How i can operating the sounds enables me during the holding of the conversation in a phone JAMin ?
regards.
Did I understand correctly:
You want to change the sound (louder / quieter) while talking on the phone?
That is what the slider on left side of the device is for (between the camera and comm manager buttons).
Could also be asking for how to enable hands-free during phone conversation :lol:
If that is what you want, just press and hold the green phone button until the sound comes out of the "external" speaker :roll:
thanks for replay levenum & victoradjei.
I want to started a music from my phone during the sound conversation .
regards
Oh, you mean like when someone puts you on hold, so the person you're talking to will here the music instead of you?
Unfortunatly that is imposible because of the hardware configuration.
There is an answering machine software now that got around this somehow (fake drivers?) but as far as I know there is no way to just play music.
Hi all,
After a phone call i often see that a lot of programms has been launched accidentally due to the contact between my ear and the touch screen.
does anyone have a tip to automatically lock the touch screen during a phone call ?
benjb said:
Hi all,
After a phone call i often see that a lot of programms has been launched accidentally due to the contact between my ear and the touch screen.
does anyone have a tip to automatically lock the touch screen during a phone call ?
Click to expand...
Click to collapse
Lol, my ear once accepted another incoming call from this girl that I was avoiding for ages... and I didn't even realise I was talking to her, thought it was my other mate.
MrSmith22 said:
Lol, my ear once accepted another incoming call from this girl that I was avoiding for ages... and I didn't even realise I was talking to her, thought it was my other mate.
Click to expand...
Click to collapse
Ouch!
If i'm not wrong, S2U2 can turn display off during a call. Great software!
I've tried two progs more: PhoneScreenLock and InesoftAddressBook.
Inesoft provide many features including display switch off during a call.
Phonescreenlock keep the display on showing info about the call, locking the screen.. but with long conversation you may frie your ear
Bye
KK
Any updates on this one please? I have the same problem with running gazillion apps on my Polaris with my ear in call as benjb did.
Tried PhoneScreenLock - did not work well for me because its buggy (the lock screen pretty often appears somewhere BELOW the in-call buttons or start menu and needs to be switched to via closing in-call screen, which obviously renders it useless).
The InesoftAddressBook is not an option either, cause I already have other address book app and would like to stick with it (BTW my current address book has "slide-to-pick-up-call" feature, which makes me afraid that it would conflict with S2U2).
Sadly the Polaris doesn't have motion or light sensor... It would make my life sooooo easier with ZuinigeRijder's TouchLockPro...
So any ideas on what else I could use please? Thanks!
two things...
1) Are you aware that after you answer/make a call but before you put the phone up to your ear you can press the power button (not press & hold, just press & release) which will turn off the display, but not disconnect your call (or, turn off your phone)? No stray on-screen button pushing this way! With the screen off the "end call/hang up" button still functions and when you press it the screen will come back on immediately. If you need to access your address book or make a note etc during a call, press & release the power button and it will turn the screen back on and not effect your call in any way. If your phone is set up like mine and it returns to the home screen each time the screen is turned on, then simply press the green phone button and the dialer comes back to the top.
2) If #1 doesn't do it for you and you need software to accomplish this, then search this forum for MissedCallReminder (just like that - no spaces). Besides having an option to "lock screen on connect" it has a very handy feature (the main feature actually, as the name indicates) of being able to set up repeat reminders for missed calls and missed sms messages. Very handy. It can be setup to run automatically at startup so you don't have to remember to start it up manually. It also automatically unlocks the screen when you end your call.
Turned out I had bookmarked the app, so here's a link:
http://forum.xda-developers.com/showthread.php?t=441593
FYI These codes have been obtained by decoding various .apk files present in the phone firmware.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
NOTE: All above codes have been checked on Google Android phone Samsung Galaxy I7500 only but they should also work in other Google Android phones.
Atleast say thanks
Great list of codes thanks for sharing it.
thank you
but some codes not working!
