Database Info

[ROM][UNOFFICIAL][4.4.4][GT-I9105/P][M12] Cyanogenmod 11.0 [2016/06/15]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo.
Device-specific source code for the Samsung Galaxy S II Plus:
https://github.com/ghsr/android_device_samsung_galaxys2plus-common
https://github.com/ghsr/android_device_samsung_i9105p
https://github.com/ghsr/proprietary_vendor_samsung_galaxys2plus-common
https://github.com/ghsr/android_kernel_samsung_galaxys2plus-common
Compatibilitiy patches:
https://github.com/doriandiaconu/android_build-tools_galaxys2plus-common
Do not submit bugs on CyanogenMod issue tracker
Downloads
ROM: https://basketbuild.com/devs/DorianDiaconu/CM11
GApps: http://wiki.cyanogenmod.org/w/Gapps
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera (photo & video)
Video playback
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Issues
Known device specific Issues
screenrecord does not work
Stock browser does not use hardware acceleration (Please use Firefox, Google Chrome, Dolphin, etc)
Known Sources Issues
Bluetooth Headset not working
FM Radio does not work (you can use SpiritFM, but I'm not providing support for any problem)
Does not work on 4.1 stock ROM's bootloader, please upgrade to 4.2 before flashing
Installation
Make a backup!
Make sure you are rooted
Be sure that you have the 4.2.2 bootloader
Install a custom recovery
Install the ROM using your custom recovery
Optionally install the Google Apps Addon
Wipe data if coming from stock
Don't submit bugs to me, if you didn't do a full wipe and you are coming from another ROM
For GT-I9105 flash NFC destroyer by @GHsR
FAQ
Can you include Feature X into your ROM?
No. This ROM will have CyanogenMod's feature set.
Can you include S-Note/S-Planner/MultiWindow/Insert Samsung App Here?
No. This is an AOSP ROM and cannot have TouchWiz applications.
Can you include call recording?
No. CyanogenMod does not include call recording to avoid potential legal issues.
Can you add Feature X to the stock ROM?
No. I don't work on stock ROMs.
What kernel does this ROM use?
A slightly modified version of the stock kernel, the source code is linked above.
I've heard that Broadcom doesn't release source, how can you make this ROM?
Contrary to the popular belief, userspace driver source code is not always required to make an AOSP-based ROM as long as the proprietary binaries shipped with the device does not modify the API too heavily (or is from a very different version of Android). Instead of modifying the source code of the drivers, the Android source code was adapted to be able to use the proprietary binaries.
Can I use your ROM as a base?
http://source.android.com/source/licenses.html
Most of Android/CyanogenMod is licensed under the Apache License with other small parts licensed under other open-source licenses. Which means that you may modify and redistribute without asking for permission as long as the proper credits is given and it is not misappropriated as being the official CyanogenMod. (In other words, you must say that it is based on pawitp's unofficial CyanogenMod, but is not related to CyanogenMod in any other way.)
Reporting bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your:
- Phone model (I9105 or I9105P):
- Radio (baseband):
- CM version:
- CM Download URL:
- GApps version:
Did you:
- Wipe:
- Restore with titanium backup:
- Reboot after having the issue:
Are you using:
- A task killer:
- A non-stock kernel:
- CMSettings/Performance settings (other than stock):
- Other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Screenshots
F2FS
From CM 11.0 M10, it is supposed to be compatible with LuK1337 's EXT to F2FS ROM converter:
http://forum.xda-developers.com/galaxy-s2-plus/development/linux-ext-to-f2fs-rom-converter-t2840303
Thanks
- The CyanogenMod team for providing a great ROM. Without all the compatibility work which went into it, this ROM would've been much harder to make
- @pawitp - for patches
- @CoolDevelopment, @LuK1337, @GHsR, @andixlm, @beastaki23 and other I9105/P and I9082 devs
If you like it, use it and don't forget to press the "Thanks" button or send me a beer via PayPal.
XDA:DevDB Information
[M12] Cyanogenmod 11.0, ROM for the Samsung Galaxy S II Plus
Contributors
doriandiaconu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.2.2
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-26
Created 2015-05-20
Last Updated 2016-07-16

New version online. Which would probably be the last version of CM11. It isn't really getting many updates.
Changelog:
- New device tree (with CM12 changes).
- Nebula kernel
- Optimized with ArchiDroid (Thanks to @JustArchi)
- ROM and kernel optimized with Linaro.
Thanks @GHsR for the help and @haky 86 for help in some technical problems.
This ROM is now as speedy as it could be. Both i9105/p are uploaded.
Gonna resurrect PAC/AOSPA KK now.

is the stock browser hardware accelerated ? or it remains an issue even after changing the tree ?

doriandiaconu said:
New version online. Which would probably be the last version of CM11. It isn't really getting many updates.
Changelog:
- New device tree (with CM12 changes).
- Nebula kernel
- Optimized with ArchiDroid (Thanks to @JustArchi)
- ROM and kernel optimized with Linaro.
Thanks @GHsR for the help and @haky 86 for help in some technical problems.
This ROM is now as speedy as it could be. Both i9105/p are uploaded.
Gonna resurrect PAC/AOSPA KK now.
Click to expand...
Click to collapse
Vibration is not working..atleast for me..great rom tho

DenisRonaldo798 said:
Vibration is not working..atleast for me..great rom tho
Click to expand...
Click to collapse
It's really because of the device tree. It isn't compatible with nebula kernel.

