[DEV] [RK30SDK/RK3066] Zedupad - ischool - Miscellaneous Android Development

Hi All,
Ive been looking at a RK30SDK based device, namely the zedupad, a cheap low cost teaching based android tablet for africa,
www.zedupad.com
This section is my documentation for the device
rktool info
Code:
Loading partition information
MACHINE_MODEL:rk30sdk
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](backup),[email protected](cache),[email protected](userdata),[email protected](kpanic),[email protected](system),[email protected](user)
Original DMESG
attached
more info to follow

Related

Galaxy "Y" vs. "Fit" comparison: GT-S5670 <--> GT-S5630

☆.☆ R & D thread ☆.☆
it seems that these two models are very similar.
Galaxy Y uses bcm21553 processor on totoro board.
partition information file is "totoro_0623.pit"
it would be interesting to discuss, which software is interchangeable among the two phones.
please post a dmesg output of CM Kernel system for comparison purposes.
http://forum.xda-developers.com/forumdisplay.php?f=1472
I really do appreciate the mod moving this post out of dev section, so it will escape the attention of most devs.
op. "IRON FIST" at it's best.
below is a dmesg from a Galaxy Y GT-S5360:
Linux version 2.6.35.7 ([email protected]) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-68) ) #38 PREEMPT Wed Mar 21 21:46:02 IST 2012
CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
Machine: BCM21553 ThunderbirdEDN31 platform
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 92672
Memory: 362MB = 362MB total
Memory: 295108k/295108k available, 75580k reserved, 0K highmem
Virtual kernel memory layout:
vector _: 0xffff0000 - 0xffff1000 ( 004 kB)
fixmap _: 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA ____: 0xff000000 - 0xffe00000 ( 014 MB)
vmalloc : 0xd7000000 - 0xf0000000 ( 400 MB)
lowmem _: 0xc0000000 - 0xd6a00000 ( 362 MB)
pkmap __: 0xbfe00000 - 0xc0000000 ( 002 MB)
modules : 0xbf000000 - 0xbfe00000 ( 014 MB)
.init __: 0xc0008000 - 0xc003f000 ( 220 kB)
.text __: 0xc003f000 - 0xc0627000 (6048 kB)
.data __: 0xc0692000 - 0xc07066a0 ( 466 kB)
http://forum.xda-developers.com/showpost.php?p=24637502&postcount=1
Hello Guys How Are you all,
when surfing and searching on the net, i found some phones that have the same board like the GALAXY Y GT-S5360 and this is the list :
--------------------------------THIS IS THE PHONES AT 833Mhz
Samsung GT-S5300 Galaxy Pocket : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-S5512 Galaxy Y Pro Duos : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-S6102 Galaxy Y Duos : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-S5360 Galaxy Y : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-B5510 Galaxy Y Pro / Galaxy Txt : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-S5570I Galaxy Pop/Mini : CPU: 32bit Broadcom BCM21553, 833MHz
Newest 3G Smart Mobile Phone T616 : CPU: 32bit Broadcom BCM21553, 833MHz
--------------------------------THE ONLY ONE THAT HAVE 1Ghz
Newest 3G smart mobile phone T968 : CPU: 32bit Broadcom BCM21553, 1GHz
------------------------------------------------------
Samsung Galaxy Hardware Infos :
Here is the part of this topic where i will post any new infos about Samsung Galaxy Y.
And the Great New is The Galaxy Y have the latest technology From Broadcom .
Graphics GPU :
High-Quality display support up to HVGA Full HD Support 1080p.
8 Megapixel JPEG Camera with mipi serial interface.
VGA Enc/Dec Up to 30 frames per second H.264, MPEG-4, H.263 & WMV9 Video.
The Latest Technology From Broadcom VideoCore (TM) 4 Best then NOKIA N8.
CPU : 60nm ARM11 (not v6) Compatible ARMv6 Based on ARM Cortex A9. OpenGL 2.0 Hardware Acceleration, Integrated App Processor.
CHIPSET :
PMU : BCM59035
HSPA : BCM21553
2G/3G HS Transceiver : BCM2091
OPTIONS :
NFC : BCM20791
GPS/GLONASS : BCM47511
Mobile WLAN/BT/FM : BCM4330
This page is edited by me and sources links included.
http://en.wikipedia.org/wiki/VideoCore
does nobody in here know which CPU you have ???? wow.
Our specs:
Processor:
-Qualcomm MSM7227 (600 MHz) Arm v6l
32 bit, CPU Core: ARM1136EJ-S
Cortex-A Series
now we know
OK now this rumour is falsified, which was spreading on XDA about SGY//Fit compatibility. will save some bother. ty

RK2918 Tab Odys-Loox rocks with Jelly Bean !

Oma JB v1.2.2 for evaluation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- system ext4
- CWM recovery
- homebrew kernel by Astralix & fr3ts0n
- CPU overclocked @1,1 GHz, CPU Tweaker to control
- externalSD mounted as NAND
- HDMI & Ethernet settings (v1.2.1) / Bluetooth settings (v1.2.2)
- latest hosts, su, su-binary, busybox
- autoupdate Flashplayer
- patched Google Play (no device restrictions), King Kong Market
- MX Video-Player, Play Music, Volume+
- Reboot Menue, HideStatusbar
- Goolge Chrome
- Google Apps (Currents, Google+, Play Books, Play Movies, Youtube)
- modded Google Maps (faster & world navigation activated)
- Stock & Nova Launcher
- Antutu 3D graphics = 950 [ICS = 600; Allwinner A10 = 1050]
download v1.2.2.a & BT kernel
download v1.2.1a
bug-fix OTG (for normal mount)
not working: camera pictures mirrored
- be aware: it is your own risk!
- decompress with 7zip
- copy attached fix to sd-card
- boot tab into flash mode
- run RK-Flashtool as admin: EraseIDB, tick Loader, Run
- first boot into CWM: install fix from sd-card, reboot
- wait 3-4 min
- have fun!
credits to: YuanDao, Astralix, fr3ts0n, netlars
GPL Sources
- Oma -
Compatibility and fixes >>> Part II
Odys Loox Specs:
- 7", 800*600 px
- LZ300MSF Resistive-Touch-Controller
- RTL8188 WLAN Adapter (Realtek)
- MMA8452 Acceleration Sensor (Freescale)
- OV7675 Front Camera (Omnivision)
- ALC5621 Multi-Channel-AudioCodec (Realtek)
- HYM8563 RTC Clock
- 4GB NAND-Flash (Hynix H27UBG8T2ATR)
- 2x 256MB DDR3-SD-Ram (Elixir N2C82G)
Forgotten Tabs Project:
- will also run on Approx Cheesecake, Newsmy-NP720, Pipo DS710 (OEM) (ForoTablets.com)
- maybe also run (pls place specific kernel in rockdev/Image) on ..... see verified/feedback received
- for tabs without volume-buttons: http://forum.xda-developers.com/showpost.php?p=32800249&postcount=107
- for tabs without volume-buttons CWM touch available now: http://forum.xda-developers.com/showpost.php?p=36618830&postcount=669
- for tabs failed to download database, build update.img: http://forum.xda-developers.com/showpost.php?p=36945421&postcount=696
- for tabs showing no akku information: http://forum.xda-developers.com/showpost.php?p=33615891&postcount=248
- check usb-driver: http://forum.xda-developers.com/showpost.php?p=35567298&postcount=509
- angry birds obsolescens: http://forum.xda-developers.com/showpost.php?p=36324701&postcount=642
- angry birds patch: http://forum.xda-developers.com/showpost.php?p=37497211&postcount=720
- patched versions of several Rovio games available via http://www.mytrinity.nl
- how to do a backup with CWM recovery: http://forum.xda-developers.com/showpost.php?p=43619010&postcount=904
- how to dump the firmware: http://forum.xda-developers.com/showpost.php?p=35298423&postcount=462
- how to unbrick a rk2918 tab: http://www.slatedroid.com/topic/19352-unbrick-a-t760/
- for tabs having problems to calibrate the touchscreen: http://crewrktablets.arctablet.com/?p=1824
Build in post #1 is the roll-out build. If you need support please use only that build.
