[GUIDE] Lenovo S650 running VIBEUI v1.5 KitKat (4.4.2) - Android General

Here is a tutorial to flash VIBEUI ROM running KitKat (4.4.2) on Lenovo S650
If ur current ROM is ROW , follow 01-22
If ur current ROM is CN , follow step below 05-22
If ur current ROM is VIBE, follow step 13-22
Download all items below from here :-
1. Flash_Tool
2. S650_S119_131014
3. VRoot
4. TWRP_v2.6.3.0_CN
5. 4.4.2_GApps
6. SuperSU_v1.94
7. S650_VIBEUI_V1.5_xxxx_ST
Copy item 5,6,7 into ur ext sdcard
Install USB drivers 1st...
Download USB driver
Disconnect the hp from usb
Install exe file
Once finished, connect the hp to usb
How to flash scatter file...
Unpack FlashTools, and Click on Flash_tool.exe
Select a the MT6582_Android_scatter_emmc.txt in ROM
Wait file to be added into Flash Tool
Check the field “DA DL All With Check Sum”
Choose Option->DA DownLoad All->Speed->Force to High Speed
Turn off your phone, remove the battery.
Hit Download / F8 button
Connect your phone into the computer via USB data cable.
The process will start and and wait until green circles display
Finish !
You can now safely disconnect your phone put the battery in and turn it on.
01. Off ur hp and take out the battery
02. Extract and Flash "S650_S119_131014-Lang_Fix"
03. Once finished, close flash_tool app and disconnect usb cable
04. Insert battery and turn it on, let it boot once
05. Root using "VRoot"
06. Install "MobileUncle MTK Tools" from Play Store
07. Off ur hp and take out the battery
08. Run flash_tool again
09. Extract and Flash "TWRP_v2.6.3.0_S650_CN"
10. Press F9 and answer YES (Don't press F8)
11. Once finished, close flash_tool app and disconnect usb cable
12. Insert battery and turn it on
13. Click 10x "Build Number"
14. Enable "USB debugging"
15. Reboot in Recovery via "MobileUncle MTK Tools"
16. Wipe dalvik cache , cache and data
17. Install "VIBEUI_V1.5_xxxx_ST"
18. Install "GApps"
19. Install "SuperSU"
20. Wipe dalvik cache and cache again
21. Reboot
22. Once ur hp boot, press + for English

Thank you, After 3 MTK devices stack with 4.2- I am happy to see MTK getting Kitkat!

Thank you!
Sent from my Speed using Tapatalk

Is it possible with CWM? CWM is installed to my S650 ROW.

file VIBEUI_V1.5_1415_3_DEV_S650_NK_W_A291
has been deleted from mediafire - reupload maybe ?

cklwawa said:
file VIBEUI_V1.5_1415_3_DEV_S650_NK_W_A291
has been deleted from mediafire - reupload maybe ?
Click to expand...
Click to collapse
viberom dot com with google translate

@aariss
is this rom ported from another model's rom or based on stock update for s650?
---------- Post added at 11:26 PM ---------- Previous post was at 11:14 PM ----------
here's another download link:
http://pub.ota.lenovomm.com/VIBEROM/DEV/DEV1415/VIBEUI_V1.5_1415_3_DEV_S650_NK_W_A291.zip

hi. after try this, my google play services has stopped working. how to solve it. i cant root my phone anymore, thus, i cannot re install firmware.

Great
Works great, thanks for everything

Great.

cklwawa said:
file VIBEUI_V1.5_1415_3_DEV_S650_NK_W_A291
has been deleted from mediafire - reupload maybe ?
Click to expand...
Click to collapse
Will update new link in 1st page
7OOKA said:
@aariss
is this rom ported from another model's rom or based on stock update for s650?
Click to expand...
Click to collapse
Based on stock rom
X-Mart said:
hi. after try this, my google play services has stopped working. how to solve it. i cant root my phone anymore, thus, i cannot re install firmware.
Click to expand...
Click to collapse
Cannot be... re-flash ur stock ROW rom and continue again

Help Me!
Hello friends, i need your help. I bought Lenovo s650 form Aliexpress and saller instaled aplications for EU (Play Store, etc) and many languages. Now i updated my phone and i lost all apps and languages and got new version (VIBEROM_V1.0_1415_ST_S650) with chinese apps and only chinese and english languages. This upgrade kit kat comes with multiple languages?

Rosanel said:
Hello friends, i need your help. I bought Lenovo s650 form Aliexpress and saller instaled aplications for EU (Play Store, etc) and many languages. Now i updated my phone and i lost all apps and languages and got new version (VIBEROM_V1.0_1415_ST_S650) with chinese apps and only chinese and english languages. This upgrade kit kat comes with multiple languages?
Click to expand...
Click to collapse
i get from that u didnt make a backup !!, and no this kitkat has only English and Chinese, if u want to get your preinstalled rom back u can download this: http://www.needrom.com/mobile/s650-multi-lang-official-rom/

7OOKA is correct...

Just checking. This is not a stable version, right? Just a development version?
Sent from my ST26i

when i try to flash, its not running and there is no green circle appears, the process keep 0%.
solved. but google play stop working, keep crashing, cannot login to playstore.why?

nakTT said:
Just checking. This is not a stable version, right? Just a development version?
Sent from my ST26i
Click to expand...
Click to collapse
yes it's a development version, but so far the only bug i noticed is the buttons backlight, but apart from that everything is pretty stable
---------- Post added at 08:50 PM ---------- Previous post was at 08:46 PM ----------
X-Mart said:
when i try to flash, its not running and there is no green circle appears, the process keep 0%.
solved. but google play stop working, keep crashing, cannot login to playstore.why?
Click to expand...
Click to collapse
go to settings, apps then all apps, then clear data and cache for google account manager and google play services and google play store ang google services framework

Glad to hear that. Hope the stable version will be much better? Btw, how is the RAM level as well as system responsiveness? Head that kitkat has a lower hard requirement. It is true in practice? Or still just on paper as just a marketing bs?
Sent from my ST26i

Flash procedure
If anyone is interested, you can actually skip the Vroot part by doing the following procedure, this way means you don't end up with any Chinese apps or Chinese root program in your phone, just simple superuser !!!
Once you have chosen the scatter file in flash tool, click on the RECOVERY line, this will open up a window so that you can choose which recovery.
Choose the TWRP recovery you downloaded and then proceed with the flash procedure as normal.
Once finished reboot the phone.
Now power down
Now power on holding volume up and down together, release power button only on vibrate, this will boot recovery
You should see TWRP reovery, go to wipes / advanced wipe wipe cache and dalvik
Now go back to main menu and choose reboot, you should see a prompt that SUPERUSER IS NOT INSTALLED, JUST SLIDE THE BAR TO INSTALL
Now once the phone is rebooted you will see superuser icon on screen, click it and it will tell you to update, easiest is via play store ( make sure you added account ) , it will tell you upgrade success and tell you to update binary, do this too and now you are rooted

MIUI V5 - S650, its possible?
Please apologize for the bad English. I'm having to use the translator. I'm from Brazil, bought the mini vibe x (Lenovo S650). I wonder if you can install MIUI V5 on my phone or do not support, finally, whether I run the risk of brickar my device. If i can install, get out of the version 4.2 to MIUI v5, I do something special or just follow the steps from the first page? MUCH thanks for the help!

