INCREASE SYSTEM PARTITION 1GB VIA CWM
ANNOUNCEMENT I:-LINK FIXED
ANNOUNCEMENT II:-STEPS UPDATED AS SOME POINTS WERE MISSING.NOW EVERYTHING FIXED.
ANNOUNCEMENT III:- THERE WILL BE NO ISSUES IF YOU FOLLOW STEPS CORRECTLY>THIS ZIP IS TESTED ON 3 DEVICES.
ANNOUNCEMENT IV:-507 MB & 880MB ZIPS ADDED.
Feature
System partition increased to 1gb
Internal memory is decreased to 66.82mb
No imei lost issue
No pc required
Click to expand...
Click to collapse
Downloads
1GB_CWM_A110Q
880MB_CWM_A110Q
507MB_CWM_A110Q
Click to expand...
Click to collapse
How to do:-
Put 1gb_cwm_a110q.zip in sd card.
Go to recovery and wipe data factory reset,wipe cache partition,format system,wipe dalvic cache.
Now go to install zip from sd and select 1gb_cwm_a110q.zip and install.
After finish update,install any new cwm flashable rom.
Now reboot after install finish.All done.Enjoy
If you facing bootloop then again go to recovery and do all steps like wipe data,wipe dalvic,format system,cache and then install new rom.It will surely work.(you will see cant mount cache in recovery,ignore that,it is one time show)
Same steps for 507MB and 880MB zip....
Click to expand...
Click to collapse
HOW I DID?
I EDITED EBRS WITH HEXA EDITOR WHICH WAS NOT TOO DIFFICULT AND THEN MADE CWM FLASHABLE ZIP WITH MY SCRIPT.
I will not be responsible for any damage to your device,do at your own risk.
Click to expand...
Click to collapse
TESTER- @vneogi199Helper @tech mashido
new updated link for 1 gb:- Download Download mirror
RESERVED
I followed all the steps u mention here ... But, after doing that my device getting bootloop ....
sawankumar2012 said:
I followed all the steps u mention here ... But, after doing that my device getting bootloop ....
Click to expand...
Click to collapse
I think you did steps before post updated.I updated the steps.Now do the steps from start and follow each steps carefully.Every step is required
and important.
do wipe data factory,cache,dalvic cache,foramt system
install my zip
install new rom directly
it will go to bootloop
now again go to recovery,it will say cant mount cache,dont panic,its normal.
Now do wipe data factory,cahce,dalvic,format system etc again and install new rom this time it will boot.
digyvijaykumar123 said:
I think you did steps before post updated.I updated the steps.Now do the steps from start and follow each steps carefully.Every step is required
and important.
do wipe data factory,cache,dalvic cache,foramt system
install my zip
install new rom directly
it will go to bootloop
now again go to recovery,it will say cant mount cache,dont panic,its normal.
Now do wipe data factory,cahce,dalvic,format system etc again and install new rom this time it will boot.
Click to expand...
Click to collapse
Yaap ! now it's working... And thank u for ur reply and many thanks for this great stuff ......
And plz post the porting guide & rom development guide for noobs as soon as possible... I'm very excited about it .....
sawankumar2012 said:
Yaap ! now it's working... And thank u for ur reply and many thanks for this great stuff ......
And plz post the porting guide & rom development guide for noobs as soon as possible... I'm very excited about it .....
Click to expand...
Click to collapse
He had already posted that. Check out his signature for link.
Do I have to flash this again and again for switching between roms which need partition... ?And BTW i dont know how to thank you for uploading the thing I needed the most...
sn0wbr33z3 said:
Do I have to flash this again and again for switching between roms which need partition... ?And BTW i dont know how to thank you for uploading the thing I needed the most...
Click to expand...
Click to collapse
No U just need to flash it once. Then flash any rom. U dont need to flash again while switching roms
Doubt
Hello dev...
Really more and more delightful with your all works... And this is again a great deal... Thanking you bro...
Just need to know when i should use 1gb or 880 mb or 508 mb partition? Is it depending on rom and how can i know which partion i should flash b4 installing any new custom rom. .. Plz help me to clear this doubt. ..
Thanking you again. ..
helldriv3r said:
Hello dev...
Really more and more delightful with your all works... And this is again a great deal... Thanking you bro...
Just need to know when i should use 1gb or 880 mb or 508 mb partition? Is it depending on rom and how can i know which partion i should flash b4 installing any new custom rom. .. Plz help me to clear this doubt. ..
Thanking you again. ..
Click to expand...
Click to collapse
For most roms which require system partition 880 MB is quite sufficient. If any rom requires 1GB partition, it will be specified in the OP or the instructions. If you will to revert back to original system partition, use the 507 MB one. For roms that dont require partition, 507 MB is enough.:good:
507 mb link not working
Hello dev. ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
507 mb file i need and whenever i m trying to open the dev host link no file found is thr. ... So plz upload the file its very needy now...
