Database Info

Star b92m cwm recovery root + CWM AND ROM BACKUP + 2.5G DATA + TABLET UI

hello i make cwm (backup not working correctly)
but other working nice and make hacked boot.img when busybox is in system
you can root phone by "ADB ROOT" command
i dump and edit original files form my B92M phone !!!!!!
i havent got stock rom i have it dumped but it have 800MB
flash it by SP Flash Tool
here is link
CWM RECOVERY + EDITED BOOT ONLY
http://www.uloz.to/xU2BNWt/cwm-root-b92m-zip
or in english
http://www.ulozto.net/xU2BNWt/cwm-root-b92m-zip
FULL ROM WITHOUT SYSTEM
(not tested use it when you have bricked phone only)
http://uloz.to/xjPQWHh/rom-backup-zip
or
http://ulozto.net/xjPQWHh/rom-backup-zip
SYSTEM FOR ROM BACKUP
(not tested use it when you have bricked phone only)
http://uloz.to/xmjTVSJ/system-zip
or
http://ulozto.net/xmjTVSJ/system-zip
CWM BACKUP OF SYSTEM AND CACHE
(restore it by advanced restore)
http://uloz.to/xLYKNWt/backupcwm-zip
or
http://ulozto.net/xLYKNWt/backupcwm-zip
2.5 GB DATA PERMANENT ROOT + FULLY WORKING RECOVERY
(for 2.5gb data after flash you must format data in recovery)
http://uloz.to/xC6fACS/2-5gb-data-perm-root-zip
or
http://ulozto.net/xC6fACS/2-5gb-data-perm-root-zip
TABLET UI MODE REPLACE SERVICES.JAR IN framework and change dpi to 169
http://uloz.to/xXo5qo8/services-jar
or
http://ulozto.net/xXo5qo8/services-jar

brick the phone, help me.
veisen said:
hello i make cwm (backup not working correctly)
but other working nice and make hacked boot.img when busybox is in system
you can root phone by "ADB ROOT" command
i dump and edit original files form my B92M phone !!!!!!
i havent got stock rom i have it dumped but it have 800MB
flash it by SP Flash Tool
here is link
http://www.uloz.to/xU2BNWt/cwm-root-b92m-zip
or in english
http://www.ulozto.net/xU2BNWt/cwm-root-b92m-zip
Click to expand...
Click to collapse
i have my phone bricked. i have formatted all the memory. Could you help me?
I need entire rom with all file .img and .bin including preloader and uboot to flash in sp flash tool..
i'm desperate please help! Thank you!

luka91861 said:
i have my phone bricked. i have formatted all the memory. Could you help me?
I need entire rom with all file .img and .bin including preloader and uboot to flash in sp flash tool..
i'm desperate please help! Thank you!
Click to expand...
Click to collapse
UPLOADED 1ST POST
flash FULL ROM WITHOUT SYSTEM and restore CWM BACKUP OF SYSTEM AND CACHE in CWM by advanced restore

veisen said:
UPLOADED 1ST POST
flash FULL ROM WITHOUT SYSTEM and restore CWM BACKUP OF SYSTEM AND CACHE in CWM by advanced restore
Click to expand...
Click to collapse
ok i tried but the phone doesn't enter in recovery mode. Which buttons do i press to enter in recovery mode?
can you post also system.img and cache.img
you are fantastic! Thank you!

veisen said:
hello i make cwm (backup not working correctly)
but other working nice and make hacked boot.img when busybox is in system
you can root phone by "ADB ROOT" command
i dump and edit original files form my B92M phone !!!!!!
i havent got stock rom i have it dumped but it have 800MB
flash it by SP Flash Tool
here is link
CWM RECOVERY + EDITED BOOT ONLY
http://www.uloz.to/xU2BNWt/cwm-root-b92m-zip
or in english
http://www.ulozto.net/xU2BNWt/cwm-root-b92m-zip
FULL ROM WITHOUT SYSTEM
(not tested use it when you have bricked phone only)
http://uloz.to/xjPQWHh/rom-backup-zip
or
http://ulozto.net/xjPQWHh/rom-backup-zip
SYSTEM FOR ROM BACKUP
(not tested use it when you have bricked phone only)
http://uloz.to/xmjTVSJ/system-zip
or
http://ulozto.net/xmjTVSJ/system-zip
CWM BACKUP OF SYSTEM AND CACHE
(restore it by advanced restore)
http://uloz.to/xLYKNWt/backupcwm-zip
or
http://ulozto.net/xLYKNWt/backupcwm-zip
Click to expand...
Click to collapse
luka91861 said:
ok i tried but the phone doesn't enter in recovery mode. Which buttons do i press to enter in recovery mode?
can you post also system.img and cache.img
you are fantastic! Thank you!
Click to expand...
Click to collapse
volume UP AND power and keep volupe up pressed wait
reinsert battery first