bloodofJesus said:
I saw a patch for vibration fix for nebula on github, does that not work ?
Click to expand...
Click to collapse
The device tree itself doesn't include the VibrationHW.java and I forgot to add it.

bloodofJesus said:
Wow, I'm utterly impressed, the speed is impressive, too bad archidroids optimizations don't work on lollipop , is it just me or lollipop is too heavy for the s2 plus ?
Click to expand...
Click to collapse
They should be working on LP. I'm getting some assembler errors at the moment. Hope to sort them out fast.

good job
doriandiaconu said:
The device tree itself doesn't include the VibrationHW.java and I forgot to add it.
Click to expand...
Click to collapse
hello @doriandiaconu,
you think that you can rewrite the ROM with support for vibration? because I think that this ROM is the best for our samsung s2 plus.
I believe that the best ROM in performance for this phone is the Cyanogenmod based on kitkat that is faster and more stable for constant use over time
I have tried both the ROM [5.1.1] Resurrection Remix® Lollipop v5.4.5 and the ROM [5.1.1] CandyRoms Candy5 Lollipop for GT-i9105 / P V2.5.1
It' true that these ROMs (lollipop) are nice with lots of features, but after a while of using, the phone is slow especially the dialer and often become almost unusable until the next reboot
---------- Post added at 05:01 PM ---------- Previous post was at 04:30 PM ----------
bloodofJesus said:
Wow, I'm utterly impressed, the speed is impressive, too bad archidroids optimizations don't work on lollipop , is it just me or lollipop is too heavy for the s2 plus ?
Click to expand...
Click to collapse
yes, I think like you that lollipop is too heavy for our phone...

problem with images
hello, after I have installed this version of ROM with the pico Gapps in the links below [new edit], many icons and images in google playstore are corrupted? any of you have this problem?
thanks
[edit]
I understood the problem: is't the new version of google playstore
In fact, taking a file with an older version of gapps the problem does not occur
[new edit]
sorry, but I committed an error when writing above. the gapps that I used the first time are the 5.1.x on the link http://forum.xda-developers.com/paranoid-android/general/5-1-x-5-0-x-4-4-x-pa-gapps-mirror-t3069879
I used the PICO version with an updated version of play store & play services
while those of the first page of this treat work great (but there are not the PICO version)

cappoccia said:
hello @doriandiaconu,
you think that you can rewrite the ROM with support for vibration? because I think that this ROM is the best for our samsung s2 plus.
I believe that the best ROM in performance for this phone is the Cyanogenmod based on kitkat that is faster and more stable for constant use over time
I have tried both the ROM [5.1.1] Resurrection Remix® Lollipop v5.4.5 and the ROM [5.1.1] CandyRoms Candy5 Lollipop for GT-i9105 / P V2.5.1
It' true that these ROMs (lollipop) are nice with lots of features, but after a while of using, the phone is slow especially the dialer and often become almost unusable until the next reboot
---------- Post added at 05:01 PM ---------- Previous post was at 04:30 PM ----------
yes, I think like you that lollipop is too heavy for our phone...
Click to expand...
Click to collapse
I will try to do it.

If I am not wrong vibration is work on this tree
https://github.com/hak86/android_device_samsung_s2vep/blob/cm-11.0/
at last IF i have port the new kernel successfully I will try to update kitkat version too xD

haky 86 said:
If I am not wrong vibration is work on this tree
https://github.com/hak86/android_device_samsung_s2vep/blob/cm-11.0/
at last IF i have port the new kernel successfully I will try to update kitkat version too xD
Click to expand...
Click to collapse
But it wasn't on the one ghsr did. I'm not using vibration so I didn't really intend to keep it XD

file gapps
bloodofJesus said:
I have this problem as well, which gapps did you use to fix this problem ? could you link it please ? thanks. @bloodofJesus
hello, these are oK: https://www.androidfilehost.com/?fid=23311191640114013
note that you need to re-flash the rom with the new gapps file
Click to expand...
Click to collapse

Cyanogenmod 11 CM12 - BEST SCORE for s2 plus
This ROM gives the best ANTUTU BENCHMARK score for this device: 14150
with lollipop 5.1.1 the score was from 12800 to 13100
This rom is confirmed as the fastest for this phone! if there was the vibration and adaptive brightness would be the best!

cappoccia said:
This ROM gives the best ANTUTU BENCHMARK score for this device: 14150
with lollipop 5.1.1 the score was from 12800 to 13100
This rom is confirmed as the fastest for this phone! if there was the vibration and adaptive brightness would be the best!
Click to expand...
Click to collapse
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please

TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
True, I want to install this rom, but without vibration I can't do anything

help for Adaptive brightness
TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
the problem is that when I check it, it simply doesn't work....do you have an idea? you think it could be the language settings of the device?
I will try to change to a different language...
[edit]
with english language, same result: doesn't work.
how did you se it's working? have you tried to set the backlight to low level and then see how it's light automatically?

TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
I will fix vibration and adaptive brightness. Just give me some time. I got a few exams in this period. I'm also trying to fix the LP builds.

cappoccia said:
the problem is that when I check it, it simply doesn't work....do you have an idea? you think it could be the language settings of the device?
I will try to change to a different language...
[edit]
with english language, same result: doesn't work.
how did you se it's working? have you tried to set the backlight to low level and then see how it's light automatically?
Click to expand...
Click to collapse
Ye, I've set brightness to the lowest possible, and was slowly making it brighter and brighter, and - as my settings app is white with dark-green header - the header turned completely black, and it simply worked XD or maybe it's just me understanding the ,,adaptive brightness'' wrong, sorry if so.

