This Post will help you to root your Celkon A225 Android Mobile.
`
Download and install Celkon A225 Android Mobile drivers from below.
Installing Celkon A225 ADB Drivers
To install the drivers follow the below steps.
Extract the downloaded driver file to any folder you want.
1. Open Device Manger(You can open open it from control panel or from search in start menu.)
2. Right Click on your PC name and click add Legacy hardware.
3. Then choose 'Install hardware that i manually select from list(Advanced)' and click on next.
4. Select 'Show All devices' and click next. Then Click on Have disk and browse for the folder you have extracted your drivers(Choose .inf file inside the SP_Drivers_v1.4 folder).
5.Then you will get as in screenshot below.
View attachment 3229287
6. Choose 'Google ADB Device Interface' from 'Google,Inc' Manufacturer and click on next. Then the ADB driver will be installed.
7. Repeat the same procedure (steps 1-6) for other 2 google drivers and for MTP, Media Tech drivers. That's All.
You can check your ADB drivers installation by using below method.
1. Download adb from link below.
2. Extract all files and place them in C:\Windows Directory
3. Turn on USB Debugging(From Developer Options) in your Android mobile and connect to your PC with USB cable.
4. Open Command Prompt and run the below command. Then it should list your device as below. If your device is not listed indicates that drivers are not properly installed.
adb devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rooting Celkon A225
If drivers are properly installed rooting procedure is very simple. Download the 1 click rooter software from the download link below.
After Downloading the file follow below steps to root your mobile.
1. Enable USB Debugging in your Settings from Developer Options
2. Make sure you have installed properly. Now launch MTK Tools(Root Genius) that you have downloaded from above link.
3. Connect your Mobile with USB Debugging enabled and click on next. Then it will show as connected and you can see Root button if drivers were installed properly.
4.Click on Root and wait till your device gets rooted. It took around 15 minutes for my Celkon A225 Mobile.
That's All
Install Touch Recovery
By Rooting with Root Genius(MTK tools) you will get a custom recovery in Chinese language. So I will recommend to install Carliv Touch Recovery(CTR) to make your recovery to look ultra modern. With this one you can navigate from touch in Recovery Mode.
Download and install CTR from link below.
Follow the Below steps to install touch recovery. Do not disconnect your mobile while installation is in progress.
1. Extract the archive to any folder.
2. Connect your Android mobile to PC with USB Debugging Enabled.
3. Run CTRv2.2.exe as administrator. Then it will show below message. Click OK when it shows the message(It will aumatically close if files are copied)
4. Then it will turnoff UAC and add some entries to registries as it needs some open port to access your android and update recovery from your PC. Click OK when it shows the message.
5. After that it will start porting. Make sure your android device is booted up and is connected to PC with USB Debugging enabled. Then click yes.
6. Wait for 2 minutes it will install the touch recovery automatically for you.
Now you can check your touch recovery by going to recovery mode ( use power + volume down when android is off) . That's All
Caution: Rooting/ Recovery installation is a risky process. Your Device may brick if its wrongly done. Keep your original firmware with you before going to this process to install your firmware in case if you got any problem.
Attachments
View attachment adb.zip
View attachment MTK6589_6577_w6575_V1.06.zip
View attachment CTRv2.2.zip
View attachment SP_Drivers_v1.4.zip
Hi there,
Thank you for your work/share but here isn't the right place for that. Please post your thread here:
Upgrading, Modifying and Unlocking
Good luck
Thread closed
Related
Helo XDA..
this time I would like to share to all of you a tools that called MHF(Mini Handy Flashtool)
this tools made to Flash/Restore your backups of System/data/hidden partitions of your phone, it just like Fastboot restore with more UF UI. :good:
this is made by Andrewidya so thanks to him. :good:
oke lets start.
1. Download MHF in the attachment bellow
2. Install MHF
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Open MHF from folder inside you installed MHF
4. Begin MHF
5. Choose which partition in partition box and choose the backup partition in browse box (this chase i choose to restore my system backup)
6. Check USB Debugging mode in your phone and connect your phone to PC
7. Click Bootloader mode to change your phone into Bootloader mode
8. When your phone ready to flash(in bootloader screen) then klik start flash and choose OK
9. Wait the proccess till there is a twice done(see the pic), click Boot Phone Up
10. Thats it! you may exit
:highfive:
View attachment MHFSetup.zip
USB mode not working
i flashed my Fire xt 530 with Ice_Cream_Jelly-V2 by aweosomeabhijeet. And now when i'm trying to flash any other ROM the phn is not being detected by my Computer. Its only getting charged when m connecting it with the PC. USB debugging or even Mass storages also does not work. Pls help....:crying:
I've even tried debricking it !! Pls help
Same for me tooo. My phone is not detected by pc... What should i do...
