Database Info

[Q] LG optimus 3d p925g bricked

I've looked at the similar threads , to be honest even if one of the suggestions might work , none of the people seem to have the same problem from my understanding.
So apologize ahead of time as i imagine someone has bricked in a similar fashion in some thread buried somewhere.
But have an unlocked P925g lg optimus 3d, got a few days ago.
Last night i rooted just fine , root checker says it was rooted properly.
Then i installed rom manager as i was following manbearpigs post.
When i got to flash clockwork mod , i clicked the button and it looked like it was doing some flashing , but the phone turned off to reboot??
and now when i power on the lg logo appears and then the screen goes funny.
If i try to hold the power down and 3d button , i get a green screen . However i'm very unsure of what to do next.
However when i plug into usb the phone goes black , refuses to turn back on until i take the battery out.
I'd pay someone here if i could , but i'll take any help i can get.
Appreciate any help.

I don't KNOW, but just an idea:
May be your phone is stuck in download mode?
With this latest ICS (original, not ported) my phone shows black screen when in download mode (no message SW UPDATE and something in Korean).
Did you try to plug your phone to PC? Does your comp see it?
From what I read flashing wrong CWM might cause problems...
Also try to read Ressurection thread by xbsa, it helped me couple times
Don't give up!
Sent from my LG-P920 using xda app-developers app

My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.

odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
just try the LG flash tool to flash without reinstalling drivers, if it doesn't flash you have to uninstall all LG drivers, reboot your computer, install again LG drivers and flash Bin files using Flash tool, you don't have to flash Bin and fls files at the same time, first Bin file, if there is no network close LG flash, open it again and flash Fls at second time to get the right baseband (sometimes it not necessery to flash this fls files)
or just follow this guide
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html

odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
To get to download mode you need to keep battery in, remove sim and SD card. Hold vol+ and plug USB cable. You should see message SW UPDATE and some Korean. My phone now doesn't show it, just blank screen. But LG Flash sees it and u can flash bin fls.
Sent from my LG-P920 using xda app-developers app

Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.

Android1993 said:
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Click to expand...
Click to collapse
ok so i've deleted all lg related material from my computer, when i connected the phone to the computer with battery in , nothing happens.
Without battery , it detects automatically , then it continues a loop of picking it up and dropping off .
So i moved to my laptop , attempted to follow the guide kupuku posted, however after getting the went logo on the phone , it never gets past that stage no matter what i do.
I've also tried LG support tool , it doesn't detect my phone on either my computer or laptop , even after installing/reinstalling the proper drivers.
LG does have a live chat which isn't open and the phone number can not be reached from my area.. i imagine its a 1800 number for asia or something as i do live in Canada.
My only other choice is to take the phone down to a guy that can get it out of boot loop for close to what i paided for the phone a few days ago.
Least to say , that option is something i want to do , nor can i afford to do.
once again i apprecaite the help that has been given , and for any that will be given.
edit:
Ok so i got lg mobile support to work by doing recovery and entering my imei number. Its currently at 4% but its been close to an hour and a half. Might restart and see if that works , but my phone is doing the logo boot repeat pattern still , even during this update. so not sure what exactly is happening.

[Q] LGMDP.exe doesn't shows my phone?

Hello,
i have a problem, i need to flash baseband ( http://forum.xda-developers.com/showthread.php?t=1149530 ) on my LG.
But LGMDP.exe doesn't shows my phone on Select port. But ONLY LGMDP.exe. I have usb debugging enabled.
So what can I do that it shows my phone, so I finally can flash baseband?
Hope you can help me fast.
Thanks.
Yours sincerely,
LegendZz

Have you installed LG Drivers
Sent from my GT-I9082 using xda premium

Yes, I have installed LG Drivers, PC Suite and so on, but dont work

Have you disabled lg modem from control panel>properties in your PC? After disabling, reboot PC & then connect phone.
Sent from my LG-P500

pmvyas said:
Have you disabled lg modem from control panel>properties in your PC? After disabling, reboot PC & then connect phone.
Sent from my LG-P500
Click to expand...
Click to collapse
Yes I have, but still don't work
Now I tried to install Gingerbread 2.3.3 official with KDZ Updater, but also this one says ' PHONE WAS NOT FOUND '