TyMoOteUuSz said:
Ye, I've set brightness to the lowest possible, and was slowly making it brighter and brighter, and - as my settings app is white with dark-green header - the header turned completely black, and it simply worked XD or maybe it's just me understanding the ,,adaptive brightness'' wrong, sorry if so.
Click to expand...
Click to collapse
unfortunately when I enable the adaptive backlight the screen remains dark and does not light as in other ROM I tried....
---------- Post added at 03:04 PM ---------- Previous post was at 03:02 PM ----------
doriandiaconu said:
I will fix vibration and adaptive brightness. Just give me some time. I got a few exams in this period. I'm also trying to fix the LP builds.
Click to expand...
Click to collapse
Many Thanks! I will wait for your new versione. good luck for your exams

[ROM][UNOFFICIAL] CyanogenMod 12.1 [5.1.1] Wiko DarkMoon [MT6582] and Clones

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my CyanogenMod 12.1 (Android 5.1.1) Rom for the Wiko DarkMoon (Mediatek MT6582 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Source Build, so it will NOT be supported by the CyanogenMod Team
It also work without any issues on the clones:
- Micromax a200 Canvas turbo Mini
- BLU Life Play S
- Myphone Agua Iceberg Slim
- QMobile Noir A910
CyanogenMod 12.1 Status:
Working:
- RIL: Telephony (Calls / etc) (2G and 3G) (In Both SIMs)
- ART
- Sensors
- LED's
- Rear Camera ( pictures )
- Front Camera ( pictures )
- FlashLight
- Sound
- Bluetooth
- Wifi
- Microphone (For Calls and in some apps)
- Data connection
- CyanogenMod related features (Theme Manager, etc ... )
- GPS and aGPS
Not Working / Needs Improvements :
- Camcorder ( WorkAround: use 3rd party video recording apps from Play Store)
- USSD codes. only works in some Providers
Single / Dual SIM Behavior :
On Dual-SIM (when using both SIM slots) :
3G Will be forced to Slot 2 (Depending on your SIM Provider)
Data connection will only properly work on Slot 2 (Depending on your SIM Provider)
On Single-SIM (when using only one SIM slot) :
You can toggle between 2G / 3G just fine
Data connection will work just fine
Also when in Single-SIM and to avoid bugs with Data connection
Change this line in build.prop (/system):
Code:
persist.radio.multisim.config=dsds
to
Code:
[B]#[/B]persist.radio.multisim.config=dsds
Flash Instructions:
Backup, Backup, Backup ...
You need to be on the Unofficial KitKat Base (due to the new KK partitions)
Put the cm-12.1-xxxxxxxx-UNOFFICIAL-darkmoon.zip on external SDCard
Flash the new CWM Recovery 6.0.5.1 (This is no touch recovery), you can flash with flashify app, or by SPFlashTools.
Full Wipes
Flash Rom
Flash minimal GAPPS 5.1
Enjoy
GPL Compliance:
Kernel: https://github.com/dragonpt/Kernel_3.4.67_KK_Wiko_DarkMoon
Device: https://github.com/dragonpt/android_device_wiko_darkmoon
Vendor : https://github.com/dragonpt/android_vendor_wiko_darkmoon
Credits:
CyanogenMod Team
OMNI Team (specially XpLoDWilD and Dr-Shadow)
chrmhoffmann
fire855
ariafan
axet
Santhosh M
moonrotation--> Al3XKOoL
DerTeufel1980
XDA:DevDB Information
[ROM][UNOFFICIAL] CyanogenMod 12.1 [5.1.1] Wiko DarkMoon [MT6582], ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Newest CWM
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2.0
Beta Release Date: 2015-06-29
Created 2015-06-27
Last Updated 2015-08-22

Changelogs
Beta 5 (August 10 2015)
FIX: GPS and aGPS ( @DerTeufel1980 , thanks for the help)
Minor issues adressed
Beta 4 (July 17 2015)
Sync with CM
Fix: Camera problems on latest 5.1.1 source
Fix: Calls problems on latest 5.1.1 source
Small other tweeks
Beta 3 (July 12 2015)
Sync with CM (and fixed the sources)
Now on the latest Google's android LMY48G (now at 5.1.1_r6)
(Changelog is Huge, please check CyanogenMod full changelog on their site or gerrit )
Removed some pre-compiled vendor .blobs, we don't need them now.
Fix: Some telephony issues
Beta 2 (July 05 2015)
(Built on 29 June 2015)
Sync With CM (29/June)
FIX: WiFi (New LP WPA_supplicant, etc)
ADD: External SDCard RW Permissions
Other small issues addressed
Beta 1 (June 27 2015)
First Open release
Sync with Latest CM source
Beta 0.01 (June 22 2015)
Open Beta for testers
Alpha Builds (xxx -> June 21 2015)
Internal Builds
Downloads:
Are on XDA dev-DB (The "Download" TAB)
If you are in TapaTalk, or can't see the page Tabs press here:
http://forum.xda-developers.com/devdb/project/?id=10541#downloads
Alternative Downloads:
New TWRP For CyanogenMod / Lollipop
--> Flash from your current recovery
https://www.androidfilehost.com/?fid=24052804347767497
5.1 Gapps
https://www.androidfilehost.com/?fid=24052804347772344
.

