TWRP 2.7.0.8 Unofficial - AT&T, Rogers HTC One X, Telstra One XL

Mods feel free to move if this is in the wrong section.
This is an unofficial build of TWRP RECOVERY built from the latest twrp sources
I just compiled this out and it fixes the new fstab layout starting from tonight's Cyanogenmod build
Credit: Mdmower --> https://github.com/mdmower/twrp/tree/twrp-2.7.0.8
Download: http://d-h.st/kgR
Note: If after installing the recovery, it will not pass the screen TWRP:
Restart and boot normally (system), then with any file manager to delete this "/sdcard/TWRP/.twrps
Click to expand...
Click to collapse
Sorry, this thread isn't pretty, but whatever

Mdmower also compiled his...didn't notice lol
feel free to take either one, won't hurt my feelings, as long as it gets the job done
http://mdmower.cmphys.com/download/267/?version=2.7.0.8

How did this recovery pan out? What's diff of this one and 2.7. Just wondering
Sent from my Desire HD using Tapatalk

chrisb906 said:
How did this recovery pan out? What's diff of this one and 2.7. Just wondering
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
CM is having a new fstab layout for a number of devices. One of these changes include a by-name partition support (instead of say mmcblk0p33 called as "system"). you need this recovery to flash CM from today, and probably all 4.4.2 ROMs soon
That's the major change...other than that: adb fixes (big issue for me while trying to pull kmesg logs for Sense 6 building :fingers-crossed, LED fixes, dual core support, fix of backup and restoration of encrypted backups

Is the mounting to pc issue solved?
Sent from my HTC One XL using xda premium

paras33 said:
Is the mounting to pc issue solved?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
I haven't tried. I know adb works now though so I can guess that mass storage will too
Sent from my HTC One XL using Tapatalk

Tried flashing, then tried booting both versions directly from fastboot and neither will completely boot for me. All I get is a flashing TWRP splash.

jacobas92 said:
Tried flashing, then tried booting both versions directly from fastboot and neither will completely boot for me. All I get is a flashing TWRP splash.
Click to expand...
Click to collapse
Is anyone else having this issue? because its working for me fine. Maybe an ruu will fix it
Sent from my HTC One XL using Tapatalk

pandasa123 said:
Is anyone else having this issue? because its working for me fine. Maybe an ruu will fix it
Sent from my HTC One XL using Tapatalk
Click to expand...
Click to collapse
I guess I could try that. I'm fairly certain I've got the latest firmware and hboot, but its worth a shot
Sent from my Wabbajack using Tapatalk Classic

jacobas92 said:
Tried flashing, then tried booting both versions directly from fastboot and neither will completely boot for me. All I get is a flashing TWRP splash.
Click to expand...
Click to collapse
I did what Jose mentioned in the Pacman Kitkat thread as the fix to this--"Note: If after installing the recovery, it will not pass the screen TWRP
Restart and boot normally (system), then with any file manager to delete this "/sdcard/TWRP/.twrps"
It worked for me, and I had the same flashing TWRP screen issue as you.

Rayvin56 said:
I did what Jose mentioned in the Pacman Kitkat thread as the fix to this--"Note: If after installing the recovery, it will not pass the screen TWRP
Restart and boot normally (system), then with any file manager to delete this "/sdcard/TWRP/.twrps"
It worked for me, and I had the same flashing TWRP screen issue as you.
Click to expand...
Click to collapse
Ahh. Thanks bud, I'll get right on that.

Mounting to PC is not working in this version of TWRP

sathish804 said:
Mounting to PC is not working in this version of TWRP
Click to expand...
Click to collapse
It is for me, you could try uninstalling the currently installed driver on windows and reinstall it.

jacobas92 said:
It is for me, you could try uninstalling the currently installed driver on windows and reinstall it.
Click to expand...
Click to collapse
I tried to uninstall and re-install the drivers but no luck for me to enable USB mounting in TWRP 2.7.0.8

I just flashed this via fastboot and when I go into recovery, it gets stock on the teamwin logo forever?? md5 checks out?

