My|Phone Agua Rio - Android General

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specifications
CPU: Mediatek MT6582 (@1.3GHz) SoC
GPU: Mali 400MP
RAM: 1.0GB
Storage: 4GB (eMMC)
Display: 5.0" (IPS, Non-scratch resistant) @ 720x1280 resolution
Camera: 8MP main AF/led / 2.0mp front
GPS: Yes
Bluetooth: Yes
WiFi: Yes
Sensors: Accelerometer, Proximity, Ambient Light, Sound, Magnetic, Orientation
USB-OTG: Yes
SIM: Dual Standby (mini/regula SIM 1 and 2)
Battery: 2000mah
Colors: Black, White, Red, Orange, Blue, Green
Additional Information
*There are two models/version this phone have the S50on) and S5501(new version)
*Base on my test, My|Phone Agua Rio ( S5501) and Explay Fresh V1.00 are same

[ROM] MIUI v5 4.4.18 OTA SUPPORTED (My|Phone Agua Rio (S5501) and Explay Fresh V1.00)
Disclaimer: Flash at your own risk!
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this Patch before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. ALWAYS DO A BACKUP, BACKUP and LASTLY BACKUPS!
Click to expand...
Click to collapse
Description
MyPhone Agua Rio MIUI v5 4.4.18 for S5501 Model Only. This rom was ported from MIUI v5 for GFive A800 and supported by Ansuman Mahapatra @helloansuman MIUI Profile HERE of MIUI Official Developers so we can experience a weekly OTA update from MIUI.
OTA Updates will be released on every Saturday or Sunday.
And also working on Explay Fresh v1.00
ROM Link Click [
Screenshots Click Here
Features
Weekly OTA update
NOKIA X Keyboard
Extreme Scrolling
Init.d supported
Zipaligned
Swap Storage
Tweaks? Flash at your own risk!
You can now update to 4.4.25
Requirements
Download the ROM
BACK UP!
Reboot to CWM / TWRP
Wipe data/factory reset & Wipe Cache Partition & Wipe Dalvik Cache
Install from Sd card
Choose from sd card
Yes
Just wait to boot ( it may take up to 3-5 mins )
Enjoy!
NOTES
MIUI is rooted to enabled ROOT, go to Security app and go to permission then enable ROOT Permission.
Creating Xiaomi Account by email registration. Dont try to register using mobile number i got deducted 80 php load hahaha
To change english language in some options in theme/wallpaper app, JUST Go to APPS > Themes > Clear Data.
How to OTA UPDATE in MIUI
To update better to use twrp If cwm go to e install zip sd card - toggle signature - make it disabled - go to install sd card - go to downloaded_rom - flash the update then reboot system now
BUGS
You tell me!
CREDITS
XDA
CallMeX!!
Ansuman Mahaptra ( [email protected] Developer )
Sir Abdul Tarim ( [email protected] )
Sir Lorenzo Manuel Gimoto
Sir Ian Eric Ong​

[ROM] Reserved2
*Reserved

good specs and cheap

Good work brother add some screenshots.

Can anyone Help me Please
I tried updating my MPRio to the latest version then after reboot it got stucked at the CWM Recovery., I tried flashing the MIUI custom rom for Agua Rio but it doesnt help. im still stuck in the CWM Boot Loop. Can anyone help me? thanks a lot!

markuzzz said:
I tried updating my MPRio to the latest version then after reboot it got stucked at the CWM Recovery., I tried flashing the MIUI custom rom for Agua Rio but it doesnt help. im still stuck in the CWM Boot Loop. Can anyone help me? thanks a lot!
Click to expand...
Click to collapse
Same here Sir! How's your RIO? Any update Sir? TIA.

Problem Solved!
mamayangMalaya said:
Same here Sir! How's your RIO? Any update Sir? TIA.
Click to expand...
Click to collapse
Try flashing this one. extract the recovery.img then flash it. credits for ng0tkul4

markuzzz said:
I tried updating my MPRio to the latest version then after reboot it got stucked at the CWM Recovery., I tried flashing the MIUI custom rom for Agua Rio but it doesnt help. im still stuck in the CWM Boot Loop. Can anyone help me? thanks a lot!
Click to expand...
Click to collapse
markuzzz said:
Try flashing this one. extract the recovery.img then flash it. credits for ng0tkul4
Click to expand...
Click to collapse
Thanks Sir markuzzz.
I got an MPRIO s5501.... will this work?
I will try it anyway... or maybe you have a source where I can DL stock recovery for MPRIO s5501?
I already tried fixing it using SPFT and stock roms from MIUI and other sources but still stuck in CWM.
Need help badly!
Thanks.

mamayangMalaya said:
Thanks Sir markuzzz.
I got an MPRIO s5501.... will this work?
I will try it anyway... or maybe you have a source where I can DL stock recovery for MPRIO s5501?
I already tried fixing it using SPFT and stock roms from MIUI and other sources but still stuck in CWM.
Need help badly!
Thanks.
Click to expand...
Click to collapse
Hi,
MP AGUA RIO is now alive and kicking! :victory: SOLVED!
I flashed the Stock Recovery for S5500 you just gave/recommended...then the phone boot looped up to the LOGO...
Then I followed Sir Edmhar Laoag's Video Tutorial in YouTube (wwwDOTyoutubeDOTcom/watch?v=QAPFfsBNoNQ)
Kudos to all of you and also to Sir [email protected], who promptly answered my queries, enlightened me and gave recommendations on how to solve the problem!
Thanks to all of you guys!
Hope this thread helps a troubled AGUA RIO user/tweaker

Also for Wiko Rainbow ?
CallMeX!! said:
Description
MyPhone Agua Rio MIUI v5 4.4.18 for S5501 Model Only. This rom was ported from MIUI v5 for GFive A800 and supported by Ansuman Mahapatra @helloansuman MIUI Profile HERE of MIUI Official Developers so we can experience a weekly OTA update from MIUI.
OTA Updates will be released on every Saturday or Sunday.
And also working on Explay Fresh v1.00
Click to expand...
Click to collapse
Do you guys know if this works on the Wiko Rainbow ? I think this is the exact same phone, but I'm new to android and all this so I just would like to be sure !

Issue with FFCam and MCam
Hi Guys.
Quick question regarding MyPhone Agua Rio MIUI v5 4.4.18 for S5501 Model Only. I flashed this ROM to my MPA RIO and I'm now facing issues with my phone's front facing camera and main camera.
FF Cam - I can no longer access this as the button to tap vanishes as soon as the camera app loads.
Main Cam - The preview is upside down. When the I take photos, it is also upside down.
Anyone here that experienced the same issues? Desperate for a fix.
Regards,
Iwo

mamayangMalaya said:
Hi,
MP AGUA RIO is now alive and kicking! :victory: SOLVED!
I flashed the Stock Recovery for S5500 you just gave/recommended...then the phone boot looped up to the LOGO...
Then I followed Sir Edmhar Laoag's Video Tutorial in YouTube (wwwDOTyoutubeDOTcom/watch?v=QAPFfsBNoNQ)
Kudos to all of you and also to Sir [email protected], who promptly answered my queries, enlightened me and gave recommendations on how to solve the problem!
Thanks to all of you guys!
Hope this thread helps a troubled AGUA RIO user/tweaker
Click to expand...
Click to collapse
sir can u give me the stock rom for myphone rio. i have the same problem. my phone stucks.. it hangs with the logo of myphone.. pls help me to fix it.. thank you in advance..

