Hi, I have the ATT version d800, I installed version by .kdz the d802 and the beginning is the uncalibrated screen and you can not go where you want. I tried to re-flash the d800 but it makes me download failed device is different. I do not know what to do ...
mathius89 said:
Hi, I have the ATT version d800, I installed version by .kdz the d802 and the beginning is the uncalibrated screen and you can not go where you want. I tried to re-flash the d800 but it makes me download failed device is different. I do not know what to do ...
Click to expand...
Click to collapse
first rule of flashing:
do not flash another devices kdz
I suggest you try the dll from this rom which should ignore the model check, flash successfully and convert it back to d800
Related
I don't understand these directions from the FAQ:
"Q. How to get back to stock? I need to give my phone to warranty services how do I revert to official LG rom?
A. Check this thread. It is the v10b 2.2 stock rom as a flashable zip package. If you can't access the recovery, then see if the firmware for your country is available here or use this tool. Download the firmware and use the KDZ tool to flash. You will find instructions to use the KDZ tool on this thread. For a picture guide, check this thread.
Also for official GB lovers, see this and this. It is a v20g rom in flashable zip package. Or if you'd rather flash v20c/g roms from LGMDP, the links for that can be found in this thread.
If you are on Optimus V, see http://forum.xda-developers.com/show....php?t=1025911
If you are on the Optimus T, see this post. Uses the KDZ method.
Q. How do I restore the stock recovery?
A. Download the original recovery zip file from here and flash it. (Yes, you can flash a recovery from within recovery itself)"
I have LG P500 from USA T-Mobile. I'm on V20 Baseband.
1)Is kdz the only way to go back to stock?
2)Which way is the safer and better way to get back to stock?
3)How (full instructions) to get back to stock rom for USA T-Mobile?
4)How (full instructions) to get back to stock recovery for USA T-Mobile?
yes you can flash a recovery from recovery, if it is a flashable zip
you need to stick with your phone not other variants of LG p500, O-1(Europe), O-T or O-V, dunno what is the T-mobile USA version, but is it written inside your phone under battery
1) KDZ is for flashing software in your phone, but beware, if you are unexperienced you may brick your phone for good, but you can try it, DO NOT PULL OUT BATTERY OR DO SOMETHING WHILE KDZ IS NOT FINISHED FLASHING PHONE OR YOU WILL HARDBRICK IT (but, I do not think someone at service will notice that, after a hardbrick, it just went dead and nothing else, nobody knows nothing)
2)if you do not know what are you doing, nothing is safe, anyway, as I mentioned, a hardbrick is a hardbrick and if you still have warranty, you are lucky
3)http://forum.xda-developers.com/showthread.php?t=1824618 search there
4) LG P500 doesn't have stock recovery(just bootloader)
if you do not know what to flash try to find a T-mobile rom image (MAKE A REQUEST-someone will post it), and first time when flashing a recovery is to backup original rom for what will come after
LGMDP will work like this, it upgrades rom when you have an older version, so try to flash an older custom rom, find an Froyo 2.2 and flash it as any custom rom, boot, conect your phone to PC, that means that you have LG USB drivers installed, start LGMDP and w8 to detect your phone, after that goto options & help, select country, carrier, phone, w8 to detect latest update, start update
in case that your phone is not detected, boot into recovery, goto mounts and mount USB, that will make LGMDP detect your phone, start updating
androiddownloader said:
I don't understand these directions from the FAQ:
"Q. How to get back to stock? I need to give my phone to warranty services how do I revert to official LG rom?
A. Check this thread. It is the v10b 2.2 stock rom as a flashable zip package. If you can't access the recovery, then see if the firmware for your country is available here or use this tool. Download the firmware and use the KDZ tool to flash. You will find instructions to use the KDZ tool on this thread. For a picture guide, check this thread.
Also for official GB lovers, see this and this. It is a v20g rom in flashable zip package. Or if you'd rather flash v20c/g roms from LGMDP, the links for that can be found in this thread.
If you are on Optimus V, see http://forum.xda-developers.com/show....php?t=1025911
If you are on the Optimus T, see this post. Uses the KDZ method.
