Alright so let me start off by saying that I have never had so much hell rooting and putting a custom Rom onto a phone. I am also a bit disappointed in xda as non of the articles were of much help, they were all broken up and I ran into trouble at literally every step. The easiest part was rooting the phone with ioroot, but finding it actually wasn't that easy because most of the tutorials I found from the start kept having me use other methods and none of them worked.
Second once I performed this step and had everything installed I realized that in order to use my wifi hotspot, I was going to need a custom rom. this was of course after trying dozens of worthless hotspot apps in the store, none of which worked. So I started trying to put a custom recovery on the phone, this was by far the hardest part, I tried and scoured the internet for 3 days, I swear to god I read every article and tried every method out there....the new ATT LG G2's however have a lock on the recovery to prevent people from doing this, I found it strange that none of these articles written based on 4.4.2 thought to mention that an exploit has not yet been found. Finally I ran across an article where I learned of this and was told to downgrade, so I downloaded SuperSport & big fau LG G2 D800 Flash stock. Thinking that this rom was going to unlock the recovery because it said it would, I ran through the process.
This however, was not the case and it didn't help, the whole time I was convinced that this had unlocked my recovery, I continued to try every tutorial on installing a recovery onto this device, the AT&T LG G2 kitkat 4.4.2 (D80020c), which btw is a week old from the date of this post. I like a lot of other people, will have this phone and be looking to unlock, root, install custom recovery, and install custom rom. For this I would like to figure out a few things and hopefully if y'all help me figure this out, I can include fixes for it in the next article that I write, which will explain how I successfully put a custom rom on my AT&T from start to finish. I will also include in this article what could go wrong and how to fix it, too many articles are written without taking into consideration the possibilities of what could go wrong.
It took me three solid days of scouring the internet to get a custom Rom on my phone, running through problems at every step I still have a few questions. After downgrading from 4.4.2 to 4.2.2 my recovery was broke, thankfully I was able to fix this using flashify in the app store. I then installed Cyanogen Mod 10 (cm-10.2.0-d802.zip). and installed it through recovery, when I rebooted I was presented with a fastboot which would do crap when I would plug the usb into my computer...I never figured out what the problem was for this, but I ended up trying a version of CM 10 which was released for the LG G2 D80010d that I downgraded too, the tethering doesn't work...no big deal, but the problem is when I set WiFi hotspot up and connect, on my computer I get SSL error's, my computer completely refuses to let my connect to facebook or google, saying that the connection is insecure, it won't let me grab any kind of certificate and I can't find a solution online. I have tried rebooting both the computer and phone, I don't get these errors on the WiFi at the gas station.
In the above paragraph, I stated the two problems I couldn't really figure out, I haven't tried to install any other custom roms, but I will try that today, I have to save my bandwidth on my phone so I will walk down to the truck stop and download one, ps I had to flash my phone back to stock about 5 times before I finally figured out I needed to downgrade it, then I had to do it 2 more times.
If y'all take the time to read this and help me, then I will take the time to write a new and working article describing how to do it from start to finish and it will be written with explicit detail on every problem I came across and how I fixed it.
Figured out how to mix the firmware
Alright, so I was reading through a few more articles and I ran across this link, which will allow you to upgrade back to D80020c, but without loosing the stock recovery. I'm going to have to wait till later today to give it a try though, because the internet at the truck stop is to slow to download something of that size.
J0hnC0nn3r said:
Alright so let me start off by saying that I have never had so much hell rooting and putting a custom Rom onto a phone. I am also a bit disappointed in xda as non of the articles were of much help, they were all broken up and I ran into trouble at literally every step. The easiest part was rooting the phone with ioroot, but finding it actually wasn't that easy because most of the tutorials I found from the start kept having me use other methods and none of them worked.
Second once I performed this step and had everything installed I realized that in order to use my wifi hotspot, I was going to need a custom rom. this was of course after trying dozens of worthless hotspot apps in the store, none of which worked. So I started trying to put a custom recovery on the phone, this was by far the hardest part, I tried and scoured the internet for 3 days, I swear to god I read every article and tried every method out there....the new ATT LG G2's however have a lock on the recovery to prevent people from doing this, I found it strange that none of these articles written based on 4.4.2 thought to mention that an exploit has not yet been found. Finally I ran across an article where I learned of this and was told to downgrade, so I downloaded SuperSport & big fau LG G2 D800 Flash stock. Thinking that this rom was going to unlock the recovery because it said it would, I ran through the process.
This however, was not the case and it didn't help, the whole time I was convinced that this had unlocked my recovery, I continued to try every tutorial on installing a recovery onto this device, the AT&T LG G2 kitkat 4.4.2 (D80020c), which btw is a week old from the date of this post. I like a lot of other people, will have this phone and be looking to unlock, root, install custom recovery, and install custom rom. For this I would like to figure out a few things and hopefully if y'all help me figure this out, I can include fixes for it in the next article that I write, which will explain how I successfully put a custom rom on my AT&T from start to finish. I will also include in this article what could go wrong and how to fix it, too many articles are written without taking into consideration the possibilities of what could go wrong.
It took me three solid days of scouring the internet to get a custom Rom on my phone, running through problems at every step I still have a few questions. After downgrading from 4.4.2 to 4.2.2 my recovery was broke, thankfully I was able to fix this using flashify in the app store. I then installed Cyanogen Mod 10 (cm-10.2.0-d802.zip). and installed it through recovery, when I rebooted I was presented with a fastboot which would do crap when I would plug the usb into my computer...I never figured out what the problem was for this, but I ended up trying a version of CM 10 which was released for the LG G2 D80010d that I downgraded too, the tethering doesn't work...no big deal, but the problem is when I set WiFi hotspot up and connect, on my computer I get SSL error's, my computer completely refuses to let my connect to facebook or google, saying that the connection is insecure, it won't let me grab any kind of certificate and I can't find a solution online. I have tried rebooting both the computer and phone, I don't get these errors on the WiFi at the gas station.
In the above paragraph, I stated the two problems I couldn't really figure out, I haven't tried to install any other custom roms, but I will try that today, I have to save my bandwidth on my phone so I will walk down to the truck stop and download one, ps I had to flash my phone back to stock about 5 times before I finally figured out I needed to downgrade it, then I had to do it 2 more times.
