I've been reading threads about prestigio but haven't found particular guide for my unit PMP3670b.
This is really hard to find
I need help for this particular brand/unit PMP3670b and to the person who have knowledge regarding this concern.
Here's what happen to my unit:
-had used my unit till battery has drained, then i charged it, then after charging, i turned it on, i was stuck on 2nd loading screen.
-Contacted prestigio customer support, give this instruction using the sd card and phoenix tool, following the steps, it successful loaded to the main screen, BUT the touch screen was not functioning
-tried my luck using that Faast JB (didn't go well too)
I deeply appreciate any help!
I'm sure that with your help, this could help someone in future.
THANK YOU!
Bump this!!! Please!
Related
hey guys.
so this is my problem....
my friend just bought this phone which it need to be open lined.
then he went to a technician to open his new phone..
after that his starting screen went green with a red square and a blue square.
everything went okay..but days has passed his phone freezes at that screen but i can still access the recovery mode that the technician made.
so i researched one of your forums and i got some suggestions.
done the wipe data and other methods to fix the boot loop/soft brick.
but nothing happens.
i tried to download the official firmware and installed it to flash it back to stock.
but this happens.
it reaches 1/4 of the bar in the downloading process.
how to fix it?
and can you please answer me step by step?
thanks
I do think its sounding like hardware issue.
Please post in Android Q&A, Help & Troubleshooting
so that the right experts may be of help.
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......
Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
I have Prestigio PAP 4500 with Clockwork mod recovery installed. I have installed custom 4.0.4 ROM on it and it worked well for about a year. Yesterday the device started to heat up in upper part(I think wireless module is stored there, as WiFi usage also heated that part). It also started to drain energy very fast - it already was 10% down few minutes after unplugging from overnight charging. I've though some process might be using 100% power so I tried rebooting. It got stuck in android loading screen for over an hour before I decided to remove battery.
I've tried to use clockwork menu to return to factory settings, wipe partitions. Didn't help. I've tried installing stock another rom(PAP 4500T DUO JB 4.2.2 by serg v4.1 Final port Lenovo, "сток"). It also got stuck in Android loading screen. After that I returned to stock rom and it is stuck on eReader Prestigio app ad, which Prestigio shows during loading.
When stuck on that screen upper part of the phone heats up a lot. The battery is not getting warm. I know that after changing rom it might take longer for device to boot, but I have waited for 1h+ each time.
What else can I do to possibly make the device work?
Edit: I've also tried booting without SD card and SIM card.
Hi,
It could be a hardware issue, especially if you did nothing to the device just before. Failing battery perhaps.
But definitely seek other opinions, here...
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thanks. I've asked over there. I've also found Battery related threat in your signature pretty useful. I'm having battery draining issues on my other device, so I hope advice over there will help.
You may need to utilize Google. With less popular devices it can be difficult to find help. Search the WWW also. You may find answers.
Feel free to read the first 4 posts in the battery thread in my signature and post the appropriate screen shots for help. Just specify your device to avoid confusion, since it's a Nexus 5 thread. But we welcome anyone to post. ?
Thank you. Thread closed.
My device is Infinix Zero 16gb.
After flashing a rom I got on another site, the phone failed to come up. Instead, it flashes as if it wants to come up.
When plugged to power, it shows as if it will charge and then goes off. It then tries again and goes off. this loop continues endlessly.
kindly help me with the stock rom so that i can restore my phone using SPflash tool.
Thanks a lot.
Hi, thank you for using XDA Assist. Unfortunately there is very little information on your device on XDA. I would suggest you try asking your question here, http://forum.xda-developers.com/general/help Hopefully someone there knows where to find the firmware.
Good luck and welcome to XDA!
I recently bought a NeuTab N9 Tablet from amazon for about 60 bucks. As soon as it came in the mail I proceeded to tweak it with custom launchers, icon packs, and rooting it. I downloaded PimpMyRom in order to increase the resolution as the tablet is Chinese made, very cheap and generic, which meant the resolution was horrible. After i did that it started slowing down until I decided to reboot it and now it is stuck in the NeuTab logo splash screen. It turns on, flickers once or twice and remains that way. I am able to get it into the stock recovery mode. I tried clearing the cache and resetting it completely. My next step was to flash a custom Rom but i am unable to find any online due to it being an obscure and unknown brand.
Before it got bricked it was running stock 4.2 Jellybean, rooted with Impactor. I'm not sure about the kernel though. Any help is appreciated. If this thread is not in the correct place i apologize, I'm new.
Hi,
Thanks for using XDA Assist Sadly i cant find any information about your device. Please post here Android Q&A, Help & Troubleshooting
Good Luck!