Related

[ROOT][CWM][ROM's] Lenovo IdeaPhone (LePhone) K860(i)

There are different custom ROM's & root methods for the K860 & K860i. Most of the root methods & ROM's are compatible with both the K860 and K860i. Read the full thread to be sure.
I'll update this post regularly, if there are any changes needed please say so in the thread or PM me (still WIP for adding the latest stuff).
Below you can find everything!
- Root methods & stock ROM's + MOD's/fixes:
There is an APK root method, linked below, or you can use the original not so easy root method:
I did some research on how to root it.
I found some steps on this Chinese website.
What I understand from it is you have to do the following steps to root:
- Set the phone to USB debugging in it's settings
- Make sure drivers are installed and the phone is recognized well by the phone PC software
- Close all the PC phone software applications
- Make sure no other android or smart/USB-device is connected except for the phone itself
- Download this file: root files, download link is also below in the attachment.
- Unzip it and launch the .exe (executable file) with the Chinese characters (should be first .exe in directory)
- The shell/CMD should start the root process
- The phone will automatically restart, don't touch it or any button, don't interrupt the shell program!
- Now after the reboot of the phone you should press any key on your keyboard when asked
- The shell program should continue, the phone will restart again!
- Again press any key to continue and wait for the shell program to reboot your phone for the third time (this can take some time, be patient!)
- When rebooted the "Operation was successful" message should appear in the shell program
- Now your K860 is rooted! Look for the root app in your phone to confirm. If rooting didn't work, try this process again
- Also update the Superuser or superSU app & binaries
Click to expand...
Click to collapse
Root method works, users already confirmed this!
- Easier/better root methods:
Added by kakandariko:
Alternative method.
Added by rugged666:
The same root method as for the P700
Added by jbctiong:
Root apk for K860 + 4.1.2 ROM
- Fixes:
Added by kiotu:
USSD CODE Fix for Native Chinese JB ROMs
Location Service Off FIX
- Stock ROM's:
Added by jbctiong:
Root apk for K860 + 4.1.2 ROM
Added by thongminh:
New rom 4.2.1 Update 24/05/2013
Added by kiotu:
JB 4.2 Latest 130531/30
Added by vikrant82:
K860_1_S_2_003_0020_130605_szb.zip
Added by Holandeserrante:
K860_1_S_2_003_0033_130618_szb.zip & K860i_1_S_2_003_0052_130617_szb.zip
K860_1_S_2_003_0035_130620.szb & K860i_1_S_2_003_0056_130620.szb
K860_1_S_2_003_0036_130621.szb & K860i_1_S_2_003_0057_130621.szb
K860_1_S_2_003_0043_130624.szb & K860i_1_S_2_003_0064_130624.szb & K860_1_S_2_003_0044_130625.szb & K860i_1_S_2_003_0065_130625.szb
- Links to how to add Google Apps:
http://forum.xda-developers.com/show....php?t=1632945
http://forum.xda-developers.com/show....php?t=1582422
Easy method:
Added by Ramanon:
Link
Added by jbctiong:
gapps-jb for 4.1.2/CM10/AOKP ROM
- CWM Recovery
Added by angelsel:
CWM recovery in English for the K860
Added by jbctiong:
Method to Flash Recovery.img for K860
- Custom ROM's.
Added by jbctiong:
"Overseas" Firmware for English users with the Google Apps included.
CM10 (JB 4.1.2), Multi Language, Minor Bugs
More ROM's
Another one.
Newer CM10 ROM
Lidroid v3.1 ROM for K860
AOKP JB 4.1.2 for K860
Added by amoyan:
Lenovo K860 based build ROM with Google Play, no branding, improved battery life
Added by Ramanon:
MIUI ROM for K860i (and K860 as well), beta
Added by Zanderion:
Rooted ROM for k860i
Added by ivantastic:
LIDROID 4.2 (K860)
Added by orgod:
CM10 v.2.5 ROM for K860
Added by thongminh:
Rom Miui Multilanguage update 19/04/2013
Added by kiotu:
kiotu Custom ROM K860 V2.03 - UPDATED 29/06/2013
Added by Holandeserrante:
MIUI ROM K860i 3.6.28
- kiotu kernel
Added by kiotu:
Experimental JB 4.1.2 kernel V4 - UPDATED 12/06/2013
- Other useful international thread about the K860, root, ROM's, ...:
Added by marcoruzza:
Link
I want to note that I'm not responsible for any bricked phone by using these root/ROM's!
It is all at your own risk!
Also backup all data before rooting or flashing the phone!
For the links to the ROM's and other root methods, please Thank those persons!
If you think I helped you with this thread, please hit the Thanks button and make me happy
Is the UI in Chinese?
Arne_B said:
Because I recently bought the Lenovo K860 and am waiting to receive it, I did some research on how to root it
Click to expand...
Click to collapse
I just got this phone/phablet as a gift. Specs are quite a beast: 1.4GHz quad core, 1280x720, 8GB ROM, 8MP camera etc.
Would you know if the Android UI is in Chinese? Right now I have the phone for sale on eBay because as far as I can tell, it's not going to work on AT&T or T-Mobile 3G (or more) in the US.
dandv said:
I just got this phone/phablet as a gift. Specs are quite a beast: 1.4GHz quad core, 1280x720, 8GB ROM, 8MP camera etc.
Would you know if the Android UI is in Chinese? Right now I have the phone for sale on ebay because as far as I can tell, it's not going to work on AT&T or T-Mobile 3G (or more) in the US.
Click to expand...
Click to collapse
Yeah, it's only compatible with GSM Tri-band or maybe Quad-band. But WCDMA is only operating at the 2100MHz band (3G). So I guess mobile surfing will probably work but calling (2G) won't work in the US.
Default UI is Chinese, but it should have English in the settings also and maybe even Vietnamese.
I have a K860
I've bought a Lenovo K860, it works fine in Spain. It comes with english and chinese languages. Easily root as you say before. Over 12400 antutu benchmark in my device, but I see until 14500 in others. The camera works perfect and makes awesome photographies. Games and apps runs very fast, GTAIII, Bard`s Tale, PES12, FIFA12, Asphalt 7....
Cons?
Magnetometer compatibility, by the time I don`t found compass app working.
Only chinese development by the moment. In fact there is a recovery.img available and two or three MIUI roms, aal in chinese only:crying:
If you want any other info, contact me, and sorry my bad english.
superabienator said:
I've bought a Lenovo K860, it works fine in Spain. It comes with english and chinese languages. Easily root as you say before. Over 12400 antutu benchmark in my device, but I see until 14500 in others. The camera works perfect and makes awesome photographies. Games and apps runs very fast, GTAIII, Bard`s Tale, PES12, FIFA12, Asphalt 7....
Cons?
Magnetometer compatibility, by the time I don`t found compass app working.
Only chinese development by the moment. In fact there is a recovery.img available and two or three MIUI roms, aal in chinese only:crying:
If you want any other info, contact me, and sorry my bad english.
Click to expand...
Click to collapse
So you can confirm it is rootable with the above tutorial?
I think my previous smartphone (Galaxy Mini) didn't even have a magnetometer, so if that doesn't work properly I think it won't annoy me.
Arne_B said:
So you can confirm it is rootable with the above tutorial?
I think my previous smartphone (Galaxy Mini) didn't even have a magnetometer, so if that doesn't work properly I think it won't annoy me.
Click to expand...
Click to collapse
Yes, confirmed, it works perfect for me.
And I`m agree with you, magnetometer isn`t big problem, but it work fine in test, fails the app compatibility, I think it´s a rom fail and it will be solved with updates.
---------- Post added at 12:28 PM ---------- Previous post was at 12:23 PM ----------
superabienator said:
Yes, confirmed, it works perfect for me.
And I`m agree with you, magnetometer isn`t big problem, but it work fine in test, fails the app compatibility, I think it´s a rom fail and it will be solved with updates.
Click to expand...
Click to collapse
PD: You must activate gapps by changing the permissions in /system/ by default google apps are prohibited in china.
Messiah sioneyS
superabienator said:
PD: You must activate gapps by changing the permissions in /system/ by default google apps are prohibited in china.
Click to expand...
Click to collapse
So I'll have to enable 775 (rwx-rwx-rw) permissions in that folder?
guys, i am based in china and thought about this phone or the haier x5 pad511.
if the ui is also working in english i ld get it. am just worried lenovo wont release a JB update and if i root it (i have never rooted anything besides a bag of marshmallows) i loose any functionality. is there a JB rom? the miui is pretty ok.
Arne_B said:
So I'll have to enable 775 (rwx-rwx-rw) permissions in that folder?
Click to expand...
Click to collapse
I think yes, you must download gmail.apk, play store, maps.apk, etc, second you must copy and paste with root explorer in/system, and at last open the permissions of any lenovo apk in /system and put the same permissions in google apks.
I hope you understand my bad english.
hi is it easy to replace stock OS? i m in china and want to use english OS and am not sure if the installed OS has google market and so on.
Any advice? would love to run a JB version or MIUI on it
The stock OS has an option to use an English UI. Market and some other Google Apps might not yet be installed.
To do this you can read the following topics:
http://forum.xda-developers.com/showthread.php?t=1632945
http://forum.xda-developers.com/showthread.php?t=1582422
so anyone running the phone on its stock ui or know if the stock ui comes with google play? if not can i just take a g play apk from here and install it on mt k860?
Hello, can I ask to you about the Lenovo.
How about the battery life?
Have stock ui call record?
Have it IP telephony client like in miui?
Thank you a lot
Отправлено с моего MI-ONE Plus через Tapatalk
FelBJ said:
hi is it easy to replace stock OS? i m in china and want to use english OS
Click to expand...
Click to collapse
I read somewhere that the Android it ships with supports Chinese, English, and possibly Vietnamese.
I think you probably read that over here
dandv said:
I read somewhere that the Android it ships with supports Chinese, English, and possibly Vietnamese.
Click to expand...
Click to collapse
yeah thanks i nearly forgot i read it proximately 3 posts prior :angel: anyway, i wanna know if theres an option fro easy market apk install, i hope i dont have to root or anything i thought i can just put market as apk on the sd card and install it.
btw. is the UI great or does it make sence to find a miui jelly beans... i m not sure if lenovo does code a JB
I don't really think there is a way without root for the Lenovo.
Someone reported that it works on a Galaxy 5 (i5503) without doing root:
How To Enable Android Market on i5503 or Galaxy 5 and Galaxy S
Filed under: Android by Ahmed Ali — 38 Comments
December 22, 2010
recently i bought Samsung i5503 (Galaxy 5) and i took more than two weeks to be able to use android on my handset
so i decided to share what i got with u .let’s start
U must move your data from internal memory to external memory
there r two method
The First :
1. ensure your handset “Galaxy 5″ is set to use 24-hour format
(applications-> Settings-> date and time -> Use 24-hour format
2. launch the Phone-pad
3. enter the following
*#272* the follow it with the time on the phone (4 digits) then follow it with #
example, the time on my phone now is 15:33 hence I shall enter *#272*1533#
4. the phone shall display a new window
5. select “XSG” and hit “install”
the Phone shall reload and your “Market Apps” icon which be there
this method didn’t work with me but it works with some friends of mine
The Second Method
1. ensure your handset “Galaxy 5″ is set to use 24-hour format
(applications-> Settings-> date and time -> Use 24-hour format
2. launch the Phone-pad
3. enter *#06# and store the number which will appear
4. in the phone-pad write *#272*xxxxxxxxxxxxxxxxx” xxxxxxxxxxxxxxx is the number u got from step 3
5. the phone shall display a new window
6. select “XSG” and hit “install”
the Phone shall reload and your “Market Apps” icon which be there
enjoy
Thanks To @Khal3d
Click to expand...
Click to collapse
Sorry for the big quote but I can't post any outside links.
is lenovo release the source code for this handheld?
k860 root
So,did you receive your K860.Is it really possible to root without risk
Arne_B said:
Because I recently bought the Lenovo K860 and am waiting to receive it, I did some research on how to root it.
I found some steps on a Chinese website.
What I understand form it is you have to do the following steps to root:
- Set the phone to USB debugging in the settings
- Make sure drivers are installed and the phone is recognized well by the default phone PC software
- Close all the PC phone software applications
- Make sure no other android or smart/USB-device is connected except for the phone itself.
- Download this file: root files
- Unzip it and launch the .exe (executable file) with the Chinese characters (should be first .exe in directory). Launch it with Administrator privileges.
- The shell should start the root process.
- The phone will automatically restart, don't touch it or any button, don't interrupt the shell program!!
- Now after the reboot you should press a key.
- The shell program should continue, the phone will restart again!
- Again press a key to continue and wait for the shell program to reboot your phone for the third time (this can take some time).
- When rebooted the "Operation was successful" message should appear in the shell program.
- Now your K860 is rooted! Look for the root app in your phone to confirm. If rooting didn't work, try this process again.
I want to note that I'm not responsible for any bricked phone by using this root process! I didn't do it myself yet, so it's all at your own risk!
Also backup all data before rooting the phone!
Because I don't have this phone at the moment I can't try to root it just yet. So if anyone got it rooted using this method, let me know!
Click to expand...
Click to collapse
No not yet still waiting for it.
I'll update when I have it and post my findings about routing it and putting Google Play and so on it.
Also, I think that someone in this thread has said this method works

