Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo.
Device-specific source code for the Samsung Galaxy S II Plus:
https://github.com/ghsr/android_device_samsung_galaxys2plus-common
https://github.com/ghsr/android_device_samsung_i9105p
https://github.com/ghsr/proprietary_vendor_samsung_galaxys2plus-common
https://github.com/ghsr/android_kernel_samsung_galaxys2plus-common
Compatibilitiy patches:
https://github.com/doriandiaconu/android_build-tools_galaxys2plus-common
Do not submit bugs on CyanogenMod issue tracker
Downloads
ROM: https://basketbuild.com/devs/DorianDiaconu/CM11
GApps: http://wiki.cyanogenmod.org/w/Gapps
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera (photo & video)
Video playback
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Issues
Known device specific Issues
screenrecord does not work
Stock browser does not use hardware acceleration (Please use Firefox, Google Chrome, Dolphin, etc)
Known Sources Issues
Bluetooth Headset not working
FM Radio does not work (you can use SpiritFM, but I'm not providing support for any problem)
Does not work on 4.1 stock ROM's bootloader, please upgrade to 4.2 before flashing
Installation
Make a backup!
Make sure you are rooted
Be sure that you have the 4.2.2 bootloader
Install a custom recovery
Install the ROM using your custom recovery
Optionally install the Google Apps Addon
Wipe data if coming from stock
Don't submit bugs to me, if you didn't do a full wipe and you are coming from another ROM
For GT-I9105 flash NFC destroyer by @GHsR
FAQ
Can you include Feature X into your ROM?
No. This ROM will have CyanogenMod's feature set.
Can you include S-Note/S-Planner/MultiWindow/Insert Samsung App Here?
No. This is an AOSP ROM and cannot have TouchWiz applications.
Can you include call recording?
No. CyanogenMod does not include call recording to avoid potential legal issues.
Can you add Feature X to the stock ROM?
No. I don't work on stock ROMs.
What kernel does this ROM use?
A slightly modified version of the stock kernel, the source code is linked above.
I've heard that Broadcom doesn't release source, how can you make this ROM?
Contrary to the popular belief, userspace driver source code is not always required to make an AOSP-based ROM as long as the proprietary binaries shipped with the device does not modify the API too heavily (or is from a very different version of Android). Instead of modifying the source code of the drivers, the Android source code was adapted to be able to use the proprietary binaries.
Can I use your ROM as a base?
http://source.android.com/source/licenses.html
Most of Android/CyanogenMod is licensed under the Apache License with other small parts licensed under other open-source licenses. Which means that you may modify and redistribute without asking for permission as long as the proper credits is given and it is not misappropriated as being the official CyanogenMod. (In other words, you must say that it is based on pawitp's unofficial CyanogenMod, but is not related to CyanogenMod in any other way.)
Reporting bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your:
- Phone model (I9105 or I9105P):
- Radio (baseband):
- CM version:
- CM Download URL:
- GApps version:
Did you:
- Wipe:
- Restore with titanium backup:
- Reboot after having the issue:
Are you using:
- A task killer:
- A non-stock kernel:
- CMSettings/Performance settings (other than stock):
- Other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Screenshots
F2FS
From CM 11.0 M10, it is supposed to be compatible with LuK1337 's EXT to F2FS ROM converter:
http://forum.xda-developers.com/galaxy-s2-plus/development/linux-ext-to-f2fs-rom-converter-t2840303
Thanks
- The CyanogenMod team for providing a great ROM. Without all the compatibility work which went into it, this ROM would've been much harder to make
- @pawitp - for patches
- @CoolDevelopment, @LuK1337, @GHsR, @andixlm, @beastaki23 and other I9105/P and I9082 devs
If you like it, use it and don't forget to press the "Thanks" button or send me a beer via PayPal.
XDA:DevDB Information
[M12] Cyanogenmod 11.0, ROM for the Samsung Galaxy S II Plus
Contributors
doriandiaconu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.2.2
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-26
Created 2015-05-20
Last Updated 2016-07-16
New version online. Which would probably be the last version of CM11. It isn't really getting many updates.
Changelog:
- New device tree (with CM12 changes).
- Nebula kernel
- Optimized with ArchiDroid (Thanks to @JustArchi)
- ROM and kernel optimized with Linaro.
Thanks @GHsR for the help and @haky 86 for help in some technical problems.
This ROM is now as speedy as it could be. Both i9105/p are uploaded.
Gonna resurrect PAC/AOSPA KK now.
is the stock browser hardware accelerated ? or it remains an issue even after changing the tree ?
doriandiaconu said:
New version online. Which would probably be the last version of CM11. It isn't really getting many updates.
Changelog:
- New device tree (with CM12 changes).
- Nebula kernel
- Optimized with ArchiDroid (Thanks to @JustArchi)
- ROM and kernel optimized with Linaro.
Thanks @GHsR for the help and @haky 86 for help in some technical problems.
This ROM is now as speedy as it could be. Both i9105/p are uploaded.
Gonna resurrect PAC/AOSPA KK now.
Click to expand...
Click to collapse
Vibration is not working..atleast for me..great rom tho
DenisRonaldo798 said:
Vibration is not working..atleast for me..great rom tho
Click to expand...
Click to collapse
It's really because of the device tree. It isn't compatible with nebula kernel.
bloodofJesus said:
I saw a patch for vibration fix for nebula on github, does that not work ?
Click to expand...
