Database Info

[TWRP] TWRP Recovery v2.3.2.3 For Micromax A89

So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Click to expand...
Click to collapse
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
CREDITS GOES TO YUWENG & BHARDIK :highfive:
All Credit goes to yuweng for creating the ROM and BHARDIK who has made CWM for A89 and helped compiling this tutorial.
And GREAT thanks to the Russian Master Shifu Javum, as he is the one that compile TWRP for our MT6577... :good:
Click to expand...
Click to collapse

dan.man said:
So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
Click to expand...
Click to collapse
I use this its awesome

Sir I have rooted my phone micromax q336 with kingroot but unable to flash twrp or any other custom recovery I am not having a pc ko please somebody

[ROM][CM12][MT6582][DG700]CyanogenMod 12.0 for Doogee TitanS2 DG700 [Philz Recovery]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
Code:
[SIZE="3"][FONT="Franklin Gothic Medium"]#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/[/FONT][/SIZE]
DEVELOPED BY @kashifmin and me.​
CLICK HERE TO KNOW MORE ABOUT THIS AWESOME DEVICE!​
This build is at the very much in alpha stage
Not working: ( We will soon fix RIL )
Video recording
GPS
Other small issues
CHANGELOGS:
Code:
[B][COLOR="Navy"]CM12 ALPHA1:[/COLOR][/B]
-First build
[B][COLOR="Navy"]CM12 ALPHA2:[/COLOR][/B]
- Plenty of bug fixes
INSTRUCTION TO FLASH CM12:
Please read 2nd post!
DOWNLOADS:
Stock KK ROM: https://drive.google.com/file/d/0B0UctMVP_ZFadC1QTW1RZGF5a2c/view?usp=sharing
Philz Recovery: https://www.androidfilehost.com/?fid=96042739161890883
CM12 ALPHA2: https://www.androidfilehost.com/?fid=24052804347766945
Source Code:
THIS ROM USES STOCK UNTOUCHED KERNEL!
CREDITS:
Cyanogenmod Team
@chrmhoffmann
axet
fire855
OmniROM team[/FONT]
XDA:DevDB Information
[ROM][CM12][MT6582][DG700]CyanogenMod 12.0 for Doogee TitanS2 DG700 [Philz Recovery], ROM for the Android General
Contributors
Santhosh M
ROM OS Version: 5.0.x Lollipop
Based On: CyanogenMod
Version Information
Status: Testing
Beta Release Date: 2015-06-30
Created 2015-05-27
Last Updated 2015-06-30

Flashing guide
PROCEDURE TO FLASH CYANOGENMOD 12 ON DOOGEE DG700​
STEP1: (Ignore this step if you are already on kitkat stock ROM )
Flash Kitkat stock ROM.
Please make sure your stock ROM's path doesn't have any space or the name is too long.
Open SP Flash tool and Load the scatter file MT6582_Android_Scatter.txt
Change Download Only to Firmware Upgrade.
Click on Download button and connect your phone.
STEP2: (this step involves flashing of recovery_dg700.img )
Power off your phone.
Open SP Flash tools and load the Kitkat stock ROM's MT6582_Android_Scatter.txt
Now Unselect all the options and select only RECOVERY.
Change the Location of RECOVERY to where recovery_dg700.img is located.
Now click on Download button and connect your phone.
Wait for the download to complete 100%. You will get an error, just ignore it and disconnect your phone.
STEP3:
Power on your phone and copy the ROM ( cm11-dg700-ALPHA1.zip ) to your internal sdcard.
STEP4:
Power off your phone.
Press and hold VOLUME UP + POWER button until you get a screen with three options.
Use VOLUME UP to select recovery and then press VOLUME DOWN to boot into recovery.
Now your phone will boot into recovery mode.
STEP5:
Now in the recovery mode use VOLUME UP and DOWN to Navigate and POWER button for OK.
Select Wipe and Format Options -> Clean to Install a New ROM.
Wait for the procedure to complete.
After it's done, use the Smart Key to back to main menu.
Now in the main screen, select Install Zip -> Choose zip from /storage/sdcard0 or sdcard1 ( whereever u have copied )
and then select the copied ROM zip file.
Now the ROM will install and after you are done, click on Reboot system Now on the main recovery screen.
It will boot into CM12 now!