ok i have entered in cwm but when i go on advanced restore. i have this message: E: can't mount sdcard
cwm doesn't work properly. cant't mount anything...
maybe because i need mbr and ebr1 because i have bricked and in those files i have information about partitions...
maybe i need also dsp_bl and sec_ro

luka91861 said:
ok i have entered in cwm but when i go on advanced restore. i have this message: E: can't mount sdcard
cwm doesn't work properly. cant't mount anything...
maybe because i need mbr and ebr1 because i have bricked and in those files i have information about partitions...
maybe i need also dsp_bl and sec_ro
Click to expand...
Click to collapse
in this package you have full system without system.img
FULL ROM WITHOUT SYSTEM look on first post

to unbrick we need also userdata and cache

luka91861 said:
to unbrick we need also userdata and cache
Click to expand...
Click to collapse
no
i unbrick mtk6577 and 6575 phones without data and cache partition

veisen said:
no
i unbrick mtk6577 and 6575 phones without data and cache partition
Click to expand...
Click to collapse
Ok i have unbricked. But i have used also cache and data. Now everythigs goes fine.
Thanks so mouch! Is possible start a jelly bean project togheter? I see that other mtk6577 had recived an official jb update. What can we do?

Thanks mate for CWM?
I've flashed and confirms it works.
Here is a good tutorial i followed. Make sure you have MT6577 drivers first-
http://bm-smartphone-reviews.blogspot.co.uk/2012/05/mt6575-flashing-tutorial.html

ahmadcentral said:
Thanks mate for CWM?
I've flashed and confirms it works.
Here is a good tutorial i followed. Make sure you have MT6577 drivers first-
http://bm-smartphone-reviews.blogspot.co.uk/2012/05/mt6575-flashing-tutorial.html
Click to expand...
Click to collapse
i repair CWM and have it fully works upload soon

Thinking to buy this cell...
veisen said:
hello i make cwm (backup not working correctly)
but other working nice and make hacked boot.img when busybox is in system
you can root phone by "ADB ROOT" command
i dump and edit original files form my B92M phone !!!!!!
i havent got stock rom i have it dumped but it have 800MB
flash it by SP Flash Tool
here is link
CWM RECOVERY + EDITED BOOT ONLY
http://www.uloz.to/xU2BNWt/cwm-root-b92m-zip
or in english
http://www.ulozto.net/xU2BNWt/cwm-root-b92m-zip
FULL ROM WITHOUT SYSTEM
(not tested use it when you have bricked phone only)
http://uloz.to/xjPQWHh/rom-backup-zip
or
http://ulozto.net/xjPQWHh/rom-backup-zip
SYSTEM FOR ROM BACKUP
(not tested use it when you have bricked phone only)
http://uloz.to/xmjTVSJ/system-zip
or
http://ulozto.net/xmjTVSJ/system-zip
CWM BACKUP OF SYSTEM AND CACHE
(restore it by advanced restore)
http://uloz.to/xLYKNWt/backupcwm-zip
or
http://ulozto.net/xLYKNWt/backupcwm-zip
Click to expand...
Click to collapse
Hi Friend;
Im'thinking to buy this cell. Can you tell me cons and pros? thanks for your cooperation!!!:good:

tanoobx said:
Hi Friend;
Im'thinking to buy this cell. Can you tell me cons and pros? thanks for your cooperation!!!:good:
Click to expand...
Click to collapse
i complete custom rom soon and i realy like this phone
with stock rom have problem with GPS long time lock but i fix it in rom
rom will be multilanguage (all android languages)
now 2.5gb data partition complete (upload soon)

Fantastic! is the ROM compatible with 512mb phone?