Thanking you dev
helldriv3r said:
Hello dev. ..
[/IMG]
507 mb file i need and whenever i m trying to open the dev host link no file found is thr. ... So plz upload the file its very needy now...
Thanking you dev
Click to expand...
Click to collapse
Link fixed
digyvijaykumar123 said:
Link fixed
Click to expand...
Click to collapse
can it work for Canvas hd ??
i think chd and c2+ share same erb
waiting for your reply bro
Darklord96 said:
can it work for Canvas hd ??
i think chd and c2+ share same erb
waiting for your reply bro
Click to expand...
Click to collapse
I am not sure but You can try,if something bad happens then drag your stock ebrs in zip and then follow same process to revert....
If this not worked then tell me i will create one specially for chd :good:
digyvijaykumar123 said:
I am not sure but You can try,if something bad happens then drag your stock ebrs in zip and then follow same process to revert....
If this not worked then tell me i will create one specially for chd :good:
Click to expand...
Click to collapse
gonna try it now bro
thanks for fast reply
revert back?
hello thanks for your work but can i revert back?
Bhg73 said:
hello thanks for your work but can i revert back?
Click to expand...
Click to collapse
Yes,you can use 507 MB zip to revert back..
hello diggy ...nice work as i alredy mentioned ...so now i need this facility in Micromax Colors2 A120 device ...can u help me for this ....??? plz reply ...
I get installation aborted. What's wrong?
archz2 said:
I get installation aborted. What's wrong?
Click to expand...
Click to collapse
-Do all steps carefully.
-use cwm recovery only.
-if none of above worked then try disabling signature verification from recovery.
Sent from my A110Q using Tapatalk
Related
CyB's Custom Rom for Xolo Q700
Description:
Today I had some free time, so I made this custom rom for Xolo q700 user. This rom is based on the latest update released from Xolo (24/7/13).I modified this rom little bit to improve the performance.
I planned to update more for this rom during my free times. If you have any suggestions, post it here.
Click to expand...
Click to collapse
Screen Shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Requirements:
Xolo q700 with CWM Recovery.
To root and install recovery:
http://tech2.in.com/how-to/smartphones/how-to-root-the-xolo-q700-and-flash-cwm-recovery/875454
Click to expand...
Click to collapse
Features:
Android 4.2.1 (Latest update from Xolo [24/7/13] )
Pre Rooted and Busybox installed.
Removed unwanted apps.
Tweaks to Improve the Performance.
Boot Screen Changed.
Deodexed (So you customize your mobile easily)
Init.d support by kernel
Custom Font.
All Google Apps Updated!
SuperSU Updated!
Xolo Apps Removed. (If you want, flash XoloApp.zip through recovery)
and more….
Want to customize more:
Use XPOSED framework:
http://forum.xda-developers.com/showthread.php?p=24267823
I tried it in this rom, it’s working well.
Gravity Box XPOSED module,
http://forum.xda-developers.com/showthread.php?t=2316070
Click to expand...
Click to collapse
Installation:
1. Download the Xolo q700 rom to sdcard.
2. Boot into recovery.
3. Wipe the data/factory reset.
4. Format the system (mounts and storage -> format system)
5. Flash the Xolo q700 rom.
6.Reboot.
Click to expand...
Click to collapse
Xolo Apps:
If you want Xolo apps,then flash XoloApps.zip through recovery.
Download:
http://www.cybapps.com/view.php?id=33
Don't mirror it.Download it from my website.
Credits:
Thanks to dsixda for this Kitchen.
Also thanks to all helpers.
svprm said:
CyB's Custom Rom for Xolo Q700
Description:
Screen Shots:
Requirements:
Features:
Installation:
Xolo Apps:
If you want Xolo apps,then flash XoloApps.zip through recovery.
Download:
http://www.cybapps.com/view.php?id=33
Don't mirror it.Download it from my website.
Credits:
Thanks to dsixda for this Kitchen.
Also thanks to all helpers.
Click to expand...
Click to collapse
Though I don't have the phone anymore, I really appreciate your work ..nice thing uploading 1st custom ROM.
Great work.
Best thing...it's deodexed.
I'll link it to official Q700 Xda thread
not a huge difference seems from stock rom.... only deodexing n battery icon changed... rest all things r same as stock.
drdogautam said:
not a huge difference seems from stock rom.... only deodexing n battery icon changed... rest all things r same as stock.
Click to expand...
Click to collapse
See if he added scripts or not
drdogautam said:
not a huge difference seems from stock rom.... only deodexing n battery icon changed... rest all things r same as stock.
Click to expand...
