Related
I recently changed back my build.prop to the original one that i backed up before. Then my device cannot boot anymore. It is stuck in the ASUS splash screen when i boot the device.
Then I flash the latest CWM recovery. But the latest version CWM cannot do anything like factory reset or flash zip.
After that, i tried to use the "wipe data" in the bootloader, it doesn't work either (still stuck in the splash screen).
And then i tried cold boot linux and it also doesn't work. Up to this point, I cannot find anyway to fix it.
However, I found that adb is somewhat working in CWM recovery. I tried "adb push build.prop /system/build.prop" (the build.prop is extracted from the US_epaduser_10_26_1_7_UpdateLauncher.zip package from ASUS official site), it doesn't work either.
I put the US_epaduser_10_26_1_7_UpdateLauncher.zip package from asus support site in sd card and tried to flash it by CWM recovery, it doesn't work either.
AFTER ALL THESE PROCEDURE, i think the system is corrupted because of some possible dirty wipe
IS THERE ANY WAY TO WIPE EVERYTHING AND RESET THE whOLE SYSTEM?
i feel like my device is completely dead... so i need help and solution asap
my device is unlocked, rooted, and updated to 10.26.1.7 android 4.3.
it is a US version.
btw i asked ASUS support and they said they would charge CAN$330 for fixing it (replacing the main board), which is.........
So is there any ways to fix it without sending it to asus repair ccenter?
I want to make sure that
1. The wipe data function in the bootloader works
2. Does wiping data in bootloader fix the build.prop problem
Or do anyone of you have any idea of solving tthis problem?
ANYWAY TO WIPE EVeRUTHING INCLUDES SYSTEM thROUGH BOOTLOADER?
sorry for my bad english
Have you tried to install Full Recovery Mode ?
First Enable USB Debugging and watch if your Device is correctly recognized on you Device Manager .
Search and install the software , for first use i suggest to search some Tutorials about this.
Then you can use the Full Recovery Mode and format / wipe cache and system .
Hello,
My TF700 was on a CleanRom (2.3 i think), for a while, i decided to update.
- I installed the latest CWM (via fastboot) and flashed a Cyanogen 10.2 "stable", but my tablet freezed very quickly after successful boot, i tried some reboots and get same problem.
- I tried to install a stock ODEX root ROM, the tablet freezed at asus logo
- I flashed TWRP instead of CWM, it doesn't helped
- I tried wipe data and cache with TWRP, then my data was not accessible anymore and TWRP was unable to re-create it
- I searched on forums and found on this one that flash a boot.blob file can solve the problem
- It doesn't and now CWM and TWRP refuse to work ....
So i post here before getting my tablet completely brick.
At this point, i get access to fastboot / abd, CWM load but don't work (reboot when trying to do something), TWRP don't load.
Any suggestion to get back to a Stock ODEX rooted rom ?
Excuse my english ...
Asphodele said:
Hello,
My TF700 was on a CleanRom (2.3 i think), for a while, i decided to update.
- I installed the latest CWM (via fastboot) and flashed a Cyanogen 10.2 "stable", but my tablet freezed very quickly after successful boot, i tried some reboots and get same problem.
- I tried to install a stock ODEX root ROM, the tablet freezed at asus logo
- I flashed TWRP instead of CWM, it doesn't helped
- I tried wipe data and cache with TWRP, then my data was not accessible anymore and TWRP was unable to re-create it
- I searched on forums and found on this one that flash a boot.blob file can solve the problem
- It doesn't and now CWM and TWRP refuse to work ....
So i post here before getting my tablet completely brick.
At this point, i get access to fastboot / abd, CWM load but don't work (reboot when trying to do something), TWRP don't load.
Any suggestion to get back to a Stock ODEX rooted rom ?
Excuse my english ...
Click to expand...
Click to collapse
Hey Your in the right place
Shoot me an email, we can review your issues and if we find a solution we can post back here to help
XDA users with there issues....
My email is everywhere talke a look around
Thx Josh
Asphodele said:
Hello,
My TF700 was on a CleanRom (2.3 i think), for a while, i decided to update.
- I installed the latest CWM (via fastboot) and flashed a Cyanogen 10.2 "stable", but my tablet freezed very quickly after successful boot, i tried some reboots and get same problem.
