Just curious if there is a way to get the t-mobile feature of wifi calling on phones which are not running the stock t-mobile rom? I have a phone in canada that uses a US sim for when we send drivers to the states for deliveries (transportation company) but the phone is from canada.
Can this be achieved? Is there maybe a successful app that can do this?
Bloodyskullz said:
Just curious if there is a way to get the t-mobile feature of wifi calling on phones which are not running the stock t-mobile rom? I have a phone in canada that uses a US sim for when we send drivers to the states for deliveries (transportation company) but the phone is from canada.
Can this be achieved? Is there maybe a successful app that can do this?
Click to expand...
Click to collapse
Nope. Many have tried, all have failed. It was possible until T-mobile changed the APK when ICS was released.
How did the APK affect everything? Did they add some special code that makes it not function properly?
So would changing the rom from lets AT&T to T-mobile or from Rogers to T-mobile, would the feature be successfully unlocked?
Bloodyskullz said:
How did the APK affect everything? Did they add some special code that makes it not function properly?
So would changing the rom from lets AT&T to T-mobile or from Rogers to T-mobile, would the feature be successfully unlocked?
Click to expand...
Click to collapse
I don't know the specifics, but it is built into the framework of the ROM. Yes, changing the ROM on another network's device to a T-mobile ROM will allow you to use the Wi-Fi calling feature.
Figured as much.
Thanks for the responses.
The first requisite is that you're using a T-Mobile SIM, because the SIM has an internal authentication method that interfaces with the internal Wifi Calling app. You can't use any other carrier's ROM/Wifi Calling (e.g. Rogers' Wifi Calling) with a T-Mobile SIM, even if both carriers use Wifi Calling.
The second requisite is that the carrier actually supports Wifi Calling. It requires specific Kineto servers on their end.
Thirdly, you can flash a T-Mobile ROM on, say an AT&T phone (I've done this with an AT&T S4) if the phone can handle it, and that will "enable" (because it'll technically become a T-Mobile phone) Wifi Calling.
Fourthly, Wifi Calling is more than just an APK. Previously, it used UMA; that meant that the phone sent normal GSM signal over Wifi instead of through it's cellular radio. Now it uses a proprietary SIP (completely internet-based) protocol that nobody has been able to port to other ROMs. It's extremely embedded into the software framework of the phone.
So pretty much if you want to be able to use T-Mobile Wifi Calling, you need a T-Mobile phone or a T-Mobile ROM. The good news is that T-Mobile phones are fully compatible with all carriers in the US & Canada. They have all the required frequencies for every carrier. I have family up in Canada, so I'm familiar with all the Canadian carriers and what bands they operate on. Or like I said, you can flash your phones (depending on the phone, if T-Mobile also has it) with a T-Mobile ROM.
By the way, calling to Canada would still cost you with a normal T-Mobile plan. It's considered long-distance from a US perspective. There are apps you can use to make phone calls to land lines over Wifi, like Skype (if you pay). You could also use free apps that allow you to make calls to other people using the app (like Viber, which also does free messaging similar to Whatsapp and has a desktop app).
You would also need the right SIM card. Not all T-Mobile SIM cards support Wi-Fi calling.
Sent from my SGH-I747M using xda app-developers app
gc84245 said:
No, it's not just the ROM it's also the SIM card. I had a T-Mobile phone with Canadian SIM card and it definitely does not work.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Considering he said his sim was from the US, I think it is safe to assume that it is not a Canadian sim, and most likely T-mobile.
Uggg, this XDA app is terrible, I can't even edit posts. Anyways, how do I know what SIM card this person has? They didn't say, but even if we assume it's T-Mobile that's no guarantee it will work.
Sent from my SGH-I747M using xda app-developers app
Glad to know that there are a few people here that know about the canadian phones. I just found the t-mobile rom so I am going to try and flash it via odin on my canadian phone.
And for the record so it doesn't confuse other XDA members, its a T-mobile sim and one of their more recent micro sims.
Don't ODIN another model's ROM. Stock ROM files include a modem. If you flash another model's modem, you will lose your IMEI. You need to root the phone and install a custom recovery so you can flash the ROM without the modem.
Pretty much all of their SIMs from the last two years will work. So that's not an issue. Like I said though, Wifi Calling simulates being you in the US. For example, I visit my grandparents in Ottawa. I use their Wifi to make Wifi Calls on my Galaxy Note 3. The calls are made as if I'm in the US. Meaning if I used Wifi Calling to call one of my friends who lives in the US, it counts as a domestic call. But if I call my grandparents' house phone, it'll be long distance, the same as if I were in the US making the call to Canada.
If you're trying to save money on calls, this won't work since you'll still be calling Canada long distance.
Product F(RED) said:
Don't ODIN another model's ROM. Stock ROM files include a modem. If you flash another model's modem, you will lose your IMEI. You need to root the phone and install a custom recovery so you can flash the ROM without the modem.
Pretty much all of their SIMs from the last two years will work. So that's not an issue. Like I said though, Wifi Calling simulates being you in the US. For example, I visit my grandparents in Ottawa. I use their Wifi to make Wifi Calls on my Galaxy Note 3. The calls are made as if I'm in the US. Meaning if I used Wifi Calling to call one of my friends who lives in the US, it counts as a domestic call. But if I call my grandparents' house phone, it'll be long distance, the same as if I were in the US making the call to Canada.
If you're trying to save money on calls, this won't work since you'll still be calling Canada long distance.
Click to expand...
Click to collapse
Glad I caught this. I didn't think this would actually have such a possible outcome.
Where can I get the t-mobile rom only then? sammobile doesn't seem to bring up the rom when i type in the model number of the phone.
Bloodyskullz said:
Glad I caught this. I didn't think this would actually have such a possible outcome.
Where can I get the t-mobile rom only then? sammobile doesn't seem to bring up the rom when i type in the model number of the phone.
Click to expand...
Click to collapse
Which phone is it?