Veisen,
I appreciate your support for this phone my friend. Please let me know how you get on with they custom rom. I will be happy to use and test for you.

+1

luka91861 said:
+1
Click to expand...
Click to collapse
look first post
2.5gb data + fully working recovery
this rom is compatible with 512mb rersion

Now i have invalid imei message. What can I do?
solved!

veisen said:
look first post
2.5gb data + fully working recovery
this rom is compatible with 512mb rersion
Click to expand...
Click to collapse
Thank you for this-
In rom you are working on,
Have you fixed the random crashes and gps taking long time to fix.
I will install asap to test.
Luka- Please tell how you solved IMEI problem in case i get same issue. Thanks.

[Q] Backup And Restore related issues ....

Is there any way to Backup and Restore the Stock recovery(not the whole Rom) of a Tablet?????

Biswajyoti said:
Is there any way to Backup and Restore the Stock recovery(not the whole Rom) of a Tablet?????
Click to expand...
Click to collapse
Yes,
you can get the stock recovery.
By flashing stock Recovery when you need it....
----------Signature---------
Need Some Cool Guides Visit Hmpshah Guides

Biswajyoti said:
Is there any way to Backup and Restore the Stock recovery(not the whole Rom) of a Tablet?????
Click to expand...
Click to collapse
flash from pc

AXD96 said:
flash from pc
Click to expand...
Click to collapse
Actually I have a rooted HCL ME Y3 tablet.....and also have the stock rom for this tablet (the rom is in zip format ...not in tar.md5 format) there is no pc based software(such as odin for samsung) for this Tab to flash the firmware.. the only way to flash that firmware with the stock recovery......i want to do some experiments with my tab(i.e installing custom recovery,custom rom etc.)......so before installing cwm i wanna backup/restore the stock recovery..(as it is under warranty period)....(the stock recovery works only with stock firmware..it doesn't work with any signed .zip file except the stock one ).....now what should i do????????

Biswajyoti said:
Actually I have a rooted HCL ME Y3 tablet.....and also have the stock rom for this tablet (the rom is in zip format ...not in tar.md5 format) there is no pc based software(such as odin for samsung) for this Tab to flash the firmware.. the only way to flash that firmware with the stock recovery......i want to do some experiments with my tab(i.e installing custom recovery,custom rom etc.)......so before installing cwm i wanna backup/restore the stock recovery..(as it is under warranty period)....(the stock recovery works only with stock firmware..it doesn't work with any signed .zip file except the stock one ).....now what should i do????????
Click to expand...
Click to collapse
try a full backup with titanium backup but i am not sure if it save the recovery too
write me a pm if you find a solution :good:

AXD96 said:
try a full backup with titanium backup but i am not sure if it save the recovery too
write me a pm if you find a solution :good:
Click to expand...
Click to collapse
No bro.
We can save Recovery.
Even with Titanium Backup Pro, doesn't gives this Option to backup Recovery. ..
We just need to flash the recovery. .
To change it.
Hit Thanks Button
----------Signature---------
Need Some Cool Guides Visit Hmpshah Guides

Zeuscluts said:
No bro.
We can save Recovery.
Even with Titanium Backup Pro, doesn't gives this Option to backup Recovery. ..
We just need to flash the recovery. .
To change it.
Hit Thanks Button
----------Signature---------
Need Some Cool Guides Visit Hmpshah Guides
Click to expand...
Click to collapse
do you know the actual path of the file recovery.img file???

Biswajyoti said:
do you know the actual path of the file recovery.img file???
Click to expand...
Click to collapse
If I am not wrong its a Complete different Partition.
----------Signature---------
Need Some Cool Guides Visit Hmpshah Guides

bricked MT7 09 ----PLS HELP-----SOLVED

I was on B510 rom then tried to flash twrp of the same . now the mobile is bricked . no acces to stock recovery and the
3 button update method is also not appearing
have tried flashing through adb almost all stock and custom recoveries without any success.
Only recovery working is the TWRP for B510 that too is not possible to flash any recovery flashable rom zip files ( Kangvip rom ).
Please somebody help me to get rid of this boot stuck...Thanks.