You will find latest builds on our site: http://crewrktablets.arctablet.com/?p=1562
Some video instructions (thanks to mastermind278):
verified/feedback received 181:
.............................. Odys-Xpress, Meiying M11, Hyundai H700 GB, Pipo DS820 (OEM) (model fix)
.............................. Odys Neo X8, BQ Kepler 2, Nextbook Next 8p12SE, yifang M816HC (OEM) (model fix)
.............................. Odys Neo X7, BQ Pascal 2, Nextbook Next 7p12SE, Pearl Touchlet X5, Carrefour ct705, Slidepad NG708, yifang M712HC (OEM) (model fix)
.............................. Odys Next, Odys Loox-Plus, Approx Cheesecake capacitive, Newsmy Newpad T17, Eye Key Fusion FP710, Pipo DS710b (OEM) (model fix)
.............................. Mediacom M810C, Prestigio PMP5080B, Nextbook Next 8p, BQ Kepler, yifang M803C (OEM) (MMA7660 fix)
.............................. Cube U9GT2, Easypad 970, Visture V2, Yuandao N90, Cresta CTP888, Ricatech Tab10-6, WayteQ xTAB 100is, Viewpia TB-110, Tenket TKP 1004, Chuwi V9 (post #4 & #14)
.............................. Intex iTab, iTab 12T055, iTab 12T065, Newsmy P9, Kingcom Joypad C81, Xirion Excellent 8 ATP 7658, Cube U16GT (http://forum.xda-developers.com/showpost.php?p=32210331&postcount=69)
.............................. Arnova Child-Pad / Arnova 7d G3 (http://forum.xda-developers.com/showpost.php?p=32781185&postcount=102)
.............................. Arnova 10b G3 (http://www.arctablet.com/blog/featu...-firmware-android-4-1-jb-root-space-apps-pip/)
.............................. Arnova 7 G2 (http://forum.xda-developers.com/showpost.php?p=32422015&postcount=48)
.............................. Arnova 9 G3 (http://www.arctablet.com/blog/forum...oot-more-space-for-apps-and-pip-video-player/)
.............................. Arnova 8 G2, Wooky 2 (http://www.arctablet.com/blog/forum/arnova-8-g2/morkamodjb-v1-00-all-model-g2-and-g3/)
.............................. Odys-Q (model fix)
.............................. AirTab E71 (http://4pda.ru/forum/index.php?showtopic=359217)
.............................. Cube U18GTW 8GB (http://forum.xda-developers.com/showpost.php?p=32800637&postcount=108)
.............................. Odys Cosmo (model fix)
.............................. Odys Vision (model fix)
.............................. Odys One (model fix)
.............................. EasyPad Junior 4.0, Polaroid PTab7200 (http://forum.xda-developers.com/showpost.php?p=32262300&postcount=25)
.............................. YuanDao N80, DMTech 816HD (http://forum.xda-developers.com/showpost.php?p=33014026&postcount=127)
.............................. Teclast t760, Andypad Pro (http://forum.xda-developers.com/showpost.php?p=33014026&postcount=127)
.............................. Teclast A10, GoClever TAB R973, Ployer Momo 11, Wopad i9, Aoson M19, Aoson M12B, ViewSonic ViewPad 97a (http://forum.xda-developers.com/showpost.php?p=32903550&postcount=123)
.............................. Essential B Smart Tab 8001 (http://forum.xda-developers.com/showpost.php?p=33054518&postcount=128)
.............................. Prestigio PMP5080C Pro (http://forum.xda-developers.com/showpost.php?p=33077045&postcount=133 , http://forum.xda-developers.com/showthread.php?t=1903745&page=62)
.............................. YuanDao N12, Point of View ProTab 25 (http://forum.xda-developers.com/showpost.php?p=33300904&postcount=172)
.............................. Prestigio PMP5097C Pro, Efun M1005HD (http://forum.xda-developers.com/sho...ers.com/showpost.php?p=36366573&postcount=654)
.............................. TomTec Ultimate10 (3 diff. prod nr), Ultimate 10 ATP 7526, Ultimate 10 ATP 5659, Newsmy K97, Technaxx BigTab (http://forum.xda-developers.com/showpost.php?p=33342692&postcount=179)
.............................. TomTec Excellent 8 ATP 7483, Xirion Excellent 8, Technaxx TechTab, Meiying M10, Pipo DS803 (OEM) (http://forum.xda-developers.com/showpost.php?p=33334803&postcount=175)
.............................. Mediacom Smartpad 850i, Mediacom Smartpad 852i, Teclast P85a (http://forum.xda-developers.com/showpost.php?p=33385114&postcount=200)
.............................. Cube U18GT (http://forum.xda-developers.com/showpost.php?p=33721784&postcount=263)
.............................. Arnova 9G2 (http://forum.xda-developers.com/showpost.php?p=33722079&postcount=264)
.............................. Danew DSlide 970 http://forum.xda-developers.com/showpost.php?p=33766240&postcount=274)
.............................. Titan 7010B (http://forum.xda-developers.com/showpost.php?p=33888551&postcount=318)
.............................. Skyworth S7 (http://www.freaktab.com/printthread.php?t=1110&pp=20&page=3)
.............................. YuanDao N50
.............................. Advan Vandroid T2i, Nextbook 7p resistive (http://forum.xda-developers.com/showpost.php?p=33725519&postcount=266)
.............................. BQ Newton, BQ Livingstone (http://forum.xda-developers.com/showpost.php?p=33979495&postcount=336)
.............................. BQ Tesla http://translate.google.de/translat...p://www.htcmania.com/showthread.php?p=5494854)
.............................. 3Q RC710b (http://forum.xda-developers.com/showpost.php?p=33982434&postcount=337)
.............................. Craig 745d
.............................. DMTech 725H (http://forum.xda-developers.com/showpost.php?p=34253822&postcount=379)
.............................. Cube U18GT-H (http://forum.xda-developers.com/showpost.php?p=34254005&postcount=381)
.............................. Nextbook Next 7p12SE (http://forum.xda-developers.com/showpost.php?p=34266710&postcount=383)
.............................. Hyundai S800, Hyundai S800 16GB (http://forum.xda-developers.com/showpost.php?p=35184805&postcount=455)
.............................. Lenco TAB-831 (http://forum.xda-developers.com/showpost.php?p=35337990&postcount=466)
.............................. Hyundai H900, Meiying M11HD (http://forum.xda-developers.com/showpost.php?p=35444987&postcount=495)
.............................. Odys Xpress Pro (model fix)
.............................. Hi Livel HLV-T702 (http://forum.xda-developers.com/showpost.php?p=35568519&postcount=513)
.............................. Wolder miTab Sunset (http://forum.xda-developers.com/showpost.php?p=35587693&postcount=520)
.............................. Mediacom M715i, M720i (http://www.androidiani.com/forum/me...com-715-720-chipset-rk2918-versione-beta.html)
.............................. Acho C906 (http://forum.xda-developers.com/showpost.php?p=35604404&postcount=524)
.............................. Acho C905: 720F-MT, 720F-RS, 720C-RS (http://forum.xda-developers.com/showpost.php?p=35651180&postcount=544)
.............................. Arnova 8c G3 (http://www.arctablet.com/blog/forum...ndroid-4-1-1-jb-customizable-custom-firmware/)
.............................. Maxell MaxTab 8 (http://www.androidiani.com/forum/tu...e-4-01-versione-8-pollici-10.html#post2932938)
.............................. GoClever R93 (http://forum.android.com.pl/f506/jelly-bean-4-1-1-na-r93-229649/)
.............................. Technaxx BigTab (http://forum.xda-developers.com/showpost.php?p=35698801&tcount=552)
.............................. Aoson M19 (http://forum.xda-developers.com/showpost.php?p=35993576&postcount=591)
.............................. Shiru Hitomi 7 (http://forum.xda-developers.com/showpost.php?p=36194640&postcount=614)
.............................. Cresta CTP810, Cresta CTP888 (http://forum.xda-developers.com/showpost.php?p=35409865&postcount=487)
.............................. Shiru Samurai 7 (http://forum.xda-developers.com/showpost.php?p=36325056&postcount=643)
