SO i just got Gensoid, and i have been looking to find the answer to this question.
Is it possible to use save states from my Sega PC emulator on the gensoid?
and if so, where are the save states located on the phone?
Because i would like to use the game genie on the my PC to mod a save and them use it on my phone.
More then likely the save states are in the same directory as the game roms and your plan may be possible as long as the file extensions are the same
Sent from my SGH-959 *EXPLOSION*
/face palm
I guess I'll try the save state from my PC tonight. Thank you.
I'm trying to figure out a way to save my roms into a dropbox folder so I can easily access them from my computer to play with a 360 controller on my tv. I guess the first question is: would saves states from different emulators work together.
I think tasker would be the best way, and I tried setting something up, but couldn't figure out a good way to really automate it. There isn't an option in the emulators to change the save game location.
By default all of the saves (using save states - I don't use in game saves) go in sdcard/roms/nes or snes or genesis with the name of the file as *game title*.ss1 .ss2 .ss3 (different slots).
I think the best way would be to set up the following in tasker. On nesoid launch/snesoid launch/genesis launch, copy .ssx files from dropbox/nes-genesis-snes to their respective folders on the sdcard. Then, on closing an emulator on the phone, copying from the sdcard to dropbox.
If somebody could help me with this, I would really appreciate it.
Morning!
I am a casual GBA player, and I have played some games on my laptop on VBA. I decided it was time I passed them to my Android device and tried them on Gameboid. To do such, I istalled the app, configured the BIOS, and copied both the .gba and the .sav file.
Gameboid loads the ROM and savefile just fine. However, when I try to save (manually; not via savestate), it doesn't work. The savefile is not overwriten, and if I reset gameboid I will be at the same point I was when I passed the files from my laptop to my phone.
I know I could work around this with savestates, but there are some things I'd really prefer the in-game save states to do.
Thanks for the help,
Blues003
Yes, I have the same problem. I have a 128kb save file for a game. Gameboid reads the file perfectly; however, when I attempt to save my game manually (in-game save), the game always fails to save. All the save files that I create using Gameboid are 32kb, unlike all my previously created files which are all 128kb. I have tried changing the GBA save type setting but to no avail. Any help would be really appreciated! Thanks!
I have some ideas, look that: I have a emulator on my droid. Wich use .sav 128kb my emulator on my pc use .sav 64kb. The question here my dearly developers is... We need emulators wich use the same .sav, maybe must be a emulator that use .sav 128kb if somebody find any type of solution pleas help me or bether, help us sorry about my english i learnd listening music in my home (@rael2000ix) from Brasil ,,, i just waiting for one developer that can make it thanks i m d go.
Hey everyone. I was playing some games on VBA (gameboy advance emulator) on my PC. About halfway through the game I saved the game (.sav file) and transferred it to my Xperia Play so I could continue on gameboid.
The import worked great and I was able to play while traveling. Problem is now I want to switch back to the PC and gameboid wont save my game (battery save) - it will only save using a save state.
I cant find any way to load the save state in any emulators on the PC. I read on a couple places that you couldnt battery save using the lite version of gameboid. So I checked to see if I downloaded the wrong one. Looks like I didnt - Gameboid 2.4.7. I obtained it via a QR code from the developer's site since it isnt on the marketplace anymore.
Any ideas here?
Fix
I had a similar issue using an emulator as well. It happens when you try to use a save from a different device. I found out that you need to fix the permissions if you do this. Basically it works like this:
- [Device One] You install the emulator, load a rom, and save your data.
- Copy the .sav to [Device Two] load a rom, then save OVER that .sav
- Copy the .sav BACK to [Device One] load rom, load save (works fine) but overwriting doesn't work.
when this happens you need to set the permissions of the .sav, and of the folders that contain it and it will work fine again.
Hope this helps.
Hi all, as you may see by my info, I am a new forumer. I have been stumped on this question the last few days though. How would I trade Pokemon from the Gameboid emulator. So I come across tutorials teaching one how to trade, but it never seems to work for me. I would like to know how to at least convert my .sav file to work for vba link or TGB Dual. Thanks for any answers.
I would also like to know how to do that, has anyone been fortunate to convert a gameboid file into a format where the file can be played on the PC?
Please answer.
Hi guys!
Converting the Gameboid file to work on the VBA emulator is quite (very) simple.
@Firefrazed : I'm not sure about the TGB Dual emu, but I'm guessing it's similar to VBA in terms of where the sav files are placed.
1. Save the Pokemon Game in-game, as in Select>Save.
2. Go to My Files in your phone (phone SD Card directory, I'm assuming its there) and search in the Gameboid folder for the XXXXX.sav file (with the XXXXX being the name of your game.
3. Use bluetooth or some SD card reader to copy and transfer this file to your PC.
4. In your PC, navigate to "Battery Saves" (for VBA).
5. Replace the current XXXXX.sav file with the one you obtained from your phone, or if you haven't save a game on the VBA yet, ignore this step and just paste your phone's XXXXX.sav in the "Battery Saves" folder.
As for the VBA-Link issue, have you checked this out yet? http://www.youtube.com/watch?v=QnZusVRiDfk
And you're done! Hope this helped!
Cheers!
Cheers, zephyrsurreal.
I never actually thought about using Battery saves.
hi there! i have a similar problem, so i thougt i post it here:
i have been using the gameboid emulator to play pokemon (ahh childhood memories ). but the problem is: i put the rom into a dropbox folder, so everytime i navigated to the dropbbox folder, clicked on the rom (its a .zip file) and chose open with gameboid. i save the game via gameboid.
now i want to trade pokemon, so i needed the save game to transfer it on my pc. but the problem: there is no save game in the dropbox folder and there is also no folder on the sd card that would have the save game in it.
i tried saving the game in game, this generated a .sav file in the folder on my sd card (where the gameboid bios file is) but when i use this save game its not working on the pc emulator (using VBA).
i think this has something to do with playing out of dropbox... any help would be greatly appeciated...
ps: i also tried to import the .sav file via battery save, but i did not work, it loaded correctly but it started the game, as there was no savegame at all (right from the beginning)
Hi there Sir Schwanzelot!!!