- I tried to install a stock ODEX root ROM, the tablet freezed at asus logo
- I flashed TWRP instead of CWM, it doesn't helped
- I tried wipe data and cache with TWRP, then my data was not accessible anymore and TWRP was unable to re-create it
- I searched on forums and found on this one that flash a boot.blob file can solve the problem
- It doesn't and now CWM and TWRP refuse to work ....
So i post here before getting my tablet completely brick.
At this point, i get access to fastboot / abd, CWM load but don't work (reboot when trying to do something), TWRP don't load.
Any suggestion to get back to a Stock ODEX rooted rom ?
Excuse my english ...
Click to expand...
Click to collapse
Sounds like you are on an old bootloader. Flash the stock rom from asus by unzipping the zip you download from their website and placing in the root folder of your micro sd and then go into rck from the bootloader menu (power + volume down whilst booting)
Or you could just flash it from recovery....
lj50036 helped me to flash a new bootloader, recovery, rom and nvflash to make it unbrickable
Not just helped he spent many times to explain me how it works and what he did.
He is very nice and this was a pleasure to talk with him, i'm happy that there's still person like that on this planet
see you !
Asphodele said:
lj50036 helped me to flash a new bootloader, recovery, rom and nvflash to make it unbrickable
Not just helped he spent many times to explain me how it works and what he did.
He is very nice and this was a pleasure to talk with him, i'm happy that there's still person like that on this planet
see you !
Click to expand...
Click to collapse
I buy a tf700 with cm 11 a few days ago i am really interessted on how this steps works. I really want to make it unbrickeable, But i dont really understand how it works. I can not enter in fastboot. at least i got cwm interface when rebooting with adb into recovery.
Can u explain how you did it?
It invovles flashing a modified bootloader and the flatline recovery and then using Wheelie to generate your nvflash blobs.
Step-by-step instructions (which you need to follow to the letter) are here:
https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/
Stuck in boot loop, fastboot and recovery accessible
Hello,
I'm having a similar issue and I need help! Initially my tablet was rooted with Cromi-X 5.4. Then I decided to try Crombi-KK.
Here is what happened:
- Updated TWRP recovery
- Did a full wipe as recommended
- Flashing got stuck at the Crombi-KK loading sign
- Tried to reflash but TWRP wasn't detecting data partition anymore
- Instead installed the other recommended recovery CWMR.
- Flashed Crombi-KK, it worked. Played around with it for a few days, it was wonderful, fast and responsive.
- Battery died out and when I turned it back on I got a UIDs system inconsistent error.
- I found online many recommendations to reflash so I tried to do that
- Since then I'm stuck in a boot loop. I see the initial "bios" Asus logo then it restarts over and over.
- I am able to access bootloader and recovery
I've tried reflashing the asus stock blob. I've tried wiping the data through CWMR but it starts working and then it restarts. I don't know what to do anymore, so if anyone can help me, I would really appreciate it!
Thanks
Which recovery and bootloader version do you have now?
A (for KK) outdated bootloader seems the most likely culprit.
You can try save the recovery log when you flash or grab a logcat of the bootloop, but probably it'll only tell you that the recovery cannot mount /data.
Determine that you are on the correct bootloader, if not update it. If you're lucky the tablet will start right up. If it doesn't, formatting /data is the only way I know to get it back. Not just wiping - formatting it. You will loose everything on internal SD, so I hope you have a nandroid you can restore from later.
If you use TWRP 2.7+ be aware that formatting can take more than an hour. Let it finish!
For good measure, download CROMBi-KK again, check the md5 and then flash that file.
I'm on 10.6.1.14.10 bootloader which I think is the latest one
I have 6.0.4.7 CWMR
I'm trying to format data completely but when i do it in CWMR it starts and then the tablet reboots on it's own after a couple of minutes.
How can I retrieve the logs, I never had to do it before.
Thanks for your help
Mhh, getting a little more complicated.
Your BL is ok...
What do you see in CWM when you go into Mounts and Storage? What is mounted?
The recovery logs are under Advanced > show logs.
I'm at work now but from what I remember the only thing mounted was the cache. I'll double check tonight. Do you think there's any hope or I have a brand new paper weight?
yasyas said:
I'm at work now but from what I remember the only thing mounted was the cache. I'll double check tonight. Do you think there's any hope or I have a brand new paper weight?