F.A.Q
Q: Is this Rom rooted?
A: Yes, this is CyanogenMod
--> Enable Dev. Options by tapping 7 times on Build Number > Enable root there
Q: I can't flash this Rom on recovery, why?
A: You need to update your recovery in order to flash this CM Builds , check under the Download Section
Q: Is this ROM Multi-Language ?
A: Yes ...
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: CyanogenMod haves this features in-built under Settings> Performance
--> there you can change Governors / IO's , etc
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where's the FM Radio?
A: CM doesn't support FM Radio, for MTK's , im working on it
Q: I cant Sync with Google (contacts, etc), why?
A: Just make sure, gps is OFF and reboot, it'll work now
Q: Is Xposed Framework and his modules compatible with CM 12.1 ?
A: Xposed for Lollipop 5.1 is still W.I.P, test it yourself, with precaution...
Q: Can i revert to stock ROM after ?
A: Sure you can! You just need to flash the Stock Wiko JellyBean 4.2 ROM via SPFlashtools. Or just download the wiko software tool from their site.
Q: Can i revert to your Unofficial KitKat ROM after ?
A: Sure, just revert to the older recovery, and flash the unofficial kitkat Rom
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s) :fingers-crossed:
.

Thank you so much for this!!!! So if i use a third camera app from the playstore, video recording will work?

claudiuh said:
Thank you so much for this!!!! So if i use a third camera app from the playstore, video recording will work?
Click to expand...
Click to collapse
Yes some will work just fine, i use this one:
https://play.google.com/store/apps/details?id=com.androidillusion.videocamillusion&hl=en
cheers

Excelent work, thank you
Doesn't memorise my wifi network. Can anyone confirm?
Also, how do we move apps to sd card?

Downloading it now. Okay wait so if i want to flash back to kk i need to be on stock wiko first? U mean i cant just flash unofficial kk from cm12?

Great Work
You are a beast man , keep working

awesome work bro !!!!

Good work !!
Good custom rom it's working but it's having problems with sync google account. It's maybe because the Gapps?. And the battery is quickly discharge
I'm sorry if my english is incorrect because I don't speak english fluent
Thanks for your work :highfive:

angelobap96 said:
Good custom rom it's working but it's having problems with sync google account. It's maybe because the Gapps?. And the battery is quickly discharge
I'm sorry if my english is incorrect because I don't speak english fluent
Thanks for your work :highfive:
Click to expand...
Click to collapse
hi
from the FAQ:
Q: I cant Sync with Google (contacts, etc), why?
A: Just make sure, gps is OFF and reboot, it'll work now
cheers

Both Sim Blocked
The rom is perfect I love it, and is soo smooth. But I got problemwith the sim it blocked Both and I don´t Know how to fix that.

superdragonpt, this is the rom that you will be remembered for. Excellent job. This is not a port, its a creation! You just made a kernel out of scratch just so you can bring lollipop to our devices so I thank you for that. While we both know that the rom is far from perfect, i hope you will continue to bring us updates and bug fixes. Wish you all the best superdragonpt!

@snapdragonpt i am again facing camera bug....front camera blackish at edges.....quality is not upto mark.....though i didnt face that dual sim problem ...i can easily use 3g on slot 1.....viasuals are good.....performance is good.....but no contact display option for sim....and everytime sim blocked,....minor bugs u can fix....thas all i found ..hope it will help you for a stable version

Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Plus, everything developed for this device is all WIP, since we never ever got any source .
- The KitKat Rom is unofficial, and made from scratch ...
- The CyanogenMod 11 & 12.1 also.
There's minor issues (since my unofficial KK) that are related with my kernel (cameras needing manual compensation, etc )
Regarding cameras: that's the best i was abled to do without any kind of sourcecode, i had to write our own drivers...
If you manually adjust the exposure / whites, it takes good pictures, but don't expect it to be like in the (very old) JellyBean 4.2.2 (stock) Rom.
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers

superdragonpt said:
Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers
Click to expand...
Click to collapse
We understand superdragonpt and we are willing to wait, i just hope you will not desert this project until atleast most of the bugs are fixed. I can list you all the bugs that i have found if it will make your job easier.
BUGS:
1. Yes, the blueish tint. While it is adjustable on KK and CM11, CM12.1 tells it different, we dont have the white balance option on our default camera app. Im certain using third party or post editing the image will fix it though.
2. No move apps to SD. This is common on almost ALL lollipop roms so no surprises there, we just link our apps with Link2SD.
3. We have some dangerous bug concerning brightness. Turn Adaptive Display on (auto brightness) and then manually turn down the brighness and u get a pitch black screen. Dangerous if you dont know the position of the slider.
Alternatively if u turn Adaptive Display off and turn Battery Saver on, you will get a pitch black screen if you turn the brightness to its minimum.
4. LED notifications, yes they light up but they stay lit. If u get a low battery youre supposed to get a blinking red, but with this bug u get a continuous red light. Same with texts but with an endless green. Im sure third party apps can do something regarding this.
5. Heads up notifications does not work with every app. Turning it off did not fix it either. The only heads up notif i get is from facebook and calls, but it wont give u heads up for text messages or games.
6. There is a youtube bug. This one im not sure if its an isolated problem. If you are watching videos sometimes it will stop and refuse to play unless you click on a new video and click back to the one you were watching.
Other than that, this rom is great! It is not as stable as your KK 4.4.2 which is my personal favorite I must say. But bringing lollipop to the table is good enough already so kudos to you. Thank you superdragonpt.