You can also enter the following code while in the lockscreen to get to most of the above mentioned service pages:
Menu, Back, Back, Menu, Back, Menu, Menu, Back
Good set of information, thanks for the post. gonna try some now.
Thank you..
Thank you for the codes...
Thanks for the codes, I'm going to add them to my wiki.
thanks for sharing
Just tried these out, and it turns out that the earpiece can actually get pretty damn loud... so it is a software problem after all (in-call volume).
Clyzm said:
Just tried these out, and it turns out that the earpiece can actually get pretty damn loud... so it is a software problem after all (in-call volume).
Click to expand...
Click to collapse
which code u use to make volume louder?
I've tried a number of these codes and nothing happens (except the phone information code).
I have a rooted x10a from Rogers 024 firmware
Thanks for the list though!
swapniladsure said:
which code u use to make volume louder?
Click to expand...
Click to collapse
Didn't make it louder, but I used the lockscreen code in the fourth post to test the speaker:
beno1 said:
You can also enter the following code while in the lockscreen to get to most of the above mentioned service pages:
Menu, Back, Back, Menu, Back, Menu, Menu, Back
Click to expand...
Click to collapse
great list of codes! ive been meaning to get all these together and save them somewhere....here i come, copy and paste!
thank you guys
Clyzm said:
Didn't make it louder, but I used the lockscreen code in the fourth post to test the speaker:
Click to expand...
Click to collapse
hey dude its only increase the volume on testing time...but when u actually make call than earepice volume is less....
any ways i tried to give my best code...
if in future if i find any new code than i will update it soon..
thank you u guys for all your replys
swapniladsure said:
hey dude its only increase the volume on testing time...but when u actually make call than earepice volume is less....
any ways i tried to give my best code...
if in future if i find any new code than i will update it soon..
thank you u guys for all your replys
Click to expand...
Click to collapse
...that's what I just said. All it does is test the speaker, it doesn't change any settings in the phone. All I said was that the speaker has the potential to have louder call volume.
About earpiece volume. This didn't work for me, but so far none of the codes are. Give it a try and let us know if it works for you.
Taken from the following website...
http://androidforums.com/1263586-post1.html
Earpiece volume to low? I'm talking about the earpiece speaker built into the phone, the part you hold to your ear. You can increase this volume beyond maximum factory setting. When you change this, please change it slowly, meaning 1 increment at a time, you don't want to blow your speakers out. Thank you to the user over at xda-developer forums who showed me how to do this. update: it seems if you do a reboot of your phone, the settings revert back to factory for this volume fix...working to try to figure out a way to lock in the new volume settings.
Okay, lets begin. Go to your dial pad. Dial in *#*#197328640#*#*
Next, tap your finger onto the following, in the following order:
[5] Audio
[1] Handset
[1] Volume
[1] SRS Speech RX Volume
next notice the following defaults that pop up.
[0]0_lvl:63
[1]1_lvl:68
[2]2_lvl:73
[3]3_lvl:78
[4]4_lvl:83
[5]5_lvl:88
This basically means, that your volume up and down keys have 5 clicks, starting from the lowest setting, and click your volume up 5 times, takes you through the sequence of volumes listed above. You can change each click to be a new volume setting. For me 1-4 are fine, I just wanted max volume, which is click number 5, to be something higher. The phone does not let you to put in half increments, meaning 88.5 is not possible. So you have to use 1 increments. Please please do this carefully, dont suddenly jump to 95, you could blow out your speaker possibly. So I tried just 1 increment above 88, went to 89, and perfect, much louder now! okay so this is how you do it:
Once you get the list above, do the following:
Click your finger on [5]5_lvl:88
Next, a screen pops up asking for input. On the bottom of your phone, tap the menu button, this is the button next to the little home button.
Next tap "key input"
Next tap 1 increment at a time, lets start off with 89 so where it says enter value, tap this, your keyboard pops up, type in 89
Next Tap your menu button again
Next Tap "end"
you are now finished, make a phone call and see how 89 works for you, when your volume is set to max
Clyzm said:
Didn't make it louder, but I used the lockscreen code in the fourth post to test the speaker:
Click to expand...
