Related
Good afternoon everyone .. I have a problem and would like your help .. this bricked my Xperia U C2104 and I can not pass or flashmode FASTMODE to install rom via Flashtool. He does not care does nothing .. I tried to install ClockworkMod but it happened .. If anyone can help me I would be very grateful ...
PS: I'm trying to put the path setool2 funcianal not found this program .. so error "smart card not found"
Sorry for my English, I'm Brazilian
Is your phone staying at the boot animation ? Download a custom rom made by Serajr and copy to sd.
If yes, flash vengeance kernel (do not flash modules!) via fastboot, goes to CWM, partition and format /system. Then flash the rom using cwm, and you will be able to flashmode via flashtool. When your phone boot's up and you able to use it, flash extended kernel v2 to have wifi working. I done it and fixed my XL from brick
damian01211 said:
Is your phone staying at the boot animation ? Download a custom rom made by Serajr and copy to sd.
If yes, flash vengeance kernel (do not flash modules!) via fastboot, goes to CWM, partition and format /system. Then flash the rom using cwm, and you will be able to flashmode via flashtool. When your phone boot's up and you able to use it, flash extended kernel v2 to have wifi working. I done it and fixed my XL from brick
Click to expand...
Click to collapse
Thank you for your friend .. My Xperia or boot appears ... I can not call it .. I tried to put the fastboot message appears QHSUSB_DLOAD .. I can not even access to flash a kernel ..Sought solutions .. the only one I found was by SEtoll2 can not put this program functional for Win7 .. I do not know if will work too ..
:crying: :crying:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Try removing battery for 2-3 minutes and se if that can get it to boot or at least get to recovery.
Redzo said:
Try removing battery for 2-3 minutes and se if that can get it to boot or at least get to recovery.
Click to expand...
Click to collapse
I'm in recovery mode now.
I'll look in the forum for a modus opererando from that point but again any additional suggestion/help is welcome
ok.
I'm in the recovery mode v5.0.3.5 by TZ (guess is the phanton owner)
My SD card is formated and I've copied the phanton.zip file. tried to install... no luck. also copied the sony factory file and still no luck.
the menu gives me different options but not sure what to do. will still look in the forum but no luck so far....
I have not rooted the device (and do not know what to do), still cannot flash the factory rom with flashtool (as described above) ...
Any help on where to start from the recovery mode?
francoism said:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Click to expand...
Click to collapse
Welcome to XL world!
I think that you are a little bit confused!Relax...
First of all...,ftf is stock rom and .img is kernel.
So,first u have to unlock the bootloader and then u have to flash stock rom again otherwise u'll get into bootloop.Then u have to flash a custom kernel with CWM (which u can find in Development sector or in Original Development sector) and then flash a custom ROM via CWM from Development sector...
Hope I helped...
kazabubu said:
Welcome to XL world!
I think that you are a little bit confused!Relax...
First of all...,ftf is stock rom and .img is kernel.
So,first u have to unlock the bootloader and then u have to flash stock rom again otherwise u'll get into bootloop.Then u have to flash a custom kernel with CWM (which u can find in Development sector or in Original Development sector) and then flash a custom ROM via CWM from Development sector...
Hope I helped...
Click to expand...
Click to collapse
thanks Kazabubu, I understand the steps you described and :
1) I have successfully unlock the bootloader
2) TRIED to flash the stock rom (ftf) (using flashtool, in flash mode ) but the phone was staying in "Preparing files for flashing" and then disconnecting
3) I think I managed to flash a custom kernel ( phanton) in fastboot mode
4) reboot in recovery mode
5) tried unsuccessfully to install a ROM (stock or custom) under recovery mode.
NOW... extremely strangely I left my phone connected to my PC and went to buy some stuffs... When I came back flashtool had flashed the stock rom... and it's working again.... do not ask me how... I have no idea.
I''ll leave it like that and will "only" try to root it as it is.
I'll close the thread and again thanks for you help guys!
Just flash a custom kernel first then boot into CWM and then flash a SuperSU.zip from the recovery.. It will directly root your phone..
Here is the link for the Zip file..http://download.chainfire.eu/204
Sent from my LT26ii using xda app-developers app
can u help me ?
varunpilankar said:
Just flash a custom kernel first then boot into CWM and then flash a SuperSU.zip from the recovery.. It will directly root your phone..
Here is the link for the Zip file..http://download.chainfire.eu/204
Sent from my LT26ii using xda app-developers app
Click to expand...
Click to collapse
I tried to root via VROOT , next step i installed http://forum.xda-developers.com/showthread.php?t=2598697
dexteroid.
now my phone wont start, it only shows black screen....can you help me
Is it showing you red light when you keep on charge?