im facing a similar situation. i hope someone helps.

mpt123 said:
I was on B510 rom then tried to flash twrp of the same . now the mobile is bricked . no acces to stock recovery and the
3 button update method is also not appearing
have tried flashing through adb almost all stock and custom recoveries without any success.
Only recovery working is the TWRP for B510 that too is not possible to flash any recovery flashable rom zip files ( Kangvip rom ).
Please somebody help me to get rid of this boot stuck...Thanks.
Click to expand...
Click to collapse
I am experiencing exactly the same issue.
Upgrade to B510 worked (it booted) but after installation of TWRP for MM the phone got into an bootloop. TWRP 2.8.7.0_6 is the only recovery which is able to start, it is impossible to get any older ones to start up. The stock recovery image from B510 is the only stock recovery which is able to start up, also it is possible to force the update for UPDATE.APP s on the internal memory, unfortunately there is no package avaiable which does not fail to install, as there are just partial updates for 6.0 and no full package and all other full packages are 5.1 or less. The downgrade B510-B354 seems to expect system files from B510 and as i got KangvipB354v2A flashed, those are not available. Also my nandroid backup from 5.1.1 won't boot up (does 6.0 expect an other kernel in the boot.img, was the bootloader changed during the update to 6.0?).
So we definitely need to get either one of those files to get our phones working again:
1. boot.img, cust.img and system.img (we've already got recovery.img)
2. or a complete nandroid backup of a working B510
3. or a full version UPDATE.APP of any MM rom
I would really appreciate if someone with a working B510 could provide one of these!

Hiemes said:
I am experiencing exactly the same issue.
Upgrade to B510 worked (it booted) but after installation of TWRP for MM the phone got into an bootloop. TWRP 2.8.7.0_6 is the only recovery which is able to start, it is impossible to get any older ones to start up. The stock recovery image from B510 is the only stock recovery which is able to start up, also it is possible to force the update for UPDATE.APP s on the internal memory, unfortunately there is no package avaiable which does not fail to install, as there are just partial updates for 6.0 and no full package and all other full packages are 5.1 or less. The downgrade B510-B354 seems to expect system files from B510 and as i got KangvipB354v2A flashed, those are not available. Also my nandroid backup from 5.1.1 won't boot up (does 6.0 expect an other kernel in the boot.img, was the bootloader changed during the update to 6.0?).
So we definitely need to get either one of those files to get our phones working again:
1. boot.img, cust.img and system.img (we've already got recovery.img)
2. or a complete nandroid backup of a working B510
3. or a full version UPDATE.APP of any MM rom
I would really appreciate if someone with a working B510 could provide one of these!
Click to expand...
Click to collapse
Full version of rom is not yet available.....i have been searching for that for the past two days.
The possible solution at the moment is to get back up from TWRP RUNNING b510 .
Lets wait and see for some help.

how complete nandroid backup of a working B510?may i choose sdcard which backupfiles on it?

steps to reveive M7
is
demirozu69 said:
how complete nandroid backup of a working B510?may i choose sdcard which backupfiles on it?
Click to expand...
Click to collapse
finally my mate 7 l09 is back with the help from @khalid mgahed
Please follow the below steps to revive your M7.
1. install recovery from the below link( thanks to @mobopx)
http://forum.xda-developers.com/mat...9-mt7-tl10-t3286910/post64734830#post64734830.
2.Download the TWRP backup of B510 back up from the below link(thanks to @ Fooox1)
https://mega.nz/#F!PN8GGYRS!-kpPxKm5eliQvs2fCfCWCA
Unzip the file and save it to backups folder in sdcard
3. Wipe data cache system internal from TWRP
3. Go to TWRP recovery and restore from the back up saved path.
thats it ...M7 will start with B510 rom.

mpt123 said:
is
finally my mate 7 l09 is back with the help from @khalid mgahed
Please follow the below steps to revive your M7.
1. install recovery from the below link( thanks to @mobopx)
http://forum.xda-developers.com/mat...9-mt7-tl10-t3286910/post64734830#post64734830.
2.Download the TWRP backup of B510 back up from the below link(thanks to @ Fooox1)
https://mega.nz/#F!PN8GGYRS!-kpPxKm5eliQvs2fCfCWCA
Unzip the file and save it to backups folder in sdcard
3. Wipe data cache system internal from TWRP
3. Go to TWRP recovery and restore from the back up saved path.
thats it ...M7 will start with B510 rom.
Click to expand...
Click to collapse
its all him @Fooox1 ,, i done no thing