Great work! May be it can ported to other Generic MT6582s

great work
GREAT WORK BRO...
i ported it to my device spice mi509...
and it is working great only bugs u said and sound not coming...
pls give me permission to post...!!!
please

saurabh1234 said:
GREAT WORK BRO...
i ported it to my device spice mi509...
and it is working great only bugs u said and sound not coming...
pls give me permission to post...!!!
please
Click to expand...
Click to collapse
Can u share how u ported ? Just by editing boot.img or something else ? Please share a guide link u used .. Bcuz lollipop is different ! Also share u used which android version as base rom >

Santhosh M said:
PROCEDURE TO FLASH CYANOGENMOD 12 ON DOOGEE DG700​
STEP1: (Ignore this step if you are already on kitkat stock ROM )
Flash Kitkat stock ROM.
Please make sure your stock ROM's path doesn't have any space or the name is too long.
Open SP Flash tool and Load the scatter file MT6582_Android_Scatter.txt
Change Download Only to Firmware Upgrade.
Click on Download button and connect your phone.
STEP2: (this step involves flashing of recovery_dg700.img )
Power off your phone.
Open SP Flash tools and load the Kitkat stock ROM's MT6582_Android_Scatter.txt
Now Unselect all the options and select only RECOVERY.
Change the Location of RECOVERY to where recovery_dg700.img is located.
Now click on Download button and connect your phone.
Wait for the download to complete 100%. You will get an error, just ignore it and disconnect your phone.
STEP3:
Power on your phone and copy the ROM ( cm11-dg700-ALPHA1.zip ) to your internal sdcard.
STEP4:
Power off your phone.
Press and hold VOLUME UP + POWER button until you get a screen with three options.
Use VOLUME UP to select recovery and then press VOLUME DOWN to boot into recovery.
Now your phone will boot into recovery mode.
STEP5:
Now in the recovery mode use VOLUME UP and DOWN to Navigate and POWER button for OK.
Select Wipe and Format Options -> Clean to Install a New ROM.
Wait for the procedure to complete.
After it's done, use the Smart Key to back to main menu.
Now in the main screen, select Install Zip -> Choose zip from /storage/sdcard0 or sdcard1 ( whereever u have copied )
and then select the copied ROM zip file.
Now the ROM will install and after you are done, click on Reboot system Now on the main recovery screen.
It will boot into CM12 now!
Click to expand...
Click to collapse
Is it include smart gestures in stock DG700 Rom?

Is this still being worked on?

Please make the file public as it is asking permission to access cm12 file. I have requested for access.

saurabh1234 said:
GREAT WORK BRO...
i ported it to my device spice mi509...
and it is working great only bugs u said and sound not coming...
pls give me permission to post...!!!
please
Click to expand...
Click to collapse
did you use spice mi509 lollipop image or kitkat image to port?

So Doogee gave u Source. how about share?

Update ( Alpha 2 )
Hi all,
Have released a bug fixed update to dg700 users. This is now a fairly usable build subject to certain small bugs.
( Bugs list has been updated in the thread with new download link for Alpha 2 )
Regards
Santhosh

Can this be ported to other generic MT6582s and if so could you point us to a guide ???
Any help is appreciated. Thanks

FLAmbuRNE1 said:
Can this be ported to other generic MT6582s and if so could you point us to a guide ???
Any help is appreciated. Thanks
Click to expand...
Click to collapse
There are already a guide out for mt6592. Just use them, its the same procedure.
B2T: Nvm that Doogee ain't gave u any source because they even announce this Thread on their fb page.

Is thr anyway to run this on devjce with kernal 3.10?