Sent from my LT26ii using xda app-developers app
okay chill!
Open flashtoot Dont connected your phone
click on the thunder logo..then flashmode the choose the file you want to flash..it will prepare the file..
After that it will prompt you to connect your phone
press vol.down and connect your phone!
Hope it helps~
francoism said:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Click to expand...
Click to collapse
its very easy my friend just download cm11 google for xperia l transfer it to ext sd card then go to recovery mod factory reset everything wipe cache and delvik too then install cm11 zip
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......
plz can anyone tell how to enable usb debugging mode when phone is bricked.....
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:
software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??
Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...
Guys....my question is how to enable usb debugging on a soft bricked device
help me bricked micrmex express 2 plz
my phone too .. I forgot to switch my USB debugging...
Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]
The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk
I tried flashing the sony stock rom on my xperia l but I accidentally flashed the Xperia M's stock rom. Now my l is dead I can't get to fastboot/ flashboot mode It doesn't boot just cold black screen. My computer recognizes it as QPSUSB. My warranty's over and there is no near service center near me. I just need somebody's help. thanks in advance!
Same with me
I tried to change the boot logo, but it just work for smartfren(smartphone on my country)
after reboot it show nothing same as you
The solution is.......
Buy new one
my phone still in warranty period so i brought it to service center.... guess what....??? they change into new one
JUst motherboard
Gray_jm said:
I tried flashing the sony stock rom on my xperia l but I accidentally flashed the Xperia M's stock rom. Now my l is dead I can't get to fastboot/ flashboot mode It doesn't boot just cold black screen. My computer recognizes it as QPSUSB. My warranty's over and there is no near service center near me. I just need somebody's help. thanks in advance!
Click to expand...
Click to collapse
I think your phone just died. Stock flashtools are dangerous because these apps re-flash boot, partitions, system, and (sometimes) even a bootloader. If I remember well there was another user with the same problem. And no one was able to help him.
Gray_jm said:
I tried flashing the sony stock rom on my xperia l but I accidentally flashed the Xperia M's stock rom. Now my l is dead I can't get to fastboot/ flashboot mode It doesn't boot just cold black screen. My computer recognizes it as QPSUSB. My warranty's over and there is no near service center near me. I just need somebody's help. thanks in advance!
Click to expand...
Click to collapse
find somebody who knows how to use jtag.. by jtag u can fix d motherboard wic fill fix d brick
Hello, I understand your phone is still possible to connect in fastboot mode, then the solution is to flash a custom kernel in this way, make a full wipe, and install a custom rom. But he said this is only possible if you have unlocked bootloader, otherwise you'll have a hardbrick
Click thanks if help you
Enviado desde mi C2105 usando XDA Premium HD app
bricked my phone..help
i rooted my xperia . then installed clockworkmod recovery.then in recovery mode i tried to install the CM11(taoshan) custom rom. and during the installation it showed some error.and stopped. i tried to exit the recovery mode and den rebooted my phone. now it just shows sony logo....dats it. nothing else.m not able to even bring it in cwm recovery mode. wat sud i do....................help
ruderocky said:
i rooted my xperia . then installed clockworkmod recovery.then in recovery mode i tried to install the CM11(taoshan) custom rom. and during the installation it showed some error.and stopped. i tried to exit the recovery mode and den rebooted my phone. now it just shows sony logo....dats it. nothing else.m not able to even bring it in cwm recovery mode. wat sud i do....................help
Click to expand...
Click to collapse
Dude thats not bricked..wic error ??probably old recovery
Simple steps follow
1) extract cm zip...flash boot.img via flashtool thru fastboot mode
2)power on
3)go into recovery wipe data ,format system
4) flash cm11
N d reason its stuck on sony is ur system is jellybean n kernel is of kitkat
Hit thanks if i helped
Rohan purohit said:
Dude thats not bricked..wic error ??probably old recovery
Simple steps follow
1) extract cm zip...flash boot.img via flashtool thru fastboot mode
2)power on
3)go into recovery wipe data ,format system
4) flash cm11
N d reason its stuck on sony is ur system is jellybean n kernel is of kitkat
Hit thanks if i helped
Click to expand...
Click to collapse
okkhhy...........and do i need to unlock bootloader.??...m actually new to all these
ruderocky said:
okkhhy...........and do i need to unlock bootloader.??...m actually new to all these
Click to expand...
Click to collapse
To install kitkat..first root..then unlock bootloader then above steps
Read guides in general and in google before doing anything
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.