Q. How do I restore the stock recovery?
A. Download the original recovery zip file from here and flash it. (Yes, you can flash a recovery from within recovery itself)"
I have LG P500 from USA T-Mobile. I'm on V20 Baseband.
1)Is kdz the only way to go back to stock?
2)Which way is the safer and better way to get back to stock?
3)How (full instructions) to get back to stock rom for USA T-Mobile?
4)How (full instructions) to get back to stock recovery for USA T-Mobile?
Click to expand...
Click to collapse
KDZ is generally discouraged . However if you can find a Nandroid back up of GB , then that would be the safest way . I went back to stock froyo with the help of this thread - http://forum.xda-developers.com/showthread.php?t=1955354
sarans1987 said:
KDZ is generally discouraged . However if you can find a Nandroid back up of GB , then that would be the safest way . I went back to stock froyo with the help of this thread - http://forum.xda-developers.com/showthread.php?t=1955354
Click to expand...
Click to collapse
Thank you, i can just use that other download on the thread if i have the new baseband right? and what about removing cwm? or restoring stock recovery even though there wasnt before
androiddownloader said:
Thank you, i can just use that other download on the thread if i have the new baseband right? and what about removing cwm? or restoring stock recovery even though there wasnt before
Click to expand...
Click to collapse
Your have V20 that is new baseband so any rom from GingerBread onwards is good for you . Stock recovery can be flashed sitting right from custom recovery . Check out this thread for custom recovery and ROM of 2.3.3 - http://forum.xda-developers.com/showthread.php?t=1309744 . If you wanna try lgmdp look at this - http://forum.xda-developers.com/showthread.php?t=1324105
Device: F350S
Hy
My device was on Future V3.1(Lollipop). I flashed a recovery for 5.0 and installed Drake V1. All went well but model number changed to D838 . I again flashed same recovery in Drake v1 and flashed this rom http://forum.xda-developers.com/lg-g-pro-2/development/china-g3-v1-d838-t2979376. As per title it is for D838 but someone had commented that it is working fine in his F350. After flashing once i tried to boot the device it refused , after LG logo it showed security error and switched off. Recovery actions so far done by me:-
1. Downloaded latest kdz for F350S20b(Lollipop kdz since v10e is not available on web) , flashed it via LG flashtool 2014 but flashing interrupts at 2%
2. Downloaded tot and dll for v10e eidted tot using this guide http://forum.xda-developers.com/lg-...ssdl-error-t3020455/post59010479#post59010479 but it gives cross dl error.
3. Ph shows USER SO.O ASO.O B99 UHSS LG-D838 04.4.2 Hrev_10 D83810F at screen at the time of flshing tot.
I have tried all possible methods only option left is to flash D838 tot file in it . I just want to know is it safe to do so and what is going to be appropriate tot file for that. Moreover any other helpful option will be highly appreciated.
Ahmed Xperia p said:
Device: F350S
Hy
My device was on Future V3.1(Lollipop). I flashed a recovery for 5.0 and installed Drake V1. All went well but model number changed to D838 . I again flashed same recovery in Drake v1 and flashed this rom http://forum.xda-developers.com/lg-g-pro-2/development/china-g3-v1-d838-t2979376. As per title it is for D838 but someone had commented that it is working fine in his F350. After flashing once i tried to boot the device it refused , after LG logo it showed security error and switched off. Recovery actions so far done by me:-
1. Downloaded latest kdz for F350S20b(Lollipop kdz since v10e is not available on web) , flashed it via LG flashtool 2014 but flashing interrupts at 2%
2. Downloaded tot and dll for v10e eidted tot using this guide http://forum.xda-developers.com/lg-...ssdl-error-t3020455/post59010479#post59010479 but it gives cross dl error.
3. Ph shows USER SO.O ASO.O B99 UHSS LG-D838 04.4.2 Hrev_10 D83810F at screen at the time of flshing tot.
I have tried all possible methods only option left is to flash D838 tot file in it . I just want to know is it safe to do so and what is going to be appropriate tot file for that. Moreover any other helpful option will be highly appreciated.
Click to expand...
