I flashed the MIUI Rom after increasing system partition. Everything works fine but after I lock the screen, I cannot turn on the screen again!! Pressing the power button on lights up the 3 buttons below and even the Touch works as I can hear sounds after I touch the screen, but screen is totally off. I was previously in stock V2 Rom! Please help!!!
SuchoX said:
I flashed the MIUI Rom after increasing system partition. Everything works fine but after I lock the screen, I cannot turn on the screen again!! Pressing the power button on lights up the 3 buttons below and even the Touch works as I can hear sounds after I touch the screen, but screen is totally off. I was previously in stock V2 Rom! Please help!!!
Click to expand...
Click to collapse
Flash uboot of stock v1 by sp tools. It will solve the issue.
Sent from my Micromax A110Q using Tapatalk
Solution To this
SuchoX said:
I flashed the MIUI Rom after increasing system partition. Everything works fine but after I lock the screen, I cannot turn on the screen again!! Pressing the power button on lights up the 3 buttons below and even the Touch works as I can hear sounds after I touch the screen, but screen is totally off. I was previously in stock V2 Rom! Please help!!!
Click to expand...
Click to collapse
You can either switch back to v1 then flash the rom or you can go to this link http://forum.xda-developers.com/mic...tom-rom-xperia-fusion-micromax-a110q-t2563484 and take a look at notice 1
P.S Flashing v1 then the rom is much better and simple
Here is the link to v1 to flash from cwm
www.droidarena.in/Thread-Stock-ROM-v1-CWM-Flashable-ZIP-for-Micromax-Canvas-2-Plus-A110Q
Both are not my work
Not working
vneogi199 said:
Flash uboot of stock v1 by sp tools. It will solve the issue.
Sent from my Micromax A110Q using Tapatalk
Click to expand...
Click to collapse
Flashed the V1 ROM first, then flashed MIUI rom, still problem persists. Then with the MIUI rom flashed, I tried the SP tools process. I put the preloader, scatter file and recovery.img in the same folder and selected the scatter file. I checked only UBOOT and then clicking in download button shows a window saying [HINT]UBOOT is checked, but without path! I had installed Drivers when i first rooted my phone from stock v2 rom.
SuchoX said:
Flashed the V1 ROM first, then flashed MIUI rom, still problem persists. Then with the MIUI rom flashed, I tried the SP tools process. I put the preloader, scatter file and recovery.img in the same folder and selected the scatter file. I checked only UBOOT and then clicking in download button shows a window saying [HINT]UBOOT is checked, but without path! I had installed Drivers when i first rooted my phone from stock v2 rom.
Click to expand...
Click to collapse
Try flashing this file with cwm recovery and report if it worked.
http://d-h.st/NVO
Still problem
I installed the zip from cwm recovery....But still the problem persists!!! I even flashed the uboot.bin file from sp-tools, But still no luck!
SuchoX said:
I installed the zip from cwm recovery....But still the problem persists!!! I even flashed the uboot.bin file from sp-tools, But still no luck!
Click to expand...
Click to collapse
Maybe you should ask the devs to fix it and switch to another rom till then:laugh::laugh:
Solved!!
Problem solved!!!!!..... I Flashed the uboot file of stock V1 using sp tools. Actually the problem was that the Stock V1 rom i downloaded was not SP tools flashable. Sp couldn't find the scatter file. Thank You so Much!!!!....Using Color Os v1.2 :laugh:
Related
Hello All,
I have updated my MMX 110 ICS to JB. Before updating I have had CWM installed and the phone was rooted. After I Updated to JB I had network issues so I unrooted the phone. Once the network issue was fixed I have tried to root the phone and or install the CWM I never had any success till date. Below given is the list of things I tried:
1. Flashing Recovery.img via recovery mode (CWM recovery image)
2. Flashing recovery.img via recovery mode (Stock Recovery Image)
3. Updated SuperUser rar file form SD card
4. Bin4ry V17 - After the restore process is done and the phone shuts down it never turns back up - I have to manually reset the batter to turn the phone on.