If y'all take the time to read this and help me, then I will take the time to write a new and working article describing how to do it from start to finish and it will be written with explicit detail on every problem I came across and how I fixed it.
Click to expand...
Click to collapse
J0hnC0nn3r said:
Alright, so I was reading through a few more articles and I ran across this link, which will allow you to upgrade back to D80020c, but without loosing the stock recovery. I'm going to have to wait till later today to give it a try though, because the internet at the truck stop is to slow to download something of that size.
Click to expand...
Click to collapse
well first I want to clarify you on that week old part especially since we have had kitkat on d800 since about feb 27 in fact if you look at garys thread about kk with custom recovery which is originally from march 6(on 5th we figured out what needed to be done but on 6th they began rolling out) and also if you would have asked for assistance I could have helped to find all needed info on rooting and everything (I just don't spend a lot of time in the dedicated d800 thread) anyways as for 20c I've been on it since root was available(also on first day of release of 20c) and have been running garys rom since it was released and I love it but if you want tethering(I know a way to enable you just need a paid app) and there are already threads on doing things from start to finish http://forum.xda-developers.com/showthread.php?t=2633150
Thanks
XxZombiePikachu said:
well first I want to clarify you on that week old part especially since we have had kitkat on d800 since about feb 27 in fact if you look at garys thread about kk with custom recovery which is originally from march 6(on 5th we figured out what needed to be done but on 6th they began rolling out) and also if you would have asked for assistance I could have helped to find all needed info on rooting and everything (I just don't spend a lot of time in the dedicated d800 thread) anyways as for 20c I've been on it since root was available(also on first day of release of 20c) and have been running garys rom since it was released and I love it but if you want tethering(I know a way to enable you just need a paid app) and there are already threads on doing things from start to finish http://forum.xda-developers.com/showthread.php?t=2633150
Click to expand...
Click to collapse
Sorry, I didn't mean to sound like a ****. I just had a really hard time finding a complete walkthrough on this, I ended up taking bits and pieces from different tutorials and it seemed that most of them only covered one aspect of the process, like recovery, or if they covered the whole walkthrough they would either leave something out or I would recieve errors, such as the loki error, and the original adb not detecting my device. I had to download an adb from an alternative source because the official adb wouldn't detect my device, after trying everything but it didn't bother me because I figured it out and thanks for your response, really appreciated, I will check that out....How many mods have you tried and what features do you like about them? I liked the ideal of the CM 11 for the 4.4.2 because it boasted the porting of pretty much every feature that comes on the LG G2 4.4.2...Like the double tap to unlock and such....I will check out Gary's mod and see what it offers, thanks again
I would just like to start out by saying congrats on getting your device to where you've wanted it - I do agree that the G2 is a special case right now considering the lack of development and spotty information available for development.
With that being said...
There is a really good reason why the site was named XDA-"Developers" and not XDA-"Newbs". The primary focus of these forums is for the purpose of developers engaging one another and sharing their discoveries with the community. There are some really great developers here that take a LOT of their own PERSONAL time to create the stunning softwares, hacks, themes, etc. that often ultimately get freely distributed to the public. Take note that 99% of these threads start off with "Use my software and instructions with NO expectation of support or warranty" or "Flash at your own risk".
These folks give so much to the community and often ask for little or nothing in return. While the information right now is pretty sparse and scattered, do you think you could have achieved what you did without it? The mere fact that you have a custom ROM, root and recovery is a testament to the hard work of the folks here who are giving their own time up in the name of furthering development. Our G2s, while stellar devices, are the outliers in the world right now because they are not in the hands of the masses. How many people have looked at you and asked "is that the new Galaxy??" I believe in time, someone with way more time and Android know-how than I, will deliver something mind-blowing to the XDA community for this device. Just be patient and realize that the majority of Smartphone users right now have a GNote, S4, or HTC something-or-another.
Finally, re-read your post and try to hear the tone you delivered. You sound upset that the XDA community hasn't delivered you an easy root/recovery package on a silver platter with all the trimmings. Again - this forum is for developers. What they choose to share with the rest of us as non-developers is totally up to them. They also tend to share more when the support they receive is positive. Long rants about your disappointment in the community over how you had a hard time getting what you wanted on your device - well you catch more flies with honey...
Cliffs notes? Hug a developer, and say thank you for what you've managed to accomplish with your device. Without the info posted around here, we'd all be living with stock ROMs and unrooted, bland G2s. If you are unhappy with your own personal experiences with getting to where you are right now... Well, you obviously know where the "new post" button is. Become a contributor, tell us how YOU did it and give back to the community. If you only rant about your disappointments, then you aren't really making anything better for anyone around here - in fact it only serves to clutter up an already fragmented knowledge base.
From one long winded poster to another - good luck in your ventures with the G2. It has served me well so far and I believe it will continue to do so for quite a while.
Regards.
Sent from my LG-D800 using Tapatalk
tethering
If tethering is all you wanted. I would have done it the easy way. You can unlock WiFi tether by trying to turn it on, then when it fails use sqlite editor from the market to go in and change the provisioning status to 0 in the database file. Sqlite costs 2 bucks, it would be worth that to not have to go through all that. I never thought I would own a phone without a custom Rom, but so far I'm still stock on the lg g2 it's that good. Most annoyances can be fixed as long you have root.
Krayziepop said:
I would just like to start out by saying congrats on getting your device to where you've wanted it - I do agree that the G2 is a special case right now considering the lack of development and spotty information available for development.
With that being said...
There is a really good reason why the site was named XDA-"Developers" and not XDA-"Newbs". The primary focus of these forums is for the purpose of developers engaging one another and sharing their discoveries with the community. There are some really great developers here that take a LOT of their own PERSONAL time to create the stunning softwares, hacks, themes, etc. that often ultimately get freely distributed to the public. Take note that 99% of these threads start off with "Use my software and instructions with NO expectation of support or warranty" or "Flash at your own risk".
These folks give so much to the community and often ask for little or nothing in return. While the information right now is pretty sparse and scattered, do you think you could have achieved what you did without it? The mere fact that you have a custom ROM, root and recovery is a testament to the hard work of the folks here who are giving their own time up in the name of furthering development. Our G2s, while stellar devices, are the outliers in the world right now because they are not in the hands of the masses. How many people have looked at you and asked "is that the new Galaxy??" I believe in time, someone with way more time and Android know-how than I, will deliver something mind-blowing to the XDA community for this device. Just be patient and realize that the majority of Smartphone users right now have a GNote, S4, or HTC something-or-another.
