☆.☆ R & D thread ☆.☆
it seems that these two models are very similar.
Galaxy Y uses bcm21553 processor on totoro board.
partition information file is "totoro_0623.pit"
it would be interesting to discuss, which software is interchangeable among the two phones.
please post a dmesg output of CM Kernel system for comparison purposes.
http://forum.xda-developers.com/forumdisplay.php?f=1472
I really do appreciate the mod moving this post out of dev section, so it will escape the attention of most devs.
op. "IRON FIST" at it's best.
below is a dmesg from a Galaxy Y GT-S5360:
Linux version 2.6.35.7 ([email protected]) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-68) ) #38 PREEMPT Wed Mar 21 21:46:02 IST 2012
CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
Machine: BCM21553 ThunderbirdEDN31 platform
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 92672
Memory: 362MB = 362MB total
Memory: 295108k/295108k available, 75580k reserved, 0K highmem
Virtual kernel memory layout:
vector _: 0xffff0000 - 0xffff1000 ( 004 kB)
fixmap _: 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA ____: 0xff000000 - 0xffe00000 ( 014 MB)
vmalloc : 0xd7000000 - 0xf0000000 ( 400 MB)
lowmem _: 0xc0000000 - 0xd6a00000 ( 362 MB)
pkmap __: 0xbfe00000 - 0xc0000000 ( 002 MB)
modules : 0xbf000000 - 0xbfe00000 ( 014 MB)
.init __: 0xc0008000 - 0xc003f000 ( 220 kB)
.text __: 0xc003f000 - 0xc0627000 (6048 kB)
.data __: 0xc0692000 - 0xc07066a0 ( 466 kB)
http://forum.xda-developers.com/showpost.php?p=24637502&postcount=1
Hello Guys How Are you all,
when surfing and searching on the net, i found some phones that have the same board like the GALAXY Y GT-S5360 and this is the list :
--------------------------------THIS IS THE PHONES AT 833Mhz
Samsung GT-S5300 Galaxy Pocket : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-S5512 Galaxy Y Pro Duos : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-S6102 Galaxy Y Duos : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-S5360 Galaxy Y : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-B5510 Galaxy Y Pro / Galaxy Txt : CPU: 32bit Broadcom BCM21553, 833MHz
Samsung GT-S5570I Galaxy Pop/Mini : CPU: 32bit Broadcom BCM21553, 833MHz
Newest 3G Smart Mobile Phone T616 : CPU: 32bit Broadcom BCM21553, 833MHz
--------------------------------THE ONLY ONE THAT HAVE 1Ghz
Newest 3G smart mobile phone T968 : CPU: 32bit Broadcom BCM21553, 1GHz
------------------------------------------------------
Samsung Galaxy Hardware Infos :
Here is the part of this topic where i will post any new infos about Samsung Galaxy Y.
And the Great New is The Galaxy Y have the latest technology From Broadcom .
Graphics GPU :
High-Quality display support up to HVGA Full HD Support 1080p.
8 Megapixel JPEG Camera with mipi serial interface.
VGA Enc/Dec Up to 30 frames per second H.264, MPEG-4, H.263 & WMV9 Video.
The Latest Technology From Broadcom VideoCore (TM) 4 Best then NOKIA N8.
CPU : 60nm ARM11 (not v6) Compatible ARMv6 Based on ARM Cortex A9. OpenGL 2.0 Hardware Acceleration, Integrated App Processor.
CHIPSET :
PMU : BCM59035
HSPA : BCM21553
2G/3G HS Transceiver : BCM2091
OPTIONS :
NFC : BCM20791
GPS/GLONASS : BCM47511
Mobile WLAN/BT/FM : BCM4330
This page is edited by me and sources links included.
http://en.wikipedia.org/wiki/VideoCore
does nobody in here know which CPU you have ???? wow.
Our specs:
Processor:
-Qualcomm MSM7227 (600 MHz) Arm v6l
32 bit, CPU Core: ARM1136EJ-S
Cortex-A Series
now we know
OK now this rumour is falsified, which was spreading on XDA about SGY//Fit compatibility. will save some bother. ty
Related
Hello folks. I have an intriguing tablet POSITIVO YPY_ABD10 and was wondering if it is possible to put some custom recovery on it and then try to change the rom because it comes in it is terrible.
Specs:
Positivo YPY_ABD10
Operating System Android 4.0.4
Model Positivo YPY_AB10D
Processor ARM AMLOGIC @ 1.00 GHz
1 processor
Processor ID ARM implementer 65 architecture 7 variant 2 part 3081 revision 4
L1 Instruction Cache 0 KB
L1 Data Cache 0 KB
L2 Cache 0 KB
L3 Cache 0 KB
Motherboard f03ref_NX
BIOS
Memory 652 MB
-------------------------
CPU
Load Average: 3.00 3.01 3.17 1/664 3934
Processor: ARMv7 Processor rev4(v7L)
BogoMIPS: 655.36
Features: swp half thumb fastmult vfp edsp neon vfpv3
CPU Implementer: 0x41
CPU architecture: 7
CPU variant: 0x2
CPU part: 0xc09
CPU revision: 4
Hardware: AMLOGIC MESON3 8726M SKT SH
Revision: 0020
Serial: 000000000000000c
What are my options? Compile manually and try to install?
