mukulsoni`s CM11 bugs - Optimus One, P500, V Q&A, Help & Troubleshooting

P500H dual boot CM7.2 on SD and CM11 on internal
install CM11 v10 then OTA to 10.3
1- setting-> Lock screen -> slider shortcuts = FC
2- play store didn't connect to the internet (browser had no problem) i had to use the fix from http://forum.xda-developers.com/showpost.php?p=51368664&postcount=1182 to get it to work
3- how can i add Hebrew dictionary ?

Hey, does any one know the fix for Google play services FC on v 10.3?? I tried installing different version of it and Aldo cleared the data. What's the problem? Is it lack if system space??
Sent from my Optimus One using xda app-developers app

D3oDex3D_AyusH said:
Hey, does any one know the fix for Google play services FC on v 10.3?? I tried installing different version of it and Aldo cleared the data. What's the problem? Is it lack if system space??
Sent from my Optimus One using xda app-developers app
Click to expand...
Click to collapse
try the fix from http://forum.xda-developers.com/showpost.php?p=51368664&postcount=1182

V11
i did a fresh install of CM11V11
bug 1 is fixed
at the moment i have a problem whit ad2sdx
my fre space didnt get big so i had a look at /system/etc/init.d
and to my surprise it didnt have 10ad2sdx in it
did any one else see this problem?
(i have the sd-ext on mmcblk0p4 not 2 so i rewrote the file)

i think i fount the problem
in update-script
# Options for SD-Ext
if file_getprop("/tmp/aroma-data/sdext.prop","selected.1") == "1" then
ui_print(">>> Installing Link2SD");
package_extract_dir("common/aroma/sdext/link2sd", "/data/app");
endif;
if file_getprop("/tmp/aroma-data/sdext.prop","selected.2") == "2" then
ui_print(">>> Installing AD2Sdx");
package_extract_dir("common/aroma/sdext/ad2sdx", "/system/etc/init.d");
endif;
but i think selected.2 needs to be selected.1

tested
yes it was a bug
selected.2 needs to be selected.1

Fast boot mode stuck
After installation, phone stuck in fast boot mode UDC_started
although recovery mode running fine, problem occurs in normal mode only.
Anyone faced/resolved this issue, Please help
Note:
Using all given steps.
Using latest ROM and recovery

I am unable to get any network, baseband version is also unknown.
Please help.

Battery drain and heating on wi-fi standby
The problem with my phone was that, there was enormous battery drain and heating on wifi stand by. I forget to turn off my wifi, and when i checked back, battery drained from 80% to 4% in half hour and the phone was heating too much
---------- Post added at 02:49 PM ---------- Previous post was at 02:43 PM ----------
danielboro said:
try the fix from http://forum.xda-developers.com/showpost.php?p=51368664&postcount=1182
Click to expand...
Click to collapse
Thank You

Bootloop KitKat Rom V12 by @mukulsoni
Helo everybody!
Each time I try to flash [ROM][4.4.2][CM11] KITKAT for LG-P500 V12 by @mukulsoni I get the same bootloop issue.
I have waited for 45 minutes and nothing happened. After my nerves were at a bad state I pulled off the battery since nothing else could work.
After that I opened the phone, it booted (!!) did some app updating and started normally.
My main question is whether there is a way for me to check if the flashing/installation has been made correctly and I can use my new rom or if I have to flash it over again. 2 times ended up to the same state, bootloop!
I am pretty sure I do everything "by the book" but despite all my efforts the result is the same.
Please any help would be greatly appreciated!

Related

[ROM] Smartoonay V1.0 - Acer Iconia Smart as it should be !