halogenn said:
We understand superdragonpt and we are willing to wait, i just hope you will not desert this project until atleast most of the bugs are fixed. I can list you all the bugs that i have found if it will make your job easier.
BUGS:
1. Yes, the blueish tint. While it is adjustable on KK and CM11, CM12.1 tells it different, we dont have the white balance option on our default camera app. Im certain using third party or post editing the image will fix it though.
2. No move apps to SD. This is common on almost ALL lollipop roms so no surprises there, we just link our apps with Link2SD.
3. We have some dangerous bug concerning brightness. Turn Adaptive Display on (auto brightness) and then manually turn down the brighness and u get a pitch black screen. Dangerous if you dont know the position of the slider.
Alternatively if u turn Adaptive Display off and turn Battery Saver on, you will get a pitch black screen if you turn the brightness to its minimum.
4. LED notifications, yes they light up but they stay lit. If u get a low battery youre supposed to get a blinking red, but with this bug u get a continuous red light. Same with texts but with an endless green. Im sure third party apps can do something regarding this.
5. Heads up notifications does not work with every app. Turning it off did not fix it either. The only heads up notif i get is from facebook and calls, but it wont give u heads up for text messages or games.
6. There is a youtube bug. This one im not sure if its an isolated problem. If you are watching videos sometimes it will stop and refuse to play unless you click on a new video and click back to the one you were watching.
Other than that, this rom is great! It is not as stable as your KK 4.4.2 which is my personal favorite I must say. But bringing lollipop to the table is good enough already so kudos to you. Thank you superdragonpt.
Click to expand...
Click to collapse
Hi
~
Thanks for the bug list, it really helps, since im wasting most of my time compiling and check issues.
1: The new CyanogenMod 12.1 camera lacks some settings, so, yes, you can't adjust camera settings just like in KK.
--> Workaround, use another camera app from the Play Store
--> Same goes for recording videos ( there's an Play store link on first page for a camera app, that works great for recording videos ...
2: There's nothing i can do regarding this
3: Adaptive Display : Yes it needs some re-calibration
4: Led: It works but doesn't blink (minor bug )
5: Seems to be an problem with CM release
6: Should be fixed on next release
Thanks for the feedback
cheers

superdragonpt said:
Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Plus, everything developed for this device is all WIP, since we never ever got any source .
- The KitKat Rom is unofficial, and made from scratch ...
- The CyanogenMod 11 & 12.1 also.
There's minor issues (since my unofficial KK) that are related with my kernel (cameras needing manual compensation, etc )
Regarding cameras: that's the best i was abled to do without any kind of sourcecode, i had to write our own drivers...
If you manually adjust the exposure / whites, it takes good pictures, but don't expect it to be like in the (very old) JellyBean 4.2.2 (stock) Rom.
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers
Click to expand...
Click to collapse
so there is no way to fix camera you said only on some devices some are working ? you tried to replace modules from jb ? should i try ? but i cant coz i have this device as my daily driver........ i know whatever u r doing is just great n i appreciate you...in fact we all do !
As i know micromax a120 have same specs even unite 2 have same chipset, can you try using unite 2 lollipop module ? i think someone should try if you have this device as a spare device !
Sent from my Micromax A200 using XDA Free mobile app

Is there any way to move apps to external sd? I always get an error with link2sd, and my internal memory is already full

Akash sky said:
so there is no way to fix camera you said only on some devices some are working ? you tried to replace modules from jb ? should i try ? but i cant coz i have this device as my daily driver........ i know whatever u r doing is just great n i appreciate you...in fact we all do !
As i know micromax a120 have same specs even unite 2 have same chipset, can you try using unite 2 lollipop module ? i think someone should try if you have this device as a spare device !
Sent from my Micromax A200 using XDA Free mobile app
Click to expand...
Click to collapse
It wont work because micromax a120 has a different kernel despite having identical specs. Flashing it would result in a brick.
Goncalo29 said:
Is there any way to move apps to external sd? I always get an error with link2sd, and my internal memory is already full
Click to expand...
Click to collapse
Yes moving apps to sd doesnt work because our "external sd" is just emulated from internal sd. Which means our external and internal is just one. I dont know, i think thats just how lollipop works. Link2sd does work fine for me. Im using the free one from play store because if you try to use a cracked link2sd pro ull have a "Package invalid" error.

[6.0.x] [SM-T320] CyanogenMod 13.0 Nightlies for the Tab Pro 8.4 Wifi (mondrianwifi)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* Exfat support is done at a CM level (not device related) and last I checked has not been added yet. It should get added eventually.
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* Stable: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
* Too soon to know what's best, I'm currently using the Slim pico package myself.
Useful Links
Unofficial changelog
Mondrianwifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 13.0 for MondrianWiFi, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2015-11-24
Last Updated 2015-11-24

Reserved

Wow, thanks ! It was a surprise that our tab was one of the first devices that took cm13 nightlies !

Wow. I remember when cm12 were first rolling out we were lucky enough to be one of the first to get it, now we're the first samsung device to get cm13 thanks to Christopher Palmer. You're the MAN!! :good:
Edit - enabling root in developers option but apps only get partial root. It seems like we're unable to write to system.