I updated this tool just , I added stock recovery for MM .
https://mega.nz/#!llQWQD6S!a0JOjS1ZmCT1aSggvCPYb7lhkPimYtVhja-Mv0qk7DY
in one free time, I'll make english version

@mobopx:
im currently on B328 and want to go back to cm11. i have cwm backups form a previous install. can i use your tool to just install cwm and flash my backups?

cm11 is Kitkat?

mobopx said:
cm11 is Kitkat?
Click to expand...
Click to collapse
yes it is. thank you for your great tool btw.

I not tested cwm, because i never had KK on my phone.
It seems to me that if you have LP and install recovery KK , it can be a problem.
Look at xda how to make roolback LP - > KK , then if you already have ori KK, install CWM for KK and restore previous copies .
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
or try this: http://www.carbontesla.com/2015/07/how-to-downgrade-ascend-mate-7-to-kitkat-firmware/

mobopx said:
I not tested cwm, because i never had KK on my phone.
It seems to me that if you have LP and install recovery KK , it can be a problem.
Look at xda how to make roolback LP - > KK , then if you already have ori KK, install CWM for KK and restore previous copies .
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
or try this: http://www.carbontesla.com/2015/07/how-to-downgrade-ascend-mate-7-to-kitkat-firmware/
Click to expand...
Click to collapse
your epic! thanks for the help! i will try later tonight. your help has been greatly appreciated!

Bricked
mpt123 said:
is
finally my mate 7 l09 is back with the help from @khalid mgahed
Please follow the below steps to revive your M7.
1. install recovery from the below link( thanks to @mobopx)
http://forum.xda-developers.com/mat...9-mt7-tl10-t3286910/post64734830#post64734830.
2.Download the TWRP backup of B510 back up from the below link(thanks to @ Fooox1)
https://mega.nz/#F!PN8GGYRS!-kpPxKm5eliQvs2fCfCWCA
Unzip the file and save it to backups folder in sdcard
3. Wipe data cache system internal from TWRP
3. Go to TWRP recovery and restore from the back up saved path.
thats it ...M7 will start with B510 rom.
Click to expand...
Click to collapse
If I try the mobopx tool it says, "device not found", but write successful.
in the link for step 2 there is a link to 9 files that can be downloaded individually or zipped.
If you try to install the zip file it fails, if you put the zip in the twrp backup folder, twrp doesn't see it, if you put the files individually in the twrp backup folder, twrp doesn't see them. If you create a file called back-ups in the external sd card, same results.
Please tell me what I am doing wrong.
Thank You.

fooshack said:
If I try the mobopx tool it says, "device not found", but write successful.
in the link for step 2 there is a link to 9 files that can be downloaded individually or zipped.
If you try to install the zip file it fails, if you put the zip in the twrp backup folder, twrp doesn't see it, if you put the files individually in the twrp backup folder, twrp doesn't see them. If you create a file called back-ups in the external sd card, same results.
Please tell me what I am doing wrong.
Thank You.
Click to expand...
Click to collapse
from the step 2 download as zip file extract it then copy folder as in the attached screenshot and pt it in the twrp back up folder in the same folder(if no folder hen take a back p from twrp it will create the folder ), once the folder is copied then go to restore of twrp should see the back up to restore...good luck