.............................. Arnova 7fG3 (http://forum.xda-developers.com/showpost.php?p=36459697&postcount=660)
.............................. Imito AM801 (http://forum.xda-developers.com/showpost.php?p=36610324&postcount=668&nocache=1)
.............................. Chuwi V9 (http://forum.xda-developers.com/showpost.php?p=36732084&postcount=688)
.............................. Newpad K10 (http://forum.xda-developers.com/showpost.php?p=36742294&postcount=690)
.............................. Newpad A1 (http://www.android-hilfe.de/odys-allgemein/299050-oma-rockt-viele-rk2918-geraete-16.html#post4942726)
.............................. Airtab M91 (http://forum.xda-developers.com/showpost.php?p=36945421&postcount=696)
.............................. Slidepad 704c (http://forum.xda-developers.com/showpost.php?p=36958136&postcount=697)
.............................. Airtab M81 (http://forum.xda-developers.com/showpost.php?p=36960507&postcount=698)
.............................. GoClever R74 (http://forum.xda-developers.com/showpost.php?p=36961268&postcount=699)
.............................. Craig CMD741D (http://forum.xda-developers.com/showpost.php?p=37000631&postcount=704)
.............................. MSI Enjoy 7 Plus (two hw-revisions) (http://forum.xda-developers.com/showpost.php?p=37156208&postcount=709)
.............................. Proscan PLT7035-B (http://forum.xda-developers.com/showpost.php?p=37178536&postcount=730)
.............................. Goclever R73 (BQ Pascal B23) (http://forum.xda-developers.com/showpost.php?p=37498502&postcount=721)
.............................. Intenso Tab 704 (http://forum.xda-developers.com/showpost.php?p=37498564&postcount=722)
.............................. Venstar V700H (Dixon V700H in South Africa) (http://forum.xda-developers.com/showpost.php?p=37498718&postcount=723)
.............................. AOC MW0711 (http://forum.xda-developers.com/showpost.php?p=37512245&postcount=724)
.............................. Aoson M12 (http://forum.xda-developers.com/showpost.php?p=37707674&postcount=731)
.............................. Polaroid Diamond 8 pouces (http://forum.xda-developers.com/showpost.php?p=37710472&postcount=732)
.............................. 8" Intenso Tab (http://www.android-hilfe.de/odys-allgemein/299050-oma-rockt-viele-rk2918-geraete-18.html#post5047455)
.............................. Advan Vandroid t6 (http://forum.xda-developers.com/showpost.php?p=37583560&postcount=729)
.............................. Alcatel One Touch T10 (http://forum.xda-developers.com/showpost.php?p=37906789&postcount=759)
.............................. Newpad T3 (http://forum.xda-developers.com/showpost.php?p=39892628&postcount=808)
.............................. Nextbook 9p (http://forum.xda-developers.com/showpost.php?p=39911619&postcount=810)
.............................. Iball Slide 6318i (http://forum.xda-developers.com/showpost.php?p=43518901&postcount=862)
.............................. Penta IC709C CTU & EUS (http://forum.xda-developers.com/showpost.php?p=43546198&postcount=870)
.............................. Airtab m791w (http://forum.xda-developers.com/showpost.php?p=43609741&postcount=893)
.............................. MSI Enjoy 10plus (http://forum.xda-developers.com/showpost.php?p=43628635&postcount=921)
.............................. Touchmate MID780, M-310 T (http://forum.xda-developers.com/showpost.php?p=43639215&postcount=934)
.............................. BiPad 9, BiPad 9.2 (http://forum.xda-developers.com/showpost.php?p=43756875&postcount=986)
.............................. Titan 7010A (http://forum.xda-developers.com/showpost.php?p=43985275&postcount=1015)
.............................. Lexibook MFC155FR (http://forum.xda-developers.com/showthread.php?t=1903745&page=104)
.............................. Maxell MaxTab C7 (http://forum.xda-developers.com/showpost.php?p=44356158&postcount=1036)
.............................. Turbo-X Spice II (http://forum.xda-developers.com/showpost.php?p=45821066&postcount=1077)
.............................. Intenso Tab704 (INM752HC) (http://forum.xda-developers.com/showpost.php?p=46128786&postcount=1105)
.............................. imito am801 (http://forum.xda-developers.com/showpost.php?p=46531001&postcount=1127)
.............................. iball slide6309i (http://forum.xda-developers.com/showpost.php?p=46680893&postcount=1156)
.............................. ENGAGE MT7002 HQ, Noontec A9 (http://www.arctablet.com/blog/forum/rk2918/rom-for-alcatel-one-touch-evo-7-ot-t70/#p32902)
.............................. Intracon FX2 pad (http://www.arctablet.com/blog/forum/rk2918/brauche-hilfe-bei-intracon-fx2-pad/#p28627)
.............................. DMTech 820 (http://forum.xda-developers.com/showpost.php?p=47700185&postcount=1186)
.............................. iJoy Andromeda (http://forum.xda-developers.com/showpost.php?p=48472093&postcount=1217)
Over 240 kernel are available in the archive:
3Q: RC710b
Acho: C905 (3 different prod nr), C905mx, C906
Advan: Vandroid T2i, T6
Andypad: Andypad, Andypad Pro
Alcatel: Evo 7, T10
AOC: MW0711
Aoson: M12, M12B, M19
Approx: Cheesecake V1 res, Cheesecake V2 cap
Archos: 97 Carbon
Arnova: 7G2, 8G2, 9G2, 10bG2, 7bG3, 7dG3, 7fG3, 8G3, 8cG3, 9G3, 10bG3, 10bG3 DT, Childpad cap, Childpad res
BiPad: 9, 9.2
Blitz: AM801/RS8
BQ: B23, Pascal, Pascal Lite, Kepler, Kepler 2, Newton, Livingstone, Galileo, Tesla
Carrefour: ct705
Craig: CLP281a, CMP741d, CMP743d, CMP745d, CMP745e,
Cresta: CTP810, CTP888
Cube: K8GTC, U9GT2, U10GTA, U10GTA8GB, U15GT, U16GT, U17GT, U17GTW, U18GT, U18GTW8GB, U18GT-H
Danew: 701R, 970_2P, 970_5P, 1010
Denver: Tac7018
Difrnce: DIT1010
Dixon: V700H
DMTech: 720, 724W, 725H, 816, 816HD, 820, 9728B, 9738B
DNS Airtab: E71, E80, M81, M91, M971W, M971G
Easypix, Easypad 970, Easypad Junior 4.0
Efun: M1005HD
Engage: MT7002
Essential B: SmartTab 8001
Eye Key: Fusion FP710
FNF: ifive, ifive s, ifive mini
Gemini: Joytab 07
Genesis: GT1220
GoClever: R73, R74, R75, 7500, R93, R973
Hi Livel: HLV-T702
Hyundai: H700, S800, S800 16G, H900, S900
iJoy: Andromeda
Incatron: FX-2 Pad
Imito: AM801
Intenso: 8" Tab, Tab 704, Tab 704 (INM725HC)
Intex: 8TAB, iTab, iTab 12T055, iTab 12T065
Kingcom: Joypad C81
Lenco: TAB-831
Lexibook: MFC155fr
Maxell: MaxTab C7, MaxTab 8
Mediacom: M715i, M810C, M815i, M820C 3G, Smartpad 850i, Smartpad 852i
Meiying: M10, M11, M11HD
Memup Slidepad: 704c, NG708, NG808, NG9716
MSI: Enjoy 7 Plus, Enjoy 10 Plus ST & PP
Newsmy Newpad: NP720, T3, T7, K7, M7, P9, K97, T85, T17, K10, A1, A2,
Nextbook Next: 7P, 8P, 9P, 7PSE, 7P12SE, 8PSE, 8P12SE, 10P12SE
Noontec: N9
Odys: Loox, Xpress, Next, Vision, Cosmo, Q, Neo X7, Neo X8, Loox Plus, One, Xpress Pro
Overmax: TB08
Phan Mem: Yan 8.1
Pearl: Touchlet X5
Penta: IS709C EUS & CTU
Pipo: BX03
Ployer: Momo 11
Point of View: ProTab 25
Polaroid: PTab7200, Diamond 8 pouces
Practica: TP7, TP8.1, TP10HD
Prestigio: PMP 3307B, PMP 5080B, PMP 5080C Pro, PMP 5097C Pro
Proscan: PLT8031, PLT7035B
Ricatech: Tab10-6
Shiru Hitomi 7, Samarai 7
Skyworth: S7
Technaxx: Tech Tab, Big Tab
Teclast: A10, A15, T760, T760VE, 720HD, P71, P75, P73, P81HD, P85a
Titan: 7010A, 7010B
TomTec: Excellent 7, Excellent 8, Ultimate 10 (3 different prod nr)
Turbo X: Spice II
Touchmate: MID 780
Unknown: BW056, BiPad 9, BiPad 9.2
Venstar: V700H, V800A
Viewsonic: Viewpad 97a
Visture: V2
Wexler: Tab 7i, Tab 7i 3G, Tab 7b 3G
Wolder miTab: Sunset, Citymax, Funk
Wooky: Tablet 2.0
Wopad: i9
Xirion: Excellent 8 ATP7483, Excellent 8 ATP 7658, Ultimate 10 ATP 7526, Ultimate 10 ATP 5659
YuanDao: N12, N50, N70, N80, N90
ENJOY!