Finally, re-read your post and try to hear the tone you delivered. You sound upset that the XDA community hasn't delivered you an easy root/recovery package on a silver platter with all the trimmings. Again - this forum is for developers. What they choose to share with the rest of us as non-developers is totally up to them. They also tend to share more when the support they receive is positive. Long rants about your disappointment in the community over how you had a hard time getting what you wanted on your device - well you catch more flies with honey...
Cliffs notes? Hug a developer, and say thank you for what you've managed to accomplish with your device. Without the info posted around here, we'd all be living with stock ROMs and unrooted, bland G2s. If you are unhappy with your own personal experiences with getting to where you are right now... Well, you obviously know where the "new post" button is. Become a contributor, tell us how YOU did it and give back to the community. If you only rant about your disappointments, then you aren't really making anything better for anyone around here - in fact it only serves to clutter up an already fragmented knowledge base.
From one long winded poster to another - good luck in your ventures with the G2. It has served me well so far and I believe it will continue to do so for quite a while.
Regards.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Nothing new to add to this but I've never had so much fun reading through a response that utterly fleeced another person for going full on ungrateful douche. Kudos sir. Lol
Sent from my LG-D800 using XDA Premium 4 mobile app
For me this was the easiest phone to root and flash recovery. Used ioroot for root and freegee to install custom recovery. That's when I was using jelly bean now I'm on stock kit Kat
Sent from my LG-D800 using xda app-developers app
Related
First things first, I've been in the wireless industry since 2002, but I've never attempted a phone hack in my life. I'm a complete noob when it comes to Linux, and the furthest I've gotten with phone customization is some stock BB theme for my 8130.
I needed a new handset, and since I'm in the industry anyway, I decided I needed to keep current on Andriod, since I had a feeling it was going to be huge. So I trekked on down to my local T-mo store and picked up the white model.
Last night, I decided to see if I could get the g1 to tether one of our test laptops. While I wasn't exactly successful, the threads that lead me here (and to other areas) made me aware of just what this phone was capable once you re-attached it's gonads.
Long story short, in a few "short" hours, I'd downgraded to rc29, rooted my device, reflashed to RC30, and am a happy camper. The results are in my sig.
If you're overwhelmed by the mass of information regarding these processes: don't be. Just keep reading this forum, the instructions are clear but to a neophyte like myself (and you) it'll be confusing.
Keep trying, you won't be disappointed.
Regards,
Toes
Congrats!
Make sure you read up on moving over the caches and how to install apps to the sd card. It's all well worth the effort and rewarding in the end.
mark925 said:
Congrats!
Make sure you read up on moving over the caches and how to install apps to the sd card. It's all well worth the effort and rewarding in the end.
Click to expand...
Click to collapse
Already on it, I'm just to busy to do much of it at work.
ninetoes said:
First things first, I've been in the wireless industry since 2002, but I've never attempted a phone hack in my life. I'm a complete noob when it comes to Linux, and the furthest I've gotten with phone customization is some stock BB theme for my 8130.
I needed a new handset, and since I'm in the industry anyway, I decided I needed to keep current on Andriod, since I had a feeling it was going to be huge. So I trekked on down to my local T-mo store and picked up the white model.
Last night, I decided to see if I could get the g1 to tether one of our test laptops. While I wasn't exactly successful, the threads that lead me here (and to other areas) made me aware of just what this phone was capable once you re-attached it's gonads.
Long story short, in a few "short" hours, I'd downgraded to rc29, rooted my device, reflashed to RC30, and am a happy camper. The results are in my sig.
If you're overwhelmed by the mass of information regarding these processes: don't be. Just keep reading this forum, the instructions are clear but to a neophyte like myself (and you) it'll be confusing.
Keep trying, you won't be disappointed.
Regards,
Toes
Click to expand...
Click to collapse
Congrats.
I was in the same boat as you when I got my first smart phone, TMo Wing (Herald). It was daunting when I first started reading here and you're literally blasted in the face with loads of information but with patience and lots of reading it became clear.
Yeah i second that the people here are great, they make the most complex hacks doable by ordinary people. I believe that no one should have a non-rooted G1.
dont forget to check out the new RC30 v1.41 from JF that includes Multi Touch and some other goodies.
I agree. I'm not a complete noobie, but I'm far from experienced in this kind of thing. Multitouch is really cool!
The only problem I'm having is that when I downgraded to RC29, I lost my Wifi connections. I enable Wifi, and I don't get the Wifi symbol any more. It sees my wifi, but when I type my password in correctly, it says it can't connect. My connection has always worked flawlessly before. It really stinks, because cellphone signals are really bad here, and I can't even browse the market anymore.
edit: Boy, am I dumb, I forgot I changed my router password. Duhhh!!! Wifi connects now!
Haha yea I agree its kind of overwhelming when you start reading these forums. I rooted my G1 a little over 24 hours ago and was kind of nervous thru the entire process and i'm a unix / linux administrator. I really haven't had much experience working with Linux on embedded devices.
I haven't bothered much with the themes yet. I'm planning on rolling my own android image or keeping it up to date with the dev branch.
The sky is the limit =)
First timer here as well. Took me a little under 1hr. The longest part was formatting my 8gb sdhc card.
Love the multi touch and task manager so far. Can't wait to hack some more stuff.
Glad to hear stories similar to mine. I posted this in the hopes that other newbies like myself would read it and take heart. You seriously do NOT want to be using this device with the stock T-mo rom.
ninetoes said:
Glad to hear stories similar to mine. I posted this in the hopes that other newbies like myself would read it and take heart. You seriously do NOT want to be using this device with the stock T-mo rom.
Click to expand...
Click to collapse
A co-worker of mine that works in another department got a G1 as well. I almost feel sorry for him since I know he's gotta be running the stock RC30 since I know he's not tech savvy at all.
I am having all kinds of trouble getting mine hacked. I got down to rc29 fine and than I have got the update for rc30 jf 1.3.1 rom saved on my sd card but i cannot get it to update on my phone. I reboot by holding home and power and than I hit alt+L Alt+S and it won't update
subie08 said:
I am having all kinds of trouble getting mine hacked. I got down to rc29 fine and than I have got the update for rc30 jf 1.3.1 rom saved on my sd card but i cannot get it to update on my phone. I reboot by holding home and power and than I hit alt+L Alt+S and it won't update
Click to expand...