Lunatic00 said:
I just flashed this via fastboot and when I go into recovery, it gets stock on the teamwin logo forever?? md5 checks out?
Click to expand...
Click to collapse
Go back, one page.

I flashed this today and now my internal SD card doesn't mount. I'd be grateful for any assistance.

[email protected] said:
I flashed this today and now my internal SD card doesn't mount. I'd be grateful for any assistance.
Click to expand...
Click to collapse
All you needed to do was read the last few posts in this thread for suggestions on what to do.
Sent from my Evita

I flashed mine with Flash GUI Image. It worked flawlessly and TWRP is super smooth and stable. I couldn't use fastboot because my phone can't be recognized by my PC.

timmaaa said:
All you needed to do was read the last few posts in this thread for suggestions on what to do.
Sent from my Evita
Click to expand...
Click to collapse
I'm sorry timmaaa, I'm not sure what you mean. When I use a file explorer on my phone, it says my internal storage sd card is unmounted.

Related

[Q] Bricked my HTC One S

Hi all,
Got mine today, tried to install a ROM and it got stuck in bootloop.
I did a number of stupid things not to mention wiping the SD and im in serious trouble.
I can get into bootloader and CWM but thats it.
Ive heard restoring a RUU can cure it but I have a MAC and cant find anything to help.
Can anyone help? Im gutted....and fell like an idiot.
Ive got an S4 on the three network.
Thanks
Hold down the power button for 10 seconds then after the touch buttons stop flashing, just hold the volume button and see if ot enters the bootloader.
Sent from my HTC One S using xda app-developers app
blackcell1 said:
Hold down the power button for 10 seconds then after the touch buttons stop flashing, just hold the volume button and see if ot enters the bootloader.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Hi,
It enters into bootloader but then what?
Follow the guide here from how to flash custom rom
http://forum.xda-developers.com/showthread.php?p=24478083
Sent from my HTC One S using xda app-developers app
blackcell1 said:
Follow the guide here from how to flash custom rom
http://forum.xda-developers.com/showthread.php?p=24478083
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Its sent and wrote the recovery file but what now?
mikejasonsmith said:
Its sent and wrote the recovery file but what now?
Click to expand...
Click to collapse
Specifically you'll have to flash the ROM zip file from the recovery and then use fastboot flash boot boot.img.
You can find boot.img inside the ROM zip file
Tried flashing ROM zip but no joy...when should i flash boot img? before or after recovery?
mikejasonsmith said:
Tried flashing ROM zip but no joy...when should i flash boot img? before or after recovery?
Click to expand...
Click to collapse
ok managed to get the sd mounted...phew...but how do i get a rom on when it wont boot?
mikejasonsmith said:
ok managed to get the sd mounted...phew...but how do i get a rom on when it wont boot?
Click to expand...
Click to collapse
Ive used TRW to get the sd mounted but it wont boot beyond that. i restored the stock recovery but what do i do next?
At the moment i have a phone which has CWM working but nothing else?
Thanks for your help
mikejasonsmith said:
Ive used TRW to get the sd mounted but it wont boot beyond that. i restored the stock recovery but what do i do next?
At the moment i have a phone which has CWM working but nothing else?
Thanks for your help
Click to expand...
Click to collapse
ok so ive tried flashing ruu and keep getting error 155 which is a cid issue i believe - which RUU do i use for a device locked to '3'?
Thanks
oh and can you point me in the direction of it...thanks
mikejasonsmith said:
ok so ive tried flashing ruu and keep getting error 155 which is a cid issue i believe - which RUU do i use for a device locked to '3'?
Thanks
oh and can you point me in the direction of it...thanks
Click to expand...
Click to collapse
so ive managed to get the h3g rom and flashed rom and boot.img.
locked bootloader and run RUU but i keep getting error 155???
Somebody please help me before this thing goes out of the window.....:crying:
Search adb push
Sent from my HTC One S using Tapatalk 2
danevianta said:
Search adb push