LegendZz said:
Yes I have, but still don't work
Now I tried to install Gingerbread 2.3.3 official with KDZ Updater, but also this one says ' PHONE WAS NOT FOUND '
Click to expand...
Click to collapse
for people, like me also, that LGMDP doesn't show device, you need to have installed LG drivers, disabled LG modem from device manager, reboot into recovery, conect phone to pc, go to advance/mounts and mount USB, that shoud make LGMDP show the device(maybe it will take some little time to detect it and instal drivers), from LGMDP select country and language, carrier, phone model and shoud see if there are updates for it and install them and after all is done reboot
AND DO NOT TRY TO UPDATE TROUGH KDZ BECAUSE ALOT OF PEOPLE HAD HARDBRICKED THEYR PHONES (USING KDZ IS NOT FOR EVERYBODY), ONLY USE LGMDP,
AN IF YOU EVENTUALY USED KDZ AND GAVE YOU ERROR, DO NOT PULL OUT BATTERY, JUST RETRY AGAIN UNTILL IS ALL DONE OK,
IF ALSO, YOU WILL NEED TO GET YOUR DEVICE TO THE REPAIR SHOP AND THAT IS NOT FOR FREE, OR IN THE WORST CASE YOU WILL NEED A NEW PHONE

[Q] please soo stuck

ive rooted an flashed my lg optimus 3d there only one rom that works as all the other roms just keep restarting the phone. i think because i didnt update to ics or something to do with baseband im not sure,i was on gb and still am, iv tried various methods of trying to restore my phone to stock so i can start again but i crnt update the omap drivers as device manager is flashing on and off and when i get chance its says parameter is incorrect, anyhelp to restore or get my phone to ics would be much appreciated please please

For custom ICS ROMs, yes, you have to first install 'regular' ICS. For that as well as driver install:
http://forum.xda-developers.com/showthread.php?t=2195753
Then you can install any custom ROM based on ICS.
You should be logged onto pc as administrator...

hey thanks for the reply i have done all that but the omap driver just wouldnt intall or connect, iive tried a few methods but they dont seem to be working dont know if its through sheer tiredness or now impaitience to get it done but ive now complety baffled myself as im stuck with android guy with a red triangle on boot screen no recovery or anything, not sure where to go from here even to get it back to stock

As described there when it is blinking in device manager you will need to quickly right click on it when it appears then force install it.

drastic00 said:
As described there when it is blinking in device manager you will need to quickly right click on it when it appears then force install it.
Click to expand...
Click to collapse
i did try that that but its keeps disconecting and says parameter not found or error i dont know if it is that it disconncting or a problem with my laptop or phone connector but i shall give it another go, thanks

Use official lg tool, and choose emergency restore, this will flash the newest official ics.
Hope it works
Sent from my LG-P920 using xda app-developers app

no i crnt use the lg tool it says that my phone isnt connected

look
amanda87 said:
ive rooted an flashed my lg optimus 3d there only one rom that works as all the other roms just keep restarting the phone. i think because i didnt update to ics or something to do with baseband im not sure,i was on gb and still am, iv tried various methods of trying to restore my phone to stock so i can start again but i crnt update the omap drivers as device manager is flashing on and off and when i get chance its says parameter is incorrect, anyhelp to restore or get my phone to ics would be much appreciated please please
Click to expand...
Click to collapse
you should run in windows 7 & install lg driver look in http://forum.xda-developers.com/showthread.php?t=2337545
if all above not work change your usb cable & your pc device .
and try again

hey, yea im half way there now, tried it on my other laptop running windows 7 not xp and managed to intall the omap, run the fast boot and all in one tool to install everything, not quite worked as nothing happens after fastboot and just says waiting for device but think i know how to fix that, fingers crossed

[Q] Stuck in download mode, FlashTool fails with missing model information (BRICKED?)

My LG G2 D800 (AT&T) 32 GB is stuck in download mode and I cannot flash the stock ROM to it.
I can't get out of download mode no matter how I try to press keys at boot, etc. -- just a black screen with the LG logo.
adb devices returns no devices found.
Shows in Windows Device Manager as "LGE AndroidNet USB Serial Port (COM4)."
Flash Tool finds my device, but when I try to flash (using dll C:\Users\SAdra\Downloads\LGD800_20130904_LGFLASHv160.dll and S/W LGD800AT-01-V10O-310-410-OCT-19-2013+0.tot), it fails immediately and says "Model Information Check Fail!"
It shows "IMEI : " and "Model : ". That's really scary if that information has truly disappeared (not sure how that could have happened though). I at least have the IMEI on a sticker on the back.
I used ioroot to successfully enter root mode, so I should have an EFS backup, but I don't know how to recover it since I'm in download mode and the only tool I have to work with is the LG FlashTool, which isn't happy with me right now. I've tried key combinations but I can't seem to enter recovery mode or fastboot or anything from here.
Previously I was stuck in a fastboot loop but then I re-flashed most of the stock partitions from (downloads.codefi.re 10d_partitions directory under D800 Stock_Firmware) -- I remember doing this for aboot, boot, dbi, laf, modem, recovery, and abl1 -- I was following some dumb forum post in which someone recommended doing that -- duhh...
I would be happy at this point if I could get back into my fastboot loop -- at least I could flash stuff from there.
What got me into the fastboot loop in the first place was flashing the BeanStalk ROM (it was a two-part thing where you were supposed to first flash the main ROM and then flash a device-specific patch -- well, the initial ROM flash got me into the fastboot loop).
Any recommendations? If I were to use Linux, would I have any other options -- I've seen people mention flashing partitions using dd?
At this point I'm about ready to take it in to AT&T (still under warranty / in contract) and beg for help, although I know I've obviously voided my warranty by rooting it.
I've seen a few older threads where people are stuck in download mode and have the same "model information" error in FlashTool, and it seems nobody ever replies to those threads, so I think I'm out of luck. If anybody has gone through this or has any idea what I can do, I would really appreciate the help.
Thanks,