[Q] Pantech Sky Vega A850L -- OS Corrupted

Dear Friends,
I'm having problem with "Pantech Sky Vega A850L" .... I bought it used from the local market. It was working fine until after a day , I popped out the SIM & restarted the phone. Since then, it shows me a screen saying "System Restart because of Application Operation Error". I found a ROM online but dont know how to flash it as everything I found was in Chinese or Korean. Can any good soul here help me?
kasqureshi said:
Dear Friends,
I'm having problem with "Pantech Sky Vega A850L" .... I bought it used from the local market. It was working fine until after a day , I popped out the SIM & restarted the phone. Since then, it shows me a screen saying "System Restart because of Application Operation Error". I found a ROM online but dont know how to flash it as everything I found was in Chinese or Korean. Can any good soul here help me?
Click to expand...
Click to collapse
well if you dont really need to flash the rom you can go into recovery by holding power button and volume down or up while the device is off and you can factory reset from there. let me know if anything happens, im on pretty much most of the day.
Trozzul said:
well if you dont really need to flash the rom you can go into recovery by holding power button and volume down or up while the device is off and you can factory reset from there. let me know if anything happens, im on pretty much most of the day.
Click to expand...
Click to collapse
Yes, I did the factory reset but to no avail. Then, a friend found me this link "unable to post link here"
One of the posts in this links said.....
""""Offline brush ROM Method:
- You must use Internet Explorer (IE) Browser
- *** If never install USB Driver *** First download and install: L Edition / K Edition / S version
- Download Offline brush ROM Toolkit: Flash ROM Tools (2012/12/24)
- Download mobile phone *. Binx ROM: L version V2.22 / K version V2.22 / S version v2.22
eg A850L version, you need the *. binx of the ROM file into "\ FLASH ROM \ sky_update \ IM-A850L" within the Folder
Decompression tool kit, and copy the ROM file into the appropriate Folder within
Then perform clear_flashrom_settings.cmd
Performed after online_flash_rom.cmd, mindful of the need to enable the IE Compatibility View feature
When to see a "purple blue button" can close an IE Browser
Finally execute flash_rom.cmd, once an option is picked
Point back to it once a cmd box is by clicking a keyboard, it will automatically play out a IE Browser
It frames the left, then click "Allow"
If all goes well, will see a "pink button"
Data Loading ...
Entire brush ROM about twenty minutes to complete the process """"""""""
the brush ROM tool kit I downloaded opens up IE pages in Korean ..... helpless!
kasqureshi said:
Yes, I did the factory reset but to no avail. Then, a friend found me this link "unable to post link here"
One of the posts in this links said.....
""""Offline brush ROM Method:
- You must use Internet Explorer (IE) Browser
- *** If never install USB Driver *** First download and install: L Edition / K Edition / S version
- Download Offline brush ROM Toolkit: Flash ROM Tools (2012/12/24)
- Download mobile phone *. Binx ROM: L version V2.22 / K version V2.22 / S version v2.22
eg A850L version, you need the *. binx of the ROM file into "\ FLASH ROM \ sky_update \ IM-A850L" within the Folder
Decompression tool kit, and copy the ROM file into the appropriate Folder within
Then perform clear_flashrom_settings.cmd
Performed after online_flash_rom.cmd, mindful of the need to enable the IE Compatibility View feature
When to see a "purple blue button" can close an IE Browser
Finally execute flash_rom.cmd, once an option is picked
Point back to it once a cmd box is by clicking a keyboard, it will automatically play out a IE Browser
It frames the left, then click "Allow"
If all goes well, will see a "pink button"
Data Loading ...
Entire brush ROM about twenty minutes to complete the process """"""""""
the brush ROM tool kit I downloaded opens up IE pages in Korean ..... helpless!
Click to expand...
Click to collapse
can you post the link of 850 L offline brush rom toolkit please.
Mooziefy said:
can you post the link of 850 L offline brush rom toolkit please.
Click to expand...
Click to collapse
Inbox, i will give you link
Install stock rom
I figure out your problem, i think you should install a stock rom .BINX for Vega Pantech to restore OS.
Mooziefy said:
can you post the link of 850 L offline brush rom toolkit please.
Click to expand...
Click to collapse
@Mooziefy @0902135377 @kasqureshi
Installing a .BINX file is one option but you can also flash a stable custom ROM from CWM Recovery. The first link below has a link to the "Fastboot Mode Drivers" as well.
Incase you are still looking. here is your answer
Code:
http://forum.xda-developers.com/android/development/kitkat-rom-english-guide-custom-rom-t2995865/post58010939#post58010939
and here too
Code:
http://forum.xda-developers.com/android/development/27-07-2014-cyanogenmod-4-4-4-1-vega-r3-t2830919
There may be other threads as well.
-------
Regards,
I need help...with A890s
Hello to all you experts.
I just acquired A890s and it is on ROM in which alot of features are not working.
i want to reset back to stock. I have downloaded latest binx file but i do not how to flash it.
Sky Vega Flash Tool B2 fails to work. Any help in this regard would be appreciated.
Thanks.
Guyz can you help me about my phone sky vega IM-850L MODEL coz when i update my phone with W/S. Then its said it will turn of after 5 mins then its restart after that my phone hang.. only vega u can see on the screen then its hang..?do you know how to fix it? Pls help me guyz
I went through a similar situation and had to get it flashed with a new ROM. I tried installing 6.0 but it didn't work. I went for 5.0 instead.

Lenovo S8 A7600 [Official Rom] [Instructions]

