Related
Hi all, yesterday my explorer started lagging and i decided to remove the battery (after not responding for 1min), but when i tried to boot it up again, nothing happened at all not even the screen was lighted.I tried to enter bootloader again nothing.I reinserted the battery and try to enter bootlader a couple of times and finally i got it.I hit reboot but the same again nothing happened.
I had installed jaggyrom 3.2.1 for 4 months and everything was working perfect.
What can i do to get it running up again?
Thanx!
cpgr said:
hi all, yesterday my explorer started lagging and i decided to remove the battery (after not responding for 1min), but when i tried to boot it up again, nothing happened at all not even the screen was lighted.i tried to enter bootloader again nothing.i reinserted the battery and try to enter bootlader a couple of times and finally i got it.i hit reboot but the same again nothing happened.
I had installed jaggyrom 3.2.1 for 4 months and everything was working perfect.
What can i do to get it running up again?
Thanx!
Click to expand...
Click to collapse
have u flashed custom rom?? Try to enter in to recovery then flash any rom..
Elz make hard factory reset( its ma suggetion wait for expert replay)
shree alwaz said:
have u flashed custom rom?? Try to enter in to recovery then flash any rom..
Elz make hard factory reset( its ma suggetion wait for expert replay)
Click to expand...
Click to collapse
No after the first time i got it to enter the bootloader i cant enter again ...i tryied these steps but nothing
1-While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons)
2- While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button.
3-While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time
Are these correct?
cpgr said:
no after the first time i got it to enter the bootloader i cant enter again ...i tryied these steps but nothing
1-while the phone is turned off, press and hold the volume up and volume down buttons together. Then, while holding these, press and release the power button (keep holding the volume buttons)
2- while the phone is turned off, press and hold the volume down button. Then, while holding, press and release the power button.
3-while the phone is off, press and hold down volume up + home + power buttons at the same time
are these correct?
Click to expand...
Click to collapse
did u root ua fone??
shree alwaz said:
did u root ua fone??
Click to expand...
Click to collapse
No i hit reboot
cpgr said:
no i hit reboot
Click to expand...
Click to collapse
use the combinations "press n hold the power button then press n hold volume down" it'll go to bootlooder then select recovery.. Now dont reboot ua fone.. Flash another custom rom..
Hit thanks if helped.
shree alwaz said:
use the combinations "press n hold the power button then press n hold volume down" it'll go to bootlooder then select recovery.. Now dont reboot ua fone.. Flash another custom rom..
Hit thanks if helped.
Click to expand...
Click to collapse
It doesnt do nothing..i removed the battery for a while but nothing..does it matter if the sim is out ? (the sd is in the phone)
cpgr said:
it doesnt do nothing..i removed the battery for a while but nothing..does it matter if the sim is out ? (the sd is in the phone)
Click to expand...
Click to collapse
see.. In 1st post u said some how u entered into recovery n then u did reboot no.. Same way go to recovery then flash some rom..
Btw make sure that u pressed press n hold power button then press n hold volume down button..
shree alwaz said:
see.. In 1st post u said some how u entered into recovery n then u did reboot no.. Same way go to recovery then flash some rom..
Btw make sure that u pressed press n hold power button then press n hold volume down button..
Click to expand...
Click to collapse
Yes, i booted into the bootloader and hit reboot, but since then i cant enter again the bootloader which is why i started this thread..
I press these buttons the right way ..i'e tryied all the combinations with battery re-insert each time but nothing...
Leave battery out for some time (10 min.), then while holding vol- pres power key, DO NOT release vol- it should get in the bootloader, then simply just flash some rom from recovery. The important thing is to leave it 10 minutes first.
Or try something else, while the phone is off, insert the usb in it, with me it's turning on, it's cwm recovery bug, but a good one .
not able to acces recovery mode
i am using htc explorer with jaggy rom 3.after few months when i tried to go in recovery mode my phone reboots.i tried re flashing CWM recovery.it says successful but still i am not able to access??????????