I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks

bassist82 said:
I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks
Click to expand...
Click to collapse
did you solved it? im in same situation

Any news? Thanks

bassist82 said:
I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks
Click to expand...
Click to collapse
did you found the solution ?? same problem

I'm in the same situation. Flashed the wrong rom and now stuck at lg logo. Lg flash tool keeps erroring out with mismatch model numbers. The universal file also errors out. Anyone have a way to save it? I even hex edited the files and ended up with mismatched bin number. I feel I'm so close. Lg flash tool just keeps getting confused. Is it a full brick and a lost cause?
Sent from my SM-G900T using Tapatalk

Anybody???
Sent from my SM-G900T using XDA Free mobile app

I had the same problem quite a while ago and found that the firmware i downloaded was not the right one, downloaded 20c and related dll and it worked search for it.
Sent from my LG-D800 using XDA Free mobile app

lingarajug said:
I had the same problem quite a while ago and found that the firmware i downloaded was not the right one, downloaded 20c and related dll and it worked search for it.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the suggestion but it still didn't work. Here are pics for what's happening.
1.) It's an at&t g2.
2.) Here's the wrong ROM that was flashed. (Cloudy)
3.) This is the error I Gerry from lgflashtool. (Wrong model)
4.) If I use the alternate DLL in op post then this is the error. (Crossdll)
I just can't get it to unbrick. Any other suggestions I'm site would help a ton of other people. Thanks in advance!
Sent from my Samsung Galaxy S5 using XDA Free mobile app

In the 2nd pic it says f320l but in 3rd pic it says d801 T-Mobile and firmware version reads 20e, if it is an at&t phone there is only 20c tot and dll available now, so if u could go back to stock recovery and clean everything and then download 20c firmware and dll u should be good to go. If u still cant flash 20c firmware try 20d not 20o as it 20d is what my g2 came with first.
Sent from my LG-D800 using XDA Free mobile app

lingarajug said:
In the 2nd pic it says f320l but in 3rd pic it says d801 T-Mobile and firmware version reads 20e, if it is an at&t phone there is only 20c tot and dll available now, so if u could go back to stock recovery and clean everything and then download 20c firmware and dll u should be good to go. If u still cant flash 20c firmware try 20d not 20o as it 20d is what my g2 came with first.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
That's what's weird. I am using the 20c tot. I have stock recovery. Return to factory does nothing. Still a brick. Anyone else have my problem and overcome it?
Sent from my SM-G900T using XDA Free mobile app

jayb222 said:
That's what's weird. I am using the 20c tot. I have stock recovery. Return to factory does nothing. Still a brick. Anyone else have my problem and overcome it?
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Pm me I think I can help. Sorry I may be a month late