- Oma -
Outdated:
changelog v1.2.2
- Bluetooth support (test kernel by fr3ts0n)
changelog v1.2.1
- system ext4 (credits to netlars)
- externalSD mounted as NAND
- patched Google Play (no device restrictions)
- Google Chrome
- Google Apps (Currents, Google+, Play Books, Play Movies, Youtube)
- modded Google Maps (faster & world navigation activated)
- HideStatusbar
- nofrills CPU Control changed by CPU Tweaker
- USB Host fix
changelog v1.2
- stock launcher and nova launcher
- corrections to UI (credits to netlars)
- HDMI settings
- google drive added
changelog v1.1
- busybox updated to 1.20.2-cm9
- stock launcher changed by nova launcher
- jb fonts changed by ics fonts
- contacts visible
- volume+ compatible
v1.0 not released
Hi Oma,
not much traffic here for that really awesome ROM.
I flashed it on my easypad970, and I have no problem so far. I will report soon more.
Hey where are those odys loox owner, Oma has a fine JellyBean for you.:highfive:
JDfense
PS.: I have a tradition, while the thread is sleeping, I post some music.
http://www.youtube.com/watch?v=qi3Kftef6C0&feature=related
edit:
Found so fare two problems:
-screen rotation does not work proper
-I got the message that the SD Card is damaged, but in my card reader this microSD works fine.
I installed it on my Cube U9GT2, and It works fine.
I'd like to know how to get overclock to 1,1ghz, CPUfrills only show 1,0ghz Max.
JDfense said:
edit:
Found so fare two problems:
-screen rotation does not work proper
-I got the message that the SD Card is damaged, but in my card reader this microSD works fine.
Click to expand...
Click to collapse
Same here.
Kernel resolution..
thanks for your incredible job... :good:
i have a easypix easypad junior EP720, and i flash my tab whit your firmware..
but my resolution is 800*480 and i try all the 7" specific Kernel 308 but just your kernel boot my tab.
I can change the resolution of your Kernel?
sorry for my english...
thanks in advance...
lhex said:
I installed it on my Cube U9GT2, and It works fine.
I'd like to know how to get overclock to 1,1ghz, CPUfrills only show 1,0ghz Max.
.
Click to expand...
Click to collapse
The Cube Kernel does not support overclock.
- Oma -
JDfense said:
Found so fare two problems:
-screen rotation does not work proper
-I got the message that the SD Card is damaged, but in my card reader this microSD works fine.
Click to expand...
Click to collapse
- pls use enclosed model fix to calibrate the sensor
- internal sd card damaged should not be an issue if you have used the format_NAND fix directly after first boot
- Oma -
jumeau said:
i have a easypix easypad junior EP720, and i flash my tab whit your firmware..
but my resolution is 800*480 and i try all the 7" specific Kernel 308 but just your kernel boot my tab.
I can change the resolution of your Kernel?
Click to expand...
Click to collapse
The Loox kernel boots your tab? I am heavily surprised.
I'd like to see your hardware. Pls open a terminal type "dmesg" and upload the log.
- Oma -
Oma7144 said:
The Loox kernel boots your tab? I am heavily surprised.
I'd like to see your hardware. Pls open a terminal type "dmesg" and upload the log.
- Oma -
Click to expand...
Click to collapse
Thank you for your answer,
here is the log that I did with the original firmware (2.3.1)
and if you want I have the original firmware (boot.img, kernel.img, misc.img, recovery.img, system.img, and parametre) :silly:
thank you in advance... :good:
View attachment dmesg.txt
Oma7144 said:
- pls use enclosed model fix to calibrate the sensor
- internal sd card damaged should not be an issue if you have used the format_NAND fix directly after first boot
- Oma -
Click to expand...
Click to collapse
It's perfect now.
I have a problem with all mods based on 4.1, Whatsapp doesn't work in this version. In previous one was perfect. Do you know why? Any solution?
Anyway, great job.
Code:
<5>[ 0.000000] Linux version 2.6.32.27 ([email protected]) (gcc version 4.4.0 (GCC) ) #78 PREEMPT Wed Nov 23 15:36:01 CST 2011
<5>[ 0.000000] Kernel command line: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x070000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](system),[email protected](backup),[email protected](cache),[email protected](userdata),[email protected](kpanic),[email protected](user) bootver=2011-08-05#2.06 firmware_ver=0.2.3
<6>[ 0.000000] Memory: 315MB = 315MB total
<4>[ 1.931020] lz300msf_init
<4>[ 1.933309] ---lz300msf start probe---
<6>[ 1.937336] input: lz300msf Touchscreen as /devices/virtual/input/input1
<6>[ 2.032744] input: gsensor as /devices/platform/rk29_i2c.0/i2c-0/0-001c/input/input2
<6>[ 2.040127] mma8452 probe ok
<6>[ 2.310404] RT5621 Audio Codec alsa 1.0.21 0.05
<6>[ 2.321103] asoc: RT5621 <-> rk29_i2s mapping ok
<6>[ 2.722817] camera 33-0: Probing 33-0
<6>[ 2.726379] camera 33-0: RK29 Camera driver attached to camera0(ov7675)
<5>[ 2.992589] Creating 10 MTD partitions on "rk29xxnand":
<5>[ 2.997759] 0x000000400000-0x000000800000 : "misc"
<5>[ 3.003421] 0x000000800000-0x000001000000 : "kernel"
<5>[ 3.008093] 0x000001000000-0x000001400000 : "boot"
<5>[ 3.012793] 0x000001400000-0x000001c00000 : "recovery"
<5>[ 3.017945] 0x000001c00000-0x000011c00000 : "system"
<5>[ 3.023458] 0x000011c00000-0x000022000000 : "backup"
<5>[ 3.028466] 0x000022000000-0x000029400000 : "cache"
<5>[ 3.032917] 0x000029400000-0x000049400000 : "userdata"
<5>[ 3.039041] 0x000049400000-0x000049800000 : "kpanic"
<5>[ 3.051164] 0x000049800000-0x0000eb400000 : "user"
<6>[ 3.222780] EXT3-fs: mounted filesystem with ordered data mode.
<4>[ 626.284763] RTL8192/RTL8188 USB WiFi driver (Powered by Rockchip,Ver 3.04) init.
<6>[ 626.827135] usb 1-1: new full speed USB device using usb11_host and address 2
<6>[ 627.050722] usb 1-1: not running at top speed; connect to a high speed hub
<6>[ 627.061818] usb 1-1: New USB device found, idVendor=0bda, idProduct=817a
<6>[ 627.065676] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 627.072802] usb 1-1: Product: 802.11n WLAN Adapter
<6>[ 627.077559] usb 1-1: Manufacturer: Realtek
Wow, same hardware as Odys-Loox
I will ask Astralix to compile the kernel with your resolution. Will take some time.
- Oma -
lhex said:
I have a problem with all mods based on 4.1, Whatsapp doesn't work in this version. In previous one was perfect.
Click to expand...
Click to collapse
Maybe Whatsapp is currently incompatible with JB. Give feedback to the developer.
Could you pls upload the footprint of the system (take a screenshot of settings/about tablet)?