Hey,
Are you able to go to bootloader? If yes don't worry you will have to reflash the recovery. Download twrp or yannous recovery. And flash it,
Sent from my HTC Explorer A310e using xda app-developers app
---------- Post added at 03:21 PM ---------- Previous post was at 03:15 PM ----------
Hey,
Are you able to go to bootloader? If yes don't worry you will have to reflash the recovery. Download twrp or yannous recovery. And flash it,
this post wi'll help you with flashing the recovery
http://forum.xda-developers.com/showthread.php?p=37805882
Get the recovery from this post
http://forum.xda-developers.com/showthread.php?p=37329185
Sent from my HTC Explorer A310e using xda app-developers app
shortyoko said:
Leave battery out for some time (10 min.), then while holding vol- pres power key, DO NOT release vol- it should get in the bootloader, then simply just flash some rom from recovery. The important thing is to leave it 10 minutes first.
Or try something else, while the phone is off, insert the usb in it, with me it's turning on, it's cwm recovery bug, but a good one .
Click to expand...
Click to collapse
i tried it but it doesnt boot...
"Or try something else, while the phone is off, insert the usb in it, with me it's turning on, it's cwm recovery bug, but a good one" what dou you mean?
cpgr said:
Hi all, yesterday my explorer started lagging and i decided to remove the battery (after not responding for 1min), but when i tried to boot it up again, nothing happened at all not even the screen was lighted.I tried to enter bootloader again nothing.I reinserted the battery and try to enter bootlader a couple of times and finally i got it.I hit reboot but the same again nothing happened.
I had installed jaggyrom 3.2.1 for 4 months and everything was working perfect.
What can i do to get it running up again?
Thanx!
Click to expand...
Click to collapse
I'm not sure at what condition is your phone right now. But the most common process I'm telling you is,
Take out your battery. Reinsert.
Hold down power button and volume down button all together until you get your screen emits light. This will take you to the fastboot menu. There select Recovery mode(no matter which recovery you're using). Like if you're usin ClockworkMod Recovery. In the menu, select wipe data/factory reset. Then go to mounts and format option. Mount /cache, /data, /system, /sd-ext(in case you're having a second partition). Remember NOT to mount sd-card. Right from the same menu, format boot, cache, system, data, sd-ext. This time again remember NOT to format sd-card otherwise you'll loose all your data. Now go back to main menu and select advanced option. There select wipe dalvik-cache to not to face low memory problems. Now go back. Select install zip from sd-card. choose zip from sd-card(choose the zip folder of a custom ROM). Install the package. Wait. After completion, reboot or you may have wipe data/factory reset before rebooting. These are the most common steps that works in almost every custom ROM. You can also follow the particular steps (if given) from anywhere you downloaded it. Wait for 2-5 or more minutes at the first boot as it take more time. The process may appears complicated but you'll find it easy when you'll do it.
Hope this thing will sort out your problem. Please hit 'Thanks' if I helped you or atleast do it for humanity that I typed that much for you.
developerindeed said:
I'm not sure at what condition is your phone right now. But the most common process I'm telling you is,
Take out your battery. Reinsert.
Hold down power button and volume down button all together until you get your screen emits light. This will take you to the fastboot menu. There select Recovery mode(no matter which recovery you're using). Like if you're usin ClockworkMod Recovery. In the menu, select wipe data/factory reset. Then go to mounts and format option. Mount /cache, /data, /system, /sd-ext(in case you're having a second partition). Remember NOT to mount sd-card. Right from the same menu, format boot, cache, system, data, sd-ext. This time again remember NOT to format sd-card otherwise you'll loose all your data. Now go back to main menu and select advanced option. There select wipe dalvik-cache to not to face low memory problems. Now go back. Select install zip from sd-card. choose zip from sd-card(choose the zip folder of a custom ROM). Install the package. Wait. After completion, reboot or you may have wipe data/factory reset before rebooting. These are the most common steps that works in almost every custom ROM. You can also follow the particular steps (if given) from anywhere you downloaded it. Wait for 2-5 or more minutes at the first boot as it take more time. The process may appears complicated but you'll find it easy when you'll do it.