It's probably easier to go with a custom T-Mobile ROM from here on XDA since you won't be taking official updates anyway.
N900w8 - telus carrier.
EDIT: judging by the second statement, the custom roms aren't exactly AOSP based if one would still want to acquire such a feature.
Bloodyskullz said:
N900w8 - telus carrier.
EDIT: judging by the second statement, the custom roms aren't exactly AOSP based if one would still want to acquire such a feature.
Click to expand...
Click to collapse
The Canadian Note 3 is actually equivalent to the T-Mobile Note 3 (same frequencies). You can flash a T-Mobile Note 3 custom ROM from here (just don't flash any modems). Get one that is Touchwiz based. NB4-based ROMs (Android 4.4.2) are the latest. Vision NX3 is one that I use and is a minimally-tweaked stock based ROM (it includes some T-Mobile bloat, but that can be removed with root apps like Titanium Backup).
Would it be possible to flash a stock T-Mobile rom to at&t lg g4 I can skip the modem flash, I know that's a bad idea.
Related
[I'd like to create a thread to collect information for all variants of the R530. I'll update this first post with additional information people give during discussion. Sorry it is here in the Verizon sub, but this is the closest model]
The SCH-R530 is a special flavor of the Samsung Galaxy S3 with sub-favors: (you should probably puke now)
SCH-R530U is a US Cellular variant
SCH-R530C is a Cricket variant
SCH-R530M is a MetroPCS variant
SCH-R530X is a Generic variant
I suspect these are all the same hardware, but just different ROMs. I would like to confirm this.
I would like to know and post the newest firmware versions for each. (at least the names, if not the ROM files themselves) I'd like to know if ROMs are compatible, if modem firmwares are compatible, if bootloaders are compatible. The small community of owners need to pull together as much as possible.
Model -- Hardware Version / Firmware Versions / Baseband
SCH-R530U --
SCH-R530C --
SCH-R530M --
SCH-R530X -- R530X.01 / JSS15J.R530XWWUBMK4 / R530XWWUBMK4
Please post if you can add to this information!
I'm working on my dad's SCH-R530X (Generic CDMA). It was on a regional CDMA provider that he was not happy with -- he paid $500 to them in January for the phone. Edit: Today, he's on PagePlus, but without data for some reason.
Concerns (that someone may be able to help me with):
Once you go to KK 4.4 you can not go back? Your bootloader is updated and will not boot 4.3?
I'm running 4.3, can I root -> replace recovery -> custom ROM ... without tripping the KNOX warranty void? I've read that saferoot will not trip KNOX?
This phone seems to have an odd Call Audio Quality problem. While listening during a phone call (on the R530), the other party's voice cuts out. Specifically, it cuts out when the other person isn't speaking in their mic close enough or loud enough. It's as if the R530 is filtering out anything under a certain volume level. I've turned off Call Equalizer and Noise Reduction to try to solve this problem. I believe I've read people say a firmware/ROM update from US Cellular fixed this problem.
So you can see, I have some constraints: Still in warranty and don't want to void it by tripping KNOX. Want to try a newer firmware for call audio problem. Don't want to brick phone with incompatible firmware, unless US Cellular will work on this X/Generic phone.
Help would be appreciated.
I do have the USC and Cricket variants but the USC version is soft bricked.
HW: R530C.01
Firmware: JSS15J.R530CVVUCMK3
Baseband: R530CVVUCMK3
Also fyi, this and the USC version requires a sim card.
motoyola said:
I do have the USC and Cricket variants but the USC version is soft bricked.
HW: R530C.01
Firmware: JSS15J.R530CVVUCMK3
Baseband: R530CVVUCMK3
Also fyi, this and the USC version requires a sim card.
Click to expand...
Click to collapse
Thanks... I'll add the info. I think I'll make a spot to record if it has a SIM slot too -- as my 530X does not have a SIM slot and was labeled with a little sticker "3G CDMA"... but the MEID starts with a "9" and LTE visible in DFS.
syserr said:
Thanks... I'll add the info. I think I'll make a spot to record if it has a SIM slot too -- as my 530X does not have a SIM slot and was labeled with a little sticker "3G CDMA"... but the MEID starts with a "9" and LTE visible in DFS.
Click to expand...
Click to collapse
I have a regional version of the s3 as well, d2xar (sch-r530x) on Inland Cellular, primarily based in the north west US. as far as i can tell, i havent dissasembled my phone to see if there is a lte radio, in the original build.prop for my phone it is disabled on boot so it will not consume power since it is not being used. thus the 3g cdma only sticker. for the us cellular version i do not know if there is a kitkat firmware but if there is there is always the possiblity you will not beable to go back. as for the generic version it is only on 4.3 right now. eitherway the higher the bootloader version is better for customroms due to recoveries and features working better. as for saferoot i dont remember if it trips the warranty bit or not since ive long since written a custom recover to the device which tripped it but i do know itll make the stock rom list itself as custom in the settings after being rooted. also something to keep in mind with a custom rom is, unless you have the apns for your carrier eg, pageplus, usc, ect. you will not have mms capabilities. Im still tearing my build.prop and apn back up apart to see if i can include some of that info into a custom rom to fix mms, or a recovery that will inject it after a rom flash.
Update?
Lrs121 said:
I have a regional version of the s3 as well, d2xar (sch-r530x) on Inland Cellular, primarily based in the north west US. as far as i can tell, i havent dissasembled my phone to see if there is a lte radio, in the original build.prop for my phone it is disabled on boot so it will not consume power since it is not being used. thus the 3g cdma only sticker. for the us cellular version i do not know if there is a kitkat firmware but if there is there is always the possiblity you will not beable to go back. as for the generic version it is only on 4.3 right now. eitherway the higher the bootloader version is better for customroms due to recoveries and features working better. as for saferoot i dont remember if it trips the warranty bit or not since ive long since written a custom recover to the device which tripped it but i do know itll make the stock rom list itself as custom in the settings after being rooted. also something to keep in mind with a custom rom is, unless you have the apns for your carrier eg, pageplus, usc, ect. you will not have mms capabilities. Im still tearing my build.prop and apn back up apart to see if i can include some of that info into a custom rom to fix mms, or a recovery that will inject it after a rom flash.
