I am trying to go back to stock and am following the guidelines listed here on xda. (http://forum.xda-developers.com/showthread.php?t=2432476)
I am having no problems except for the LG Flash tool and the dll.
First off I have ATT 32GB and I am rooted with CM 11 Nightly 30. (kitkat of course).
I've set the com port to 41, downloaded and installed the drivers and flash tool. Flash tool opens fine, but when I choose the .dll it always says, "wrong dll". No matter what. I am downloading the dll from here: http://forum.xda-developers.com/showthread.php?t=2432476
I have no idea what is happening. Any help?
What does it say in the LG flash tool?
Sent from LG-G2 D800 on AEONFLEX 4.4.2
Related
Hi, I have the ATT version d800, I installed version by .kdz the d802 and the beginning is the uncalibrated screen and you can not go where you want. I tried to re-flash the d800 but it makes me download failed device is different. I do not know what to do ...
mathius89 said:
Hi, I have the ATT version d800, I installed version by .kdz the d802 and the beginning is the uncalibrated screen and you can not go where you want. I tried to re-flash the d800 but it makes me download failed device is different. I do not know what to do ...
Click to expand...
Click to collapse
first rule of flashing:
do not flash another devices kdz
I suggest you try the dll from this rom which should ignore the model check, flash successfully and convert it back to d800
Device: F350S
Hy
My device was on Future V3.1(Lollipop). I flashed a recovery for 5.0 and installed Drake V1. All went well but model number changed to D838 . I again flashed same recovery in Drake v1 and flashed this rom http://forum.xda-developers.com/lg-g-pro-2/development/china-g3-v1-d838-t2979376. As per title it is for D838 but someone had commented that it is working fine in his F350. After flashing once i tried to boot the device it refused , after LG logo it showed security error and switched off. Recovery actions so far done by me:-
1. Downloaded latest kdz for F350S20b(Lollipop kdz since v10e is not available on web) , flashed it via LG flashtool 2014 but flashing interrupts at 2%
2. Downloaded tot and dll for v10e eidted tot using this guide http://forum.xda-developers.com/lg-...ssdl-error-t3020455/post59010479#post59010479 but it gives cross dl error.
3. Ph shows USER SO.O ASO.O B99 UHSS LG-D838 04.4.2 Hrev_10 D83810F at screen at the time of flshing tot.
I have tried all possible methods only option left is to flash D838 tot file in it . I just want to know is it safe to do so and what is going to be appropriate tot file for that. Moreover any other helpful option will be highly appreciated.
Ahmed Xperia p said:
Device: F350S
Hy
My device was on Future V3.1(Lollipop). I flashed a recovery for 5.0 and installed Drake V1. All went well but model number changed to D838 . I again flashed same recovery in Drake v1 and flashed this rom http://forum.xda-developers.com/lg-g-pro-2/development/china-g3-v1-d838-t2979376. As per title it is for D838 but someone had commented that it is working fine in his F350. After flashing once i tried to boot the device it refused , after LG logo it showed security error and switched off. Recovery actions so far done by me:-
1. Downloaded latest kdz for F350S20b(Lollipop kdz since v10e is not available on web) , flashed it via LG flashtool 2014 but flashing interrupts at 2%
2. Downloaded tot and dll for v10e eidted tot using this guide http://forum.xda-developers.com/lg-...ssdl-error-t3020455/post59010479#post59010479 but it gives cross dl error.
3. Ph shows USER SO.O ASO.O B99 UHSS LG-D838 04.4.2 Hrev_10 D83810F at screen at the time of flshing tot.
I have tried all possible methods only option left is to flash D838 tot file in it . I just want to know is it safe to do so and what is going to be appropriate tot file for that. Moreover any other helpful option will be highly appreciated.
Click to expand...