Hope this thing will sort out your problem. Please hit 'Thanks' if I helped you or atleast do it for humanity that I typed that much for you.
Click to expand...
Click to collapse
Thanks for the detailed response but the phone wont turn on no matter what combinations of butons i've pressed ...is there any way to make it boot from pc wit usb? otherwise i'll have to take i to the carrier to repair it (if it's woth the money)..
shree alwaz said:
use the combinations "press n hold the power button then press n hold volume down" it'll go to bootlooder then select recovery.. Now dont reboot ua fone.. Flash another custom rom..
Hit thanks if helped.
Click to expand...
Click to collapse
shree alwaz said:
see.. In 1st post u said some how u entered into recovery n then u did reboot no.. Same way go to recovery then flash some rom..
Btw make sure that u pressed press n hold power button then press n hold volume down button..
Click to expand...
Click to collapse
I think he is having key combination problem.
@ S.alwaz
He should press volume down key first and then keeping the vol down key pressed, press the power as well. Now keep pressed both until bootloader appears. Enter recovery and follow the post above for flashing New ROM.
Pressing power first and then volume down key doesn't work. I checked here.
Hit "THANKS". It encourages me.
Does anyone know if the battery is charging even if the screen doesnt show anything (the charging animation) ? I m saying cause it might not boot at all due to a discharged battery...(although the battery was 50% charged when it broke down)
I've tried booting it connected to a usb but still nothing.
cpgr said:
Does anyone know if the battery is charging even if the screen doesnt show anything (the charging animation) ? I m saying cause it might not boot at all due to a discharged battery...(although the battery was 50% charged when it broke down)
I've tried booting it connected to a usb but still nothing.
Click to expand...
Click to collapse
Is you battery ok?
Have you checked it with another phone?
Have you checked another battery on your phone?
What was exactly you doing when you got it off?
Are you rooted?
Hit "THANKS". It encourages me.
Does anyone know if the battery is charging even if the screen doesnt show anything (the charging animation) ? I m saying cause it might not boot at all due to a discharged battery...(although the battery was 50% charged when it broke down)
I've tried booting it connected to a usb but still nothing.
Click to expand...
Click to collapse
My pico takes my to recovery when if the phone is switched off and I connect it to USB or charger only when I have bootloops or my /system, /boot is formatted. You may try it.
Hit 'Thanks' if I helped you
Sent from my HTC Explorer A310e using xda premium
Try this...!!
developerindeed said:
My pico takes my to recovery when if the phone is switched off and I connect it to USB or charger only when I have bootloops or my /system, /boot is formatted. You may try it.
Hit 'Thanks' if I helped you
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Hey , this was a problem for me when my pico went to recovery on connecting charger when phone was switched off..
then i flashed the yannou90's recovery and now it charges with the animation while its off...
not going into recovery when charger is connected...
And @cpgr
try this if it works...
1.)connect your phone to ac charger and leave for 30 minutes
2.)remove the charger and press the key combination as- press the volume down key and keep it pressed...now press the power key and keep both the keys pressed till the screen turns on... then leave the power key first and then the volume down key...
3.)now go to the recovery... [ is it working for you...??]....{ALSO, i recommend yannou90's cwm based recovery, you should try that as well if you already don't have it... }
4.)then wipe data/factory reset , wipe cache and install any Custom rom you like...
....
...
.
After this all.... give a detailed reply on whats not working for you...in the above steps...
i think these should work out great....
best of luck
and click THANKS if i helped...
Hi guys,
I've got a replica of a Galaxy Note 2 5 months ago. It worked alright till today, when I turned it off to replace the battery and it never loaded back.
It's rooted. When I try to enter recovery mode, only the dead droid with the red triangle appears.
I've changed the battery again. Waited for a long time, but it never passes the samsung logo.