Click to expand...
Click to collapse
Any update to this? I have the sticker too and it'd be great to have LTE on since this phone supports it, it seems. I've made this post
http://forum.xda-developers.com/galaxy-s3/general/s3-d2xar-cdma-how-to-set-straight-talk-t3012846
uplusion23 said:
Any update to this? I have the sticker too and it'd be great to have LTE on since this phone supports it, it seems. I've made this post
http://forum.xda-developers.com/galaxy-s3/general/s3-d2xar-cdma-how-to-set-straight-talk-t3012846
Click to expand...
Click to collapse
Last I checked there was a bug with the d2lte builds that break the ability to set apns... I made a cm10.2, I think, build that allowed changing the APN. Um if I remember right the physical design of the d2xar has hardware similar to the Verizon s3. I still don't know if there is an lte modem in the phone since there doesnt seem to be a sim card slot, though there maybe an integrated uicc. I haven't played with it much since I switched to using my nexus 5 on T-Mobile.
Lrs121 said:
Last I checked there was a bug with the d2lte builds that break the ability to set apns... I made a cm10.2, I think, build that allowed changing the APN. Um if I remember right the physical design of the d2xar has hardware similar to the Verizon s3. I still don't know if there is an lte modem in the phone since there doesnt seem to be a sim card slot, though there maybe an integrated uicc. I haven't played with it much since I switched to using my nexus 5 on T-Mobile.
Click to expand...
Click to collapse
I got to the service mode settings, which oddly enough it listed GSM and CDMA. Quite weird. To get there was even weirder. Sadly the D2xar doesn't support TWRP Recovery, and the only one that works is CWM by Philz.
uplusion23 said:
I got to the service mode settings, which oddly enough it listed GSM and CDMA. Quite weird. To get there was even weirder. Sadly the D2xar doesn't support TWRP Recovery, and the only one that works is CWM by Philz.
Click to expand...
Click to collapse
Yah I noticed that to when I was digging around for apns for my old carrier. As for twrp I got around that problem by building my own version using cyanogenmod and the d2lte device files. It made cyanogenmod delta updates possible on the d2lte build. Which are really nice. My source is floating around github, though you'd have to do a little digging to find everything. I do have precompiled twrp images on my webserver that I try to keep up to date for my friend who's brother has the same phone. If you go to my site its safe to ignore the certificate warnings, I have it set to force HTTPS and the reason the warning pops up is because I self signed it instead of paying for a company like verisign
Sorry for my superbly late reply. I've done a ton of digging with this phone. Turns out it only supports Evdo. So no LTE sadly. Even worse, using the Test Menu I can't bands to USA bands, only the (800 or 850?) Hz Global band. I can't get a connection. Well. The bars are listed as 2-3 generally, but it says "Roaming Indicator Off". I have the latest and only baseband, too.
(Wow. After two months of fiddling, as of typing this, I turned on cellular service, which is usually in Airplane mode, I got a " 3G" connection for the first time. Only for a second.)
I don't think I'll be able to switch this over to Straight Talk any time soon, though. I'll check your GitHub soon for that TWRP.
---------- Post added at 11:00 AM ---------- Previous post was at 10:49 AM ----------
uplusion23 said:
Sorry for my superbly late reply. I've done a ton of digging with this phone. Turns out it only supports Evdo. So no LTE sadly. Even worse, using the Test Menu I can't bands to USA bands, only the (800 or 850?) Hz Global band. I can't get a connection. Well. The bars are listed as 2-3 generally, but it says "Roaming Indicator Off". I have the latest and only baseband, too.
(Wow. After two months of fiddling, as of typing this, I turned on cellular service, which is usually in Airplane mode, I got a " 3G" connection for the first time. Only for a second.)
I don't think I'll be able to switch this over to Straight Talk any time soon, though. I'll check your GitHub soon for that TWRP.
Click to expand...
Click to collapse
Yeah, just of now I've been unable to re-acquire the "3G" that caused me to have a boost of hope. Now even when I attempt calling which it usually would bring me to the Verizon automated system, asking to make a collect call, since around here is primarily Verizon, I can't even get it to call. It now states that no mobile network is available, even when I have 2-3 bars.
You have no "3g" because your keys are wrong. Y'all need some QPST and see the whole logon process and baseband messages. Then you can really troubleshoot your phone.
I have a Verizon Samsung Galaxy S3 on the Straight Talk network. I check for software updates and it tells me the software is up to date however it says my phone is running off of 4.4.2 instead of the Lollipop or the one just under. Does anyone know if Lollipop 5.0 or 5.1 has reached the S3 yet? Or how to manually update my phone software so its not so low?
flash a custom rom with 5.x for your model.
nxb said:
flash a custom rom with 5.x for your model.
Click to expand...
Click to collapse
Phone is not rooted so how do I do that? I need or to be updated. My phone doesnt work right on 4.4.2
Sent from my SCH-I535 using XDA Free mobile app
you will have to root, trip knox and lose your warranty... there is no way to go back. on verizon you may be screwed if you have signed/locked bootloaders. search on XDA about unlocked bootloaders for verizon. also: http://androidforums.com/threads/verizon-verizon-bootloader-unlock.856221/
aaaand... make sure to back up your mmc boot partitions so you can debrick if you mess up.
p.s. prepare to learn a lot of technical things. if that sounds annoying and you don't want to spend a lot of time on it you might be better off buying a used phone.
nxb said:
you will have to root, trip knox and lose your warranty... there is no way to go back. on verizon you may be screwed if you have signed/locked bootloaders. search on XDA about unlocked bootloaders for verizon. also: http://androidforums.com/threads/verizon-verizon-bootloader-unlock.856221/
aaaand... make sure to back up your mmc boot partitions so you can debrick if you mess up.
p.s. prepare to learn a lot of technical things. if that sounds annoying and you don't want to spend a lot of time on it you might be better off buying a used phone.