SamerAdra said:
My LG G2 D800 (AT&T) 32 GB is stuck in download mode and I cannot flash the stock ROM to it.
I can't get out of download mode no matter how I try to press keys at boot, etc. -- just a black screen with the LG logo.
adb devices returns no devices found.
Shows in Windows Device Manager as "LGE AndroidNet USB Serial Port (COM4)."
Flash Tool finds my device, but when I try to flash (using dll C:\Users\SAdra\Downloads\LGD800_20130904_LGFLASHv160.dll and S/W LGD800AT-01-V10O-310-410-OCT-19-2013+0.tot), it fails immediately and says "Model Information Check Fail!"
It shows "IMEI : " and "Model : ". That's really scary if that information has truly disappeared (not sure how that could have happened though). I at least have the IMEI on a sticker on the back.
I used ioroot to successfully enter root mode, so I should have an EFS backup, but I don't know how to recover it since I'm in download mode and the only tool I have to work with is the LG FlashTool, which isn't happy with me right now. I've tried key combinations but I can't seem to enter recovery mode or fastboot or anything from here.
Previously I was stuck in a fastboot loop but then I re-flashed most of the stock partitions from (downloads.codefi.re 10d_partitions directory under D800 Stock_Firmware) -- I remember doing this for aboot, boot, dbi, laf, modem, recovery, and abl1 -- I was following some dumb forum post in which someone recommended doing that -- duhh...
I would be happy at this point if I could get back into my fastboot loop -- at least I could flash stuff from there.
What got me into the fastboot loop in the first place was flashing the BeanStalk ROM (it was a two-part thing where you were supposed to first flash the main ROM and then flash a device-specific patch -- well, the initial ROM flash got me into the fastboot loop).
Any recommendations? If I were to use Linux, would I have any other options -- I've seen people mention flashing partitions using dd?
At this point I'm about ready to take it in to AT&T (still under warranty / in contract) and beg for help, although I know I've obviously voided my warranty by rooting it.
I've seen a few older threads where people are stuck in download mode and have the same "model information" error in FlashTool, and it seems nobody ever replies to those threads, so I think I'm out of luck. If anybody has gone through this or has any idea what I can do, I would really appreciate the help.
Thanks,
Click to expand...
Click to collapse
Hey,i had same issue but i solved it with srk tool 2.0 try it,it works for me don,t forget to hit thanks

LG G3 D855 32 GB won't turn on after flasing stock rom

Hi
I had the standard kitkat factory rom installed in my g3.I rooted the phone installed the twrp recovery, everything worked fine. Then I downloaded the stock lollipop rom for lg g3 d855 and flashed it through the TWRP recovery. During installation it formated the previous system. I rebooted the phone and from that moment it is not turning on. In removed the battery several times, tried to charge it , it shows no response. When I connect it with a computer then a com port is added in the device manager which shows phone is showing some response.
kindly help me regarding this issue.
Thank You

aeroexpert said:
Hi
I had the standard kitkat factory rom installed in my g3.I rooted the phone installed the twrp recovery, everything worked fine. Then I downloaded the stock lollipop rom for lg g3 d855 and flashed it through the TWRP recovery. During installation it formated the previous system. I rebooted the phone and from that moment it is not turning on. In removed the battery several times, tried to charge it , it shows no response. When I connect it with a computer then a com port is added in the device manager which shows phone is showing some response.
kindly help me regarding this issue.
Thank You
Click to expand...
Click to collapse
Did you do a full wipe before you flashed? Can you access TWRP? Can you access Download Mode? Please provide more info. Although I know nothing about unbricking devices, maybe someone with the right experience can help you, but you should give as much info and details as possible.

If you can still access in TWRP you can flash a custom ROM
Sent from my ALCATEL ONE TOUCH 6040D using XDA-Developers mobile app

joe2k01 said:
If you can still access in TWRP you can flash a custom ROM
Sent from my ALCATEL ONE TOUCH 6040D]
Click to expand...
Click to collapse
Well I did not wipe before installing new firmware through TWRP
Now phone is hard bricked,
It can't go to twrp, no recovery, no dowload or fastboot mode, Phone won't turn on and is recognized as LGE AndroidNet USB Serial Port in my laptop.

aeroexpert said:
Well I did not wipe before installing new firmware through TWRP
Now phone is hard bricked,
It can't go to twrp, no recovery, no dowload or fastboot mode, Phone won't turn on and is recognized as LGE AndroidNet USB Serial Port in my laptop.
Click to expand...
Click to collapse
Maybe you should try this: http://appsandtips.blogspot.co.il/2015/11/how-to-hard-unbricked-lg-g3-all-variants.html?m=1
This tutorial also seems nice: http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
Good luck and hope you'll unbrick it successfully. Anyway you got nothing to lose I guess...
Sent from my LG G3 D855 running stock Lollipop v21a.

I have Opened my LG g3, did the steps as mentioned, now i am stuck in Borad Diag app which shows following error during test,
No response from the device, Check PMIC First and if still boot problem, replace AP ,
Do you know what should I do to fix it ?
Thank You
Sent from my ALE-L21 using XDA-Developers mobile app

aeroexpert said:
I have Opened my LG g3, did the steps as mentioned, now i am stuck in Borad Diag app which shows following error during test,
No response from the device, Check PMIC First and if still boot problem, replace AP ,
Do you know what should I do to fix it ?
Thank You
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
As I said earlier, I have no experience with unbricking. However, what is your PC operating system (maybe windows 10 do problems?), do your device appear as qualcomm 9008 in the device manager?
Sent from my LG G3 D855 running stock Lollipop v21a.

Thank You, I am on WIN 10, that is not a problem , I shall see what I can do, May be I shall use LG Smart Boot Diagnostics Tool
Sent from my ALE-L21 using XDA-Developers mobile app