TWRP
mpt123 said:
is
finally my mate 7 l09 is back with the help from @khalid mgahed
Please follow the below steps to revive your M7.
1. install recovery from the below link( thanks to @mobopx)
http://forum.xda-developers.com/mat...9-mt7-tl10-t3286910/post64734830#post64734830.
2.Download the TWRP backup of B510 back up from the below link(thanks to @ Fooox1)
https://mega.nz/#F!PN8GGYRS!-kpPxKm5eliQvs2fCfCWCA
Unzip the file and save it to backups folder in sdcard
3. Wipe data cache system internal from TWRP
3. Go to TWRP recovery and restore from the back up saved path.
thats it ...M7 will start with B510 rom.
Click to expand...
Click to collapse
mpt123 said:
from the step 2 download as zip file extract it then copy folder as in the attached screenshot and pt it in the twrp back up folder in the same folder(if no folder hen take a back p from twrp it will create the folder ), once the folder is copied then go to restore of twrp should see the back up to restore...good luck
Click to expand...
Click to collapse
I really appreciate your help.
Which version of TWRP is that? I am unable to use the mobopx tool to flash any backup.
The file flashed fine, but now I am in a boot loop. I am in the US if that matters.
Thank you.

fooshack said:
I really appreciate your help.
Which version of TWRP is that? I am unable to use the mobopx tool to flash any backup.
The file flashed fine, but now I am in a boot loop. I am in the US if that matters.
Thank you.
Click to expand...
Click to collapse
TWRP 2.8.7.0 for MM
if the mobo tool not working then try to flash it using fastboot, any one of this method should work,for me the fastboot flashing of twrp didnt work ,i used mobo tool.
If the issue repeats then try doing it from different pc it should definitely work.
try and let me know.
link for twrp
https://app.box.com/s/fp6hj6xqv484kie0uknmayt2yyp4vtpv

fooshack said:
I really appreciate your help.
Which version of TWRP is that? I am unable to use the mobopx tool to flash any backup.
The file flashed fine, but now I am in a boot loop. I am in the US if that matters.
Thank you.
Click to expand...
Click to collapse
mpt123 said:
TWRP 2.8.7.0 for MM
if the mobo tool not working then try to flash it using fastboot, any one of this method should work,for me the fastboot flashing of twrp didnt work ,i used mobo tool.
If the issue repeats then try doing it from different pc it should definitely work.
try and let me know.
link for twrp
https://app.box.com/s/fp6hj6xqv484kie0uknmayt2yyp4vtpv
Click to expand...
Click to collapse
I finally got it working flashing another backup file over the one in this thread. But I am still having a few problems.....My internal memory is only showing 3.85GB total....I think my other system is still somehow installed or there are residual files I can't see.
WIFI and Bluetooth don't work.
Any Ideas?
Thanks

fooshack said:
I finally got it working flashing another backup file over the one in this thread. But I am still having a few problems.....My internal memory is only showing 3.85GB total....I think my other system is still somehow installed or there are residual files I can't see.
WIFI and Bluetooth don't work.
Any Ideas?
Thanks
Click to expand...
Click to collapse
Good that its back.....try formating device or reseting from twrp and check the space.
did u restored all files ,everything is working from this back up.
No issues for me on this rom

Work but now i have some written in chinese but any solution?
Ciao

FIXED Clean Nandroid BackUp Marschmallow B520+Updateb520+UpdateB521

Use as always at your own risk!
1. Flash My only twrp here:
https://mega.nz/#!c5BjnSBC!Gu_tqeZgDkgSj31i57d3ntvS65dxqif2YdzkFAqCw90
2. Unpack twrp.zip and copy folder to Sd here:
https://mega.nz/#!51wSRJ7A!UZ1SVICgmseqLJzzGxd1dlQox6iSWHbr2oWKYKG3uXI
3. Reboot to recovery
4. Restore My BackUp in Twrp.
5. Restar a Huawei logo will screen about 15 minutes.
6. Good Luck
1. Flash stock recovery. here
https://mega.nz/#!1l512Soa!zu1cf4t3973SdmWkaAbOq8SYxDX90H60SRHynZvmmSI
Instal Update B520 I do not know why but necessary . here
https://mega.nz/#!g0IDHBAL!iG0PIYU_-BqahHjypxbDDZ83k3THLyRqH0ethrFXdE4
Instal Update B521:
Copy update.zip to Dload in SD. here
https://mega.nz/#!5hYQlBKA!trchgPcAluqpMcduX0A8sI69fsoGH1dYYko32cKLARs
Instal local update
Good Luck

hi, this is the same twrp recovery as in the first post?
http://forum.xda-developers.com/mate-7/development/beta-b510-android-6-0-mt7-l09-mt7-tl10-t3286910