Sent from my GT-S5360 using xda app-developers app
please try to update your driver. download Motorola Device Manager.
Problem: NO Bootloader
zhalx said:
Helo XDA..
this time I would like to share to all of you a tools that called MHF(Mini Handy Flashtool)
this tools made to Flash/Restore your backups of System/data/hidden partitions of your phone, it just like Fastboot restore with more UF UI. :good:
this is made by Andrewidya so thanks to him. :good:
oke lets start.
1. Download MHF in the attachment bellow
2. Install MHF
3. Open MHF from folder inside you installed MHF
4. Begin MHF
5. Choose which partition in partition box and choose the backup partition in browse box (this chase i choose to restore my system backup)
6. Check USB Debugging mode in your phone and connect your phone to PC
7. Click Bootloader mode to change your phone into Bootloader mode
8. When your phone ready to flash(in bootloader screen) then klik start flash and choose OK
9. Wait the proccess till there is a twice done(see the pic), click Boot Phone Up
10. Thats it! you may exit
:highfive:
View attachment 1873322
Click to expand...
Click to collapse
AS per ur instructions i did the same...flash spain rom root then cwm installed..then when i open MHF there is no starting adb server and then when i press bootloader mode nothing happens...i even pressd camera button+vol down+power please help...
pg4 said:
AS per ur instructions i did the same...flash spain rom root then cwm installed..then when i open MHF there is no starting adb server and then when i press bootloader mode nothing happens...i even pressd camera button+vol down+power please help...
Click to expand...
Click to collapse
Download MOTOROLA DEVICE MANAGER first, install it on your pc. then please retry.
Install Drivers for your mobile using PDANET
Click to expand...
Click to collapse
Download Pdanet from this link
Double click the file you just downloaded.
Don't connect your device until I say that!
Continue through the installation by pressing next , until a popup appears about drivers
If it asks you to uninstall previously installed drivers do it otherwise it will overwrite them
Now select phone as others as shown and select ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A warning appears like this . select install anyway
Now connect your mobile via usb cable and follow the instructions it should install drivers automatically
If the drivers installed correctly your device manager on pc should look like this
If everything went well proceed to rooting
Root Your CELKON A98 with Bin4ry rooting tool
Click to expand...
Click to collapse
Steps for Rooting :
1. Enable USB debugging on your device.
2. Go to Settings-- > Development-- > USB debugging check it.
3. Connect your device using storage mode to PC & Install driver.
4. Change phone connection to Media device.
5. Download bin4ary root tool from here
6. Unzip Bin4ry the root tool.It should contain these files
7. Run RunMe.bat file (Do notn Run as Administrator)
8. A command prompt will appear in green color like this
9. Now enter your choice
1 for normal mode
2 for special mode
X for unrooting
10. Since we are rooting enter your choice as 1
11. Follow the instruction on the cmd and click restore on your phone when prompted
12. Now your Phone should be rooted and you should be able to see Superuser app in your applist
13. If the above method didn't work try selecting choice as 2(special) in step 10
Check whether your phone is rooted
Click to expand...
Click to collapse
1. Download Root Checker app and check whether your phone is rooted
2. If it is rooted it should show status as ROOTED
HIt thanks :good: if you find this tutorial useful
Credits :
Bin4ary for his wonderful Rooting Tool .
Sandeep Kiran for letting me running experiments on his celkon a98 mobile
Click to expand...
Click to collapse
Caution : I am not responsible for any damages done to your phone through this guide . Use at your own will . But this is a tested tutorial on my friend's device . So not to worry much
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LATEST SAMSUNG USB DRIVERS FOR MOBILE PHONES 1.5.29.0
FOR WINDOWS 8 / 7 / Vista / XP / x86 (32 bit) & x64 (64 bit)
installable via "setup.exe" OR via "have disk" method
AND
LATEST ADB & FASTBOOT TOOLS (.exe files)
ADB & Fastboot unpacked from Android SDK
<<< DOWNLOAD LINKS BELOW! >>>
INFO:
This driver works on Win 8 & 7 & Vista & XP, 32 and 64 bit and allows you to use Odin, ADB and Fastboot tools with your phone. There's a newer driver package around the net but they are INCOMPLETE, they lack essential drivers, so they may not work on all Samsung phones.