Can someone help me with it?
edcolen said:
Hi guys,
I've got a replica of a Galaxy Note 2 5 months ago. It worked alright till today, when I turned it off to replace the battery and it never loaded back.
It's rooted. When I try to enter recovery mode, only the dead droid with the red triangle appears.
I've changed the battery again. Waited for a long time, but it never passes the samsung logo.
Can someone help me with it?
Click to expand...
Click to collapse
HY,this is because of the battery you changed.Now you need to access a small menu that will allow you to solve your problem.That image means you are in recovery and now you will need to press volume up and power and that menu will appear,in it tap clockworkmod update.zip (this will reset your battery stats).Please press thanks if i helped.
footstool toisedt
johnyvlad said:
HY,this is because of the battery you changed.Now you need to access a small menu that will allow you to solve your problem.That image means you are in recovery and now you will need to press volume up and power and that menu will appear,in it tap clockworkmod update.zip (this will reset your battery stats).Please press thanks if i helped.
Click to expand...
Click to collapse
So the problem is caused by the battery change? It never happened before. Anyway, thanks for trying to help. Unfortunately, when i'm on that screen with the red triangle, nothing happens. I've tried lots of combinations of the hard buttons, but no menu appears. Is there an specific order of pressing, or time? Can you give me detailed information on the process?
edcolen said:
So the problem is caused by the battery change? It never happened before. Anyway, thanks for trying to help. Unfortunately, when i'm on that screen with the red triangle, nothing happens. I've tried lots of combinations of the hard buttons, but no menu appears. Is there an specific order of pressing, or time? Can you give me detailed information on the process?
Click to expand...
Click to collapse
HY,try to hold power+v up the same time,till you get the message,if not,i knew that some samsung devices needed to press power,v up or v down(i cant remember) + home,try these and reply back.
johnyvlad said:
HY,try to hold power+v up the same time,till you get the message,if not,i knew that some samsung devices needed to press power,v up or v down(i cant remember) + home,try these and reply back.
Click to expand...
Click to collapse
Well, no success. I turn on the phone holding v up + power. It starts with a "recovery msg" below. Then it enters the screen with the red triangle. On that screen, nothing happens. I did as you told, and tried the following combinations: v up + power, v down + power, v up + home + power, and v down + home + power, for 20 seconds each try, and still, the same screen, no menu, no msg.
I have to mention again that it's a fake galaxy note 2, not a real samsung one.
Any other directions?
edcolen said:
Well, no success. I turn on the phone holding v up + power. It starts with a "recovery msg" below. Then it enters the screen with the red triangle. On that screen, nothing happens. I did as you told, and tried the following combinations: v up + power, v down + power, v up + home + power, and v down + home + power, for 20 seconds each try, and still, the same screen, no menu, no msg.
I have to mention again that it's a fake galaxy note 2, not a real samsung one.
Any other directions?
Click to expand...
Click to collapse
HY,can you reach recovery( TWRP,CWM) ?
johnyvlad said:
HY,can you reach recovery( TWRP,CWM) ?
Click to expand...
Click to collapse
How can I reach it?
I'm kinda new to this thing.
edcolen said:
How can I reach it?
I'm kinda new to this thing.
Click to expand...
Click to collapse
HY,the recovery that you went in was the stock,you said that you are rooted,and i assume you also have a custom recovery,where you flash roms,kernells,etc.I suggest that you should press v up +power+home,and release all 3 when the device model appears(galaxy note 2),if you can reach that make a backup of the device,and after you did it delete cache,dalvik from recovery and restore he backup.
johnyvlad said:
HY,the recovery that you went in was the stock,you said that you are rooted,and i assume you also have a custom recovery,where you flash roms,kernells,etc.I suggest that you should press v up +power+home,and release all 3 when the device model appears(galaxy note 2),if you can reach that make a backup of the device,and after you did it delete cache,dalvik from recovery and restore he backup.
Click to expand...
