is still there, and then I can avoid those mini heart attacks that you get when you think you've lost your phone.
The protection is the best out there,it looks great, isn't slippery at all, feels premium in your hand, button feedback is excellent, not too much of a fingerprint magnet and doesn't interfere with my screen protector.
The only downside is that the back isn't transparent but you get over that initial fascination of showing off the back soon anyway.
Click to expand...
Click to collapse
I ordered one of these yesterday after reading many reviews. Looks like the best bang for the buck and some decent drop protection, which many of the other cases don't have. I also like the fact that the measurements have it only slightly more bulky than the Diztronics case I have, so it will fit in my leather holster perfectly.
Bumper
Tempist305 said:
Okay guys I'll start this off by saying that I am not impressed with the current case selection for this phone. Now, let's begin with the review.
1.The first case I'll start with will be my Rearth Ringke Fusion hybrid case. I loved this case to death when I first received it on the same day I got my phone, and it has been my favorite case since I got my new one (more on that in a minute ). It feels great in the hand, as it's completely ergonomically similar to the phone itself, and the button feedback is a dream. The clear plastic back has much to be desired, however. The plastic smudges, smears and attracts fingerprints like no other. It also is slippery. VERY slippery. Keep in mind that I have hands that are almost always moist in some form or fashion, so the back plastic of this thing felt like butter. All in all, a very good case and I highly recommend it, except for those with moist hands!
2. Next is my replica Google official bumper. (Replica is perfectly identical to the actual one.) I bought this bumper in conjunction with a carbon fiber dbrand skin, (I still have that on, props to dbrand for making the best skin in the world!) and I was honestly a little disappointed. The stippled texture that bands the sides and sandwiches the fake aluminum plastic piece together feels amazing in the hand. My moist sweaty hands had no problems gripping this bumper, except for the fake aluminum plastic piece that I just mentioned. It's not totally matte, but it's not totally glossy either, it's an odd mixture that feels great to touch, but for me it was a tad slick. It wasn't nearly as bad as the Ringke Fusion case but it was enough for me to take it off sometimes. The buttons clicked with pride and although it did add quite a bit of width to the phone, it had an awesome fitment, no flex or peeling of materials found on this bumper! I would still definitely recommend this case despite the negatives.
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
4. Today, (about 15 minutes before I wrote this), I got my Ringke Slim case in the mail. One complaint: I got an older version, the one with the loose volume slot, but it's not a big deal as I can't really hear any creaking. Other than that minor mishap, for the fifteen minutes I've been using this thin case, and it is EXTREMELY thin, I'm proud to say that this is my favorite case thus far. The matte finish has a soft-touch coating on it that feels like heaven, the button cutouts and speaker, mic cutouts are spot on and without flaws. Most people don't notice it, but this case actually has four little feet on the screen side on the case that allows you to set the phone on it's face and not get the screen scratched. Nice!
The complete lack of top coverage is nice FOR ME because I can finally put my ATH-M50's in my phone without having to remove the case! :good:
Keep in mind that the Slim is a totally different case than the other three, most similar to the bumper however.
Here are links to each of the cases on their respective websites, (if such site exists).
1. http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
2. https://play.google.com/store/devices/details/Nexus_4_Bumper_Black?id=nexus_4_bumper_black&feature=accessories#?t=W251bGwsMSwyLDExMSwiZGV2aWNlLW5leHVzXzRfYnVtcGVyX2JsYWNrIl0.
3. http://www.amazon.com/Mercury-Flexible-Google-Nexus-Black/dp/B00AOW8ICQ/ref=sr_1_1?ie=UTF8&qid=1369864701&sr=8-1&keywords=nexus+4+mercury
4. http://www.rearthusa.com/google-nexus-4-ringke-slim-case
Click to expand...
Click to collapse
I bought a Minisuit (transparent) for protection when going camping, beach, or a very wet day. And I also bought the Poetic bumper. The minisuit is great, the only problem is that the power button sometimes is hard to press. With the Poetic I had problems with the first unit they send me, it broke in a week. I called poetic and they replaced the bumper with (2) new ones, they told me that they had problems with the first batch they ordered, but they assured me that the new one was perfect, today it's been 4 months since I'm using the Poetic and I can say is been great, no pealing, no plastic coming off, and I still have a replacement new one just in case.