Click to collapse
Try flashing correct TOT file for your model? (without editing)
D838 - D838 TOT
F350 - F350 TOT
Finally unbricked my G pro 2
editing tot was not doing the job , i downloaded latest kdz for my device and tried to install it but installation did not get past 2%. Finally i edited kdz using hex editor and changed F350S with D838. Flashed using Lg flashtool 2014 without connecting to internet and voila.
Ahmed Xperia p said:
Finally unbricked my G pro 2
editing tot was not doing the job , i downloaded latest kdz for my device and tried to install it but installation did not get past 2%. Finally i edited kdz using hex editor and changed F350S with D838. Flashed using Lg flashtool 2014 without connecting to internet and voila.
Click to expand...
Click to collapse
and phone done or not done.>?
i can help you fix cross dll
tungkick said:
and phone done or not done.>?
i can help you fix cross dll
Click to expand...
Click to collapse
I've unbricked but still your guidance will be appreciated
Sent from my LG-D838 using XDA Free mobile app
my d850 att is fully erased when i go to twrp and boot it it says i have no os I've tried everything possible i need help
i faced almost the same problem when i flashed miui 7... it changed my phone's name to " optimus g pro 2 " and when i try to flash kdz it stuck at 2%.. and when i tried to flash tot with flash tools it said different model.. so i used build prop editor to change my phone's name and every thing went well..
The phone: LG G2 D801 TMo
Rom: Simple Rom V1.1
Android: 5.0.1
Problem:
I cross loaded a D802 Rom onto my D801 and bricked it into Fastboot mode.
I was able to get it into Download mode but now I'm stuck.
I can't Revert from 5.0.1 to 4.4.2 through a .TOT or .KDZ flash. The phone is reading that its a D802 and it's not...
I've spent the better part of 18 hours trying to fix this now by scowering the forums with no luck.
What do I do, I'm not trying to get a new phone right now and because it's in download mode I feel like there's hope.
The flashes keep failing. TOT fails because it says i'm trying to flash D801 on a D802 and a KDZ flash fails at 3% with a disconnect and no reconnection.
Any help is appreciated.
What driver and OS are you using? I keep getting a getting Android device in Windows and no recognizable device connection for anything across all tools.
deadsky671 said:
The phone: LG G2 D801 TMo
Rom: Simple Rom V1.1
Android: 5.0.1
Problem:
I cross loaded a D802 Rom onto my D801 and bricked it into Fastboot mode.
Any help is appreciated.
Click to expand...
Click to collapse
I did the same thing but I can't get into fastboot. Nothing has helped me either.
If you can get into fastboot, flash aboot, boot, laf and recovery for the d801 and you should be able to then install using a kdz file
I had the same problem but finally got it back following this guide:
http://forum.xda-developers.com/showthread.php?t=2432476
Use the tot method and I had to use the alternate DLL.
I have a D800, recently unbricked by shorting pins, and i have managed to install TWRP and download mode is working. I can't run any rom. I need to flash a KDZ through download mode.
But all the KDZ are of 10a/10b etc , does any body know where I can find a 30x KDZ or how to upgrade without flashing numerous FOTAs?
or will my phone boot up if i install http://forum.xda-developers.com/devdb/project/dl/?id=13450? i think not, but still need to know.
ipatel said:
I have a D800, recently unbricked by shorting pins, and i have managed to install TWRP and download mode is working. I can't run any rom. I need to flash a KDZ through download mode.
But all the KDZ are of 10a/10b etc , does any body know where I can find a 30x KDZ or how to upgrade without flashing numerous FOTAs?
or will my phone boot up if i install http://forum.xda-developers.com/devdb/project/dl/?id=13450? i think not, but still need to know.
Click to expand...
Click to collapse
The AT&T D800 uses a TOT file to flash back to stock. Are you in the right section? If you have a D800 you can use this to go back to KK and it's just one FOTA thru AT&T to go to LP. http://forum.xda-developers.com/showthread.php?t=2663369
Ive tried lg flash tool with dll file and the right d800 tot 4.2.2 but everytime i try to flash now it says your device is model d802 what can i do? Im also rooted. I flashed that zen rom and its for d802 but i thought in aroma i could change it the right version