Hi,
Is it possible to use vnc with the bluetooth ?
I want see my phone display on my android tablet ...
Because I haven't modem option, and so no internet on my tablet...
Thx you
Sent from my Transformer TF101 using xda premium
You can vnc with Wifi Direct if both support it, or connect with wifi hotspot (even if no modem) then use IP address and proper app to vnc.
As far as I know not with bluetooth, I may be wrong though.
Thing O Doom said:
You can vnc with Wifi Direct if both support it, or connect with wifi hotspot (even if no modem) then use IP address and proper app to vnc.
As far as I know not with bluetooth, I may be wrong though.
Click to expand...
Click to collapse
Thx for your response...
WiFi direct don't work on my tablet... And haven't hotspot here...
Sent from my Galaxy Nexus using XDA
"Even if no modem"
Meaning you don't need an internet connection/mobile data to do it, just wifi hotspot off of your nexus and connect with your TF. Wifi-direct should be working with latest ota or any aosp rom too.
Edit: Also try droidmote app. (does cost a bit of money, only if you can't get direct connect working)
Hi all. I am reaching out for some help.
I have unlocked my Photon Q and installed Superuser so now my phone is rooted. I have done the root checker and its verified that I am rooted. I have a reboot app that I use to do a quick reboot and works perfect because it required a rooted phone.
My problem is, whether I use Wifi Tether or FoxFi (and I have the latest release), the hotspot will turn on and show running and my computer will connect to the hotspot but the speeds are soooooooo slow that it actually times out.
I have done speedtests in the areas that I am trying to use the hotspot and will get 1.5 megs down easy. But when I use the hotspot, the speeds die down to almost nothing.
Anyone know of a fix? Should I lock the bootloader again? Any help would be appreciated!!
Thank you!!
Found Fix
Just found this and it works: WiFi Tether: use "Generic ICS" device type and check routing fix and MMS clamping
I have slow tethering speeds using Wifi Tether as well, but trying what you did didn't work. My phone Speedtests around 750-350kbps on 3G, but the tethering caps around 75-50kbps.
Sent from my XT897 using Tapatalk 2
If you are tethering to a PC I HIGHLY recommend you tether via USB. I have seen SIGNIFICANT speed differences through USB. Good Ole PDA Net does it for me! ;]
Yup, USB tether is quite a bit faster. Good find, thanks!
JamesChilds said:
If you are tethering to a PC I HIGHLY recommend you tether via USB. I have seen SIGNIFICANT speed differences through USB. Good Ole PDA Net does it for me! ;]
Click to expand...
Click to collapse
dpwhitty11 said:
Yup, USB tether is quite a bit faster. Good find, thanks!
Click to expand...
Click to collapse
I'm trying to use the built-in USB tether option (Settings -> Tethering & Mobile Hotspot -> USB Tethering is checked) and it does not work.
Now my Win7 PC does "see" a new RNDIS connection (creates a new 'local area connection' icon in Network Connections), and when I click on that connection I do see that it has an IP address/default gateway. I am able to ping the default gateway, however, I am not able to ping 8.8.8.8 or get to the internet.
I was using an app for wifi tethering previously, but that killed the battery so quickly USB charging couldn't keep up - it was draining faster than it was charging... I've used USB tethering in the past, and when it's possible I vastly prefer it - for the obvious reasons, and the ones listed above.
So is there a 'trick' to get USB tethering to work? Everything appears to be in place and functional, but the final step of getting online is just not working!
Sorry if the OP thinks I'm thread-jacking, I can create another thread - but this one seemed appropriate to post in for my issue.
Thanks!!
arrrghhh said:
I'm trying to use the built-in USB tether option (Settings -> Tethering & Mobile Hotspot -> USB Tethering is checked) and it does not work.
Now my Win7 PC does "see" a new RNDIS connection (creates a new 'local area connection' icon in Network Connections), and when I click on that connection I do see that it has an IP address/default gateway. I am able to ping the default gateway, however, I am not able to ping 8.8.8.8 or get to the internet.