You can also download latest Odin, ADB & Fastboot Tools below.
WHAT'S THE HASSLE:
Samsung Drivers package's installation doesn't work on Windows 8 for many people (driver installation doesn't even start), so the point is that the drivers have to be installed manually. In order to do this I unpacked Samsung Drivers package .exe file so that the drivers can be installed via "have disk" method. I used these drivers succesfully in Windows 8 Enterprise x64 to connect my SGS i9000 to ODIN. Odin sees the phone and can flash firmware, reformat partitions etc.
You need INSTALLER. If it won't work for you, try RAR ARCHIVE then.
SAMSUNG USB DRIVERS 1.5.29.0 INSTALLER: Mod edit: links removed
SAMSUNG USB DRIVERS 1.5.29.0 RAR ARCHIVE : Mod edit: links removed
ADB & FASTBOOT TOOLS (.exe files): Mod edit: links removed
Click to expand...
Click to collapse
INSTALLATION 1:
1. Download the driver INSTALLER.
2. Uninstall previous Samsung USB drivers from "Programs And Features" and "Device Manager".
3. Run the installer "USB_Drivers_1.5.29.0.exe" and proceed with the installation steps, finish the installation and restart your computer.
4. Connect it to your computer via USB cable.
5. If your phone is still not correctly recognized by Odin and the driver installer finished installation successfully - skip the 2nd method and use the 3rd. If drivers didn't install correctly (e.g. the installer failed to launch or failed to finish installation) - try the 2nd method first.
INSTALLATION 2:
1. Download the driver RAR ARCHIVE.
2. Uninstall previous Samsung USB drivers from "Programs And Features" and "Device Manager".
3. Unpack USB_Drivers_1.5.29.0.rar to some location, eg. C:\.
4. Run the installer from "C:\USB_Drivers\SAMSUNG_USB_Driver_for_Mobile_Phones\setup.exe" and proceed with the installation steps, finish the installation and restart your computer.
5. Switch your Samsung phone into download mode (i9000: power it on with Power + Vol UP + Home pressed simultanously).
6. Connect it to your computer via USB cable.
7. If your phone is still not correctly recognized by Odin - try the 3rd method.
INSTALLATION 3:
0. This is the "have disk" method. You have to follow every step in this guide
1. Download the driver RAR ARCHIVE.
2. Uninstall previous Samsung USB drivers from "Programs And Features" and "Device Manager".
3. Unpack "USB_Drivers.rar to some location, eg. C:\.
4. Switch your Samsung phone into download mode (i9000: power it on with Power + Vol UP + Home pressed simultanously).
5. Connect it to your computer via USB cable.
6. Your phone should become discovered by Windows as some device. In my case, Windows has found my SGS i9000 as a "Gadget Serial" device.
7. Go to Windows Device Manager. Right click on the device your phone has been discovered as (eg. "Gadget Serial" in my case) and choose "Update driver" option from the context menu.
8. Choose "Search my Computer...", check "Include subfolders" option and point the updater to the folder where you've had unpacked the drivers .rar archive to, eg. C:\USB_Drivers.
9. The driver should install automatically.
10. It may happen that after the installation some new "unknown device" ("Samsung Modem" in my case) would appear in the Device Manager. Complete 7 & 8 step for that device and any other new device that may appear afterwards.
11. Restart your computer.
12. Done!
Hello friends. I am Neelakanta
This is the full guide for flashing twrp recovery in Xolo era 2x.
requirements:-
1-PC(windows7 or 8 or 10)
2-Xolo era 2x
3-USB cable which supports media transfer.
4-A little working brain.
Guide to unlock bootloader:-
If you have a windows 8 or 10,then you have to disable driver signature,you can find in YouTube how to disable driver signature in windows 8 or 10.
If you have windows 7, then you can skip this.
1:First download 15 sec adb installer version 1.3(download link at end of post) in PC and install it..
2:Now open the 15 sec adb installer and press Y to all.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
][/IMG]
3:Then you will see a folder named 'adb' in local disk(c or in (d.open the folder.
4:Hold shift+Right click in mouse,Now open cmd prompt.
5:Turn on the USB debugging and OEM unlock in developer options in android.
6:connect the phone to PC via USB cable.