Hello
Seeing there is very little info about this model, I decided to make available my findings. Initially I was a bit annoyed with the phone in the start. The "stock" rom was a disaster (malware-ridden, non-official). First I tried to de-bloat that but the whole rom was just bad and unstable. Since then I've learned some things, and newer official builds have surfaced.
Also I should say; this phone is basically a K3 Note with 720p screen (another difference is MT6752M cpu instead of MT6752 in the K3 Note) and it's very similar to the A7000 model.
The best rom I have tried so far is this : VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU ---> DL - This is latest official stock Rom for the 7600 (not 7600M which is Chinese version)
Here is also TWRP recovery with english + chinese language: DL
Rename ROM to "update.zip", use stock recovery and flash (probably best to use stock lenovo recovery first to make sure everything gets flashed, can be flashed with twrp but I suspect it only flashes boot and system), boot it up, finish the setup wizard, turn it off. Use SPflashtool to flash TWRP, turn off again.
Start phone in recovery mode (Press volume Up + Down, and power button. Hold until recovery appears). Now you can flash Gapps (arm64, lollipop 5.0, opengapps.org), SuperSU, xposed arm64 lollipop, etc.
I have been able to get a very pleasing phone doing this. I don't really feel right now that much is missing, and I'm not annoyed by various other problems. Using xposed modules gravity box, GEL settings, Lollipop memory fix, etc.
This Rom has very little bloatware, there are some chinese apps, but they can easily be uninstalled - don't even need root. There are a few more you can uninstall using root if you want, but be careful not to break the system.
I'm not going to explain everything in great detail here. Using SPFlashTool is explained so many other places. Getting supersu and xposed also explained everywhere.
If I could I would integrate all in to one flashable package, but I'm not a rom cooker. Sorry
PS: As you can see in the image, i use iFONT xposed. But I don't enable it as xposed module, that caused problems. I just used it to download a font and applied it. It's system wide, and it works
There's a newer link in post #6 with the latest firmware
There's a newer link in post #10 with TWRP 3.0.2.3
Hi,do you have custom rom for lenovo s8 a7600?
askermk2000 said:
Hello
The best rom I have tried so far is this : VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU ---> - This is latest official stock Rom for the 7600 (not 7600M which is Chinese version)
Here is also TWRP recovery with english + chinese language:
Click to expand...
Click to collapse
sorry, I had to remove your links, because I have small amount of posts and I am not allowed to submit post with urls - even if quoted.
Hi!
Do you know way to install other languages into ROM (or add them and somehow rebuild ROM), I am searching informations for last few days with no succes. The main problem is when international apps using EN for directory, when all information in directory should be in my language (polish). Changing locale helps, but settings are crashing with changed locales..
Also I installed xposed, but system tells me that xposed is not installed... I heard about it from your post and found only version v79 for sdk 21. I need to remove search box from desktop at google now.
Any custom rom for this device ?
Hi everyone, hi @askermk2000
I just received my Lenovo S8 A7600 "Golden Warrior" phone from an Asian vendor, it came with VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU and SuperSU was seemingly installed when I first turned on phone (asked me to update binary).
Specs are MTK6752M 64-bit OctaCore, 2GB RAM, 8GB storage.
Can I install your version VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU through the Lenovo stock recovery/flash (phone) as you suggest?
You mention "not 7600M" so I am not sure...
I also see in other places that there's even a newer VibeUI version VIBEUI_V2.5_1537_5.1978.1_ST_A7600_CU, any idea where to get it and if it is compatible? I cannot find any download link...
Thanks...
konsti said:
Hi everyone, hi @askermk2000
I just received my Lenovo S8 A7600 "Golden Warrior" phone from an Asian vendor, it came with VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU and SuperSU was seemingly installed when I first turned on phone (asked me to update binary).
Specs are MTK6752M 64-bit OctaCore, 2GB RAM, 8GB storage.
Can I install your version VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU through the Lenovo stock recovery/flash (phone) as you suggest?
You mention "not 7600M" so I am not sure...
I also see in other places that there's even a newer VibeUI version VIBEUI_V2.5_1537_5.1978.1_ST_A7600_CU, any idea where to get it and if it is compatible? I cannot find any download link...
Thanks...
Click to expand...
Click to collapse
Hello
It's wise of you to remove that dubious vendor firmware.
Since "A7600M" is a model number, or simply name of the phone, I would be surprised if it doesn't say so anywhere. Look at the packaging, phone and battery compartment etc. If you don't see A7600M anywhere, it's likely not that model.
See here: Lenovo Inquiry Page
At the bottom there you'll find link for the latest official (Full) firmware.
Thank you @askermk2000 for your kind and immediate reply.
This known asian vendor on their page mentions: Lenovo "Golden Warrior" S8 A7600, 4G, LTE, MTK6752M @1.5GHz 64bit OctaCore, 2GB RAM, 8GB storage, 5.5inch HD IPS screen, OTG, Android 5.0 Phone
In settings, the ROM version is: VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU, no bloatware; was surprised to see SuperSU pre-installed but the vendor does have a service (at a cost) to provide pre-rooted phones (which I did NOT order but maybe got).
The (Lenovo) box doesn't mention much, even under the phone I can see a lot of Chinese, so it's definitely for China -- vendor wrote it's unlocked for world use on their page.
The mentioned model is A7600 on the rear, there's only a A838 reference besides model (i.e. QQ-A838-xxxxxx) but not much more than that.
I suspect these may be older stock they wanted to get rid of.
As you can see, the model is (S8) A7600, not A7600M. The chipset has "M" i.e. is MTK6752M.
So can I not use the official latest (full) firmware that you posted, via stock recovery?
Is this not for MTK6752M processor? Will this firmware brick the phone, you think?
Thank you very much in advance!
konsti said:
Thank you @askermk2000 for your kind and immediate reply.
This known asian vendor on their page mentions: Lenovo "Golden Warrior" S8 A7600, 4G, LTE, MTK6752M @1.5GHz 64bit OctaCore, 2GB RAM, 8GB storage, 5.5inch HD IPS screen, OTG, Android 5.0 Phone
In settings, the ROM version is: VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU, no bloatware; was surprised to see SuperSU pre-installed but the vendor does have a service (at a cost) to provide pre-rooted phones (which I did NOT order but maybe got).
The (Lenovo) box doesn't mention much, even under the phone I can see a lot of Chinese, so it's definitely for China -- vendor wrote it's unlocked for world use on their page.
The mentioned model is A7600 on the rear, there's only a A838 reference besides model (i.e. QQ-A838-xxxxxx) but not much more than that.
I suspect these may be older stock they wanted to get rid of.
As you can see, the model is (S8) A7600, not A7600M. The chipset has "M" i.e. is MTK6752M.
So can I not use the official latest (full) firmware that you posted, via stock recovery?