Click to collapse
The device tree itself doesn't include the VibrationHW.java and I forgot to add it.
bloodofJesus said:
Wow, I'm utterly impressed, the speed is impressive, too bad archidroids optimizations don't work on lollipop , is it just me or lollipop is too heavy for the s2 plus ?
Click to expand...
Click to collapse
They should be working on LP. I'm getting some assembler errors at the moment. Hope to sort them out fast.
good job
doriandiaconu said:
The device tree itself doesn't include the VibrationHW.java and I forgot to add it.
Click to expand...
Click to collapse
hello @doriandiaconu,
you think that you can rewrite the ROM with support for vibration? because I think that this ROM is the best for our samsung s2 plus.
I believe that the best ROM in performance for this phone is the Cyanogenmod based on kitkat that is faster and more stable for constant use over time
I have tried both the ROM [5.1.1] Resurrection Remix® Lollipop v5.4.5 and the ROM [5.1.1] CandyRoms Candy5 Lollipop for GT-i9105 / P V2.5.1
It' true that these ROMs (lollipop) are nice with lots of features, but after a while of using, the phone is slow especially the dialer and often become almost unusable until the next reboot
---------- Post added at 05:01 PM ---------- Previous post was at 04:30 PM ----------
bloodofJesus said:
Wow, I'm utterly impressed, the speed is impressive, too bad archidroids optimizations don't work on lollipop , is it just me or lollipop is too heavy for the s2 plus ?
Click to expand...
Click to collapse
yes, I think like you that lollipop is too heavy for our phone...
problem with images
hello, after I have installed this version of ROM with the pico Gapps in the links below [new edit], many icons and images in google playstore are corrupted? any of you have this problem?
thanks
[edit]
I understood the problem: is't the new version of google playstore
In fact, taking a file with an older version of gapps the problem does not occur
[new edit]
sorry, but I committed an error when writing above. the gapps that I used the first time are the 5.1.x on the link http://forum.xda-developers.com/paranoid-android/general/5-1-x-5-0-x-4-4-x-pa-gapps-mirror-t3069879
I used the PICO version with an updated version of play store & play services
while those of the first page of this treat work great (but there are not the PICO version)
cappoccia said:
hello @doriandiaconu,
you think that you can rewrite the ROM with support for vibration? because I think that this ROM is the best for our samsung s2 plus.
I believe that the best ROM in performance for this phone is the Cyanogenmod based on kitkat that is faster and more stable for constant use over time
I have tried both the ROM [5.1.1] Resurrection Remix® Lollipop v5.4.5 and the ROM [5.1.1] CandyRoms Candy5 Lollipop for GT-i9105 / P V2.5.1
It' true that these ROMs (lollipop) are nice with lots of features, but after a while of using, the phone is slow especially the dialer and often become almost unusable until the next reboot
---------- Post added at 05:01 PM ---------- Previous post was at 04:30 PM ----------
yes, I think like you that lollipop is too heavy for our phone...
Click to expand...
Click to collapse
I will try to do it.
If I am not wrong vibration is work on this tree
https://github.com/hak86/android_device_samsung_s2vep/blob/cm-11.0/
at last IF i have port the new kernel successfully I will try to update kitkat version too xD
haky 86 said:
If I am not wrong vibration is work on this tree
https://github.com/hak86/android_device_samsung_s2vep/blob/cm-11.0/
at last IF i have port the new kernel successfully I will try to update kitkat version too xD
Click to expand...
Click to collapse
But it wasn't on the one ghsr did. I'm not using vibration so I didn't really intend to keep it XD
file gapps
bloodofJesus said:
I have this problem as well, which gapps did you use to fix this problem ? could you link it please ? thanks. @bloodofJesus
hello, these are oK: https://www.androidfilehost.com/?fid=23311191640114013
note that you need to re-flash the rom with the new gapps file
Click to expand...
Click to collapse
Cyanogenmod 11 CM12 - BEST SCORE for s2 plus
This ROM gives the best ANTUTU BENCHMARK score for this device: 14150
with lollipop 5.1.1 the score was from 12800 to 13100
This rom is confirmed as the fastest for this phone! if there was the vibration and adaptive brightness would be the best!
cappoccia said:
This ROM gives the best ANTUTU BENCHMARK score for this device: 14150
with lollipop 5.1.1 the score was from 12800 to 13100
This rom is confirmed as the fastest for this phone! if there was the vibration and adaptive brightness would be the best!
Click to expand...
Click to collapse
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
True, I want to install this rom, but without vibration I can't do anything
help for Adaptive brightness
TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
the problem is that when I check it, it simply doesn't work....do you have an idea? you think it could be the language settings of the device?
I will try to change to a different language...
[edit]
with english language, same result: doesn't work.
how did you se it's working? have you tried to set the backlight to low level and then see how it's light automatically?
TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
I will fix vibration and adaptive brightness. Just give me some time. I got a few exams in this period. I'm also trying to fix the LP builds.
cappoccia said:
the problem is that when I check it, it simply doesn't work....do you have an idea? you think it could be the language settings of the device?
I will try to change to a different language...
[edit]
with english language, same result: doesn't work.
how did you se it's working? have you tried to set the backlight to low level and then see how it's light automatically?
Click to expand...
Click to collapse
Ye, I've set brightness to the lowest possible, and was slowly making it brighter and brighter, and - as my settings app is white with dark-green header - the header turned completely black, and it simply worked XD or maybe it's just me understanding the ,,adaptive brightness'' wrong, sorry if so.