Click to collapse
i made this rom within a 3hours.So i can't able to add more features.But i will in free times.Now i have exams for three days.
@svprm All things okay but Both Sims can't find signal
Hope u will solve this issue for ur rom stability
svprm said:
i made this rom within a 3hours.So i can't able to add more features.But i will in free times.Now i have exams for three days.
Click to expand...
Click to collapse
i appreciate ur efforts... I know how much time consumed in a ROM development... it is not a easy job to make a new rom.... hope for a best rom (completely bug free) from ur side
---------- Post added at 02:27 PM ---------- Previous post was at 02:21 PM ----------
ur links r nor working...it shows
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!...
upload rom on 4shared or mediafire....
@proseray
Its working well on my phone and my friends phone.
Download problem:
Links updated!
Great!!! Nice to see the first custom rom available. Hope, we get to try out the latest versions of android, very little hope from Xolo to upgrade any further.
ravisghosh said:
Great!!! Nice to see the first custom rom available. Hope, we get to try out the latest versions of android, very little hope from Xolo to upgrade any further.
Click to expand...
Click to collapse
xolo, mmx, lava, karbonn etc r not supposed to upgrade their devices.. they use machines rather than mind, so they develop new device for upgraded version.... its all business.... i didn't heard any of these gave any upgrade.
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
new link also giving error of Access denied....
links given r not working... plz upload the rom on mediafire or 4shared.
does it support games data on SD card??
Congratulations on releasing the first custom ROM for the Xolo Q700. I am eagerly awaiting your next updates. I would love to see a solution to "Install to SD card" problem.
Thank you again.
svprm said:
CyB's Custom Rom for Xolo Q700
Description:
Screen Shots:
Requirements:
Features:
Installation:
Xolo Apps:
If you want Xolo apps,then flash XoloApps.zip through recovery.
Download:
http://www.cybapps.com/view.php?id=33
Don't mirror it.Download it from my website.
Credits:
Thanks to dsixda for this Kitchen.
Also thanks to all helpers.
Click to expand...
Click to collapse
Can u please add a google drive link..?
nice one;
Nice Rom, not much differ from stock though.
hope to see next update with extra features.
Has any one used this ROM thoroghly ?
Can any body please confirm that the ROM is working fine without any issues ?
Further I have a question, I understand that app are getting installed in internal memory, but why data related to apps also getting saved in internal memory. In all my previous adroids though my apps used to get installed on internal memory, data used to get stored in external SD card. Can anybody please throw some light ?
sachin.gokhale said:
Can any body please confirm that the ROM is working fine without any issues ?
Further I have a question, I understand that app are getting installed in internal memory, but why data related to apps also getting saved in internal memory. In all my previous adroids though my apps used to get installed on internal memory, data used to get stored in external SD card. Can anybody please throw some light ?
Click to expand...
Click to collapse
In your other phones, data was stored in external SD card cause you you chose Move to SD card option.
While in Q700, your internal memory is also your storage memory.
Hit thanks
coolprateek.kumar said:
In your other phones, data was stored in external SD card cause you you chose Move to SD card option.
While in Q700, your internal memory is also your storage memory.
Hit thanks
Click to expand...
Click to collapse
Thank you for the information, but what I am looking for is solution... Could you please help me with the solution ?
Sachin
sachin.gokhale said:
Thank you for the information, but what I am looking for is solution... Could you please help me with the solution ?
Sachin
Click to expand...
Click to collapse
This can be possible using INT2EXT Script.
Try this
http://forum.xda-developers.com/showthread.php?t=1716124
But you need to format your sdcard.
Do you have any suggestion for next version?
svprm said:
This can be possible using INT2EXT Script.
Try this
http://forum.xda-developers.com/showthread.php?t=1716124
But you need to format your sdcard.
Do you have any suggestion for next version?
Click to expand...
Click to collapse
I just check there is prerequisit of 110MBs internal memory for 500MB external SD card.... I have 32GB card... I do not the script is for me.
For next version , I would definately like to have apps to SD, !!!
sachin.gokhale said:
I just check there is prerequisit of 110MBs internal memory for 500MB external SD card.... I have 32GB card... I do not the script is for me.
For next version , I would definately like to have apps to SD, !!!
Click to expand...
Click to collapse
That not like that.
If you repartitioned your sdcard as 2 GB EXT,then you would need around 200MB internal memory.
Wining ROM In MIUI ROM PORTING CONTEST
ChangeLog
MIUI VERSION 4.5.28
Full MIUI Stock
Full New Optimized
Improve perfomance
Xperia Keyboard Added
Init.D Support & Tweaks
Zipalign
Kernal Tweaks
CPU TweaKs
Net Speed Tweaks
System tweaks
Build.Prop Tweaks
New Ram Managements
Battry Tweaks
New Deep Sleep Data Method (Improves Battry and Reduce Ram Usage)
Display Sharpness tweaks
Improve Sounds and Audio Quality
Fixed all Bugs
No delay in making calls
Dalvik VM tweaks
Rooted with Permission manager
Gapps included
Click to expand...