Click to expand...
Click to collapse
I'm not using Verizon. I'm using straight talk on a Verizon phone
Sent from my SCH-I535 using XDA Free mobile app
ST only has GSM AT&T and CDMA verizon... if you have an I535 past 4.3 you have locked bootloader problems.
Needing the pit file for the SCH-R530C. PLEASE! I am at the end of my tether. Thank you in advance, DaMoose
DaMoose517 said:
Needing the pit file for the SCH-R530C. PLEASE! I am at the end of my tether. Thank you in advance, DaMoose
Click to expand...
Click to collapse
Do you have any idea if the 530c and the 530x share a similar partition table? If they do then I can pull the one from my 530x
Lrs121 said:
Do you have any idea if the 530c and the 530x share a similar partition table? If they do then I can pull the one from my 530x
Click to expand...
Click to collapse
I do not know. I'd love to take the chance, but the risk of totally bricking the R530C is there . . . heck, let me try it.
Hi,
Just bought today the verizon variant of the galaxy s6, and I need help with a couple of questions:
I'm moving to Europe in the near future, would I still be able to use the phone?
From who do I get software updates? Will I get updates from verizon even if I'm abroad?
Would it be able to flash international firmware on this phone in the future? Are the models fundamentally different from each other or are they just handicapped by firmware?
Thanks in advance
yuviyuval said:
Hi,
Just bought today the verizon variant of the galaxy s6, and I need help with a couple of questions:
I'm moving to Europe in the near future, would I still be able to use the phone?
From who do I get software updates? Will I get updates from verizon even if I'm abroad?
Would it be able to flash international firmware on this phone in the future? Are the models fundamentally different from each other or are they just handicapped by firmware?
Thanks in advance
Click to expand...
Click to collapse
Yes it works internationally, I'm using it on GSM right now and plan to use it in Egypt over the summer. You will get updates but I think verizon needs a verizon sim to check for updates but when one releases you can always check through a computer if you need to. As far as I know verizon one is the bay because it supports CDMA radios and GSM radios and comes pre unlocked while other versions like tmobile only support gsm. That's the only hardware difference, the rest is all software.
Also be careful with your phone! Nor sure where in Europe yuppie going but some classes visited Spain recently and lots of them we're pickpocketed and had something stopen.
Sent from my Verizon S6,
formerly abdel12345
supersmash19 said:
Yes it works internationally, I'm using it on GSM right now and plan to use it in Egypt over the summer. You will get updates but I think verizon needs a verizon sim to check for updates but when one releases you can always check through a computer if you need to. As far as I know verizon one is the bay because it supports CDMA radios and GSM radios and comes pre unlocked while other versions like tmobile only support gsm. That's the only hardware difference, the rest is all software.
Also be careful with your phone! Nor sure where in Europe yuppie going but some classes visited Spain recently and lots of them we're pickpocketed and had something stopen.
Sent from my Verizon S6,
formerly abdel12345
Click to expand...
Click to collapse
So just to clarify, I can just purchase an EE nano sim card from amazon, take my s6 to london, pop it in, and it should work? I don't have to call Verizon before hand to get it network unlocked?
voldyy said:
So just to clarify, I can just purchase an EE nano sim card from amazon, take my s6 to london, pop it in, and it should work? I don't have to call Verizon before hand to get it network unlocked?
Click to expand...
Click to collapse
Correct. You may have to set up apns for data though. But text and voice should work out the box.
What can I do to use the GSM network, 3G !!!!
I live in china
zintung2911 said:
What can I do to use the GSM network, 3G !!!!
I live in china
Click to expand...
Click to collapse
3G only for China Unicom. Add the APN of Unicom and then H+ will work.
voldyy said:
So just to clarify, I can just purchase an EE nano sim card from amazon, take my s6 to london, pop it in, and it should work? I don't have to call Verizon before hand to get it network unlocked?
Click to expand...
Click to collapse
920V is different from the international version. It supports very few LTE bands and i'm not sure it supports as many 2g/3g bands as the internation one. you may have voice but you won't have LTE.
toskabab said:
Correct. You may have to set up apns for data though. But text and voice should work out the box.
Click to expand...
Click to collapse
Hi,
Didn't u have the same issue with texting?
I bought my s6 from verizon on a trip in the USA, but I live in UK and using 3 network. The only issue is the texting. I spent lot of time to figure out what is the real problem, and it seems like it is sort of prefix problem. If I receive message from someone with new number with +4407 (obviously all of them start) and I reply, message is not going to be sent and I always get a message: " Your text to speech message to 0114407..... has been rejected by recipient phone." I never use text speech btw, and it definitely prefix problem because if I send to 07... only they receive it. I changed all my contacts to 07... but still after that I couldn't reply to messages for a long time just only with the Handcent next sms app. But If I receive a new message from a new number I'll get with +447.. and I need to save it and change the number to 07.. otherwise it will never work. I found some people had the same issue in the past, but there was no final solutions: http://forum.xda-developers.com/showthread.php?t=2106370
http://thedroidguy.com/2015/07/solutions-for-samsung-galaxy-s4-sms-mms-problems-part-2-110209
I am just wondering how is this gonna work abroad if I even can't use in the UK. I rooted and put clear rom, but still same.
toskabab said:
Correct. You may have to set up apns for data though. But text and voice should work out the box.
Click to expand...
Click to collapse
How do I add a new APN? I found Settings -> Mobile networks -> Access Point Names but the "Add" button is greyed out
I am seeing it greyed out as well. I was planning on getting UK 3 sim cards for our trip next year.
Sent from my SM-G920V using XDA Free mobile app
Bought 955FD myself here in saudi.
