Would it be possible to run a portable usb OS, such as Linux on this tablet,by using the usb port in the dock?
Sent from my LG-E975 using xda app-developers app
steffenbakke said:
Would it be possible to run a portable usb OS, such as Linux on this tablet,by using the usb port in the dock?
Click to expand...
Click to collapse
You can run Linux from USB storage, but you can't boot directly from it.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Related
Hi all,
this morning I tried to connect my LG optimus 2X to my transformer dock, but the transformer doesn't recognize the phone (it's set to mass storage device).
A usb pen disk works perfect.
Do you know how I can solve it?
Many thanks!
Are you sure that the TF has got android usb drivers installed? xD
Sent from my GT-I9000 using XDA App
Paramet3r said:
Are you sure that the TF has got android usb drivers installed? xD
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Android usb drivers for android?
Where can I get them? xD
Hey guys,
Since I cannot post in the developer section where it belongs, I'll put it up here for people to see.
If you're trying to root your device with the debugfs method, don't use a USB 3 port. Windows 7 recognised the device, installed the drivers successfully, but I couldn't get past the "daemon started successfully" message in the debugfs tool. Changing the port to the USB 2 and Windows installed the drivers for adb. The rooting with version 1.9 was without problems from there one.
I thought this info might be useful to some of you
Sent from my ASUS Transformer Pad TF700T using xda premium
I used my USB 3.0 ports just fine.
Ok, good to know. I used a Asus Zenbook (UX31E) and couldn't get usb3 working, so I might not be the only one
Sent from my ASUS Transformer Pad TF700T using xda premium
hillbicks said:
Ok, good to know. I used a Asus Zenbook (UX31E) and couldn't get usb3 working, so I might not be the only one
Sent from my ASUS Transformer Pad TF700T using xda premium
Click to expand...
Click to collapse
oops deleted
I was gonna say, apart from the fact that ultrabooks are not even in this list, the arguments against it are not very sophisticated. But enough of that
Sent from my ASUS Transformer Pad TF700T using xda premium
My question is there a step by step guide for this?
Sent from my SCH-I535 using xda app-developers app
iampedro said:
My question is there a step by step guide for this?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Check the rooting thread in the development forum
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Hi im kinda new here , i wana know is there any way that i can use my ntfs hdd hard drive [500gb] in my tab plus?
when i pluge it into tab it says high power usb connected ... and a [!] Simbol
sorry for bad eng...
Sent from my GT-P6200 using Tapatalk 2
I just mounted a 2TB HDD but with an external power Source. Size is not the problem, but without a external powersource, u will need a USB Y cable. Plug the single end into your tab, the other two are to connected with a powersource (battery with usb or just into your tablet charger) and your hdd. Done
Sent from my GT-P6200 using xda app-developers app
Bad2hold said:
I just mounted a 2TB HDD but with an external power Source. Size is not the problem, but without a external powersource, u will need a USB Y cable. Plug the single end into your tab, the other two are to connected with a powersource (battery with usb or just into your tablet charger) and your hdd. Done
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
Thanks for answering friend ...
Was it NTFS or FAT32 ?
did you use any usb managering app?
Sent from my GT-P6200 using Tapatalk 2
NTFS of course... but i think its capable of mounting every format if running extetnal via usb dongle. If you are on stock, your tab should recognize the new data source automaticallly. If not, use *stickmount* from chainfire in the play store. (Root required)
Sent from my GT-P6200 using xda app-developers app
Bad2hold said:
NTFS of course... but i think its capable of mounting every format if running extetnal via usb dongle. If you are on stock, your tab should recognize the new data source automaticallly. If not, use *stickmount* from chainfire in the play store. (Root required)
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
I have a Y usb cabl that have 2 normal usb 2.0 head and one head with micro usb 2.0 for my hard drive ...
what should i do with otg cabl ?
Sent from my GT-P6200 using Tapatalk 2
Just plug it into your hard drive, the other end goes into your tab. That one whats left goes into a usb port with powersource. (Your tablet charger or an iphone charger. For travelling i use a external battery with usb output.) Could not be easier dude...
Sent from my GT-P6200 using xda app-developers app
Bad2hold said:
Just plug it into your hard drive, the other end goes into your tab. That one whats left goes into a usb port with powersource. (Your tablet charger or an iphone charger. For travelling i use a external battery with usb output.) Could not be easier dude...
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
This way i can use usb otg and charging in the sametime?
Sent from my GT-P6200 using Tapatalk 2
ali.cheeta said:
This way i can use usb otg and charging in the sametime?
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
The powersource is to power your hard drive, not the tab
necrohades said:
The powersource is to power your hard drive, not the tab
Click to expand...
Click to collapse
But my hdd doesnt have adaptor...
Sent from my GT-P6200 using Tapatalk 2
ali.cheeta said:
But my hdd doesnt have adaptor...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Same mine..i hav a same question too..hdd devide by two..one can directly connect to laptop(no need adapter), the other one need adaptor to turning it on..so mine is the 1st one, that no need adaptor..so can i just directly connect to otg cable or i must use y cable?