I was using an app for wifi tethering previously, but that killed the battery so quickly USB charging couldn't keep up - it was draining faster than it was charging... I've used USB tethering in the past, and when it's possible I vastly prefer it - for the obvious reasons, and the ones listed above.
So is there a 'trick' to get USB tethering to work? Everything appears to be in place and functional, but the final step of getting online is just not working!
Sorry if the OP thinks I'm thread-jacking, I can create another thread - but this one seemed appropriate to post in for my issue.
Thanks!!
Click to expand...
Click to collapse
Use a USB tethering app? Like PDA Net or something.
Sent from my GT-N8013 using Tapatalk HD
dpwhitty11 said:
Use a USB tethering app? Like PDA Net or something.
Click to expand...
Click to collapse
Native USB tether doesn't work? The option is there, and it seems to connect... Like I said I get the RNDIS connection, so it seems to be functional. Just no internets.
I can try a third-party app, but would really rather not... especially if I have to pay for said app, when this functionality is built-in.
arrrghhh said:
Native USB tether doesn't work? The option is there, and it seems to connect... Like I said I get the RNDIS connection, so it seems to be functional. Just no internets.
I can try a third-party app, but would really rather not... especially if I have to pay for said app, when this functionality is built-in.
Click to expand...
Click to collapse
i think that's the thing about Sprint and the unlimited data plant(assuming you have service with them): they don't let you tether for free. Both the native wifi and usb tethering seem to require a subscrption... i get a popup on the phone saying it can't connect because i am not subscribed or whatever.
I use PdaNet+, aka FoxFi i believe, and it works well for usb tethering. I think the free version just has a usage limit.
Oh, i've seen the native hotspot hacked to work for free on some Samsung Sprint phones... not sure if the specifics are universal or not:
http://forum.xda-developers.com/showthread.php?t=1760712
yogi2010 said:
i think that's the thing about Sprint and the unlimited data plant(assuming you have service with them): they don't let you tether for free. Both the native wifi and usb tethering seem to require a subscrption... i get a popup on the phone saying it can't connect because i am not subscribed or whatever.
I use PdaNet+, aka FoxFi i believe, and it works well for usb tethering. I think the free version just has a usage limit.
Oh, i've seen the native hotspot hacked to work for free on some Samsung Sprint phones... not sure if the specifics are universal or not:
http://forum.xda-developers.com/showthread.php?t=1760712
Click to expand...
Click to collapse
Thanks for the response.
Wifi tethering works - although it does require a third party app. The built-in method didn't seem to work, and I didn't think there was a free USB tether app like there is for wifi tethering.
I guess USB tethering is the same deal, as I do not pay for any additional "tethering" options on my plan... But I've never gotten any nastygrams/popups about how I do not have the proper plan... hum.
I'll see if I can find an app that'll do it for free. Thanks again.
If anyone knows how to get the native method to work, let me know - just odd that everything seems to work, except for the actual connection part.
arrrghhh said:
Thanks for the response.
Wifi tethering works - although it does require a third party app. The built-in method didn't seem to work, and I didn't think there was a free USB tether app like there is for wifi tethering.
I guess USB tethering is the same deal, as I do not pay for any additional "tethering" options on my plan... But I've never gotten any nastygrams/popups about how I do not have the proper plan... hum.
I'll see if I can find an app that'll do it for free. Thanks again.
If anyone knows how to get the native method to work, let me know - just odd that everything seems to work, except for the actual connection part.
Click to expand...
Click to collapse
I just tried the native hotspot and usb tether again, and i didn't get any popup this time. So i think it is possible to not get a message but still have it be blocked in the ROM. On hotspot i could get it to connect but with no internet access.
If i get time and motivation, i might try messing around with the hack that i linked from the Epic 4G Touch, and seeing if i could make it work here. It doesn't look overly complicated as far as things go? And i've been meaning to learn about de- and re-compiling.
