Database Info

[TUT]How to ROOT LAVA IRIS n320/n350[CWM] [CONFIRM WORKING]

Hey XDA folks i own a LAVA IRIS n320 (Basic Droid Phone) for past months i tried to search various methods of rooting it and installing the clockworkmod on the device.
Device Specifications are listed here : http://www.fonearena.com/lava-iris-n320_2372.html
N350 : http://www.fonearena.com/lava-iris-n350_2371.html
First of all i could like to thank @getmesar due to his method i got it work ! Love ya dude ! :laugh: :good: :good:
These devices are almost the same hardware specs With both being Meditak MT6575 Chipset Hardware :highfive::highfive:
NOTE:THIS CAN BRICK YOUR DEVICE IF YOU DID NOT DO PROPERLY I AM NOT RESPONSIBLE FOR WHAT HAPPEN TO DO YOUR DEVICE.
Let the Rooting Process Began :
We Need Following things ::cyclops:
1.MTKDROID root and tools : Here
2.SP_Flash_Tool_v3.1224.01 : Here
3.Drivers : MediaTek-1.1123.0 : Here
Got rOOt?
1.Making the Scatter File :
Open the MTKdroid tools and create the scatter file as shown in the pic and save the file in a good place(where you can remember)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Prepare the Scatter File: Open the SP TOOLS where you downloaded from above load the scatter file which we created
3.Preparing the ROm :
Click on the button ADD. Double click on the line and save the ROM.
#Things To notice: The filename Will be like "ROM_#". in your case probably it'll be ROM_0.
#Remember the path of the File. U'll use this file later.
Alfter Clicking Save a new Window will appear named as "Read Back Block Start Address"
Windows Settings Will be as below
Type: Hex
Read Method:Read Page Only
Start Address: 0x0000000000000000
Length:0x12BA0000
4.Reading the Rom :
Click on Read ROM with the phone switched off and connected to the PC
Follow these Steps Carefully.Once Rom is Created you can use it in future.On success you'll see a BIG GREEN CIRCLE embded in a message box.
5.Prepare files for FlashTool and make CWM:
Open the MTK Droid Root & Tools window which we left on 1st step.it is necessary to turn on phone and to connect it to the program. Click on To process file ROM_ from FlashTool button and choose the ROM_* file saved earlier. At successful unpacking rom it will be offered to choose CWM from similar phone. Chosen CWM it is checked on compliance to the connected phone and if ok, the CWM is created.
A new scatter file and other neccessary files are created in the backup folder in droid root program's directory.you'll need the files in the next step.
6.Download new CWM to the phone:
Start FlashTool, choose scatter in the folder created on the previous step. Remove marks from all blocks! Click on RECOVERY and we choose the file CWM in the same folder which was created on the previous step. Click Download and connect a cable to PC (phone has to be switched off) and expect the end of process.
NOTE n this step the CWM recovery block has to be marked only! Also it is necessary to use only the Download button and not to use at all the Firmware Upgrade button!
Summary of step 6:
--> Click on Scatter-loading.Select Scatter file from the backup folder.
--> Make Sure all the checkboxes are unchecked. Only Recovery should be Checked.
--> Click Exactly over Recovery.
--> It will ask you to select a file. Now select a Recovery file created in step 6. Tt must be inside backup folder named as "Recovery_###.img"
--> Click Button Download.
--> Connect SWITCHED OFF phone.
Green SYMBOL MEANS YOU ARE DONE :good:
NOTE: USE THE ADB TO ACCESS THE RECOVERY
COMMAND : adb reboot recovery
This is because the keys dont work
7. Install Superuser.
Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab
- install superuser
Voila You now have ROOT access ! enjoy ~
Any Questions Post below or Pm
Need more Devs who can contribute more to this good device .

need CWM
plz upload cwm recovery img file for lava n320.

plz upload cwm
plz upload the cwm recovery img which u created. i dont have a pc so i cant use mtk droid tools plz upload and +1 thanks for this great tut bro.