Click to collapse
I tried this and the volume was much louder! the issue was it really stared to disort and sound sh#t on the piano spot. So the reason why the volume is so low is the dam speaker is ****! Increasing the volume will cause more distortion and make things worse. I be happy to live with this for the next few years till my contract is over...
let me see this...
Terul said:
About earpiece volume. This didn't work for me, but so far none of the codes are. Give it a try and let us know if it works for you.
Taken from the following website...
http://androidforums.com/1263586-post1.html
Earpiece volume to low? I'm talking about the earpiece speaker built into the phone, the part you hold to your ear. You can increase this volume beyond maximum factory setting. When you change this, please change it slowly, meaning 1 increment at a time, you don't want to blow your speakers out. Thank you to the user over at xda-developer forums who showed me how to do this. update: it seems if you do a reboot of your phone, the settings revert back to factory for this volume fix...working to try to figure out a way to lock in the new volume settings.
Okay, lets begin. Go to your dial pad. Dial in *#*#197328640#*#*
Next, tap your finger onto the following, in the following order:
[5] Audio
[1] Handset
[1] Volume
[1] SRS Speech RX Volume
next notice the following defaults that pop up.
[0]0_lvl:63
[1]1_lvl:68
[2]2_lvl:73
[3]3_lvl:78
[4]4_lvl:83
[5]5_lvl:88
This basically means, that your volume up and down keys have 5 clicks, starting from the lowest setting, and click your volume up 5 times, takes you through the sequence of volumes listed above. You can change each click to be a new volume setting. For me 1-4 are fine, I just wanted max volume, which is click number 5, to be something higher. The phone does not let you to put in half increments, meaning 88.5 is not possible. So you have to use 1 increments. Please please do this carefully, dont suddenly jump to 95, you could blow out your speaker possibly. So I tried just 1 increment above 88, went to 89, and perfect, much louder now! okay so this is how you do it:
Once you get the list above, do the following:
Click your finger on [5]5_lvl:88
Next, a screen pops up asking for input. On the bottom of your phone, tap the menu button, this is the button next to the little home button.
Next tap "key input"
Next tap 1 increment at a time, lets start off with 89 so where it says enter value, tap this, your keyboard pops up, type in 89
Next Tap your menu button again
Next Tap "end"
you are now finished, make a phone call and see how 89 works for you, when your volume is set to max
Click to expand...
Click to collapse
let me see this it gona work or not
Hi,
also these codes are not working for me, except the *#*#4636#*#*.
The quoted post is related to Samsung Phones (Vibrant) and this is most probably the reson why it doesn't work on SE X10.
However, does someone know another set of codes for X10? The Service Menu, entered by the Menu/Back combination, shows a list item "Service settings" but with "No Item" in the next menu level. Is there any known trick to unlock this settings? Maybe there could be a option to adjust in-call volume...
All the Best
Peter
EDIT: X10i, R2BA026 rooted
no not yet solution for speaker volume increase
no solution yet..
let me try to replace speaker on my x10i
i will try to put any other speaker from other sony to my x10i..
same for loudspeaker also..
replace the ringer for mp3 volume increase of phone
but let me try this and than i will post u all
is it possible to control the phone during a call? E.g. when you enter a menu, press 1 for etc..
It seems that I still need to reach out to the phone for that, or do I do something wrong?
jpljonkman said:
is it possible to control the phone during a call? E.g. when you enter a menu, press 1 for etc..
It seems that I still need to reach out to the phone for that, or do I do something wrong?
Click to expand...
Click to collapse
The current version of AirDroid does not support that With AirDroid, you can initiate or end a call on the web browser, but you still have to take your phone to speak and listen, and to use the dial tone, like "press 1 for....".
Dear all,
I would like to request your help in this case:
I bought a Xiaomi Redmi Pro Exclusive from Aliexpress, this seller: https://www.aliexpress.com/item/Orig...763899877.html
But in one minute the capacitive buttons stop working, the rest works fine. When I do hard reset, it works during few minutes but once I press the buttons, they stop working. I am afraid it is a problem related to the LCD... Did you have any problem similar?