TyMoOteUuSz said:
Ye, I've set brightness to the lowest possible, and was slowly making it brighter and brighter, and - as my settings app is white with dark-green header - the header turned completely black, and it simply worked XD or maybe it's just me understanding the ,,adaptive brightness'' wrong, sorry if so.
Click to expand...
Click to collapse
unfortunately when I enable the adaptive backlight the screen remains dark and does not light as in other ROM I tried....
---------- Post added at 03:04 PM ---------- Previous post was at 03:02 PM ----------
doriandiaconu said:
I will fix vibration and adaptive brightness. Just give me some time. I got a few exams in this period. I'm also trying to fix the LP builds.
Click to expand...
Click to collapse
Many Thanks! I will wait for your new versione. good luck for your exams
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my CyanogenMod 12.1 (Android 5.1.1) Rom for the Wiko DarkMoon (Mediatek MT6582 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Source Build, so it will NOT be supported by the CyanogenMod Team
It also work without any issues on the clones:
- Micromax a200 Canvas turbo Mini
- BLU Life Play S
- Myphone Agua Iceberg Slim
- QMobile Noir A910
CyanogenMod 12.1 Status:
Working:
- RIL: Telephony (Calls / etc) (2G and 3G) (In Both SIMs)
- ART
- Sensors
- LED's
- Rear Camera ( pictures )
- Front Camera ( pictures )
- FlashLight
- Sound
- Bluetooth
- Wifi
- Microphone (For Calls and in some apps)
- Data connection
- CyanogenMod related features (Theme Manager, etc ... )
- GPS and aGPS
Not Working / Needs Improvements :
- Camcorder ( WorkAround: use 3rd party video recording apps from Play Store)
- USSD codes. only works in some Providers
Single / Dual SIM Behavior :
On Dual-SIM (when using both SIM slots) :
3G Will be forced to Slot 2 (Depending on your SIM Provider)
Data connection will only properly work on Slot 2 (Depending on your SIM Provider)
On Single-SIM (when using only one SIM slot) :
You can toggle between 2G / 3G just fine
Data connection will work just fine
Also when in Single-SIM and to avoid bugs with Data connection
Change this line in build.prop (/system):
Code:
persist.radio.multisim.config=dsds
to
Code:
[B]#[/B]persist.radio.multisim.config=dsds
Flash Instructions:
Backup, Backup, Backup ...
You need to be on the Unofficial KitKat Base (due to the new KK partitions)
Put the cm-12.1-xxxxxxxx-UNOFFICIAL-darkmoon.zip on external SDCard
Flash the new CWM Recovery 6.0.5.1 (This is no touch recovery), you can flash with flashify app, or by SPFlashTools.
Full Wipes
Flash Rom
Flash minimal GAPPS 5.1
Enjoy
GPL Compliance:
Kernel: https://github.com/dragonpt/Kernel_3.4.67_KK_Wiko_DarkMoon
Device: https://github.com/dragonpt/android_device_wiko_darkmoon
Vendor : https://github.com/dragonpt/android_vendor_wiko_darkmoon
Credits:
CyanogenMod Team
OMNI Team (specially XpLoDWilD and Dr-Shadow)
chrmhoffmann
fire855
ariafan
axet
Santhosh M
moonrotation--> Al3XKOoL
DerTeufel1980
XDA:DevDB Information
[ROM][UNOFFICIAL] CyanogenMod 12.1 [5.1.1] Wiko DarkMoon [MT6582], ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Newest CWM
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2.0
Beta Release Date: 2015-06-29
Created 2015-06-27
Last Updated 2015-08-22
Changelogs
Beta 5 (August 10 2015)
FIX: GPS and aGPS ( @DerTeufel1980 , thanks for the help)
Minor issues adressed
Beta 4 (July 17 2015)
Sync with CM
Fix: Camera problems on latest 5.1.1 source
Fix: Calls problems on latest 5.1.1 source
Small other tweeks
Beta 3 (July 12 2015)
Sync with CM (and fixed the sources)
Now on the latest Google's android LMY48G (now at 5.1.1_r6)
(Changelog is Huge, please check CyanogenMod full changelog on their site or gerrit )
Removed some pre-compiled vendor .blobs, we don't need them now.
Fix: Some telephony issues
Beta 2 (July 05 2015)
(Built on 29 June 2015)
Sync With CM (29/June)
FIX: WiFi (New LP WPA_supplicant, etc)
ADD: External SDCard RW Permissions
Other small issues addressed
Beta 1 (June 27 2015)
First Open release
Sync with Latest CM source
Beta 0.01 (June 22 2015)
Open Beta for testers
Alpha Builds (xxx -> June 21 2015)
Internal Builds
Downloads:
Are on XDA dev-DB (The "Download" TAB)
If you are in TapaTalk, or can't see the page Tabs press here:
http://forum.xda-developers.com/devdb/project/?id=10541#downloads
Alternative Downloads:
New TWRP For CyanogenMod / Lollipop
--> Flash from your current recovery
https://www.androidfilehost.com/?fid=24052804347767497
5.1 Gapps
https://www.androidfilehost.com/?fid=24052804347772344
.
F.A.Q
Q: Is this Rom rooted?
A: Yes, this is CyanogenMod
--> Enable Dev. Options by tapping 7 times on Build Number > Enable root there
Q: I can't flash this Rom on recovery, why?
A: You need to update your recovery in order to flash this CM Builds , check under the Download Section
Q: Is this ROM Multi-Language ?