Hello,
this ROM is designed for the Acer Iconia Smart. Acer's latest flagship Androphone.
All credits goes to Vache for making this great ROM !​
Here is the changelog from Vache :
Code:
T1
Based on Acer_S300_1.000.19_EMEA-GEN1
Rooted
Busybox, nano, bash...
Unsecure boot (adb remount)
semiTransparent notif
Transparent dock background
removed pagination bubble on the homescreens
Stock Lockscreen
Disable Debug USB icon
Smoother Launcher transitions
Disable camera sound
disable some useless Acer services
Removed many apps
Added TerminalEmulator
Updated all apps
SD speed tweak
Lowmemkiller tweak
Zipalign at boot for new apps
Using Google DNS
Removed craps on homescreen (widgets)
Added SpeechSynthetizer
Network tweaks
Ice Cream Sandwich bootanimation
Added compatibility swith in Settings app
Disable some animations
Disable bubble tooltip at first start
Added GoLauncher & LauncherPro (edited to fit the screen)
Added EStrong File Exploer and Task Manager
T2
Fix Phone.apk FC when calling
Fix /data mount during flash
...
T3
Fix WiFi error
AOSP Dialer
T4
Fix HotReboot when installing app that can be move to SD
ICS Market v3.2
T5
Fix typo in the update script
Back to stock Music (for notification widget)
Removed nemoPlayer
Updated SU binary and app
Updated Terminal Emulator
Updatd Youtube
ICS UI sounds
ICS Theme
T6
Removed GooglePlus 2.0 (make the contact FC when FB sync is active)
Fix Google Account disappear after some reboots
T7
Added TabooTools for Iconia Smart
Easy change Acer/Stock Contact/Lockscreen/Notifications
Updated SU binary
Fix TalkBack Keyboard FC
T8
Fix SU binary
Fix Acer Contact file name
T9
Modded hosts file for ads filter
Updated VoiceSearch
More ICS theme for framework and apps
T10
Fixed GPS and Batterie icons
Fixed ICS progress bar
Optimized automatic LCD backlight values
Added 1% batterie step in the framework
Added QuickSettings for stock notif
Fix notif switching from TabooTools
Even more ICS theme
T11
Fix Fast Dormancy
Custom kernel with OC/UV (up to 1.9Ghz)
Requirements :
- Acer Iconia Smart... obviously
- Acer drivers available HERE
- CWM recovery files for Iconia Smart. HERE
I) First Step
Update to latest Acer revision available HERE
WARNING this update will erase all your data
II) Install the custom Recovery
Plug your Iconia Smart to your PC.
Unpack the zip file containing the recovery.
Execute install_recovery.cmd and just follow the steps.
III) Preparing
Copy the ROM ( Smartoonay-1.0.zip) to your sdcard (this has to be an external sdcard, not the phone memory).
IV) Almost there
Switch off the phone and boot to recovery by pressing [vol+] + [focus] + [power]. Keep pressing the buttons until you're in the recovery (yellow text on black screen)
(You get "focus" by half pressing the camera button).
V) WIPE !
Once in the recovery choose "wipe data/factory reset" and validate (pressing camera button).
Also "wipe cache partition"
And then in "Advanced" choose "Wipe Dalvik Cache"
VI) Installing the ROM !
Go back to home menu of the recovery, choose "install zip from sd card" then "choose zip from sdcard". Find the file Smartoonay-1.0.zip (you just copied it on your sdcard) and validate to launch the installation.
Once done just reboot the phone and you're good to go !
You have just convinced me to buy this phone. I was torn between this and the Note, it's refreshing to see some Development on this.
Thankyou very much, your instructions are excellent BTW!
FYI, for me it worked once (after reset) and then went into a bootloop after installing this rom. Never got into fixing it as Vache did not respond anymore... you haven't had that issue?
Regards,
Nika.
Hi,
It bootloops on the bootanimation ? It can happen and usually it works if you remove the battery for 5min.
Can you describe where it stopped working and what you did just before it bootlooped ?
I haven't tried removing the batt, it just bootlooped after my first softreset in the morning. I did try several times, tried resetting all caches, and then reverted back to 1.000.19 eventually and gave up...
I may try again soon... too much work right now
Regards,
Nika.
Going to give it a go this evening.
Really excited to try it out.
So how did it go ?
In my case it keeps displaying the Acer / Android logo... it does not boot (just Android logo)...
Thank´s for me works well
Well...I have tried like 10 times, still nothing.
I started by installing cwm & making a backup (good step to add to your steps in the OP). Then I started install of smartoonay:
1. install 1.000.19
2. boot 1.000.19 once (& configure next, next, finish)
3. install new cwm
4. factory defaults from cwm
5. clear cache from cwm
6. clear dalvic cache from cwm
7. install smartoonay from cwm
Boot wail stop at the acer/android screen (with the 3 green androids).
I have tried fact/def from vol+/- and from cwm. I have tried clearing caches before and after smartoonay. I've downloaded smartoonay rom from vache several 3 times to make sure it's not a faulty rom... nothing...
Restored the backup: everything fine again...but still no smartoonay
Regards,
Nika.
Sorry to read that it doesn't work for you. Have you tried with the .24 official update? It did work for several people.
If it still doesn't work you might have to wait for a next release from vache that will take the smart to a new level ;-)
paugustin said:
Sorry to read that it doesn't work for you. Have you tried with the .24 official update? It did work for several people.
If it still doesn't work you might have to wait for a next release from vache that will take the smart to a new level ;-)
Click to expand...
Click to collapse
Downloading now:
http://global-download.acer.com/GDF... SMART (S300)&OS=a06&LC=nl&BC=Acer&SC=EMEA_18
Regards,
Nika.
Nope... for whatever reason it doesn't work for me.
1. Install .24 version (link see above)
2. Install cwm (4.0.0.8 version from S300-recovery.img 14/07/2011)
3. factory defaults from cwm
4. clear cache from cwm
5. clear dalvic cache from cwm
6. install smartoonay from cwm
Still only see my little Android friends
That's disapointing. Keep yourhopes up as Vache is working on a whole new ROM for the Iconia Smart. It's time consuming but it's going forward and it should be worth the wait
For the current ROM I think we tried everything (removing the battery and all) already and it might be an issue with you model.
paugustin said:
That's disapointing. Keep yourhopes up as Vache is working on a whole new ROM for the Iconia Smart. It's time consuming but it's going forward and it should be worth the wait
For the current ROM I think we tried everything (removing the battery and all) already and it might be an issue with you model.
Click to expand...
Click to collapse
I really hope he's able to give us something that'll work on all devices! I love Vache's work and was really disappointed when the only custom ROM we have didn't boot.
FloatingFatMan said:
I really hope he's able to give us something that'll work on all devices! I love Vache's work and was really disappointed when the only custom ROM we have didn't boot.
Click to expand...
Click to collapse
It doesn't work on yours either? Did you try it? Remember my device has a defect (touchscreen top is defective), so possibly it works on yours... (and I really did everything I can think of, including formatting system, etc., manually)...
My S300 also stuck in booting screen (Acer logo with 3 android idol) after flash the Smartoonay ROM...
I forgot backup my ROM before flashing it, does any one can help me how can flash back the official ROM without backup?
nikagl said:
It doesn't work on yours either? Did you try it? Remember my device has a defect (touchscreen top is defective), so possibly it works on yours... (and I really did everything I can think of, including formatting system, etc., manually)...
Click to expand...
Click to collapse
I actually had it before general release. Alas, my device just hangs until I take out the battery. Shame really, the root & cwm part worked great.
edmundtsang said:
My S300 also stuck in booting screen (Acer logo with 3 android idol) after flash the Smartoonay ROM...
I forgot backup my ROM before flashing it, does any one can help me how can flash back the official ROM without backup?
Click to expand...
Click to collapse
Hi edmund,
Just download the official ROM from somewhere (OS_Acer_1.000.24.EMEA.GEN1_A23G_S300), see above post. Or find yourself another ROM (I also used EUUs_Acer_S300_1.000.19_EMEA-GEN1_01.05.00 in the past, just google for it).
Connect your device with USB and install it using the setup.exe in the download.
In my case the installer crashed btw, because I have the android sdk installed which has a newer (incompatible) version of adb. Just make sure the PATH variable does not contain the ADB.EXE (use "for %I in (adb.exe) do echo %~dp$PATH:I" to figure that out).
Good luck!
Regards,
Nika.
Dear all,
I have been trying to get this ROM going but still no success.
I have compared the two boot images, and they are almost the same. It looks like it should be possible to run the Smartoonay rom with the stock boot image. That gives the highest success as well, because when I try to use the default Smartoonay rom it will get stuck at the first Android page (so it never shows the ICS boot animation). I also tried using the Smartoonay boot image with the stock ROM, but it then also gets stuck at the Android screen (see above image)
When I use the stock boot image, it finally displays the ICS boot animation, but it will get stuck in a bootloop. Usually caused by not clearing cache and such, but no solution in my case.
When I look at recovery.log, I do see one thing that I've never seen before:
Code:
Formatting /system...
[COLOR=Red][B]mtd: not erasing bad block at 0x08e00000[/B][/COLOR]
Done.
I wonder whether this one bad block may be the cause?
Anyone any other suggestions? Or maybe some instructions (a kitchen???) on how to make a new ROM like Smartoonay did? Any new Smartoonay ROMs to look forward to?
Regards,
Nika.
---------- Post added at 10:22 AM ---------- Previous post was at 10:16 AM ----------
FloatingFatMan said:
I actually had it before general release. Alas, my device just hangs until I take out the battery. Shame really, the root & cwm part worked great.
Click to expand...
Click to collapse
By the way... I fixed my screen by getting a new Touch Screen Digitizer for Acer S300 Iconia Smart Device is difficult to take apart (first take off top cover where the power button is in, which is a flat plastic, then take the screw out, then take the entire top cover off, remove two screws, open battery department cover, remove battery & screws, and then you can use a soft plastic pull tool to take the screen out...)