My problem is that the seller is rejected any proposal. I made a video he asked me for:
1>> Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. We need record it.you can not show the IMEI in this way .please show the IMEI on the phone box and the original film with stickers if you still keep them. We will accumulate the data to improve our "Quality Control".
2>> set the phone to "factory setting" ( you may backup the data before recording the video)
3>> Press " about phone " to show us the version of the MIUI.
4>>Dial *#*#6484#*#* to test "Key"
4>> Show us the problem about the button can not use in the video.
But then I received this answer:
I have checked the video you offered.
1.But sorry for we can not found the imei number in our database. WTF????
2.For the button.i have contacted with the xiaomi after-sale department,
The unofficial film could also effet the button.
3.With the video you offered.
The way you check the button is not right. WTF????
You need to press the button directly.not press the display. WTF????
So please make a new video to show us steps below:
1.Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. and please show the IMEI on the phone box and the original film with stickers if you still keep them. we need to record it.
2.Remove the flim to press the button,
3.Dial *#*#6484#*#* to test "Key" (When test . please press the button directly to show the issue.)
Then upload the video to Aliexpress.
I will do it again, but I would be glad if you could give any advice on how to answer and make the video. If there is not an agreement I am afraid I would have to buy the LCD (around 70 pounds) and give them to a corner shop to do it as I do not want to take the risk.
Thanks,
Jose
josemolto said:
Dear all,
I would like to request your help in this case:
I bought a Xiaomi Redmi Pro Exclusive from Aliexpress, this seller: https://www.aliexpress.com/item/Orig...763899877.html
But in one minute the capacitive buttons stop working, the rest works fine. When I do hard reset, it works during few minutes but once I press the buttons, they stop working. I am afraid it is a problem related to the LCD... Did you have any problem similar?
My problem is that the seller is rejected any proposal. I made a video he asked me for:
1>> Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. We need record it.you can not show the IMEI in this way .please show the IMEI on the phone box and the original film with stickers if you still keep them. We will accumulate the data to improve our "Quality Control".
2>> set the phone to "factory setting" ( you may backup the data before recording the video)
3>> Press " about phone " to show us the version of the MIUI.
4>>Dial *#*#6484#*#* to test "Key"
4>> Show us the problem about the button can not use in the video.
But then I received this answer:
I have checked the video you offered.
1.But sorry for we can not found the imei number in our database. WTF????
2.For the button.i have contacted with the xiaomi after-sale department,
The unofficial film could also effet the button.
3.With the video you offered.
The way you check the button is not right. WTF????
You need to press the button directly.not press the display. WTF????
So please make a new video to show us steps below:
1.Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. and please show the IMEI on the phone box and the original film with stickers if you still keep them. we need to record it.
2.Remove the flim to press the button,
3.Dial *#*#6484#*#* to test "Key" (When test . please press the button directly to show the issue.)
Then upload the video to Aliexpress.
I will do it again, but I would be glad if you could give any advice on how to answer and make the video. If there is not an agreement I am afraid I would have to buy the LCD (around 70 pounds) and give them to a corner shop to do it as I do not want to take the risk.
Thanks,
Jose
Click to expand...
Click to collapse
Download lenovo compainion mobile from play store and do the touch screeen test and tell me the results
Since you have a mi device, I don't know weather this app will work for you or not but better give it a try
Regards milkyway3
milkyway3 said:
Download lenovo compainion mobile from play store and do the touch screeen test and tell me the results
Since you have a mi device, I don't know weather this app will work for you or not but better give it a try
Regards milkyway3
Click to expand...
Click to collapse
Ok forget about it just download the touchscreen test app from the playstore and tell me the results
Regards milkyway3
milkyway3 said:
Ok forget about it just download the touchscreen test app from the playstore and tell me the results
Regards milkyway3
Click to expand...
Click to collapse
See the screenshot below