Followed instructions to make "cumulative 5 minute call" with middle east/north africa sim: regional unlock.
1st issue: wifi calling available?
Searched settings for wifi calling. Initially something pops up, such as an option but it asked for ?phone number? I dont recall, was too excited about getting ready to pop in sprint sim from edge6.
During this search i was waiting for smart switch to execute bringing files from edge6.
When its all done i see nothing about wifi calling on 955FD.
2nd issue: activating 955FD to Sprint network.
Called Sprint, they asked for HEX gave them the IMEI number, then informed phone is not compatible.
They informed me i could go into sprint store and have them flash the device to place it on sprint's system. But that didnt sound confident. The phone is not compatible but can be flashed.
I was told once before by sprint international they have special sims to be used on foreign devices. But after failed activation informed me the international sim would not work either. I am never satisfied with first tier help/information from sprint.
I am open any advice. Last hope is to switch to TMobile which i read in another xda forum it will work. But i am concerned about the wifi calling mainly.
If you're rooted, then flash the CSC selector and select TMB. It will bring you wifi calling and Volte in TMOBILE, Not sure Exynos model will support Sprint CDMA..
I'm using it in Tmobile.. Mine is G955F
Sent from my SM-G955F using Tapatalk
Not rooted. Never tried that before. Trying to stay away from that effort.
Must it be rooted to be used on Tmobile?
2nd issue: activating 955FD to Sprint network.
Called Sprint, they asked for HEX gave them the IMEI number, then informed phone is not compatible.
Click to expand...
Click to collapse
As SBR said above, Exynos does not support CDMA. Sprint is CDMA. Your rep was correct.
rkennison said:
As SBR said above, Exynos does not support CDMA. Sprint is CDMA. Your rep was correct.
Click to expand...
Click to collapse
Thank you. Would them offering to flash the device be worth a try for experimental purpose?
No. The Exynos chip does not support CDMA. That is only in the Qualcom chip. The problem lies in your CPU, not software.
You have two different types of cellular networks, CDMA and GSM. Sprint and Verizon use CDMA while everyone else (in the world) uses GSM.
Kind of just an FYI, in which case your phone will work on T-Mobile, but not sure about the extra steps with WiFi calling (though, if it's on these forums, then you should be set there too).
Will update about wifi calling feature after I speak to Mobile in few weeks upon returning to stattes.
Thanks.
955FD on T-Mobile
After signing up with Tmobile i am 99% all good. Only problem is no wifi calling feature has appeared.
J_blaze114 said:
After signing up with Tmobile i am 99% all good. Only problem is no wifi calling feature has appeared.
Click to expand...
Click to collapse
WiFi calling on TMobile requires the TMobile firmware (which isn't available on the 955FD model, obviously).
Even unlocked US phones from Samsung can't use WiFi calling on TMobile unless they flash TMobile firmware.
You cannot flash the TMobile firmware on your device.
Skander1998 said:
WiFi calling on TMobile requires the TMobile firmware (which isn't available on the 955FD model, obviously).
Even unlocked US phones from Samsung can't use WiFi calling on TMobile unless they flash TMobile firmware.
You cannot flash the TMobile firmware on your device.
Click to expand...
Click to collapse
So my only option is to use DIGITS app by tmobile. Not bad but overall happy with my choice to buy this model...so far.
Does anyone have a definite solution to this problem? I've read many opinions but haven't run across a solution. I have a Samsung unlocked S9+ running official AT&T firmware and userdata but the carrier specific apps and features still don't work. The best infomation I've found is that the IMEI numbers of the unlocked devices are not in AT&T system so the features/apps won't work.
If this is the case, has anyone had any luck getting AT&T to register their IMEI and get the features working?
What worked for me and others (see the at&t fw thread) is to call or chat with AT&T and give them a imei from a carrier branded phone(with your sim in, though this might not be required). Tell them you are trying to get wifi calling to activate and it is failing at the provisioning step and they will input your imei and it will reprovision. Then pull your sim and put it into your s9/+ running at&t fw and it will allow volte, wifi calling and call protect to work (these are the only ones I use).
Good luck
I talked with someone in AT&T technical support and they remoted directly into my phone, reset all app defaults and network settings.. This of course didn't fix anything so they opened a trouble ticket. They told me my IMEI was in their system and was OK. Haven't heard back yet.
why not just flash ATT U firmware?
I'm running AT&T official U firmware G965USQS2ARF4. What just occurred to me was that I didn't do a factory reset before or after applying it via ODIN.
Stuart R said:
I'm running AT&T official U firmware G965USQS2ARF4. What just occurred to me was that I didn't do a factory reset before or after applying it via ODIN.
Click to expand...
Click to collapse
Just did that... Didn't help.
Stuart R said:
Does anyone have a definite solution to this problem? I've read many opinions but haven't run across a solution. I have a Samsung unlocked S9+ running official AT&T firmware and userdata but the carrier specific apps and features still don't work. The best infomation I've found is that the IMEI numbers of the unlocked devices are not in AT&T system so the features/apps won't work.
If this is the case, has anyone had any luck getting AT&T to register their IMEI and get the features working?
Click to expand...
Click to collapse
Stuart R said:
I talked with someone in AT&T technical support and they remoted directly into my phone, reset all app defaults and network settings.. This of course didn't fix anything so they opened a trouble ticket. They told me my IMEI was in their system and was OK. Haven't heard back yet.
Click to expand...
Click to collapse
Yes your IMEI is in their system. But it's not an IMEI from a branded ATT phone. You have to have the IMEI from an ATT phone like others have said, and like i had to do or you will not get the features, no matter what firmware you flash. This has been discussed in many threads. You have to have ATT change your IMEI in their system.
elliwigy said:
why not just flash ATT U firmware?
Click to expand...