albert-so758 said:
Use as always at your own risk!
1. Flash My only twrp here:
https://mega.nz/#!c5BjnSBC!Gu_tqeZgDkgSj31i57d3ntvS65dxqif2YdzkFAqCw90
2. Unpack twrp.zip and copy folder to Sd here:
https://mega.nz/#!w5xHxRgL!a9qHT9NXhJI1MLAtavhvciSeCy4rDM7ylKCObjPbBdU
3. Reboot to recovery
4. Restore My BackUp in Twrp.
5. Restar a Huawei logo will screen about 15 minutes.
6. Good Luck
Click to expand...
Click to collapse
Hi
Before I try and make something bad...is this for TL10 or TL9 model?
Thanks for the post

Tl10 a Tl09

mobopx said:
hi, this is the same twrp recovery as in the first post?
http://forum.xda-developers.com/mate-7/development/beta-b510-android-6-0-mt7-l09-mt7-tl10-t3286910
Click to expand...
Click to collapse
No

albert-so758 said:
Tl10 a Tl09
Click to expand...
Click to collapse
Good
Many thanks

Can I flash this over a Lollipop Rom? Like B331? I mean with Lollipop TWRP

I TRIED IT FOR 24 HOURS ..
i think it clean beautiful version ..
battery life is the same as B510 ..
it fixes ram management in B510 all time there are at least 1.5 gb of ram ...
the B520 , B510 is scoring 53000+ in antutu .. the same as lollipop B326 ..
BUT i think there are common problem in both B510, B520..
1-there is aggressive app closing and I have no idea why that is happening !!
2-youtube app is very laggy and sloow !!
3-facebook is have huge frame drop .. and have problem with launching messenger from inside it !!

I tried install onto my l09 with the correct twrp but no luck just sits on the first Huawei logo been there now 25mins.

khalid mgahed said:
I TRIED IT FOR 24 HOURS ..
i think it clean beautiful version ..
battery life is the same as B510 ..
it fixes ram management in B510 all time there are at least 1.5 gb of ram ...
the B520 , B510 is scoring 53000+ in antutu .. the same as lollipop B326 ..
BUT i think there are common problem in both B510, B520..
1-there is aggressive app closing and I have no idea why that is happening !!
2-youtube app is very laggy and sloow !!
3-facebook is have some much frame drob .. and have problem with launching messenger from inside it !!
Click to expand...
Click to collapse
Try to disable with root the phone manager ..
Enviado do meu JAZZ através de Tapatalk

albert-so758 said:
Use as always at your own risk!
1. Flash My only twrp here:
https://mega.nz/#!c5BjnSBC!Gu_tqeZgDkgSj31i57d3ntvS65dxqif2YdzkFAqCw90
2. Unpack twrp.zip and copy folder to Sd here:
https://mega.nz/#!w5xHxRgL!a9qHT9NXhJI1MLAtavhvciSeCy4rDM7ylKCObjPbBdU
3. Reboot to recovery
4. Restore My BackUp in Twrp.
5. Restar a Huawei logo will screen about 15 minutes.
6. Good Luck
Instal Update B521:
1. Flash stock recovery. here
https://mega.nz/#!1l512Soa!zu1cf4t3973SdmWkaAbOq8SYxDX90H60SRHynZvmmSI
Copy update.zip to Dload in SD. here
https://mega.nz/#!5hYQlBKA!trchgPcAluqpMcduX0A8sI69fsoGH1dYYko32cKLARs
Instal local update
Good Luck
Click to expand...
Click to collapse
update to B521 failed at 23% ..
removed root ..
i flashed B520 stock recovery ..
put update.zip in sdcard in dload folder it start and in 23% stops and update faild ?
any ideas bro ?

Can I install the update on B510?