Click to expand...
Click to collapse
Can you fastboot flash twrp?
It's much much better than CWM, has its own terminal and will be easier to offer the correct format command.
sbdags said:
Can you fastboot flash twrp?
It's much much better than CWM, has its own terminal and will be easier to offer the correct format command.
Click to expand...
Click to collapse
So I flashed TWRP and when I go in mount/storage everything is selected except for system. Should I do a format data from the wipe menu before flashing crombi-kk again?
yasyas said:
So I flashed TWRP and when I go in mount/storage everything is selected except for system. Should I do a format data from the wipe menu before flashing crombi-kk again?
Click to expand...
Click to collapse
To be in the safe side, yes, that is what I would do. TWTRP 2.7.+ takes a long time to format and it may seem the process got stuck. Give it at least 90 minutes to finish.
Then reflash CROMBi
I'm back up and running !!!
This time installing TWRP, everything was mounted (maybe my previous flash before CWMR wasn't good), did a format data, waited until it was done, flashed latest Crombi-KK and going through setup now. Hopefully won't have the same UID issue on next shutdown. I didn't enable fsync or journaling so hopefully it won't happen again.
Thanks both of you for your help!
Good deal! Happy for you!
Rooting google pixel zl
I am using a rooted Xperia U , with CM 11 ROM installed in it.
I was trying to install new ROM but accidentally in TWRP Recovery wipe data option i have selected everything which includes sd card ,system files and android secure files[/COLOR][/COLOR] and deleted it .
Now when i reboot my phone i can only see the boot screen with custom logo CM 11 , Also i cant access TWRP Recovery also.
I will Thankful to any Help
Did you even create a backup? Whenever I mess with my phone, I always make a backup.
In this case I think you didn't, and you're saying you can't access recovery either?
Try again and see if you can by holding the button combination to open recovery.
If that doesn't work, go into boot loader, connect your phone to your PC and using adb boot it into recovery. (Only if there is no option for recovery in your boot loader).
Tell me how it goes and I'll continue to help you out.
Just make sure to @ my user so I know I've been mentioned. I have way to many posts and subscribed threads to go through.
For example @TheArc
Hello everyone,
First of all, rom and recovery are not from me... I just want to make a full guide to help you
So let's go !!!!!
1 step: unlock bootloader
https://en.miui.com/unlock/
BE CAREFUL unlocking your bootloader will erase all your data (internal storage) so don't forget to make a backup
2 step: flash twrp recovery
Download the recovery image from here
https://drive.google.com/file/d/1-1CSfT4lQwFZngu6RI9eowLA9CmEMEPw/view?usp=drivesdk
Be sure to have adb and fastboot tools on your computer ... If not take a look at here
https://forum.xda-developers.com/showthread.php?t=2317790
Past TWRP_umi.img on minimal adb and fastboot directory.
Open a cmd here.
Enable usb debugging on your device
Reboot your phone on bootloader (hold volume down + power), connect it to PC and tape:
fastboot devices
fastboot flash recovery TWRP_umi.img
Then tape fastboot reboot while holding volume up button on your devices to reboot in recovery
3 step:
At the first launch of Twrp You have to choose SWIPE TO ALLOW MODIFICATION
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Otherwise the ROM will not boot.
5 step:
Reboot into recovery from twrp.
6 step:
Connect your phone to your PC and paste the xiaomi.eu ROM of your choice (stable or Dev)
7 step:
Flash ROM from recovery
8 step:
REBOOT AND ENJOY :good::good::good:
Does Xiaomi EU Rom run either on encrypted and unencrypted storage?
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
carolef1984 said:
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
Click to expand...
Click to collapse
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
-fluffy- said:
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
Click to expand...
Click to collapse
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
carolef1984 said:
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
Click to expand...
Click to collapse
write what u do wen u try to flash the zip
an have u downloadet the correct zip file
Thanks everyone, i think it must have been something to do with the qualcomm drivers installed incorrectly. i have re-done that from scratch and managed to get mi flash tool working. Sorry to waste everyones time.
Greetings
I have followed the tutorials to perfection like 2-3 times and I still face the same issue
I always go back to TWRP after trying to boot into system.
I have tried 2 different recovery files
The experimental one asks for a password. and the other one works but keeps going back to recovery after flashing.
