Can i use a stock kernel (gingerbread) on my custom rom Cyanogenmod kitkat, is posible?:victory:
Thanks.
Interface23 said:
Can i use a stock kernel (gingerbread) on my custom rom Cyanogenmod kitkat, is posible?:victory:
Thanks.
Click to expand...
Click to collapse
Without modifications --> NO
Wchich phone, kernel, roms are you talking about?
LS.xD said:
Without modifications --> NO
Wchich phone, kernel, roms are you talking about?
Click to expand...
Click to collapse
For Ace plus s7500l, and what if i use custom kernel like GellyBread_Rom_V1http://forum.xda-developers.com/showthread.php?t=2221767 on cyanogenmod kitkat http://www.htcmania.com/showthread.php?t=771844, because cyanogenmod kitkat is using giugiu kernel and is giving me some trouble in my phone:fingers-crossed:. Thanks for your time
Interface23 said:
For Ace plus s7500l, and what if i use custom kernel like GellyBread_Rom_V1http://forum.xda-developers.com/showthread.php?t=2221767 on cyanogenmod kitkat http://www.htcmania.com/showthread.php?t=771844, because cyanogenmod kitkat is using giugiu kernel and is giving me some trouble in my phone:fingers-crossed:. Thanks for your time
Click to expand...
Click to collapse
What kind of kernel related problems are you facing?
LS.xD said:
What kind of kernel related problems are you facing?
Click to expand...
Click to collapse
Battery draining (4 hours top), some lags and phone is a little bit hot.
Interface23 said:
Battery draining (4 hours top), some lags and phone is a little bit hot.
Click to expand...
Click to collapse
Battery is dead after 4 hours of gaming/browsing or standby?? Use Performance Control to set up the kernel right Android 4+ uses virtual ram taht may slow down the performance. Set swappiness in vm settings to 30. Keep in mind that zRam should be not more than 25% of the physical ram. Set sdcard read value to 512kb or 2048kb. Try different combinations of scheduler/governour. Don't overclock the cpu/gpu if the device already becomes hot.
In many cases the presetted kernel config is just kinda crappy and you can gain a lot by matching it to your needs
LS.xD said:
Battery is dead after 4 hours of gaming/browsing or standby?? Use Performance Control to set up the kernel right Android 4+ uses virtual ram taht may slow down the performance. Set swappiness in vm settings to 30. Keep in mind that zRam should be not more than 25% of the physical ram. Set sdcard read value to 512kb or 2048kb. Try different combinations of scheduler/governour. Don't overclock the cpu/gpu if the device already becomes hot.
In many cases the presetted kernel config is just kinda crappy and you can gain a lot by matching it to your needs
Click to expand...
Click to collapse
Just standby. Anyway, I will try with the performace control. Thanks
Interface23 said:
Just standby. Anyway, I will try with the performace control. Thanks
Click to expand...
Click to collapse
4 hours of standy? Seems as cpu runs at full load all the time. Thats NOT usable at all
LS.xD said:
4 hours of standy? Seems as cpu runs at full load all the time. Thats NOT usable at all
Click to expand...
Click to collapse
:crying::crying: Thx you for the support.:good:
Interface23 said:
:crying::crying: Thx you for the support.:good:
Click to expand...
Click to collapse
I just checked the phone's thread: There are so many roms available. Probably Neither GB nor this cra... CM11 will do it for you...
This looks good: KitKat SpeedMod
There is also a custom CM11 kernel --> LINK
LS.xD said:
I just checked the phone's thread: There are so many roms available. Probably Neither GB nor this cra... CM11 will do it for you...
This looks good: KitKat SpeedMod
There is also a custom CM11 kernel --> LINK
Click to expand...
Click to collapse
Kitkat Speedmod is for Ace s7500 and my version is s7500L
As you know, you're clever - me not Just a moment please
You got the Latin American version. Its made for other Cellular Networks than the international version
CM10.1 with 2.6 based kernel --> LINK should work better than the CM11 build
And a alternative CM 10.1.3 build --> LINK
LS.xD said:
As you know, you're clever - me not Just a moment please
You got the Latin American version. Its made for other Cellular Networks than the international version
CM10.1 with 2.6 based kernel --> LINK should work better than the CM11 build
And a alternative CM 10.1.3 build --> LINK
Click to expand...