Thank you all. (Sorry my english)
Thanks for all.
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) Rom for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above. (Good to notice that my device is not in list of supported devices by ClockworkMod.
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.)
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Excuse me for my English.
Thanks in advance.
Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) Rom for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above. (Good to notice that my device is not in list of supported devices by ClockworkMod.
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.)
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Excuse me for my English.
Thanks in advance.
Click to expand...
Click to collapse
Greetings and welcome to xda. There doesn't appear to be any custom rom for your device but if you ask your question here
http://forum.xda-developers.com/android/help
the experts there maybe able to help you
Good Luck
Sawdoctor
Hi,
I received a Galaxy J7 Prime, but it seems to have a Qualcomm MSM8953.
It has as type SM-G6100, so I wonder what TWRP I need.
Any advice?
Thanks,
From Android System Info:
--
Device: on7xltechn
Product: on7xltezh
Fingerprint: samsung/on7xltezh/on7xltechn:6.0.1/MMB29M/G6100ZHU1APL3
--
From /proc/cpuinfo (8 cores, shortened):
--
processor : 7
model name : AArch64 Processor rev 4 (aarch64)
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : Qualcomm Technologies, Inc MSM8953
Revision : 0005
Hardware : Qualcomm Technologies, Inc MSM8953
--
I did a small search and unfortunately i can't find one for your device.
Oh. I know it. This I galaxy on 7 but it's installed ROM of galaxy j7 prime (because it isn't different except chip Qualcomm and exynose)
Are there any news about that? I need that too...
Hello everyone in this forum, I am am looking for a solution to my problem ..
This is my phone information :
**
DISPOSITIF
Modèle: Moto C (namath_54)
Fabricant: motorola
Version de bande de base: MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P59, 2018/11/09 15:47
Version de RIL: android reference-ril 1.0
Numéro de build: NRD90M.062
Définir l'empreinte digitale: motorola/namath_54/namath:7.0/NRD90M.062/1553044434:user/release-keys
Bootloader: unknown
Java VM: ART 2.1.0
Version OS: Nougat (7.0)
SDK: 24
PROCESSEUR
Architecture du CPU: ARMv7 Processor rev 4 (v7l)
Board: unknown
Chipset: MT6737M
Coeurs: 4
Vitesse d'horloge: 221 MHz - 1092 MHz
Sets d'instructions: armeabi-v7a, armeabi
Caractéristiques du CPU: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm sha2
Gouverneur du CPU: interactive
Version du noyau: 3.18.35+
Architecture du noyau: armv7l
GRAPHIQUE
Rendeur: Mali-T720
Vendeur: ARM
Version OpenGL: OpenGL ES 3.1
RAM
Total: 907 MB
Monceau Java: 16 MB
**
-- Recently it has been running slow and some applications do not start and many windows appear (this application does not work)
I will not prolong you. I have modified it and I do not know how to find a suitable ROM for it. ## Please help me to search for a ROM that matches this information so I can avoid all errors. ##
I need help rooting my phone I could not get it any exploding with the app DevCheck Report
ZTE
ZTE 981
HARDWARE
Qualcomm® Snapdragon™ 617
Hardware: MSM8952
Cores: 8
CPU:
4 x Cortex-A53
4 x Cortex-A53
Process: 28 nm
Frequencies:
806 MHz - 1209 MHz
offline
Governor: interactive
GRAPHICS
Vendor: Qualcomm
GPU: Adreno (TM) 405
OpenGL: OpenGL ES 3.1 [email protected] ([email protected])
Max frequency: 550 MHz
RAM 32 GB
RAM size: 2 GB
Type: LPDDR3 933 MHz
Bandwidth: 14.9 GB/s
Channels: 32-bit dual channel
Storage
Size: 32 GB
Filesystem: ext4
OTHER HARDWARE
Bluetooth support: Yes
Bluetooth LE support: Yes
USB host support: Yes
Infrared transmitter: No
NFC support: No
DEVICE
Model: Z981
Codename: urd
Manufacturer: ZTE
Serial Number: a07d8f1
SYSTEM
Android Version: 6.0.1 (Marshmallow)
Build: Z981V1.0.0B21
Security patch: August 1, 2017
Architecture: aarch64 (64-bit)
Instruction sets: arm64-v8a armeabi-v7a armeabi
Kernel: 3.10.84-perf-gcdba782-00725-g9a1b90d #1
[email protected]
gcc version 4.9.x-google 20140827 (prerelease) (GCC)
Wed Aug 2 13:48:17 CST 2017