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
Finally seem to have done it and managed to RUU
The phone is locked to 3 but as a noob I spent 2 days flashing a generic euro ROM.
When i realised i need a ROM to match CID i downloaded 1.53. Tried this a number of times with no joy.
Just tried 1.78 and it seems to be working
Thanks to everyone for your help - us noobs must be sooooooo annoying.
Htc One S bricked
Hi im relatively new at rooting and am currently experiencing issues with a bricked device.
i have two htc one s devices
my personal one is running cm10 ville with clockwork touch recovery and is working perfectly
however the second one i was using the same exact files.
this one is bricked
its in a constant bootloop.
i can get back to my recovery just fine and get to the fastboot in the phone fine
i cleared my cache
wiped my data and wiped the dalvik cache all perfectly fine when i try to flash the cm10 official rom back on it cannot mount the sd card
i would try to install a different recovery and try again maybe using viper one s
but i cannot get the phone to power on
it doesnt showup on the computer when it is plugged in while in fastboot
when i try the cmd fastboot flash recovery it says waiting for device
any advice. this is not my own phone so i need it repaired pretty quickly.
any helpful information would be much appreciated.
FaLLeN_BtB said:
Hi im relatively new at rooting and am currently experiencing issues with a bricked device.
i have two htc one s devices
my personal one is running cm10 ville with clockwork touch recovery and is working perfectly
however the second one i was using the same exact files.
this one is bricked
its in a constant bootloop.
i can get back to my recovery just fine and get to the fastboot in the phone fine
i cleared my cache
wiped my data and wiped the dalvik cache all perfectly fine when i try to flash the cm10 official rom back on it cannot mount the sd card
i would try to install a different recovery and try again maybe using viper one s
but i cannot get the phone to power on
it doesnt showup on the computer when it is plugged in while in fastboot
when i try the cmd fastboot flash recovery it says waiting for device
any advice. this is not my own phone so i need it repaired pretty quickly.
any helpful information would be much appreciated.
Click to expand...
Click to collapse
Bootloop does not mean your bricked...means you need to fastboot flash boot.img
Sent from my HTC One S using xda premium
blackcell1 said:
Hold down the power button for 10 seconds then after the touch buttons stop flashing, just hold the volume button and see if ot enters the bootloader.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
This little post just pulled me out of missery. Love ya man!
all you guys getting sorted
make a nandroid and sdcard bu NOW and put them on pc,
obviously leave a copy of nandroid on phone also
makes it a lot easier if you get in trouble again
and you/we will
Mounts and Storage --> Format everything --> Now Mount USB Drive --> Put Gapps and ROM
Flash it, erase cache & and Dalvik...Blah blah blah. Flash boot.img in fastboot, and there you go.
Everybody, please remember this and there won't be noob q&a anymore...
TWRP v 2.2.2.1 I can't flash Jelly Bean 4.2.2 .zip on HTC one s (s3)
HI, my device is an HTC ONE S (s3)... I've already unlocked the bootloader and rooted it... it's ok... For recovery mode I installed TWRP v 2.2.2.1.... I've wiped the cache and made a factory reset... BUT when I try to flash the zip which contains the jelly bean 4.2.2 I get a message saying: FAILED when i was trying to install it... PLEASE I NEED YOUR HELP CUZ I THINK I CAN'T DO TOO MUCH WITHOUT AN OS ON MY DEVICE... I'M NOW JUST IN TWRP... HELP PLEASE........
mikebryant2807 said:
HI, my device is an HTC ONE S (s3)... I've already unlocked the bootloader and rooted it... it's ok... For recovery mode I installed TWRP v 2.2.2.1.... I've wiped the cache and made a factory reset... BUT when I try to flash the zip which contains the jelly bean 4.2.2 I get a message saying: FAILED when i was trying to install it... PLEASE I NEED YOUR HELP CUZ I THINK I CAN'T DO TOO MUCH WITHOUT AN OS ON MY DEVICE... I'M NOW JUST IN TWRP... HELP PLEASE........
Click to expand...
Click to collapse
See other reply.