- Oma -
Oma7144 said:
Maybe Whatsapp is currently incompatible with JB. Give feedback to the developer.
Could you pls upload the footprint of the system (take a screenshot of settings/about tablet)?
- Oma -
Click to expand...
Click to collapse
I believe whatsapp is not compatible with tablets, I liked it in ICS.
Here it goes.
I edited build.prop number model because I bought a N90.
lhex;32167128I said:
edited build.prop number model because I bought a N90.
Click to expand...
Click to collapse
Ok fine. Thank You.
- Oma -
Oma7144 said:
Code:
<5>[ 0.000000] Linux version 2.6.32.27 ([email protected]) (gcc version 4.4.0 (GCC) ) #78 PREEMPT Wed Nov 23 15:36:01 CST 2011
<5>[ 0.000000] Kernel command line: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x070000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](system),[email protected](backup),[email protected](cache),[email protected](userdata),[email protected](kpanic),[email protected](user) bootver=2011-08-05#2.06 firmware_ver=0.2.3
<6>[ 0.000000] Memory: 315MB = 315MB total
<4>[ 1.931020] lz300msf_init
<4>[ 1.933309] ---lz300msf start probe---
<6>[ 1.937336] input: lz300msf Touchscreen as /devices/virtual/input/input1
<6>[ 2.032744] input: gsensor as /devices/platform/rk29_i2c.0/i2c-0/0-001c/input/input2
<6>[ 2.040127] mma8452 probe ok
<6>[ 2.310404] RT5621 Audio Codec alsa 1.0.21 0.05
<6>[ 2.321103] asoc: RT5621 <-> rk29_i2s mapping ok
<6>[ 2.722817] camera 33-0: Probing 33-0
<6>[ 2.726379] camera 33-0: RK29 Camera driver attached to camera0(ov7675)
<5>[ 2.992589] Creating 10 MTD partitions on "rk29xxnand":
<5>[ 2.997759] 0x000000400000-0x000000800000 : "misc"
<5>[ 3.003421] 0x000000800000-0x000001000000 : "kernel"
<5>[ 3.008093] 0x000001000000-0x000001400000 : "boot"
<5>[ 3.012793] 0x000001400000-0x000001c00000 : "recovery"
<5>[ 3.017945] 0x000001c00000-0x000011c00000 : "system"
<5>[ 3.023458] 0x000011c00000-0x000022000000 : "backup"
<5>[ 3.028466] 0x000022000000-0x000029400000 : "cache"
<5>[ 3.032917] 0x000029400000-0x000049400000 : "userdata"
<5>[ 3.039041] 0x000049400000-0x000049800000 : "kpanic"
<5>[ 3.051164] 0x000049800000-0x0000eb400000 : "user"
<6>[ 3.222780] EXT3-fs: mounted filesystem with ordered data mode.
<4>[ 626.284763] RTL8192/RTL8188 USB WiFi driver (Powered by Rockchip,Ver 3.04) init.
<6>[ 626.827135] usb 1-1: new full speed USB device using usb11_host and address 2
<6>[ 627.050722] usb 1-1: not running at top speed; connect to a high speed hub
<6>[ 627.061818] usb 1-1: New USB device found, idVendor=0bda, idProduct=817a
<6>[ 627.065676] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 627.072802] usb 1-1: Product: 802.11n WLAN Adapter
<6>[ 627.077559] usb 1-1: Manufacturer: Realtek
Wow, same hardware as Odys-Loox
I will ask Astralix to compile the kernel with your resolution. Will take some time.
- Oma -
Click to expand...
Click to collapse
Thank you very much Oma :laugh:
thanks in advance to Astralix ...
@mega-samu: pls find here the kernel of the Approx Cheesecake and enclosed a model fix.
- Oma -
can i flash this to my Arnova 7b g3, can you provide me with the right kernel and recovery files thanks. keep up the good work!:good:
Works fine on cube Thx.
Have you planed a cm10 port?
drift_tm said:
can i flash this to my Arnova 7b g3, can you provide me with the right kernel and recovery files thanks. keep up the good work!:good:
Click to expand...
Click to collapse
Flash the images as it is with the Arnova 7b G3 Kernel. You will find the kernel here: http://forum.xda-developers.com/showpost.php?p=29649602&postcount=4
- Oma -

[Completed] Full AOSP on MStar Cedric3 upgrade from Jelly Bean 4.1.1 to Kitkat 4.4.4 help needed

Hi Developers ,
I bought a car android DVD from a distributor in Egypt I have no experience in android devices and found out later on it runs android 4.1.1 with an old user interface I would like to upgrade it to Kitkat 4.4.4 and install a new interface but have no idea how to the distributor says it is not up gradable so I decided to consult you guys to tell me what to do and is it possible to upgrade the device I managed to get the specs which is very similar to this device
General Specifications
Manufacturer MStar Semiconductor, Inc.
Model Full AOSP on MStar Cedric3
Android version 4.1.1; V1.0.1.0; SDK16
CPU 2 cores; ARMv7 Processor rev 0 (v7l) cedric
Display 1024 x 600; DPI: 160; Evaluated Size: 7.4"
Touch screen Multitouch 5 points
GPU Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 1024 MB (1014 MB available)
Flash 16 GB Build-in (14.676 GB actual); 8 GB (7.455 GB actual)
Communications
Phone None
WiFi ntfs_3g
USB Host Yes
Bluetooth no
GPS No
Advanced Features
Front camera Photo: 2.1 MP; Max: 1920x1080; Video: 2.1 MP; Max: 1920x1080; Focus: auto; Flash modes: auto
Back camera Photo: 0.9 MP; Max size: 1280x720; Video: 0.9 MP; Max: 1280x720; Focus: auto; Flash modes: auto
Vibrator No
Supported languages 47; Afrikaans; Amharic; Arabic; Belarusian; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Thai; Turkish; Ukrainian; Vietnamese; Chinese; Zulu
Battery Technology: null; Voltage: 0
Owner's comment: Breton Car AVN
KERNEL: Linux version 3.4.5 ([email protected]) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #609 SMP Wed Apr 23 14:08:14 CST 2014
CODENAME: REL
Mainboard: unknown
BRAND: Mstar
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: mstarcedric3
DISPLAY: full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
FINGERPRINT: Mstar/full_mstarcedric3/mstarcedric3:4.1.1/JRO03C/V1.0.1.0:userdebug/test-keys
HARDWARE: cedric
ID: JRO03C
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1790.77
processor : 1
BogoMIPS : 1784.21
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : cedric
Revision : 0000
Serial : 0000000000000000
GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
ro.build.version.incremental=V1.0.1.0
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=2014年 02月 09日 星期日 11:25:17 CST
ro.build.date.utc=1391916317
ro.build.type=userdebug
ro.build.user=john
ro.build.host=john
ro.build.tags=test-keys
ro.product.model=Full AOSP on MStar Cedric3
ro.product.brand=Mstar
ro.product.name=full_mstarcedric3
ro.product.device=mstarcedric3
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=MStar Semiconductor, Inc.
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=cedric
# ro.build.product is obsolete; use ro.product.device
ro.build.product=mstarcedric3
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
ro.build.fingerprint=Mstar/full_mstarcedric3/mstarcedric3:4.1.1/JRO03C/V1.0.1.0:userdebug/test-keys
ro.build.characteristics=nosdcard
# end build properties
ms.mstplayer=1
ms.mstplayer.logless=1
hw.ms.display.destination=3
hw.ms.sc1_sync_sc0=1
hw.ms.hdmitx_timing=480_60P
hw.ms.hdmitx_color=YUV
ro.ms.System.bDualScreen=true
debug.sf.electron_frames=1
ms.subchannel.audio=1
hw.ms.sytem.audio=0
persist.service.adb.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.sf.lcd_density=160
qemu.sf.lcd_density=160
dalvik.vm.heapsize=128m
ro.opengles.version=131072
mstar.mstplayer.bd=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
8188eu 581869 0 - Live 0x00000000
ntfs_3g 186713 0 - Live 0x00000000 (O)
mali 94915 18 - Live 0x00000000 (O)
ump 26175 25 mali, Live 0x00000000 (O)
RAM: 1024 MB (1014 MB available)
System RAM: 1014.000MB
Flash: 16 GB Build-in (14.676 GB actual); 8 GB (7.455 GB actual)
mmcblk0: 14.676 GB
sda: 7.455 GB
can anyone help me please.