A: Yes ...
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: CyanogenMod haves this features in-built under Settings> Performance
--> there you can change Governors / IO's , etc
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where's the FM Radio?
A: CM doesn't support FM Radio, for MTK's , im working on it
Q: I cant Sync with Google (contacts, etc), why?
A: Just make sure, gps is OFF and reboot, it'll work now
Q: Is Xposed Framework and his modules compatible with CM 12.1 ?
A: Xposed for Lollipop 5.1 is still W.I.P, test it yourself, with precaution...
Q: Can i revert to stock ROM after ?
A: Sure you can! You just need to flash the Stock Wiko JellyBean 4.2 ROM via SPFlashtools. Or just download the wiko software tool from their site.
Q: Can i revert to your Unofficial KitKat ROM after ?
A: Sure, just revert to the older recovery, and flash the unofficial kitkat Rom
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s) :fingers-crossed:
.
Thank you so much for this!!!! So if i use a third camera app from the playstore, video recording will work?
claudiuh said:
Thank you so much for this!!!! So if i use a third camera app from the playstore, video recording will work?
Click to expand...
Click to collapse
Yes some will work just fine, i use this one:
https://play.google.com/store/apps/details?id=com.androidillusion.videocamillusion&hl=en
cheers
Excelent work, thank you
Doesn't memorise my wifi network. Can anyone confirm?
Also, how do we move apps to sd card?
Downloading it now. Okay wait so if i want to flash back to kk i need to be on stock wiko first? U mean i cant just flash unofficial kk from cm12?
Great Work
You are a beast man , keep working
awesome work bro !!!!
Good work !!
Good custom rom it's working but it's having problems with sync google account. It's maybe because the Gapps?. And the battery is quickly discharge
I'm sorry if my english is incorrect because I don't speak english fluent
Thanks for your work :highfive:
angelobap96 said:
Good custom rom it's working but it's having problems with sync google account. It's maybe because the Gapps?. And the battery is quickly discharge
I'm sorry if my english is incorrect because I don't speak english fluent
Thanks for your work :highfive:
Click to expand...
Click to collapse
hi
from the FAQ:
Q: I cant Sync with Google (contacts, etc), why?
A: Just make sure, gps is OFF and reboot, it'll work now
cheers
Both Sim Blocked
The rom is perfect I love it, and is soo smooth. But I got problemwith the sim it blocked Both and I don´t Know how to fix that.
superdragonpt, this is the rom that you will be remembered for. Excellent job. This is not a port, its a creation! You just made a kernel out of scratch just so you can bring lollipop to our devices so I thank you for that. While we both know that the rom is far from perfect, i hope you will continue to bring us updates and bug fixes. Wish you all the best superdragonpt!
@snapdragonpt i am again facing camera bug....front camera blackish at edges.....quality is not upto mark.....though i didnt face that dual sim problem ...i can easily use 3g on slot 1.....viasuals are good.....performance is good.....but no contact display option for sim....and everytime sim blocked,....minor bugs u can fix....thas all i found ..hope it will help you for a stable version
Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Plus, everything developed for this device is all WIP, since we never ever got any source .
- The KitKat Rom is unofficial, and made from scratch ...
- The CyanogenMod 11 & 12.1 also.
There's minor issues (since my unofficial KK) that are related with my kernel (cameras needing manual compensation, etc )
Regarding cameras: that's the best i was abled to do without any kind of sourcecode, i had to write our own drivers...
If you manually adjust the exposure / whites, it takes good pictures, but don't expect it to be like in the (very old) JellyBean 4.2.2 (stock) Rom.
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers
superdragonpt said:
Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers
Click to expand...
Click to collapse
We understand superdragonpt and we are willing to wait, i just hope you will not desert this project until atleast most of the bugs are fixed. I can list you all the bugs that i have found if it will make your job easier.
BUGS:
1. Yes, the blueish tint. While it is adjustable on KK and CM11, CM12.1 tells it different, we dont have the white balance option on our default camera app. Im certain using third party or post editing the image will fix it though.
2. No move apps to SD. This is common on almost ALL lollipop roms so no surprises there, we just link our apps with Link2SD.
3. We have some dangerous bug concerning brightness. Turn Adaptive Display on (auto brightness) and then manually turn down the brighness and u get a pitch black screen. Dangerous if you dont know the position of the slider.
Alternatively if u turn Adaptive Display off and turn Battery Saver on, you will get a pitch black screen if you turn the brightness to its minimum.
4. LED notifications, yes they light up but they stay lit. If u get a low battery youre supposed to get a blinking red, but with this bug u get a continuous red light. Same with texts but with an endless green. Im sure third party apps can do something regarding this.
5. Heads up notifications does not work with every app. Turning it off did not fix it either. The only heads up notif i get is from facebook and calls, but it wont give u heads up for text messages or games.
6. There is a youtube bug. This one im not sure if its an isolated problem. If you are watching videos sometimes it will stop and refuse to play unless you click on a new video and click back to the one you were watching.
Other than that, this rom is great! It is not as stable as your KK 4.4.2 which is my personal favorite I must say. But bringing lollipop to the table is good enough already so kudos to you. Thank you superdragonpt.
halogenn said:
We understand superdragonpt and we are willing to wait, i just hope you will not desert this project until atleast most of the bugs are fixed. I can list you all the bugs that i have found if it will make your job easier.
BUGS:
1. Yes, the blueish tint. While it is adjustable on KK and CM11, CM12.1 tells it different, we dont have the white balance option on our default camera app. Im certain using third party or post editing the image will fix it though.