[Q] HTC One X (AT&T) Won't Turn on

Hi,
I am new to rooting the device. I rooted HTC One X (AT&T) using toolkit by Hasoon2000. I followed all the steps as per my knowledge. Everything went good rooting the device, But when I tried to flash CM 10.1 it was giving me failure error. When I did second time it gave me same error but somehow I thought ROM got flashed and went ahead and flashed kernel. While doing so my cell phone battery was till 50% but once I flashed kernel. Suddenly screen went blank and couldn't turn it on. When try to go into fastboot mode it lights up red led and once and stays there until I hit the power button. After hitting power button it shows the HTC logo and displays the message below logo about device being used for development. then within a second screen gets turned off (no red LED) I tried to keep for charging for at least an hour or so with computer as well as on AC power but results are same. Neither I am able to connect it to computer or charge it. I don;t know what is going on with my device. So please can someone help me with this issue? I would really appreciate if this issue been resolved.
Thanks in Advance.
nishantbalwan said:
Hi,
I am new to rooting the device. I rooted HTC One X (AT&T) using toolkit by Hasoon2000. I followed all the steps as per my knowledge. Everything went good rooting the device, But when I tried to flash CM 10.1 it was giving me failure error. When I did second time it gave me same error but somehow I thought ROM got flashed and went ahead and flashed kernel. While doing so my cell phone battery was till 50% but once I flashed kernel. Suddenly screen went blank and couldn't turn it on. When try to go into fastboot mode it lights up red led and once and stays there until I hit the power button. After hitting power button it shows the HTC logo and displays the message below logo about device being used for development. then within a second screen gets turned off (no red LED) I tried to keep for charging for at least an hour or so with computer as well as on AC power but results are same. Neither I am able to connect it to computer or charge it. I don;t know what is going on with my device. So please can someone help me with this issue? I would really appreciate if this issue been resolved.
Thanks in Advance.
Click to expand...
Click to collapse
Please provide:
Hboot version
S-ON or S-OFF
exad said:
Please provide:
Hboot version
S-ON or S-OFF
Click to expand...
Click to collapse
I don't remember Hboot version. Is there any way I can I find that out as my phone is dead. But S-ON was there all the time even after unlocking bootloader.
Thanks.
nishantbalwan said:
I don't remember Hboot version. Is there any way I can I find that out as my phone is dead. But S-ON was there all the time even after unlocking bootloader.
Thanks.
Click to expand...
Click to collapse
While it's off, press and hold volume down and power until the Hboot comes up.
exad said:
While it's off, press and hold volume down and power until the Hboot comes up.
Click to expand...
Click to collapse
Phone is now showing me HBOOT screen, HBOOT is 2.14.000. Now In order to install CM 10.1 what do I need to do as it was failing. Also will my device go off again?
Thanks a ton
nishantbalwan said:
Phone is now showing me HBOOT screen, HBOOT is 2.14.000. Now In order to install CM 10.1 what do I need to do as it was failing. Also will my device go off again?
Thanks a ton
Click to expand...
Click to collapse
Flash TWRP 2.6 if you're not using that version already.
fastboot flash recovery twrpfilename.img
Download cm 10.1 Check md5 to make sure download was good. Also, make sure you're downloading the one for our device. Link will be in original android dev section.
wipe everything (except sd card) in twrp 2.6
then flash cm 10.1
If you get an error, tell me what the error is.
exad said:
Flash TWRP 2.6 if you're not using that version already.
fastboot flash recovery twrpfilename.img
Download cm 10.1 Check md5 to make sure download was good. Also, make sure you're downloading the one for our device. Link will be in original android dev section.
wipe everything (except sd card) in twrp 2.6
then flash cm 10.1
If you get an error, tell me what the error is.
Click to expand...
Click to collapse
Thanks you very much exad. Is it important to have S-OFF? Can I install android 4.3 ROM on HTC One X. Have you tried that? How can I check md5 to make sure CM is good?
S-off allows you to ruu without bricking.
Yes. I am running android 4.3 cm 10.2 right now. There have been bricks reported though that issue should be fixed now.
Use an md5 checker program. Google md5 checker.
Sent from my One X using xda app-developers app
exad said:
S-off allows you to ruu without bricking.
Yes. I am running android 4.3 cm 10.2 right now. There have been bricks reported though that issue should be fixed now.
Use an md5 checker program. Google md5 checker.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