Reply
masteriwo said:
Hi Guys.
Quick question regarding MyPhone Agua Rio MIUI v5 4.4.18 for S5501 Model Only. I flashed this ROM to my MPA RIO and I'm now facing issues with my phone's front facing camera and main camera.
FF Cam - I can no longer access this as the button to tap vanishes as soon as the camera app loads.
Main Cam - The preview is upside down. When the I take photos, it is also upside down.
Anyone here that experienced the same issues? Desperate for a fix.
Regards,
Iwo
Click to expand...
Click to collapse
UP
I am also experiencing the same problem,,anyone who has the solution? pls post it,i really like the MIUI rom,I dont want to change because of some cam problems,

I cant dl the files ts. It has removed?

Is this compatible for MyPhone Rio Aqua s5500.? Let me know so i can flash my phone to a new firmware like kitkat.

rom download
sir where can i download the rom . please help :crying: :crying: :crying: :crying:

Related

[ROM] [JB UPDATE] Ulefone Star N9776

Good News for fellow xda member that uses the same device ! Finally Ulefone Star N9776 has Jelly Bean ROM...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Full Credits to Aivars from forum.china-iphone.ru, he has taken the effort to backup his Factory ROM, upload it & share with us...
What i did was cook it with Android Kitchen, add Root & Busybox & thats it, clean pre-rooted Factory ROM that can be install with any custom recoveries to any N9776...
Pls make sure you have the correct 4-in-1 Combo Chip before installing...
Having said that, pls pls make a nandroid backup first before installing it as it replace the boot.img & system partition... :fingers-crossed: If you don't like it then you can any time roll it back via nandroid restore...
Please also make sure you have 100% the same device or you will end up like them here ! ( That is including me... No worries, TP has been identified here )
Its very unique for Ulefone Star N9776 that comes with a plastic perspex holder for the device... It also has the Ulefone label at the bottom of this holder...
Credits
Aivars for sharing with us his latest N9776 JB ROM
Master Shifu dsixda for sharing with us his super easy to use & fabulous Android Kitchen
JB Update For MT6628 ONLY
Download link - For MT6628 4-in-1 Combo Chip ONLY
: N9776-e1911_v77_gq2000_a41_6628_v20 ( recovery update.zip )
Added on June 29, 2013 - LeWa for Star N9776 with MT6628 chipset
Fellow xda friend zetty has successfully ported a fully working LeWa...
------------------------------------------
JB Update For MT6620 ONLY
Added on Feb 17, 2013 - Jelly Bean Update for Star N9776 with obsolete MT6620 chipset
Good News for Star N9776 users with obsolete MT6620 chipset, after all we can also have Jelly Bean update...
Everything is working out of the box, Full Credits to X-Dron from china.iphone.ru...
Below are the screenshot...
Just flash Aivars JB boot.img & system.img ONLY from X720D...
Download link
HaiPai_X720D_A​ndroid_4.1.1
Aivar's JB boot.img
Minor glitch : Delete Camera shortcut from the HOME screen & then hold the camera icon from app drawer & drop it back to the HOME screen. Do the same for SMS...
------------------------------------------
Added on Feb 24, 2013 - Ritmix RMP-600 JB ROM
Credits to s-bd he has share a link here...
Same procedure as above -> Flash only Aivar's JB boot.img & system.img ONLY from this ROM...
------------------------------------------
Added on Mar 16, 2013 - ZTE V970 JB ROM
Download ZTE V970 custom ROM here & install my patch file here via custom recovery...
Credits to Master Shifu bgcngm...
------------------------------------------
Added on Mar 17, 2013 - Lewa JB ROM
Lewa updates their ROM on friday every week but i can't possibly be updating their every week updates...
So i wrote a simple program here so that you guys can DIY ...
Latest OS5 Porting Tool is here...
Credits : Lewa OS Team...
------------------------------------------
Added on Apr 28, 2013 - Lewa JB ROM - 12Mpx Cam Support
Credits to Gramozdila from china-iphone.ru that discover it, now we have 12Mpx cam support on our N9776...
Auto port program is here...
Credits : Lewa OS Team...
------------------------------------------
Added on Mar 21, 2013 - Amoi JB ROM
Download link : here Credits : Gramozdila from china-iphone.ru
------------------------------------------
Added on Mar 25, 2013 - Official JB ROM e1911_v77_gq2000_a41_6628_v20 -> MT6620 everything WORKS
Credits to kumar abhishek for sharing his porting techniques & s_bd for sharing the link, it is proven that MT6628 can be back port to work on MT6620 after all...
Download link : here
------------------------------------------
Added on Mar 29, 2013 - MMX A110 JB ROM
Since the MMX A110 thread ported own JB ROM, now i ported back their JB ROM to work on ours...
Download link : here
------------------------------------------
For both MT6620 & MT6628
Custom Recoveries
Can be use on both MT6620 & MT6628 Mediatek's 4-in-1 Combo Chip
Download link : CWMR 6.0.2.8
Download link : TWRP 2.4.2.0
Credits
Aivars for sharing with us his latest N9776 JB ROM
Master Shifu bgcngm for CWMR 6.0.2.8
Master Shifu Javum & RD varun.chitre15 for TWRP V2.4.2.0
------------------------------------------
GPS fix via EPO
Credits to R-mihee at forum.china-iphone.ru....
Steps
1. Settings -> Location Services -> Turn off GPS, EPO, A-GPS.
2. Use any Root Explorer & delete /data/misc/mtkgps.dat
3. Reboot your phone.
4. Go out into the open
5. Enabled in GPS, A-GPS, EPO -> Download ( if you don't use 3G data, you can use Wi-Fi too )
6. Dial * # * # 3646633 # * # * will bring you to the MTK engineering menu , select YGPS. Go to Information tab & click Full, and then Cold, then A-GPS restart. Go back to the Satellite tab and wait for the signal to be recorded (this may take a few minutes & up to ten minutes on the first setup).
6. Exit & start any GPS software & you will get 23870ms or less GPS fix
------------------------------------------
Mediatek MT6575 Star N9776
Added on Feb 14, 2013 - Notice
Just did some thread following up on china.iphone.ru...
it turns out that there are emergence of cheaper version of N9776 & i thought to myself how the price dropped so fast & it turns out that it is indeed the cheaper version MT6575...
MT6575 is Pin-to-pin compatible with MT6577 so some clever manufacturer instead of upgrading, they are downgrading N9776... :laugh:
So pls make sure & don't just flash blindly, this JB ROM update is only for MT6577...
Credits : Bulletproof from china-iphone.ru, he has backup his MT6575 Factory ROM via MtkDroidTools...
Download link : Star N9776 based on MT6575 SoC ONLY
------------------------------------------
Added on Feb 25, 2012
Operation to Support & Reward our MTK SoC Developers
Head up to here & show your support...
Hello, WiFi is working for you? I can't turn it on, slider just go back to off position. But everything else is fine.
Gr8 tnx it will help mmx A110 users a lot. I posted ur rom in mmx A110 thread. Hope u permit to use it
@Bugscze
Yes, i can switch on GPS, Bluetooth & Wi-Fi & it did connect... Very stable no FC while i tested it... :fingers-crossed:
However, i didn't do a 100% test on it as i switch back to my own ported Lewa OS, love the Lewa ui better than JB...
AFAIK, there are 2 version of hardware for N9776, ov5647 that uses MT6620 & 9p017 uses 6628, which hardware do you have
As said, this update is directly cook without adding any sauce or spice & i believe it works better on 6628 since its from 6628 ROM...
@kumar abhishek
Bad news for you, bro... JB ROM wouldn't boot without JB boot.img....
yuweng said:
@Bugscze
Yes, i can switch on GPS, Bluetooth & Wi-Fi & it did connect... Very stable no FC while i tested it... :fingers-crossed:
However, i didn't do a 100% test on it as i switch back to my own ported Lewa OS, love the Lewa ui better than JB...
AFAIK, there are 2 version of hardware for N9776, ov5647 that uses MT6620 & 9p017 uses 6628, which hardware do you have