2. No move apps to SD. This is common on almost ALL lollipop roms so no surprises there, we just link our apps with Link2SD.
3. We have some dangerous bug concerning brightness. Turn Adaptive Display on (auto brightness) and then manually turn down the brighness and u get a pitch black screen. Dangerous if you dont know the position of the slider.
Alternatively if u turn Adaptive Display off and turn Battery Saver on, you will get a pitch black screen if you turn the brightness to its minimum.
4. LED notifications, yes they light up but they stay lit. If u get a low battery youre supposed to get a blinking red, but with this bug u get a continuous red light. Same with texts but with an endless green. Im sure third party apps can do something regarding this.
5. Heads up notifications does not work with every app. Turning it off did not fix it either. The only heads up notif i get is from facebook and calls, but it wont give u heads up for text messages or games.
6. There is a youtube bug. This one im not sure if its an isolated problem. If you are watching videos sometimes it will stop and refuse to play unless you click on a new video and click back to the one you were watching.
Other than that, this rom is great! It is not as stable as your KK 4.4.2 which is my personal favorite I must say. But bringing lollipop to the table is good enough already so kudos to you. Thank you superdragonpt.
Click to expand...
Click to collapse
Hi
~
Thanks for the bug list, it really helps, since im wasting most of my time compiling and check issues.
1: The new CyanogenMod 12.1 camera lacks some settings, so, yes, you can't adjust camera settings just like in KK.
--> Workaround, use another camera app from the Play Store
--> Same goes for recording videos ( there's an Play store link on first page for a camera app, that works great for recording videos ...
2: There's nothing i can do regarding this
3: Adaptive Display : Yes it needs some re-calibration
4: Led: It works but doesn't blink (minor bug )
5: Seems to be an problem with CM release
6: Should be fixed on next release
Thanks for the feedback
cheers
superdragonpt said:
Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Plus, everything developed for this device is all WIP, since we never ever got any source .
- The KitKat Rom is unofficial, and made from scratch ...
- The CyanogenMod 11 & 12.1 also.
There's minor issues (since my unofficial KK) that are related with my kernel (cameras needing manual compensation, etc )
Regarding cameras: that's the best i was abled to do without any kind of sourcecode, i had to write our own drivers...
If you manually adjust the exposure / whites, it takes good pictures, but don't expect it to be like in the (very old) JellyBean 4.2.2 (stock) Rom.
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers
Click to expand...
Click to collapse
so there is no way to fix camera you said only on some devices some are working ? you tried to replace modules from jb ? should i try ? but i cant coz i have this device as my daily driver........ i know whatever u r doing is just great n i appreciate you...in fact we all do !
As i know micromax a120 have same specs even unite 2 have same chipset, can you try using unite 2 lollipop module ? i think someone should try if you have this device as a spare device !
Sent from my Micromax A200 using XDA Free mobile app
Is there any way to move apps to external sd? I always get an error with link2sd, and my internal memory is already full
Akash sky said:
so there is no way to fix camera you said only on some devices some are working ? you tried to replace modules from jb ? should i try ? but i cant coz i have this device as my daily driver........ i know whatever u r doing is just great n i appreciate you...in fact we all do !
As i know micromax a120 have same specs even unite 2 have same chipset, can you try using unite 2 lollipop module ? i think someone should try if you have this device as a spare device !
Sent from my Micromax A200 using XDA Free mobile app
Click to expand...
Click to collapse
It wont work because micromax a120 has a different kernel despite having identical specs. Flashing it would result in a brick.
Goncalo29 said:
Is there any way to move apps to external sd? I always get an error with link2sd, and my internal memory is already full
Click to expand...
Click to collapse
Yes moving apps to sd doesnt work because our "external sd" is just emulated from internal sd. Which means our external and internal is just one. I dont know, i think thats just how lollipop works. Link2sd does work fine for me. Im using the free one from play store because if you try to use a cracked link2sd pro ull have a "Package invalid" error.
AICP is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial Build of AICP 11 MM for Jiayu S3 Plus ( not for the normal S3 , that packs the 6752)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download rom from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR from xda DevDB (DOWNLOAD Tab)
Download Gapps from OpenGapps: http://opengapps.org/, choose Arm64 and Android 6.0
boot to recovery
wipe data if you are not coming from AICP 11 already
install rom and gapps
reboot
XDA:DevDB Information
[ROM] [6.0.1] Unofficial AICP11 MM - Jiayu S3 Plus, ROM for the Android General
Contributors
superdragonpt, fire855, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 5.x.y installed, custom recovery installed
Version Information
Status: Stable
Created 2016-07-26
Last Updated 2016-07-26
Changelog / Patch's
Changelogs:
Build 2 : 20160810
Source Synced ( (including Security Updates )
Fixed: Bluetooth (headset , car-BT)
Fixed: Internal Android VPN Client (tested on PPPT protocol)
Fixed Wi-Fi (random connection drops)
Added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
Fixed FMRadio (merged previous patch)
Minimal F.A.Q
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: Do we get The Fast Charge you guys made on Lollipop RC's ?
A: Yes, Fast Charge implementation was implemented on our MM builds
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues
Q: When using adoptable storage feature, my widgets fail loading, apps get slow , why?
A: Because NAND is much more faster than any SdCard, for better results you need a good Class 10 SDCard
Q: Some ROM translations are missing from mainstream, your custom features are not translated into my language, what can I do?