Click to collapse
Wait a hot minute. You want to go to Dream Development Thread and download the Jf update ver 1.41. You then save it on sd card but rename the entire zip file to update.
P.S. Make sure you have Jf's recovery image and if this just sounds like crazy talk then look at this post http://forum.xda-developers.com/showthread.php?t=442480
hbguy
Hi all,
I've just got an T-Mobile G1 and I would like to turn it to the Dev version with the modified RC30.
After going around these informative threads, I'm getting confused now
I would like to have a rooted G1 with HardSPL and JF v1.41 image. Are those steps correct to obtain such aim?
1. Downgrading to RC29 and rooting my device
2. Installing HardSPL (file for RC30). Now, is my G1 considered ADP1.1? Can I install any image without losing the root?
3. Reflashing to JF 1.41. Which image should I use now (ADP1.1 or RC30)?
It's kinda new thing for me but this thread of ninetoes did give me some encouragement. I'm eager to try it. Please kindly give me some advises
So anyone gives me an advice please!
mark925 said:
A co-worker of mine that works in another department got a G1 as well. I almost feel sorry for him since I know he's gotta be running the stock RC30 since I know he's not tech savvy at all.
Click to expand...
Click to collapse
than help spread the love
Hey all,
I'm getting my G Tablet tomorrow and I'd just like to get some things clarified.
I know, the first thing some will say is USE SEARCH! Well, I did - and that's actually why I just want to get some things straight before I go down the path of modifying the device software. See, reading it all has managed to confuse me more than help me get a definitive instruction set for forging ahead.
I'm seeing the update "****s on CWM" according to a user...and then a 'fix' for that. Than I see that Gapps causes FCs for some, while it works for others. So...yeah, a little back and forth on what to do and who's instructions to follow.
Alright, so first thing's first....Should I flash the Clockwork Mod that I'm seeing available - 0.8? or is there something else I should consider or that I've missed? or maybe wait for a newer version? Should I even flash CWM if I get the newest (and I WILL be getting the newest) S/W version? Are there any downsides at all to flashing CWM on there in terms of messing with OTA updates, etc?
I read this:
"All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:...."
Sooo, does that mean I can live without CWM? If an update doesn't work for some reason, will I be able to fix it or overwrite it somehow if I can't get into the tablet at all from the tablet itself? I read something about going into APX mode and putting things on through Windows, is this an infallible method?
Second of all, I read the FAQ thoroughly (I think and hope) but I'm still not 100% on what Gapps to DL or how to put a working Android Market on there especially with this new S/W update. I've seen how to 'fix' the Market to see missing apps, but not how to actually install it on the G Tablet. I may have missed that post somewhere on here.
I'm also unclear if I should get Gapps or not at all, as I've read that some have FCs on there while others do not - so what's the general consensus in light of this update that was just released as of Dec. 21, 2010?
Ultimately, here is what I'd like from my GTab:
I'd like to run the new official Tapn'Tap released recently first and foremost.
I'd like to have the official/unofficial (w/e) Google Market.
I'd like to run Google Apps (Gtalk, Gmail, etc.).
IF I don't like Tapn'Tap, and this is a worse case scenario situation, as in if I HATE TnT - I'd like to have the option to slap something else on there and I'd like to make sure I don't brick my Tablet. Whether that means storing an original official TnT ROM or whatever.
Point me in the right direction please, especially considering things may have changed as of the new S/W update.
Thanks much and sorry for all the questions. I assure you I used search and I attempted to put it together on my own. It's been a long time since I've modded (G1 was the last time) and I don't do it often. Also, apologies if I posted this in the wrong section....I considered posting it in Dev. section but this one seemed better suited.
Thanks again, XDA rocks.
Neoprimal said:
Hey all,
I'm getting my G Tablet tomorrow and I'd just like to get some things clarified.
I know, the first thing some will say is USE SEARCH! Well, I did - and that's actually why I just want to get some things straight before I go down the path of modifying the device software. See, reading it all has managed to confuse me more than help me get a definitive instruction set for forging ahead.
I'm seeing the update "****s on CWM" according to a user...and then a 'fix' for that. Than I see that Gapps causes FCs for some, while it works for others. So...yeah, a little back and forth on what to do and who's instructions to follow.
Alright, so first thing's first....Should I flash the Clockwork Mod that I'm seeing available - 0.8? or is there something else I should consider or that I've missed? or maybe wait for a newer version? Should I even flash CWM if I get the newest (and I WILL be getting the newest) S/W version? Are there any downsides at all to flashing CWM on there in terms of messing with OTA updates, etc?
I read this:
"All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:...."
Sooo, does that mean I can live without CWM? If an update doesn't work for some reason, will I be able to fix it or overwrite it somehow if I can't get into the tablet at all from the tablet itself? I read something about going into APX mode and putting things on through Windows, is this an infallible method?
Second of all, I read the FAQ thoroughly (I think and hope) but I'm still not 100% on what Gapps to DL or how to put a working Android Market on there especially with this new S/W update. I've seen how to 'fix' the Market to see missing apps, but not how to actually install it on the G Tablet. I may have missed that post somewhere on here.
I'm also unclear if I should get Gapps or not at all, as I've read that some have FCs on there while others do not - so what's the general consensus in light of this update that was just released as of Dec. 21, 2010?
Ultimately, here is what I'd like from my GTab:
I'd like to run the new official Tapn'Tap released recently first and foremost.
I'd like to have the official/unofficial (w/e) Google Market.
I'd like to run Google Apps (Gtalk, Gmail, etc.).
IF I don't like Tapn'Tap, and this is a worse case scenario situation, as in if I HATE TnT - I'd like to have the option to slap something else on there and I'd like to make sure I don't brick my Tablet. Whether that means storing an original official TnT ROM or whatever.
Point me in the right direction please, especially considering things may have changed as of the new S/W update.
Thanks much and sorry for all the questions. I assure you I used search and I attempted to put it together on my own. It's been a long time since I've modded (G1 was the last time) and I don't do it often. Also, apologies if I posted this in the wrong section....I considered posting it in Dev. section but this one seemed better suited.
Thanks again, XDA rocks.
