Database Info

Adreno 220 GPU update results

Applying Adreno 220 GPU update:
http://forum.xda-developers.com/showthread.php?t=1636752
Here are the results with quadrant (faux123 006+ ondemand governor) :
Before (ARHD 6.6.3 XE with Hardware 2D checked) :
Total : 3780
CPU : 7420
Mem : 3042
I/O : 5768
2D : 505
3D : 2166
AFTER (ARHD 6.6.3 XE with Hardware 2D checked)
Total : 4023
CPU : 7341
Mem : 3225
I/O : 6179
2D : 1042
3D : 2316

so this is what i experienced with the new drivers:
i'm using open sensation cm9
1)
before: browsing was fast, but some sites like nytimes (non mobile version) had a little lag because of the huge content
after: all the lags are gone --> super fast just like with an iPhone 4s
2)
before: contacts app --> cold start actually very fast but not instant
after: cold start of contacts --> instant --> no waiting

is it safe? will it clash with other ROM in the future?
i am using ARHD 6.6.3, but if i decided to flash other ROM, will it causes problem?

Should be safe, CM9 already has it.

Mr-YC said:
is it safe? will it clash with other ROM in the future?
i am using ARHD 6.6.3, but if i decided to flash other ROM, will it causes problem?
Click to expand...
Click to collapse
It's safe. I already tested with ARHD 6.6.3 and change ROM to ICS Asianic V1.2 (3.32.709.108).
ICS Asianic V1.2 (faux123 006+ performance governor)
BEFORE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AFTER

Insertcoin 5.5.0, Bricked kernel 1.1, highest 2d & 3d OC's, 1670 Mhz CPU OC
​

another question:
will it increase performance of decoding .mkv video?
if not, can you tell me where to read about what affect .mkv decoding and stuff?
thx.

Swapping internal SD to external SD.(tipo cm10)

The thing I wanna know is how to change internalSD to externalSD in xperia TIPO(I know how to do this in default ROM but since the vold.fstab fle of cm10 by FXP differs from it I am not sure about what to do...Help. :silly:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

trolling people said:
The thing I wanna know is how to change internalSD to externalSD in xperia TIPO(I know how to do this in default ROM but since the vold.fstab fle of cm10 by FXP differs from it I am not sure about what to do...Help. :silly:
Click to expand...
Click to collapse
You are aware of the risks associated with this action?

MatsPunt said:
You are aware of the risks associated with this action?
Click to expand...
Click to collapse
Maybe he's doesn't know these risk.
________________________________
Xperia Tipo
Android 4.0.4 Gimlo FW .22 Deodexed + Z1 Expérience [ROOT&CWM]
Snapdragon S1 + Adreno 200
Wiko Cink Slim
Android 4.1.2 S4 Like Custom ROM [ROOT&CWM]
MT6577 + PowerVR SGX531
Acer Iconia B1-710
Android 4.1.2 Stock ROM ( Bootloader can't be Unlocked )
[NOT-ROOTED]
MT6577v2 + PowerVR SGX 531 Ultra

MatsPunt said:
You are aware of the risks associated with this action?
Click to expand...
Click to collapse
Risks? What the heck?
when i swapped internal-external SD in default rom it works fine , nothing bad happens. So what are the risks now????

trolling people said:
Risks? What the heck?
when i swapped internal-external SD in default rom it works fine , nothing bad happens. So what are the risks now????
Click to expand...
Click to collapse
While memory is swapped if you wipe internal storage ur phone will hard brick
Sent from my C1504

AnTuTu Benchmark Comparison

Hi guys
Please put your AnTuTu Benchmark result number here so we know which Rom is the fastest and please tell us which Rom are you on
Here is mine :
sieuan rom (Full version)
http://forum.xda-developers.com/showpost.php?p=66326785&postcount=737
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For accurate comparison please use version 6.1.4 of the AnTuTu Benchmark :
http://www.apkmirror.com/apk/antutu/antutu-benchmark/antutu-benchmark-6-1-4-release/antutu-benchmark-6-1-4-android-apk-download/
And AnTuTu 3DBench 6.0.4 version :
http://www.apkmirror.com/apk/antutu/antutu-3dbench/antutu-3dbench-6-0-4-release/antutu-3dbench-6-0-4-2-android-apk-download/

Has N900 development gotten so bad that we now open thread because of antutu benchmarks

LilClin said:
Has N900 development gotten so bad that we now open thread because of antutu benchmarks
Click to expand...
Click to collapse
No harm at seeing which Rom is doing its best performance over these years

So then tell us about your Rom?