I have flashed openrecovery-twrp-2.6.0.1-m7.img but when I want to go to recovery it is still sticking on that HTC logo screen, giving message in red and getting it off. I don't know what I can do to go in recovery and do the needful.
Could you also provide me link to instruction to install CM 10..2 with that as well?
Thanks
nishantbalwan said:
I have flashed openrecovery-twrp-2.6.0.1-m7.img but when I want to go to recovery it is still sticking on that HTC logo screen, giving message in red and getting it off. I don't know what I can do to go in recovery and do the needful.
Could you also provide me link to instruction to install CM 10..2 with that as well?
Thanks
Click to expand...
Click to collapse
M7 is the new HTC one device you flashed the wrong recovery. You need to flash twrp 2.6 for the evita.
Sent from my HTC One XL using xda premium
31ken31 said:
M7 is the new HTC one device you flashed the wrong recovery. You need to flash twrp 2.6 for the evita.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
How can I copy CM 10.1 and gapps on sd card? I am not having access to copy those file on sdcard. Is there any way I can flash ROM without copying files into sdcard?
I have installed but still I am not able to start phone. Could you please help me with that?
Thanks
nishantbalwan said:
How can I copy CM 10.1 and gapps on sd card? I am not having access to copy those file on sdcard. Is there any way I can flash ROM without copying files into sdcard?
I have installed but still I am not able to start phone. Could you please help me with that?
Thanks
Click to expand...
Click to collapse
If you are able to boot into recovery, then you should be able to use the command <code> adb push <code>to copy any file from your current directory in computer to the sdcard
Sent from my Nexus 7 using xda app-developers app
kewlguru said:
If you are able to boot into recovery, then you should be able to use the command <code> adb push <code>to copy any file from your current directory in computer to the sdcard
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Adb won't work, he doesn't have a ROM to boot into.
nishantbalwan said:
How can I copy CM 10.1 and gapps on sd card? I am not having access to copy those file on sdcard. Is there any way I can flash ROM without copying files into sdcard?
I have installed but still I am not able to start phone. Could you please help me with that?
Thanks
Click to expand...
Click to collapse
Have you flashed the correct recovery for our device (Evita) yet?
Sent from my Evita
kewlguru said:
If you are able to boot into recovery, then you should be able to use the command <code> adb push <code>to copy any file from your current directory in computer to the sdcard
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Even after installing TWRP 2.6 I am not able to flash the ROM. It is saying:
No MD5 file found.
assert failed: getprop("ro.product.device")=="endeavoru" || getprop("r
E:Error executing updater binary inn zip ,/sdcard/ROMs/cm-10.1.0-RC5-ende
updating partition details...
Wrong ROM. You have evita not endeavour.
Look before you download and flash wrong recovery and ROM because you are on track to brick your device. You have burnt 2 of your lives already.
You have no idea how lucky you are as your device should already be broken.
timmaaa said:
Adb won't work, he doesn't have a ROM to boot into.
Have you flashed the correct recovery for our device (Evita) yet?
Sent from my Evita
Click to expand...
Click to collapse
It did work. I was successful to copy files from computer to sdcards using adb.
twistedddx said:
Wrong ROM. You have evita not endeavour.
Look before you download and flash wrong recovery and ROM because you are on track to brick your device. You have burnt 2 of your lives already.
You have no idea how lucky you are as your device should already be broken.
Click to expand...
Click to collapse
I think I have installed CM 10.1.2 for evita but now it is not rebooting into ROM. I am not able to reboot automatically. I have press and hold power and volume down key to go into fastboot. I am not getting what I am doing wrong now.
nishantbalwan said:
It did work. I was successful to copy files from computer to sdcards using adb.
Click to expand...
Click to collapse
Ok. But listen to what Twisteddx said just before, take your time and make sure you're only flashing things meant for your device. He was right, you're EXTREMELY lucky you haven't bricked your phone yet. Only download ROMs from within this forum!
Sent from my Evita
If you are s-on you need to extract the boot.img from the rom you're flashing and fastboot flash boot boot.img or it won't boot. With S-off this step is no longer required.
Sent from my One X using xda app-developers app
exad said:
If you are s-on you need to extract the boot.img from the rom you're flashing and fastboot flash boot boot.img or it won't boot. With S-off this step is no longer required.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
How can I extact boot.img file? can I use fastboot commands?