As said, this update is directly cook without adding any sauce or spice & i believe it works better on 6628 since its from 6628 ROM...
@kumar abhishek
Bad news for you, bro... JB ROM wouldn't boot without JB boot.img....
Click to expand...
Click to collapse
But ur rom inclides jb boot.img
yuweng said:
Good News for fellow xda member that uses the same device ! Finally Ulefone Star N9776 has Jelly Bean ROM...
Full Credits to Aivars from forum.china-iphone.ru, he has taken the effort to backup his Factory ROM, upload it & share with us...
What i did was cook it with Android Kitchen, add Root & Busybox & thats it, clean pre-rooted Factory ROM that can be install with any custom recoveries to any N9776...
Having said that, pls pls make a nandroid backup first before installing it as it replace the boot.img & system partition... :fingers-crossed: If you don't like it then you can any time roll it back via nandroid restore...
Download link
: N9776-e1911_v77_gq2000_a41_6628_v20_130108 ( recovery update.zip )
I have also ported custom recoveries for N9776
: CWMR 6.0.1.5
: TWRP V2.3.2.3
Use this tool to flash above custom recoveries...
Please make sure you have 100% the same device or you will end up like them here ! ( That is including me... No worries, TP has been identified here )
Its very unique for Ulefone Star N9776 that comes with a plastic perspex holder for the device... It also has the Ulefone label at the bottom of this holder...
Credits
Aivars for sharing with us his latest N9776 JB ROM
Master Shifu dsixda for sharing with us his super easy to use & fabulous Android Kitchen
erLucky for CWMR 6.0.1.5
Master Shifu Javum for TWRP V2.3.2.3
Enjoy...
Click to expand...
Click to collapse
hey how to install this rom
yuweng said:
@Bugscze
Yes, i can switch on GPS, Bluetooth & Wi-Fi & it did connect... Very stable no FC while i tested it... :fingers-crossed:
However, i didn't do a 100% test on it as i switch back to my own ported Lewa OS, love the Lewa ui better than JB...
AFAIK, there are 2 version of hardware for N9776, ov5647 that uses MT6620 & 9p017 uses 6628, which hardware do you have
As said, this update is directly cook without adding any sauce or spice & i believe it works better on 6628 since its from 6628 ROM...
Click to expand...
Click to collapse
Thank you for answer. It's true, ROM is stable and fast but that damn wifi. My friend bought this phone in January 2013 so it should be with newer hardware. Hardware version number can be found in Engineering menu right? I'll check it.
Do you know anything about kernel source codes for MTK6577? I can't find any. :crying:
I found solution for wifi problem: http://forum.xda-developers.com/showpost.php?p=36981667&postcount=3
yuweng said:
Good News for fellow xda member that uses the same device ! Finally Ulefone Star N9776 has Jelly Bean ROM...
Full Credits to Aivars from forum.china-iphone.ru, he has taken the effort to backup his Factory ROM, upload it & share with us...
What i did was cook it with Android Kitchen, add Root & Busybox & thats it, clean pre-rooted Factory ROM that can be install with any custom recoveries to any N9776...
Having said that, pls pls make a nandroid backup first before installing it as it replace the boot.img & system partition... :fingers-crossed: If you don't like it then you can any time roll it back via nandroid restore...
Download link
: N9776-e1911_v77_gq2000_a41_6628_v20_130108 ( recovery update.zip )
I have also ported custom recoveries for N9776
: CWMR 6.0.1.5
: TWRP V2.3.2.3
Use this tool to flash above custom recoveries...
Please make sure you have 100% the same device or you will end up like them here ! ( That is including me... No worries, TP has been identified here )
Its very unique for Ulefone Star N9776 that comes with a plastic perspex holder for the device... It also has the Ulefone label at the bottom of this holder...
Credits
Aivars for sharing with us his latest N9776 JB ROM
Master Shifu dsixda for sharing with us his super easy to use & fabulous Android Kitchen
erLucky for CWMR 6.0.1.5
Master Shifu Javum for TWRP V2.3.2.3
Enjoy...
Click to expand...
Click to collapse
heyy its not working the phone kepps rebooting after installing it
cena191 said:
heyy its not working the phone kepps rebooting after installing it
Click to expand...
Click to collapse
@kumar abhishek
yea..same here...only the bootlogo appear again and again...cudnt establish adb connection too.. so no logcat possible..
mmxa110user said:
@kumar abhishek
yea..same here...only the bootlogo appear again and again...cudnt establish adb connection too.. so no logcat possible..
Click to expand...
Click to collapse
Glad I had a backup
Bugscze said:
Do you know anything about kernel sources codes for MTK6577? I can't find any. :crying:
Click to expand...
Click to collapse
Only Alcatel publish their MT65xx source code (ICS not JB) but i'm afraid it might not be compatible for use on our N9776... :fingers-crossed:
AFAIK, OT_997D_20121228.tar.xz is one of the MT6577, rest you have to google for it...
@kumar abhishek & guys
AFAIK, boot.img is device specific & it contains kernel & its meant for N9776 so it would not boot on MMX A110... :fingers-crossed:
Tried porting JB ROM to my Lenovo A789 since last year, non booted up so you guys can forget about it... Sorry if it sound disappointing... :laugh:
Even latest LeWa_ROM_AMOI_N820_JB doesn't boot on N9776 JB boot.img but it does show logcat activities & died...
Does anyone else have problem with screen when in call? Mine gets flashing and not touchable until call ends..
Hi, you need to recalibrate the light sensor, under settings, display, als_ps calibration. place your finger over the sensor at the top to the right of the speaker and hit calibrate. hope this helps.
On a different note, does anyone know how to repartition the nand so as to ditch the internal SD? The old ways don't work....
How do you feel the phone with jelly bean? Isn't it slow cause of the small RAM? Or it's better than ICS?
gerstavros said:
How do you feel the phone with jelly bean? Isn't it slow cause of the small RAM? Or it's better than ICS?
Click to expand...
Click to collapse
No, it feels a lot smoother to me. camera is definately better. battery life a lot better also. no more problems with ram than i had on ics. However, dont like the fact that you have two signal bars, whereas in ics if sim2 was missing it would hide the second signal meter. it was an arse to root and i cant seem to repartition it!
Turbojo said:
No, it feels a lot smoother to me. camera is definately better. battery life a lot better also. no more problems with ram than i had on ics.
Click to expand...
Click to collapse
Nice!
Turbojo said:
However, dont like the fact that you have two signal bars, whereas in ics if sim2 was missing it would hide the second signal meter.
Click to expand...
Click to collapse
What do you mean? I never saw second signal bar to ger removed when no sim inserted, in any mediatek phone
Turbojo said:
it was an arse to root and i cant seem to repartition it!
Click to expand...
Click to collapse
This Rom isn't rooted? How did you root it? I root any mtk6577 ics or jelly bean phone with root by binary or zhuodashi.
ICS hid the second signal meter if no sim was inserted on the N9776.
Binary ect doesn't work, you have to cook cwm recovery and flash that way. there is a thread here: http://forum.xda-developers.com/showthread.php?t=1923764
gerstavros said:
How do you feel the phone with jelly bean? Isn't it slow cause of the small RAM? Or it's better than ICS?
Click to expand...
Click to collapse
wer is d jb rom for mmx a110
Turbojo said:
ICS hid the second signal meter if no sim was inserted on the N9776.
Binary ect doesn't work, you have to cook cwm recovery and flash that way. there is a thread here: http://forum.xda-developers.com/showthread.php?t=1923764
Click to expand...
Click to collapse
So, i can do it with the twrp you have in the first post, right?