A: If you can translate into your language, send us the .XML (s) file (s) with translated strings and we'll be sure to add those into our builds.
Of course your name will be added on the chamgelog.
Q: Why there's no development options ?
A: Go to Settings >about phone, and tap 7 times on 'Build Number'
A: When device gets into deep sleep, my WiFi gets disconnected, and takes couple seconds to get back ON , after turning screen on again, why?
Q: Thank Google , its an Marshmallow new Feature.
Thanks for this great effort.
Many Roms, Much Flash. Wow.
Thanks again for all the support
Build Up
Happy flashing
superdragonpt said:
Build Up
Happy flashing
Click to expand...
Click to collapse
Hi!
Thanks for bringing these new devices to aicp
If you want to be a maintainer for aicp, we can bring these devices in and give official support and nightlies or weekly builds?
You can contact me or @semdoc. Maybe better him, because he's our main device guy
I'm now on AICP. Super work guys. One question... How do i enter recovery? There is no option on the power menu nor is the option to add it in settings? Thanks in advance.
Thanks. Really nice and smooth there.
there a way to resize the lock screen clock? It's too big and not showing the numbers.
Also anyway to close all recent apps instead of going through one by one?
Thanks for great ROM.
For lockscreen clock
Currently a Aicp issue.
Go to Settings >> Aicp >> slide the panel >>> lockscreen
Adjust the clock size, no matter the value it will fix the issue once you try to adjust.
There is also a recents menu in Aicp Extras where you can set a clear all button
You guys aren't exploring all the sh!t
@superdragonpt: try to include the lockscreen fix in main page, as this is a known and at moment Aicp issue. And easy to fix
genesisalgor said:
For lockscreen clock
Currently a Aicp issue.
Go to Settings >> Aicp >> slide the panel >>> lockscreen
Adjust the clock size, no matter the value it will fix the issue once you try to adjust.
There is also a recents menu in Aicp Extras where you can set a clear all button
You guys aren't exploring all the sh!t
@superdragonpt: try to include the lockscreen fix in main page, as this is a known and at moment Aicp issue. And easy to fix
Click to expand...
Click to collapse
That's an mainstream "issue" , surely will be "fixed " on future
The values can be designated on options so.
Nothing like we explore whole ROM, there's a lot to check as for options and customizations
Thanks
superdragonpt said:
That's an mainstream "issue" , surely will be "fixed " on future
The values can be designated on options so.
Nothing like we explore whole ROM, there's a lot to check as for options and customizations
Thanks
Click to expand...
Click to collapse
Yeah I meant Mainstream issue, this also occurs in my Moto E/G with same ROM.
Sweet! First time on aicp so didn't know about the extra menu hanging beside lol. All done nicely!
F.A.Q. added
There are too few users of S3Plus? No feedback? D:
rom is good, battery life better than belulah but not as good as stock (5.1). however UI fluidity / performance is the best among all 3.
youtube 1080p is slightly choppy but bearable.
camera is the same, if not slightly better.
screen brightness has better control now, ie least brightness in low light condition
GPS have not tried yet.
gyroscope seems to be the same ie not fixed
EDIT: gyroscope IS working
the only thing is the speaker sound seems to be quite soft compared to belulah and stock roms.
What do you mean by 'gyroscope not fixed'?
The M.A.D. Team
DerTeufel1980 said:
What do you mean by 'gyroscope not fixed'?
The M.A.D. Team
Click to expand...
Click to collapse
oops gyroscope is working. seems like it was the test app that wasnt good.
tried 2 phones on gyrodroid and both react the same way. my bad.
i think im gonna try navigating in a few hours' time. it does seem to respond better than stock/belulah
Back to RC5 :crying::crying::laugh::laugh:
I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, and want me to continue working on this projet, Feel free to buy me a cup of coffee @paypal
Introducing FusionX - S9 Port For Galaxy A8/A8+ 2018 ONLY FOR A530F/A530W/A730F
Some information you should know..
This is a full Samsung Galaxy S9 port with Android Version 10 | OneUI 2.5
This ROM is made with heavy collaboration from @corsicanu and @ananjaser1211 make sure to give them coffee.
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
Any sort of File Kanging will be reported without hesitation.
Release Note :-
As the nature of "Initial releases" tend to be, expect Bugs, i wrote down the ones i can see and that are actual issues that can affect people. so make sure to read them.
The F.A.Q and Notes page is more important than this entire post. it details stuff that you might need to do in order to avoid issues and not to look stupid reporting issues that otherwise wont happen.
Finally, This rom is only possible due to a TON of contributions from my friends @corsicanu and @ananjaser1211 without them you probably wouldn't have seen this ROM.
I have also included the majority of improvements , Aroma and edits from @corsicanu which im sure you guys are familiar with already.
HWC fix on this device was only possible by @ananjaser1211, without him I couldn't have been proceed with the camera fix.
Alright enough chit-chat. Enjoy the ROM. and do let me know in the thread how it is going on your end.