Click to expand...
Click to collapse
I don't know how much direction pointing I can do but here goes..
Clockwork mod in my opinion is a necessity. Version 0.8 is the best one for most people because of how it deals with the memory locations. Yes, you can do things without it. The update process is as simple as putting an update.zip file, and a recovery folder with a command file in it on an sdcard and holding the vol + button while hitting power. It is easy. Clockwork has a lot of little features though that make life easier. You can make a complete system backup with it. You can install updates, and new firmware with it. You can completely lock up your tablet and using clockwork and your backup be back in business in about 3-4 minutes. You can load new roms and if you hate them you can go back to your old working stuff in minutes. Yes, there are ways to make one of these tablets work again when they get stuck. I don't think anyone has actually bricked one. Some may think they have, but I doubt it.
Unless you are dead set on wanting the stock TnT interface the easiest way to get what you want is to load one of the roms. Yes, there are ways to get most of it without loading a new rom. Most everyone that has gone the I have to stay stock but want all the mods has eventually just loaded a rom. TnT3.0 is based on the latest stock stuff. It has the market, flash, etc. already in it. VegaN is what I use mostly but they are both stable and fast.
Before you flash something brand new that just came out I would read about it and see what others have to say about issues. It usually only takes about 30 minutes until you can tell if it is going to be good or not.
All of the roms for this tablet have there own little quirks. The stock has gotten better with each update but it still is not as good as the ones I named.
Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard.
With a little bit of searching almost everything you may want it to do can be done. I really love mine, and when I got it almost 2 months ago I hated it...
"Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard."
"Sigh" of relief. Then I'm not too worried. As I said I've dabbled in modifying my G1 and it is mostly cake. But I've just been seeing conflicting posts on whether cwm works with the newest official tnt release or not so I wasn't sure what to do.
Thanks for your advice. And when I said pointers, I meant like this as well as pointing me to any posts I may have missed on how to do whatever. Though I THINK I found most of them.
Neoprimal said:
"Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard."
"Sigh" of relief. Then I'm not too worried. As I said I've dabbled in modifying my G1 and it is mostly cake. But I've just been seeing conflicting posts on whether cwm works with the newest official tnt release or not so I wasn't sure what to do.
Thanks for your advice. And when I said pointers, I meant like this as well as pointing me to any posts I may have missed on how to do whatever. Though I THINK I found most of them.
Click to expand...
Click to collapse
The new release overwrites clockwork. But it is not hard to put back. Always a good idea to copy the clockwork backups folder to your pc, or somewhere they won't be lost. The custom roms typically leave the recovery image alone and can be installed with or without clockwork by either extracting the zip contents for stock recovery, or installing it as is in clockwork.
Sprdtyf350 said:
Finally.. This tablet is very easy to play with. It is pretty much unbrickable.
Click to expand...
Click to collapse
I can vouch for that. Erased system, boot, data and cache in preparation for a new ROM. Accidentally rebooted and couldn't get into recovery. Booted it into APX mode, flashed stock and was on my way.
I would just run ZRoot, then upload the TnTLite 3.0 recovery and update.zip and then do the recovery mode process. You should have a microsd handy just in case it doesn't work, but so far I haven't needed that.
This tablet is much easier to work with and very forgiving since VS never took the time to lock down the bootloader etc like Motorola did with my Droid X. You really shouldn't fear changing files out etc, provided you're getting a ROM from one of the people providing them here. If you can press and hold two buttons at once, you can make your gTab an awesome little tablet. It benchmarks about 1000 points higher than my Droid X on quadrant. Can't wait to see what these guys can do with Gingerbread.
Sprdtyf350 said:
The new release overwrites clockwork. But it is not hard to put back. Always a good idea to copy the clockwork backups folder to your pc, or somewhere they won't be lost. The custom roms typically leave the recovery image alone and can be installed with or without clockwork by either extracting the zip contents for stock recovery, or installing it as is in clockwork.
Click to expand...
Click to collapse
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
hogasswild said:
I would just run ZRoot, then upload the TnTLite 3.0 recovery and update.zip and then do the recovery mode process. You should have a microsd handy just in case it doesn't work, but so far I haven't needed that.
This tablet is much easier to work with and very forgiving since VS never took the time to lock down the bootloader etc like Motorola did with my Droid X. You really shouldn't fear changing files out etc, provided you're getting a ROM from one of the people providing them here. If you can press and hold two buttons at once, you can make your gTab an awesome little tablet. It benchmarks about 1000 points higher than my Droid X on quadrant. Can't wait to see what these guys can do with Gingerbread.
Click to expand...
Click to collapse
with the new update however does the z4root still work? i heard it may not anymore. just curious also since im hopefully getting mine on sat for xmas
rothnic said:
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
Click to expand...
Click to collapse
Thanks for the info Rothnic! I had already flashed it before I figured out it removed Clockwork. Learning new stuff every day is good... Thanks..
dragonfly1113 said:
with the new update however does the z4root still work? i heard it may not anymore. just curious also since im hopefully getting mine on sat for xmas
Click to expand...
Click to collapse
The very first time I rooted, I used ZRoot and installed 2.4.0. I didn't change anything and used the exact same process of simply copying over the 3.0.0 files over to the root directory of the internal memory and did the recovery procedure (vol+ and pwr keys). It worked like a charm.
hogasswild said:
The very first time I rooted, I used ZRoot and installed 2.4.0. I didn't change anything and used the exact same process of simply copying over the 3.0.0 files over to the root directory of the internal memory and did the recovery procedure (vol+ and pwr keys). It worked like a charm.
Click to expand...
Click to collapse
Ok cool, thanks cant wait for my g tablet hopefully sat morning
I think you'll like it a lot. I also own an iPad. While they are similar they are also a little different. Merry Christmas!
hogasswild said:
I think you'll like it a lot. I also own an iPad. While they are similar they are also a little different. Merry Christmas!
Click to expand...
Click to collapse
my mom has an ipad and my dad could only buy it while i was on my honeymoon bc he knew i wouldnt approve of an apple device in the house haha.
rothnic said:
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
Click to expand...
Click to collapse
My device hasn't come yet (damn you FedEx!) but I'm eagerly awaiting it.
My plan:
Unbox, start it....do a factory reset from the getgo if it has enough juice.
Set it back up. Charge it to full. If whatever comes on it is as unbearable as I've seen in on Youtube - start modifications.