Click to collapse
You think i could use this kernel on cm11 Kitkat.
Interface23 said:
You think i could use this kernel on cm11 Kitkat.
Click to expand...
Click to collapse
I won't suggest to do. As it will probably not work. Kitkat has not even a working camera...
LS.xD said:
I won't suggest to do. As it will probably not work. Kitkat has not even a working camera...
Click to expand...
Click to collapse
:highfive:Thanks for all
Related
Hi, I am running slimbean 4.3.1 and the blackhawk kernel on my p5113. I have successfully oc'd the CPU (its in the settings so it was easy). However, I don't see where I can set the GPU to a certain frequency. I have done a lot of searching, but without results.
Could someone please help me out with this? Thanks!
nuuvox said:
Hi, I am running slimbean 4.3.1 and the blackhawk kernel on my p5113. I have successfully oc'd the CPU (its in the settings so it was easy). However, I don't see where I can set the GPU to a certain frequency. I have done a lot of searching, but without results.
Could someone please help me out with this? Thanks!
Click to expand...
Click to collapse
brother you can only overclock cpu not gpu
only what you can do regarding gpu is that you can check force gpu rendering settings in developer options
aditya rathee said:
brother you can only overclock cpu not gpu
only what you can do regarding gpu is that you can check force gpu rendering settings in developer options
Click to expand...
Click to collapse
I disagree with you partially, you can oc gpu too. You can do it by changing manually which i did last time months ago because i have been using TricksterMOD, but it seems like after 2.1.5(?) update to kernel you can't do it anymore with it, so i use older version of next kernel what op is using.
EDIT: Actually i solved the problems and now it works with latest version using TricksterMOD!
Btw im on Cm 10.2 as you can see.
T3ER said:
I disagree with you partially, you can oc gpu too. You can do it by changing manually which i did last time months ago because i have been using TricksterMOD, but it seems like after 2.1.5(?) update to kernel you can't do it anymore with it, so i use older version of next kernel what op is using.
EDIT: Actually i solved the problems and now it works with latest version using TricksterMOD!
Btw im on Cm 10.2 as you can see.
Click to expand...
Click to collapse
ok buddy can you send me the link to this trickstermod
aditya rathee said:
ok buddy can you send me the link to this trickstermod
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod
You use STweaks
T3ER said:
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod
Click to expand...
Click to collapse
thanks for this i am gonna try this and tell if it works
Hi. How get maximum performance on Pico? I mean fastest ROM and OC kernel (safe, with partition sdcard). I want Cm 10.x and @878MHz (this no needed, i only like ant want it but if you have something with better performance, i will get it )
Don't Compare ROMS!
No offense but, You don't ask which rom is better. I've seen many threads closed due to that kind of question. Developers try very hard to develop a stable rom for our pico & all you do is ask about only the best one without even giving others a try..you should try & decide yourself, it's not that difficult..anyways, using pll2 overclock kernel boosts the performance..there's no other way to improve performance that much.
But some roms is faster and some slower. Some kernels (with pll2 overclocking) giving more performance. I'm asking with which rom and which kernel i will get highest performance. I'm not asking which rom is better
Example:
minimilised rom is faster than unofficial cm 10.2 . Aries kernel on 844MHz giving more performance than pandora @878MHz.
You understand me?
michal16 said:
But some roms is faster and some slower. Some kernels (with pll2 overclocking) giving more performance. I'm asking with which rom and which kernel i will get highest performance. I'm not asking which rom is better
Example:
minimilised rom is faster than unofficial cm 10.2 . Aries kernel on 844MHz giving more performance than pandora @878MHz.
You understand me?
Click to expand...
Click to collapse
I use minicm9 build 4+aries 3.5 oc kernel..smoothest so far..try benchmarks, you'll know the difference.
Affangta said:
I use minicm9 build 4+aries 3.5 oc kernel..smoothest so far..try benchmarks, you'll know the difference.