[Rom][[Allwinner-A13]]UNOFFICIAL Cyanogenmod 10.1

Allwinner A13, Cyanogenmod 10.1​
This is the first CyanogenMod 10.1 custom Firmware 4 the Allwinner A13
This Firmware is from http://tabdev.tk/index.php?topic=67.0 i create this theard for the english users, the other theard is Polski !!!
The Cyanogenmod 10.1 build is a firmware image and has CWM pre installed.
I have 3 versions for you:
Version 1 is for MID13 tablet's
Version 2 is for MID08 tablet's
Version 3 is for MID08S z 2013 tablet's
If you have a Q8,Q88 etc. you musst download the MID08S z 2013 version.
How to flash the Firmware
First you Install Live Suite 1.11 and the drivers
Than you Flash The FW
Download
MID13: http://www.4shared.com/rar/Z6cmisbP/A13_CM101_MID13_v1.html
MID08: http://www.4shared.com/rar/uC1WBA6T/A13_CM101_MID08_v1.html
MID08S z 2013: http://www.4shared.com/rar/kVGQz6FT/A13_CM101_MID08S_v1.html
Wi-fi Fix
http://www.4shared.com/zip/5f2aaE-J/Pakiet_zgodnoci_wi-fi_cm101__2.html
Live Suite 1.11
http://catshare.net/9c5r60MKjVMtIMss/LiveSuitPack_1.11.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Would it work on other A13 tablets? I got a Wintouch Q75S. I should maybe configure the drivers and modify the rom?
Im trying to update this cheap chinese ;
All Winner A13 TW-Q8 Model
Currently it has 4.1.2
the posted Cyanogenmod 10.1 shows Android 4.2.2 is that correct? Do you think this device will ever get the more efficient KitKat 4.4.2 ?
When I run the Live Suit and try to install the MID08S z 2013 Rom, it starts then stops at 0% and says Upgrade fails : Ox162 (and strange characters)
thanks
Do USB bluetooth dongles work with this?
I noticed
https://github.com/linux-sunxi/linux-sunxi/blob/sunxi-3.4/drivers/bluetooth/btusb.c
has Cambridge Silicon Radio dongles blacklisted.
CyberPK made 3.0.8+ modules here
http://forum.xda-developers.com/showpost.php?p=40980305&postcount=151&nocache=1&z=420924045611172
but modinfo on btusb.ko shows it was built with the csr blacklisted.
Maybe this will help
http://www.arctablet.com/blog/forum...oms-development-croms/cm10-1-bluetooth-works/
https://community.freescale.com/docs/DOC-93985
Cybercom684 said:
Allwinner A13, Cyanogenmod 10.1​
This is the first CyanogenMod 10.1 custom Firmware 4 the Allwinner A13
This Firmware is from http://tabdev.tk/index.php?topic=67.0 i create this theard for the english users, the other theard is Polski !!!
The Cyanogenmod 10.1 build is a firmware image and has CWM pre installed.
I have 3 versions for you:
Version 1 is for MID13 tablet's
Version 2 is for MID08 tablet's
Version 3 is for MID08S z 2013 tablet's
If you have a Q8,Q88 etc. you musst download the MID08S z 2013 version.
How to flash the Firmware
First you Install Live Suite 1.11 and the drivers
Than you Flash The FW
Download
MID13: http://www.4shared.com/rar/Z6cmisbP/A13_CM101_MID13_v1.html
MID08: http://www.4shared.com/rar/uC1WBA6T/A13_CM101_MID08_v1.html
MID08S z 2013: http://www.4shared.com/rar/kVGQz6FT/A13_CM101_MID08S_v1.html
Wi-fi Fix
http://www.4shared.com/zip/5f2aaE-J/Pakiet_zgodnoci_wi-fi_cm101__2.html
Live Suite 1.11
http://catshare.net/9c5r60MKjVMtIMss/LiveSuitPack_1.11.exe
Click to expand...
Click to collapse
Hi does this rom will work on Softwinner N900 ( A13 ) tablet with stock android 4.0.4???
EDIT/
Just flashed mid 13 and its ok
wifi is working without fix flashig
No bugs at monent now flashing pure performance and will report antutu score in some min.
Edit 2
Antutu score is 4735 not but ! ( on stock rom was 4600 without pure performance )
Found some bugs
rotation and camera is not working.
I installed cpu-z and in sensor section is showing none sensor.
I tryed install modules from cm 10 but no luck.
Can u pls help me to ! to get working camera and rotation
THX u
USB debugging
richish said:
Hi does this rom will work on Softwinner N900 ( A13 ) tablet with stock android 4.0.4???
EDIT/
Just flashed mid 13 and its ok
wifi is working without fix flashig
No bugs at monent now flashing pure performance and will report antutu score in some min.
Edit 2
Antutu score is 4735 not but ! ( on stock rom was 4600 without pure performance )
Found some bugs
rotation and camera is not working.
I installed cpu-z and in sensor section is showing none sensor.
I tryed install modules from cm 10 but no luck.
Can u pls help me to ! to get working camera and rotation
THX u
Click to expand...
Click to collapse
USB debugging is not enable by default when the rom is installed. So you can't use ADB to flash anything . Can you enable usb debugging so that we can use ADB out of the box?
No WiFi
@Cybercom684 ive just flashed the MID08S z 2013 and wifi is not working even with the wifi fix can you or someone help me please
Wilsonb said:
Im trying to update this cheap chinese ;
All Winner A13 TW-Q8 Model
Currently it has 4.1.2
the posted Cyanogenmod 10.1 shows Android 4.2.2 is that correct? Do you think this device will ever get the more efficient KitKat 4.4.2 ?
When I run the Live Suit and try to install the MID08S z 2013 Rom, it starts then stops at 0% and says Upgrade fails : Ox162 (and strange characters)
thanks
Click to expand...
Click to collapse
Hi @Wilsonb mate could you post me your stock backup img please mine is corrupt so cant restore and the wifi won't work on this rom
Does the Kernel Support OverClocking??
Hi, I have Polaris QA88, allwinner a13
but when i try to flash it using phoenixsuit, nothings happen.
Can anyone convert to install ROM with CWM?
Thanks
please reupload the wifi fix
hamlet exagerate zeligpad 3g 970h3g rom
hello does it works fine with an hamlet exagerate zeligpad XZPAD970H3G? i use this tablet for skype, to surf in web, play a video, and i must use 3g connection and webcam..please let me know and sorry for my (bad) english.
thank you...
Maher88 said:
please reupload the wifi fix
Click to expand...
Click to collapse
+1
kiodo1981 said:
+1
Click to expand...
Click to collapse
i found this fix but i don't know 100% this is from this ROM
Testing at your own risk
Wirusx said:
i found this fix but i don't know 100% this is from this ROM
Testing at your own risk
Click to expand...
Click to collapse
Thanks but WiFi doesn't work.
Hello All,
I have a China Tablet Pendo, want to upgrade to Cyanogenmod. It has AL-A13Q8, Rev:5.0 written on the mother board so I tried MID08S z 2013: http://www.4shared.com/rar/kVGQz6FT/...MID08S_v1.html but while Flashing at the last stage it says Update Error, Can't open Part....something something. Please help me to update.
---------- Post added at 01:15 PM ---------- Previous post was at 01:14 PM ----------
shankarupadhayaya said:
Hello All,
I have a China Tablet Pendo, want to upgrade to Cyanogenmod. It has AL-A13Q8, Rev:5.0 written on the mother board so I tried MID08S z 2013: http://www.4shared.com/rar/kVGQz6FT/...MID08S_v1.html but while Flashing at the last stage it says Update Error, Can't open Part....something something. Please help me to update. Thank you in advance......
Click to expand...
Click to collapse
Sorry but...
Sorry but my table CMX RAPAX LE 070-0508 is stuck on logo,then logo becomes crazy.
Hi,
I got this N900 (softwinners) with nuclear board. (Stock Android 4.0.4)
It has a Allwinner A13 CPU (ARM Cortex-A8 @ 1008 MHz.
&
A Mali-400 MP1 GPU.
As I can see, there are many, very similar chinese Tablets like this one, but it looks like this ROM would fit ?! :S
Build date is 2013.01.06, so I guess I go for the No.1 link...but it says 300kb only in size...and I cant really download...without registering to that annoying site...