Please suggest a way to either take the phone back to Stock recovery of ICS or root this MMX with JB 4.1.1.
FYI I am not sound with Android devices. I am good with computers and symbian devices.
Regards
HARI
do it with sp flash tool.
Hello,
I have already tried spflash tool to flash the recovery image and cwm. That did not work. I tried to flash the jb 4.1.1 stock ROM that worked but still I am unable to root.
Sent from my Micromax A110 using xda app-developers app
check this out.
http://forum.xda-developers.com/showthread.php?t=2201703
don't forget to hit thanxxxxxxx
hari615 said:
Hello,
I have already tried spflash tool to flash the recovery image and cwm. That did not work. I tried to flash the jb 4.1.1 stock ROM that worked but still I am unable to root.
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
You have to get cwm <recovery.img> then paste it in the folder having actual recory.img stock image. Replace it with cwm. Now using flash tool just select scatter file and the recovery.img uncheck all other options yhen click download. Wait and reboot. Then place supersu.zip in mmc. Now shutdown phone and start pressing power button volume up and down all together. Now u will get option of recovery mode. Now install the supersu zip.
Sent from my Micromax A110 using xda app-developers app
Hi,
I tried to install CWM recovery in my A110 which is upgraded to stock V3 JB rom.i did all thing as per the guidelines for installing CWM recovery.SP flash tool showed Download is successfull.however i cant Boot in to CWM mode by pressing Power key,Vol+ and Vol-.instead screen just blinking two times and nothing will happens,somebody pls help.i am a newcomer
mailli 620
sushakps said:
Hi,
I tried to install CWM recovery in my A110 which is upgraded to stock V3 JB rom.i did all thing as per the guidelines for installing CWM recovery.SP flash tool showed Download is successfull.however i cant Boot in to CWM mode by pressing Power key,Vol+ and Vol-.instead screen just blinking two times and nothing will happens,somebody pls help.i am a newcomer
Click to expand...
Click to collapse
Bro mine only work in second time
The first time i flash, it no work, but the second all good
claudi82 said:
Bro mine only work in second time
The first time i flash, it no work, but the second all good
Click to expand...
Click to collapse
Bro,
Actually CWM is working with my device,i had installed Quick Boot on my device and by selecting recovery,phone restarts and goes to Recovery,but this not happens with the keypress,this is the prob.
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
ibshar said:
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
Click to expand...
Click to collapse
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Then you need to flash the stock ROM with SP Flash tool
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Yes..u can flash through SP tool as said by @IBashar..in case..if u dont want to flash through SP tools..I will suggest u to use someone else SD card & paste ur rom in that & then flash through recovery..as I personally feel that flashing through SP Tool is quite cumbursome..
HIT THANKS IF I HELPED U
Sent from my JMP V13 using xda app-developers app
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Don't worry bro! Try to boot into CWM again because it should be there. Then try to flash the ROM again...
And remember, in future, always take a Nandroid backup before you install anything, mod or ROM. It really helps in case something goes wrong and phone stops working,
ibshar said:
Then you need to flash the stock ROM with SP Flash tool
Click to expand...
Click to collapse
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
None of the tools will work unless you install the correct Drivers.. So install teh drivers that are given in the SP Flash tool thread and then try.
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
I Also Face The Problem With SP Tools 0% Problem Take Out The USB Cable And Insert It Again And After 30-40 Seconds It Will Show The Process Completed 100% And Green Ring Will Be There
Sent from my Micromax A110 (Canvas 2) using xda premium
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
see the video below
non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro
Xperia Rom
Pakistan Baseband
Note: do backup before flash.......
1.Place it in sd card
2.wipe data reset
3.flash rom
4.flash pakistan baseband zip
5. enjoy..........
Camera Autofocus Fix
-Download libcameracustom.zip from attachements
-extract it and copy to system/lib/[here]
-flash modified rom
No bugs so far.......
Credits also goes to incpak as i have just ported it they made it....
Don't forget to click thanks button
Post a link to the original site from where you got this. Secondly add more information about the ROM you have not described the ROM in any way. Also post screenshots of it.