Initial bugs (cm-13.0-20151124-NIGHTLY-mondrianwifi - for who didn't see the other thread)
1. ExFat is currently broken so SDCards~64GB and larger (that use this filesystem) won't work
2. root (adb & apps) (can't mount /system rw with rootexplorer, esfilemanager ..etc) - not sure bug origins
I am currently using the Slim Gapps they don't crash, and are pretty stable.
Slim_zero_gapps.ALPHA.6.0.build.0.x-20151121.zip (current as of this post*)
Geekbench 3 score = 914 - 2597
AnTuTu v5.7.1 = Crashes on the Project Anarchy 3D test. (possible app bug)
AnTuTu v6.0 Beta2 (from their website) = 44773
So far the interface is smooth and lag free, for people who don't want to test or run into bugs I would wait until the stable build for the best experience .
@OP-Correct link to Change log (though 13.0 makes more sense)
http://www.cmxlog.com/13/mondrianwifi/
Anyways great news that we are some of the first devices to get CM13 / Marshmallow, and great work crpalmer!
(I hope Samsung saw this news and feels ashamed for their lack of support and updates)

Am I doing something wrong or SD cards can't be set as internal storage yet? Anyway, thank you for your great work!

user91 said:
Am I doing something wrong or SD cards can't be set as internal storage yet? Anyway, thank you for your great work!
Click to expand...
Click to collapse
Can't be used from inside apps yet, either. For example, Plex or Google Music can't store synced media there... To be expected with such a new release.
Perormance, in the short time I used the tab last night, is night and day better than cm12.1 for me.

KarlDag said:
Can't be used from inside apps yet, either. For example, Plex or Google Music can't store synced media there... To be expected with such a new release.
Perormance, in the short time I used the tab last night, is night and day better than cm12.1 for me.
Click to expand...
Click to collapse
Will cm12.1 continue to get updates while this is getting sorted?
Sent from my SM-G925F using XDA Free mobile app

Only issue I've found so far is GoogleCamera 3.1 cannot initialize video recording, but the AOSP Camera can. Never seen that before.

sualpine said:
Only issue I've found so far is GoogleCamera 3.1 cannot initialize video recording, but the AOSP Camera can. Never seen that before.
Click to expand...
Click to collapse
I have the same problem on my Xperia Z3 running Marshmallow, so likely not a ROM issue.

I used Open Gapps (http://opengapps.org/).
I selected ARM, 6.0 Mini and they work great. The had tried the Micro version but they crashed constantly.

Just a quick suggestion - you should change the [5.1.x] in the title of this thread to read [6.0.x] to avoid confusion.

spiff72 said:
Just a quick suggestion - you should change the [5.1.x] in the title of this thread to read [6.0.x] to avoid confusion.
Click to expand...
Click to collapse
Well said
Sent from my SM-G925F using XDA Free mobile app

Noticed the issues like others on. The ROM not recognizing ext card. But also I can't install SuperSu? Anyone know if CM13 is on a systemless root?

johnp357 said:
Noticed the issues like others on. The ROM not recognizing ext card. But also I can't install SuperSu? Anyone know if CM13 is on a systemless root?
Click to expand...
Click to collapse
Developer options > enable SU

Xmas comes early this year ))
First time ever I'm on the first CM nightly build for any of my devices <3
for the very first build it works not bad, no gapps or xposed tried yet though.
two things noticed:
wifi connection seems more unstable than on cm12.1.
antutu app crashes all the time when trying to run 3D benchmark. So currently cannot even get a full rating from antutu just yet.

This runs beautifully for me. Using Slim_zero_gapps.ALPHA.6.0.build.0.x-20151121.zip with no crashes. Only bugs I've run into:
1) after installing Google Now launcher, I had to reboot before it let me switch launchers. Works perfect after reboot
2) Google Camera 2.5.x crashes when processing a Lens Blur photo. Regular photos and video work fine.
Very few issues :good:

does not see the sd card.
How does improve?

kkalkan said:
does not see the sd card.
How does improve?
Click to expand...
Click to collapse
Make sure you read the thread a bit before posting - it's only 2 pages (so far).
I'm betting your card is exFat, as reading the thread that is not compatible (yet).
It's also in the OP under "Known Issues"...

Some other bugs,
1. root cannot change the /system to rw mode for some reason (will try adb later), with toybox mount -o remount,rw /system, busybox mount -o remount,rw /system, mount -o remount,rw /system all get permission denied, I can however change the / partition to rw - ( I heard this is a feature in android M, but still not sure)
2. when you power off the tablet there is no battery icon
3. I don't think the battery gauge is accurate, looking at logcat I don't think it's reading the stats
4. brightness adjuster in notification pulldown is too large
5. wifi is iffy with hidden networks (won't automatically connect), and it drops off alot.

[ROM] [16 Jan 2017] Unofficial CyanogenMod 13 [6.0.1] [Beta]

CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
These are unofficial Beta builds of CM13 for the Oppo f1f.
To hear about the latest updates and changes to CyanogenMod as a whole, you can follow +CyanogenMod on Google+!
My change log is in post #2.
Code:
#include <stddisclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What doesn't work yet
- You tell me
Installation Instructions
You must be on 010 ColorOs firmware to use this rom. If you are on a newer version of ColorOs and hvae problems with things like wifi you can flash the firmware from that version with the zip file in the optional extas post (post#3)
1. You must unlock your bootloader using magictricks.zip supplied by @uberlaggydarwin.
2. You must have a custom recovery installed that allows SELinux. Get TWRP build for Oppo f1f from here.
3. Download the current Oppo f1f build from here.
4. Get Gapps from here.
5. Download the latest kernel update from here.
6. Fully wipe your device from TWRP Recovery. eg WIPE > SWIPE to Factory Reset.
7. Install Rom , Gapps and kernel update from TWRP Recovery then Wipe dalvic and cache then Reboot.
Credits
- @uberlaggydarwin Without all his work this would never be possible. So please thank him. The bootloader unlock and original kernel for this is all his work.
- CyanogenMod Team.
If I have missed anyone please let me know and I will happily add to the credits.
XDA:DevDB Information
CM13 for Oppo f1f, ROM for the Oppo F1
Contributors
MiniBlu, uberlaggydarwin
Source Code: https://github.com/MiniBlu
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: magictricks bootloader, twrp recovery, ColorOS V2.1.0i - F1fEX_11_160507 firmware
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: Beta1
Beta Release Date: 2017-01-16
Created 2017-01-22
Last Updated 2017-02-21

Change Log
- 21 Feb 2017 - Updated kernel Release (Based on latest CM re-based kernel source)
- Battery battery life and performance
- Improved audio

Optional Extras
- Updated Kernel for the 16 Jam 2017 release. Here is and updated kernel that you can flash on top of the 16 Jam 2017 release. Just flash it from TWRP then wipe dalvic and cache and reboot (make sure your phone is fully charged first as re-optimizing all you apps will take a lot of battery).
- ColorOs 010 firmware can be flashed with this zip.

Does on screen and off screen gestures work? Screenshots plz

AnantNigam said:
Does on screen and off screen gestures work? Screenshots plz
Click to expand...
Click to collapse
Screen off yes screen on no. I might do some screenshots at some stage but its just stock cm13, they all look the same. Its only a beta testing version, still a lot of real work to do on it before I worry about things like that.

Thank you! So this is the problem that I've had when I use the rom:
- Sometimes I cannot unlock the lock screen settings to reset the new screen lock.
- The Camera app sometimes will crash when I try to record.
- The battern drain is quite fast. (as you mentioned)
Other than these, I think the rom is really great.. :good:

Do we have to install old firmware to make wifi work?

AnantNigam said:
Do we have to install old firmware to make wifi work?
Click to expand...
Click to collapse
If you have the latest update, then yes. Just flash the color is ROM mentioned in the requirements section of the op first. I'll add a smaller firmware only zip to the op tomorrow.

Hey
Nice to see development taking place for our oppo f1. Thnx fr ur hard work
I just wanted to know if VOLTE working?
Thank you

Nice ROM , Thanks!
I found some problems :
-Camera
Crash when I switch from front camera to back camera and vice versa , crash too when I switch from photo mode to video mode and vice versa.
-Battery
Battery drains fast , and the charging time is becoming fast too
sorry for my bad english

Thanks so much you two for giving this's phone hope.
I was having the same problem with battery life. Maybe 2 hours from 100-0 then miniblu suggested. Turn off all the settings in display and lights that would drain power. Yesterday I got 12 hours out of it with lite usage . The battery expected life in setting isn't correct so don't trust the expected time (it drains to 80% in like 30 min then the rest can last another 12 hr on lite usage).
-little bugs I've noticed- camera app was a bit buggy first time I opened it up. (Reboot fixes it)
-when u leave to camera app what was left on the screen is your wallpaper for 2 seconds.
I can use this phone no problems everyday. I would recommend to anyone. Just make turn of any unessasary settings in screen off and it's prefect. I found nothing else wrong with this rom.
Thanks so much for this Minblu and uberlaggydarwin

This seems like the best place to ask:
Optus in Australia released a network locked version of the Oppo f1f with some startup/shutdown branding for a reduced cost. They also disabled the second SIM slot that this phone has in other countries.
My question is, could the ability to use the second SIM slot be activated by using a custom ROM such as this one, or is it more likely that Optus have crippled or possibly even removed the actual components from the handset?
Thanks, and thank you for the development effort you're putting in to this. I look forward to trying it out over the weekend.

Audio crackling sound
Thank you very much for the effort and time that you put in making this rom possible.
I have a question.. is anybody else experiencing audio problems when using headphones or earphones? There's like a crackling sound while I'm listening to music.

Yeah. Go into audiofx and turn down the bass or vitualizer until it doesn't make that noise anymore?

Jamie_oppo said:
Yeah. Go into audiofx and turn down the bass or vitualizer until it doesn't make that noise anymore?
Click to expand...
Click to collapse
I've already tried it but it didn't work. There's still this annoying sound like static. I thought it was the phone so I reverted back to coloros but when I tried, the sound is back to normal so I'm guessing it must be a bug in the cm13 rom.

revesxxa said:
This seems like the best place to ask:
Optus in Australia released a network locked version of the Oppo f1f with some startup/shutdown branding for a reduced cost. They also disabled the second SIM slot that this phone has in other countries.
My question is, could the ability to use the second SIM slot be activated by using a custom ROM such as this one, or is it more likely that Optus have crippled or possibly even removed the actual components from the handset?
Thanks, and thank you for the development effort you're putting in to this. I look forward to trying it out over the weekend.
Click to expand...
Click to collapse
IIRC Oppo claimed that the Optus F1f had the second SIM hardware physically removed.

MiniBlu said:
reserved
Click to expand...
Click to collapse
One last question please does VoLTE works with this rom?