Click to collapse
Wont help unless you have a 965U or the IMEI from an ATT phone . ATT Features will not work on 965U1 IMEI. AT&T told me theses features wouldn't work on an unlocked phone and asked if i had the unlocked version. I told them no, it was an ATT phone i bought from Best Buy and it has an ATT logo (not the truth, got it from Samsung) and that i read in the forums that there were some issues with the S9 and that changing the IMEI fixed everyone's problems. I said i had my s8 here that everything works on and she said it's worth a shot to try and she changed mine in their system to the IMEI from my AT&T Branded S8 that i provided them. 965U1 has worked flawless ever since. All features work.
nugzo said:
Yes your IMEI is in their system. But it's not an IMEI from a branded ATT phone. You have to have the IMEI from an ATT phone like others have said, and like i had to do or you will not get the features, no matter what firmware you flash. This has been discussed in many threads. You have to have ATT change your IMEI in their system.
Wont help unless you have a 965U or the IMEI from an ATT phone . ATT Features will not work on 965U1 IMEI. AT&T told me theses features wouldn't work on an unlocked phone and asked if i had the unlocked version. I told them no, it was an ATT phone i bought from Best Buy and it has an ATT logo (not the truth, got it from Samsung) and that i read in the forums that there were some issues with the S9 and that changing the IMEI fixed everyone's problems. I said i had my s8 here that everything works on and she said it's worth a shot to try and she changed mine in their system to the IMEI from my AT&T Branded S8 that i provided them. 965U1 has worked flawless ever since. All features work.
Click to expand...
Click to collapse
sounds about right.. i mean you can switch csc while on U1 depending on the sim card inserted but U1 isnt meznt to have all the carrier crap they need for the special features to work so u get the bare minimum..
while on U firmware, it seems the csc doesnt fully switch like they did on the S8 devices.. i tested this on my sim unlocked vzw s9+ with an att sim and a sprint sim and although data and calls worked,it stsyed on verizon bootani and bloat etc etc no matter what i did.. before on s8 devices after a reset it would have changed the boot ani,bloat and woulda had all the carrier features..
im also surprised they changed your imei lol.. i thought that was illegal lol.. i guess if the carrier does it then its fine haha
nugzo said:
Yes your IMEI is in their system. But it's not an IMEI from a branded ATT phone. You have to have the IMEI from an ATT phone like others have said, and like i had to do or you will not get the features, no matter what firmware you flash. This has been discussed in many threads. You have to have ATT change your IMEI in their system.
Hard to believe that they would just accept another IMEI and register it to your phone. I thought these were all unique numbers that couldn't be used on more than one device. How did that change affect the phone that originally had the branded IMEI?
Click to expand...
Click to collapse
Stuart R said:
nugzo said:
Yes your IMEI is in their system. But it's not an IMEI from a branded ATT phone. You have to have the IMEI from an ATT phone like others have said, and like i had to do or you will not get the features, no matter what firmware you flash. This has been discussed in many threads. You have to have ATT change your IMEI in their system.
Hard to believe that they would just accept another IMEI and register it to your phone. I thought these were all unique numbers that couldn't be used on more than one device. How did that change affect the phone that originally had the branded IMEI?
Click to expand...
Click to collapse
Didnt affect original s8 i used at all. or the s9. I replaced the s8 with the s9 when it came out so i just used the sim out of the s8 when the s9 arrived. s8 is just a spare phone now. I asked the operator if this would disable the other phone that the IMEI came from and she said no. I put sim from s9 in s8 afterwards just to test and it worked fine. They arent changing the IMEI of your actual s9, it still shows your original IMEI in your phone settings. They are just using the IMEI you provided on their end. What is actually going on behind the scenes i dont know. Maybe somebody that works in carrier support or may just have knowledge on how this actually works could chime in. I'm guessing they just use the IMEI to activate the features, since the unlocked one isn't eligible. I saw a better explanation in one of the firmware threads, if i run across it i'll post the link.
Click to expand...
Click to collapse
I will reiterate what is said above and clarify my post. You aren't asking the support team to change your phones imei. I think as stated previously that is a forbidden/illegal maneuver. The support request is to change the imei which is active in the at&t system as only carrier branded phones are able to use certain at&t features.
If you have an old AT&T phone its imei can be used to "trick" at&t into activation/provisioning. Then you can put your sim into a U1 phone using at&t firmware and use carrier specific features.
Hopefully, this is easier to understand and clears up some of the confusion I may have introduced in my original reply.
jay2o01 said:
I will reiterate what is said above and clarify my post. You aren't asking the support team to change your phones imei. I think as stated previously that is a forbidden/illegal maneuver. The support request is to change the imei which is active in the at&t system as only carrier branded phones are able to use certain at&t features.
If you have an old AT&T phone its imei can be used to "trick" at&t into activation/provisioning. Then you can put your sim into a U1 phone using at&t firmware and use carrier specific features.
Hopefully, this is easier to understand and clears up some of the confusion I may have introduced in my original reply.
Click to expand...
Click to collapse
I presume I can use the IMEI from another brand of working AT&T phone such as an iPhone 6S (in this case, my wife's)?
Stuart R said:
I presume I can use the IMEI from another brand of working AT&T phone such as an iPhone 6S (in this case, my wife's)?
Click to expand...
Click to collapse
Another thought... Say I get an old Galaxy S6 which uses the same size Nano SIM as my S9+. I move my S9+ SIM to the S6, update it to the latest AT&T firmware and enable WIFI calling. If I then move my SIM back to my S9+, will the carrier features now work?
Stuart R said:
Another thought... Say I get an old Galaxy S6 which uses the same size Nano SIM as my S9+. I move my S9+ SIM to the S6, update it to the latest AT&T firmware and enable WIFI calling. If I then move my SIM back to my S9+, will the carrier features now work?
Click to expand...
Click to collapse
This is exactly what I'm doing. I use an older LG phone and the sim/IMEI then swap it to my u1 with AT&T fw after the device is provisioned.
jay2o01 said:
This is exactly what I'm doing. I use an older LG phone and the sim/IMEI then swap it to my u1 with AT&T fw after the device is provisioned.