Click to collapse
Well, I remember using only a windows software to root. "Super One Click" if I'm not mistaken. The process was really simple, and i didn't do anything other then some clicks to root. No rom, kernell, backup or other stuff. It was simple, so that's why I did it.
About the phone, releasing the buttons still takes me to the red triangle screen. Using the v down instead of v up takes me to factory menu. The volume buttons only navigate through the options, but nothing selects them.
edcolen said:
Well, I remember using only a windows software to root. "Super One Click" if I'm not mistaken. The process was really simple, and i didn't do anything other then some clicks to root. No rom, kernell, backup or other stuff. It was simple, so that's why I did it.
About the phone, releasing the buttons still takes me to the red triangle screen. Using the v down instead of v up takes me to factory menu. The volume buttons only navigate through the options, but nothing selects them.
Click to expand...
Click to collapse
IF you dont have any recovery,try to connect to pc and open cmd to do some commands.if it takes you to factory,try go into fastboot,press power on it,and connect to pc,after go in command prompt on pc(type cmd in search) and type this fastboot devices,after that type fastboot erase cache ,if it doesnt recognize this commands,enter the folder that contains everything on you rphone you will see it as samsung galaxy not 2 ,11 go-16(for example ,it shows the storage that is free on your device) and then press shift +right click and open command here,them type what i told you.
johnyvlad said:
IF you dont have any recovery,try to connect to pc and open cmd to do some commands.if it takes you to factory,try go into fastboot,press power on it,and connect to pc,after go in command prompt on pc(type cmd in search) and type this fastboot devices,after that type fastboot erase cache ,if it doesnt recognize this commands,enter the folder that contains everything on you rphone you will see it as samsung galaxy not 2 ,11 go-16(for example ,it shows the storage that is free on your device) and then press shift +right click and open command here,them type what i told you.
Click to expand...
Click to collapse
Well, as I told the post before, nothing selects any of the options on factory mode. Volume just navigates, and that's it. Power or home don't do a thing. I don't have a "fastboot" option on the menu either. I'm starting to give up. Any more ideas?
Just one advice, dont buy fake phone
Sent from my Xperia Miro using xda premium
dear XDA,
kindly need your help in my moto G ,
the software files deleted by mistake & backup files also ,
and i press (vol key + power key) & try :
1- recovery (nothing happened)
2-Factory (nothing happened)
3-normal start (nothing happened)
finally i read all topic to how to root moto g , & i make all the instructions to root it,
but in all time the root freeze when cmd screen writing "Sending : System <2606 KB> "
& stay on this & nothing happened then this ,,
some technical friends told me that , there is problem in boot file ,so any root not complete to the end (is that true ?)
i live in Egypt & i don't have "technical center for Motorola in Egypt" the warranty is in "Saudi Arabia"
no one in egypt can fix it .... plz plz plz help m
Maybe you should start from the beginning and give it one more try.
smsm1990 said:
dear XDA,
kindly need your help in my moto G ,
the software files deleted by mistake & backup files also ,
and i press (vol key + power key) & try :
1- recovery (nothing happened)
2-Factory (nothing happened)
3-normal start (nothing happened)
finally i read all topic to how to root moto g , & i make all the instructions to root it,
but in all time the root freeze when cmd screen writing "Sending : System <2606 KB> "
& stay on this & nothing happened then this ,,
some technical friends told me that , there is problem in boot file ,so any root not complete to the end (is that true ?)
i live in Egypt & i don't have "technical center for Motorola in Egypt" the warranty is in "Saudi Arabia"
no one in egypt can fix it .... plz plz plz help m
Click to expand...
Click to collapse
Yo!
I guess this should work.
First restore your phone to stock firmware. forum.xda-developers.com/showthread.php?t=2542219 (follow the steps there and you would run on stock)
Most probably this will work.
