I dont like putting those things around the phone, want to pull the phone out of one those sleeve like accessories...is there any recommendations.
Related
I got the two cases.
http://www.seidioonline.com/index.as...PROD&ProdID=75
http://www.seidioonline.com/index.as...PROD&ProdID=79
You and see from pic Sany0162 that the one case is NOT going to work the bottom is WAY to curved for the Flame. Which leaves the other case. In Sany0161, 0164 those two points were straight and were about 2 mm to narrow to fit the flame, but using a heat-gun (or a hair-dryer) I was able to move the plastic out about 1mm on each side. This allowed the case to fit nicely. The clip on the top is a bit tight, it holds the case in REALLY well but I felt it was a little TOO tight and might scratch the top so I heated it and bent it up 1mm in pic Sany0165 you can see it, this causes it to go in real nice but its now has a little play, (not enough to be a security problem its still really in there, but you might want to consider not doing this step..)
Finally you can see in Image1 that the headphone jack is covered, but with a little dremel action that was also fixed (see 0169 and 170).
And thats it... until they make a case this one isn't too bad.
PS: only allowed 5 files so the rest are in the zip
Is there a pouch rather than case? I just want to put the Flame in and take it out to use when it rings. I actually want to use it like how a phone is meant to be used. I don't want to put a case to my face.
You could use the case from an O2 XDA2s... that is what I was using prior, I'm sure you can order it as an accessory...
http://www.seeo2.com/product/XdaIIs/template/XdaIIsAccessories.vm
As for the case above, you don't hold that to your face? You slip it in and out of the clip, its a holster style case. Its really only advantage is easier 1-handed removal/insertion, and a smaller profile, (its mostly just the width of the original phone were the pouch is more cause of the flip... but if you want a pouch the XDA2s works quiet well.
Thanks....
Is the belt clip removable?
Not on that one. But there are usually lots of generic pouches, I'm sure you would find a bunch at a large cellular store that would fit the bill.
I'm using an aluminium case that allows to answer calls without opening it, so the screen doesn't get dirty. It adds some size, but if you use the clip belt, that's not a problem. Anyway I only use the Flame for work, so it goes into my case with everything else; for my spare time I use an HTC Touch that fits on any pocket and doesn't bother.
Hi guys,
I'm not big on gel cases and such. If I'm taking my phone out of my pocket for prolonged use, I'm happy to remove it from a leather case and use the phone in all the glory it was intended. Having said that, I would like to keep the phone protected/clean while in my pocket or bag and so think a leather case would suit me best, especially since it would cover the screen.
What I want to know is, does anyone know of a leather case that opens, allows me to touch and use the screen fully and also, if I need to, pop the hinge and bash out a text or two on the keyboard while it's still in the case?
I'm kinda thinking something like this...
http://www.mobileden.co.uk/mobilephones/pc/catalog/htc-desire_367_detail.jpg
... but where you can also swing the hinge open and use the keyboard, without having to completely remove the phone from the case.
Thanks guys.
Bumping this in case anyone's come across anything since I originally posted.
http://forum.xda-developers.com/showthread.php?t=796845 get the G1 case http://cgi.ebay.com/NEW-OEM-T-Mobil...688504?pt=PDA_Accessories&hash=item19c0509378
Another vote for the G1 case . You can even charge the G2 while its in the G1 case . The charging port on the G2 is very accessible while still being fully protected .
Hey everyone,
Ive been searching for a belt clip that lets the screen face outwards. Id like something thats just a belt clip. I cant find anyone on ebay or amazon. Everywhere ive seen only has the belt clips that have the screen facing in.
I want to make a car from an old gps holder. I made one for my old eris for less than 5 dollars.
Secondly Im also trying to find another one to make a mount for my sportbike. Its a pain not to see your getting a call while riding the twisties.
For that I would go with the diamond case and holster combo from best buy. The phone is designed to face in but works just as well facing out. Check ebay or amazon first as they are relatively pricey
I've been KANGBANGED!!!!!