Click to expand...
Click to collapse
Glad to know that works. I can pick up an old AT&T S6 pretty cheaply on ebay. Guess I'll give that a try. Thanks
Download visual voicemail from apk mirrow
jay2o01 said:
This is exactly what I'm doing. I use an older LG phone and the sim/IMEI then swap it to my u1 with AT&T fw after the device is provisioned.
Click to expand...
Click to collapse
I previously had an AT&T branded S8+ with the same SIM that I'm using in the unbranded S9+ but I guess I never provisioned (enabled) WIFI calling. Dunno.
The "trick" of giving them an IMEI from an ATT branded phone doesn't usually work any more, maybe it used to, years ago.
This is why I won't buy OnePlus phones any more. I love their devices, best bang for the buck on the market, but no amount of my fiddling would get ATT to recognize it and provision VoLTE... so no wifi calling, no HD calling... when you make a call, your data drops to 3G, etc...
My Essential, somehow was on their "BYOD" plan and so it would give me VoLTE and HD calling, but no wifi calling. No wifi calling is stupid, because you aren't using their network at that point, so why should they even care?
SquireSCA said:
The "trick" of giving them an IMEI from an ATT branded phone doesn't usually work any more, maybe it used to, years ago.
This is why I won't buy OnePlus phones any more. I love their devices, best bang for the buck on the market, but no amount of my fiddling would get ATT to recognize it and provision VoLTE... so no wifi calling, no HD calling... when you make a call, your data drops to 3G, etc...
My Essential, somehow was on their "BYOD" plan and so it would give me VoLTE and HD calling, but no wifi calling. No wifi calling is stupid, because you aren't using their network at that point, so why should they even care?
Click to expand...
Click to collapse
"maybe it used to, years ago"... That doesn't apply in this context does it as carrier features VOLTE and Wi-Fi calling weren't even in existence years ago. And I'm not sure you have to give them anything. The claim by some is that just provisioning the features with your SIM on a branded device is enough.
Stuart R said:
"maybe it used to, years ago"... That doesn't apply in this context does it as carrier features VOLTE and Wi-Fi calling weren't even in existence years ago. And I'm not sure you have to give them anything. The claim by some is that just provisioning the features with your SIM on a branded device is enough.
Click to expand...
Click to collapse
And as someone who has repeatedly tried it, it doesn't seem to work. You can give them an IMEI from another phone, but it usually doesn't work. Either the IMEI is "on their list", or from a phone that is on the BYOD list, or it isn't. It's not the phone's fault, it is that AT&T is kinda being dicks about this... They want you to buy their phones, because most people sign a contract to get the cheaper price, or use their NEXT financing to spread the costs out. That creates a barrier to exit for most customers and protects AT&T's revenue stream from monthly invoices.
While bringing your own device makes them just as much money from the monthly bill, it doesn't help them "retain customers by locking them into a contract", so they usually don't give you full functionality...
I have had a working SIM from an ATT branded phone that was properly provisioned, popped it into my other device, and VoLTE went away. I would call them up and give them the IMEI from the phone, or one that I know worked, and still no go. The one exception was the Essential, and that was because for whatever reason, Essential went to the effort to get it on their BYOD list.
Trust me, if it was easy, I would be doing it and buying OnePlus phones exclusively every 6 months and that would be the end of it. LOL
Are there any differences (Hardware like LTE, 5G Band differences or software differences) between AT&T and US Unlocked versions?
Hardware should be no difference. Radio bands should be the same. Software is different. The unlocked comes without carrier bloatware.
That is correct. The software is the only difference. I had the Samsung Note 10+ unlocked on AT&T. I couldn't get WiFi call or HD voice. This time I went the Note 20 Ultra AT&T version. Not a big deal. I just remove the bloatware from the phone using ADB. You can find articles on how to do it.
Weird that I was told by VZW that I couldn't wifi call on the unlocked version. But I can.
I had the U1 version on ATT. Worked great. Some menus missing, such as ability to choose VOLTE butncall quality was great. Has to call ATT to change to a 5g plan for 5g.
By the unlocked version, are you referring to the SM-N986B/DS? I am researching as well and I am on the AT&T network.
Edit: my bad misread title.
I had a U1 N10+ and as someone else mentioned, no wifi calling or HD Voice (VOLTE). Even flashing the U firmware. ATT typically has to Whitelist your phone to unlock those features. Running the U would unlock Video Calling (useless unless the other person is also on ATT) and Advanced Messaging (also an ATT only service). The day I got my N20Ultra, I popped my ATT activated sim, and no VOLTE / HD voice, and no wifi calling. Being on U1, the rest of the features weren't available (video calling, advanced messaging, vvm) which isn't surprising since it's debranded.
In another thread, it showed that Factory Unlocked N20Ultra will have HD Voice hut NOT wifi calling. That's fairly new, so YMMV. Saw the post earlier this week. Not sure it's it's live already or in the works. Some phones had support for WiFi calling and HD Voice, but the N20 series were showing only HD Voice at time of article.
I've since dumped att for Metro (Tmobile) for a few reasons, but primarily their reluctance for fully support a factory unlocked device. They are making a step in the right direction, but honestly, VOLTE and WiFi Calling should be standard features supported. Like why wouldn't you want me to call on wifi instead of clogging the wireless towers? Both work OOTB with Tmobile.
Edit: If you have no plans to switch carriers, I'd get it through att. Even if you run U1 for now, you can change your mind later and know all the features will work on U. If you buy factory unlocked, and need WiFi calling, there's no guarantee it'll work even if you load U firmware. In the past, the device has to have the IMEI specifically whitelisted on their end.
todd3835 said:
I had a U1 N10+ and as someone else mentioned, no wifi calling or HD Voice (VOLTE). Even flashing the U firmware. ATT typically has to Whitelist your phone to unlock those features. Running the U would unlock Video Calling (useless unless the other person is also on ATT) and Advanced Messaging (also an ATT only service). The day I got my N20Ultra, I popped my ATT activated sim, and no VOLTE / HD voice, and no wifi calling. Being on U1, the rest of the features weren't available (video calling, advanced messaging, vvm) which isn't surprising since it's debranded.