Regards,
RaHBeR
i have ported this from incpak noir a20 rom....
For more info and screenshots go to this site
http://www.incpak.com/tech/xperia-rom-qmobile-noir-a500/
hamsam said:
i have ported this from incpak noir a20 rom....
For more info and screenshots go to this site
http://www.incpak.com/tech/xperia-rom-qmobile-noir-a500/
Click to expand...
Click to collapse
You have ported this? That is you have changed this ROM?
Then give details of all the changes in this ROM that you made and also the differences between this ROM and the Stock ROM.
These all data along with screenshots should be in your first post.
Regards,
RaHBeR
Screen shot added..............
camera resolution problem...
Oops ,, deleted
xedi95 said:
Oops ,, deleted
Click to expand...
Click to collapse
???
Nice Work!
The file size is tooo big! +400MB well anyways i will definitely try it and share my views regarding this ROM!
more details should be added regarding the ROM! :angel:
Works on Walton Primo G3??
esarve said:
Works on Walton Primo G3??
Click to expand...
Click to collapse
it will work just replace boot.img with stock one as this user did on this page post 1
http://forum.xda-developers.com/showthread.php?t=2475234&page=2
hamsam said:
it will work just replace boot.img with stock one as this user did on this page post 1
http://forum.xda-developers.com/showthread.php?t=2475234&page=2
Click to expand...
Click to collapse
YEah i tried yesterday it worked
I flashed this rom today, but badly stuck. help
hamsam said:
Xperia Rom
Pakistan Baseband
Note: do backup before flash.......
1.Place it in sd card
2.wipe data reset
3.flash rom
4.flash pakistan baseband zip
5. enjoy..........
Camera Autofocus Fix
-Download libcameracustom.zip from attachements
-extract it and copy to system/lib/[here]
-flash modified rom
No bugs so far.......
Credits also goes to incpak as i have just ported it they made it....
Don't forget to click thanks button
Click to expand...
Click to collapse
I flashed this rom on qmobile a500 of my friend, flashed successfully, rebooted without letting me do three wipes of cache dalvik and factory. Mobile rebooted but fc on intial boot setup and I can not get past to it, thid is not it, but the worst of all is that I can not boot into cwm
Recovery to flash any other rom... initial setup app doesnot close by any means.. I can pull now notification bar, have to settings..
Please help... please help. Guide my another rom or help me boot into recovery.. one more thing does qmobile a500 support twrp recovery... becaise I manage to install flashify app from play store somehow... this app let's me flash rom by using twrp recovery... waiting for some ecpertly reply very badly.....
affineer said:
I flashed this rom on qmobile a500 of my friend, flashed successfully, rebooted without letting me do three wipes of cache dalvik and factory. Mobile rebooted but fc on intial boot setup and I can not get past to it, thid is not it, but the worst of all is that I can not boot into cwm
Recovery to flash any other rom... initial setup app doesnot close by any means.. I can pull now notification bar, have to settings..
Please help... please help. Guide my another rom or help me boot into recovery.. one more thing does qmobile a500 support twrp recovery... becaise I manage to install flashify app from play store somehow... this app let's me flash rom by using twrp recovery... waiting for some ecpertly reply very badly.....
Click to expand...
Click to collapse
Install mobile uncle tool and download cwm recovery from incpak.com for a500..place recovery on root of sd card and flash it through mobile uncle tools....
Sent from my A500 using Tapatalk
tried but device could not to recovery
hamsam said:
Install mobile uncle tool and download cwm recovery from incpak.com for a500..place recovery on root of sd card and flash it through mobile uncle tools....
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
installled mobile uncle and flashed said recovery from incpak, after installing recovery mobile uncle prompted me to reboot, i chose yes. but failed to boot into recovery, then it mobile booted normally..
so i tried to install stock a500 recovery... it is stuck at bootloop... only q mobile boot animation not normal boot, no recovery....
i tried to install bootimg using sp flash tool but gave error 8032... i have installed vcom usb drivers correctly......... please help
sp flash working now..
affineer said:
installled mobile uncle and flashed said recovery from incpak, after installing recovery mobile uncle prompted me to reboot, i chose yes. but failed to boot into recovery, then it mobile booted normally..
so i tried to install stock a500 recovery... it is stuck at bootloop... only q mobile boot animation not normal boot, no recovery....
i tried to install bootimg using sp flash tool but gave error 8032... i have installed vcom usb drivers correctly......... please help
Click to expand...