Click to collapse
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Download Link
Full ROM V 4.5.28
CLICK ME
Click to expand...
Click to collapse
Full ROM Flashing Instructions
1. Do factory reset
2. clear dalvik cache
3. clear cache data
4. Format System
5. Flash ROM.zip
6. Reboot
Click to expand...
Click to collapse
Bugs
NONE
U may report if found
Click to expand...
Click to collapse
Kernal: Stock
Version Information:Android 4.2.1
Status: Stable
Current MIUI Version:4.5.28
Last Updated 2014-05-28
Click to expand...
Click to collapse
New ota 4.1.13 uploaded .. u can install manually from first post or automatically from ur phone updater app
Please vote for india here
http://en.miui.com/thread-13283-1-1.html
new version 4.1.27 updated
WoW... But...
Absolutely amazing rom
just if the unwanted apps were removed it would be the best one till date..
downside is fps on this rom is only 46fps
currently uninstalling rom..
hope to see the unnecessary apps removed in next update:highfive::fingers-crossed:
New OTA 4.2.6 Uploaded
download from the 1st post or update Via OTA updater from the phone
Changelog in1st post
Javajohn said:
New OTA 4.2.6 Uploaded
download from the 1st post or update Via OTA updater from the phone
Changelog in1st post
Click to expand...
Click to collapse
Thanks
things better but
Nenamark 2 giving 41.9fps
Will u provide 4.2.18 for this one as well then I will wait or should I d/l this one?
Gauraav said:
Will u provide 4.2.18 for this one as well then I will wait or should I d/l this one?
Click to expand...
Click to collapse
yes my all roms update i provide
wait till tommorrow please
Javajohn said:
yes my all roms update i provide
wait till tommorrow please
Click to expand...
Click to collapse
Thanks bro!! Will wait for updated ROM.
Can you please consider mediafire or dev host as uploading site, as mega is a pain for me and I usually download every update of your rom.
I hope you consider this.
Thanks in advance.
Sent from my Canvas Magnus using Tapatalk
droid-devz said:
Can you please consider mediafire or dev host as uploading site, as mega is a pain for me and I usually download every update of your rom.
I hope you consider this.
Thanks in advance.
Sent from my Canvas Magnus using Tapatalk
Click to expand...
Click to collapse
Tommorow will be new update 4.2.18 and it will be uploaded on miui official server
New version 4.2.18 ..added
Javajohn said:
Tommorow will be new update 4.2.18 and it will be uploaded on miui official server
Click to expand...
Click to collapse
thanks a lot for such a great support..
thanks for all the effort you put, i have issue with installation.
I downloaded "miui_a117_javajohn_4.2.18_c8e3a6f79b_4.2" rom from miui india official site, i was running lewa5, and i did all the steps for installation as you mention.
But my phone is stuck in boot loop i think(initial micromax M! logo ). I tried it multiple time but still same.
How long does it take to boot for the first time? is there anyway to fix it? any tips about how to check what could be the issue. I don't know much about debugging and all adb stuff but i can follow steps and all.
EDIT:
i get following message will doing reset,
"no app2sd partition found. skipping of /sd-ext"
I don't know if its anything to do with that.
naifdamudi said:
thanks for all the effort you put, i have issue with installation.
I downloaded "miui_a117_javajohn_4.2.18_c8e3a6f79b_4.2" rom from miui india official site, i was running lewa5, and i did all the steps for installation as you mention.
But my phone is stuck in boot loop i think(initial micromax M! logo ). I tried it multiple time but still same.
How long does it take to boot for the first time? is there anyway to fix it? any tips about how to check what could be the issue. I don't know much about debugging and all adb stuff but i can follow steps and all.
EDIT:
i get following message will doing reset,
"no app2sd partition found. skipping of /sd-ext"
I don't know if its anything to do with that.
Click to expand...
Click to collapse
Check if your Downloaded package is fine, sometimes it can be the issue..
We can check it by comparing MD5 unfortunately on mega its not possible.
Another thing, do factory reset and than wipe delvink cache. Then do to mount and storage from there.
format /system
/cache
/data
There is no sd ext partition in your sd card that's why it skip that.
Install package and boot up..
I want to share a problem regarding call volume when using headphones and playing music.
It's a very critical bug, when somebody calls me while m listening to music call volume is very low, many times my mic also do not work (headphone).
Please fix it.
Sent from my Micromax A117 using Tapatalk
droid-devz said:
Check if your Downloaded package is fine, sometimes it can be the issue..