Is this not for MTK6752M processor? Will this firmware brick the phone, you think?
Thank you very much in advance!
Click to expand...
Click to collapse
No, your phone is the right model, as you said "Unlocked for world use", the A7600M only works in china.
MTK6752M is the chipset used - it has nothing to do with A7600M, that there are two M's there is a coincidence.
So you can go ahead and use the latest firmware.
OK for the sake of information to everyone, I did the following:
0. Formatted SD card from within the phone (just to be sure). Then charged battery fully to 100%.
1. Copy (via PC) the latest firmware zip file (currently is VIBEUI_V2.5_1628_5.2186.1_ST_A7600_CU_WC5DAF1811.zip about 1GB size) to root of my SD card. This file looks like a recovery type, but files inside (some IMG, DAT and scatter files) could be flashable from PC (i.e. like SP Flash Tool etc.).
2. Renamed it update.zip
3. Put SD and battery back to phone.
4. Started phone in recovery mode: Pressed Volume Up + Down and Power buttons simultaneously; held them until recovery screen appeared. First, Lenovo logo, then a screen to choose language (Chinese/English); pressed English.
5. Selected the Install Upgrade Pack menu and pressed "YES" to the warning about encrypted phones.
6. Waited for update with circle-type update progress; for some reason it got seemingly stuck at 75% for some period. Waited patiently to finish.
7. I selected "Back" to go and clean user data.
8. Once done, I pressed back touch-button and selected "Restart".
9. Waited to see what happens. Was curiously greeted with a white chinese splash-screen saying "4G" something. Waited...
10. Phone next booted to the usual Lenovo logo, with some chinese text at the bottom and three dots [...] flashing with thin white progress-line (most likely "rebuilding apps"?). This took a while, too.
11. The phone finally went into the wizard in Chinese, and then offered choice of English or Chinese as wizard language.
Wizard finished OK, then went to Settings -> About device -> ROM is upgraded indeed to VibeUI v2.5-1628 and Android 5.0.2.
NOTE: There's a LOT of chinese stuff, unfortunately, I guess it's part of the ROM; obviously this ROM is non-rooted...
However, the asian vendor installed/shipped ROM (VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU) was very light and fast -- I guess a deodex version? Or a VibeUI port?
Many thanks @askermk2000 for your help nevertheless.
Any idea, compared to your experience., if...
a) if your URL for latest firmware is maybe only for China? Your first post photos/screenshots don't have such Chinese apps On this ROM version, the shutdown logo is again that white chinese splash-screen with a big red "4G". Perhaps there's some other version for non-Chinese region?
b) if there's a stock, deodex ROM like that one? How did the Asian vendor find such light ROM, I am curious -- in that shipped ROM version, I had many menu languages. Now I only have English and Chinese as choices
c) if I need TWRP so I can flash Play Store, gapps and SuperSU? I don't think stock Recovery allows for these, any idea?
Cheers mate.
konsti said:
OK for the sake of information to everyone, I did the following:
0. Formatted SD card from within the phone (just to be sure). Then charged battery fully to 100%.
1. Copy (via PC) the latest firmware zip file (currently is VIBEUI_V2.5_1628_5.2186.1_ST_A7600_CU_WC5DAF1811.zip about 1GB size) to root of my SD card. This file looks like a recovery type, but files inside (some IMG, DAT and scatter files) could be flashable from PC (i.e. like SP Flash Tool etc.).
2. Renamed it update.zip
3. Put SD and battery back to phone.
4. Started phone in recovery mode: Pressed Volume Up + Down and Power buttons simultaneously; held them until recovery screen appeared. First, Lenovo logo, then a screen to choose language (Chinese/English); pressed English.
5. Selected the Install Upgrade Pack menu and pressed "YES" to the warning about encrypted phones.
6. Waited for update with circle-type update progress; for some reason it got seemingly stuck at 75% for some period. Waited patiently to finish.
7. I selected "Back" to go and clean user data.
8. Once done, I pressed back touch-button and selected "Restart".
9. Waited to see what happens. Was curiously greeted with a white chinese splash-screen saying "4G" something. Waited...
10. Phone next booted to the usual Lenovo logo, with some chinese text at the bottom and three dots [...] flashing with thin white progress-line (most likely "rebuilding apps"?). This took a while, too.
11. The phone finally went into the wizard in Chinese, and then offered choice of English or Chinese as wizard language.
Wizard finishedOK, then went to Settings -> About device -> ROM is upgraded indeed to VibeUI v2.5-1628 and Android 5.0.2.
There's a LOT of chinese stuff, unfortunately, I guess it's part of the ROM; obviously this ROM is non-rooted.
But the installed/shipped ROM (VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU) was very light and fast -- I guess a deodex version? Or a VibeUI port?
Many thanks @askermk2000 for your help nevertheless. Your photos/screenshots however don't have such Chinese apps...
Any idea, compared to your experience., if...
a) if your linked latest firmware is maybe only for China? The shutdown logo is again that white chinese splash-screen with a big red "4G". Perhaps there's some other version for non-Chinese region?
b) if there's a stock, deodex ROM like that one? How did the Asian vendor find such light ROM, I am curious -- in that shipped ROM version, I had many menu languages. Now I only have English and Chinese as choices
c) if I need TWRP so I can flash Play Store, gapps and SuperSU? I don't think stock Recovery allows for these, any idea?
Cheers mate.
Click to expand...
Click to collapse
Hello again
Yes, the official Chinese rom only has Eng/Chinese language. There may be a way to add more, idk because I only need English. The 4G boot logo is normal, was there on the rom linked in the first post also.
All the Chinese apps (or almost all) can be uninstalled without root permission. I never experience the rom to be less than fast and good, but I always immediately uninstalled the chinese apps, they do me no good anyways.
The rom you where supplied with is what is called ROW (international). If it's possible to get an updated ROW rom idk. All I know is that if you want a clean unhampered ROM, then the one I've shown you is the way to go.
PS: Yes you need custom recovery to flash the other stuff. Here is an updated TWRP: TWRP-3.0.2.3
^^This recovery has wrong device description in build.prop (actually it uses Lenovo K3) as a consequence you will receive error if trying to flash ROM's. So try the old one if you get these errors.
HI everyone, hi @askermk2000 and many many thanks for sharing your TWRP version 3.0.2.3 with us.
I followed this thread on how to root the Lenovo S8 A7600 phone and downloaded the tools needed (SP Flash Tool v5.1452.00 and VCOM drivers) on my Windows 7 laptop; then, installed them accordingly. Many thanks to @XxpikaachuuxX for providing links and steps on his thread!
1. Started up SP Flash Tool with administrator rights.
2. Chose the scatter file that was inside your shared TWRP-3.0.2.3 zip file; recovery image is automatically selected.
3. Shut down phone, remove battery.
4. Made sure all boxes in list were unchecked, except "recovery" then pressed "Download" button.
5 . Plugged phone on USB cable to PC, then inserted battery under the phone, as instructed.
6. Windows made a "USB plugged" sound, then SP Flash Tool detected phone OK and flashed recovery fine (there was the green tick-mark shown!)