I partitioned the internal storage to 3 GB on stock kk rom.
If i flashed this rom , can I use EBR1 and EBR2 files which I flashed it before on stock rom?

Thnx

Moudy_moon said:
I partitioned the internal storage to 3 GB on stock kk rom.
If i flashed this rom , can I use EBR1 and EBR2 files which I flashed it before on stock rom?
Click to expand...
Click to collapse
No
Sent from my DG800

I installed Philz recovery, but when I go to recovery then I see black screen and my phone freezen. I must reconnect battery...
Is there Philz recovery already for DG700?
p.s.: my phone - DOOGEE-Titans2_DG700-Android5.0-R19-2015_05_12

After I flashed it, there is no root permission.
vroot doesn't root it anymore.

jasmesbond22 said:
I installed Philz recovery, but when I go to recovery then I see black screen and my phone freezen. I must reconnect battery...
Is there Philz recovery already for DG700?
p.s.: my phone - DOOGEE-Titans2_DG700-Android5.0-R19-2015_05_12
Click to expand...
Click to collapse
no recovery for lolipop unfortunately only previous versions

[RECOVERY] TWRP 3.0.2-1 Recovery for Micromax A106

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.0.2 For Micromax Unite 2
Disclaimer
Code:
#include
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
CHANGELOG for 3.0.2-0:
-
Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.
Click to expand...
Click to collapse
What's New In Update
Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
Add Greek translation to some builds.
Installation instructions
By PC
What’s required:
Code:
USB Cable / PC
[URL="http://www.chinaphonearena.com/forum/Forum-MTK-General-Tools"]SP Flash Tool or MTK Flash Tool[/URL]
[URL="http://www.chinaphonearena.com/forum/Forum-MTK-General-Tools"]ADB VCOM Drivers (normally I use PDAnet)[/URL]
Scatter file for your phone
recovery.img
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + power or volDown+power. Depending on your phone it will be one or the other. One way will bring you to factory mode, the other will bring you to recovery.
By Mobile
Root Required And Use Mobile Uncle tool/ Rashr/Flashify
BUGS:
Nope :victory:
Download Links :
TWRP 3.0.2-0 Recovery
Credits:
Dees_Troy (Developer Of TWRP)
EndLess (For Building Recovery And Fixing Invert Touch )
Charansai (For Helping In Porting Of recovery)
Ayush Rathore (For Testing & Porting Recovery)
Pranto (For Material TWRP)
All Testers For Testing
HIT THANKS THIS WILL NOT COST YOU​
XDA:DevDB Information
TWRP 3.0.2-1 Recovery, Tool/Utility for the Micromax A106 Unite 2
Contributors
Hell7, Charansai, Ayush rathore, Monty kumar
Source Code: http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392
Version Information
Status: Stable
Current Stable Version: V3
Stable Release Date: 2016-04-29
Created 2016-04-29
Last Updated 2016-05-03

Reserved

Reserved

Sperate Thread Nice
But ,Give Credits For @EndLess Also

Insllation method please
And 1 question can we install all custom roms through it

Vipul garha said:
Insllation method please
And 1 question can we install all custom roms through it
Click to expand...
Click to collapse
Added

Vipul garha said:
Insllation method please
And 1 question can we install all custom roms through it
Click to expand...
Click to collapse
Everything Is In OP Itself For PC .. Via Mobile Means Use Rashr or Flashify or Mobile Uncle Tools(Not Available Now In Gplay [If you want it means Download it from 3rd Party Websites] ) From Google Play ..
These Steps Will Be Suitable for Mobile Uncle Tools Only..
1) Download the Recovery Image
2) Rename it to recovery.img(change the Real Name(For Ex - MicromaxA106Recovery.img) of the Recovery image to "recovery"( No Quotations)
3) Move your img file from the Downloaded Folder to the Root of your Internal Storage
4) Now Open Mobile Uncle Tools & Grant Root Rights
5) Then Click Recovery Update Option, The You Will Find Your recovery.img file on the top ..
6) Click it , it will ask for Flashing ,Select OK then Reboot .. Voilà That's it ..
For Rashr & Flashify No Need of these Steps ..Just Install the App & Select the Download Image from Your Storage & Flash it ,Reboot It..
Good Luck ..
Yeah Via Custom Recoveries,You Can Install it.. That's What its all About ..