If not then go to recovery (you will run stock recovery here so opening recovery is bit different). To go to recovery first as usual go to fastboot and to recovery. There you will see a lying down android logo with open belly and red caution sign. Then to open recovery, hold volume up and down bottom together for 5 seconds and while holding that hold the power button once and the recovery will open
Now there clear the cache and system data
Now your phone will be OK and working.
Please hit thanks if I helped!
smsm1990 said:
and i press (vol key + power key) & try :
1- recovery (nothing happened)
2-Factory (nothing happened)
3-normal start (nothing happened)
Click to expand...
Click to collapse
I think you pressed the power instead of volume up key when choosing these options.
vhngu930 said:
I think you pressed the power instead of volume up key when choosing these options.
Click to expand...
Click to collapse
Indeed , don't forget that in the default recovery VOLUME UP = ENTER and VOLUME DOWN = SCROLL .
If everything else fails , restore your stock firmware and try to root the phone again .
Best of luck !
Hir0xM said:
Indeed , don't forget that in the default recovery
Click to expand...
Click to collapse
I think you mean bootloader
vhngu930 said:
I think you pressed the power instead of volume up key when choosing these options.
Click to expand...
Click to collapse
vhngu930 said:
I think you mean bootloader
Click to expand...
Click to collapse
Indeed , my bad
I unable to unlocked bootloader its says "your device is not eligable for unlocking bootloader" what to do??
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.
Is that file you posted a newer updated rom?(4.4.2 or better ?) And what exactly does this flash "fix" ?
xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
Click to expand...
Click to collapse
ssjgotengt said:
Is that file you posted a newer updated rom?(4.4.2 or better ?) And what exactly does this flash "fix" ?
Click to expand...
Click to collapse
sorry for the late responce, but the fix was for a virus, a very toublesome one by-the-way, that seemed to stay on the device even from a system reset, or from the recovery even after a wipe of cache/data/dalvic and what not... had been looking for the rom and couldnt find anywhere, had contacted the irulu site and we had multiple back and forth thru email... it was only however thru trial and error i found the correct rom which i posted for benefit of anyone who needs it.
also the fix was for an in-law but i believe it it was 4.4.2...
expro x1
Can you tell me tge serial number of your device? I've been looking for the firmware but none are working
expro x1
xL2e said:
sorry for the late responce, but the fix was for a virus, a very toublesome one by-the-way, that seemed to stay on the device even from a system reset, or from the recovery even after a wipe of cache/data/dalvic and what not... had been looking for the rom and couldnt find anywhere, had contacted the irulu site and we had multiple back and forth thru email... it was only however thru trial and error i found the correct rom which i posted for benefit of anyone who needs it.
also the fix was for an in-law but i believe it it was 4.4.2...
Click to expand...
Click to collapse
can you update the link?
kahrloz said:
Can you tell me tge serial number of your device? I've been looking for the firmware but none are working
Click to expand...
Click to collapse
Please don't ask for serial numbers here. :good:
My Irulu tablet does not have volume buttons.
Only power & esc buttons.
How do I get it into recovery mode then?
Hi all, I downloaded the firmware from Irulu for the 8-inch Expand x1s version, but I can not install it in Sideload ADB mode can you help me?
***fixed for irulu Inc through Android reset method
While it is on hold the power button and hit power off and when prompted to have it boot in quick mode hit yes. Turn on and it power button. And when asked to power off or reboot hold the power off link and agree to have safe mode activated. (Even if it was already activated the process of the irulu is quite similar to down syndrome so must repeat for the second time). Once off hold power and volume up till it brings recovery mode into display.
Tinman_Haus said:
While it is on hold the power button and hit power off and when prompted to have it boot in quick mode hit yes. Turn on and it power button. And when asked to power off or reboot hold the power off link and agree to have safe mode activated. (Even if it was already activated the process of the irulu is quite similar to down syndrome so must repeat for the second time). Once off hold power and volume up till it brings recovery mode into display.
Click to expand...
Click to collapse
Good morning, is the advice for my problem? because with the translation I can not understand. Thanks anyway
---------- Post added at 05:57 AM ---------- Previous post was at 05:44 AM ----------
xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.