Click to expand...
Click to collapse
this is what I meant
Build 4? Why not build 7?
Build 4 and 7 not work with aries 3.5 oc kernel ;( help
michal16 said:
this is what I meant
Build 4? Why not build 7?
Build 4 and 7 not work with aries 3.5 oc kernel ;( help
Click to expand...
Click to collapse
build 5,6,7 give weird lags sometimes specially with oc kernel,and there's a benchmark difference too ..that's why I use build 4. Use aries 3.5 by @rcane from minicm9 thread.
Affangta said:
build 5,6,7 give weird lags sometimes specially with oc kernel,and there's a benchmark difference too ..that's why I use build 4. Use aries 3.5 by @rcane from minicm9 thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=46775772&postcount=348
This is it?
michal16 said:
http://forum.xda-developers.com/showpost.php?p=46775772&postcount=348
This is it?
Click to expand...
Click to collapse
yeah, that's the one.
Affangta said:
yeah, that's the one.
Click to expand...
Click to collapse
I have very high battery and ram usage. :crying: how to fix it?
michal16 said:
I have very high battery and ram usage. :crying: how to fix it?
Click to expand...
Click to collapse
use greenify.
Affangta said:
use greenify.
Click to expand...
Click to collapse
What? You mean kernel? I need overclock
michal16 said:
What? You mean kernel? I need overclock
Click to expand...
Click to collapse
it's not a kernel..it's an app.
Affangta said:
use greenify.
Click to expand...
Click to collapse
This app optimizing only user apps. I have high RAM and battery use without my applications.
And i try use screencast. On the video i see only epic laggs :/
Now i use cm10.1 and aries 3.5
anybody know other roms and kernel giving most performance?
Thread Closed - More Info
So, do you need a specific ROM for specific kernels? Or can you download kernels without a ROM?
Sent from my SM-G900T using XDA Premium 4 mobile app
If possible to download kernels, can someone link me to a list of them if that's how it works.
Sent from my SM-G900T using XDA Premium 4 mobile app
I know I am sounding like a total noob right now, I've flashed ROMs many times but don't know much about kernels
@jongonzalez716705
Of course you can flash a kernel without a rom.
Make sure that the kernel is compatible with your current rom.
Profits about a kernel;
+ Some kernels let your overlock your processors
+ faster boot time
+ some kernels have some other advantages.
Which phone do you have?
Hit the thanks button if you think this post is usefull .
Sent From A Samsung Galaxy S2 With AOSB Project ROM .
DanielBink said:
@jongonzalez716705
Of course you can flash a kernel without a rom.
Make sure that the kernel is compatible with your current rom.
Profits about a kernel;
+ Some kernels let your overlock your processors
+ faster boot time
+ some kernels have some other advantages.
Which phone do you have?
Hit the thanks button if you think this post is usefull .
Sent From A Samsung Galaxy S2 With AOSB Project ROM .
Click to expand...
Click to collapse
I currently have a Samsung Galaxy S 5 SM-G900T. I'm currently running XtreStolite ROM but currently running through some issues like wallpaper picker keeps force closing when I choose one, Setup for Fingerprint says to restart, I do, and still nothing, and tried downloading MyFiles but when ever I do an action, it force closes.
jongonzalez716705 said:
I currently have a Samsung Galaxy S 5 SM-G900T. I'm currently running XtreStolite ROM but currently running through some issues like wallpaper picker keeps force closing when I choose one, Setup for Fingerprint says to restart, I do, and still nothing, and another issue that I can't remember at this moment.
Click to expand...
Click to collapse
A new kernel will not fix that problems bro ... you should take another rom @jongonzalez716705
DanielBink said:
A new kernel will not fix that problems bro ... you should take another rom @jongonzalez716705
Click to expand...
Click to collapse
I know but I've downloaded a ROM before that had its own custom kernel. Had fun overclocking but spent more time underclocking. Is there somewhere where I can download certain kernels?
Yes,you can flash Kernels.
Why are custom kernels android useful?
