Hello !
I have a problem with my g2x : if I flash another kernel than stock with stock ROM, I get question mark in the battery indicator. I have to disable airplane mode to get the battery percentage.
I tried CM7, CM9, stock 2.3.4 with faux 14b2… The only custom kernel that works is FAUX CM7 kernel with DebauchedSloth's battery driver.
Any idea ?
Thank in advance !
I'm not certain, but have you tried mazout360's kernels? They were based on faux and maybe that would work. Its been a long time since I had this phone though... Are you running stock 2.3.4?
Sent from my Nexus 5 using XDA Premium 4 mobile app
It was working on stock 2.3.4 until I flashed faux kernel but it sudently reworked after a rebot. I'm actually on mazout's cm10.1 ROM ans it is working to. I don't understand. Could it ne related to my multiples batteries ?
As far as I know for the cm10.1 they never got it working fully. I'm not sure about the multiple batteries though if it's already not working it probably doesn't help to confuse it more lol. I think at some point they had mentioned the battery indicator being tied to the ril. I don't know what one has to do with the other but if you're not using the radio at all it might also affect the battery indicator.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Related
I would like to oc my g2x with the my stock rom please any suggestions or ideas
Sent from my LG-P999 using XDA App
the trinity kernel is the only one that will run on stock and i cant stand running it... all my phone does is lock up, have wake up wonkiness and force me to pull my battery 10 times a day...
JHaste said:
the trinity kernel is the only one that will run on stock and i cant stand running it... all my phone does is lock up, have wake up wonkiness and force me to pull my battery 10 times a day...
Click to expand...
Click to collapse
+1 Although not as much, maybe 1-2 times per day...but its soo good.
G2X
There's a lot of different Trinity kernels in the section they say cm7 eb none show stock
Sent from my LG-P999 using XDA App
Bspence415 said:
There's a lot of different Trinity kernels in the section they say cm7 eb none show stock
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
use the EB1.0.4 FR kernel... Eagles Blood is a modified stock rom so the trinity kernel will run on it...
That's the one I tried I can't get past the boot screen after i flashed through cwm recovery
Sent from my LG-P999 using XDA App
did u wipe cache n then go into advanced n wipe dalvik then flash???? i had that prob way back n have always did this method n it works
faux123 has just released a beta build of a Stock kernel.
http://forum.xda-developers.com/showthread.php?t=1102720
From the post:
faux123 said:
THIS IS ONLY FOR THOSE WHO ARE WILLING to BETA TEST THIS ON THEIR OWN PHONE... IF YOU ARE NOT COMFORTABLE WITH THIS YOU SHOULD NOT FLASH THIS.
Click to expand...
Click to collapse
I'm trying to find out the best way to install a new rom & kernel.
Should you update kernel first then rom? or rom first then kernel?
Always rom first then kernel.
Sent from my LG-P999 using xda premium
Thanks for the info...
any particular reason why?
Because when you flash a rom it contains a kernel that will erase any kernel you flash before hand. So say your wanting to flash morfics trinity kernel for cm7, you'd want to flash cm7 first then trinity kernel.
With the rom your using.... does your APN work?
I've tried the Power+ Volume UP and still no APN connection. My settings are there an selected but it doesn;t connect.
It should work, faux's rom are second to none imho.
But for right now i couldn't tell you since my baseband is unknown and gonna be sent back to LG.
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Its like that for all rom's and kernels for g2x.
Sent from my LG-P999 using xda premium
mightymike889 said:
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Click to expand...
Click to collapse
Because the default governors of stock kernels are already very good.
Sent from my Calculator with Android.
jose makalolot said:
Because the default governors of stock kernels are already very good.
I wish i could say thats true butninhave to chargebmybfone 2-3 times a day!!
Sent from my Calculator with Android.
Click to expand...
Click to collapse
Sent from my LG-V909 using XDA App
i was running cm7 (2.3.7)with DS OC/UV Kernel Version 0.4.2 with setcpu. did all the wipe thing charged to 100% turned off phone about 6 hrs later turned back on battery at 25% what the hell. so now im running eb (2.3.7) no oc kernel i really want to be able to oc when i need to.
Try to use CM kernel, DS provides better battery life but doesn't read it correctly
Sent from my LG-P999 using xda premium
thank you ill give it a try could you please tell me if that doesnt work out how to go back to the kernel that came with the rom?
Dont forhet to do the backup first . Then just restore ur backup if needed, its always goes back to stock kernel when done. So u would need reflash custom kernel every time u restored.
Sent from my LG-P999 using xda premium
ah ok thank you makes sense
U welcome
Sent from my LG-P999 using xda premium
Currently running MIUI 1.99 with Matr1x #5 kernel. Looking to flash a new ROM and/or kernel as it's been awhile. There's so many of each that I don't know where to start. My main priorities are stability and speed.
The only other ROM I've used is Cyanogenmod but I had a lot of issues with random reboots. Have these issues gotten better?
Any ROM suggestions? Thanks
Rooted stock with Matr1x. I recently switched back after months on CM7 doing the nightly flash routine. Don't miss it a single bit.
Sent from my Nexus S 4G using Tapatalk
I don't even remember what the stock rom is like. I got cyanogen almost inmediately after getting my phone. Perhaps I'll try stock... what's the best way to go about doing this? Do i need to unroot my phone?
mokflurry said:
I don't even remember what the stock rom is like. I got cyanogen almost inmediately after getting my phone. Perhaps I'll try stock... what's the best way to go about doing this? Do i need to unroot my phone?