sdcard formated

Hey guys today when I turned my phone on nothing happened it showed the htc screen then turned off. I loaded recovery and noticed that everything on my SD card was wiped. I'm thinking even the OS is gone as well because it will not boot past the HTC screen. It stays there and after about a min or so the phone turns off. Is there a way to install the stock os in fastboot?
Provide more info please. What ROM were you on? Were you on a custom kernel? Had you made any changes to the device recently? What are your bootloader details?
Sent from my Evita.
timmaaa said:
Provide more info please. What ROM were you on? Were you on a custom kernel? Had you made any changes to the device recently? What are your bootloader details?
Sent from my Evita.
Click to expand...
Click to collapse
I didn't have a custom rom installed, I was on latest stock. I was rooted and my bootloader was unlocked. I didn't make any changes to my device
That's very odd, devices don't usually just wipe automatically. Anyway, just try mounting your sd card in TWRP recovery and copying a ROM across from your PC.
Sent from my Evita.
timmaaa said:
That's very odd, devices don't usually just wipe automatically. Anyway, just try mounting your sd card in TWRP recovery and copying a ROM across from your PC.
Sent from my Evita.
Click to expand...
Click to collapse
yeah it wouldn't let me do that either, I downloaded the RUU and reloaded the phone that way.
Try wiping the sdcard again and then mounting it.
Sent from my HTC One XL using XDA Premium 4 mobile app
pandasa123 said:
Try wiping the sdcard again and then mounting it.
Sent from my HTC One XL using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It was mounted, the problem was everything was wiped from it, I managed to get my phone back up and running by using the RUU. thanks for the help guys

[SOLVED] Error mounting the SD-Card

Hello!
For days I have been struggling with my HTC One S. It all started when I forgot to reflash the boot.img after updating Cyanogenmod. At first I didn't understand that I needed this after kernel changes, and just installed different versions of Cyanogenmod because I thought that "that version has a bug and doesn't work". The screen had only stripes of different colours, and couldn't boot. After trying different versions, wiping and flashing, I found out about the important boot.img. Just when I figured out that, and booted recovery an evening I noticed that the sd-card couldn't be mounted longer. I didn't think too hard about it, and just connected my phone to the computer to flash the boot.img and a new recovery. I only have Windows 8.1 on my computers, which didn't work. Therefor I decided to install Ubuntu alongside Windows (took me 6 hours now to do so), and now Fastboot finally worked! Than I flashed boot.img and a new recovery. The strang thing now was that I could finally boot the last Cyanogenmod version I flashed before the SD-card mount error (10.2.0), but still in recovery the SD-Card can't mount, nor in Android. I have tried to follow different guides here to avoid doublepost, but without success. Can someone please help me?
I think you should try to install the recovery that linked at the cyanogenmod thread's first post and then retry to flash cm and boot.img
If can't mount sd after flashing twrp try wiping sd card
Sent from my One S using xda app-developers app
Thanks!
ka_55 said:
I think you should try to install the recovery that linked at the cyanogenmod thread's first post and then retry to flash cm and boot.img
If can't mount sd after flashing twrp try wiping sd card
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Thank you so much! First I tried to install TWRP, and it did go well, but still could not mount sd-card. Than I tried to wipe the sd-card, and after all was back to normal. Thanks again! I am happy
Norwegianones said:
Thank you so much! First I tried to install TWRP, and it did go well, but still could not mount sd-card. Than I tried to wipe the sd-card, and after all was back to normal. Thanks again! I am happy
Click to expand...
Click to collapse
i'm happy too if i could help and you should mark this thread as solved
Marked
ka_55 said:
i'm happy too if i could help and you should mark this thread as solved
Click to expand...
Click to collapse
Marked Having latest nightly of Cyanogenmod 11 installed now
Have fun with cm then
Sent from my One S using xda app-developers app
ka_55 said:
Have fun with cm then
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I will

