My device is a Xolo Play tab 7.0 with Nvidia tegra 3. 1gb ram. 4.1.1 jellybean. I rooted my tablet and installed chainfire 3d and its drivers. It then rebooted. But it is at bootloop. It wont get past the boot screen. In recovery mode there is no option for factory reset or wipe data. Fastboot also shows no such options. I dont have any backup of my android and now my computer also doesnt recognize this device . Please help me. I want to reset my tablet to its original form. Is there any way??
solution
Press vol up + power,then select forced recovery,then u will see a dead android logo there press both vol up and vol down at the same time and hold it for some secs,then,recovery option will come there click factory data reset use power key to select
Related
Hi there, thanks in advance for your kind support on the overall aspects of android development.
here is what i have done.
i wanted to update my motorola xt910 with 4.0.4 ics to CM10 (CYANOGENMOD)10
So i get the cm10 rom and google apps on my sd card
And installed the clockworkmod recovery 5.8.4.5 black edition
http://forum.xda-developers.com/showthread.php?t=1751826
then i made the procedures after install the apk
after that i reboot in cwm and make a backup of the existing rom
and reboot the phone.
then i dowload the rom manager from the app store, install it and select the right recovery 3.+++ for the razr reboot the phone .
then i went on rom manager and enter in clockword mod and install the rom cm 10 (after i installed it i remember i should wipe data and cache) so i after installed cm10, i wiped data and cache, and right after i installed again the cm10 rom and google aps, without even reboot or leave rom manager app, after that i rebooted the phone and the only thing it shows me its the M logo on start.
I cant go to fastboot either, doesnt recognise the rsd lite.
And it only "boots" if its called that way if i hit power + vol up + vol down. but then it only appears the M logo for a few seconds and then the cell it turns off (i guess). it was with a fully 100% battery when i did the procedure.
Any way to solve this?
it detects when i conect it to the pc, but it doesnt show anything, only the sound that some usb thing is conected and then disconected, no card showing nothing, just the sound.
ANY HELP WILL BE GLADLY WELCOME!!!
THANKS
nuno cravo said:
Hi there, thanks in advance for your kind support on the overall aspects of android development.
here is what i have done.
i wanted to update my motorola xt910 with 4.0.4 ics to CM10 (CYANOGENMOD)10
So i get the cm10 rom and google apps on my sd card
And installed the clockworkmod recovery 5.8.4.5 black edition
http://forum.xda-developers.com/showthread.php?t=1751826
then i made the procedures after install the apk
after that i reboot in cwm and make a backup of the existing rom
and reboot the phone.
then i dowload the rom manager from the app store, install it and select the right recovery 3.+++ for the razr reboot the phone .
then i went on rom manager and enter in clockword mod and install the rom cm 10 (after i installed it i remember i should wipe data and cache) so i after installed cm10, i wiped data and cache, and right after i installed again the cm10 rom and google aps, without even reboot or leave rom manager app, after that i rebooted the phone and the only thing it shows me its the M logo on start.
I cant go to fastboot either, doesnt recognise the rsd lite.
And it only "boots" if its called that way if i hit power + vol up + vol down. but then it only appears the M logo for a few seconds and then the cell it turns off (i guess). it was with a fully 100% battery when i did the procedure.
Any way to solve this?
it detects when i conect it to the pc, but it doesnt show anything, only the sound that some usb thing is conected and then disconected, no card showing nothing, just the sound.
ANY HELP WILL BE GLADLY WELCOME!!!
THANKS
Click to expand...
Click to collapse
I have successfully manage to UNBRICK IT.
here is the procedure i have done:
1-plug it in motorola cable and put the rsdlite on
2-plug the usb on the computer (you will hear the sound of some usb beeing conected but nothing else)
3- hit the power buton + vol up + vol down several times until it appears fast boot
ex: you click it now see the M logo, and then you hit it again on power + vol up + vol down, all of this with the cable conected to the pc and the rsd lite on.
4-after it entered on fastboot mode, you will see a black screen with some white writing on it
5-get a fastboot xml of your rom (in my case brasilian one) and flash it true the rsd, wait wait wait until the process finishes and dont disconect or touch anything. In my case it took about 15 minutes with several stops and bootloops on the same procedure, but i successfully manage to bring it to life.
Note this method will only work if you have enough battery on your phone, if not try to buy a factory cable to charge the battery via USB port and then try it on.
Remember to charge 5% you will nedd to get it on the usb about 15 minuts or so, if you plan to do this procedure i will hardly advice you to leave it about 5hours to fully charge your battery and you get the job done without any other issues.
Thanks to all and i hope this thread will be helpfull to others too.
Chears
Nuno
THANKS!
Thanks ma,, you saved my device!!!!
Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
eddy2302 said:
Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
Click to expand...
Click to collapse
Try turning it off by long pressing the power button untill the screen goes off .... then follow the steps to open CWM ... press the power and volume up until Samsung Galaxy Note 10.1 logo appears then stop pressing the power and keep pressing vol up and if it fails try with another turn off ... because trying to open CWM when the samsung logo is there wont work
Try to install again but if it fails again I'd try to re-download the rom... Hope you have an sd card reader cos the note WON'T be recognised by the PC....
You could also try to do a factory reset, format system, data and sd card, remove your external card before doing this so you don't accidentally loose everything there...
ok guys, fortunatly my note woke up and decided to enter in download mode...i flash the phil touch recovery and upgraded to the v8!
Many thanks to @wolvie80 who helped me :laugh:
Cheers and thanks to the other guys who wrote there
after official ICS upgrade to my samsung GT-p6800 , power button is not working for booting up the system. So when i did the reset to factory reset the device restarted but stuck in recovery mode but i cannot select any option because power button is not working. though i can scroll through the option using volume buttons.
Experts help me how to get back my system. Though i have the firware backup.
thanks in advance
after official ICS upgrade to my samsung GT-p6800 , power button is not working for booting up the system. So when i did the reset to factory reset the device restarted but stuck in recovery mode but i cannot select any option because power button is not working. though i can scroll through the option using volume buttons.
Experts help me how to get back my system. Though i have the firware backup.
thanks in advance
Hello, I have a big problem, I have a Plum Axe Plus 2, android 6.0, I wanted to root it so I unlocked the bootloader, (just that haven't root it yet), everything was working fine until I restarted the phone and it wouldn't pass from the logo screen, so I press volume down + power button and it appeared what I think is a virus (here is the video: youtube.com/watch?v=b18iDZZi0QA, I connect it to the PC and it recognize it, I could see the storage and everything so I manage to enter the recovery mode putting the adb reboot recovery command, I reset it and well I thought everything was fine now but when I power up the phone it stay on the logo again, I tried to enter the recovery mode but the same virus pop up, I connect it to PC and I still can access the storage but now it tells me that the device is unauthorized, so what can I do? how can I get rid of that virus ? please help me, I can't afford to buy a new phone.
Update: I manage to enter the recovery mode from the fastboot menu, so I could reset the phone again, but I don't even dare to power it off or restart in fear the same happens again, what should I do?
Hi !
Perform a factory reset , any virus you`ve got , though I doubt about it , will be erased