Added all method for flashing recovery via pc and without pc
Now hit thanks

Hell7 said:
Added all method for flashing recovery via pc and without pc
Now hit thanks
Click to expand...
Click to collapse
Add Instructions for Without PC ..Maximum Users Don't Want PC To do This..They Will Prefer the Easy Way(App) .. So if Can Update the Instructions For that..It'll Help New Users a Lot..

LoverBoy2415 said:
Add Instructions for Without PC ..Maximum Users Don't Want PC To do This..They Will Prefer the Easy Way(App) .. So if Can Update the Instructions For that..It'll Help New Users a Lot..
Click to expand...
Click to collapse
Its simple install app - download recovery img - open any given apk and flash
Well i add in mornings

Hell7 said:
Its simple install app - download recovery img - open any given apk and flash
Well i add in mornings
Click to expand...
Click to collapse
Hmmm ..

Mention Source Thread

How to port these for my xolo q1010i
I have 6mb of partition for recovery

Upside Down
weirdly the recovery is upside down for me

charansai said:
Mention Source Thread
Click to expand...
Click to collapse
Ohh i forgot wait i add

prabhuinbar said:
weirdly the recovery is upside down for me
Click to expand...
Click to collapse
Bug but working fine

[email protected] said:
How to port these for my xolo q1010i
I have 6mb of partition for recovery
Click to expand...
Click to collapse
Help him @charansai

[email protected] said:
How to port these for my xolo q1010i
I have 6mb of partition for recovery
Click to expand...
Click to collapse
Follow The Thread Here
Hit Thanks If I Had Helped You

yesh u can
Vipul garha said:
Insllation method please
And 1 question can we install all custom roms through it
Click to expand...
Click to collapse

Can I flash it via SPFT on my Unite 2 running stock KitKat? Btw, I'm having the 4 gig variant... It's my uncles phone & I wanna root it
TIA

[RECOVERY] [MT6735m] TWRP 3.0.2-0 Unofficial Port for ZTE Blade A410

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Recovery is an android phone with a very friendly and intuitive user-friendly interface and many options that make it easier to use, developed by Team TWRP and already in their most recent version with many corrections and adaptations for new equipment
Changelog last version:
TWRP 3.0.2-0 is out now for all currently supported devices.
What's new in 3.0.2-0:
Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
Add Greek translation to some builds.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
Source: https://twrp.me/
Install:
Method 1:
With Sp Flash tool
Download TWRP Port for ZTE Blade A410
Download Sp Flasf Tool
Open Sp Flash Tool Scatter-loading pressure in seeking the downloaded file and open Blade A410-MT6735M_Android_scatter.txt just mark them Recovery option
Press on Download connect the phone without battery and expect the process ends (green circle ok) :good:
Disconnect the phone you place the battery and lights in Recovery mode with Vol + / Power keys
Method 2
With FlashyFi
Download TWRP Port for ZTE Blade A410 copy recovery.img to sd card
Install FlashyFi and open navigate the file manager and select recovery.img
Wait to install at the end reboot into recovery mode
Screenshot:
Download
TWRP Port for ZTE Blade A410 ---> https://mega.nz/#!VggXUI4L!G_uXB6wqQy6PQ2ZYem9htNvWyt7feuIDK2KC__rA5mw
Sp Flash Tool ---> http://spflashtool.com/download/SP_Flash_Tool_v5.1628_Win.zip
FlashyFi ---> https://mega.nz/#!85xjHI7a!cSzkvXREPkyGa_QY-rTZmFzB1rzQdi9uAczSfx_jz8I
Credits:
Team TWRP
My
Coming soon: Custom ROM'S for ZTE Blade A410

Questions about custom ROM.
Are you working on a ROM based on Android Marshmallow?