Click to expand...
Click to collapse
Hello, my irulu is locked in a recovery mode for a year and can not install the original firmware. Can you help me with any rom so I can reactivate my tablet? . Thank you.
Jascha2016 said:
Good morning, is the advice for my problem? because with the translation I can not understand. Thanks anyway
---------- Post added at 05:57 AM ---------- Previous post was at 05:44 AM ----------
Hello, my irulu is locked in a recovery mode for a year and can not install the original firmware. Can you help me with any rom so I can reactivate my tablet? . Thank you.
Click to expand...
Click to collapse
Hey I couldn't find this firmware after you asked but I have since found it in an old hard drive so I am sharing it with you, hope it helps with restoring your tablet...
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk
kahrloz said:
can you update the link?
Click to expand...
Click to collapse
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk
xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.
Click to expand...
Click to collapse
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk
irulu tablet expro x1 x9 pro firmware
am looking the irulu tablet expro x1 x9 pro firmware
Hi guys, i need your help please. I'm in latest stock rom version ==> WW_18.0610.2106.156 and yesterday, i flashed omnirom (omni-11-20211010-zenfone6-MICROG.zip) using official TWRP and unfortunately i've bricked my phone
So, when I press the volume key+ and the power button simultaneously, I no longer have access to the fastboot menu. It gives me a black screen with red led when the phone is plugged into a power source. When I keep pressing the power button to turn on the phone, the screen freezes on "powered by android" as you can see from the screenshots. Anyway, i downloaded the firmware https://androidfilehost.com/?fid=1395089523397969054
and extract its content to a folder. Then i executed the file called update_image_EDL.bat script to recreate the partitions on my device and finally flashall_AFT.cmd but nothing is happening. It's written in the PC <waiting for any devices>.
I don't know what to do. Please help me thank you in advance and sorry for my bad english.
Mounib BOULAABI said:
Hi guys, i need your help please. I'm in latest stock rom version ==> WW_18.0610.2106.156 and yesterday, i flashed omnirom (omni-11-20211010-zenfone6-MICROG.zip) using official TWRP and unfortunately i've bricked my phone
So, when I press the volume key+ and the power button simultaneously, I no longer have access to the fastboot menu. It gives me a black screen with red led when the phone is plugged into a power source. When I keep pressing the power button to turn on the phone, the screen freezes on "powered by android" as you can see from the screenshots. Anyway, i downloaded the firmware https://androidfilehost.com/?fid=1395089523397969054
and extract its content to a folder. Then i executed the file called update_image_EDL.bat script to recreate the partitions on my device and finally flashall_AFT.cmd but nothing is happening. It's written in the PC <waiting for any devices>.
I don't know what to do. Please help me thank you in advance and sorry for my bad english.
Click to expand...
Click to collapse
U have to install adb and fastboot drivers
Your phone is not detected by the p install Android adb and fastboot drivers
Mounib BOULAABI said:
Hi guys, i need your help please. I'm in latest stock rom version ==> WW_18.0610.2106.156 and yesterday, i flashed omnirom (omni-11-20211010-zenfone6-MICROG.zip) using official TWRP and unfortunately i've bricked my phone
So, when I press the volume key+ and the power button simultaneously, I no longer have access to the fastboot menu. It gives me a black screen with red led when the phone is plugged into a power source. When I keep pressing the power button to turn on the phone, the screen freezes on "powered by android" as you can see from the screenshots. Anyway, i downloaded the firmware https://androidfilehost.com/?fid=1395089523397969054
and extract its content to a folder. Then i executed the file called update_image_EDL.bat script to recreate the partitions on my device and finally flashall_AFT.cmd but nothing is happening. It's written in the PC <waiting for any devices>.
I don't know what to do. Please help me thank you in advance and sorry for my bad english.
Click to expand...
Click to collapse
I had the same problem, i fixed it . You can ping me on telegram
Id :- @Aroy52