[ROM] [MIUIv5-4.8.29] For Archos 50 neon [MT6582] [4.2.2JB] [CTRv2.7]

*Proceed at your own risk.
*I'm not responsible for bricked devices, dead sd cards.
*I'ts only compatible with Archos 50 neon not 50b & 50c or 45
Click to expand...
Click to collapse
Hello I just ported MIUI for the Archos 50 neon from this rom : [ROM] [MIUIv5-4.8.29] [MT6582] For Innjoo i1 ALL credits to @arnabgharay , @SAM209 & Xiaomi:good:
I also ported CarlivTouchRecovery v2.7 for the Archos 50 neon only not 50b,50c or 45
-Features:
*100% Pure fully functional MIUI.
*Everything working and tested : RIL,Camera,WIFI,Bluetooth,sensors,Sound.USB,and anything you can think of.
*Very smooth with no lag.
-Changelog:
~1.0~initial release~
fix the 1GB of ram problem of @SAM209 ROM it shows 515 MB
-Bugs:
1-only english is fully supported, other languages are'nt fully displayed
2-You tell me.
-Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Instructions:
1-Root your device. (for me i used this tutorial)
2-Install CTR Recovery (Use Flashify to flash the recovery.img or this tutorial(but fastboot doesnt work on my Archos))
3-Backup your current ROM using CTR or the original factory stock rom can be found here.
4-Download the ROM.
5-Copy miui_4.8.29_a50ne_4.2.2JB_Mar974.zip to your SD card.
6-Turn Off your device.
7-Boot to CTR using Volume down + power button combo.
8-Wipe Menu > Wipe Data - Factory Reset > Wipe Cache > Wipe Dalvik Cache .
9-Select "Install zip from SD card" select the ROM .zip, have a cup of coffee or whatever and wait for it to finish (play minecraft ... no it's a joke :laugh.
10-Reboot & set-up MIUI.
11-Flash Gapps like step 9.
11-Reboot and enjoy.
-Downloads:
miui_4.8.29_a50ne_4.2.2JB_Mar974.zip or mirror
CTRv2.7 for JB 4.2.2 or mirror for archos 50 neon only not 50b , 50c &45
-Credits:
- Xiaomi : For creating MIUI in the first place.
- @arnabgharay & @SAM209 : For MIUI rom that I used as a base .
- @carliv for the recovery.
- Archos for the stock rom and phone.
Please report any bugs you find & request any modifications you'd like.
Give me a thanks does not kill you
XDA:DevDB Information
[ROM] [MIUIv5-4.8.29] For Archos 50 neon [MT6582] [4.2.2JB] [CTRv2.7], ROM for all devices (see above for details)
Contributors
Mar974, SAM209, arnabgharay, Xiaomi
Source Code: http://forum.xda-developers.com/android/development/rom-innjoo-i1-t2988125
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock JB 4.2.2
Based On: MIUI
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2015-09-24
Created 2015-09-24
Last Updated 2015-09-25
Reserved
Hello guys! I have a problema with my 50 Neon device. I have bricked it with a bad rom flashing. I am trying to find the stock firmware to be installed with sp flashtool instead of recovery. My computer detect it as modem so i think i can flash it with this tool. But the room on the Archos web is only to be flashed via recovery.
Coudl you give me a hand? I am desesperated.
Thanks to all of you and sorry for my horrible english...
alquick said:
Hello guys! I have a problema with my 50 Neon device. I have bricked it with a bad rom flashing. I am trying to find the stock firmware to be installed with sp flashtool instead of recovery. My computer detect it as modem so i think i can flash it with this tool. But the room on the Archos web is only to be flashed via recovery.
Coudl you give me a hand? I am desesperated.
Thanks to all of you and sorry for my horrible english...
Click to expand...
Click to collapse
Hello try to flash CWM with MTK droid tool folowing this tutorial : https://www.youtube.com/watch?v=lEFcsQ8gC1E using the boot.img from the stock rom zip from Archos.
and you can flash the boot.img and recovery.img with sp flash tool : https://www.youtube.com/watch?v=0R36ssKt6V4 using the stock rom from archos.
and What is your OS ? i know that they are some problem with windows 8 or 10 better use windows 7
Hope i helped you.
Hey,
thank you very much for the amazing project, it works just fine.
I wonder where can i find/add an icon to open up the menu which includes all programs installed?
Kindly advise
my archos 50 neon is stock on bootlop and on cwm i cant connect to my pc please help me
Thanks
Thank you and all people involved with it for developing a custom rom for archos 50 neon. I flashed your custom rom after i accidentally kind of killed my android (dont ask why, its a stupid reason). It works really fine
I am happy with it. It has some function I always wanted to have on my phone, but couldnt and admired other phones for that.
A question : In the changelog you wrote that you fixed some 1 GB RAM problem, that it showed 515 MB RAM. What is that about ? I didnt really understand what you mean with that. My Phone shows 515 MB
PLEASE GUYS, can i get an upgrade for my archos 50neon jellybean to lollipop or marshmallow?
thanks.
the custom rom and recovery would be appreciated. **THUMBSUP**
JOLLYNERY said:
PLEASE GUYS, can i get an upgrade for my archos 50neon jellybean to lollipop or marshmallow?
thanks.
the custom rom and recovery would be appreciated. **THUMBSUP**
Click to expand...
Click to collapse
Sorry since Archos didn't develop Android 4.4 for this phone i cannot port any other rom
Upgrade 50neon
Thanks bro.
So it means I have to stick to this one posted here huh?
One more question. I observed that when I signed into my Gmail account with this archos 50neon, Gmail sent me a security message saying that I an ACER ICONIA just signed in to tat account . What can you say about that ? I HD be been thinking about the compatibility of Acer iconia ROM on this archos 50neon.
And wat is @Rumeya talkin about .
JOLLYNERY said:
Thanks bro.
So it means I have to stick to this one posted here huh?
One more question. I observed that when I signed into my Gmail account with this archos 50neon, Gmail sent me a security message saying that I an ACER ICONIA just signed in to tat account . What can you say about that ? I HD be been thinking about the compatibility of Acer iconia ROM on this archos 50neon.
And wat is @Rumeya talkin about .
Click to expand...
Click to collapse
I will try to port more ROMS maybe later but still in 4.2.2 because the bootloader 4.2.2 is not compatible with 4.4.4 or later and Archos will not devellop any new rom for this phone
The Acer iconia use the same SoC so google maybe mess up or the ROM i port come from an acer iconia didn't know cause i find a working ROM that i can port from here : http://forum.xda-developers.com/android/development/rom-innjoo-i1-t2988125
Porting ROM for mt6582 SoC is really simple since Archos give us the stock 4.2.2 ROM with recovery.img and all the system files i will try to port 4.4.4 rom but I'm afraid of briking the phone cause the bootloader is not mean for.
Hope you will find this ROM better than the stock and i cannot promise to make any new ROM since this phone is not mine.
RE:
Mar974 said:
I will try to port more ROMS maybe later but still in 4.2.2 because the bootloader 4.2.2 is not compatible with 4.4.4 or later and Archos will not devellop any new rom for this phone
The Acer iconia use the same SoC so google maybe mess up or the ROM i port come from an acer iconia didn't know cause i find a working ROM that i can port from here : http://forum.xda-developers.com/android/development/rom-innjoo-i1-t2988125
Porting ROM for mt6582 SoC is really simple since Archos give us the stock 4.2.2 ROM with recovery.img and all the system files i will try to port 4.4.4 rom but I'm afraid of briking the phone cause the bootloader is not mean for.
Hope you will find this ROM better than the stock and i cannot promise to make any new ROM since this phone is not mine.
Click to expand...
Click to collapse
THANKS ALL THE SAME BRO! HOPE TO HEAR FROM YOU WHEN YOU COME UP WITH IT.:good:
jollynery said:
thanks all the same bro! Hope to hear from you when you come up with it.:good:
Click to expand...
Click to collapse
and less i forget. Would there b any hitch if i decieve to flash d rom and recovery without the gapp.?
Apologize for disturbing
using CWM instead of CTR RECOVERY when flashin MIUI
Mar974 said:
Reserved
Click to expand...
Click to collapse
Please can i just install the MIUI alone without the CTR RECOVERY. becasuse i generated CMW for this my Archos 50NEON using MTKDROID TOOL.?
thanks.
JOLLYNERY said:
and less i forget. Would there b any hitch if i decieve to flash d rom and recovery without the gapp.?
Apologize for disturbing
Click to expand...
Click to collapse
there are any problem if you don"t flash gapps you will just not have the playstore thats all
JOLLYNERY said:
Please can i just install the MIUI alone without the CTR RECOVERY. becasuse i generated CMW for this my Archos 50NEON using MTKDROID TOOL.?
thanks.
Click to expand...
Click to collapse
I didn't know if this will work but you can try it at your own risk but flashify will flash CTR easily for you if you are rooted
Dunno if someone is still interested in this device, anyway it would be great to have an ANSP port:
https://forum.xda-developers.com/android/general/android-source-proeject-gm-discovery-t2931201
Interesting
forart.eu said:
Dunno if someone is still interested in this device, anyway it would be great to have an ANSP port:
https://forum.xda-developers.com/android/general/android-source-proeject-gm-discovery-t2931201
Click to expand...
Click to collapse
It's interesting i will take a look at it and will try on my old archos Thanks
Mar974 said:
It's interesting i will take a look at it and will try on my old archos Thanks
Click to expand...
Click to collapse
Well then, if you port please share it.
Hello, i am having Archos 50 Diamond (gsmarena.com/archos_50_diamond-7042.php) with stock Android 4.4.4. Shoul i try to install this ROM. Am i risking my current (stock) recovery can be made not working? (i do not understand Android workings)
Or only risk is that i would have to install again the stock firmware using my stock recovery mode (Service menu)?
My touch screen is not reacting on touch and my aim is to connected USB hub with mouse and keyboard. Do you see the way for me please?