Ans:Kernels are the brain of your Android device and communicate between software and hardware. Therefore, they are responsible for managing things like CPU / GPU clocking speed, screen sensitivity / colors or voltage. By using a custom kernel you can not only improve battery life, but also increase system performance.
Many custom ROMs already come with their own kernels. This is done to implement software communication of the custom ROM with the hardware of the device and also to ensure a better performance. Nevertheless, you are often also able to flash custom kernels to custom ROMs. If you decided to stick to a rooted version of stock Android, flashing a new kernel can offer you additional performance with the convenience of a stock OS.
Always make sure to check compatibility of the kernel with your ROM and device, because flashing a wrong kernel can brick your phone!
You can use this apk called as Franco.kernel. The app is available in playstore.
Yeah I was wondering this too....
Is it possible to take my original rom kernel (built for mediatek 6582) and use it on say cyanogen ?
biatche said:
Yeah I was wondering this too....
Is it possible to take my original rom kernel (built for mediatek 6582) and use it on say cyanogen ?
Click to expand...
Click to collapse
⬇⬇My reply is in the next page .⬇⬇
??????????????
biatche said:
Yeah I was wondering this too....
Is it possible to take my original rom kernel (built for mediatek 6582) and use it on say cyanogen ?
Click to expand...
Click to collapse
It depends upon the device,Features,ROM etc.
Sent from my Nexus 7 using XDA Free mobile app
Praise God! The AKLU kernel has arrived on the Galaxy Note Edge in the flavor of NOUGAT!
NOTE: I highly recommend turning off THERMAL CORE CONTROL! Use THERMAL TEMPERATURE THROTTLE instead. Thermal core control has been known to cause random reboots on this kernel before when gaming or during heavy use. You can use Kernel Adiutor to adjust these settings.
TBLTE AKLU KERNEL for AOKP 7.1.2!
MAY work for other LineageOS based roms, e.g., RR, PAC,AOKP, LineageOS, etc.
Download:
http://www.mediafire.com/file/pcownjeat1o2oub/AKLU-TBLTE-AOKP-N-20170427_kexec.zip
TBLTE AKLU KERNEL for SLIM 7.1.1!
MAY work for other AOSP based roms, e.g., OmniRom, LiquidDark, SlimRoms, AOSP, etc.
Download:
http://www.mediafire.com/file/cl0ahc00zmxcai2/AKLU-TBLTE-SLIM-N-20170224.zip
Logs and features:
Modified TBLTE kernel. Modified by the Alaskalinuxuser.
https://thealaskalinuxuser.wordpress.com
20170427
- Updated kernel to include kexec hardboot for MultiRom support.
20170316
-Update for OMS support.
20170217
- Fix WiFi hot spot error for Nougat.
- Overclocked the GPU from 600MHz to 633MHz
- Overclocked the CPU from 2649MHz to 2688MHz
- Added governors: Bioshock, Lionheart, Nightmare, Darkness
- Removed input boost, use cpu boost instead
- Added I/O schedulers: FIOPS, ZEN
I haven't loaded up AOKP yet but this kernel is working beautifully with RR and the data fix. You rock man.
JeremySS said:
I haven't loaded up AOKP yet but this kernel is working beautifully with RR and the data fix. You rock man.
Click to expand...
Click to collapse
JeremySS,
Thank you for the kind words!
In theory it should work with any nougat rom based on LineageOS, but I have not proved that personally. Thanks for confirming that for RR and providing the feedback!
AlaskaLinuxUser said:
JeremySS,
Thank you for the kind words!
In theory it should work with any nougat rom based on LineageOS, but I have not proved that personally. Thanks for confirming that for RR and providing the feedback!
Click to expand...
Click to collapse
You do good work. Do you have a donate link?
JeremySS said:
You do good work. Do you have a donate link?
Click to expand...
Click to collapse
Thanks for the thought, but I do not accept donations. I just tinker for fun, and have my own rewards. Besides, guys like @Mickey387 did all the heavy lifting, I just try to put the device trees and vendor blobs to good use, with a few edits here and there. Glad to know that my work is appreciated, though.
The slim 7 aklu kernel appears to be slightly unstable at this time. Please use with caution.