upload cwm
hey bro plz upload cwm img for my lava n320 i dont have pc i cant create without pc plz upload

GUys you cannot me this without pc i am sorry but all the ones are clearly mentioned there please have a look

[RECOVERY] TWRP 2.7.0.0 for WALTON Primo S2 (Win/Mac/Linux)

Compiled TeamWin Recovery Project (TWRP) for WALTON Primo S2 (Qualcomm MSM8228) this morning! Now with scripts to install from Windows, Mac OS X and Linux.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click here to -> DOWNLOAD
Windows
Make sure you have the drivers installed.
Download and extract the zip file linked above.
Connect your phone to you PC via USB cable, make sure USB Debugging is switched on.
Double click on the "flash-windows" (located inside the extracted folder) file.
Done!
Mac OS X
Make sure you have the drivers installed.
Download and extract the zip file linked above.
Connect your phone to you PC via USB cable, make sure USB Debugging is switched on.
Open your Terminal app, drag and drop the "flash-mac.sh" file (located inside the extracted folder) on to your terminal.
Done!
Linux
Make sure you have the drivers installed.
Download and extract the zip file linked above.
Connect your phone to you PC via USB cable, make sure USB Debugging is switched on.
Open your Terminal, drag and drop the "flash-linux.sh" file (located inside the extracted folder) on to your terminal.
Done!
Credits:
TeamWin for the Awesome TWRP Recovery project

tuxboy said:
Compiled TeamWin Recovery Project (TWRP) for WALTON Primo S2 (Qualcomm MSM8228) this morning! It's awesome!
View attachment 2695259
INSTALLATION
Download the TWRP build from here.
Power off the phone, boot into Fastboot mode by pressing Power + Volume Down.
Make sure you have Fastboot installed, and flash the image to your recovery partition with it, like this "fastboot flash recovery twrp-recovery.img" (please google to see how to flash images with fastboot, duh! learn to google mate)
Done! Now pull the battery out, put it back in. Press Power + Volume Up to boot into TWRP
Click to expand...
Click to collapse
Awesome bro any bug? :silly:

OdSazib said:
Awesome bro any bug? :silly:
Click to expand...
Click to collapse
I didn't find any yet

tuxboy said:
Compiled TeamWin Recovery Project (TWRP) for WALTON Primo S2 (Qualcomm MSM8228) this morning! It's awesome!
[/LIST]
Click to expand...
Click to collapse
That's just Amazing, I'd been working over CWM for Xolo Q1100, but can't try it :laugh:
Just tested your recovery on my Xolo Q1100, it booted but black screen, may be some driver difference so the recovery isn't working on the device properly
Just Awesome, Cheers :highfive:

A N D Y said:
That's just Amazing, I'd been working over CWM for Xolo Q1100, but can't try it :laugh:
Just tested your recovery on my Xolo Q1100, it booted but black screen, may be some driver difference so the recovery isn't working on the device properly
Just Awesome, Cheers :highfive:
Click to expand...
Click to collapse
A N D Y, did you change the zImage with the one from your stock recovery, why not try it with abootimg if you haven't done so yet?

update
any built for cm 11 ...any update.............end project.....any news?

[RECOVERY] TWRP 2.7.0.0 for Xolo Q1100 (Win/Mac/Linux)

Compiled TeamWin Recovery Project (TWRP) for Xolo Q1100 (Qualcomm MSM8228) this morning! Now with scripts to install from Windows, Mac OS X and Linux.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click here to -> DOWNLOAD
Windows
Make sure you have the drivers installed.
Download and extract the zip file linked above.
Connect your phone to you PC via USB cable, make sure USB Debugging is switched on.
Double click on the "flash-windows" (located inside the extracted folder) file.
Done!
Mac OS X
Download and extract the zip file linked above.
Connect your phone to you PC via USB cable, make sure USB Debugging is switched on.
Open your Terminal app, drag and drop the "flash-mac.sh" file (located inside the extracted folder) on to your terminal.
Done!
Linux
Make sure you have proper udev rules enabled.
Download and extract the zip file linked above.
Connect your phone to you PC via USB cable, make sure USB Debugging is switched on.
Open your Terminal, drag and drop the "flash-linux.sh" file (located inside the extracted folder) on to your terminal.
Done!
(If it shows device not found in Linux, try to kill server and re-run the script with sudo)
Credits:
A N D Y for the recovery.fstab
TeamWin for the Awesome TWRP Recovery project