[PORT][ROM][6.0.1][CM13][UNOFFICIAL] Resurrection Remix | Wiko Getaway [MT6582]

Hi,
This is a ResurrectionRemix-M 6.0.1 PORT for Wiko Getaway, based on RR-M for MT6582 (compiled and shared by MTK Hacker Pro )
original ROMS: https://plus.google.com/+AjitUchiha/posts
Disclaimer:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Compatible Devices: Possible works on Wiko Getaway Clones, like:
- Explay Neo
- Qmobile i12
- Myphone Ocean ELITE
- Casper via v5 (maybe)
ResurrectionRemix-M Status:
limitations (Not Working / Needs Improvements):
Principal Camera have 8Mpx maximum (must be 13Mpx)
Camera Panaroma and Photo Sphere don't work - See post #3 - Tips & Tricks - 1.Camera with Photo sphere, Panorama and Lens Blur
FM radio don't work
VPN don't work
Backup your IMEI/NVRAM (IMPORTANT):
Backup IMEI/NVRAM from full functional ROM (KK 21 or CM12.1).
The best way (only way for me) to recover IMEI (to get properly GSM) is using "MTK Nvram Tool (Backup & Restore)".
See "[TOOL][AROMA] MTK Nvram Tool (Backup & Restore)" thread here: http://forum.xda-developers.com/showthread.php?t=2594364
You can use others tools to backup & recover your IMEI
Flash Instructions:
Backup your ROM, if you want go back (because next steps clean all your data)
Put the original ROM ResurrectionRemix-M-vx.x.x-YYYYMMDD-mtkroms.com.zip on external SDCard (see post #2 Downloads & Changelogs)
Put the BOOT image FIX ResurrectionRemix-M-vx.x.x-YYYYMMDD_BOOT_V0x_jasousa-mtkroms.com on external SDCard (see post #2 Downloads & Changelogs)
Put the BLOBS FIX ResurrectionRemix-M-vx.x.x-YYYYMMDD_BLOBS_V0x_jasousa-mtkroms.com.zip on external SDCard (see post #2 Downloads & Changelogs)
Flash the new CWM Recovery for MT6582 (https://www.dropbox.com/sh/sgqpo41v...3_RR/PHILZ_recovery_WikoGetawayKK_ok.img?dl=0). If can't flash this recovery (maybe on getaway clones), try flash PhilZ Touch Recovery for Casper Via V5 (https://yadi.sk/d/662_32KQiDL5T). Download original Getaway KK 21 Scatter file from here: https://www.dropbox.com/s/rdga3gbx8x6hx9z/MT6582_Android_scatter.txt?dl=0
Full Wipes (use option "Clean to install a New ROM")
Flash origina ROM
Flash BOOT image FIX
Flash BLOBS FIX
Flash GAPPS 6 pico (from OpenGapps http://opengapps.org/) - You must be flash GAPPS in first installation
Recover your IMEI/NVRAM (with "MTK Nvram Tool" )
Enjoy
Credits:
Original Post: http://www.mtkroms.com/2016/06/stable-resurrection-remix-570-for-mt6582.html
@ferhung - The man behind CM13 for MT6582
@fire855 - Another legend
@hyperion70
www.mtkroms.com
Ajit Guraya - Compiled Resurrection Remix v5.7.1 for MT6582 from source and fixed camera !
Minh Quoc and Karim Gahgah - For video recording fix
Aniruddha Adhikary - For his amazing USSD Fix
Sergey Kochetkoff - For his amazing GPS fix
Team Roger That - Ajit Guraya, Diparth Shah, Pawan Diyal, Ashutosh Dubey, Waseem Maya, Ankit Bhatangar, @Rohan Taneja, Vipul Jha, Pranav Reddy
Resurrection Remix Devs/Team - www.resurrectionremix.com
Required blobs (Really huge thanks) :
nofearnohappy, Varun Chitre (@varun.chitre15), Ariafan, Vald.masti, @fire855, Alex
Wiko getaway PORT/FIX Contributors:
@jasousa
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.4.x
Based On: ResurrectionRemix-M/CyanogenMod
Created: 2016-07-25
Downloads & Changelogs
V 5.7.3-20160807 (07 October 2016), based on "[6.0.1][STABLE] Resurrection Remix 5.7.3 For MT6582 - GPS Working"
ROM: Original ROM ResurrectionRemix-M-v5.7.3-20160807-mt6582-mtkroms.com.zip : http://www.mtkroms.com/2016/08/stable-resurrection-remix-573-mt6582.html (or http://www.hd-usenet-streams.com/do...emix-M-v5.7.3-20160807-mt6582-mtkroms.com.zip or https://mega.nz/#!PZdXzJrb!dTT9YWMWThDTUpRfZ10faK0--cEhy7Sk9vA4XHhyMqk)
PhilZ Touch Recovery for WikoGetaway (changes by @jasousa): https://www.dropbox.com/sh/sgqpo41v...3_RR/PHILZ_recovery_WikoGetawayKK_ok.img?dl=0
Gapps tested: open_gapps-arm-6.0-pico-20160527.zip (Try most recent PICO from http://opengapps.org/).
Ports/Patches/Fixs
BOOT image FIX V01 (and build.prop) - changes and tests by @jasousa - Download: https://www.dropbox.com/s/2sh490ry6...0160807_BOOT_V01_jasousa-mtkroms.com.zip?dl=0
BLOBS FIX V01 (for wiko Getaway) - changes and tests by @jasousa - Download: https://www.dropbox.com/s/qumjz2263...160807_BLOBS_V01_jasousa-mtkroms.com.zip?dl=0
V 5.7.1-20160714 (25 july 2016), based on "[6.0.1][STABLE] Resurrection Remix 5.7.1 For MT6582 - GPS WORKING"
ROM: Original ROM ResurrectionRemix-M-v5.7.1-20160714-mtkroms.com.zip : http://www.mtkroms.com/2016/06/stable-resurrection-remix-570-for-mt6582.html
PhilZ Touch Recovery for WikoGetaway (changes by @jasousa): https://www.dropbox.com/sh/sgqpo41v...3_RR/PHILZ_recovery_WikoGetawayKK_ok.img?dl=0
Gapps tested: open_gapps-arm-6.0-pico-20160527.zip (Try most recent PICO from http://opengapps.org/).
Ports/Patches/Fixs
BOOT image FIX V01 (and build.prop) - changes and tests by @jasousa - Download: https://www.dropbox.com/s/wcv9rgox3...0160714_BOOT_V01_jasousa-mtkroms.com.zip?dl=0
BLOBS FIX V01 (for wiko Getaway) - changes and tests by @jasousa - Download: https://www.dropbox.com/s/49t5pxpam...160714_BLOBS_V01_jasousa-mtkroms.com.zip?dl=0
BLOBS FIX V02 (for wiko Getaway) - changes and tests by @jasousa - Download: https://www.dropbox.com/s/gaphl5b0y...160714_BLOBS_V02_jasousa-mtkroms.com.zip?dl=0
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tips & Tricks
Camera with Photo sphere, Panorama and Lens Blur: use Google Camera (By Google Inc.). Not available in Google Play. Download from http://www.apkmirror.com/apk/google-inc/camera/ (if you trust)
Rom installation error
Got an error when I try to flash the rom:
ApplyParsedPerms: Isetfilecon of /system/lost+found to u: object_r:system_file:s0 failed: Operation not supported on transport endpoint set_metdata_recursive: some changes failed