EDIT: Updated the kernel and fixed a few bugs that I missed in the first build. SHOULD be better now. Please turn off thermal core control for best performance!
Also, if you flashed superSU in Slim to root it, you need to flash the kernel, then immidiately flash superSU, then reboot.
AlaskaLinuxUser said:
The slim 7 aklu kernel appears to be slightly unstable at this time. Please use with caution.
EDIT: Updated the kernel and fixed a few bugs that I missed in the first build. SHOULD be better now. Please turn off thermal core control for best performance!
Also, if you flashed superSU in Slim to root it, you need to flash the kernel, then immidiately flash superSU, then reboot.
Click to expand...
Click to collapse
Hi... help me pleeze make kernel fo me n915d. really I want to give him a second life on his rom
All works fine but no sim card
Imei and everything else is.
Now used ramkernel v5_n915d and note 7 port.
but I want to Aokp 7.1.1
Here's how to do kernel ram121
github.com/Ram121/RamKernel_N4/commit/360a66df3d38b298896bfd161a2db2812f7b1efa
Steem75 said:
Hi... help me pleeze make kernel fo me n915d. really I want to give him a second life on his rom
All works fine but no sim card
Imei and everything else is.
Now used ramkernel v5_n915d and note 7 port.
but I want to Aokp 7.1.1
Here's how to do kernel ram121
github.com/Ram121/RamKernel_N4/commit/360a66df3d38b298896bfd161a2db2812f7b1efa
Click to expand...
Click to collapse
Please compile kernel with this config....
I do not have now Linux,Mac_os
apq8084_sec_tblte_dcm_defconfig
Steem75 said:
Please compile kernel with this config....
I do not have now Linux,Mac_os
apq8084_sec_tblte_dcm_defconfig
here's another
apq8084_sec_tblte_dcm_defconfig
Click to expand...
Click to collapse
Steem75,
I am sorry, but at this time I do not have the resources to help you.
AlaskaLinuxUser said:
Steem75,
I am sorry, but at this time I do not have the resources to help you.
Click to expand...
Click to collapse
then help me with advice
I make zImage with gcc eabi 4.8. End only *****_DCM_Defconfig
Log -hastebin.com/gudipabona.coffeescript
but it is not boot my note edge . Maybe because I packed it in your boot.img?
Or because compiled with only one config?
Praise God! A new kernel update!
The AKLU kernel for the AOKP has been updated to include kexec hardboot for rmultirom support! See the OP for details!
I have noticed that many of these processors on the note4/edge are of a good bin.. Mine can run about 45mv off from stock.. Have you ever considered adding CPU Voltage control to help a bit with battery longivity? I do thank you for your excellent work, your rom's and kernels truly show that it is the programmer not the hardware that matters.... Godspeed....
afbcamaro said:
I have noticed that many of these processors on the note4/edge are of a good bin.. Mine can run about 45mv off from stock.. Have you ever considered adding CPU Voltage control to help a bit with battery longivity? I do thank you for your excellent work, your rom's and kernels truly show that it is the programmer not the hardware that matters.... Godspeed....
Click to expand...
Click to collapse
Thanks afbcamero, those are kind words.
On my MM kernels I did implement UV, but the way I did it in MM fails to pass in the N kernel. Not because it doesn't work, but rather that new build standards don't allow it. With the recent birth of my son, I have not had time yet to go back to it and figure out what was wrong yet. Are you familiar with kernel work? You could look at my github and my kernel source, perhaps you could show me where I went wrong?
If I can get passed that, I can implement the UV again. I also have the same problem for GPU voltage control, which I used to put on my MM kernels as well.
Perhaps when life slows down a bit, I can look back into it.
Sent from my unknown using XDA-Developers Legacy app
Oh I see, i honestly never looked at the structure of Nougat kernels. Any time I want to implement a change somebody does it better and beats me to the punch.. I will look at it just in case I see something..
On another note, these things however fun (development) not being trully important, may your family be blessed by the big guy.
Thanks! I'm always open to ideas on kernel improvement.
Sent from my unknown using XDA-Developers Legacy app
sim card not detected
Im on RR (7.1.2 micky387 build) but when i flashed the kernel, sim card isnt detected...anybody got the same issue? Any fix for that?
