So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Me too bro....
Jur13n said:
So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Click to expand...
Click to collapse
Yeah Bro I have this exact problem, except i made a backup and my wifi is working fine now. One thing tho i cannot connect to google servers and when i boot up it says inconsistent UID's device may not work properly format your data partition(formatted it and yah nothing)
cated resionit
Jur13n said:
So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Click to expand...
Click to collapse
For no-wifi problem try to flash the rom from page 9 in repack thread. Work for me.
Hi, this is the first android device I have played with so naturally I managed to mess it up.
The problem is with an Iconia A510, wrong forum but didnt find a Q&A for A510 so I tried here instead.
I rooted and installed CWM recovery. The custom firmware I have tried or stopped during boot and rebooted the device. Booted for 10-20 seconds, I see the animated logos before it reboots.
I upgrade with:
wipe data/factory reset
wipe cache
advanced -> format /system
advanced -> format /data
advanced -> format /cache
install zip from sdcard -> external sdcard
Am I doing something wrong with the upgrade? Can I upgrade CWM from inside CWM so I can try the latest Android version? Is there a firmware version that will work?
Info:
Files from: acer shreps fr
CWM version: CWM Recovery v6.0.1.9 by NoThrills for A510 tablets. Apparently can try KitKat with it, so only tried older Android.
All installed OK but stopped during boot:
7comp-JB-a510-Nightly-20130808
aokp_a510_jb-mr2_unofficial_2013-12-05
cm-10.1.3-20130925-UNOFFICIAL-a510
cm-10.2-20130826-UNOFFICIAL-a510
cm-10.2.1-20140201-UNOFFICIAL-a510
pa_a510-4.1-BETA2-20140315
did you try to wipe data or/and dalvik cache after you installed the rom? (DONT WIPE SYSTEM!)
sometimes this will work for me.
graafschap101 said:
did you try to wipe data or/and dalvik cache after you installed the rom? (DONT WIPE SYSTEM!)
sometimes this will work for me.
Click to expand...
Click to collapse
Thanks for the tip. I tried wiping the usual suspects, flashing a CM rom and then flash data and dalvik cache. Same thing; started booting, the CM logo comes up and starts spinning before it freezes and reboots.
I'll play around a bit more. Tried the 'fix permissions' in CWM recovery, no go.
Solved it. Formatted everything except external_sdcard, flashed with AOKP and booted fine. Magic!
Hi Guys, Need some help please!
My P3100 had CM11 on it, and one day it stopped booting, was stuck in the Samsung logo. I got into recovery, did a factory reset\cache and dalvik wipe, but has not helped. I got into the Download mode and tried flashing the stock firmware. Odin takes 92 minutes to complete this process, and I can see "PASS" displayed, but tab still stuck in Samsung logo. Infact, when I reboot to recovery after flashing Stock rom, it still takes me the CWM recovery, while I expected to get into Stock recovery. I have also tried flashing TWRP recovery, I get a Pass message, but takes me to CWM recovery again. I have tried flashing custom ROMs from this recovery, dont get any error, but tab still wont go past the Samsung Logo. Out of ideas now, please help!
Boot into Recovery
- wipe data factory reset
- wipe cache
- wipe dalvic cache
- format system
- flash new ROM (if you flash stock ROM CWM/TWRP recovery will be overwritten during first boot)
I have tried that. Several times. The CWM recovery seems to be permanently stuck to the tab. Even if I flash twrp recovery, the flash is successful, but I go back to CWM recovery.
My Moto G, model XT1032 is stuck in a CM12 bootloop. I can boot into fastboot mode and ClockWorkMod Recovery.
So far I have tried re-flashing the CM12 ROM with no success, I have downloaded the original firmware and tried to flash that but I get a "Preflash Validation Failed" error, my phone won't show up on RSD, and I have tried wiping the phone to it's factory setting.
None of these worked and I am out of ideas. Are there any other options to try?
Thanks.
Did you ever have the GPE ROM on your phone? Does your data partition uses f2fs?
If you are getting the validation error when flashing motoboot.img, that is because your current bootloader is newer than the bootloader you are trying to flash.
Hi, I'm fairly certain I had the GPE ROM on it. It was what it came shipped with, that is all I know. As for the data partition I am unsure of the format of it, how would I go about finding this information?
Thanks.
If it has the GPE ROM, it would not use f2fs for data. Do you have twrp on it? If you do, boot into twrp, advanced wipe, and check partition info.
I do not have twrp, I have ClockWorkMod. How do I check the partition on this?
In CWM, go to wipe & format options, custom format options, toggle f2fs<->ext4 migration. Then wipe data, cache, Dalvik, and reboot.
I don't have those options on my CWM, All I have is Reboot, Install Zip, Wipe Data/Factory Reset, Wipe Cache Partition, Backup and Restore, Mounts and storage and advanced. I am using version 6.0.4.6 of CWM.
Install the latest version of Philz Touch for your phone.
Okay, I did that and now my device hangs at the Motorola Bootloader Unlocked Warning screen. Should I flash a new ROM such as CM or try again with the motoboot?
I would do a full wipe and re-install to see what happens.
It's just gone back into the CM boot loop where it hangs at the pulsing CM logo. Should I try a different version of CM that is more stable?
RyanVadera said:
It's just gone back into the CM boot loop where it hangs at the pulsing CM logo. Should I try a different version of CM that is more stable?
Click to expand...
Click to collapse
I'm running the latest CM12 on my xt1032 with no problem.
You may need to flash back to stock 4.4.4, re-install Philz, and them CM12.
The partition layout on the GPE ROM is different than the partition layout on the stock.
Do you know where I can find the stock 4.4.4 file? I can't seem to locate one?
Try here: http://motofirmware.center/files/category/26-falcon/
Thanks, I got 4.4.2 running fine. Any advice on how to avoid getting stuck in another bootloop when I try to re-flash CM12?
Install the latest Philz, create a backup, then flash a ROM of your choice. To be safe, do a full wipe, including system, but not internal storage, before and after the ROM was been flashed.
Okay, Thanks for all your help.
So it all worked? I hope it did.
I'm afraid to say it did not work, It just went back into the boot loop.
How about flashing stock 4.4.4 or ota to the latest stock before flashing cm.
Are you flashing the cm for your phone?
5After installation of the image i when to the recovery to check if everything went well and after it i wipe cache and dalvik then restart system. Now is looping into recovery. Any help TIA.
EDIT: tried backing up in recovery and restore its still going back to recovery. Also tried flashing 3.0.1 still the problem persist.
EDIT: also if i dirty flash sultans rom will i be able to enter? I havent able to back up anything :/