7:Enter the command- adb devices
8:Now you will get this pop up in your android allow it.
9:now enter the same command again and now you will get list of devices attached with your device of some number.
10:Now enter this command- adb reboot bootloader
11: wait until your phone enter into fastboot mode.
12:Then type this command to check the device whether it is perfectly connected or not- fastboot devices
13:Then enter this command- fastboot oem unlock
14:Then you will get a message in android to unlock bootloader,click yes.
15: now your bootloader is unlocked.
Guide to flash twrp:-
1lace the SuperSU zip in your SD card on android.
2:extract the Xolo era 2x twrp zip ( provided at end of post).
3ownload the sp flash tool for your windows version and install it.
4: Then download the Mtk drivers and install it ( you can find many videos on how to install Mtk drivers manually)
5:Then Launch Sp flash tool.( Refer a video to how to use sp flash tool if you don't know how to use it)
6:Then select the load scatter and select the scatter file.(ensure that scatter file recovery IMG file are in a same folder and no other file with in the folder)
7:Then switch off your phone and remove the battery.
8:Connect your phone to PC with USB cable.
9:Then click on download button in sp flash tool.
10: Now put the battery and enter into recovery mode by pressing and holding volume up and power at a time(I am not sure about vol up or down,try vol down if up doesnt work)(Twrp has inverted display and touch but you can use it by assuming corners)
11:And flash SuperSU zip( Don't turn on the phone after flashing if you turn it on you have to flash again and you have must flash SuperSU zip)
Sorry for my bad english
Xolo era 2x twrp zip link:- https://drive.google.com/file/d/1OqfTZ4zH5KqJett9oefaUGL0NQnBpqfK/view
15 sec adb installer:- https://drive.google.com/file/d/0B0MKgCbUM0itSUhpUklCTFpzWkE/view
bro i have fallowed the steps but my phone got stuck on fast boot mode how can i fix it (i used adb-setup-1.4-exe)
this is a duplicate thread for my work.. atleast give me credits..
here....
https://forum.xda-developers.com/android/development/root-xolo-era2x-root-100-install-twrp-t3667149
There are many tutorials online showing installation of stock firmware fro Canvas Infinity, but none of them are accurate and causes many errors on following them. So, I experimented and was successful at last. So, here is the tutorial to install stock firmware in Canvas Infinity.
Required Files:
1) QPST Flash tool - Download Link
2) Qualcomm Drivers - Download Link
3) ADB - View attachment ADB_INSTALL.zip
4) Canvas Infinity Stock Firmware - Download Link
Micromax_HS2_SW_V5_HW_V1.0_08042017_QFIL.zip - Link 1
Micromax_HS2_SW_V6_HW_V1.0_08292017_QFIL.zip - Link 1 - Link 2
Follow these steps:
1) Install QPST FLash tool from the link.
2) Install Qualcomm drivers.
3) Unzip the firmware and copy the firmware to "C:\Program Files\QPST\bin" folder.
4) Open the QFIL.exe in the same bin folder and run it as administrator.
5) Choose the flat build.
6) Then it will automatically choose all files from the firmware folder like below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Now, enter your phone into EDL mode. There two methods to go into EDL (Emergency Download) mode.
Don't turn off the phone. Enable USB Debugging. Connect the phone to the PC. Start cmd in the ADB folder and enter command "adb reboot edl". And the notification LED will start blinking.
Turn off your phone. Press Volume UP and Volume Down button together. Hold them and connect the phone to PC using USB and immediately press power for 3 seconds. And the notification LED will start blinking.
8) If you see "Qualcomm HS-USB QDLoader 9008 (COM _ )" on the top then immediately press the download button. Don't press the download button unless it is "Qualcomm HS-USB QDLoader 9008".
9) On finishing it will show a success message. Then disconnect your phone and reboot.
I hope this tutorial will be helpful.
If the following errors occur:
1) If USB not recognized and descriptor failed then try going to EDL mode using ADB.
It's not working for me
I do this process many time , but it's not working always it shows something "sahara failed" ,
Can anybody give me a stock rom zip that could be installed from CWM /TWRP , or PREVIOUSLY BACKED UP ROM ...
Can i install this zip file via TWRP
I'm newbie ,plz tell me,can i flash this zip file using TWRP recovery, or i hv to use kitchen-Android whatever to make a twrp flashable zip...
Micromax Canvas infinity H2S any custom rom available?