Database Info

[Q] ROM Installation Aborted

hi there, i've met some problem when i was flashing the avatar ROM from here..
it states that my installation was aborted due to the error in/sdcard/Avatar+ROm.zip as in the attachment below
what should i do to solve this problem?

Have you changed your model, device, etc name in the build.prop... If yes, change all that to GT-I9003 and then flash the rom...
Sent from my GT-I9003

Have you done a factory reset?
Sent from my GT-I9003 using xda app-developers app

CrabNN said:
hi there, i've met some problem when i was flashing the avatar ROM from here..
it states that my installation was aborted due to the error in/sdcard/Avatar+ROm.zip as in the attachment below
what should i do to solve this problem?
Click to expand...
Click to collapse
my dear friend, lucky of you, the rom have noob proof programmed.
the rom is for CM10 of Android 4.1.2.
read the every thing is the OP and understand it before you try to flash anything.
you picture show you have Amit's universal CF-ROOT CWM, but the CM10 is using Dhriu build with version 6.
Procedure
(1) Wipe data/Factory reset
(2) Wipe Cache
(3) Flash CM10 Alpha 4
(4) After flashing CM10 A4, Flash gapps and restart & leave the phone for 5mins
(5) After that reboot in recovery again and flash Avatar Rom
(6) After flashing ROM flash gapps And reboot...

Ashish Lahare said:
Have you changed your model, device, etc name in the build.prop... If yes, change all that to GT-I9003 and then flash the rom...
Sent from my GT-I9003
Click to expand...
Click to collapse
nope, what i did were just wiping the data(factory reset) and the cache..
Alvarro said:
Have you done a factory reset?
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
yup, i did @@

chongns said:
my dear friend, lucky of you, the rom have noob proof programmed.
the rom is for CM10 of Android 4.1.2.
read the every thing is the OP and understand it before you try to flash anything.
you picture show you have Amit's universal CF-ROOT CWM, but the CM10 is using Dhriu build with version 6.
Procedure
(1) Wipe data/Factory reset
(2) Wipe Cache
(3) Flash CM10 Alpha 4
(4) After flashing CM10 A4, Flash gapps and restart & leave the phone for 5mins
(5) After that reboot in recovery again and flash Avatar Rom
(6) After flashing ROM flash gapps And reboot...
Click to expand...
Click to collapse
thx for the procedure bro. i'm new on these. appreciate that! =D

CrabNN said:
thx for the procedure bro. i'm new on these. appreciate that! =D
Click to expand...
Click to collapse
errr... the procedure is stated down that rom thread

chongns said:
errr... the procedure is stated down that rom thread
Click to expand...
Click to collapse
LOL i didnt notice that ><
anyway, which gapps from this link should i use?
goo.im/gapps
for 10.1.x or for 10.0.x ?

Problem with installing Kernels

I tried to install different kernels like Pandora, Jarvis, Cranium, Linux, Aries.. individually. all those after flashing will reboot and stuck at htc screen..
I tried with sd partition of 1gb and 2gb ..tried in CM10.2 weekly build, CM10.1, Flyrom, Sense 5 EX , MIUI v5, v4 roms... nothing is working..
Please help !

wats ur problem explain it properly

vijnathin said:
wats ur problem explain it properly
Click to expand...
Click to collapse
after flashing the kernel and rebooting the phone, it restarts and stucks at htc screen.
same problem with all the kernels..
thats it

123arunkumar said:
after flashing the kernel and rebooting the phone, it restarts and stucks at htc screen.
same problem with all the kernels..
thats it
Click to expand...
Click to collapse
k bro tell me which rom u wanna use and the kernel too , i will provide u the steps for proper installation without bootloop

vijnathin said:
k bro tell me which rom u wanna use and the kernel too , i will provide u the steps for proper installation without bootloop
Click to expand...
Click to collapse
Sense 5 ex rom and jarvis kernel or pandora or aries..
thanks in advance

123arunkumar said:
Sense 5 ex rom and jarvis kernel or pandora or aries..
thanks in advance
Click to expand...
Click to collapse
sorry bro u cant use those kernel on sense 5 roms

vijnathin said:
sorry bro u cant use those kernel on sense 5 roms
Click to expand...
Click to collapse
ok bro then for cm10.2 weeklies ?