[DEPRECATED] Unofficial TWRP v2.7.0.3 for m8vzw

USE THIS INSTEAD: http://forum.xda-developers.com/showthread.php?t=2711051
============================================================================================
Now that s-off has been released, here's a working TWRP for the Verizon M8.
FYI: Because I'm lazy I did not build this from source. I simply ported the GSM twrp and replaced the variant specific bits with our stuff. I have also not extensively tested this, so beware!
Pre-Requisites:
- s-off (I'm sure you can use the search button and figure out how to do this)
- fastboot and adb binaries (I'm sure you can use the search button and figure out how to do this)
- download this: deleted
Boot into fastboot mode:
Code:
adb reboot bootloader
Install the img downloaded from above:
Code:
fastboot flash recovery openrecovery-twrp-2.7.0.3-m8vzw-UNOFFICIAL.img
You may then either boot back into your rom using: fastboot reboot
or
Use the menu in the bootloader to reboot or (via the HBOOT menu) reboot into recovery
Sweet. Thanks
Sent from my HTC6525LVW using Tapatalk
Do I need glasses to use ?
HTC ONE (M8)
sorry for broken links, etc
all should be well now, please check your md5sum
no, you don't need glasses for this one =P
invisiblek said:
sorry for broken links, etc
all should be well now, please check your md5sum
no, you don't need glasses for this one =P
Click to expand...
Click to collapse
Flashify works great for flashing this too...
Sent from my Nexus 7 using Tapatalk
Nice looks great awesome work
Thanks, cool to,have both custom recovery options. Anyone do a backup yet ?
Sent from my VS980 4G using Tapatalk
krazie1 said:
Thanks, cool to,have both custom recovery options. Anyone do a backup yet ?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I did a backup with TWRP. Everything went smooth for me.
Sent from my Insane powered M8 using Tapatalk
awesome I've been waiting for a usable TWRP. Does it actually mount external SD card so we can backup to there?
Works awesome! Thanks.
Flashed and booted fine. Did not try it out yet. Thanks for updating.
krazie1 said:
Thanks, cool to,have both custom recovery options. Anyone do a backup yet ?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Backs up to the internal card fine but reboots into TWRP for me when I try to send a backup to the external SD.
Can't flash it with flashify
Sent from my HTC One VZW using Tapatalk 4
coldconfession13 said:
Can't flash it with flashify
Sent from my HTC One VZW using Tapatalk 4
Click to expand...
Click to collapse
Just used flashify, worked fine.
ocman40 said:
Just used flashify, worked fine.
Click to expand...
Click to collapse
Me too. No issues.
ocman40 said:
Just used flashify, worked fine.
Click to expand...
Click to collapse
Mike02z said:
Me too. No issues.
Click to expand...
Click to collapse
Worked fine for me as well.
Flashed via ADB. Can backup on SD Card! Thanks InvisibleK! :good:
Reflashed using ADB this time and still just restarts TWRP when trying to backup to my external SD card. There is plenty of room before someone asks
Mike02z said:
Reflashed using ADB this time and still just restarts TWRP when trying to backup to my external SD card. There is plenty of room before someone asks
Click to expand...
Click to collapse
Yea, it may help if there is room lolol!
Mike02z said:
Reflashed using ADB this time and still just restarts TWRP when trying to backup to my external SD card. There is plenty of room before someone asks
Click to expand...
Click to collapse
It restarted for me when I tried to backup to SD too. Then when I enabled compression it allowed me to make a backup to my SD card no problem.

Categories

Resources