I just read and i thik you can resolve the problem with this:
type-Flash (128KB) then on VBA i go to Options-Emulator-Save type-Flash 128 KB then go to File-Import-and click on the file your phone made with your saved game and it will usually say something like the internal battery is dry but should still load your game.
I had the same problem, and with that...i resolve it .
I hope it works to you...
Bump
So I'm playing Leaf Green and Fire Red. I managed to trade my Ivysaur from Leaf Green to my Fire Red save. How do I get that save to work on my phone because VBA saves it as a different file I do believe so Gameboid doesn't find it.
Thanks guys, these have been really helpful. However, I still not have gotten this to work. I set Gameboid to save at Flash 128K and set VBA to do the same. I take the .sav file from the sd card on my phone and copy it over to my PC (I don't see a battery saves file anywhere so I put it in the same folder the .GBA file is in). I go to import it as a battery file and it says "Importing a snapshot file will erase any saved games and reset the emulator. Are you sure you want to continue?" I hit yes and it loads the game up from the start. Any help would be greatly appreciated.
I have a problem too. I've never had this problem before, but my Gameboid battery save file is being stubborn and staying at 32K. I do the usual thing of saving in the game while the emulator settings are at Flash 128K, but the battery save file is at 32K which doesn't allow me to use it on VBA at all. I've tried using other save types on Gameboid such as SRAM and Automatic and all the other save type options it gives, but the battery save file is always stuck at 32K. Even still, I hoped and tried every single type of save file option on Gameboid with VBA. I tried importing the battery save on VBA with every single save type option that it gives. There was no way for me to open the 32K battery save file. So can someone help me figure out how to make a battery save that's 64K or 128K?? It would be greatly appreciated.
The game I'm trying to save at 64K or 128K is Megaman Battle Network 6: Cybeast Gregar. I don't use cheats or anything. I'm simply playing the game and hoping that there's a way to make it save in the game like any other normal game I've played. At least the ones that allowed me to make battery saves that is..
Silvermoon1k said:
I have a problem too. I've never had this problem before, but my Gameboid battery save file is being stubborn and staying at 32K. I do the usual thing of saving in the game while the emulator settings are at Flash 128K, but the battery save file is at 32K which doesn't allow me to use it on VBA at all. I've tried using other save types on Gameboid such as SRAM and Automatic and all the other save type options it gives, but the battery save file is always stuck at 32K. Even still, I hoped and tried every single type of save file option on Gameboid with VBA. I tried importing the battery save on VBA with every single save type option that it gives. There was no way for me to open the 32K battery save file. So can someone help me figure out how to make a battery save that's 64K or 128K?? It would be greatly appreciated.
The game I'm trying to save at 64K or 128K is Megaman Battle Network 6: Cybeast Gregar. I don't use cheats or anything. I'm simply playing the game and hoping that there's a way to make it save in the game like any other normal game I've played. At least the ones that allowed me to make battery saves that is..
Click to expand...
Click to collapse
I have played pokemon on vba on pc and would like to play with the same save on android. how can I do it?
Suarezian said:
I have played pokemon on vba on pc and would like to play with the same save on android. how can I do it?
Click to expand...
Click to collapse
Same problem here. I wasn't to move my VBA save from PC to gameboid and wise versa. It doesn't work. I checked. Gameboid says file is corrupted and was deleted.
ibex333 said:
Same problem here. I wasn't to move my VBA save from PC to gameboid and wise versa. It doesn't work. I checked. Gameboid says file is corrupted and was deleted.
Click to expand...
Click to collapse
haha dude. u are replying to a 6 months earlier post. anyways, i got it to work!
More questions on Gameboid to VBA combatability
Suarezian said:
haha dude. u are replying to a 6 months earlier post. anyways, i got it to work!
Click to expand...
Click to collapse
Ok. How did you get it to work?
---------- Post added at 08:15 PM ---------- Previous post was at 07:59 PM ----------
Brettbesa said:
Thanks guys, these have been really helpful. However, I still not have gotten this to work. I set Gameboid to save at Flash 128K and set VBA to do the same. I take the .sav file from the sd card on my phone and copy it over to my PC (I don't see a battery saves file anywhere so I put it in the same folder the .GBA file is in). I go to import it as a battery file and it says "Importing a snapshot file will erase any saved games and reset the emulator. Are you sure you want to continue?" I hit yes and it loads the game up from the start. Any help would be greatly appreciated.
Click to expand...
Click to collapse
This describes my issue and troubleshooting steps exactly. Although I would like to clarify: "I hit yes and it BEGINS the game from the start (as in the very beginning opening scene and button descriptions".
---------- Post added at 08:28 PM ---------- Previous post was at 08:15 PM ----------
Voltron1 said:
Ok. How did you get it to work?
---------- Post added at 08:15 PM ---------- Previous post was at 07:59 PM ----------
This describes my issue and troubleshooting steps exactly. Although I would like to clarify: "I hit yes and it BEGINS the game from the start (as in the very beginning opening scene and button descriptions".
Click to expand...
Click to collapse
And update to anyone else who comes along. I solved my issues of GameBoid Advance to VBA by using VBA 1.72 instead of 1.8. I haven't gotten to actually trading anything yet. But now at least my save file from GBA (on my android phone) loads on VBA (on my PC).
Unless I post more, assume the trading worked as well.