Has anyone met the problem with Motorola Droid Xyboard 8.2, 609-32 (US Verizon) after it was update to 4.1.2 by air. Namely, when the procedure was finished it stuck on boot (after logo) - black screen with backlight. I tried to do hard reset using Boot Mode Selection Menu (power button + volume up and down) but still after factory reset it wont prolong with booting past logo.
If someone can help solving the problem i would be grateful. Unfortunately i am not able to provide any kind of official service in Motorola. And if someone can try to explain how to do it using my own hands (step-by-step) - i would appreciate. Thank You beforehand, i will accept any answer - positive or negative, but hope someone find couple of minutes.
Related
Today I tried to install Gingerbread 2.3 to my Milestone 2 (Droid 2) and the attempt was a severe failure. Tried Hard Reset. Unable to do it. ยด
Can anyone say me how to recover from Rom Manager (But unfortunately not able to get my mobile started)
When ever I try to hard reset all I see is fickering of Moto logo just once on the screen and thats it. then the screen remains blank after that.
However, finally pressed the home+camera+volume down+power
and its showing
Bootloader 70.12
Battery OK
OK to Program
Transfer Mode: USB
Have no idea what it means or wat to do. Totally new to rooted phone applications.
Could you plzzz help me out.
Any tips?
I am really frozen. Just a couple of weeks old.
I googled a lot of options. Everything was a failure.
Desperately searching for help!
After i used "basebandswitcher V4 multilanguage V0.6 (07.06.2011)"
on my XT720 my device is stuck in an endless Boot screen loop. Here's a list of things i have tried thus far to no avail:
Go into recovery mode and:
-Clear Cache
-data/factory reset
Flash Rom with RSD Lite with 3 different versions:
-Cincinnati Bell TR_U2_04.1E.1
-Korean Motoroi XT720 2.2
-UK_STR_U2_01.1E.0
Boot Phone without SD Card
Pull out battery for 24hrs and boot phone(with and without SD Card)
I'm not sure if theres a way to get into the phone's files to try and change them because I'm sure that on boot it tries to boot but when it tries to enable the phone modem it has an internal error. On the device screen the only thing i get is the black background with the white "M" Motorola logo in the center. The screen then shuts off and restarts the "M" logo.
So what I'm wondering is if anyone has any other ideas to give me to try. I'm definitely not a veteran with the Android Platform and I've only had the phone for a fiew weeks but i can figure pretty much anything out (usually)
To everyone willing to help, thanks allot.
Jacques Cronier
to the top
bumping myself for help
bumping for help, i have same issue.
Got same problem. It happened after I took a picture. Any idea ?
Hello,
I'm new to the community. I generally work on PC but a friend brought me this Samsung Galaxy tab 7.0 Plus that turns on but is stuck at the "Samsung Galaxy tab 7.0 Plus" splash screen when it first turns on. I have tried the" Power+Vol up" to reset to factory but it seems to go too-quickly and then I am back to square one because nothing changed. I dont know if my friend or his kids tried to do anything crazy with this so I don't have much more info.
What I am asking... I want to get this tab back to factory, or at least a working ROM. any advice is helpful but please keep in mind I have never really worked on these devices, the one thing I do know is if I jump to conclusions I can brick the device.
Thanks in advance. If more info is needed please ask.
did you try with a retore power + vol down with Odin
http://www.sammobile.com/firmware/?page=3&model=GT-P6210&pcode=XAR&os=1&type=3#firmware
choose between 3.2 honeycomb or 4.0.4 ICS
I got the same problem before !!!
http://forum.xda-developers.com/showthread.php?t=1827942
There is my solution
I had a very similar problem to both of you and noticed that the /data (instead of /efs) directory/partition "didn't exist" according to the boot screen when i entered the default recovery mode. i partitioned it and ran a factory reset and it finally booted.
and all just in time to pull the factory US ICS update
Hi,
The issue began all of a sudden and I don't know what caused it.
The issue is that when I power the device on, it gets stuck at the ASUS logo indefinitely and doesn't go beyond that.
To sort this issue out, I searched online and figured that I need to re-flash my firmware.
I might have re-flashed a wrong firmware because now I cannot even enter the droid boot (initially I was able to do that).
So now when I press the power and volume up keys together, the android guy appears for a second and then a white bar with a usb sign appears.
So now the issue is that:
I'm stuck on the ASUS logo whenever the device is switched on AND I cannot enter droid boot because a USB sign with a white bar appears.
What am I supposed to do now? Please explain it to me in detail.
Have I hard brick my device? Or Is it a motherboard issue?
I'm a complete noob when it comes to these things but these terminologies are scaring the hell out of me.
Kindly help me!!
Thread closed, OP reposted
http://forum.xda-developers.com/fonepad-7/help/asus-fonepad-7-stuck-logo-issue-t3471579
My pixel had been restarting frequently for past 2 days. I am using Stock android 7.1.1. It suddenly went into a boot loop with white screen with Google flashing every 2 seconds. Power plus volume down helps but when I select recovery, it again keeps blinking. volume up doesn't help either. Cannot get into recovery to do a reset. I am okay with hard reset if I have to do one. I can't get it replaced right away as I am not in the country I got it from right now. Please help me out.
I have the same issue. I haven't found a fix. Someone recommended to unlock the bootloader on a previous thread, but I'm not sure how I would do that when not able to get into recovery mode.