tuxboy said:
Compiled TeamWin Recovery Project (TWRP) for Xolo Q1100 (Qualcomm MSM8228) this evening!
INSTALLATION
Download the TWRP build from here.
Power off the phone, boot into Fastboot mode.
Make sure you have Fastboot installed, and flash the image to your recovery partition with it, like this "fastboot flash recovery xolo-recovery.img" (please google to see how to flash images with fastboot, duh! learn to google mate)
Done! Now pull the battery out, put it back in.
Credits:
TeamWin
A N D Y
Click to expand...
Click to collapse
Voch is voch, btw credit to tumar thakar kotha bro :/

Thank You Sir!
Thank You Sir, for giving this awesome stuff to us... :crying:
You Are Awesome... :laugh:
Regards,
A N D Y

Rohan I wrote in facebook about this 3G issue.My 1st sim slot like others is giving this" ?" sometimes and now its only connecting to 2G. Whatever option I choose its selecting only the Edge option and the other options are not working. Can you find out exactly which apk is doing thia because it gets corrected if I factory reset but comes back after few days

Can we root using this recovery or still we need to use the script?

Root Celkon A225 Android Mobile and Install Touch Recovery

This Post will help you to root your Celkon A225 Android Mobile.
`
Download and install Celkon A225 Android Mobile drivers from below.
Installing Celkon A225 ADB Drivers
To install the drivers follow the below steps.
Extract the downloaded driver file to any folder you want.
1. Open Device Manger(You can open open it from control panel or from search in start menu.)
2. Right Click on your PC name and click add Legacy hardware.
3. Then choose 'Install hardware that i manually select from list(Advanced)' and click on next.
4. Select 'Show All devices' and click next. Then Click on Have disk and browse for the folder you have extracted your drivers(Choose .inf file inside the SP_Drivers_v1.4 folder).
5.Then you will get as in screenshot below.
View attachment 3229287
6. Choose 'Google ADB Device Interface' from 'Google,Inc' Manufacturer and click on next. Then the ADB driver will be installed.
7. Repeat the same procedure (steps 1-6) for other 2 google drivers and for MTP, Media Tech drivers. That's All.
You can check your ADB drivers installation by using below method.
1. Download adb from link below.
2. Extract all files and place them in C:\Windows Directory
3. Turn on USB Debugging(From Developer Options) in your Android mobile and connect to your PC with USB cable.
4. Open Command Prompt and run the below command. Then it should list your device as below. If your device is not listed indicates that drivers are not properly installed.
adb devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rooting Celkon A225
If drivers are properly installed rooting procedure is very simple. Download the 1 click rooter software from the download link below.
After Downloading the file follow below steps to root your mobile.
1. Enable USB Debugging in your Settings from Developer Options
2. Make sure you have installed properly. Now launch MTK Tools(Root Genius) that you have downloaded from above link.
3. Connect your Mobile with USB Debugging enabled and click on next. Then it will show as connected and you can see Root button if drivers were installed properly.
4.Click on Root and wait till your device gets rooted. It took around 15 minutes for my Celkon A225 Mobile.
That's All
Install Touch Recovery
By Rooting with Root Genius(MTK tools) you will get a custom recovery in Chinese language. So I will recommend to install Carliv Touch Recovery(CTR) to make your recovery to look ultra modern. With this one you can navigate from touch in Recovery Mode.
Download and install CTR from link below.
Follow the Below steps to install touch recovery. Do not disconnect your mobile while installation is in progress.
1. Extract the archive to any folder.
2. Connect your Android mobile to PC with USB Debugging Enabled.
3. Run CTRv2.2.exe as administrator. Then it will show below message. Click OK when it shows the message(It will aumatically close if files are copied)
4. Then it will turnoff UAC and add some entries to registries as it needs some open port to access your android and update recovery from your PC. Click OK when it shows the message.
5. After that it will start porting. Make sure your android device is booted up and is connected to PC with USB Debugging enabled. Then click yes.
6. Wait for 2 minutes it will install the touch recovery automatically for you.
Now you can check your touch recovery by going to recovery mode ( use power + volume down when android is off) . That's All
Caution: Rooting/ Recovery installation is a risky process. Your Device may brick if its wrongly done. Keep your original firmware with you before going to this process to install your firmware in case if you got any problem.
Attachments
View attachment adb.zip
View attachment MTK6589_6577_w6575_V1.06.zip
View attachment CTRv2.2.zip
View attachment SP_Drivers_v1.4.zip