【ROM】liberty_sense3.5_Bliss_Beta2

Which lasted four days to complete most of the BUG edition BUG repair with a whole week this time really tired mentally exhausted from transplantation to a lot of pressure though, did not live up to my expectations was finally able to normal use is not really easy to encourage it two days before the transplant ROM of a the MIUI + ICS4.0.3's just BUG too many did not dare to release this time in to repair sense3.5 so temporarily ran aground 4.0 I now rest a few days and then proceed to that which is BUG repair the MIUI + ICS4.0.3 of ROM is a bit more I will try to repair is estimated to be slightly longer point I hope you understand.
Blessings do not talk nonsense subject reproduced please specify from the fun online but prohibit reproduced ING network Wan Wang understanding
[For a basic introduction]
ROM until today basically completed most of the basic functions
1, the normal phone functions
2, SMS, MMS function is normal
3, the touch screen is normal
4, the normal key
5, a normal USB debugging and USB mass storage mode
6, normal light perception
7, the camera is normal
8, Bluetooth (Bluetooth scanning repeatedly check can be found)
9, gravity sensor normal
10, wifi normal
11, weather updates (some areas may be positioned less than please do not thank you like me to submit BUG)
12, the GPS is normal (and heard I was not detected light to drop)
13, I heard that hot spots can be used ah I was not detected
【BUG introduction】
The following function is temporarily unavailable
2, FM (this feature may be unable to repair the understanding of twelve)
3, Internet sharing
More BUG waiting for feedback ..........
[Brush to write the method]
(1) use 2.5 or 4.0, the REC brush write
2、 Copy the ROM to the SD card root directory, enter the REC select "wipe one data / factory reset" and "wipe one cahe partition
3 Select the format All partitions (except sdcard to) "(Note in advance to make a backup)
Select the install the zip from sdcard to "→". Choose zip from sdcard to, you copy the ROM file, click into the brush to write
5 wait for the brush to write to complete, you can restart. (In case the card a long time in the first screen, restart try another: Please verify the MD5 value, while recognizing the REC version)
【MD5值】 [MD5 value]
Size: 142,570,120 bytes Modified: March 1, 2012, 21:39:23
MD5: 885A9CC4E592015C052B8A96B8AC89AB MD5: 885A9CC4E592015C052B8A96B8AC89AB
SHA1: E1D0A5B92E168B38AABD6CF156419A59911544CE SHA1: E1D0A5B92E168B38AABD6CF156419A59911544CE
CRC32: 42541C23 CRC32: 42541C23
[Download]
http://115.com/file/c2xcicre
wow! thank you!!
Sent from my HTC Sensation XE with Beats Audio using xda premium
is the rom deoxded? in need RTL
Sent from my HTC Sensation XE with Beats Audio using xda premium
Thanks For great work!!! will try it and give u the feedback.....
I liked it more than CM7!
It's great but there is no russian. How can I fix language with this ROM
http://forum.xda-developers.com/showthread.php?t=1285694 ?
What files have I copy?
This is the Chinese national done I will in the next edition ROM add language
airk000 said:
This is the Chinese national done I will in the next edition ROM add language
Click to expand...
Click to collapse
Is this ROM in English or chines?? can u please make it as a English version of sense 3.5.......
gm_vel said:
Is this ROM in English or chines?? can u please make it as a English version of sense 3.5.......
Click to expand...
Click to collapse
There are both languages! But most of apps are chineese, you have to install english versions.
airk000: Big thanks!!! I think it will be the best ROM for Aria!
The ROM is Chinese and English
I would love to try / test this out
but I have not clue what to click on from the site listed above and it doesn't download automatically?
Little help here please.
Nutshell69 said:
I would love to try / test this out
but I have not clue what to click on from the site listed above and it doesn't download automatically?
Little help here please.
Click to expand...
Click to collapse
You should press white button
or
use this link http://files.mail.ru/QL4BC4 and press red button.
can anyone test exchange security in the email app?
Sent from my Liberty using XDA App
ahren37 said:
can anyone test exchange security in the email app?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
i will as soon as I get it downloaded
Tried to downlaod this from op twice both times est. Download time was 7+ hours and lost download 15 minutes into download. also can anyone clarify the op says miui + sense I thought miui was not possible on our aria.
Sent from wherever I am?
downloaded
installed
boot looped
had to revert
---------- Post added at 09:37 AM ---------- Previous post was at 09:36 AM ----------
E.Cadro said:
Tried to downlaod this from op twice both times est. Download time was 7+ hours and lost download 15 minutes into download. also can anyone clarify the op says miui + sense I thought miui was not possible on our aria.
Sent from wherever I am?
Click to expand...
Click to collapse
i can host somewhere if you want
I have already transplant success MIUI + ICS4.0 but BUG is a little more basic functions can't use the telephone
boot looping
I too am stuck in a bootloop after installing. Does anyone know of a fix to make it boot?
mr2sweet said:
I too am stuck in a bootloop after installing. Does anyone know of a fix to make it boot?
Click to expand...
Click to collapse
I did this way:
1) Full wipe (without SD)
2) Install zip (with SD)
3) Run
4) If there is bootloop - make wipe again and run.
Nutshell69 said:
downloaded
installed
boot looped
had to revert
---------- Post added at 09:37 AM ---------- Previous post was at 09:36 AM ----------
i can host somewhere if you want
Click to expand...
Click to collapse
Thanks but I finally got it haven't tried it yet but will report back if I can get it to boot
Sent from wherever I am?
Syavick said:
I did this way:
1) Full wipe (without SD)
2) Install zip (with SD)
3) Run
4) If there is bootloop - make wipe again and run.
Click to expand...
Click to collapse
I guess i could do that
I did do a full wipe and install the zip , guess i can try a second wipe