Will CWM install on it AFTER I do the update if it's available to me? I've seen that the update messes with it if it's already there - but noone's mentioned putting it on there after the fact. I may just go that route for simplicity sake.
Thanks for this!, and thank you all for chiming in with your experience. I feel much better about just getting my hands dirty in it all. I had wrote something to someone yesterday about jumping in and just doing it, but when it comes to dealing with it yourself it can be a daunting task - especially when it still has that new smell, lol. Anyway, thanks again. You guys really rock.
Will stop back later on after I've done my thing
I think they are both nice devices. There are trade off for both of them. I think the screen on the iPad is wonderful, where the gTab's is okay. But the gTab has a forward facing camera, you can print from it, and you can modify it fairly easily too.
Sprdtyf350 said:
Finally.. This tablet is very easy to play with. It is pretty much unbrickable.
Click to expand...
Click to collapse
...famous last words...
Seriously though...trust the directions from the great devs like roebeet. Follow their instructions word for word. You can switch ROMs and then flash back if you want. No worries...
Off topic!
Well...disappointment! Fedex had my package out for delivery at 8am and at 8pm, they're not here. This is why I like UPS, they show up at my door on the day of delivery, no exceptions - they have shown up at almost 9pm before. The Archos 101 I got was sent out at 8am as well but got here at 1:30pm - I suppose that was before the holiday rush.
Checking the details of my tracking I'm seeing a "delivery exception" at 7:30pm (I guess it was time to get back to the facility so they can clock out by 8pm?) and upon calling them I get a somewhat stumbling but polite CS who tells me the delivery went out "late" - upon which I asked if 8am was considered late, especially from a distribution facility WITHIN the same zip code as I am, and all he could say was "Very sorry about this".
Aaaanyway....I guess it will be tomorrow before I can report my adventures.
Think I'll be able to get my $3.99 back from Amazon? I have Prime and with that the package would have come tomorrow anyway. Basically my $3.99 is wasted. Imagine if I didn't have Prime though? Whew.
ima_UNC_fan said:
...famous last words...
Click to expand...
Click to collapse
If you can figure out how to brick it you will probably get an award.. It won't be a good award but probably one of those top ten dumb things people do awards. So far unless you plug the motherboard into a wall socket no one has bricked one. May think they have, but like I said before I doubt it..
And your right.. If it can be done, someone eventually will figure out how. And then we will all laugh at them.. At least I will
I finally got the G tablet tonight and...alright, don't flame me for this - but I don't see what all the complaints about the screen being horrendous or the device being molasses slow are about?
I don't know how people are trying to view it...but when looking at it or setting it on a stand to watch media, I'm not seeing any problem with the viewing angles. It's about the same as my laptop so I watch it the same way.
It's not even a 1/4 as slow as the stuff I've seen on Youtube or in some of the review videos I've seen around the net. I haven't gotten a single FC. Granted, I haven't put in a SD Card yet so maybe problems will start then?
I guess I should note, the very first thing I did was did a factory reset. Then I hooked it up to Wifi and got the 3053 update. I'm one of those who will be waiting for the 'official' update on the 24th.
I set up the time and date, restarted and everything works. I haven't installed flash yet (don't need it that much) and stuff that I DO want on there right now works fine (skype, pandora, fring, dropbox, evernote). I'm slowly figuring out a list of what I want/need from my Mytouch 4G to port to the VS GTab. Figure I don't really NEED Gtalk, Gmail on there because I have these on my phone AND PC - do I really want them making noises all around my home on 3 devices? I was concerned about getting the Google Apps on but now I'm finding I really don't need them. So it seems to me this will be a matter of learning to separate what I need on a tablet vs. my phone - I was of the mentality that I should just get whatever's on my phone on the tablet, this is something others apparently do as they seem to want everything that's on their phone, on their tablets as well.
I personally don't see the point in that. Had I had the Google Market, that would have escaped me as I'd have used Appbrain to just get my motherload of apps from the MT4G to the GTab. Not having it has slowed me, and now I get to re-evaluate before I do grab apps for it.
Now I just have to merge/convert my HTPC into a NAS device as well and find an app that will allow me to DLNA stream media from it and I'll be in mobile heaven.
I haven't had my wifi drop at all anywhere in my home and I've marched all over with it (I use full Wifi N, no G compat. so maybe my range is wider?). Tried email, etc. to replicate crashes and force closes but haven't so far. No surfing issues. I DID find that one app got 'stuck' being downloaded and I had to delete the file before the 'downloading' icon would go away, even after restart.
Maybe the trick to getting a workable GTab in the first place is to factory reset it before first use? Iunno. Things may change and issues may pop up the more I use it and as time passes - but so far, so good!
Again, I can't thank XDA enough for the advice and info. I've found and been given.
Sprdtyf350 said:
If you can figure out how to brick it you will probably get an award.. It won't be a good award but probably one of those top ten dumb things people do awards. So far unless you plug the motherboard into a wall socket no one has bricked one. May think they have, but like I said before I doubt it..
And your right.. If it can be done, someone eventually will figure out how. And then we will all laugh at them.. At least I will
Click to expand...
Click to collapse
I figured it out. Accidentally hit one of the devkit nvflash .cabs and boom
I'v jailbroken itouches several times flawlessly so the concept of rooting is not new to me. I understand what has to be done and what it does for the device, positively anyway. I'v had the G2x for about 2 weeks now and i'm thinking about rooting it, but i don't want to do it without knowing all of the cons. I know i would be voiding my warranty, and that i might not get direct updates from my service provider anymore. I'v also read a lot about people rooting it without error, but for some reason after rooting the phone crashes. i took the risk of jailbreaking my itouch because i had it for 2 years already when i decided to jailbreak it, and because it's basically still just an mp3 player. This time it would be a phone which is more important to me. im also aware that gingerbread is coming out soon, so if someone could explain to me what the negatives are or at least point me in the right direction if this thread is already answered i would appreciate it.
With my phone, unrooting is easy if you know what you're doing, so I don't worry about the warranty part. The usual horror stories about rooted phones are usually due to user error. If you don't know what you're doing and don't fully read the instructions, you can end up doing some damage that is either difficult or impossible to fix. I think some people root their phones just for wireless tether, ad blocking, screenshots, or some "root only" app they see in the market. Then they decide they want to change their status bar icons or something and flash something that was not made for their phone or the stock rom... or whatever the situation may be.