...~...~...~...~...~...~...~...~...~...~...~...~...~...
Xperia X8
Xperia Mini Pro
Xperia Neo
Galaxy W
Xperia Play
Xperia U
Galaxy SII G
Galaxy Tab 7 Plus
Sent from my GT-P6200 using XDA Premium
ali.cheeta said:
But my hdd doesnt have adaptor...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
So you have to buy one. A modern laptop can provide enough to make the hd work, this tab can't.
leodfs said:
So you have to buy one. A modern laptop can provide enough to make the hd work, this tab can't.
Click to expand...
Click to collapse
I have read that this tab can handle allover the net and u r telling me this ?
Sent from my GT-P6200 using Tapatalk 2
Don't think so buddy. With the symptoms you have described on the OP, the only way you can get it to work is with a power cord extension.
It's is not even a guaranteed method, and if you don't take real care with the second power source you may damage your hdd.
This is the cable, by the way:
http://bixnet.net/images/Cab-USB-YBlack.jpg
leodfs said:
Don't think so buddy. With the symptoms you have described on the OP, the only way you can get it to work is with a power cord extension.
It's is not even a guaranteed method, and if you don't take real care with the second power source you may damage your hdd.
This is the cable, by the way:
http://bixnet.net/images/Cab-USB-YBlack.jpg
Click to expand...
Click to collapse
Can i use my tab charger as extera power source adaptor?
Sent from my GT-P6200 using Tapatalk 2
Finaly done it ... used paragon ntfs app...
thank you all
Sent from my GT-P6200 using Tapatalk 2
Anyway to Relock bootloader to receive ota update?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
No. Updates need to be flashed manually. I use twrp to do it.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
funnel71 said:
No. Updates need to be flashed manually. I use twrp to do it.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Didn't think so. I have no data cable right now.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
Didn't think so. I have no data cable right now.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
With no cable, you can probably use air droid or Dropbox to download the file to your pad
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
paedz718 said:
With no cable, you can probably use air droid or Dropbox to download the file to your pad
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
I have no recovery though lol.. no cable means no fastboot means no way to install recovery. Lol.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
I have no recovery though lol.. no cable means no fastboot means no way to install recovery. Lol.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Oh. Figured with an unlocked bootloader you would have a recovery already. Why unlock and not flash one? I'm still locked but I'm familiar with recoveries with my galaxy nexus
Also I think you can use terminal emulator to use fastboot with no cable to a pc
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
paedz718 said:
Oh. Figured with an unlocked bootloader you would have a recovery already. Why unlock and not flash one? I'm still locked but I'm familiar with recoveries with my galaxy nexus
Also I think you can use terminal emulator to use fastboot with no cable to a pc
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
I was bored lol.. and fastboot isn't recognized. I'll just wait until the cable comes.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Incorrect. Go to the twrp website, and on the page where you download recovery for the tf300, there are instructions for flashing recovery without a PC - by using a terminal emulator as previously mentioned.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
funnel71 said:
Incorrect. Go to the twrp website, and on the page where you download recovery for the tf300, there are instructions for flashing recovery without a PC - by using a terminal emulator as previously mentioned.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Haven't seen the site but I'm assuming it requires using dd which requires root and busybox. Which requires a data cable
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
Haven't seen the site but I'm assuming it requires using dd which requires root and busybox. Which requires a data cable
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Yes, you're absolutely right. No root and busybox, no TWRP flashing using dd.
Skickat från min Transformer Pad TF300T via Tapatalk 2
I have an Asus TF300T with CyanogenMod 11. I noticed that HDMI doesn't work anymore. Is there like a root required app or something that can give me that capability?
Sent from my TF300T using XDA Free mobile app
Cyclone105 said:
I have an Asus TF300T with CyanogenMod 11. I noticed that HDMI doesn't work anymore. Is there like a root required app or something that can give me that capability?
Sent from my TF300T using XDA Free mobile app
Click to expand...
Click to collapse
I remember on CM and now on CROMBi I had to unplug and plug the HDMI cord a few times before it sent a signal out to the monitor/TV.
Did you have cm11 or an earlier version?
Sent from my ASUS Transformer Pad TF300T using XDA Free mobile app
Cyclone105 said:
Did you have cm11 or an earlier version?
Sent from my ASUS Transformer Pad TF300T using XDA Free mobile app
Click to expand...
Click to collapse
I installed it as soon as it came out (scroll down in thread :laugh: http://forum.xda-developers.com/showthread.php?t=2570965) and at that time I never needed to use HDMI so I never tested it. The CROMBi ROM I'm using now is based off of CM11 so I'm assuming that out HDMI output drivers would be about the same.
On my TV since it is 720p it cuts off part of the screen when using HDMI or using my Chromecast. I've tested this on 1080p TVs and it works perfectly. If this is what you mean then there is no fix unless you have a TV that is 1080p
Sent from my LG-E980 using Tapatalk
That does apply to me cuz I'm back on the stock rom and I have a 720p tv. If i were on android 4.3 or later i could use the "fix overscan" option of an app that requires root.
Sent from my ASUS Transformer Pad TF300T using XDA Free mobile app