[ICS][ALPHA][02-03-2012]CM9 with camera support

This is a snapshot of my work on bringing camera support to Tezet's Milestone2 ICS port.
This is continuation of this thread: http://forum.xda-developers.com/showthread.php?t=1520572
- it's based on CM9 snapshot from March 2nd
- it may contain more (or less) bugs from Tezet's builds. It's simply different, newer etc.
- it should be possible to load this without factory reset on top of Tezet's CM9 builds and the other way around, though the last time I've tried this was early February...
- there's no need to wipe dalvik cache - the update script does this
- the fix for SIM lock pin is not included
- there's no Torch and file manager app. Don't ask
Camera notes:
The work is based on Atrix ICS camera support, with added overlay emulation.
What is working:
live preview
zooming
flash
focus
exposure compensation etc
taking photos
some 3rd party apps (Pano, CameraFX, Barcode scanner)
doesn't crash when enterinng video/panorama mode
generally much more stable
... probably not much more
What is not working:
panorama mode
video recording
a lot more
Other stuff: (compared to previous version)
- bluetooth should be OK (please test)
- aGPS should work
I highly recommend to do a nandroid backup before trying it.
Latest version available at http://code.google.com/p/cm9-milestone2/downloads/list
If your phone is stuck on Google logo, it means you have chosen a wrong version and you need to recover your phone from the SBF file.
Repository:
repo init -u git://github.com/rondoval/android.git -b ics
All the credits go to:
- Tezet, for the Milestone2 port
- tpruvot, Quarx2k, for their tremendous efforts on Defy support (and thus Milestone2)
- whole Atrix-Dev-Team, Raviprasad V Mummidi, zivan56 for their tremendous work on the camera driver
Just backing up my MS2 now. Going to flash it over CM7 Tezet and see how it goes.
Cheers for the efforts
omg thanks ! download...
Sent from my MotoA953 using xda premium
mattyt_491 said:
Just backing up my MS2 now. Going to flash it over CM7 Tezet and see how it goes.
Cheers for the efforts
Click to expand...
Click to collapse
its for CM9....
devilbatghost said:
its for CM9....
Click to expand...
Click to collapse
Actually this would be a good test... I did that in december. I had some issues, bu I think that was mainly due to wrong version of gapps.
If you're still planning to try upgrading from CM7 to CM9: You may need to wipe telephony provider data and deskclock after upgrade.
/data/data/com.android.deskclock/databases/alarms.db
/data/data/com.android.providers.telephony/databases/telephony.db
Please tell us how did it go
hi, rondoval.
chrome beta don't work. can you try to fix it when you have free time? thx.
rondoval said:
Actually this would be a good test... I did that in december. I had some issues, bu I think that was mainly due to wrong version of gapps.
If you're still planning to try upgrading from CM7 to CM9: You may need to wipe telephony provider data and deskclock after upgrade.
/data/data/com.android.deskclock/databases/alarms.db
/data/data/com.android.providers.telephony/databases/telephony.db
Please tell us how did it go
Click to expand...
Click to collapse
I know it is CM9 I said I was flashing (upgarding) FROM CM7.
As per your advice I cleared alarms.db and telephony.db and was going well.
I also was unable to find the fix for the SIM PIN lock, so I just disabled it.
I haven't yet tried the gapps for ICS because the download through multiupload.com is not working (seems as though multiupload in general is down).
I can confirm that the camera works (photos only) and was able to upgrade from CM7 with no issues without wiping my data.
The ROM is smooth and seems to handle most tasks I have thrown at it. However, I am finding 3D performance a bit lesser than that experienced on CM7 (not a major issue).
Cheers.
Good work, thx! Glad to see we have one more dev working on our MS2.
This rom is awesome!!! =D
Someone can upload the Gapps 4.0.3 please ? because the link on the other post is dead.
Thanks in advance
tony_the_unik said:
This rom is awesome!!! =D
Someone can upload the Gapps 4.0.3 please ? because the link on the other post is dead.
Thanks in advance
Click to expand...
Click to collapse
Here's the link to gapps http://goo.gl/krVg1
Thanks for the gapps link.
Out of interest is there a fix for the Sim pin code yet?
Sent from my MotoA953 using XDA
Some news:
First 5sec 480p video recorded.
Going to cinema now, so don't expect a build today.
New patch for 1% step battery counter on this build
rondoval said:
Some news:
First 5sec 480p video recorded.
Going to cinema now, so don't expect a build today.
Click to expand...
Click to collapse
thank you. I am glad to see the video recording fixed
Is there any bug for the touch?
Since when I am touching and holding on the screen, it displays I'm swiping horizontally instead of holding it (I enabled "Show touches" in Development Tools)
I believe i might have run into a bug, Im not sure if anyone has note this bug or not. In the apps menu, if you hold a application, you can drag it to Remove which will uninstall the app normally, however at the moment, dragging it to Remove does nothing. Does anyone have a idea whats wrong?
i have a huge problem. when my phone is booting up, it only shows the google logo, and.. nothing happend. only a black screen with backlights.
if i try the X factory reset, the screen with an exclamation mark pops up -
but if i press the @ key, nothing happen.
if i try to the connect my phone with RSD lite, the bootloader is loading but shows 'battery low
cannot program'
when i was trying to load the ROM my battery was ~50%...
what should i do?
after a few times failing with the @ - it works.. one time..pressed the factory reset - booted up - still bugged with the google boot up logo...
hi, aznsniper
i have the same problem,i have no idea to solve it. sorry... maybe rondoval will fix it in next build.
@jimbo0815
Did you factory wipe, cache wipe and dalvik wipe before installing the rom? If you did, is it possible that you installed the wrong version? Just my 2 cents worth.
aznsniper said:
I believe i might have run into a bug, Im not sure if anyone has note this bug or not. In the apps menu, if you hold a application, you can drag it to Remove which will uninstall the app normally, however at the moment, dragging it to Remove does nothing. Does anyone have a idea whats wrong?
Click to expand...
Click to collapse
ylqiu said:
hi, aznsniper
i have the same problem,i have no idea to solve it. sorry... maybe rondoval will fix it in next build.
Click to expand...
Click to collapse
that's a problem of trebuchet, the launcher. so it has to be fixed there.
but i think should be like that.
Sent from my MB525 using XDA App