In another thread, it showed that Factory Unlocked N20Ultra will have HD Voice hut NOT wifi calling. That's fairly new, so YMMV. Saw the post earlier this week. Not sure it's it's live already or in the works. Some phones had support for WiFi calling and HD Voice, but the N20 series were showing only HD Voice at time of article.
I've since dumped att for Metro (Tmobile) for a few reasons, but primarily their reluctance for fully support a factory unlocked device. They are making a step in the right direction, but honestly, VOLTE and WiFi Calling should be standard features supported. Like why wouldn't you want me to call on wifi instead of clogging the wireless towers? Both work OOTB with Tmobile.
Edit: If you have no plans to switch carriers, I'd get it through att. Even if you run U1 for now, you can change your mind later and know all the features will work on U. If you buy factory unlocked, and need WiFi calling, there's no guarantee it'll work even if you load U firmware. In the past, the device has to have the IMEI specifically whitelisted on their end.
Click to expand...
Click to collapse
I spoke to AT&T for hours and they whitelisted my international Note20 Ultra IMEI. I still don't have Wi-Fi calling and they absolutely don't know why... I regret switching from T-Mobile to AT&T... but unfortunately have to stay with AT&T for 2 more years because of iPhone deals we got...
Guys, all you have to do is flash the U Home CSC for and you'll have all the features on ATT and still have U1 firmware on your U1 device. At least for me on this phone and two previous, the Samsung devices were already "whitelisted" with ATT
Can a US CSC be flashed to another snapdragon model, namely 9860?
ekerbuddyeker said:
Can a US CSC be flashed to another snapdragon model, namely 9860?
Click to expand...
Click to collapse
My guess is no .... But not sure
So if I have a at&t version and flash the u1 firmware would I have wifi calling?
jjr3211 said:
So if I have a at&t version and flash the u1 firmware would I have wifi calling?
Click to expand...
Click to collapse
No. If you're on the AT&T version, stay there.
I can't believe AT&T would whitelist all Samsung Unlocked devices, that would really surprise me. You can buy AT&T locked Galaxy phone and unlock it with AT&T since you bought it outright, and then of course it would be whitelisted.
Still Less Features for Factory Unlocked Models?
Read through this thread and tried digging around in all other logical forums and it seems that it's still the case that one cannot get WiFi calling on AT&T with a Factory Unlocked model?
Asking because Amazon is selling the Note 20 Ultra 512GB Factory Unlocked today for $1,200.
Found a Reddit thread that has people stating there will be a Samsung update that addresses this.
Have seen various posts in various places about flashing file(s)/ROM to enable this.
Any authoritative answer as to whether WiFi Calling (and Voice Over LTE) can be enabled on AT&T with a Factory Unlocked Note 20 Ultra? Or authoritative assurance it will, soon?
haroldlundt said:
Read through this thread and tried digging around in all other logical forums and it seems that it's still the case that one cannot get WiFi calling on AT&T with a Factory Unlocked model?
Asking because Amazon is selling the Note 20 Ultra 512GB Factory Unlocked today for $1,200.
Found a Reddit thread that has people stating there will be a Samsung update that addresses this.
Have seen various posts in various places about flashing file(s)/ROM to enable this.
Any authoritative answer as to whether WiFi Calling (and Voice Over LTE) can be enabled on AT&T with a Factory Unlocked Note 20 Ultra? Or authoritative assurance it will, soon?
Click to expand...
Click to collapse
They cannot. Att and att based subsidized carriers. Do not allow byod on votle or wifi calling. I have a trick to make it work for a couple hours. So I know its possible. But after a few hours their systems reprovision your device and shut them back off.
TheMadScientist said:
They cannot. Att and att based subsidized carriers. Do not allow byod on votle or wifi calling. I have a trick to make it work for a couple hours. So I know its possible. But after a few hours their systems reprovision your device and shut them back off.
Click to expand...
Click to collapse
Too bad. Thanks for the reply. Feel better about passing up the sale especially since it will probably be a common sale price during Xmas sales.
And WiFi Calling is too important a feature to trade for a discount of a hundred or even two.
haroldlundt said:
Too bad. Thanks for the reply. Feel better about passing up the sale especially since it will probably be a common sale price during Xmas sales.
And WiFi Calling is too important a feature to trade for a discount of a hundred or even two.
Click to expand...
Click to collapse
Yea. If you provision volte and wifi on a actual att phone and sim swap they work for a while. Usually around 4 or 5 am. Then it shuts off and never works again. Till sim swap and reprovision
VoLTE on unlocked Samsung S20 and Note20 series phones is set to "on" by default, but unchangeable (greyed out). As of right now, there is no ability to select WiFi calling until Samsung decides to grace those of us with unlocked phones that ability.
haroldlundt said:
Read through this thread and tried digging around in all other logical forums and it seems that it's still the case that one cannot get WiFi calling on AT&T with a Factory Unlocked model?
Asking because Amazon is selling the Note 20 Ultra 512GB Factory Unlocked today for $1,200.
Found a Reddit thread that has people stating there will be a Samsung update that addresses this.
Have seen various posts in various places about flashing file(s)/ROM to enable this.
Any authoritative answer as to whether WiFi Calling (and Voice Over LTE) can be enabled on AT&T with a Factory Unlocked Note 20 Ultra? Or authoritative assurance it will, soon?
Click to expand...
Click to collapse
There is a long term method but it involves calling att, and getting your IMEI registered so you can get VOLTE and wifi calling. Ask customer service. I can't remember the name of the department you need to request. It takes a couple of weeks and then you suddenly get a weird sms (something like IMEI provisioned) and then it works. Did it on note 9.