You have to change the serial number on the folder
albert-so758 said:
Use as always at your own risk!
1. Flash My only twrp here:
https://mega.nz/#!c5BjnSBC!Gu_tqeZgDkgSj31i57d3ntvS65dxqif2YdzkFAqCw90
2. Unpack twrp.zip and copy folder to Sd here:
https://mega.nz/#!w5xHxRgL!a9qHT9NXhJI1MLAtavhvciSeCy4rDM7ylKCObjPbBdU
3. Reboot to recovery
4. Restore My BackUp in Twrp.
5. Restar a Huawei logo will screen about 15 minutes.
6. Good Luck
Instal Update B521:
1. Flash stock recovery. here
https://mega.nz/#!1l512Soa!zu1cf4t3973SdmWkaAbOq8SYxDX90H60SRHynZvmmSI
Copy update.zip to Dload in SD. here
https://mega.nz/#!5hYQlBKA!trchgPcAluqpMcduX0A8sI69fsoGH1dYYko32cKLARs
Instal local update
Good Luck
Click to expand...
Click to collapse

To what
Sent from my JAZZ using Tapatalk

paulopais said:
You have to change the serial number on the folder
Click to expand...
Click to collapse
thank you man

error
E:extractTarFork() process ended with ERROR=255

Can this be flashed over 4.4.2 ?

Marconicosax said:
Can I install the update on B510?
Click to expand...
Click to collapse
no
---------- Post added at 06:31 PM ---------- Previous post was at 06:31 PM ----------
sachinwadhwa46 said:
Can this be flashed over 4.4.2 ?
Click to expand...
Click to collapse
no

bategool said:
error
E:extractTarFork() process ended with ERROR=255
Click to expand...
Click to collapse
must be B510

thank you very much!
i used your backup unbricked my phone, I was desperate, thank you thank you thank you!

Note 7 rom for j7t

What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:

Ctrterrell said:
What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:
Click to expand...
Click to collapse
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.

Metabolic12 said:
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.
Click to expand...
Click to collapse
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2

Ctrterrell said:
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2
Click to expand...
Click to collapse
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/H and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.

Metabolic12 said:
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/G and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.
Click to expand...
Click to collapse
OK thanks for your help ima try it now and see what happens and let you know

Ctrterrell said:
OK thanks for your help ima try it now and see what happens and let you know
Click to expand...
Click to collapse
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.

Metabolic12 said:
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.
Click to expand...
Click to collapse
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail

Ctrterrell said:
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail
Click to expand...
Click to collapse
Give me your step by step and I'll see if I can help you.

Well I wipe the data system and cache before I installed the rom then afterwards I installed it then I flashed the kernel and it said something bout permission was removed since it couldn't be installed but I will take a pic from my tablet real fast to show you what I was talking about

Metabolic12 said:
Give me your step by step and I'll see if I can help you.
Click to expand...
Click to collapse
This

I forgot to use Odin lol mybad

Ctrterrell said:
This
Click to expand...
Click to collapse
Try this. Take your external SD card and put it in your tablet. Go to Messi's thread for the max kernel in J7T development and download the boot.img not the boot.tar.md5. Finish the download then extract the zip in your external SD card. Put your SD card in your phone, boot into TWRP. Now mount system, cache, art/dalvik, data and internal storage (you may need to format data to access data) now wipe them. Don't wipe your external SD card, so make sure it's not mounted in TWRP. After the wipe mount your external SD, flash the rom, then flash boot.img and tick Boot not recovery before the flash. Reboot and wait. Let me know if it helped man.
---------- Post added at 08:39 PM ---------- Previous post was at 08:19 PM ----------
Ctrterrell said:
I forgot to use Odin lol mybad
Click to expand...
Click to collapse
If you download the boot.img you won't need Odin. But I prefer flashing tars personally, your choice. It should boot for you bro.

Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2

Ctrterrell said:
Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2
Click to expand...
Click to collapse
Glad you got it bro and no the Wi-Fi doesn't work on any of the 3 versions.

Yeah thanks for everu8amd what else roms have you tried and will I have to always flash that kernel when I try to install a roms on this phone or was that only for the note roms

Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
And Reboot I reboot to recovery and advance wipe click dalvic and cliche

mario1634 said:
Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
Click to expand...
Click to collapse
Ok ima give it a try In few and see what happens

Have anybody figure out a fix for the camera

mario1634 said:
Have anybody figure out a fix for the camera
Click to expand...
Click to collapse
That's what I was about to ask next I know I was still having problems even when I tried to send a pic it still Would reboot

I'm trying to figure it out now if I get it working I will tell you I get it to stop reboot ever time and now it just force close