7. Removed cable, removed battery, waited 10 seconds, re-inserted battery.
Then, copied to my SD card root folder, via PC (card reader) the following:
a) UPDATE-SuperSU-v2.46.zip
b) gapps-lp-20150211-signed.zip from this thread (lp=Lollipop)
(I had downloaded and installed wrong Gapps for 5.1 Android, but we need 5.0 version for this ROM--silly me. I just re-flashed via TWRP the correct package).
Went into recovery by pressing briefly Power then when the short vibration was felt, pressed VOL+ and VOL- and POWER simultaneously; the pleasant splash-screen of TWRP was shown!
1. Installed the needed SuperSU; then went back.
2. Installed gapps.
3. Wiped cache and Davlik (inside TWRP) then rebooted phone i.e. "system".
4. Waited patiently as it took a few minutes to go on the main Home screen.
5. Created Google account in "Settings" then went straight to "PlayStore" to update all applications, including SuperSU.
6. Ran SuperSU and upon request, updated the binary "normally" and rebooted just fine.
NOTE: In the Wi-Fi detected lists, since my first ever boot of this phone, I get a (fake?) SSID entry "NVRAM WARNING: Err = 0x10" which is apparently easily fixed for other phones. Do you guys you also got that?
A bunch of final questions to you, @askermk2000 when you have time to reply.
1) Does the stock weather display on a Home page work for you? I only get Chinese cities, location doesn't work as it says "city not found". Manual input of e.g. Europe cities doesn't show results, either.
2) Despite removing most via "Settings -> App Manager", any suggestions oh how to remove some further chinese apps that are marked "system app"? This article suggests NoBloat Free, Titanium Backup, System App Remover and App Master. I am not familiar with this approach but for example, "LenovoStore" could be removed...
3) Do you have by any chance the original, black b/g, folding (yes, boring) Lenovo animation boot logo to share? I see there's a file logo.bin for SP Flash Tools but others talk about /system/media/bootanimation.zip file... I ask if you have it, as the "Boot Animations" PlayStore app may not have the stock Lenovo boot. Perhaps flashing it via SP Flash Tool is better?
4) Will you kindly share any updates here to TWRP versions, whenever released? Do you anticipate any update in the coming 1-2 months, for example? (not sure there are bugs in TWRP-3.0.2.3, if any)
5) If there is a newer Lenovo official ROM available (than today) we obviously lose the TWRP recovery if we flash it all via SP Flash Tools; but we keep TWRP recovery if we update to the new ROM via TWRP, correct?
Thank you.
konsti said:
HI everyone, hi @askermk2000 and many many thanks for sharing your TWRP version 3.0.2.3 with us.
I followed this thread on how to root the Lenovo S8 A7600 phone and downloaded the tools needed (SP Flash Tool v5.1452.00 and VCOM drivers) on my Windows 7 laptop; then, installed them accordingly. Many thanks to @XxpikaachuuxX for providing links and steps on his thread!
1. Started up SP Flash Tool with administrator rights.
2. Chose the scatter file that was inside your shared TWRP-3.0.2.3 zip file; recovery image is automatically selected.
3. Shut down phone, remove battery.
4. Made sure all boxes in list were unchecked, except "recovery" then pressed "Download" button.
5 . Plugged phone on USB cable to PC, then inserted battery under the phone, as instructed.
6. Windows made a "USB plugged" sound, then SP Flash Tool detected phone OK and flashed recovery fine (there was the green tick-mark shown!)
7. Removed cable, removed battery, waited 10 seconds, re-inserted battery.
Then, copied to my SD card root folder, via PC (card reader) the following:
a) UPDATE-SuperSU-v2.46.zip
b) gapps-lp-20150211-signed.zip from this thread (lp=Lollipop)
(I had downloaded and installed wrong Gapps for 5.1 Android, but we need 5.0 version for this ROM--silly me. I just re-flashed via TWRP the correct package).
Went into recovery by pressing briefly Power then when the short vibration was felt, pressed VOL+ and VOL- and POWER simultaneously; the pleasant splash-screen of TWRP was shown!
1. Installed the needed SuperSU; then went back.
2. Installed gapps.
3. Wiped cache and Davlik (inside TWRP) then rebooted phone i.e. "system".
4. Waited patiently as it took a few minutes to go on the main Home screen.
5. Created Google account in "Settings" then went straight to "PlayStore" to update all applications, including SuperSU.
6. Ran SuperSU and upon request, updated the binary "normally" and rebooted just fine.
NOTE: In the Wi-Fi detected lists, since my first ever boot of this phone, I get a (fake?) SSID entry "NVRAM WARNING: Err = 0x10" which is apparently easily fixed for other phones. Do you guys you also got that?
A bunch of final questions to you, @askermk2000 when you have time to reply.
1) Does the stock weather display on a Home page work for you? I only get Chinese cities, location doesn't work as it says "city not found". Manual input of e.g. Europe cities doesn't show results, either.
2) Despite removing most via "Settings -> App Manager", any suggestions oh how to remove some further chinese apps that are marked "system app"? This article suggests NoBloat Free, Titanium Backup, System App Remover and App Master. I am not familiar with this approach but for example, "LenovoStore" could be removed...
3) Do you have by any chance the original, black b/g, folding (yes, boring) Lenovo animation boot logo to share? I see there's a file logo.bin for SP Flash Tools but others talk about /system/media/bootanimation.zip file... I ask if you have it, as the "Boot Animations" PlayStore app may not have the stock Lenovo boot. Perhaps flashing it via SP Flash Tool is better?
4) Will you kindly share any updates here to TWRP versions, whenever released? Do you anticipate any update in the coming 1-2 months, for example? (not sure there are bugs in TWRP-3.0.2.3, if any)
5) If there is a newer Lenovo official ROM available (than today) we obviously lose the TWRP recovery if we flash it all via SP Flash Tools; but we keep TWRP recovery if we update to the new ROM via TWRP, correct?
Thank you.
Click to expand...
Click to collapse
About that Wi-Fi problem. No I don't have it, and I was reading that page with the fix. It seems it's caused by using wrong settings in SPFlashtool, so likely the vendor did this when applying his trash firmware.
If you wifi is not working (as some reported in that thread) I would of course try to get a refund.
Weather gadget only has Chinese cities, yes I noticed that so I was using yahoo weather instead on my phone.
I would suggest Titanium Backup, it's what I use.
No, sorry I don't have any boot logos or animations.
This phone is a bit slow on the updates. But if there's an update, you can do it through the OTA update function which only downloads the changes as a patch. Though If your phone is heavily modified it might not work correctly. Could try a factory reset first, or simply start a fresh.
Then you would probably need to download the original recovery and flash that first.
PS: You can break the system by removing too much of the lenovo stuff. Remember VibeUi is heavily integrated and impossible to remove completely. Also, for gapps go to www.opengapps.org
help
Can you help me a bit? I got an infected phone and i need to install a new rom to keep myself safe. (im kinda noob to installing stuff like these)
First bootanimation "china4Gchina", second ok and poweroff ok.
Please help to change to first animation or delete.
Thanks.