Hi there,
Thank you for your work/share but here isn't the right place for that. Please post your thread here:
Upgrading, Modifying and Unlocking
Good luck
Thread closed

Xolo era 2x twrp installation guide.

Hello friends. I am Neelakanta
This is the full guide for flashing twrp recovery in Xolo era 2x.
requirements:-
1-PC(windows7 or 8 or 10)
2-Xolo era 2x
3-USB cable which supports media transfer.
4-A little working brain.
Guide to unlock bootloader:-
If you have a windows 8 or 10,then you have to disable driver signature,you can find in YouTube how to disable driver signature in windows 8 or 10.
If you have windows 7, then you can skip this.
1:First download 15 sec adb installer version 1.3(download link at end of post) in PC and install it..
2:Now open the 15 sec adb installer and press Y to all.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
][/IMG]
3:Then you will see a folder named 'adb' in local disk(c or in (d.open the folder.
4:Hold shift+Right click in mouse,Now open cmd prompt.
5:Turn on the USB debugging and OEM unlock in developer options in android.
6:connect the phone to PC via USB cable.
7:Enter the command- adb devices
8:Now you will get this pop up in your android allow it.
9:now enter the same command again and now you will get list of devices attached with your device of some number.
10:Now enter this command- adb reboot bootloader
11: wait until your phone enter into fastboot mode.
12:Then type this command to check the device whether it is perfectly connected or not- fastboot devices
13:Then enter this command- fastboot oem unlock
14:Then you will get a message in android to unlock bootloader,click yes.
15: now your bootloader is unlocked.
Guide to flash twrp:-
1lace the SuperSU zip in your SD card on android.
2:extract the Xolo era 2x twrp zip ( provided at end of post).
3ownload the sp flash tool for your windows version and install it.
4: Then download the Mtk drivers and install it ( you can find many videos on how to install Mtk drivers manually)
5:Then Launch Sp flash tool.( Refer a video to how to use sp flash tool if you don't know how to use it)
6:Then select the load scatter and select the scatter file.(ensure that scatter file recovery IMG file are in a same folder and no other file with in the folder)
7:Then switch off your phone and remove the battery.
8:Connect your phone to PC with USB cable.
9:Then click on download button in sp flash tool.
10: Now put the battery and enter into recovery mode by pressing and holding volume up and power at a time(I am not sure about vol up or down,try vol down if up doesnt work)(Twrp has inverted display and touch but you can use it by assuming corners)
11:And flash SuperSU zip( Don't turn on the phone after flashing if you turn it on you have to flash again and you have must flash SuperSU zip)
Sorry for my bad english
Xolo era 2x twrp zip link:- https://drive.google.com/file/d/1OqfTZ4zH5KqJett9oefaUGL0NQnBpqfK/view
15 sec adb installer:- https://drive.google.com/file/d/0B0MKgCbUM0itSUhpUklCTFpzWkE/view

bro i have fallowed the steps but my phone got stuck on fast boot mode how can i fix it (i used adb-setup-1.4-exe)

this is a duplicate thread for my work.. atleast give me credits..
here....
https://forum.xda-developers.com/android/development/root-xolo-era2x-root-100-install-twrp-t3667149