Database Info

How to copy cwm backup to many devices of the same type?

Sorry for don't knowing the correct section for this thread.
I installed a custom rom (CM 10.1, with special settings and software) to an Android phone (Samsung GT-S7710).
Now I have to copy this exact system to about 150 devices of the same type.
Is this possible with an cwm backup??
I've also tried to build a odin flashable *.tar file, but don't successful.
What's the best way to make an image of the entire Android system, with all the settings and data. (if possible also from the internal sdcard)
ps.: I have to do the same with a samsung galaxy tab 2 7.0
Thanks very much in advance!

geopicture said:
Sorry for don't knowing the correct section for this thread.
... Is this possible with an cwm backup?? ...
Thanks very much in advance!
Click to expand...
Click to collapse
I alwaysthought that was possible with CWM.

Wotzit said:
I alwaysthought that was possible with CWM.
Click to expand...
Click to collapse
yes it is possible, but I have troubles with the radio/modem every time.
i have to switch on and off the flightmode before i get a signal.

geopicture said:
yes it is possible, but I have troubles with the radio/modem every time.
i have to switch on and off the flightmode before i get a signal.
Click to expand...
Click to collapse
Make a new nandroid back up after toggling the flight mode and then use the new one to modify all the other devices.

justmpm said:
Make a new nandroid back up after toggling the flight mode and then use the new one to modify all the other devices.
Click to expand...
Click to collapse
Thanks for your help, but it's still not working. I'm using the cm 10.1 rom by flxo.
I flashed the correct stock rom (like flxo mentioned) and installed the custom rom, but the signal returns not before toggling the flight mode or waiting for about 10 minutes...
Any other ideas?

geopicture said:
Any other ideas?
Click to expand...
Click to collapse
you can try flashing only the modem again, You can use Mobile odin or flashify or flash gordon or CWM
Check this out! You , YES! you are an " Android ". Not your phone but U.​

Install the Rom (because you need to flash the kernel)then restore the data partition :thumbup:
Sent from my Xperia Live with Walkman using xda app-developers app

CLINTZ9 said:
Install the Rom (because you need to flash the kernel)then restore the data partition :thumbup:
Click to expand...
Click to collapse
Thanks for your reply. What's the best way to restore the data partition on Samsung Phones?
I tried to "dd if=...mmcblk0p25 of=...extsdcard/data.img" - then (in cygwin) I made a tar.md5 out of it and triet to flash it with odin???
But it didn't work.

[Q] CM12 Flash

I'm on 44S firmware and want to flash CM12 so I have unlocked the bootloader, installed Philz Recovery 6.59.1 and wiped cache/dalvik and install new ROM option but the recovery can't seem to find the .zip files I put on the phone?

Can someone help me please

Lither said:
Can someone help me please
Click to expand...
Click to collapse
I'd advise you to use TWRP instead of Philz

I agree, use TWRP recovery instead, it's much better.
Transmitted via Bacon

waterdaan said:
I'd advise you to use TWRP instead of Philz
Click to expand...
Click to collapse
Which version of TWRP, unofficial or bacon?
Since I've wiped cache/dalvik and install new ROM option, the .zip files should remain on my phone memory?

Lither said:
Which version of TWRP, unofficial or bacon?
Since I've wiped cache/dalvik and install new ROM option, the .zip files should remain on my phone memory?
Click to expand...
Click to collapse
Latest
http://dl.twrp.me/bacon/twrp-2.8.6.0-bacon.img
Flash with flashify apk if you've got root or fastboot
Yes zip file stays on phone memory

waterdaan said:
Latest
http://dl.twrp.me/bacon/twrp-2.8.6.0-bacon.img
Flash with flashify apk if you've got root or fastboot
Yes zip file stays on phone memory
Click to expand...
Click to collapse
Thanks, I will give that a try but don't know why Philz Recovery didn't find the .zip files on phone memory

No idea.
This is the first time that he is not your .zip?