FEATURES
- Android 10.0
- G960FXXUCFTJ2 October release
- Odex System
- Zipaligned
- Full Samsung OneUI 2.5 Experience
- And all the goodies Android Q / Oneui 2.5 Brings
- Slightly debloated
- Magisk Supported
- RMM PrePatched
- Optimized for battery and performance
- Quantum Quack Kernel v1.0
- Contains all features from Galaxy S9 minus hardware specific ones (facelock/iris)
- All the original features are present (Wifi,Bluetooth, basic camera etc)
FusionX Port Features :-
- Always On Display(Aod Touch, Variable brightness)
- Samsung S9 DolbyAtmos
- Goodlock Support
- Bluelight Filter
- Many prop and feature tweaks and exclusive apps
- S9 Infinity Wallpapers
- Selectable Edge Panels and edgelighting+
- DE-Knoxed and disabled Additional samsung root prevention and security spams
- Full OMC setup with Many samsung supported countries
- Heavly optimised for A8/A8+
- Debloated via Aroma (Email, Calculator, Recorder, etc)
- Samsung NFC
- Samsung Avatar
- Bixby Vision + Home
- Samsung Screen Video recorder
- Samsung Smart View
- Digital Wellbeing
- Native AppLock
- Enabled some csc features (call record, status bar network speed etc.)
- Dual Messenger
- Patched for Single/Dual SIM + SDCard
- Google LiveCaptions
- And many more additions
Quantum Quack Kernel :-
- Full Android Q Support
- Compiled with GCC 4.9 toolchain
- Optimized for battery and performance
- Tons of under the hood improvements
- Upstreamed Linux 4.4.177
- WireGuard Support
- OC Little to 1.7Ghz
- UC big/Little to 200/500MHz
- DriveDriod Support
- Multi CPU Governors
- Multi I/O Schedulers
- Multi TCP Algorithms
- Wakelock Blocker v1.1
- Fsync Toggle on/off
- CRC Check Toggle on/off
- Disabled samsung security functions
- SeLinux Permissive
- State Notifier
- And many more additions
INSTALL STEPS
Note: Treble implementation is not required for this project
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK,VENDOR)
Flash the ROM.ZIP
Setup your rom and READ the F.A.Q for more information.
BUGS
- Bluetooth calls
- Torchlight Intensity Control
CREDITS
- @corsicanu and @ananjaser1211 For a ton of support with this Project.
- @TaifAljaloo and @somadsul for always supporting and being nice.
- @Astrako for Auto rotate and Hotspot Fix.
- @soulr344 for Brightness fix and all support.
- @Voytec83 and @yash92duster for all support with improvements on this project.
- @HovoAv and @arminhere for testing and being Awesome.
- Special thanks to my EliteTeam and TeamExyKings for always being supporting .
- If you helped in this rom and i forgot you, Send a PM or contact on Telegram.
Downloads. Changelogs , F.A.Qs below
XDA:DevDB Information
FusionX V1.0, ROM for the Samsung Galaxy A8+ (2018)
Contributors
prashantp01, ananjaser1211, corsicanu
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Pie
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2020-11-20
Last Updated 2020-11-20
DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
FusionX V1.0 based on Galaxy S9 port
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V1.0
-initial release
FAQ
Good idea to read this F.A.Q While the rom is installing
Q : Do I need to Treble my Device before installing this rom ?
A : No need to Treble your Device, if you already have the treble implementation, make sure you wipe the Vendor partiton.
Q : I have Symlinks error / Rom wont go past splash
A : As the AROMA Told you, don't pick all the bloat. and use default settings if you don't know otherwise
Q : My phone does NOT boot help pls
A : Ensure you have LATEST bootloader and modem installed, did all the wipes, and did your house chores. Make sure your device is supported from the given thread. If you had Treble, Wipe your Vendor partition.
Q : Device is running too hot
A : If it was just set-up, Give it time and make sure everything is up-to-date.
Q : My device is having Resolution issues/gliches
A : Go to Settings > Display > Screen resolution, and switch between them to get correct FHD+ resolution.
Q : Does NFC got fixed ?
A : Yes, NFC works !
Q : How to pass Magisk Safety Net ?
A : Enabled Magisk Hide from Magisk setting and it should PASS SafetyNet
Note: Do not report any bugs or issues without any detailed explaination and ADB logs. Make Sure you also read F.A.Q before asking anything. There are tons of videos or threads on xda regarding how to take logs. If you still want to act nerd than don't expect me to help you with the issues
reserved
Noice!
Gg nub
does this rom performance is similar to Qdroid's performance?
good night!
I can't download ...
I logged in to the ggogle drive account and I'm downloading ... thanks
I have been using FusionX for a while now.
No new bugs apart from what OP stated. I caught one Random Reboot but other than that it's working pretty good. SafetyNet works after using Magisk Hide Props Config. Thanks for your hardwork!
Hello from Russia! I want to say a big thank you for the ROM, I really like it. Tell me, is the Samsung DEX feature implemented in this firmware? Or at least projecting a screen to a monitor using a usb-c to HDMI cable?
DonBaton said:
Hello from Russia! I want to say a big thank you for the ROM, I really like it. Tell me, is the Samsung DEX feature implemented in this firmware? Or at least projecting a screen to a monitor using a usb-c to HDMI cable?
Click to expand...
Click to collapse
Not yet...
kindly fix bluetoth calls.
Hello guys, a little question, first of all a thousand apologies for any inconvenience it may cause and for my terrible English, I am Hispanic.