Hi
Welcome to xda.
I see that you've posted in the android auto section. If you don't get any response then feel free to ask in General discussion > Questions and Answers > [HELP THREAD] Ask ANY Question. Noob Friendly
Your question might get some more exposure there.

Full AOSP on MStar Cedric3 upgrade from Jelly Bean 4.1.1 to Kitkat 4.4.4 and firmware

Hi Developers ,
I bought a car android DVD from a distributor in Egypt I have no experience in android devices and found out later on it runs android 4.1.1 with an old user interface I would like to upgrade it to Kitkat 4.4.4 and install a new interface but have no idea how to the distributor says it is not up gradable so I decided to consult you guys to tell me what to do and is it possible to upgrade the device I managed to get the specs which is very similar to this device
General Specifications
Manufacturer MStar Semiconductor, Inc.
Model Full AOSP on MStar Cedric3
Android version 4.1.1; V1.0.1.0; SDK16
CPU 2 cores; ARMv7 Processor rev 0 (v7l) cedric
Display 1024 x 600; DPI: 160; Evaluated Size: 7.4"
Touch screen Multitouch 5 points
GPU Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 1024 MB (1014 MB available)
Flash 16 GB Build-in (14.676 GB actual); 8 GB (7.455 GB actual)
Communications
Phone None
WiFi ntfs_3g
USB Host Yes
Bluetooth no
GPS No
Advanced Features
Front camera Photo: 2.1 MP; Max: 1920x1080; Video: 2.1 MP; Max: 1920x1080; Focus: auto; Flash modes: auto
Back camera Photo: 0.9 MP; Max size: 1280x720; Video: 0.9 MP; Max: 1280x720; Focus: auto; Flash modes: auto
Vibrator No
Supported languages 47; Afrikaans; Amharic; Arabic; Belarusian; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Thai; Turkish; Ukrainian; Vietnamese; Chinese; Zulu
Battery Technology: null; Voltage: 0
Owner's comment: Breton Car AVN
KERNEL: Linux version 3.4.5 ([email protected]) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #609 SMP Wed Apr 23 14:08:14 CST 2014
CODENAME: REL
Mainboard: unknown
BRAND: Mstar
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: mstarcedric3
DISPLAY: full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
FINGERPRINT: Mstar/full_mstarcedric3/mstarcedric3:4.1.1/JRO03C/V1.0.1.0:userdebug/test-keys
HARDWARE: cedric
ID: JRO03C
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1790.77
processor : 1
BogoMIPS : 1784.21
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : cedric
Revision : 0000
Serial : 0000000000000000
GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
ro.build.version.incremental=V1.0.1.0
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=2014年 02月 09日 星期日 11:25:17 CST
ro.build.date.utc=1391916317
ro.build.type=userdebug
ro.build.user=john
ro.build.host=john
ro.build.tags=test-keys
ro.product.model=Full AOSP on MStar Cedric3
ro.product.brand=Mstar
ro.product.name=full_mstarcedric3
ro.product.device=mstarcedric3
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=MStar Semiconductor, Inc.
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=cedric
# ro.build.product is obsolete; use ro.product.device
ro.build.product=mstarcedric3
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
ro.build.fingerprint=Mstar/full_mstarcedric3/mstarcedric3:4.1.1/JRO03C/V1.0.1.0:userdebug/test-keys
ro.build.characteristics=nosdcard
# end build properties
ms.mstplayer=1
ms.mstplayer.logless=1
hw.ms.display.destination=3
hw.ms.sc1_sync_sc0=1
hw.ms.hdmitx_timing=480_60P
hw.ms.hdmitx_color=YUV
ro.ms.System.bDualScreen=true
debug.sf.electron_frames=1
ms.subchannel.audio=1
hw.ms.sytem.audio=0
persist.service.adb.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.sf.lcd_density=160
qemu.sf.lcd_density=160
dalvik.vm.heapsize=128m
ro.opengles.version=131072
mstar.mstplayer.bd=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
8188eu 581869 0 - Live 0x00000000
ntfs_3g 186713 0 - Live 0x00000000 (O)
mali 94915 18 - Live 0x00000000 (O)
ump 26175 25 mali, Live 0x00000000 (O)
RAM: 1024 MB (1014 MB available)
System RAM: 1014.000MB
Flash: 16 GB Build-in (14.676 GB actual); 8 GB (7.455 GB actual)
mmcblk0: 14.676 GB
sda: 7.455 GB
can anyone help me please.
AhmedKhalifa said:
Hi Developers ,
I bought a car android DVD from a distributor in Egypt I have no experience in android devices and found out later on it runs android 4.1.1 with an old user interface I would like to upgrade it to Kitkat 4.4.4 and install a new interface but have no idea how to the distributor says it is not up gradable so I decided to consult you guys to tell me what to do and is it possible to upgrade the device I managed to get the specs which is very similar to this device
General Specifications
Manufacturer MStar Semiconductor, Inc.
Model Full AOSP on MStar Cedric3
Android version 4.1.1; V1.0.1.0; SDK16
CPU 2 cores; ARMv7 Processor rev 0 (v7l) cedric
Display 1024 x 600; DPI: 160; Evaluated Size: 7.4"
Touch screen Multitouch 5 points
GPU Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 1024 MB (1014 MB available)
Flash 16 GB Build-in (14.676 GB actual); 8 GB (7.455 GB actual)
Communications
Phone None
WiFi ntfs_3g
USB Host Yes
Bluetooth no
GPS No
Advanced Features
Front camera Photo: 2.1 MP; Max: 1920x1080; Video: 2.1 MP; Max: 1920x1080; Focus: auto; Flash modes: auto
Back camera Photo: 0.9 MP; Max size: 1280x720; Video: 0.9 MP; Max: 1280x720; Focus: auto; Flash modes: auto
Vibrator No
Supported languages 47; Afrikaans; Amharic; Arabic; Belarusian; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Thai; Turkish; Ukrainian; Vietnamese; Chinese; Zulu
Battery Technology: null; Voltage: 0
Owner's comment: Breton Car AVN
KERNEL: Linux version 3.4.5 ([email protected]) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #609 SMP Wed Apr 23 14:08:14 CST 2014
CODENAME: REL
Mainboard: unknown
BRAND: Mstar
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: mstarcedric3
DISPLAY: full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
FINGERPRINT: Mstar/full_mstarcedric3/mstarcedric3:4.1.1/JRO03C/V1.0.1.0:userdebug/test-keys
HARDWARE: cedric
ID: JRO03C
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1790.77
processor : 1
BogoMIPS : 1784.21
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : cedric
Revision : 0000
Serial : 0000000000000000
GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
ro.build.version.incremental=V1.0.1.0
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=2014年 02月 09日 星期日 11:25:17 CST
ro.build.date.utc=1391916317
ro.build.type=userdebug
ro.build.user=john
ro.build.host=john
ro.build.tags=test-keys
ro.product.model=Full AOSP on MStar Cedric3
ro.product.brand=Mstar
ro.product.name=full_mstarcedric3
ro.product.device=mstarcedric3
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=MStar Semiconductor, Inc.
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=cedric
# ro.build.product is obsolete; use ro.product.device
ro.build.product=mstarcedric3
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_mstarcedric3-userdebug 4.1.1 JRO03C V1.0.1.0 test-keys
ro.build.fingerprint=Mstar/full_mstarcedric3/mstarcedric3:4.1.1/JRO03C/V1.0.1.0:userdebug/test-keys
ro.build.characteristics=nosdcard
# end build properties
ms.mstplayer=1
ms.mstplayer.logless=1
hw.ms.display.destination=3
hw.ms.sc1_sync_sc0=1
hw.ms.hdmitx_timing=480_60P
hw.ms.hdmitx_color=YUV
ro.ms.System.bDualScreen=true
debug.sf.electron_frames=1
ms.subchannel.audio=1
hw.ms.sytem.audio=0
persist.service.adb.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.sf.lcd_density=160
qemu.sf.lcd_density=160
dalvik.vm.heapsize=128m
ro.opengles.version=131072
mstar.mstplayer.bd=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
8188eu 581869 0 - Live 0x00000000
ntfs_3g 186713 0 - Live 0x00000000 (O)
mali 94915 18 - Live 0x00000000 (O)
ump 26175 25 mali, Live 0x00000000 (O)
RAM: 1024 MB (1014 MB available)
System RAM: 1014.000MB
Flash: 16 GB Build-in (14.676 GB actual); 8 GB (7.455 GB actual)
mmcblk0: 14.676 GB
sda: 7.455 GB
can anyone help me please.