Lither said:
Thanks, I will give that a try but don't know why Philz Recovery didn't find the .zip files on phone memory
Click to expand...
Click to collapse
no idea.. but most users use twrp now.. more user friendly

[ROM] 5.1 For N910H [TWRP backup File]

TWRP backup for 5.1 system and boot to run it on N910H
rom based on N910CXXU1COH4
Installation
1- extract the file and copy the extracted file to TWRP folder in internal storage
2- reboot into recovery
3- make a full wipe ( dalvik , data & system)
4- go to restore option
5- select backup file and swipe to restore
6- reboot and enjoy ! ^__^
Download Link
*IMPORTANT NOTES
1- for people who their TWRP cant detect backup file follow this steps :-
1- enter recovery
2- make a small backup like backup for boot only
3- reboot and go to my files
4- copy the backup folder of this rom which called 2015-08-26--18-57-38_LMY47X.N910CXXU1COH4 to the small backup folder
5- reboot to recovery and follow the steps above
2- root is not available for this rom yet ! so dont try to flash supersu.zip or flash supersu.tar cause you will have bootloop
3- this ROM made to N910H , so if you want to try it on N910C or N910U try it on your own risk

Thanks. I hope Efs is not included in this backup.

pedodroid said:
Thanks. I hope Efs is not included in this backup.
Click to expand...
Click to collapse
No , just system and boot

Sony guy said:
No , just system and boot
Click to expand...
Click to collapse
Good Man! I'll download once i get home.

pedodroid said:
Good Man! I'll download once i get home.
Click to expand...
Click to collapse
Thank you

Wouldn't making a full wipe of the data delete the backup file inside twrp?

Pannam said:
Wouldn't making a full wipe of the data delete the backup file inside twrp?
Click to expand...
Click to collapse
u have to do factory reset(deleting data), this doesnt delete your internal storage

Do we get to keep root or is just the twrp recovery working?

Pannam said:
Do we get to keep root or is just the twrp recovery working?
Click to expand...
Click to collapse
Just twrp recovery

I did a full wipe n than tried restoring from twrp however after restoring system it fails and if I reboot it stucks at note 4 logo screen
please help

xferianeov said:
I did a full wipe n than tried restoring from twrp however after restoring system it fails and if I reboot it stucks at note 4 logo screen
please help
Click to expand...
Click to collapse
Did you mean The restore operation is failed ? or the restore is complete successfully and when reboot it freeze on samsung logo ? if it successful and freeze on samsung logo then go to recovery and make fix permission

Sony guy said:
Did you mean The restore operation is failed ? or the restore is complete successfully and when reboot it freeze on samsung logo ? if it successful and freeze on samsung logo then go to recovery and make fix permition
Click to expand...
Click to collapse
Sorry my mistake i dint extract the zip file correctly earlier.
now all is well, 5.1.1 is so buttery smooth
thanka a lot sony guy

xferianeov said:
Sorry my mistake i dint extract the zip file correctly earlier.
now all is well, 5.1.1 is so buttery smooth
thanka a lot sony guy
Click to expand...
Click to collapse
Congratulations bro ^_^

Thank you for your effort downloading it right now, but i have a question cant i download the firmware from sammobile and flash it with odin on my n910h directly ? do i need to flash modem or something like that ?

hey guys can I use GoogyMax on this Rom? Any help will be appreciated, thanks in advance

yoniinfante said:
hey guys can I use GoogyMax on this Rom? Any help will be appreciated, thanks in advance
Click to expand...
Click to collapse
No.!!! At moment we need to wait for samsung to release Kernel source for android 5.1.1 firmware and there are big knox security related changes which makes root also impossible on stock kernel at moment.

Can someone tell me how extacly to do this? should i extract the zip 1 time and end up with 41005ee545b791bb and then put it in TWRP folder ?

djmax81 said:
No.!!! At moment we need to wait for samsung to release Kernel source for android 5.1.1 firmware and there are big knox security related changes which makes root also impossible on stock kernel at moment.
Click to expand...
Click to collapse
Thanks for the quick response brother, I will wait then, I have too many apps data on Titanium Backup :/

tareqjordan said:
Can someone tell me how extacly to do this? should i extract the zip 1 time and end up with 41005ee545b791bb and then put it in TWRP folder ?
Click to expand...
Click to collapse
Yes .!!! You may copy that folder into TWR folder along with your other Backups and restore via recovery.
---------- Post added at 03:28 AM ---------- Previous post was at 03:27 AM ----------
yoniinfante said:
Thanks for the quick response brother, I will wait then, I have too many apps data on Titanium Backup :/
Click to expand...
Click to collapse
No worries !!!!