Click to collapse
recovery flashed but not booting to recovery nor normally... qmobile official logo all time long................ help.
maybe recovery is bad, can you provide working recovery img file. thanks
affineer said:
recovery flashed but not booting to recovery nor normally... qmobile official logo all time long................ help.
maybe recovery is bad, can you provide working recovery img file. thanks
Click to expand...
Click to collapse
If Rom not booting also did recovery then read this post
http://www.incpak.net/showthread.php?p=556
Sent from my A500 using Tapatalk
perfomed format whole flash, now black screen
hamsam said:
If Rom not booting also did recovery then read this post
http://www.incpak.net/showthread.php?p=556
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
after performing format whole flash, i flashed bootimg and recovery supplied in a,zip.. nothing on screen now. sp flash reported success in flashing recovery and bootimg..
what else?
please help and skype
affineer said:
after performing format whole flash, i flashed bootimg and recovery supplied in a,zip.. nothing on screen now. sp flash reported success in flashing recovery and bootimg..
what else?
Click to expand...
Click to collapse
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
affineer said:
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
Click to expand...
Click to collapse
if you have formated whole flash u need to flash every thing provided in zip including preloader....Your device will boot i have tried this procedure many time and successfully booted device every time.Also one more thing choose this as scatter file "MT6589_Android_scatter_emmc_PMT.txt" and don't forget to choose and tick nvram or any other thing provided in zip...
affineer said:
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
Click to expand...
Click to collapse
f you have formated whole flash u need to flash every thing provided in zip including preloader....Your device will boot i have tried this procedure many time and successfully booted device every time.Also one more thing choose this as scatter file "MT6589_Android_scatter_emmc_PMT.txt" and don't forget to choose and tick nvram or any other thing provided in zip...
Hey,
I am using Micromax Unite 2 and i have few issues/problem
As you might know that Unite 2 came with limited internal storage for app installation, approx 800MB, with the help of some guide i found over the internet increased by flashing some scatter file and now its approx 1.7GB.
Recently i flashed CMW recovery with the help of Mobile Uncle and when i booted to recovery, the screen is upside down, means i have to hold phone in reverse direction on recovery menu.
I am planning to flash a custom ROM so i have few question like :-
Do i need to go back to original storage scenario, means again use SPFlash tool, use some scatter file and make my app storage to 800 before i flash new ROM or it will work without it?
Another question is CWM recovery menu is in upside down so do i need to fix it, if yes then how or i can use it as it is and flash my new rom.
I have also a same problem but i used carliv touch recovery instead of cwm.....
Sent from my Micromax A106
decentguy49 said:
Hey,
I am using Micromax Unite 2 and i have few issues/problem
As you might know that Unite 2 came with limited internal storage for app installation, approx 800MB, with the help of some guide i found over the internet increased by flashing some scatter file and now its approx 1.7GB.
Recently i flashed CMW recovery with the help of Mobile Uncle and when i booted to recovery, the screen is upside down, means i have to hold phone in reverse direction on recovery menu.
I am planning to flash a custom ROM so i have few question like :-
Do i need to go back to original storage scenario, means again use SPFlash tool, use some scatter file and make my app storage to 800 before i flash new ROM or it will work without it?
Another question is CWM recovery menu is in upside down so do i need to fix it, if yes then how or i can use it as it is and flash my new rom.
Click to expand...
Click to collapse
Answer 1: No need to get back. Storage doesn't matter for me. I am using 8 gb model, I flashed custom roms after i partitioned my storage and it worked fine.
Answer 2: Cwm is inverted. Nobody fixed it till now. Use CTR Recovery instead of CWM.