E:Error
(Status 7)
Installation aborted
Can't able to flash philz recovery through flashify. Also when trying to install ROM status 7 error appears. I am using CWM Recovery
Thank you
Pandicorn said:
Got an error when I try to flash the rom:
ApplyParsedPerms: Isetfilecon of /system/lost+found to u: object_r:system_file:s0 failed: Operation not supported on transport endpoint set_metdata_recursive: some changes failed
E:Error
(Status 7)
Installation aborted
Click to expand...
Click to collapse
Do you downoad ResurrectionRemix-M-v5.7.1-20160714-mtkroms.com.zip file? (direct link: https://drive.google.com/file/d/0B-uqw2dE255KbHpHcjN1d3NWak0/view)
And... do you use PHILZ_recovery for getaway, from post #2?
andy.marsh said:
Can't able to flash philz recovery through flashify. Also when trying to install ROM status 7 error appears. I am using CWM Recovery
Thank you
Click to expand...
Click to collapse
Try with PHILZ_recovery for getaway, from post #2
Maybe your CWM are too old! Use "SP Flash Tool" to install PhilzRecovery.
Still can't able to flash philz recovery with sp flash tool.
My device is qmobile i12 running cm12.1 ROM.
Problem with Wifi
I just tried to watch a movie with the Amazon Video App but every 10 mins or so the wifi just disconnects and the connection is the best possible.
I don't know why, it's a relative fresh installation of this ROM.
andy.marsh said:
Still can't able to flash philz recovery with sp flash tool.
My device is qmobile i12 running cm12.1 ROM.
Click to expand...
Click to collapse
Ok, your phone are'nt Wiko Getaway... but Qmobile i12 is the same... Don't know why you can't install philz recovery posted in #2.
You are using CM12.1 from here: http://forum.xda-developers.com/android/development/port-cyanogenmod-12-1-wiko-getaway-t3242011 ? Try use philz recovery available from there (CWM Recovery or PhilZ Touch Recovery from Casper Via V5)!
aspirat2110 said:
I just tried to watch a movie with the Amazon Video App but every 10 mins or so the wifi just disconnects and the connection is the best possible.
I don't know why, it's a relative fresh installation of this ROM.
Click to expand...
Click to collapse
Do you have a wifi drop every 10 minuts? That's it? This happens only with Amazon Video or happens the same with YouTube?
Dido you backup an recovery NVRAM, from a full functional ROM (KK ou CM12.1)?
regards
jasousa said:
Do you have a wifi drop every 10 minuts? That's it? This happens only with Amazon Video or happens the same with YouTube?
Dido you backup an recovery NVRAM, from a full functional ROM (KK ou CM12.1)?
regards
Click to expand...
Click to collapse
Yes, it only happens with Amazon Video, in Youtube everything is fine.
And I did backup an recovery NVRAM using "MTK Nvram Tool (Backup & Restore)" from a full functional ROM (CM12.1).
Removing the Wifi (and logging back in) or setting a static IP does not help.
After flashing philz recovery from Casper via5 I successfully flashed the ROM. Everything working fine. Thanks a lot jasousa for your help and for your port.
Great work.
God bless you.
andy.marsh said:
After flashing philz recovery from Casper via5 I successfully flashed the ROM. Everything working fine. Thanks a lot jasousa for your help and for your port.
Great work.
God bless you.
Click to expand...
Click to collapse
Thank you. Your feedback are very useful. I add this workaround on post #1.
Sent from my getaway using Tapatalk
When I take panorama from "cardboard camera" or make videos from another camera app the image appears to show pixels. It also happens when I take live photo from "mx camera".
When I connect my device to PC as media device the computer shows "Device is Connected" but it does not show any USB device in "My Computer". I searched on Google about it and it shows that it is a common problem in Marshmallow.
Did you know the fix of this problem?
Thank you.
How would one get a fix for the camera problem? Per example, on the cm 12.1 port you did, what was the science behind the camera fix? Wouldn't it be similar to how it's been dont before?
Sorry if it's a dumb question, I just started messing with ROM's, will probably start studying the code behind them some time soon tho, it seems pretty interesting.
Network Problem
Hello sir thank you for this wonderful rom. I am very thankful to you. But i have problem with this rom that on my sim 2 network is only 3g i am unable to switch to 2g can you help me. Thanks
Aliahmed3129 said:
Hello sir thank you for this wonderful rom. I am very thankful to you. But i have problem with this rom that on my sim 2 network is only 3g i am unable to switch to 2g can you help me. Thanks
Click to expand...
Click to collapse
See BLOBS FIX V02, fom post #2.
More stable GSM and WIFI. Recover GSM after "aeroplane mode".
regards
Hi !
I generated a scatter file using mtkdroidtools and used it to flash the recovery using Smart Phone Flash Tool but I got the error "pmt changed for the rom it must be downloaded". I read too fast a forum that told me to use the auto-format feature from Smart Phone Flash Tool and now I have a nice paperweight. Smart Phone Flash Tool can still connect to the phone, is there a way to unbrick it ?
I found the original rom but it's a big exe. If someone can send me a copy of their phone rom and a scatter file that would be super nice.
I downloaded and ran the latest update from the wiko website and the phone came back to life ! I now have to copy the wifi mac and 2 IMEI written on the cellphone box back to the phone
(I'm not deleting this post in case someone make the same mistake as me)
Have a nice day

[GUIDE] QMobile Z10 and Clones - Lollipop/Marshmallow Development, Roms, Recoveries