I got a white color of ringke slim case. the material is too slippery. never like it. plus the corners feel really sharp by touching it it may scratch my N4.
I ordered Incipio feather case. It may not be slim as ringke but it feels really good.
So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
chillsen said:
So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
Click to expand...
Click to collapse
Agreed, i bought both through amazon, and while i didnt care to use any of the screen protectors the Ringke is MUCH better and really sleek looking. Material kind of feels like the back of the phone and even looks like the back. Only downside is i hate trying to get the freaking waterproof flap out at night! Grrrr
I too have this case and am liking it.
It is hard to hook your fingernail to get the charging flap open although I assume most cases will be similar.
Ok...I'll jump aboard. I bought two cases before I got the S5 in my hands. One was the Ringke and the other was the Spigen Tough Armor.
While the Tough Armor is a very solid case and looks great, it makes the S5 feel like a brick in my hands. On the other hand, the Ringke Slim has a similar texture and gripability as the S5 naked. It doesn't even feel like the device has a case on it at all.
Nice! Defo would give Spigen a run for its money! Great to see competition here and there. At the end, we, the consumers, would benefit on it. More options, right?
Yea I just orderd 2 new Ringke cases. Ill post em up when they comr in tomorrow
Sent from my Nexus 7 using Tapatalk
thanks for this review man. Was about to order a spigen case and then saw this and after a little more research i just ordered the ringke. I went with the Dot black, I'll post up some pictures to compare with other colors once it comes in.
I got the DOT black I ordered from their site and got the case plus screen protector for $10 with free shipping
Sent from my GT-I9505G using xda app-developers app
I got this case delivered today.. It is AWESOME and for 5 bucks it was a steal.. I crumbled up the useless screen protector and threw it out
I should have gotten white though, because my phone is white and I got the blue color. It kind of looks funny.. I thought blue and white would look good.
It doesn't
I got the spigen neohybrid case and their glas.tr slim glass screen protector. Had literally the same setup on my s4 lol same yellow trim too
Sent from my SM-G900T using Tapatalk
Paulenski said:
I got the spigen neohybrid case and their glas.tr slim glass screen protector. Had literally the same setup on my s4 lol same yellow trim too
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
I love that spigen hybrid case, SEXY!! but I went through 3 F-#@[email protected]# plastic sleeves, they always broke on the bottom eventually.
So the screen protector is garbage
Sent from my GT-I9505G using xda app-developers app
chillsen said:
So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
Click to expand...
Click to collapse
Got anymore images? Link doesn't work for me!
I like the case. It feels good in your hand when you hold the phone.
One thing though, on my case the lip around the chrome front trim sides covers more than the lip on the top and bottom. At first I thought I didn't snap it in all the way but it seems like that's just the way it is? Is that how it fits for the rest of you that already have the case?
pgibbons said:
I like the case. It feels good in your hand when you hold the phone.
One thing though, on my case the lip around the chrome front trim sides covers more than the lip on the top and bottom. At first I thought I didn't snap it in all the way but it seems like that's just the way it is? Is that how it fits for the rest of you that already have the case?
Click to expand...
Click to collapse
That's how they all are. Actually I really like this design. It's almost as if its spring loaded, its smaller than our phone, it doesn't just fit like a glove, its actually too small. But the cut outs on the top and bottom allow the plastic to "flex" basically its as if its gripping the hell out of phone, holding into place.
The Spigen hybrid I had for my GS4 was awesome looking, but broke all the time (plastic by the bottom) in anycase, this one is just as nice IMO.
Doesn't add much thickness at all, but will save it from a drop and the camera while on a desk.
If anyone is wondering, I just dunked my phone for 30 minutes with this case. So it doesn't effect the IP68(yea, I said 8, because this thing is pretty much water PROOF) rating.
http://m.aliexpress.com/item/1720284970.html
What are the odds of these cases being fake
Sent from my GT-I9505G using xda app-developers app
@chillsen Hey OP, after I read your 1st psot I figured id give it a shot. I've had bad experiences with her cases and the one that you posted a pic of, is the same one I got as well. I got it 3 days ago, and still haven't put it on, in fear it will scratch the outer bezel while putting it on, and taking it off
Have on had this issue at all? Seems like a real snug fit, thought if ask before I pushed my hone into the car lol.... Thanks bud!