My point is, if you know what you're doing you'll be fine. You should be able to go back to stock, unrooted - I'm not familiar with your phone, so I'm speaking in generalities. There are already Gingerbread roms out for many devices that haven't received official updates yet, even for phones that will never receive an official 2.3 update.
The only downside of rooting that I can think of is that you won't be able to put your phone down. Ultimately the choice is yours. If you don't want to put the time into learning, don't do it. It's a ton of fun though, I couldn't imagine not being rooted... there's so much more available for rooted phones.
My Evo + xda Premium App = This post.
I have the T959v android phone, which I found out is a bit more complicated than my Samsung Vibrant.
I am running the gingerbread kernel after using Kies.
I have finally successfully flashed the T959v using Heimdoll following this guide. http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Super User has been installed using SuperOneClick.
After struggling with it and reading on some sites it's possible and some sites it's not possible, I've come to the conclusion that Rom Manager is not a good idea to use, to install a Rom on my particular phone.
I want to install this Rom here: http://forum.xda-developers.com/showthread.php?t=1402966
However I reviewed the instructions and found I was lost on some parts.
I know how to get to recovery mode (with the phone turned off, hold down volume up and down and the power button)
However, here's where I get lost:
6. Perform Voodoo -> Disable Lagfix.
I do not have this option, likely because I'm missing voodoo or some sort of app. I've tried googling this and figuring out what it is, but I don't even know what a CWM is.
I haven't tried (since I'm atleast smart enough to review information before I start following them, lest I get myself stuck somewhere and unable to back out of). However I believe I can get as far as Step 5.
Unfortuantely I can't get any further.
The only apps I have installed (besides the annoying bloatware on the phone) are the ones I listed above.
This is my first time flashing a phone or doing any of the above, previously my friend did it for me.
So I apologize for whatever Incompetence I may have, however if you can simplify instructions I'm pretty good at following them.
The hard part is that I don't know how to do a lot of the instructions.
Is there a video? Perhaps a guide with pictures that includes all the software I need and how to install that software?
I'm sorry for the questions, I hope someone can help. This has been a long and frustrating process but I'm determined to finish it.
Thank you in advance.
Ah also this: "Must have pre-installed kernel with clockwork recovery!"
I cannot do this because when I try and use clockwork recovery it says it cannot support my phone.
It gives me a list of 4 devices, none of which are my phone.
Then I click on "My device is not listed" and it states the T959v is not supported.
I'm really sorry for all the questions.
Not only does this app look nice, and sound nice due to hardware acceleration. Above all it gets rid of that bloatware crap from T-mobile.
I look forward to giving this app a try.
Hello my friend i know how excited you are when it come's to flashing, installing, removing apps on your phone, but before you do any harm to your phone maybe
consider reading this http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G before going further. it save's you a lot of time and headache plus you can avoid
flaming from other people here. and also try to use the search bar just i case you have further question's..
I advice you to take some time to read first on what do you want to your phone before doing anything.. don't be in a hurry we have tons of great roms in here..
Do not use clockwork manager...it is not for this device!
If you have super user ur rooted and good to go ...i would suggest you play around with the gingerbread roms for a spell before going to icecream sandwich roms,just so you get a feel for flashing on this device.....i too came from the vibrant and dearly miss it.
This phone is far from a vibrant but is coming along.
Feel free to pm me.....I may be a bit slow on replies since I'm working 7/12's 3rd shift.
Thank you both so much for your replies.
Warren I am checking that link out right now. Thanks
Shortbus, I miss my Vibrant too.
Technically speaking my Vibrant is still usable, but ever since I dropped it and cracked the screen it seems to have drastically slowed down (and the screen is annoying with all the cracks too).
Sad day for me.
I still want to try and get that Rom I had posted above working, as I doubt I'll move to another rom anytime after that. But I'll try and learn more about it using the link you gave me Warren. It'll probably take me several days ~_~
Shortbus I may email you with questions I come across from time to time if that's ok
Squeezitgirdle said:
Thank you both so much for your replies.
Warren I am checking that link out right now. Thanks
Shortbus, I miss my Vibrant too.
Technically speaking my Vibrant is still usable, but ever since I dropped it and cracked the screen it seems to have drastically slowed down (and the screen is annoying with all the cracks too).
Sad day for me.
I still want to try and get that Rom I had posted above working, as I doubt I'll move to another rom anytime after that. But I'll try and learn more about it using the link you gave me Warren. It'll probably take me several days ~_~
Shortbus I may email you with questions I come across from time to time if that's ok
Click to expand...
Click to collapse
If you want to install Valhalla Final - read the guide in the first link of my signature and begin where applicable.
I don't mind.
Flashing roms on this device is easy once you realize its not the vibrant lol.
Like the vibrant....this thing is near impossible to brick,....just a lil bit more complicated than the vib.....till you get to understand it.
lumin30 said:
If you want to install Valhalla Final - read the guide in the first link of my signature and begin where applicable.
Click to expand...
Click to collapse
Ah, so I should switch to Froyo instead of Gingerbread from the looks of it.
I'll get right on that I'm going to try following your guide now
edit: I saw that you switched to Gingerbread, jumped too far ahead of myself.
I'm getting pretty far along in the guide, I'm now at the part where I am about to install the rom.
I love that you guys respond so quickly too.
In the process of using Heimdall I ran into so many issues but was (slowly) able to work through them and figure them out.
It's nice to know I can come here if I have a quick question.
I'm not much help with heimdall....I use gremlin remover,its a one click Odin program....serves the same purpose....to bring you to a rooted stock state.
Okay, I know I don't post much in XDA, but I do read a LOT of threads!
The reason I am posting this is because I am wondering if anybody achieved root on this phone.
I have tried KingRoot, KingoRoot, OneClickRoot, none of those work.
It is running Android 6.0.1 Marshmallow.
I am about to screw around with ADB, see what I can do. I'll post back when I have got something.
Sorry if I posted this in the wrong section, I don't post much on XDA.
any luck?
I've tried every root method available without the PC and nothing. But, there maybe good news. In developers options there's a switch to unlock the bootloader. Now I'm no dev but I hope this makes cwm or tarp easy for devs to port and root.