Well, given the warmths, I would like to ask the developer how I could get the Samsung voice assistant, (the screen reader), since, I am a blind user (My girlfriend, who sees correctly, will help me by reading the TWRP and the I will control it like a Robot haha, telling it click here, click here, slide that and so on, since, I know how to do things when installing a ROM), although I haven't done it for years, since my old S7 EDGE 3 years ago years. Well, that, checking the ROM, I see that it was removed, or so I think, if not, it would be good for the developer to correct me. That, I want to get the Voice Assistant that comes by default in the Samsung Firmware to use it from the beginning and not be asking my girlfriend to do something that I can do myself, also I want to put my accounts from the beginning, if it would not be a lot ask, please. Also, if there was any way I could download the Samsung TTS voice files for myself to include in the ROM, I saw the one for Spanish Spain, but it's really horrible. And if it is not too much to ask or if it is a lot of annoyance, where could I get the S20 "Media" folder for this S9 port. One last thing. I want to change the model number in the ROM, from my device "jackpot2lte" SM-A730F to SM-G960F, which is the Firmware Port of the ROM from the Build.prop line, in "ro.product.system.model = SM-A730F "My question is, can I do it, or if this has been tested before or will it cause any issues. I ask it because I used to do that a long time ago when I flashed, but since now many things have changed, before I do something stupid, I better ask it, although I do not think something happens, but still, I do not lose anything. Thank you very much to whoever responds to me, and again, my apologies for the case.
hello sir i have installed this rom but unfortunately when i restart the phone after installing the package it opens twrp .everytime i dont know what to do now pls help
Hi, I love the work that you did, but there's a lot of issues.
One of them, is when I install the ROM, appear two messages, one of them says that there's an issue with something with XML (I don't know what is) and the other problem appears when I install Magisk 20.1, It says that there's a issue with internal android system.
Finally, inside in Magisk, the SafetyNet doesn't work for me, all have this: ✖
Sorry for my English, I don't speak well, I hope you can undertand which were my issues.
Pd: If anyone know how can I solve this, please reply me. Thx.
Hello! I have a problem with calls. First call after phone restart goes good, but the second and all others are problematic. I can not hear anything, that others are saying. Someone have this problem and know how to fix it?
everything is great except bluetooth. i have a gear s3 and i can't connect it to my phone .......
is this going to be repair???
Добрый день. можно поподробнее про инсталлятор "АРОМА"? Хотелось бы узнать, что может быть вызвано неправильной установкой системы при ее включении. Благодарю.
Translation: Good day. Can you tell us more about the AROMA installer? I would like to know what can be caused by an incorrect installation of the system when it is turned on. Thank you.
Hello, I have been testing since yesterday I like this rom very much, I was pleasantly surprised when WiFi calling in my country started working .I have encountered a problem with recording calls. Recorded conversations before doing the update. I tried the system settings of the phone application but the folders "call" empty. The external call recorder application by skvalex does not record now , the application detected the phone as s9, I tried on them and on the exynos 7880.
sorry for my english translator.
Do i need to install G-apps?
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
PixelBlaster-OS is a Custom ROM based on PixelExperience and therefore AOSP. We have some customizations and UI enhancements. We put stability above all else and hence this ROM is not bloated with a large amount of customizations.
"This is a user-friendly thread, all your suggestions are important to us and will be taken into consideration."
- TheTablaster - Founder & Lead Developer
- Krishnakanth Shedge - Co-Lead Developer
- RealmeDiary - Designer & Support Team
- And Also Our Hardworking MaintainersWebsite
Download
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
Flashing
CLEAN FLASH :
- Download the latest build
- Reboot to Recovery
- Wipe Data/Cache/System
- Flash the ROM
NOTE: I always recommend following these steps. Also there's no need to flash any kind of MIUI Vendor.
What works?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Lights
Sound / vibration
Almost everything
What doesn't work?
Nothing yet
You tell me!
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
Credits
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Paranoid Android
- WaveOS
- PixelExtended
- Hycon OS
- Project-Awaken
- ABC ROM
- RevengeOS
- Others, I forgot to mention
Build Details
- Android OS version: 11.0
- Security patch: July 2021
- DEVICE: Redmi K20 Pro/Mi 9T Pro
- DEVICE CODENAME: Raphael
Sources and Documentation
- ROM Source Code
- OFFICIAL DEVICES
- Kernel Source
Support
TELEGRAM CHANNEL
TELEGRAM GROUP
thanks man
ROM is fast and smooth. GPS locks quickly here.
Fingerprint doesn't work for me in any ROM as my screen was replaced. D2W and Wireless display don't work. Hope the dev fixes it.
I intend to use it as my daily driver. Will report other issues as I come across. Thank you devs for your efforts.
Feature request: Call recorder.
Ashish.Yadav said:
ROM is fast and smooth. GPS locks quickly here.
Fingerprint doesn't work for me in any ROM as my screen was replaced. D2W and Wireless display don't work. Hope the dev fixes it.
I intend to use it as my daily driver. Will report other issues as I come across. Thank you devs for you
Click to expand...
Click to collapse
Ashish.Yadav said:
ROM is fast and smooth. GPS locks quickly here.
Fingerprint doesn't work for me in any ROM as my screen was replaced. D2W and Wireless display don't work. Hope the dev fixes it.
I intend to use it as my daily driver. Will report other issues as I come across. Thank you devs for your efforts.
Click to expand...
Click to collapse
If ur device FOD didn't work in any other roms include miui ?!! If yes . it might be hardware issue. U adviced to visit mi service center
. Then thanks for report wireless display issue. I will check nd fix it in next update .
Have a great day
Bug: System wide accent picker doesn't change QS tile colour. No way to change QS tile colour.
Feature request: QS tile for USB tethering.
Also I feel, battery life isn't upto the mark. Doesn't last a day with regular use. Requesting tune up.
Hey Dev... Any update planned?