We can check it by comparing MD5 unfortunately on mega its not possible.
Another thing, do factory reset and than wipe delvink cache. Then do to mount and storage from there.
format /system
/cache
/data
There is no sd ext partition in your sd card that's why it skip that.
Install package and boot up..
Click to expand...
Click to collapse
i assume if zip file extract properly without any CRC errors usually means file is intact and same as original.
Is there any initial criteria for installing this rom? like i said i was running Lewa5 then i wanted to try miui. Right now i'm running "Tweaked Deodexed [Stock ROM] Micromax A117 Rom Ver.1.0 [16-2-14]" and with this i tried again, same issue, stuck in boot loop.
thanks for response anyway, I really like miui, i'm running miui on my xolo q700 right now.
I am currently on MIUI 4.2.6 and my OTA updater is not detecting 4.2.18, do i need to download and flash the whole ROM again or will the 4.2.18 available via system update in future?
Can the Chinese text in MIUI Rom be translated or removed?
naifdamudi said:
i assume if zip file extract properly without any CRC errors usually means file is intact and same as original.
Is there any initial criteria for installing this rom? like i said i was running Lewa5 then i wanted to try miui. Right now i'm running "Tweaked Deodexed [Stock ROM] Micromax A117 Rom Ver.1.0 [16-2-14]" and with this i tried again, same issue, stuck in boot loop.
thanks for response anyway, I really like miui, i'm running miui on my xolo q700 right now.
Click to expand...
Click to collapse
Bro even I face bootloops after flashing this ROM then I msg @Javajohn regarding he said just replace ur stock boot.img and then flash again but I did not try it till now coz of time issue. Just try it and hopefully it will boot this time.
---------- Post added at 10:21 PM ---------- Previous post was at 10:11 PM ----------
pushpak888 said:
I am currently on MIUI 4.2.6 and my OTA updater is not detecting 4.2.18, do i need to download and flash the whole ROM again or will the 4.2.18 available via system update in future?
Can the Chinese text in MIUI Rom be translated or removed?
Click to expand...
Click to collapse
Yes u have to d/l the whole rom again to be on 4.2.18 now we can expect 4.2.21 from @Javajohn anytime but need to fix this boot loops for this rom first.
Gauraav said:
Bro even I face bootloops after flashing this ROM then I msg @Javajohn regarding he said just replace ur stock boot.img and then flash again but I did not try it till now coz of time issue. Just try it and hopefully it will boot this time.
---------- Post added at 10:21 PM ---------- Previous post was at 10:11 PM ----------
Yes u have to d/l the whole rom again to be on 4.2.18 now we can expect 4.2.21 from @Javajohn anytime but need to fix this boot loops for this rom first.
Click to expand...
Click to collapse
I wonder why problem exit in first place. I mean i'm sure it work for other people here.
Anyway, i don't understand what you mean exactly, do you mean to say replace boot.img after flashing miui with stock firmware boot.img? or replace boot.img before flashing miui if so replace with which boot.img?
[CUSTOM KK ROM] - MIUI 4.11.28
MIUI V5 (4.11.28) Kitkat based
With all other MIUI features
Rest find urself
HOW TO INSTALLUse custom KK recovery from here.
I prefer [CWM Advanced Edition] PhilZ Touch 6.57.9 - cwm 6.0.5.1.
(Internal sd-card refereed as sdcard00, external as sdcard01)
Download rom zip file.
Put into sd card.
Flash the desired recovery.
Boot into recovery.
BACKUP CURRENT ROM
Wipe for flash of new rom.
Or wipe data/system/delvic cache/cache.
Select Install From SD (Internal or External)
Select the zip file and Select YES
Reboot.
THINGS TOBE NOTED
First boot takes time 3-5 mins so be patient.
After first boot there is a setup wizard
just complete it, dont bother what is it and why it is there
Also ignore any fc.
After complete first boot one reboot is recommended.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:-
@yavuz21
needrom.com
4pda network.
Please note:-
I didnt get much time to go through the ROM fully.
Please upload some more screenshots and reviews with features - working and not working.
There was issue with camera app of base rom (only 8 MP camera) so i replaced it with stock camera, thats why u getting two different gallery icons - MIUI gallery and stock gallery.
DOWNLOAD LINKAfter download please open the Q3K miui kk final.zip with winrar/winzip. Goto system/media folder.
just delete bootanimation.zip flash this zip.
OR flash above file and immediately flash attached zip file. thanks to @aaayush_singh & @rohitsinghpu
Whoa.. Its here finally.. Provide the link please sir ji.. :cyclops:
Aftab Memon said:
Whoa.. Its here finally.. Provide the link please sir ji.. :cyclops:
Click to expand...
Click to collapse
download link is up.:good::good:
enjoy.