[ROM] [STOCK] [PORT] XOS Chameleon ROM for Ulefone U007 (ported from i10)

XOS Chameleon ROM​
HI GUYS
MY ALL ROM PORTED WITH NEW PORTING METHOD​
HERE MY ROM COLLECTION to U007
google drive folder
LIST:
AICP 11 ( im just ported but not tested yet)
AMIGO OS ( first boot take long time because the rom deodexing yourself [ ~15-20min]
FIRA OS
FLYME OS 6
IPHONE 7 ROM reworked
LineAge OS ( im just ported but not tested yet)
PAC-ROM (everything works)
Resurrection Remix REWORKED (FM fixed and now everything works)
Star OS
XOS v2 REWORKED with new porting method
Working:
Wi-Fi
Bluetooth
GPS
Camera
Camera FOCUS fixed
Loud speaker
Microfone
Sim card
Memcard
Etc.....
DOWNLOAD
REWORKED WITH NEW PORTING METHOD
Download
Wipe all
Flash ROM from TWRP Recovery
Reboot and Enjoy!
I waiting replies.
Flyme OS 6
download
Install TWRP
Requirements: -MTK VCOM driver ( If you dont know how install, search it in google)
How install TWRP?
1.) Download this rar https://drive.google.com/open?id=0B4vXL_-A5tC2RUw3OU0ybHZSZ3M
2.) Extract it
3.) Open SP Flashtool and open the scatter file
4.) Connect your phone to pc
5.) Press download button
6.) Turn off your device , waiting few second and turn on. ( The sp flastool start working)
Congratulation !
You successfully installed TWRP recovery for your U007.
can i change language to german/english?
i cant add my google accounts pls fix that or say how to solve the problem!
sisxgame said:
How install TWRP?
1.) Download this rar https://drive.google.com/open?id=0B4vXL_-A5tC2RUw3OU0ybHZSZ3M
2.) Extract it
3.) Open SP Flashtool and open the scatter file
4.) Connect your phone to pc
5.) Press download button
6.) Turn off your device , waiting few second and turn on. ( The sp flastool start working)
Congratulation !
You successfully installed TWRP recovery for your U007.
Click to expand...
Click to collapse
why i cannot add google accounts on this rom error by communiation with google-servers
---------- Post added at 05:54 PM ---------- Previous post was at 05:23 PM ----------
sisxgame said:
OSX Chameleon ROM​
Working:
Wi-Fi
Bluetooth
GPS
Camera
Camera FOCUS fixed
Loud speaker
Microfone
Sim card
Memcard
Etc.....
Not Working:
SystemUi Flashtorch toggle
Download
https://drive.google.com/file/d/0B4vXL_-A5tC2YmJmVW5vMEJfcDA/view
Wipe all
Flash from TWRP Recovery
Reboot Enjoy
I waiting replies.
Click to expand...
Click to collapse
nice that you said me that you have a rom but support would be very nice...
DarkXLord20 said:
why i cannot add google accounts on this rom error by communiation with google-servers
---------- Post added at 05:54 PM ---------- Previous post was at 05:23 PM ----------
nice that you said me that you have a rom but support would be very nice...
Click to expand...
Click to collapse
Hi
the googleplay working perfectly in my phone
the rom dont buggy
I think
1) wipe all in TWRP (wipe/advanced wipe and check Dalvik, system, Cache, Data )
2) Reinstall Rom
3) Int he first boot up. In xaccount settings , select the other country.
Reply if it works.
sisxgame said:
Hi
the googleplay working perfectly in my phone
the rom dont buggy
I think
1) wipe all in TWRP (wipe/advanced wipe and check Dalvik, system, Cache, Data )
2) Reinstall Rom
3) Int he first boot up. In xaccount settings , select the other country.
Reply if it works.
Click to expand...
Click to collapse
i meant google not xacc
DarkXLord20 said:
i meant google not xacc
Click to expand...
Click to collapse
yes i know but possible it is influence google account.
Just try it what i written
sisxgame said:
Hi
the googleplay working perfectly in my phone
the rom dont buggy
I think
1) wipe all in TWRP (wipe/advanced wipe and check Dalvik, system, Cache, Data )
2) Reinstall Rom
3) Int he first boot up. In xaccount settings , select the other country.
Reply if it works.
Click to expand...
Click to collapse
doesnt work for me
DarkXLord20 said:
doesnt work for me
Click to expand...
Click to collapse
Ok
i will test the download link and the rom
and maybe tomorrow this bug will fixed.
all the best bro
sisxgame said:
Ok
i will test the download link and the rom
and maybe tomorrow this bug will fixed.
all the best bro
Click to expand...
Click to collapse
i will try it tomorrow because i have no school so enough time to test it tomorrow
hello, can i easily return to the original rom ?
wojtekll said:
hello, can i easily return to the original rom ?
Click to expand...
Click to collapse
Sure.
1. method: Make TWRP backup of the stock rom. (all data and app restorable)
2.method: Use SP Flashtool and flash stock rom from pc
sisxgame said:
XOS Chameleon ROM​
Working:​Wi-Fi
Bluetooth
GPS
Camera
Camera FOCUS fixed
Loud speaker
Microfone
Sim card
Memcard
Etc.....​
Not Working:​Flashlite toggle
Download flashlite app from googleplay
(i will try fix it)​
Download
V2
https://drive.google.com/open?id=0B4vXL_-A5tC2UXd3UjNGM2MxMTg
Wipe all
Flash ROM from TWRP Recovery
Reboot and Enjoy!
I waiting replies.
Click to expand...
Click to collapse
Would this rom work with ulefone u007 pro?
androidia said:
Would this rom work with ulefone u007 pro?
Click to expand...
Click to collapse
Unfortunately no. Becouse u007 pro have diffrent chipset.
(u007=MT6580 ; u007 pro=MT6735 )
Sorry bro.
Welcome, rom works very well, I had to just turn off the screen soft keys, now it's time for more tests. I do not know it is possible to the middle button works as on the original rom, after holding the last show running programs - now opens google.
wojtekll said:
Welcome, rom works very well, I had to just turn off the screen soft keys, now it's time for more tests. I do not know it is possible to the middle button works as on the original rom, after holding the last show running programs - now opens google.
Click to expand...
Click to collapse
If you want the original keymap ,
1) replace keylayout folder (stock to port) in system/usr/
I not tested the method, but should work.
(If i will have some time i test it)
Waiting the reply.
Unfortunately, after the copying of the original rom all of the buttons stopped working : o after the restoration folder rom chameleon also nothing worked. I had to restore the rom because no buttons work even power and vol up and down. Unless I did something wrong (I was copying the program es explorer)
wojtekll said:
Unfortunately, after the copying of the original rom all of the buttons stopped working : o after the restoration folder rom chameleon also nothing worked. I had to restore the rom because no buttons work even power and vol up and down. Unless I did something wrong (I was copying the program es explorer)
Click to expand...
Click to collapse
I make a flashable zip and upload it.
Patience bro.
I wonder whether that has changed an entry in the file build.prop with "qemu.hw.mainkeys = 0" to "qemu.hw.mainkeys = 1" has not caused a problem ?