Click to expand...
Click to collapse
After a weak I will receive an update

[PORT] CM-13.0 for Xiaomi Redmi 3S (land) with my porting kernel

kernel:
https://github.com/yangyangnau/android_kernel_xiaomi_msm8937
device:
https://github.com/yangyangnau/android_device_xiaomi_land
local_manifests and patchs:
https://github.com/yangyangnau/redmi3s-misc
Reserved
STATUS REPORT:
boot: almost OK
random freezing
random reboot
Reserved
Does it mean xiaomi hasn't release the kernel yet?
Sent from my Redmi 3 using Tapatalk
h4fiz said:
Does it mean xiaomi hasn't release the kernel yet?
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
Yeah! I'm porting linux kernel for redmi3s.
http://forum.xda-developers.com/redmi-3/development/port-linux-kernel-source-xiaomi-redmi3s-t3469965
yangyangnau said:
Yeah! I'm porting linux kernel for redmi3s.
http://forum.xda-developers.com/redmi-3/development/port-linux-kernel-source-xiaomi-redmi3s-t3469965
Click to expand...
Click to collapse
Wow, keep working on dev ?? so you do have a redmi 3s?? Cause i have a plan to buy redmi 3x in near future, so maybe i can help you testing the kernel
Sent from my Redmi 3 using Tapatalk
h4fiz said:
Wow, keep working on dev so you do have a redmi 3s?? Cause i have a plan to buy redmi 3x in near future, so maybe i can help you testing the kernel
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
Oh, NO, It's HELL.
If you think it's important to get sourcecode, don't jump to redmi3s/3x yet.
If you insist it, you are wellcome.
yangyangnau said:
Oh, NO, It's HELL.
If you think it's important to get sourcecode, don't jump to redmi3s/3x yet.
If you insist it, you are wellcome.
Click to expand...
Click to collapse
I'm not that hurry to get the source code, i can live with miui though, but if there is a faster rom builded from source then i'll move there ??? cause i really need fingerprint on it, and the the design that different from any other redmi 3 varian ???
Sent from my Redmi 3 using Tapatalk
@yangyangnau pm sent.
Very interesting! I've been away from Xiaomi for about 2 years... but decided to get the Redmi 3S as backup phone. Now running some Chinese CM 13 rom, but this looks promising.
Totally forgot about Xiaomi and the trouble surround kernel sources. I remember with the Mi2S we used a kernel build from scratch too for development. But it seems they do release stuff nowadays? Only not directly?
Robin>Hood said:
Very interesting! I've been away from Xiaomi for about 2 years... but decided to get the Redmi 3S as backup phone. Now running some Chinese CM 13 rom, but this looks promising.
Totally forgot about Xiaomi and the trouble surround kernel sources. I remember with the Mi2S we used a kernel build from scratch too for development. But it seems they do release stuff nowadays? Only not directly?
Click to expand...
Click to collapse
Xiaomi released some source, but redmi 3s doesn't get luck.
https://github.com/MiCode/Xiaomi_Kernel_OpenSource
You're the best,
I also wrote a complaint letter today to them
Hi, I've used your device source code as base for my own port, but I updated most of the HAL drivers from stock QC files.
But I can't boot. I get stuck with an error "Too many open files". Did you ever had this bug ?
I also did my own kernel based of the LA.UM.5.3_RB1.1 It seam to be the most up to date for MSM8937.
You can have a look at my port here :
Kernel : https://github.com/supercairos/android_kernel_xiaomi_msm8937
Device : https://github.com/supercairos/android_device_xiaomi_land
Supercairos said:
Hi, I've used your device source code as base for my own port, but I updated most of the HAL drivers from stock QC files.
But I can't boot. I get stuck with an error "Too many open files". Did you ever had this bug ?
I also did my own kernel based of the LA.UM.5.3_RB1.1 It seam to be the most up to date for MSM8937.
You can have a look at my port here :
Kernel : https://github.com/supercairos/android_kernel_xiaomi_msm8937
Device : https://github.com/supercairos/android_device_xiaomi_land
Click to expand...
Click to collapse
copy from porting kernel thread:
About LA.UM.5.3-01110-8x37.0:
I just try to find a QAEP release which match the release date of Redmi 3S as much as possible. Nothing more.
About "too many open files":
My repo #deccaf5 (9.21.2016) can boot cm, but it need force reboot several times.
After that commit, the error same as yours. Sorry for my bad.
https://github.com/yangyangnau/andro...ce_xiaomi_land
A few of days ago, I'm try using my kernel and proprietary-files.txt with the repo below.
https://github.com/Silentlys/android_device_xiaomi_land
Clean the fake kernel header tree. Clean the malware (2345 stuff). Clean TWRP stuffs.
No luck. Just get black screen. Can't remember the error messages. Could be "too many open files".
I guess the proprietary-files.txt is a problem.
Thanks!
Might be
I will investigate more soon. I've tried to raise the Open file limit but doesn't seams to fix the issue.
About the Kernel Xiaomi based his SW on, it's probably LA.UM.5.1_rb1.4 (not sure what manifest exactly quite hard to test ) as it's the branch that Ardreno was build on (you can check the logs and see that at each app boot). I based mine on the lastest branch that support msm8937_64.
Supercairos said:
Might be
I will investigate more soon. I've tried to raise the Open file limit but doesn't seams to fix the issue.
About the Kernel Xiaomi based his SW on, it's probably LA.UM.5.1_rb1.4 (not sure what manifest exactly quite hard to test ) as it's the branch that Ardreno was build on (you can check the logs and see that at each app boot). I based mine on the lastest branch that support msm8937_64.
Click to expand...
Click to collapse
I don't think the kernel version is a big issue, but i will check it.
yangyangnau said:
I don't think the kernel version is a big issue, but i will check it.
Click to expand...
Click to collapse
Agreed
update:
https://github.com/Silentlys/android_device_xiaomi_land/issues/3
https://github.com/Silentlys/proprietary_vendor_xiaomi
we can update the proprietary-files.txt, and try to build CM soon.
Still can't boot CM-13.
[ 12.092118] surfaceflinger[425]: unhandled input address range fault (11) at 0x6e5f6570697012, esr 0x92000044
[ 12.092131] pgd = ffffffc07679f000
[ 12.092138] [6e5f6570697012] *pgd=0000000000000000, *pud=0000000000000000
[ 12.092148]
[ 12.092159] CPU: 7 PID: 425 Comm: surfaceflinger Tainted: G W 3.18.20-g5d5fa78-dirty #1
[ 12.092165] Hardware name: Qualcomm Technologies, Inc. MSM8937-PMI8950 QRD SKU1 (DT)
[ 12.092172] task: ffffffc078c6be80 ti: ffffffc075820000 task.ti: ffffffc075820000
[ 12.092180] PC is at 0x7fb5294fc8
[ 12.092186] LR is at 0x7fb5294fac
[ 12.092193] pc : [<0000007fb5294fc8>] lr : [<0000007fb5294fac>] pstate: 80000000
[ 12.092198] sp : 0000007ff6cb01b0
[ 12.092204] x29: 0000007ff6cb01d0 x28: 0000000000000000
[ 12.092213] x27: 0000000000000000 x26: 0000007fb5354048
[ 12.092223] x25: 0000007fb52f8060 x24: 00000055cbc274c9
[ 12.092232] x23: 00000055cbc26fb0 x22: 00000055cbc273e0
[ 12.092241] x21: 0000000000000004 x20: 00000055cbc273e0
[ 12.092250] x19: 00000055cbc27ea0 x18: 0000000000000000
[ 12.092260] x17: 0000000000000000 x16: 0000007fb7340a58
[ 12.092269] x15: 0000000000000007 x14: 0000000000000043
[ 12.092280] x13: 0000000000000004 x12: 0000000000000072
[ 12.092289] x11: 0000000000000007 x10: 7069702030313a6d
[ 12.092298] x9 : 00000055cbc27e40 x8 : 00000055cbc27fec
[ 12.092307] x7 : 0000000000000040 x6 : 0000000000000000
[ 12.092316] x5 : 0000000000000001 x4 : 0000000000000000
[ 12.092325] x3 : 0000000000000004 x2 : 0000000000000001
[ 12.092334] x1 : 0000007fb7347eb4 x0 : 756e5f6570697012
[ 12.092342]
[ 12.096796] init: Service 'surfaceflinger' (pid 425) killed by signal 11
[ 12.096828] init: Service 'surfaceflinger' (pid 425) killing any children in process group
Click to expand...