Downloading..
dear avi...
finally u made it....
cheers....
best wishes...& lot of thanxsssss...for ur efforts...
Aftab Memon said:
Downloading..
Click to expand...
Click to collapse
SPG30759 said:
dear avi...
finally u made it....
cheers....
best wishes...& lot of thanxsssss...for ur efforts...
Click to expand...
Click to collapse
Anyone able to boot the rom.
2 users stuck at boot animation. (first boot always takes longer time but still...)
If anyone boots properly please reply soon.
I flashed this on two different handsets and able to boot properly.
Stucking.....
Dude....
stucking on first boot.....
Medicine please.....
avi3230 said:
Anyone able to boot the rom.
2 users stuck at boot animation. (first boot always takes longer time but still...)
If anyone boots properly please reply soon.
I flashed this on two different handsets and able to boot properly.
Click to expand...
Click to collapse
same here
i am also stuck on boot
tried multiple times with Philz, Carliv as well as TWRP with no luck.
Flashed thrice.. Waiting for the home screen.. Stuck in the boot .. Cant start up
Things doesn't seems to be turn good.. Still the same problem.. Tried thrice with both the patches.. Getting nowhere
Aftab Memon said:
Things doesn't seems to be turn good.. Still the same problem.. Tried thrice with both the patches.. Getting nowhere
Click to expand...
Click to collapse
same result here
found a fix
avi3230 said:
Anyone able to boot the rom.
2 users stuck at boot animation. (first boot always takes longer time but still...)
If anyone boots properly please reply soon.
I flashed this on two different handsets and able to boot properly.
Click to expand...
Click to collapse
Hey, did you read the q&a section, I found a fix and posted it there. Unfortunately I didn't have 10 posts that time, so couldn't post here....now I've got 10 posts so I posted it here.
The problem is with bootanimation file, so I replaced it with one from another ROM. Please read the q&a section of this ROM for the details....
http://forum.xda-developers.com/q3000/help/qa-miui-4-11-28-t3013564
I used the ROM just fine. However there was some problem with downloading apps from play store.
Please press thanks if you find this useful
aaayush_singh said:
Hey, did you read the q&a section, I found a fix and posted it there. Unfortunately I didn't have 10 posts that time, so couldn't post here....now I've got 10 posts so I posted it here.
The problem is with bootanimation file, so I replaced it with one from another ROM. Please read the q&a section of this ROM for the details....
http://forum.xda-developers.com/q3000/help/qa-miui-4-11-28-t3013564
I used the ROM just fine. However there was some problem with downloading apps from play store.
Please press thanks if you find this useful
Click to expand...
Click to collapse
will try tomorrow and post results
after changing the bootanimation.zip file ,miui rom install ,beautiful rom, great work avi sir
aaayush_singh said:
Hey, did you read the q&a section, I found a fix and posted it there. Unfortunately I didn't have 10 posts that time, so couldn't post here....now I've got 10 posts so I posted it here.
The problem is with bootanimation file, so I replaced it with one from another ROM. Please read the q&a section of this ROM for the details....
Click to expand...
Click to collapse
rohitsinghpu said:
after changing the bootanimation.zip file ,miui rom install ,beautiful rom, great work avi sir
Click to expand...
Click to collapse
Thanks for trying and providing a solution.
So changing bootanimation works finally.
So i suggest to just delete it.
Open the zip in winrar/winzip
goto system/media
just delete bootanimation.zip
flash this zip.:good::good:
avi3230 said:
Thanks for trying and providing a solution.
So changing bootanimation works finally.
So i suggest to just delete it.
Open the zip in winrar/winzip
goto system/media
just delete bootanimation.zip
flash this zip.:good::good:
Click to expand...
Click to collapse
avi sir i change the bootanimation file of previous miui rom with this one, thats work fine
---------- Post added at 11:53 AM ---------- Previous post was at 11:49 AM ----------
avi sir, its a humble request to you,why are you creating new rom,why don't you create one rom with all the best features of the different roms, so the best rom comes
avi3230 said:
Thanks for trying and providing a solution.
So changing bootanimation works finally.
So i suggest to just delete it.
Open the zip in winrar/winzip
goto system/media
just delete bootanimation.zip
flash this zip.:good::good:
Click to expand...
Click to collapse
But there are a few other problems. Play store crashes, was unable to download anything from play store.
There was no preinstalled browser, so I had to switch back rom.
Network strength for 1 Sim is only shown (that's bad)
Please fix the play store thing if that's possible.(I was using WiFi for downloading from play store, didn't try packet data)
aaayush_singh said:
Hey, ....
Please press thanks if you find this useful
Click to expand...
Click to collapse
U can also do the same on the rom threads
Didn't. Work for me .. Tried. Thrice.. Deleted. The boot img file too
Aftab Memon said:
Didn't. Work for me .. Tried. Thrice.. Deleted. The boot img file too
Click to expand...