well i did that and it didnt show in restore ! i even put it on usb and it didnt show up either

Marshmallow on Nexus 4

Hello! I have watched your Youtube video Of Marshmallow running on Nexus 4. I want some assistance from your side. I have a rooted Nexus 4 and I also want to install Marshmallow on my nexus 4. I have downloaded the Frank N4 rom and the google apps as provided from the link in your video description. Both are zip files of 201Mb and 199 Mb respectively. So how can I install that rom and Gapps? Please help. I have copied both the zip files to my Phone. 
Can I now turn my phone in to recovery mode and then flash the rom and then Gapps?
Or what is the recommended way? Please help me.

RehanEmoPunk said:
Hello! I have watched your Youtube video Of Marshmallow running on Nexus 4. I want some assistance from your side. I have a rooted Nexus 4 and I also want to install Marshmallow on my nexus 4. I have downloaded the Frank N4 rom and the google apps as provided from the link in your video description. Both are zip files of 201Mb and 199 Mb respectively. So how can I install that rom and Gapps? Please help. I have copied both the zip files to my Phone. 
Can I now turn my phone in to recovery mode and then flash the rom and then Gapps?
Or what is the recommended way? Please help me.
Click to expand...
Click to collapse
1. put on twrp recovery, if you dont already have it
2. boot into recovery
3. wipe data, cache, and dalvic cache in advanced wiping options (note all data, pics etc will be lost)
4. install rom and gapps using the install tab
5. reboot

bweN diorD said:
1. put on twrp recovery, if you dont already have it
2. boot into recovery
3. wipe data, cache, and dalvic cache in advanced wiping options (note all data, pics etc will be lost)
4. install rom and gapps using the install tab
5. reboot
Click to expand...
Click to collapse
How to put on TWRP recovery?

Well you can put TWRP recovery from fastboot mode or try an app called flaahify to install TWRP

droid_god said:
Well you can put TWRP recovery from fastboot mode or try an app called flaahify to install TWRP
Click to expand...
Click to collapse
In the flashify app there is an option to download TWRP? Should I download it from there?
There are various versions also and 2.8.7.0 us the latest one?. Should I download the latest one?

I just have to copy the TWRP 2.8.7.0 in my phone's storage?

And now flaah it using flaahify

RehanEmoPunk said:
I just have to copy the TWRP 2.8.7.0 in my phone's storage?
Click to expand...
Click to collapse
i dont use flashify, but i think you just pick the one you want, then click install.
if you want more clarification on how to install it properly, im sure there is a twrp thread in the n4 forum which will provide instructions to install it.

I have copied the frank-mako rom(201mb) and Banks-Gapps6(199mb) zip files in my nexus 4 along with the TWRP-2.8.7.0-Mako.img(8.82mb).
Now what steps should I take to update my Nexus 4 to Marshmallow? Please help me. Thanks in Advance

Go on to flaah recovery and then clean flash rom and reboot. After reboot dont do anything just switch off and boot onto recovery and flaah gapps and then do a normal bootto use rom and enjoy.

RehanEmoPunk said:
I have copied the frank-mako rom(201mb) and Banks-Gapps6(199mb) zip files in my nexus 4 along with the TWRP-2.8.7.0-Mako.img(8.82mb).
Now what steps should I take to update my Nexus 4 to Marshmallow? Please help me. Thanks in Advance
Click to expand...
Click to collapse
we have been helping you, but if you have the twrp img on the phone and didnt install it already, you are not listening.
good luck with getting it setup, i for 1 will not continue to help when you dont or cant follow direction.

Spend a few days researching before you end up with a brick. This is not a support site.

bweN diorD said:
we have been helping you, but if you have the twrp img on the phone and didnt install it already, you are not listening.
good luck with getting it setup, i for 1 will not continue to help when you dont or cant follow direction.
Click to expand...
Click to collapse
Thanks alot ?

Can I install the frank-N4 Marshmallow rom through the Nexus Root Tool kit?