I found https://mobile.twitter.com/srsroot/status/810325782417592325?lang=en srsroot claims it supports ZTE Z833. I've used srsroot once before but on another phone I have no PC so I can't test it but someone should test Cydia impactor see if it works.
RE: comments
kotarou1 said:
I found https://mobile.twitter.com/srsroot/status/810325782417592325?lang=en srsroot claims it supports ZTE Z833. I've used srsroot once before but on another phone I have no PC so I can't test it but someone should test Cydia impactor see if it works.
Click to expand...
Click to collapse
1. I too saw that twitter SRSRoot business and tried it thinking, "Oh joy!" no, not working. Tried it every way you could (yes Kingo, KingRoot, vRoot, iRoot, FramaRoot, uRoot, & we-all_Root (the last two were jokes don't be so serious, nor was it a complete list of what I did actually try, ha!) too). I even wrote the people at SRSRoot telling them that it didn't work and have gone back to download their latest versions, still nada, zip, zero. FML on toast!
2. Cydia Impactor is not for Android devices, it is only for iOS. I went and double-checked just to make sure I wasn't trippin' thinking that maybe they have gone cross-platform. No, they have not.
3. I have the phone in question, I submitted a formal request on here in the best way I could find to get it added to the XDA devices list and I have been eagerly monitoring awaiting the day it happens. I was even considering trying to compile TWRP myself, but I just bought a different phone because I was tired of the headache. I couldn't figure out how to extract the zImage from it in order to give it a go (I think that's what it was). Anyways, I'm writing this before finishing reading the rest of the posts and may be rambling, but I had to respond. I have spent much time doing this. I ended up buying a different MetroPCS phone called the Samsung Galaxy On5 and was able to successfully root it and after much waiting finally got ahold of the Superstarz ROM that finally went out for that one. Just an FYI in case someone happens to see this before making the purchase. I will say that I feel like the ZTE Avid Trio Z833 has pretty good response time for such a cheap phone, then again they had a deal on it in the store, it looked to be more expensive at retail pricing. Anyhow, I digress, but felt the need to contribute rather than just lurk.
Oh, and another thing... The development option to OEM Unlock is "checkable", but as for actually booting to the bootloader it WILL NOT DO IT. The only way this is gonna happen to be rootable is if you use a custom recovery (which none exist yet) in a tar format and ODIN the friggin thing from download mode. So, there's your catch 22. If anyone knows how to extract the zImage and whatnot (without root obviously) I'd be more apt to give it a go and boot my happy bunghole into Linux and give compiling TWRP another go. I finally have had a lot of life stresses temporarily die down since I decided not to leave my current living situation and just stay with these irritating bastards another month at a higher rate. FML & Cheers!: good:
I should mention, however, that SRSRoot attempted to use it's "Exploit 8." So, I went digging into it's directories to see what the script was, but it was binary (and I didn't have reverse-engineering **** handy like PE-ID, and whatever else the kids are using in this newer age). So, I was like "wah-wah", but if any experienced ppl know more about the specific exploits that aren't ancient and actually working with Marshmallow that would be interesting to hear feedback about as well. Thanks. I really would like to use this second phone still, but right now I'm just using it as a Kodi/Megabox HD + AllCast Projector to watch streaming things without having to interrupt my working phone in the middle of it. It would also be cool to use as a straight VOIP phone with no cell service connected, but I've yet to find the free Google Voice VOIP loophole that is currently working. PM me if you know of these
P.P.S. I wrote another spicy post on hardr3set dot info about what crap I felt about their B.S. (weaksauce compared to anything legit which we all know you come to XDA for the meat-and-potatoes) because I was so tired of searching the Goog for root ZTE Avid Trio Z833 and having it be the top result over and over. Finally this has risen up. Thank you for starting this. Oh, and also, please... If you would kindly also request for this device to be added formally, maybe it would encourage development. Not sure how all that works, but yeah... power in numbers right?
Sincerely,
~Ye of little faith
Bump
are you telling me that faults advertising runs ramped all over the internet even Google play store and this is the nondoing phone ever made and it can't be jailbroke nor rooted
Rooting your zte device
Can not be done. This phone is an unfortunate accident by ZTE with numerous problems and they are not small issues but ones that affect the performance of the device. Replace that phone or your only adding to your daily stress.
That kingroot and oneclickroot don't work
For this phone
a
Guessing this is a dead issue? It's an okay phone but lags horribly when it comes to multi tasking
Hey I don't want the root thing to die on this topic. So would it be possible to root via ADB update in recovery mode? Or to somehow update via SD card and applying root? I refuse to give up hope on this device lol
Anyone made progress on this? I just got this phone and it definitely has some issues, but I feel like root would resolve most of them.
Has anyone figured out a way to root this device?
I've searched for a long time without success. I hope something comes up.
Any progress on this? Thanks
following, bought one this morning hoping to have a cheap rootable phone.
I got mine from MetroPCS for $29. lol Yes, it's frustrating and has got problems (I've already put two of them through my dashboard and had to replace them, within the first 2 months, but it only cost 30buck so WTH. Anyways, I decided after I destroyed #2 that I was only going to use it for work and add no apps to it, except maybe GasBuddy and Winamp. Other than that, it's stock and I haven't had any real problems with it to speak of (problems aggravating enough to make me want to destroy it yet again).
So my suggestion to anyone who owns this phone, or is thinking about owning one: Don't install any more than a couple small apps, add a 32GB uSD card for music and other stuff, and use the thing as a phone and a media player only. The camera is pretty much worthless for quality photos, so there's really no other use for it. But it makes a great txting, voice calling, and music playing phone!
Of course, if you end up paying more than $30 for it, you probably paid too much. But it sure is a pretty nice phone for 30 buck!
Yes. root it please
I have a Z833. The phone only lags apps that are over 100mb I'll have test this out agin
I have ordered one of these phones for $20 should be here by Monday. When it arrives I'll be able to confirm if its bootloader is unlocked or not. In the meantime here is the firehose and support files (rawprogram0.xml and patch0.xml) as well as the MetroPCS B16 firmware to be flashed with QFIL or MiFlash. This will allow people to recover their device and hopefully if the bootloader isn't locked flash custom images.
Support files
https://www.androidfilehost.com/?fid=1395089523397898033
V1.0.0 B16 Firmware
https://www.androidfilehost.com/?fid=1395089523397898034