MIUI 11 rom
MIUI 12 rom
No matter what I do It keeps going back to recovery.
It's my only device so I truly need help.
I have tried re installing everything already.
At this point I just want to install stock rom and keep using it without flashing anything please help.
PHONE FINALLY REBOOTING INTO SYSTEM. I myself don't know what i did!!!
Bootloop (stuck on 5G logo) after flashing Xiaomi.eu ROM
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
Click to expand...
Click to collapse
try this
format data
reboot recovery
connect phone to pc
put zip file ro phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.JBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBM
Thank you very much.
Click to expand...
Click to collapse
hi didt it work for u
IT WORKED properly like a charm!!!
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 12:57 PM ---------- Previous post was at 12:47 PM ----------
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 01:15 PM ---------- Previous post was at 12:57 PM ----------
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
Quick questions, do netflix and google pay work after the flash?
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
yes
cedric3320 said:
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Click to expand...
Click to collapse
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
adario73 said:
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
Click to expand...
Click to collapse
Hello,
You have to format data the first time you flash xiaomi.eu rom because their rom is base on Chinese firmware (if you don't or just wipe it will not boot)
Each time you will flash a rom with different base (from Chinese base to global base or global to Chinese) you will have to format data !!
You format data to remove encryption.
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
Google pay isn't working as the safety net doesn't pass on stable realeses, someone made it to work on betas but I had no luck though
Stuck without solutions
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Dallee said:
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Click to expand...
Click to collapse
an what is the latest miui12 u try to flash
I just wanted to try a rom except miui.......unlocked the bootloader and installed the twrp using platform tools........I watched a tutorial on yt to do it.....but the maker of the video didnt told me that i need to have the files for the custom os installed on my phone......I had no files related to custom rom intalled on my phone.....Now i am not able to reboot into system.....I bi mistakely wiped the internal storage and data,....now when i try to do anything it shows no partition found(while restoring etc).....Pls help me!
Rayirth said:
I just wanted to try a rom except miui.......unlocked the bootloader and installed the twrp using platform tools........I watched a tutorial on yt to do it.....but the maker of the video didnt told me that i need to have the files for the custom os installed on my phone......I had no files related to custom rom intalled on my phone.....Now i am not able to reboot into system.....I bi mistakely wiped the internal storage and data,....now when i try to do anything it shows no partition found(while restoring etc).....Pls help me!
Click to expand...
Click to collapse
Download a ROM, put it on a USB drive, use an adapter to convert USB to microUSB or USBC(whichever your device uses), connect the USB to your device, boot into TWRP, choose the Install option, when you get to where you choose your files, find the USB drive and flash your ROM.
Droidriven said:
Download a ROM, put it on a USB drive, use an adapter to convert USB to microUSB or USBC(whichever your device uses), connect the USB to your device, boot into TWRP, choose the Install option, when you get to where you choose your files, find the USB drive and flash your ROM.
Click to expand...
Click to collapse
Hi
Thanks for the suggestion.
I just want to know something.
I transferred the rom zip file to my phone as u said and i can also see it in internal storage.Am also able to flash it
The whole story is like i first unlocked my bootloader and then installed the custom recovery...I have heard thatto install a custom rom, u require root
But in the case i did not perform any root.So is it ok to flash the rom+it shows failed to clear cache and failed to mount /product errors highlighted in red colour.
Pls advice <3
Rayirth said:
Hi
Thanks for the suggestion.
I just want to know something.
I transferred the rom zip file to my phone as u said and i can also see it in internal storage.Am also able to flash it
The whole story is like i first unlocked my bootloader and then installed the custom recovery...I have heard thatto install a custom rom, u require root
But in the case i did not perform any root.So is it ok to flash the rom+it shows failed to clear cache and failed to mount /product errors highlighted in red colour.
Pls advice <3
Click to expand...
Click to collapse
No, root is not required to flash a ROM, all that is required is an unlocked bootloader and a custom recovery.
I suggest you start over by flashing the exact same stock firmware version that you had before modified the device to fix the errors, then unlock the bootloader again(if flashing the firmware locks the bootloader again), then flash TWRP again, download your ROM and place it in your internal storage, flash the ROM but do not wipe anything until after you have flashed the ROM, after flashing the ROM, factory reset the device and wipe cache and dalvik cache(but not system and not internal storage) then reboot the device.