Problems
-Camera crash and maybe not connected
-CPU always run full load (very bad problem)
-battery drain (because cpu full load always)
-more heat (because of cpu too )
-screen backlight always on when i turn off charging
-often Battery not +℅ when i turn on charging
-in choose manual network menu not show 4g signal for select
-cpu hotplug not support in cpu tuner apps
And everything is fine :good::good::good:
This rom better than project spectrum because can boot in to twrp recovery
I hope you will fix all problems
And port rom to cm14-14.1 soon
-----------------
Sorry for my bad English

It so awesome!!!
I've been waiting for this on my f1 , a cyanogenmod 13..thank you so much MiniBlu and of couse @uberlaggydarwin the great developer...i will install it in this weekend..thanks a lot again!!!!:good:

tianly_199 said:
Thank you very much for the effort and time that you put in making this rom possible.
I have a question.. is anybody else experiencing audio problems when using headphones or earphones? There's like a crackling sound while I'm listening to music.
Click to expand...
Click to collapse
It's to do with the digital mixers distorting the sound as it boosts it. In system/etc/ there is a file called mixer_paths_mtp.xml, where you can edit volumes through the speakers and headphones. A quick fiddle around with RX values makes it slightly better, but it's still there.

[ROM[6.0.1][MT6572][Build] CyanogenMod 13.0 for Micromax A102

This Project has been moved HERE
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
Dual SIM
Wifi
Bluetooth
Audio from loud speaker
Smooth
RIL
Sensors
GPS
USSD
FM Radio
Storage
Etc.
Bugs
Camera
Microphone doesn't work while calling
Very less audio from calling speaker
VPN
Offline charging
Installation Instrctions
Download the ROM & GApps package
Put them in SD Card
Wipe System,Data,Cache
Install the ROM ,then GApps
Reboot!
First boot might take 15 minutes.
Changelog
Code:
- This is a source built ROM for Micromax A102/MT6572.
- MT6572 blobs used for avoiding lags and bringing up Stability.
Downloads
ROM: Please check the latest stable build from HERE
GApps: Open GApps
Credits/Thanks
Code:
[LIST]
[*]@fire855 (CM13 MT6592)
[*]@ferhung (CM13 MT6582)
[*]@Aditya Kr (CM13 MT6572)
[*]@Axet
[*]@chrmhoffmann
[*]@DerTeufel1980
[*]@Al3XKOoL
[*]@kashifmin
[*]@Santhosh M
[*]@ariafan
[*]@hyperion70
[*]@GMCadiom (For building up the ROM from source with his fast server)
[*]Android Matrix Development Team (Supporting Team)
[*] CyanogenMod Team
[/LIST]
Device & Vendor
Device: https://github.com/adi766/android_device_Micromax_A102
Vendor: https://github.com/adi766/android_vendor_Micromax_A102
XDA:DevDB Information
CyanogenMod 13.0, ROM for all devices (only MT6572)
Contributors
Aditya Kr
Source Code: www.github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock KitKat
Based On: CyanogenMod
Version Information
Status: Testing
Created 2017-03-01
Last Updated 2017-03-01

I see you beat me to it. Well done :highfive:.

Wonderful job

kirito9 said:
I see you beat me to it. Well done :highfive:.
Click to expand...
Click to collapse
Thanks

so far so good, I have been using it since the release, It's the most smooth rom I have ever used, I tested it for 3 days, nothing weirdo so far, I'm so impressed by your great work, it beats the stock rom , Very well done, I have a short list of bugs, you might be able to consider when you have to time,
-Gapps issue, Hopefuly I have the logs
-the screen blinks sometimes (Minor bug)
-hmm here is somthing strange , Please consider fixing it, web browser (uc browser & cm browser) crashes randomly, I tried to mess with libs and take a logcat and I could'nt identify the issue, one more thing HD games crashes sometimes and sometimes work normally, I noticed something when Hd games work the app drawer icons are a bit bigger than when Hd games don't work
btw, I had an issue like that before and I fixed it by using boot.img of an emulated storage rom
please provide emulated storage patch
Thank you in advance and hope you consider solving these issues ( as I'm doing on my own)
Good luck

The Invizible said:
so far so good, I have been using it since the release, It's the most smooth rom I have ever used, I tested it for 3 days, nothing weirdo so far, I'm so impressed by your great work, it beats the stock rom , Very well done, I have a short list of bugs, you might be able to consider when you have to time,
-Gapps issue, Hopefuly I have the logs
-the screen blinks sometimes (Minor bug)
-hmm here is somthing strange , Please consider fixing it, web browser (uc browser & cm browser) crashes randomly, I tried to mess with libs and take a logcat and I could'nt identify the issue, one more thing HD games crashes sometimes and sometimes work normally, I noticed something when Hd games work the app drawer icons are a bit bigger than when Hd games don't work
btw, I had an issue like that before and I fixed it by using boot.img of an emulated storage rom
please provide emulated storage patch
Thank you in advance and hope you consider solving these issues ( as I'm doing on my own)
Good luck
Click to expand...
Click to collapse
For gapps issue,check weather you are using proper GApps or not(ARM,6.0.1)Pico(As I used).And you have to flash the GApps right after flashing the ROM(without rebooting).
For blinking issue check libs related to graphics if you have ported this ROM to another device(i.e. hwcomposer,gralloc).
CM & UC browser works fine for me.
I did not tested any games yet.
For emulated storage use fstab.mt6572 from emulated ROM.

How to port? Same like porting cm12.1?

ril_keda said:
How to port? Same like porting cm12.1?
Click to expand...
Click to collapse
Yes