weird problem after installing new rom

i've tried searching for my current problem but doesn't seem to get a good match. (damn this site is BIG.)
i really apologize if i overlook it, or my searching skills really suck.
here's my problem:
i've been trying to install this new rom: http://forum.xda-developers.com/showthread.php?t=1436854 to my galaxy SII.
after installing i have this problem of not being able to switch on my wi-fi.
also there's a problem with storage.
if i go to settings > storage (under device). a pop up appear saying "unfortunately, Settings has stopped". then there's options 'Report' and 'OK'.
i restarted everything again, reinstalled everything again and came up with the same problem
this is my phone info:
model: GT-I9100
android version: 4.0.4
baseband: I9100XXLPS
kernel version: 3.0.15-I9100UHLPK-CL390451
[email protected] #3
build number: IMM761_RR
resurrection version: resurrection remix ics v.2.6 by westcrip
i followed these instructions here: http://forum.xda-developers.com/showthread.php?t=1544487
download the latest one (I9100XWLPM)
after that followed this: http://forum.xda-developers.com/showthread.php?t=1103399
download this file: CF-Root-SGS2_UH_UVC_LPK-v5.5-CWM5.zip
after rooting, i then install the new rom.
following this:
off phone.
press volume up, home button dan power button
backup and restore
backup to internal sd card
after backup.
wipe data and factory reset
wipe cache
advanced > wipe delvik & wipe batt stats
press FIX PERMISSION
install zip from internal sd
follow instructions.
im wondering if there's something that i did wrong that's causing this problem..
thx so much in advance
Factory reset
Did you tried factory reset?
It might solve this problem.
If I helped you just hit thanks
Niquel97 said:
Did you tried factory reset?
It might solve this problem.
If I helped you just hit thanks
Click to expand...
Click to collapse
no man.. it doesnt. i tried reinstalling everything too.. i think its the rom? im not sure.. =(
darkclaw3000 said:
here's my problem:
i've been trying to install this new rom: http://forum.xda-developers.com/showthread.php?t=1436854 to my galaxy SII.
after installing i have this problem of not being able to switch on my wi-fi.
also there's a problem with storage.
if i go to settings > storage (under device). a pop up appear saying "unfortunately, Settings has stopped". then there's options 'Report' and 'OK'.
Click to expand...
Click to collapse
about wifi : maybe that rom uses a recompiled kernel If you don't know I can tell you about : this is a well-known problem in linux and android kernel when recompiling kernel wifi module can not work the solutions is to compile it separately (...)
I'm not sure but if this is about that rom you only have a chance to try another rom
about storage error: it make me think that : that rom surely has some errors ... try another rom
also is not my intention to blame anybody I just tell you about my experience in fact is very hard to prepare a custom ROM !
You are supposed to fix permissions after a flash. Also, why are you wiping battery stats? That doesn't do anything.
lowandbehold said:
You are supposed to fix permissions after a flash. Also, why are you wiping battery stats? That doesn't do anything.
Click to expand...
Click to collapse
at which point did i miss that step..? im sorry its kinda confusing for me haha. im wondering if its the rom itself
batterystats.bin (search for this file by Root Explorer i.e.) is used to compute battery usage in UI settings in "Battery Use" if you reset it that's for more accurate calculation of battery usage indeed it can not solve your problem but can be useful ...