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More information about this device:
DIFFERENT VARIANTS AND VERSIONS OF QMobile Z10
There are now five main variants of QMobile Z10 that i am aware of:
QMobile Z10
Micromax Canvas 5 E481
Wiko Fever
Myphone My36
Blu life One X 2016
USEFUL LINKS​
Join Our Whatsapp Group
https://chat.whatsapp.com/invite/Aqc7PYO6lqGEEbDclbBQly
Join Our Facebook Group
https://www.facebook.com/groups/673560846179945/
Lollipop for QMobile Z10 and Clones​
QMobile Z10 32GB Stock Lollipop Rom
https://drive.google.com/drive/folders/0By8Mtxif2hXHZHZqVFZvc0M3MWc
Flashing Instructions for QMobile Z10 32GB Stock Rom over 16GB Variant
Download the above rom and flash without Userdata and Cache.
Then Go to recovery after flashing complete and wipe data and cache then reboot.
Marshmallow for QMobile Z10 and Clones​
NOTE : Only this Marshmallow Rom works perfectly on All Clones with All SENSORS Fixed.
QMobile Z10/Micromax Canvas 5/Blu life One X/Wiko fever/MyPhone My36 Stock Marshmallow Rom
Download Rom from this Link
http://update.wikomobile.com/FEVER_SE_V11.zip
Flashing Instructions for Marshmallow Stock Rom
CAUTION :- ALWAYS BACKUP YOUR WHOLE ROM THROUGH TWRP BEFORE DOING THIS. (ESPACIALLY NVRAM AND NVDATA).
JUST FLASH THIS ROM THROUGH SP FLASH TOOL
STEPS
EXTRACT THE FEVER_V11.ZIP.
RUN FEVER_V11.EXE.
WAIT SOME MOMENTS WHILE EXE FILE EXTRACT THE ROM.
OPEN SP FLASH TOOL.
SELECT SCATTER FILE FROM FEVER_V11/ROM FOLDER (THAT IS EXTRACTED BY FEVER_V11.EXE FILE).
SELECT WHOLE FORMAT FLASH FROM FORMAT TAB IN SP FLASH TOOL.
CLICK ON START AND CONNECT YOUR POWERED OFF DEVICE VIA USB CABLE AND LET IT ERASE YOUR DEVICE.
AFTER GREEN TICK REMOVE YOUR DEVICE AND GO BACK TO DOWNLOAD TAB.
SELECT FORMAT ALL+DOWNLOAD FROM SECTION AND CLICK ON DOWNLOAD.
CONNECT YOUR POWERED OFF DEVICE WITH PC AND LET IT FULLY FLASH.
AFTER GREEN TICK REBOOT YOUR DEVICE.
USEFUL RESOURCES​
QMobile Z10 Bootloader Unlock Guide for Lollipop (MM is already Unlocked)
https://www.incpak.com/tech/qmobile...ng-method-xposed-install-and-custom-recovery/
Drivers
Download Drivers from this Link
[url]https://drive.google.com/drive/folders/0By8Mtxif2hXHTFYxOUJ3ajQxV2s[/URL]
Recoveries :
Download Twrp Recovery for QMobile Z10 and Clones (Lollipop and Marshmallow) from this Link
https://drive.google.com/drive/folders/0By8Mtxif2hXHMDA3aW1HMkNvRUU
CUSTOM ROMS LINK WILL BE PROVIDED THERE SOON TILL NOW JOIN OUR FACEBOOK GROUP
DISCLAIMER
All guides and informations shared on this page are purely based on my own personal experiences.
I cannot guarantee that these informations are 100% correct, there is a chance that some of the info is inaccurate/wrong,
but i can assure you all these guides have been personally tested and proven working from my repeated trials and tests.
Though, i cannot promise that these tricks will work on your device, nor won't brick your device, there is always a risk.
I will NOT be responsible for any loss or damage caused, or alleged to have been caused, directly or indirectly,
by the informations or ideas suggested or referenced, including but not limited to links and files provided on this thread.
Please try at your own risk. Your warranty is now void.
REGARDS​
ASFAND YAR​DEVELOPER, ROM PORTER, MODERATOR OF QMOBILE Z10 AND CLONES.​Feel free to Contact Me​​
Sim & Baseband Fix for Blu life One X 2016, Micromax Canvas 5 E481, Myphone My36, QMobile Z10, Wiko Fever ROMs based on 3.10.65 Kernel :
Sim & Baseband Fix Folder (Google Drive)
Wiko FEVER SE Stock MM v11 ROM Lite !
SP Flash Tool ready.
What's changed :
- Removed Zenly, NewsRepublic, CleanMaster, WikoLauncher, SystemUpdate, Drive, Gmail, Hangouts, Keep, Maps, PlayMusic, PlayVideo, PlayPhotos, MySmartLeftPage and Youtube apps !
- Added Trebuchet & Pixel Launcher apps.
- Special Edition bootanimation for all.
- "ro.secure=0" in boot.img to allow system modifications.
- TWRP recovery 3.0.2 included (the one advised by Asfand Yar)
Link : https://drive.google.com/open?id=0B5O_pmzCrGHfdkt3MWJsMThFVlU
Ready to install custom ROMs based on kernel 3.18.19 !
please upload somewhere else
pakrett-bm said:
Wiko FEVER SE Stock MM v11 ROM Lite !
SP Flash Tool ready.
What's changed :
- Removed Zenly, NewsRepublic, CleanMaster, WikoLauncher, SystemUpdate, Drive, Gmail, Hangouts, Keep, Maps, PlayMusic, PlayVideo, PlayPhotos, MySmartLeftPage and Youtube apps !
- Added Trebuchet & Pixel Launcher apps.
- Special Edition bootanimation for all.
- "ro.secure=0" in boot.img to allow system modifications.
- TWRP recovery 3.0.2 included (the one advised by Asfand Yar)
Link : https://drive.google.com/open?id=0B5O_pmzCrGHfdkt3MWJsMThFVlU
Ready to install custom ROMs based on kernel 3.18.19 !
Click to expand...
Click to collapse
hello,
I was abput to download this attachment.. it downloaded half on my chrome and got stuck after it was about to complete and suddenly stopped with error.. unfortunately it failed to resume and restarted downloading from start..:crying: :crying:
Sir I sent you a pm on Facebook..
Sir the baseband fixes that you uploaded for myPhone my36 isn't working..
Tried it on 3 of these devices but can't make the RIL work..
I also tried to replace the modem.img (mddb folder) but it didn't work..
The fixes I tried for these device are:
-Backup of a working nvram & nvdata in TWRP 3.0.2 and restore it on every flash of a new ROM
-as well as Miracle box too.. Made a backup and restored it on a new ROM.
Those two methods work..
Official Support And Development For L5460 Devices
Wiko Fever 4G - France
Wiko Fever SE - France
My Phone My36 - Philippines
Q Mobile Noir 4G - Pakistan
Micromax Canvas 5 E481 - India
Blu Life One X(2016) - America
Casper Via M1 - Turkey
Telegram:
https://t.me/teammaxmtk
Facebook:
https://www.facebook.com/groups/673560846179945/
above google drive links not working kindly update.
ahmararif said:
above google drive links not working kindly update.
Click to expand...
Click to collapse
Join the group
Harishwarrior said:
Join the group
Click to expand...
Click to collapse
Group links not working
pakrett-bm said:
Sim & Baseband Fix for Blu life One X 2016, Micromax Canvas 5 E481, Myphone My36, QMobile Z10, Wiko Fever ROMs based on 3.10.65 Kernel :
Sim & Baseband Fix Folder (Google Drive)
Click to expand...
Click to collapse
hi there how do i update it. it kept saying aborted
ahmararif said:
Group links not working
Click to expand...
Click to collapse
Search team max in telegram

Categories

Resources