123arunkumar said:
ok bro then for cm10.2 weeklies ?
Click to expand...
Click to collapse
ya u can use jarvis kernel or aries kernel it works pretty fine over there

vijnathin said:
ya u can use jarvis kernel or aries kernel it works pretty fine over there
Click to expand...
Click to collapse
I already tried jarvis kernel and aries kernel in cm10.2 weekly bro..but at htc screen it is stucking for both the kernels

123arunkumar said:
I already tried jarvis kernel and aries kernel in cm10.2 weekly bro..but at htc screen it is stucking for both the kernels
Click to expand...
Click to collapse
Have you made a 3rd Cache partition (65 MB Ext4) ?
And btw. did you tried a jarvis kernel 3.5 ? Cause in this version is default freq only 600 MHz. Your Pico might not handle the 878 MHz how it is set in other kernels
(Sorry for my english, I´m Czech)

make three partion using cute prince method , sd data and sd cache it will work perfect

XTheMike said:
Have you made a 3rd Cache partition (65 MB Ext4) ?
And btw. did you tried a jarvis kernel 3.5 ? Cause in this version is default freq only 600 MHz. Your Pico might not handle the 878 MHz how it is set in other kernels
(Sorry for my english, I´m Czech)
Click to expand...
Click to collapse
vijnathin said:
make three partion using cute prince method , sd data and sd cache it will work perfect
Click to expand...
Click to collapse
ohh no no..i didnt do 3rd patition..i thought that only one partition is enough and created 1gb ext3 and tried..
thanks for the solution..and is that necessary for each and every kernel to make 3rd partition or are there any kernels which doesnt need 3rd partition?? i dont know properly how to make 3rd partition !

123arunkumar said:
ohh no no..i didnt do 3rd patition..i thought that only one partition is enough and created 1gb ext3 and tried..
thanks for the solution..and is that necessary for each and every kernel to make 3rd partition or are there any kernels which doesnt need 3rd partition?? i dont know properly how to make 3rd partition !
Click to expand...
Click to collapse
its necessary bro use mini tool partition wizard app in ur pc and connect ur sd card via card reader , so that u can create the third partition . Try using Ext4 partition.( use aries kernel V3.5 now bcz jarvis strucks in boot loop)

vijnathin said:
its necessary bro use mini tool partition wizard app in ur pc and connect ur sd card via card reader , so that u can create the third partition . Try using Ext4 partition.( use aries kernel V3.5 now bcz jarvis strucks in boot loop)
Click to expand...
Click to collapse
fine..thanks man

123arunkumar said:
fine..thanks man
Click to expand...
Click to collapse
yup cool enjoy pico

switching over to a different rom

I want to switch from cyanogen mod 10.3 to PAC MAN rom...
Is a data/factory reset compulsory?

arckingpin said:
I want to switch from cyanogen mod 10.3 to PAC MAN rom...
Is a data/factory reset compulsory?
Click to expand...
Click to collapse
Wipe everything using the option in your recovery. Always wipe when you switch roms, unless otherwise instructed by the rom's dev.
Sent from my SGH-M919 using xda app-developers app

arckingpin said:
I want to switch from cyanogen mod 10.3 to PAC MAN rom...
Is a data/factory reset compulsory?
Click to expand...
Click to collapse
keep this thing in mind that while changing roms the following things should be wipped
1 cache partition
2 dalvik cache
2 factory reset
things which should be formatted
1 system
2 data
3 cache
4 sd-ext{not sd-card} format sd-ext only if you use ext partition
good luck
try aokp rom for tab 2 it is also a good option
good luck:good::good:

aditya rathee said:
keep this thing in mind that while changing roms the following things should be wipped
1 cache partition
2 dalvik cache
2 factory reset
things which should be formatted
1 system
2 data
3 cache
4 sd-ext{not sd-card} format sd-ext only if you use ext partition
good luck
try aokp rom for tab 2 it is also a good option
good luck:good::good:
Click to expand...
Click to collapse
Thanx a lot!!
it really helped..
earlier i tried to avoid a factory reset and was getting stuck in a bootloop......(i avoided factory reset because it was not mentioned on the site from where i downloaded and i guessed since pac rom is based on CM rom it might not be needed...)
After factory all is working fine ......
But i am not really this rom so i m gonna try AOKP as u suggested...