N915f on 6.0.1 modem
Ricationarli said:
Im on RR (7.1.2 micky387 build) but when i flashed the kernel, sim card isnt detected...anybody got the same issue? Any fix for that?
N915f on 6.0.1 modem
Click to expand...
Click to collapse
You could try the data fix zips in the 915t T-Mobile thread.
Sent from my LG-H811 using XDA-Developers Legacy app
AlaskaLinuxUser said:
You could try the data fix zips in the 915t T-Mobile thread.
Click to expand...
Click to collapse
Tried both, sadly didnt work
Ricationarli said:
Im on RR (7.1.2 micky387 build) but when i flashed the kernel, sim card isnt detected...anybody got the same issue? Any fix for that?
N915f on 6.0.1 modem
Click to expand...
Click to collapse
I had the same issue. No fix by me.
+1
Sent from my SM-N930F using XDA-Developers Legacy app
It's been a solid year since I've updated my tab 10.1's rom, and it's slowed down a bit (mainly because of RAM), so I wanted to ask the community should I update from CM13?
I'm looking for a rom with these qualities:
- Android 6.0+
- Themes
- Fast and light
- Can be OC'd
- Compatible w/ Xposed
safwanz1 said:
It's been a solid year since I've updated my tab 10.1's rom, and it's slowed down a bit (mainly because of RAM), so I wanted to ask the community should I update from CM13?
I'm looking for a rom with these qualities:
- Android 6.0+
- Themes
- Fast and light
- Can be OC'd
- Compatible w/ Xposed
Click to expand...
Click to collapse
You can go for Lineage OS 13.0 but it is not over clocked
shafa.musraf said:
You can go for Lineage OS 13.0 but it is not over clocked
Click to expand...
Click to collapse
Overclocking is needed imo on the Tab 2
safwanz1 said:
Overclocking is needed imo on the Tab 2
Click to expand...
Click to collapse
I don't know over clocked kernel is available or not. You want performance?
shafa.musraf said:
I don't know over clocked kernel is available or not. You want performance?
Click to expand...
Click to collapse
Yeah
Custom kernels aren't supported anymore, meaning oc kernels like dhollmen won't work with newer roms. You'll need to get an older rom but it won't have security updates or better optimization on the tab
safwanz1 said:
Yeah
Click to expand...
Click to collapse
If you want best performance. Try KitKat ROM. I am using CM 11 since 2 months performance is pretty good
shafa.musraf said:
If you want best performance. Try KitKat ROM. I am using CM 11 since 2 months performance is pretty good
Click to expand...
Click to collapse
Kitkat is a bit too old to run for me
Lightracer said:
Custom kernels aren't supported anymore, meaning oc kernels like dhollmen won't work with newer roms. You'll need to get an older rom but it won't have security updates or better optimization on the tab
Click to expand...
Click to collapse
Oh thanks for the heads up, guess best option is to factory reset
safwanz1 said:
Kitkat is a bit too old to run for me
Click to expand...
Click to collapse
Than try Lineage OS 13 or UA 6.0
shafa.musraf said:
Than try Lineage OS 13 or UA 6.0
Click to expand...
Click to collapse
Does it have themes and OC?
safwanz1 said:
Does it have themes and OC?
Click to expand...
Click to collapse
There is no working OC Kernel anymore.
You can use some 2 years old device specific builds with old OC Kernel only.
UA doesn't have a theme manager - it's almost pure AOSP and won't have any extras added in future (maybe an integrated Updater only).
Android-Andi said:
There is no working OC Kernel anymore.
You can use some 2 years old device specific builds with old OC Kernel only.
UA doesn't have a theme manager - it's almost pure AOSP and won't have any extras added in future (maybe an integrated Updater only).
Click to expand...
Click to collapse
Oh, so how's performance on Lineage?
safwanz1 said:
Oh, so how's performance on Lineage?
Click to expand...
Click to collapse
Depends on your needs. Install twrp, make a backup of current rom and test yourself
Fyi:
https://twrp.me/faq/backupexclusions.html