Nubia X Android 9 Beta Official Published !

At the end of the update in question was published by the official units.
Notice that the beta version is.
resource connection : https://bbs.nubia.cn/thread-1462621-1-1.html
As an informative question: If we update the rooted and installed gapps in all versions, can there be a problem?
For example, you may be deprived of gappa until you have Brick or New root?
chinese english translation is bad because i did not understand.
*Changes*
* JOS updated X-JOS
* Android 8.1 version updated Android 9.0
*System optimization : system performance, enhance the overall fluency
*optimization: system stability
*optimization: Android update security patches
*smart card services added: "fast application" card and enjoy the native application experience the performance of third-party applications
*optimization: Some third-party application stability
*fix: part of the game (the king of glory, to stimulate the battlefield) probability of the emergence of flash back problems
this update optimized content including but not limited to the above-listed items
Note precautions: ● This is a trial version upgrade, only support SD card upgrade package: After you download this version of the full SD card pack, then click on "Settings" -> "System Update" -> "button in the upper right corner function" -> "local upgrade", select SD card pack, click the "install now" wait upgrade is complete;●trial version where there may be imperfections on experience details, please according to their own circumstances choose to upgrade;●upgrade this version P Andrews after, if you want to roll back to previous versions, you need to back up phone data,Shuangqing SD card pack before upgrading history, after the completion of normal use;● Make sure the phone battery before upgrading adequate and mobile phone data backup (recommended use its own backup software), so as not to cause the phone to upgrade data loss; ●before upgrading, cancellation of various screen lock, the upgrade process, make sure the phone flat, and not arbitrarily touch the screen, follow the onscreen prompts ;● as already get Root privileges, be sure to remove the Root privileges, the state returned to normal version, and restore the factory settings before upgrading, otherwise easily lead to the escalation Defeated.
Download Link: http://romdownload.nubia.com/nubiaX/V3.05/NX616J-update.zip
Altarnatife Download Link : https://drive.google.com/file/d/1AqeiP-uQYI5jq7m1SabJ51h1MFn31pkn/edit
Thanks : @Ravira43
MD5 code: 66DD854D61C742326C01200E580E2952
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Ravira43 said:
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Click to expand...
Click to collapse
Hi. I need to ask. What does this mean? Does this include Play Store? Is it a global version?
Or is it just another Chinese ROM?
Thank you!
Ravira43 said:
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Click to expand...
Click to collapse
Used " internet download menager " and search google " idm 16 part download" use.
gigilex said:
Hi. I need to ask. What does this mean? Does this include Play Store? Is it a global version?
Or is it just another Chinese ROM?
Thank you!
Click to expand...
Click to collapse
No, only Chinese ROM. unlucky.
But İnstall new Play store way
1. https://bbs.nubia.cn/thread-1464227-1-1.html
2. https://bbs.nubia.cn/thread-1462852-1-1.html
Never mind, a friend of mine has already downloaded and uploaded it on google.
Can't paste the link, because I'm a new member.
Ravira43 said:
Never mind, a friend of mine has already downloaded and uploaded it on google.
Can't paste the link, because I'm a new member.
Click to expand...
Click to collapse
I'm glad you got the solution.
I can publish the link if you throw it.
Guys I have just received an OTA update 1.4gb version 3.05 on my phone.
I would install it but my fear is to loose all data and settings.
Did anyone installed it?
I've also received the OTA update, I would try it but the chinese links for Gapps are nor working (source download not posssible)
Does anyone know how to unroot the terminal?
When local updating to 3.05, the terminal will brick.
How to install Android 9
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Ravira43 said:
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Click to expand...
Click to collapse
hi i run android 9 on my nubia x rooted, but how can we get Gapps working on it please ? thanks
I have twrp running on it too.
Ravira43 said:
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Click to expand...
Click to collapse
it's ok everything work fine, Nubia x android 9 with all google services OK exept voice match ( OK google from screen).
elnas1369 said:
it's ok everything work fine, Nubia x android 9 with all google services OK exept voice match ( OK google from screen).
Click to expand...
Click to collapse
Yeah I'm also looking for a solution how to remove this ****ty nubia voice and replace it with google.
Yeah it could be nice to replace it with Google assistant
I would install Android 9 but my fear is to loose all configurations, permissions, etc and It will take long time to reconfigure every thing.
My question is : is it really worth to install it or there are more or less the same performance?
Anyone knows if nubia X will have final android 9?
Guys!! I know this sounds stupid but I have no "update" option in my settings!! Please help if you know what is going on with my new Nubia X!
Shahin13 said:
Guys!! I know this sounds stupid but I have no "update" option in my settings!! Please help if you know what is going on with my new Nubia X!
Click to expand...
Click to collapse
Download the rom for Android 9, got to settings -> "System update", then from the menu up, select "Local update".
No issues with 3.05 - works fine, nothings from the apps, data or setting is flushed. But the phone is unrooted and you need to process it again.
But recently I have updated it from 3.03 to 3.11 and I can't find the root tool.
Anyone has idea where to find it?
Thanks.
3.11 play store
Looking allsou the rooting tool for 3.11. Needed play store.

Categories

Resources