Have you looked at any of the bike mounts?
http://www.google.com/search?hl=&q=...gc.r_pw.&fp=64cfe6251a34cfaa&biw=1920&bih=887
I use the Otter Box defender case/clip combo. The clip can be used either way, with the screen facing in (very protected) or with it facing out(to use like a dock). On top of that the clip piece locks into full open position, allowing you to use it as a stand. Handy if you want to sit on the desk and have it maintain orientation, and also when using an alarm clock.
The case itself is also pretty resilient. I work for GeekSquad, and after hours one night I literally threw my phone across the 20,000sqft store to see how the case would hold up. No damages at all. Brilliant.
Another cool feature is the non slip silicone outer layer. When I am rolling around in my Jeep, I can plug the phone into my audio aux in, and throw it onto a seat or the center console, and it never slips around.
I know I probably sound like a crazed fanboy, but I am very impressed with the case/clip and have had it for about a month.
I would post a link but apparently I cannot until I make eight posts. Google Otterbox, their site is easy enough to navigate.
Just wondering because of summer and all beach time
Sent from my HTC One X using Tapatalk 2
They have those super generic waterproof bags you slip the phone into. Other than that I haven't seen anything.
There is nothing specific that i know of. But a few brands do some really good generic cases for most phones. I use AquaPac - (Dont know if you get them outside of Aus) - But they are waterproof and can still use the phone through the case.
Ive also be dabbling with a vacuum sealed case. which seems like a good idea. Might be worth having a look.
You looking for something that will actually let you use the phone while its protected, the clear pouch type (like Aquapac mentioned above) is probably your only option.
If you just want something that protects your phone while not in use (take it out when you use it) you have other options. For rock climbing and hiking, I just throw my phone in a Pelican case (or similar Otterbox). Not only waterproof, put protects your phone from impacts (I added a layer of foam rubber to take up the empty space in the box). So I can just put my phone in the case (enough room for my wallet too), throw it in my backpack, and not worry about impacts, rain, or whatever. Its completely protected. I believe the Pelican 1040 is the size I have.
http://www.amazon.com/Pelican-Black-Clear-Micro-Carabiner/dp/B001CNNEXE/ref=sr_1_2?ie=UTF8&qid=1340024297&sr=8-2&keywords=pelican+1040
i ordered an aquapac but wee need something like this
http://www.lifeproof.com/shop/cases/iphone-4-4s
lorijuan1024 said:
i ordered an aquapac but wee need something like this
http://www.lifeproof.com/shop/cases/iphone-4-4s
Click to expand...
Click to collapse
That looks pretty cool. I'm assuming it has a clear film over the touchscreen, with similar material to the Aquapac (that allows the capacitive screen to still work)? The website isn't clear on this.
The reviews are hilarious! One person had their phone run over by a car, and the case protected it. Another person accidentally put his phone in the freezer (WTF???).
I should be getting my S3 Mini tomorrow!
Yet I haven't been able to find any slip cases.
I'm used to my HTC slip case, no annoying pull cord to get the fone out with - don't see the point of them!
The Original Samsung Flip cases seem OK, but don't want the case to be attached to my phone. I like to be able to have it in a pouch in my pocket etc.
Anyone seen or have a decent slip case/pouch?
MalekoUK said:
I should be getting my S3 Mini tomorrow!
Yet I haven't been able to find any slip cases.
I'm used to my HTC slip case, no annoying pull cord to get the fone out with - don't see the point of them!
The Original Samsung Flip cases seem OK, but don't want the case to be attached to my phone. I like to be able to have it in a pouch in my pocket etc.
Anyone seen or have a decent slip case/pouch?
Click to expand...
Click to collapse
Try this ones:
ebay.com/itm/400380858883?_trksid=p5197.c0.m619
ebay.com/itm/350681290570?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
ebay.com/itm/400374927666?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
ebay.com/itm/221138637477?var=520116238799&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
ebay.com/itm/380490516672?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
ebay.com/itm/370706842578?var=640049869596&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
ebay.com/itm/370685430647?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Search through ebay, you will find much more.
Got the S3M today, and thankfully it just fits in my Desire S case!
on ebay there are millions