arckingpin said:
Thanx a lot!!
it really helped..
earlier i tried to avoid a factory reset and was getting stuck in a bootloop......(i avoided factory reset because it was not mentioned on the site from where i downloaded and i guessed since pac rom is based on CM rom it might not be needed...)
After factory all is working fine ......
But i am not really this rom so i m gonna try AOKP as u suggested...
Click to expand...
Click to collapse
you can also try rom of xperia flavor it is also good

aditya rathee said:
you can also try rom of xperia flavor it is also good
Click to expand...
Click to collapse
Can u recommend any custum kernel with overclocking support for my P3110???

arckingpin said:
Can u recommend any custum kernel with overclocking support for my P3110???
Click to expand...
Click to collapse
i will tell you about that cos i dont use custom kernel
but i will help
try agni kernel { i cant write the exact name but i think you can find it is like what i typed}

aditya rathee said:
i will tell you about that cos i dont use custom kernel
but i will help
try agni kernel { i cant write the exact name but i think you can find it is like what i typed}
Click to expand...
Click to collapse
will agni kernel work on 4.2.2 france version

Mohdsultan said:
will agni kernel work on 4.2.2 france version
Click to expand...
Click to collapse
I think it will work but please see its compatibility before flashing it
good luck:good:

[Q][ROM][JB 4.2.x] *** Suvi ROM V16 - AURA ***

Why I cannot install this rom in my qmobile noir a10? I have QMobile Noir A10 JB 4.1 with kernal version 3.4.0. It stucks on delete cache during installation????help me
REGARDS,

DHOOM4519 said:
Why I cannot install this rom in my qmobile noir a10? I have QMobile Noir A10 JB 4.1 with kernal version 3.4.0. It stucks on delete cache during installation????help me
REGARDS,
Click to expand...
Click to collapse
Did you follow procedure as provided by developer?
there was a note in instruction...did u flash the kernel before flashing rom? & did u add the boot.img in zip file?
maybe it cause problem in flashing
Or else
you need to install latest cwm or twrp recovery which supports ur phone

sdkzone said:
Did you follow procedure as provided by developer?
there was a note in instruction...did u flash the kernel before flashing rom? & did u add the boot.img in zip file?
maybe it cause problem in flashing
Or else
you need to install latest cwm or twrp recovery which supports ur phone
Click to expand...
Click to collapse
Dear thanx for replying. Same problem is happaned with me when i try to flash LegoIce Fusion V2/V1.i flashed 4.2 kernal and added the boot.img also.

DHOOM4519 said:
Dear thanx for replying. Same problem is happaned with me when i try to flash LegoIce Fusion V2/V1.i flashed 4.2 kernal and added the boot.img also.
Click to expand...
Click to collapse
Try to flash kernel linux 3.4.x ... x like 67 or 70... they both kernel suits for legolce fusion rom then wipe data, cache & dalvik cache then flash the rom.

sdkzone said:
Try to flash kernel linux 3.4.x ... x like 67 or 70... they both kernel suits for legolce fusion rom then wipe data, cache & dalvik cache then flash the rom.
Click to expand...
Click to collapse
Dear this procedure also did not work for me....:silly:

DHOOM4519 said:
Dear this procedure also did not work for me....:silly:
Click to expand...
Click to collapse
ok let me check..... now i downloading rom then i give u suggestion...please wait

DHOOM4519 said:
Dear this procedure also did not work for me....:silly:
Click to expand...
Click to collapse
bro rom is work great. prob not found, very easy installation n its very stable after patching launcher......i think there was a prob in download please re-download the rom, add uboot.img in zip file & flash it again. before flashing rom flash the kernel ver.3.4.67 from any mmx kernel dev then wipe data, cache & dalvik cache. it works for me.
if u r using cwm & the prob is still there then change the recovery version of cwm or change the recovery. i'm using twrp recovery.