Many thanks for this.
I have flashed corrupted rom from sp flash tool and my mobile is hard bricked. Will not turn on. Red Led light comes on when i connect charger or usb lead. What can i do to get it to turn on? Is there a flash rom that i can install?

Please can you teach me how to port the twrp? I want to port this to my devices: Dtac phone S2 which has same chip with you (MT6735m)
Thanks in advanced.

intex aqua raze twrp
Which twrp support aqua raze phone please suggests me ... I try many mt6735m twrp recovery but not boot into twrp recovery mode so please help me guy .....

plz i need recovery
Hey bro can you send me the rar or an active link to donwload the twrp recovery for the ZTE a410? plz the link upthere is dead and i need to flash that room plz if u can help me :c

Kateshi said:
Hey bro can you send me the rar or an active link to donwload the twrp recovery for the ZTE a410? plz the link upthere is dead and i need to flash that room plz if u can help me :c
Click to expand...
Click to collapse
Resurrected from my Recycle Bin . . .

THANKS!!!!!!!
THANKS A LOT BROO!!!!! :fingers-crossed:

[Unofficial][TWRP][MM] for YU Yunicorn

Note: This only works on Marshmallow version of official Yunicorn firmware. DO NOT FLASH ON LOLLIPOP.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Procedure:
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool.
2. Download twrp-recovery.zip.
3. Open and run "flash_tool.exe" as administrator from Sp Flash Tool folder.
4. Click on the scatter loading button and select the scatter file from the twrp-recovery folder.
5. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
6. Boot into recovery by pressing VOL UP + POWER button.
7. Flash Latest Magisk Module (Prefer this for root over SuperSU)
8. Wipe Dalvik Cache and reboot the system.
Now, you have successfully installed TWRP on your mobile.
BUGS
- You tell me

Which version of twrp is this ......

got stuck in bootloop.........
plz help:crying::crying::crying::crying:

hateis said:
Which version of twrp is this ......
Click to expand...
Click to collapse
TWRP 3.0.2
tariqr said:
got stuck in bootloop.........
plz help:crying::crying::crying::crying:
Click to expand...
Click to collapse
Please follow given instructions. Look at step 6,7 and 8. You will have to flash Magisk or SuperSu and wipe Dalvik Cache before booting system.

Thank you so much....

arun483 said:
Note: This only works on Marshmallow version of official Yunicorn firmware. DO NOT FLASH ON LOLLIPOP.
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Procedure:
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool.
2. Download twrp-recovery.zip.
3. Open and run "flash_tool.exe" as administrator from Sp Flash Tool folder.
4. Click on the scatter loading button and select the scatter file from the twrp-recovery folder.
5. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
6. Boot into recovery by pressing VOL UP + POWER button.
7. Flash Latest Magisk Module (Prefer this for root over SuperSU)
8. Wipe Dalvik Cache and reboot the system.
Now, you have successfully installed TWRP on your mobile.
BUGS
- You tell me
Click to expand...
Click to collapse
Is it stable and perfect...
How to unlock bootloader...
Any custom ROM build available...

New forum for rom development and porting for yu5530
https://forum.xda-developers.com/remix/supported-devices/yu-yunicorn-5530-t3735023

jowinjohnchemban said:
Is it stable and perfect...
How to unlock bootloader...
Any custom ROM build available...
Click to expand...
Click to collapse
Yes it is perfectly stable.
I don't think bootloader is locked, I don't remember, it's been a while since I used this device.
No custom roms are available as far I know.

[/COLOR @arun483
Could you please port new version of twrp (TWRP 3.2.3-0) for this device.
YU Yunicorn 5530
Android Marshmallow
Also Please post instructions for porting twrp for this device.