Click to collapse
If I do crazy thing as below, the backlight flashes.
Code:
chmod -R 777 /dev
and get logcat:
01-12 04:26:01.870 1738 1738 I gralloc : using (fd=19)
01-12 04:26:01.870 1738 1738 I gralloc : id = mdssfb_80000
01-12 04:26:01.870 1738 1738 I gralloc : xres = 720 px
01-12 04:26:01.870 1738 1738 I gralloc : yres = 1280 px
01-12 04:26:01.870 1738 1738 I gralloc : xres_virtual = 720 px
01-12 04:26:01.870 1738 1738 I gralloc : yres_virtual = 2560 px
01-12 04:26:01.870 1738 1738 I gralloc : bpp = 32
01-12 04:26:01.870 1738 1738 I gralloc : r = 0:8
01-12 04:26:01.870 1738 1738 I gralloc : g = 8:8
01-12 04:26:01.870 1738 1738 I gralloc : b = 16:8
01-12 04:26:01.871 1738 1738 I gralloc : width = 62 mm (294.967743 dpi)
01-12 04:26:01.871 1738 1738 I gralloc : height = 110 mm (295.563629 dpi)
01-12 04:26:01.871 1738 1738 I gralloc : refresh rate = 369.50 Hz
01-12 04:26:01.876 1738 1738 E SurfaceFlinger: hwcomposer module not found
01-12 04:26:01.878 1738 1738 I SurfaceFlinger: EGL information:
01-12 04:26:01.878 1738 1738 I SurfaceFlinger: vendor : Android
01-12 04:26:01.878 1738 1738 I SurfaceFlinger: version : 1.4 Android META-EGL
01-12 04:26:01.878 1738 1738 I SurfaceFlinger: extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_swap_buffers_with_damage EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_3D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_reusable_sync EGL_KHR_fence_sync EGL_KHR_create_context EGL_KHR_surfaceless_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable EGL_KHR_partial_update EGL_KHR_create_context_no_error
01-12 04:26:01.878 1738 1738 I SurfaceFlinger: Client API: OpenGL_ES
01-12 04:26:01.878 1738 1738 I SurfaceFlinger: EGLSurface: 8-8-8-8, config=0x55b063d2a0
01-12 04:26:01.886 1738 1738 I SurfaceFlinger: OpenGL ES informations:
01-12 04:26:01.886 1738 1738 I SurfaceFlinger: vendor : Qualcomm
01-12 04:26:01.886 1738 1738 I SurfaceFlinger: renderer : Adreno (TM) 505
01-12 04:26:01.886 1738 1738 I SurfaceFlinger: version : OpenGL ES 3.1 [email protected] ([email protected])
01-12 04:26:01.886 1738 1738 I SurfaceFlinger: extensions: GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_vertex_half_float GL_OES_framebuffer_object GL_OES_rgb8_rgba8 GL_OES_compressed_ETC1_RGB8_texture GL_AMD_compressed_ATC_texture GL_KHR_texture_compression_astc_ldr GL_KHR_texture_compression_astc_hdr GL_OES_texture_compression_astc GL_OES_texture_npot GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_OES_texture_3D GL_EXT_color_buffer_float GL_EXT_color_buffer_half_float GL_QCOM_alpha_test GL_OES_depth24 GL_OES_packed_depth_stencil GL_OES_depth_texture GL_OES_depth_texture_cube_map GL_EXT_sRGB GL_OES_texture_float GL_OES_texture_float_linear GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_EXT_texture_type_2_10_10_10_REV GL_EXT_texture_sRGB_decode GL_OES_element_index_uint GL_EXT_copy_image GL_EXT_geometry_shader GL_EXT_tessellation_shader GL_OES_texture_stencil8 GL_EXT_shader_io_blocks GL_OES_shader_image_atomic GL_OES_sample_variables GL_EXT_texture_border_clamp GL_EXT_multisampled_render_to_texture
01-12 04:26:01.886 1738 1738 I SurfaceFlinger: GL_MAX_TEXTURE_SIZE = 16384
01-12 04:26:01.886 1738 1738 I SurfaceFlinger: GL_MAX_VIEWPORT_DIMS = 16384
01-12 04:26:01.887 1738 1738 W GraphicBufferAllocator: alloc(720, 1280, 1, 20001a00, ...) failed -12 (Out of memory)
01-12 04:26:01.887 1738 1738 D GraphicBufferAllocator: Allocated buffers:
01-12 04:26:01.887 1738 1738 D GraphicBufferAllocator: 0x55b071f040: 3600.00 KiB | 720 ( 720) x 1280 | 1 | 0x20001a00
01-12 04:26:01.887 1738 1738 D GraphicBufferAllocator: 0x55b071f290: 3600.00 KiB | 720 ( 720) x 1280 | 1 | 0x20001a00
01-12 04:26:01.887 1738 1738 D GraphicBufferAllocator: Total allocated (estimate): 7200.00 KB
01-12 04:26:01.887 1738 1738 E : GraphicBufferAlloc::createGraphicBuffer(w=720, h=1280) failed (Out of memory), handle=0x0
01-12 04:26:01.887 1738 1738 E BufferQueueProducer: [FramebufferSurface] allocateBuffers: failed to allocate buffer (0 x 0, format 1, usage 536877568)
01-12 04:26:01.889 1738 1738 D SurfaceFlinger: Set power mode=2, type=0 flinger=0x55b05b2550
01-12 04:26:01.931 501 501 I ServiceManager: Waiting for service AtCmdFwd...
01-12 04:26:01.962 1743 1743 I Dpps : static DppsServer *DppsServer::GetInstance(): DppsServer ref count increased to 1
01-12 04:26:01.962 1742 1742 F appproc : app_process: Unable to determine ABI list from property ro.product.cpu.abilist64.
01-12 04:26:01.962 1742 1742 F libc : Fatal signal 6 (SIGABRT), code -6 in tid 1742 (app_process64)
01-12 04:26:01.962 1743 1743 I Dpps : InitPrimaryContextFeatures():265 Dpps feature enable properties are false, skipping primary feature context init
01-12 04:26:01.963 452 452 I DEBUG : property debug.db.uid not set; NOT waiting for gdb.
01-12 04:26:01.963 452 452 I DEBUG : HINT: adb shell setprop debug.db.uid 100000
01-12 04:26:01.963 452 452 I DEBUG : HINT: adb forward tcp:5039 tcp:5039
01-12 04:26:02.014 452 452 F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
01-12 04:26:02.014 452 452 F DEBUG : CM Version: '13.0-20161007-UNOFFICIAL-land'
01-12 04:26:02.014 452 452 F DEBUG : Build fingerprint: 'Xiaomi/land/land:6.0.1/MMB29M/V7.5.9.0.MALCNDE:user/release-keys'
01-12 04:26:02.014 452 452 F DEBUG : Revision: '0'
01-12 04:26:02.014 452 452 F DEBUG : ABI: 'arm64'
01-12 04:26:02.014 452 452 F DEBUG : pid: 1742, tid: 1742, name: app_process64 >>> /system/bin/app_process64 <<<
01-12 04:26:02.014 452 452 F DEBUG : signal 6 (SIGABRT), code -6 (SI_TKILL), fault addr --------
01-12 04:26:02.023 452 452 F DEBUG : Abort message: 'app_process: Unable to determine ABI list from property ro.product.cpu.abilist64.'
Click to expand...
Click to collapse

Categories

Resources