Sent from my SM-G900P using Tapatalk
reverepats said:
@chillsen Hey OP, after I read your 1st psot I figured id give it a shot. I've had bad experiences with her cases and the one that you posted a pic of, is the same one I got as well. I got it 3 days ago, and still haven't put it on, in fear it will scratch the outer bezel while putting it on, and taking it off
Have on had this issue at all? Seems like a real snug fit, thought if ask before I pushed my hone into the car lol.... Thanks bud!
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
i can only say i've had to take the case off and on many times to show off to my friends how thin the actual phone is. i mastered how to take it off by pressing outwards the top left corner. you push it out enough so you can fit a finger through and i just slide it down the side and the whole case pops off. this is the easiest way i found. at first i had a problem because i didn't try a corner but started from the middle of the long side. but to answer your question, no scratches.
LeKtRiCzzz said:
http://m.aliexpress.com/item/1720284970.html
What are the odds of these cases being fake
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
I'm 100% sure they are fake. Look at the feedback page, it's full of "Excellent!" and "good quality" multiple times by the same few user accounts.
I just got this delivered today with the white dot pattern. I also ordered the wireless charging back the other day, definitely don't think wireless charging will work with this on - what an idiot I am.
I noticed that Urban Armor Gear (UAG) had available P7P cases on their website, so I ordered one when I ordered the phone on October 6th.
Received the phone on the 12th, but the case had not yet shipped. I sent them an email that they replied to with, "We have 8-10 days to ship orders." A little standoffish, but ok, maybe that person was just tired of answering emails.
Received the case today October 20th. 14 days? Not too bad if I stop comparing everything to Amazon, but a long enough time that I ended up getting a Spigen Ultra Hybrid case from Amazon cause as you all know, the phone itself is quite slippery. It fit and worked just fine but the cutouts in the bottom felt a little sharp, as per usual with Spigen.
Anyhow, when I was looking at the UAG case on the website it looked fairly bulky and I was pretty sure I wouldn't be able to use wireless charging but I can confirm that it is charging wirelessly as we speak on a 1st gen Pixel Stand.
The case is a little less rugged than some of their previous ones. As far as back and corner protection, I think it's fine, but what concerns me most is the screen. The older cases (for phones without beveled edges) had a raised lip all the way around them to help protect them but with how the P7P is designed, the case is designed with the curved screen in mind and so it is only protected when placed on an absolutely flat surface.
The corners are slightly raised while the sides of the case thin down below the bevel, which makes sense, but also causes me anxiety because if I drop it, it's basically a coin flip on whether or not the screen survives.
The case itself feels ok. Not great, and definitely not secure as the edges will sometimes lift or push away from the side of the phone as you handle it.
The extra bevel around the camera ribbon is great, and all the cutouts feel nice and smooth.
A picture they don't show you on the website is the top of the case. There is no window or cutout for the antenna area and only a small hole for the mic.
I don't use a screen protector but as far as I can tell, I doubt you would be able to get one to stay on this thing with how flimsy the sides of the case move around and don't really hold tight to the phone. Even the cheap Spigen case held more securely.
I'll give it a few days but as someone who used to love UAG cases back in the Pixel and Pixel 3 XL days, I'm pretty disappointed in this new one.
I noticed they had that case and I thought about it but I stopped buying UAG cases when the Pathfinder for my 8 Plus literally fell apart. Switched to Spigen Tough Armor since and have had zero issues.
EDIT: Actually I think it was my HTC One (M8). Either way, it split at the bottom and I had to toss it.
Everything they said and more. Had it on my phone 1 day....and that was because I was at work with no backup case. Promptly sent it back for a refund. JUNK! Cuts off the screen corners, peels up screen protector, etc. NO THANK YOU!
FWIW, I got this case today: https://www.amazon.com/dp/B0BBFXYPQ2?psc=1&ref=ppx_yo2ov_dt_b_product_details
It feels like the GOOD UAG cases felt when I used my Galaxy Note 20....much better than the actual UAG case for the P7P. Just wish it also came in other colors....