Click to expand...
Click to collapse
backup apps with titanium backup + factory reset (wipe data/cache/dalvik) + flash stock rom.
here you can find a great collection http://forum.xda-developers.com/showthread.php?t=1063664
you DO loose root by flashing a stock rom, but you just have to re-flash superuser (and maybe cwm if needed). I find the stock gingerbread rom very fast and reliable.
Plus, you'll receive the ICS ota when it's ready
(but you'll need to flash the stock recovery)
Wait another 2-3 weeks and flash ice cream sandwich.
Sent from my Nexus S 4G
Flash deck 1.3. Really fast stable and great battery life. Its just like stock rom with a few extra tweaks. Has some of cm7 mods without the bloat. Has toggle switches on the drop down and some status bar tweaks but very stable and like I said its close to stock. Running it with matrix 9.0. Give it try.
Sent from my Nexus S 4G using xda premium
hugo87 said:
Flash deck 1.3. Really fast stable and great battery life. Its just like stock rom with a few extra tweaks. Has some of cm7 mods without the bloat. Has toggle switches on the drop down and some status bar tweaks but very stable and like I said its close to stock. Running it with matrix 9.0. Give it try.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Where can i find this ROM? Is it there in XDA?
saranyan said:
Where can i find this ROM? Is it there in XDA?
Click to expand...
Click to collapse
Sorry man its in the nexus s 4g dev section but i cant find it on the GSM dev section. You can always try oxygen rom which is very similar to deck which I was running before I flashed deck. Has the same kind of tweaks more or less. Was also a really good rom. http://forum.xda-developers.com/showthread.php?t=1285243
give carbon a shot. it's based on oxygen but gives better performance than any rom i've used since getting this phone
http://rootzwiki.com/showthread.php?3945-ROM-Carbon-v1.0-A-Personal-Mix-AOSP
hugo87 said:
Flash deck 1.3. Really fast stable and great battery life. Its just like stock rom with a few extra tweaks. Has some of cm7 mods without the bloat. Has toggle switches on the drop down and some status bar tweaks but very stable and like I said its close to stock. Running it with matrix 9.0. Give it try.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Decks is a CM7 kang with stock launcher, renamed cyanogenmod settings, and some additional files removed.
Sent from my Xoom using xda premium
Nexus mv paired with franco kernel
Sent from my GT-P7510 using xda premium
I'd suggest NSCollab and a trinity kernel. This combo worked well for me but I caught the flashing bug since getting this Nexus S and now I'm off to try Nexus MV.
you should try superosr rom (AOSP), very fast and include CM settings as well
I've been trying all NS Roms, and I'll prefer NSCollab because,
-Fast and stable (Near 5000 in quadrant)
-Never had a random reboot
-Extremely stable at 1,2GHz
-Probably the best CM7-based ROM
I don't give a opinion about which kernel u need to use, because they are all awesome, for the highest score in Quadrant, use the Trinity TUV kernel.
But I like the Netarchy or Matr1x kernel more because they are more stable in my eyes. I hope this will give you some more information
U can also wait for ICS (IceCream Sandwich), it will be awesome too.
I'd suggest stock rom + stock kernel.
lower quadrant score but higher performance
Oxygen 2.3 with Matr1x
4097 quadrant at 1,3Ghz.
*UPDATE*
Try the Franco.Kernel, tested it, very stable and high performance.
Greets.
Matr1x all the way bud lmao
I just installed the [Kernel]CM7 [2.6.32.45] on my phone with CM7 already installed. when I turned on the device after the LG logo my screen turns black?!! What coulfd be the issue...I apologize if i come off as a idiot....
You installed what kernel???
From who?
From where?
Cm7 rom has a stock kernel, so you must have flashed a custom kernel, did you check to see if it was compatible with cm7??
Yes its this kernel [Kernel]CM7 [2.6.32.45]. I downloaded from XDA and it says its compatible with CM7. When i rebooted the G2x from CWM the LG logo showed up and then went to a black screen
Just enable USB connection and put a different kernel on ur phone and flash it. Ur phone obviously can't handle the kernel
Sent from my LG-P999 using XDA App
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
noobletsausecakebbq said:
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Which CM7 Kernels could the G2x handle fo.....Im new to the whole kernel thing & im tryna get some help & I want to get more power from my phone.
Each kernel is different for speed, battery life, experimental... so on and so on. Every chipset is different in our phones some can't handle certain kernels.
Sent from my LG-P999 using XDA Premium App
So what kernels would work on any G2x?? Thanks for the tip idk all our chip sets are different.
Sent from my LG-P999 using XDA App
Personally om using latest faux's kernel, I'm on latest nightly - cm7
http://forum.xda-developers.com/showthread.php?p=13678237
Don't forget to wipe cache, wipe dalvik cache, then flash kernel, then run fix permission, reboot, enjoy
Sent from my LG-P999 using xda premium
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
player911 said:
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
Click to expand...
Click to collapse
Thanks yall u helped out alot.............I just installed the WEAPON ROM with the FAUX Kernel & im using Pimp my CPU for OC & UC........Besides Faux what kernels would be good to use on all G2x phones?