sdkzone said:
bro rom is work great. prob not found, very easy installation n its very stable after patching launcher......i think there was a prob in download please re-download the rom, add uboot.img in zip file & flash it again. before flashing rom flash the kernel ver.3.4.67 from any mmx kernel dev then wipe data, cache & dalvik cache. it works for me.
if u r using cwm & the prob is still there then change the recovery version of cwm or change the recovery. i'm using twrp recovery.
Click to expand...
Click to collapse
Dear this time i installed the rom.But the problem is that is stucks on Canvas 2 Superfone Logo.

DHOOM4519 said:
Dear this time i installed the rom.But the problem is that is stucks on Canvas 2 Superfone Logo.
Click to expand...
Click to collapse
Bro Did u wipe data, cache & dalvik cache in recovery before flashing rom?

sdkzone said:
Bro Did u wipe data, cache & dalvik cache in recovery before flashing rom?
Click to expand...
Click to collapse
Yes Bro.I installed [4.2.2] Nestle_KitKat (KitKat Interface) Rom today.It has also a problem that Rear Camera is not working.

DHOOM4519 said:
Yes Bro.I installed [4.2.2] Nestle_KitKat (KitKat Interface) Rom today.It has also a problem that Rear Camera is not working.
Click to expand...
Click to collapse
what the actual prob occur in cam?
or else
Sorry bro, i can't help u in this rom. cos there no any post or rom named "[4.2.2] Nestle_KitKat" is exists in our xda forum. or u have a link then pm me i will check it soon.

DHOOM4519 said:
Yes Bro.I installed [4.2.2] Nestle_KitKat (KitKat Interface) Rom today.It has also a problem that Rear Camera is not working.
Click to expand...
Click to collapse
hey bro, Cam is working perfect on my phone? what the actual problem in ur cam? any popup or message appear? please describe complete prob

No service on all sims
plz help I am nt receiving signals on my sim cards
those sim cards are working on my other phones

Saami Wally said:
plz help I am nt receiving signals on my sim cards
those sim cards are working on my other phones
Click to expand...
Click to collapse
try other roms. if it doesnt work then maybe u lost ur imei no

imei is there
Recognized Noob said:
try other roms. if it doesnt work then maybe u lost ur imei no
Click to expand...
Click to collapse
IMEI is there

Saami Wally said:
IMEI is there
Click to expand...
Click to collapse
happened to me once. try rebooting. wiping cache just in case. and try checking sim is fitted properly. also toggle sim on and off.

Please help me

I flashed the paranoid android rom for the boost mobile variant. It shows boot logo but doesnt boot into the rom. Please help.

ExcaliburEX said:
I flashed the paranoid android rom for the boost mobile variant. It shows boot logo but doesnt boot into the rom. Please help.
Click to expand...
Click to collapse
U sure u flashed the correct gapps file..also try n format system also before flashing

Ok
KVCmoto said:
U sure u flashed the correct gapps file..also try n format system also before flashing
Click to expand...
Click to collapse
Trying now...

KVCmoto said:
U sure u flashed the correct gapps file..also try n format system also before flashing
Click to expand...
Click to collapse
Still not booting into rom. What do I do?!

ExcaliburEX said:
Still not booting into rom. What do I do?!
Click to expand...
Click to collapse
Can u provide the link of the ROM u were trying to install?

KVCmoto said:
Can u provide the link of the ROM u were trying to install?
Click to expand...
Click to collapse
It is the Paranoid Android 4.4 release.
http://forum.xda-developers.com/showthread.php?t=2614690&page=1

ExcaliburEX said:
It is the Paranoid Android 4.4 release.
http://forum.xda-developers.com/showthread.php?t=2614690&page=1
Click to expand...
Click to collapse
Can't try it on my device since I have dual Sim variant...currently unsupported..well...clear data/cache,cache,dalvik cache n format system before flashing..specified this since it wasn't specified in the installation instructions