if you fix permissions maybe will solve 2nd problem but not sure about 1st problem if so pls post here it's something interesting but for me was never a solution to wifi problem- I have had to compile wifi module separately in order to get a working wifi
if this solves your problem credits go to lowandbehold
only that I can't wait out of curiosity ...post here if it solves your problem !
(from CWM menu or read this )
darkclaw3000 said:
at which point did i miss that step..? im sorry its kinda confusing for me haha. im wondering if its the rom itself
Click to expand...
Click to collapse
In your steps you said that you fixed permissions and then installed the zip. You have to install zip and then fix permissions.
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
Just looked at the OP...there are extended steps to installing the ROM for the first time...
http://forum.xda-developers.com/showpost.php?p=28121898&postcount=51494
IT'S SOLVED!!!
its a problem with the kernel! after changing another one, it works perfectly!
this is the kernel i changed to: siyahkernel/v3.0/Siyah-v3.3.3d-CWM .zip
THANKS SO MUCH EVERYONE!
darkclaw3000 said:
IT'S SOLVED!!!
its a problem with the kernel! after changing another one, it works perfectly!
this is the kernel i changed to: siyahkernel/v3.0/Siyah-v3.3.3d-CWM .zip
THANKS SO MUCH EVERYONE!
Click to expand...
Click to collapse
well,
there is a tool named modinfo in Linux useful to get info about .ko modules it simply display version magic this is in fact kernel version that this module was compiled for it means if you have i.e. kernel ver. 2.6.32.9 and version magic for module is 2.6.35.7 it means wireless is not working because that module wasn't compiled for that kernel it's about rights and symbols not exported by kernel so module can't load -and other technical explanations but we can't enter more details here because it's possible to get criticism from Torvalds but who cares about
In fact I never knew that but now it's easy to understand what happened : flashed that rom then changed kernel now wifi will not load ...because it was compiled for another kernel...something like that !
Problem after instal Viper ROM
Hi,
I encountered problems right after installation of Viper ROM on my HTC ONE X.
1. Facebook for HTC sense doesn't appear in my sync account.
- Tried to install in but having problem with the system message is cannot installed. Even though manage to install and when I try to run it. It auto stop.
2. Weather full animation feature is turn off. Try to go the menu and it seems like the edit button is off.
Please advice.
Thanks
ruscan.calin said:
well,
there is a tool named modinfo in Linux useful to get info about .ko modules it simply display version magic this is in fact kernel version that this module was compiled for it means if you have i.e. kernel ver. 2.6.32.9 and version magic for module is 2.6.35.7 it means wireless is not working because that module wasn't compiled for that kernel it's about rights and symbols not exported by kernel so module can't load -and other technical explanations but we can't enter more details here because it's possible to get criticism from Torvalds but who cares about
In fact I never knew that but now it's easy to understand what happened : flashed that rom then changed kernel now wifi will not load ...because it was compiled for another kernel...something like that !
also I wanted to give you a thanks for this feedback but get stupid message Sorry, you are limited to 8 thanks per day but I'll be back
Click to expand...
Click to collapse
oo thx for the info! i think im getting the hang of this. i think there's a thread explainin the various stuffs in a hp like what's odin, what's a kernel, what's a rom n how it all works together. been finding that thread again.. haha. any chance u know..?