Click to collapse
It wont work if u delete boot.img.
Till monday I will upload working backup of miui so u can restore it.
Color OS V 2.0.1i kitkat
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR ROM
VISIT HERE
CREDITS
OROCHI & Paclix
Pinto And Amit ( Special Thanks )
Me (for porting and bug fixing )
Dont Just SAY Thanks ...HIT thanx
XDA:DevDB Information
Color OS v2.0.1i , ROM for the Micromax Canvas 2 Plus A110Q
Contributors
sanyam123
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Current Beta Version: 2.0.1
Beta Release Date: 2015-05-02
Created 2015-05-02
Last Updated 2015-08-26
Screenshots...
Looks good.. Downloaded may try..
ginzon said:
Looks good.. Downloaded may try..
Click to expand...
Click to collapse
I m sure... u will like it...
The link is dead.... I am nt able to download
u_knw_who said:
The link is dead.... I am nt able to download
Click to expand...
Click to collapse
I downloaded all the rules, but one problem is that I found it clean and it hangs on boot logo and nothing else ((
I live in Ukraine
plain English so good know
Bro I currently have 800 mb partition... So if I want to have 1 gb partition, do I have to flash the stock rom again and then do the partirion? Or is there any other way of doing it?
u_knw_who said:
The link is dead.... I am nt able to download
Click to expand...
Click to collapse
Bro ...link is working ..many have downloaded ..and using the rom
orlov.oleg16 said:
I downloaded all the rules, but one problem is that I found it clean and it hangs on boot logo and nothing else ((
I live in Ukraine
plain English so good know
Click to expand...
Click to collapse
bro u should have 1GB partition not 880 only 1GB ...search A110Q system partition in google and there is one digyvijay123 thread providing Flashable Partition Zip....
u should flash it and then flash this rom...
amitm20 said:
Bro I currently have 800 mb partition... So if I want to have 1 gb partition, do I have to flash the stock rom again and then do the partirion? Or is there any other way of doing it?
Click to expand...
Click to collapse
No bro... U have to Download Flashable
check this out
forum.xda-developers.com/micromax-canvas-2/development/1gb-increase-partition-t2719547
Follow all the procedure given in this ...then Flash rom...
sanyam123 said:
No bro... U have to Download Flashable
check this out
forum.xda-developers.com/micromax-canvas-2/development/1gb-increase-partition-t2719547
Follow all the procedure given in this ...then Flash rom...
Click to expand...
Click to collapse
Ohh great... I'll check that out... Thanks for your help...
sanyam123 said:
bro u should have 1GB partition not 880 only 1GB ...search A110Q system partition in google and there is one digyvijay123 thread providing Flashable Partition Zip....
u should flash it and then flash this rom...
Click to expand...
Click to collapse
I have it for a long time flashed on the extension of the system memory on 1GB
orlov.oleg16 said:
I have it for a long time flashed on the extension of the system memory on 1GB
Click to expand...
Click to collapse
then its gr8 '' if u having...if u r not then Do it once again to feel the xperience of colorOS
amitm20 said:
Ohh great... I'll check that out... Thanks for your help...
Click to expand...
Click to collapse
ur welcome bro...
sanyam123 said:
then its gr8 '' if u having...if u r not then Do it once again to feel the xperience of colorOS
Click to expand...
Click to collapse
still does not want to cut one more time, I made an extension but is still hanging on the logo and everything can even send a photo like that hanging is already 10 minutes
orlov.oleg16 said:
still does not want to cut one more time, I made an extension but is still hanging on the logo and everything can even send a photo like that hanging is already 10 minutes
Click to expand...
Click to collapse
it means u haven't partitioned properly follow every step carefully...
sanyam123 said:
it means u haven't partitioned properly follow every step carefully...
Click to expand...
Click to collapse
Thanks it worked forgotten about formatting system
I usually do not use it
orlov.oleg16 said:
Thanks it worked forgotten about formatting system
I usually do not use it
Click to expand...
Click to collapse
ohh.. No problem ... Rom Successfully Flashed,, which is the main thing. .
sanyam123 said:
ohh.. No problem ... Rom Successfully Flashed,, which is the main thing. .
Click to expand...
Click to collapse
I myself wanted to portanut the Turks but not when it was working all day and still do a diploma
orlov.oleg16 said:
I myself wanted to portanut the Turks but not when it was working all day and still do a diploma
Click to expand...
Click to collapse
Bro...cant understand what u r saying
Link: http://droidsans.com/node/184785
Test: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ขอบคุณ. CREDITS TO
@@thanhfhuongf ([ROM 5.0.2]Aurora-N900-Full-G9200-Port-No.2.3)
@Albe95 (For The Icons,and app port)
Is working on N 9005 as well ?