Click to collapse
Try flashing correct TOT file for your model? (without editing)
D838 - D838 TOT
F350 - F350 TOT
Finally unbricked my G pro 2
editing tot was not doing the job , i downloaded latest kdz for my device and tried to install it but installation did not get past 2%. Finally i edited kdz using hex editor and changed F350S with D838. Flashed using Lg flashtool 2014 without connecting to internet and voila.
Ahmed Xperia p said:
Finally unbricked my G pro 2
editing tot was not doing the job , i downloaded latest kdz for my device and tried to install it but installation did not get past 2%. Finally i edited kdz using hex editor and changed F350S with D838. Flashed using Lg flashtool 2014 without connecting to internet and voila.
Click to expand...
Click to collapse
and phone done or not done.>?
i can help you fix cross dll
tungkick said:
and phone done or not done.>?
i can help you fix cross dll
Click to expand...
Click to collapse
I've unbricked but still your guidance will be appreciated
Sent from my LG-D838 using XDA Free mobile app
my d850 att is fully erased when i go to twrp and boot it it says i have no os I've tried everything possible i need help
i faced almost the same problem when i flashed miui 7... it changed my phone's name to " optimus g pro 2 " and when i try to flash kdz it stuck at 2%.. and when i tried to flash tot with flash tools it said different model.. so i used build prop editor to change my phone's name and every thing went well..
The phone: LG G2 D801 TMo
Rom: Simple Rom V1.1
Android: 5.0.1
Problem:
I cross loaded a D802 Rom onto my D801 and bricked it into Fastboot mode.
I was able to get it into Download mode but now I'm stuck.
I can't Revert from 5.0.1 to 4.4.2 through a .TOT or .KDZ flash. The phone is reading that its a D802 and it's not...
I've spent the better part of 18 hours trying to fix this now by scowering the forums with no luck.
What do I do, I'm not trying to get a new phone right now and because it's in download mode I feel like there's hope.
The flashes keep failing. TOT fails because it says i'm trying to flash D801 on a D802 and a KDZ flash fails at 3% with a disconnect and no reconnection.
Any help is appreciated.
What driver and OS are you using? I keep getting a getting Android device in Windows and no recognizable device connection for anything across all tools.
deadsky671 said:
The phone: LG G2 D801 TMo
Rom: Simple Rom V1.1
Android: 5.0.1
Problem:
I cross loaded a D802 Rom onto my D801 and bricked it into Fastboot mode.
Any help is appreciated.
Click to expand...
Click to collapse
I did the same thing but I can't get into fastboot. Nothing has helped me either.
If you can get into fastboot, flash aboot, boot, laf and recovery for the d801 and you should be able to then install using a kdz file
I had the same problem but finally got it back following this guide:
http://forum.xda-developers.com/showthread.php?t=2432476
Use the tot method and I had to use the alternate DLL.
Ive tried lg flash tool with dll file and the right d800 tot 4.2.2 but everytime i try to flash now it says your device is model d802 what can i do? Im also rooted. I flashed that zen rom and its for d802 but i thought in aroma i could change it the right version
I am using LG L Bello D331 on Android 4.4.2 KitKat and D331 got no OTA software updates unlike other versions of basically the same phone (I heard D335 ROM works when flashed on D331).
I was wondering if there is a way to flash the 5.0.1 LG ROM without PC (my phone is already rooted via KingRoot).
P.S I'm a newbie and I never flashed anything before.
Hey! You must do it on PC. I did it just yesterday, here's how i've done it
You'll need two things:
-Stock firmware (.kdz file) you can find them here: https://lg-firmwares.com/lg-d331-firmwares/firmwares/
(just download the CIS region file, I downloaded it too :good
-Lg Flash Tool: https://forum.xda-developers.com/showthread.php?t=2797190
-Also Lg drivers but i think you already have them
After you downloaded the kdz file, open Lg flash tool and connect your phone to pc via usb.
Change phone mode to emergency, select the kdz and choose CSE flash (this will erase all your data so do backup first)
On the new windows choose start, choose langauge and here you go. Afyer 20-30 min you will be done.
Good luck!