Problem with freeze

I have a problem with the phone. What is this doing to me with all that flashing roms and kernels to mobile.
I'm now with Kyrillos ROM 9.7.2 with G3Mod's 2.5 and I freeze, get an error of some application, may be the theme, or whatsapp and I have to restart the phone. He remains in unusable condition, you can move the status bar up and down, turn off wifi etc ... but if they call you, it sounds, it does nothing (locked), the theme does not work (you can not enter the menu or anything).
And so with all the roms I've tried and kernels. But who else does this, is with the kernel fugumod.
I thought it was problem of restoring the program applications with Titanium Backup. And I started installing the applications of 0, but it turns out I do the same, and each "X" hours I find the phone frozen, not receiving calls etc. ..
What can be the problem? I'm thinking it may be a problem with the SDCard or something: S, but the Sdcard works very well, is a Samsung 16GB HC 6
Any suggestions to solve this?
Thanks
Miquene said:
I have a problem with the phone. What is this doing to me with all that flashing roms and kernels to mobile.
I'm now with Kyrillos ROM 9.7.2 with G3Mod's 2.5 and I freeze, get an error of some application, may be the theme, or whatsapp and I have to restart the phone. He remains in unusable condition, you can move the status bar up and down, turn off wifi etc ... but if they call you, it sounds, it does nothing (locked), the theme does not work (you can not enter the menu or anything).
And so with all the roms I've tried and kernels. But who else does this, is with the kernel fugumod.
I thought it was problem of restoring the program applications with Titanium Backup. And I started installing the applications of 0, but it turns out I do the same, and each "X" hours I find the phone frozen, not receiving calls etc. ..
What can be the problem? I'm thinking it may be a problem with the SDCard or something: S, but the Sdcard works very well, is a Samsung 16GB HC 6
Any suggestions to solve this?
Thanks
Click to expand...
Click to collapse
try to raise cpu voltages for +25mV on each step and try to use some other governor....maybe governor u use cause freezes.....or it might be low ram level and phone get's stuck....
Sent fom my S-II running >>SlimBean build 5 OFFICIAL << powered with DorimanX kernel v. >>9.16<<

Categories

Resources