Cm 13.1
Cm 13.1 11/05
But version is 6.2.6

Unofficial CyanogenMod 13.0 (ha_3g)
My test result
Cyanogenmod 13.0 11/5
Battery life expand 4h+ but its kinda laggy.
I cant put a image for rules.
51311
3D: 10743
UX: 19297
CPU: 16724
RAM: 4567

wajid iqbal said:
So then tell us about your Rom?
Click to expand...
Click to collapse
I put my rom's link above and you can check it out

If you're looking for battery life just use Kernel Toolkit and decrease the Maximum frequency of the Cpu (in Cpu tab)

Amhad Basher V 5.8 with suemax kernel (included on the rom)
http://forum.xda-developers.com/galaxy-note-3/galaxy-note-3-exynos-android-development/n900n9000-bashergraceuxstylev5-8-5-9-t3454806

Note 3 N9005 on Phronesis Note 7 ROM, V4.0. Lss 3.8 kernel.
Stock bootloader and modem
Sent from my Note 3.7

Standard Note 3 Lte. N9005...with root.
Root with paid version of root booster installed and set to speed boost..
59830:good:
Sorry no image as i haven't posted 10 times yet.

Nearly as fast as my stock rom ?

Antutu benchmark
61782
3D 10010
UX 21001
Cpu 22526
Ram 8245
Arya rom
Darklord kernel V1.0

[AIO][DEV][RESEARCH]BLU ZOEY SMART 3G Development and Research Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The BLU Zoey Smart is a bad phone. There's no getting around that. KaiOS stutters at the best of times with 512mb of RAM. The BLU Zoey Smart has 256mb of RAM.​
Here are the full specs:
RAM: 256MB
Internal storage: 512MB
Micro SD Card: Up to 32GB
Processor: Spreadtrum SC7731ef/SP7731ef
Front Camera: VGA
Back Camera: VGA
Network bands: GSM quad band, 3G - 850/1900/2100
Display: 2.4 inch 320x240
Battery: 1,000mah
Device Codename: Pike2
However, all hope is not lost. Every manufacturer I have asked has not released the kernel source for their KaiOS phone. BLU on the other hand, was all too willing to give it out.
Here is the kernel source for the BLU Zoey Smart: https://github.com/Qiangong2/android_kernel_blu_pike2
NOTE: You will need to clone https://github.com/yonglongliu/vendor in the same directory as the source code.
NOTE 2: I am still piecing together the kernel source to get it to build properly.
There is no touchscreen on this device, so CWM or PHILZ are most likely the only recovery options.
Here is the build.prop: https://paste.ubuntu.com/p/Xw3ngwKcFx/ if anyone wants to look around
Also, here is a link to the firmware in case you destroy your Zoey Smart: https://forum.xda-developers.com/android/general/blu-stock-firmware-repository-mediafire-t3853065
NOTE: You need Spreadtrum ResearchDownload to apply the firmware, which is found here. A guide to use ResearchDownload is found here
I have not extracted the pac file to view the actual firmware, just viewed the build.prop, so if someone would be willing to do that, it would be great.

Unusual additions:
The build.prop manually sets and reports the SAR value, which I am pretty sure is illegal or at the very least, very shady.

Reserved for future

No surprise, but the kernel source is broken. Yay -__- Thanks Spreadtrum.
sprd_dcam is the issue, I'm currently looking for a fix, but Spreadtrum kernels are infuriatingly not filled with commits. Most kernels usually have "updated kernel" as the commit message instead of cherry picking.
If anyone has experience with SPRD Kernels, I'd appreciate any assistance.

I have questions about my phone's hardware specs

Hello everyone, I'm new here, I don't mean to take your time but I have questions concerning my phone and I hope I get an answer. I use a Tecno spark go 2021 and I'm trying to check which cpu my phone uses cuz I didn't see it in settings, I only saw the CPU type. So I downloaded two apps to check the info
The info from CPU z showed I have Helio A22(MT6761V/WE) 1.8ghz but on Mediatek site, Helio A22 has 2.0ghz so I decided to use another app(devCheck), and it showed that the device uses Helio A20, with the same details but different name although I think it's using an Helio A20 but I'm still confused cuz I don't know which one to believe. Guys please do you Know the exact processor my phone use?
Here is the image from my device settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the one from CPU z app
This is the one from devcheck app
My second question which is what brought me here is,
I'm trying to download a game, I met every other requirements but I need armv8-a cpu which my phone doesn't have, I tried to check the specs for the two processors mentioned above since I didn't know which one is on my phone. articles I saw online for both CPUs showed they use cortex A-53 and they have armv8-a (Helio A20 and A22). But using the hardware checking apps, it shows that the CPU uses Armv7 which makes me wonder if mediatek is not being truthful about their CPU specs.

In every Android OS's file named build.prop, located in /system partition, it is written which CPU architecture ( instruction set - 32bit or 64 64bit ) is supported. IMO all other CPU related infos given are irrelevant.

xXx yYy said:
In every Android OS's file named build.prop, located in /system partition, it is written which CPU architecture ( instruction set - 32bit or 64 64bit ) is supported. IMO all other CPU related infos given are irrelevant.
Click to expand...
Click to collapse
Hmmmn can any file manager view it or I have to download another app

It's MediaTek Helio A20.
https://www.mediatek.com/products/smartphones-2/mediatek-helio-a20

James_Watson said:
It's MediaTek Helio A20.
https://www.mediatek.com/products/smartphones-2/mediatek-helio-a20
Click to expand...
Click to collapse
Thank you very much