RehanEmoPunk said:
Can I install the frank-N4 Marshmallow rom through the Nexus Root Tool kit?
Click to expand...
Click to collapse
Well i dont know about that will work or not.
But the recovery will always work

RehanEmoPunk said:
Can I install the frank-N4 Marshmallow rom through the Nexus Root Tool kit?
Click to expand...
Click to collapse
Don't bother with root kits. They will lead you to nothing but trouble.

RehanEmoPunk said:
Can I install the frank-N4 Marshmallow rom through the Nexus Root Tool kit?
Click to expand...
Click to collapse
zelendel said:
Don't bother with root kits. They will lead you to nothing but trouble.
Click to expand...
Click to collapse
while i agree people need to learn how to do it the right way, i am well versed in adb and fastboot, but i have use wugs forever and never had an issue.
i have to believe most of the problems come from user error, which the same could be said for manual installs. wug makes a solid tool and has put a ridiculous amount of work into it.
however, im not sure if it can install a custom rom, regardless, if you cant flash a zip without a tool, you shouldnt be modding anything, i def agree with that

[STOCK][NOUGAT][Rootable] LG K10 MS428

Hi guys!
I have created a TWRP flashable zip of latest Stock Nougat Rom for MS428.
Requirements:
(1) Unlocked Bootloader
(2) TWRP
Steps:
(1) Download the ZIP
(2) Copy it to your phone.
(3) Reboot into TWRP.
(4) Select "Install". Select the zip file you downloaded in the first step.
(5) Swipe to flash. Wait for it to flash. It might take some time. Wipe Dalvik/Cache to avoid bootloops.
(6) Select Reboot.
You have successfully flashed Nougat!
If you want root, download SuperSu Flashable Zip. Reboot into TWRP. Select the SuperSu flashable zip. You have successfully rooted!
I will keep updating the ZIP as and when LG releases a new ROM or patch.

Added download link.

Should I wipe?

GuyInDogSuit said:
Should I wipe?
Click to expand...
Click to collapse
Posted instructions.

Is that the stock recovery?
Nevermind, it's TWRP. Compared the file sizes.

Well, after 20 mins it rebooted but it's still 6.0.1....
Gonna try wiping and reflashing it.

Well, this doesn't work. I don't know why, but it doesn't stick. I wiped and got a warning that the device had no OS.

GuyInDogSuit said:
Well, this doesn't work. I don't know why, but it doesn't stick. I wiped and got a warning that the device had no OS.
Click to expand...
Click to collapse
You didn't wipe your device properly. Wipe Dalvik, system, data and cache.

pvineeth97 said:
You didn't wipe your device properly. Wipe Dalvik, system, data and cache.
Click to expand...
Click to collapse
I wiped EVERYTHING except the SD card. @JoeMoDo says there's an error in your updater script preventing it from properly flashing.

GuyInDogSuit said:
I wiped EVERYTHING except the SD card. @JoeMoDo says there's an error in your updater script preventing it from properly flashing.
Click to expand...
Click to collapse
Will look into it!

pvineeth97 said:
Will look into it!
Click to expand...
Click to collapse
In Hangouts he said,
package_extract_dir("system", "/system");
Should be
package_extract_dir("system.bin", "/system");
Sorry scratch that, it should be system.img not bin
Err, SCRATCH THAT. he extracted system.img before line 34 for a by-name
package_extract_file("system.img", "/dev/block/platform/soc.0/by-name/system");
Click to expand...
Click to collapse
Haven't heard back from him yet but he'll test it.

GuyInDogSuit said:
In Hangouts he said,
Haven't heard back from him yet but he'll test it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-k10/development/rom-lineageos-14-1-t3649290

HELP
can it works on a LGK10 M250H?
(mi lg stuck in download mode)

eriksanchez said:
can it works on a LGK10 M250H?
(mi lg stuck in download mode)
Click to expand...
Click to collapse
no. LG K10 M250H is a different phone and different SoC.

Any luck getting this working?

GuyInDogSuit said:
Any luck getting this working?
Click to expand...
Click to collapse
Yup... I will release fixed one soon.

pvineeth97 said:
Yup... I will release fixed one soon.
Click to expand...
Click to collapse
hell yea

Any luck?

STILL hasn't been fixed.

Is this project dead?