Hi, this rom is by someone else and before posting it here in xda, i think first you have to ask the developer and then after mentioning credits post it...
ok...thanks.
nimish77 said:
Hi, this rom is by someone else and before posting it here in xda, i think first you have to ask the developer and then after mentioning credits post it...
Click to expand...
Click to collapse
รอมนี้ผมโมดิฟายเอง จาก L23 by Dr.Ketan เข้าใจตรงกันนะ
androidguy97 said:
Is working on N 9005 as well ?
Click to expand...
Click to collapse
For N900
How to install this???
cheer cheer cheer
---
แอบมาให้กำลังใจแล้วน่ะ รู้ยัง ^^
ปล. คงต้อง how to วิธีติดตั้งเป็น english ด้วยล่ะ
----
Huyngoc
Bootloooooooop on N900
huyngoc said:
Bootloooooooop on N900
Click to expand...
Click to collapse
Hi, this rom worked for me in cwm and twrp both.... If u are ok kitkat then first get the lollipop bootloader.
1. factory reset/clear cache
2.clear dalvik cache in advanced (for cwm recovery)
3. in mounts and storages option, format system and format data and then flash this rom, 100% working
aki2008 said:
cheer cheer cheer
---
แอบมาให้กำลังใจแล้วน่ะ รู้ยัง ^^
ปล. คงต้อง how to วิธีติดตั้งเป็น english ด้วยล่ะ
----
Click to expand...
Click to collapse
ดีใจหลาย.. อิอิ
cant figure proper way to flash this rom.
nimish77 said:
Hi, this rom worked for me in cwm and twrp both.... If u are ok kitkat then first get the lollipop bootloader.
1. factory reset/clear cache
2.clear dalvik cache in advanced (for cwm recovery)
3. in mounts and storages option, format system and format data and then flash this rom, 100% working
Click to expand...
Click to collapse
can you please describe the right process to flash thi rom.first of all i didnt get zip file.file provided in first link which size is 1.52gb it is in rar format and secod file provided for fix is 198(may be) mb..
whic one to flash and how...
.
.
.
plz help me out how to flash thi rom?
thanks in advance.
cricpunk said:
can you please describe the right process to flash thi rom.first of all i didnt get zip file.file provided in first link which size is 1.52gb it is in rar format and secod file provided for fix is 198(may be) mb..
whic one to flash and how...
.
.
.
plz help me out how to flash thi rom?
thanks in advance.
Click to expand...
Click to collapse
ohk, i understood what u did ,
that file u downloaded is not meant to be flashed. the file contains the rom and some other files so extract it and flash the N900_Note5.zip inside the N900_Note5 folder and no need of other files like n3 camera or something for the rom..
huyngoc said:
Bootloooooooop on N900
Click to expand...
Click to collapse
https://mega.co.nz/#!qtogyYjR!QKm3sN9JA-oZSoxRBRcPZiTlb4Yew9cNPRBxTGQw9dk
nimish77 said:
ohk, i understood what u did ,
that file u downloaded is not meant to be flashed. the file contains the rom and some other files so extract it and flash the N900_Note5.zip inside the N900_Note5 folder and no need of other files like n3 camera or something for the rom..
Click to expand...
Click to collapse
Thanks for reply
when i try to flash that extracted zip it said aborted????
where i am doing wrong??
Appreciate your help
cricpunk said:
Thanks for reply
when i try to flash that extracted zip it said aborted????
where i am doing wrong??
Appreciate your help
Click to expand...
Click to collapse
i hope you are trying to flash this on n900, not n9005 and i have tested this rom several times and it always worked with cwm, twrp and multiboot.
nimish77 said:
i hope you are trying to flash this on n900, not n9005 and i have tested this rom several times and it always worked with cwm, twrp and multiboot.
Click to expand...
Click to collapse
finally successfully flashed rom.isnt this room setting is of s6?
i want list view setting how to do tha?
Please someone test this rom for N900.
& Full theme working or not?
Sent from my SM-G920F using XDA Free mobile app
anuprode09 said:
Please someone test this rom for N900.
& Full theme working or not?
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
tested the rom and there is no full theme support from the theme store directly ... only the icons, wallpaper and icons change and for full theme support u can flash tyhe files of s6 themes into ur overlay folder
---------- Post added at 05:00 PM ---------- Previous post was at 04:58 PM ----------
cricpunk said:
finally successfully flashed rom.isnt this room setting is of s6?
i want list view setting how to do tha?
Click to expand...
Click to collapse
the rom is completely based on s6 and s6 edge features and the current version just has note 5 icons so the settings and everything is based on s6.
Can anyone upload video of this ROM? Thanks
EDGE+ Wallpaper Update