I use "Barnacle" for WIFI and "easytether" for usb. Both are decent but I have noticed Barnacle will fail sometimes when connected for a long period of time.
hfase said:
I use "Barnacle" for WIFI and "easytether" for usb. Both are decent but I have noticed Barnacle will fail sometimes when connected for a long period of time.
Click to expand...
Click to collapse
I used easytether in the past, I will try it again. I just tried SVTP Lite, and the USB Tether option said "not available".
I tried to download PDANet, but the Play Store said my carrier did not allow this app to be downloaded..... dafaq.
Edit - got EasyTether to work, but of course I didn't pay for it and the 'lite' version is pretty restricted. It's still slow as all get-out, so I must be in a black hole for service - I have 3-4 bars of 3g, but I am inside a concrete building.
Oh well. I guess I'll stick to wifi tethering as it's free, and unrestricted. I was hoping to find something similar for USB tethering, but it seems there is none... Let me know if you guys find something I missed. Thanks!
arrrghhh said:
I used easytether in the past, I will try it again. I just tried SVTP Lite, and the USB Tether option said "not available".
I tried to download PDANet, but the Play Store said my carrier did not allow this app to be downloaded..... dafaq.
Edit - got EasyTether to work, but of course I didn't pay for it and the 'lite' version is pretty restricted. It's still slow as all get-out, so I must be in a black hole for service - I have 3-4 bars of 3g, but I am inside a concrete building.
Oh well. I guess I'll stick to wifi tethering as it's free, and unrestricted. I was hoping to find something similar for USB tethering, but it seems there is none... Let me know if you guys find something I missed. Thanks!
Click to expand...
Click to collapse
You can get the apk for PDANet off the internet and install it that way.
Sent from my XT897 using Tapatalk 2
dpwhitty11 said:
You can get the apk for PDANet off the internet and install it that way.
Click to expand...
Click to collapse
Indeed, and done. Doesn't seem to be any faster than wifi tethering, and my battery still drains faster than it can charge when using it.....
So unless there's a free unrestricted method for USB tethering, I guess I will stick with wifi tethering, as it is free AND unrestricted
I'm currently running the cdma modded cm10 but hotspot wasnt working for me then i came across the evo lte forum forum.xda-developers.com/showthread.php?t=1704991 and added that line to my build.prop now the built-in usb and wifi tether work
Sent from my XT897 using xda app-developers app
arbosus said:
I'm currently running the cdma modded cm10 but hotspot wasnt working for me then i came across the evo lte forum forum.xda-developers.com/showthread.php?t=1704991 and added that line to my build.prop now the built-in usb and wifi tether work
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
Strange, I just installed the latest CM10 for CDMA... and after a bit of fudging to get service/data working at all, wifi hotspot works out of the box.
Make sure you're on the newest build.
On Stock ROMS just use ISWAT Tether unlocker from the market, then use the stock tethering app
https://play.google.com/store/apps/details?id=com.tetherunlocker&hl=it
It works fine even in ICS altough is made to overcome the general android changes introduced with JB 4.1.2.
You have to launch it once before using the stock tethering app (or buy the full version which is always active).
The Solutor said:
On Sock ROMS just use ISWAT Tether unlocker from the market, then use the stock tethering app
https://play.google.com/store/apps/details?id=com.tetherunlocker&hl=it
It works fine even in ICS altough is made to overcome the general android changes introduced with JB 4.1.2.
You have to launch it once before using the stock tethering app (or buy the full version which is always active).
Click to expand...
Click to collapse
Thanks so much for posting about this one...
I had tried several wifi tether options on my Photon and none seemed to work. Some I couldn't even see the hotspot, some I could and could connect but the actually connection wouldn't work (i.e load pages).
Just tried the app above and it works flawlessly. I'll use it sparingly a bit, and make sure to check my next bill to ensure that Sprint doesn't ding me for a hotspot charge, but at least from a functionality approach it works great!
:good:
Coucher said:
Thanks so much for posting about this one...
Click to expand...
Click to collapse
You're welcome !
I had tried several wifi tether options on my Photon and none seemed to work. Some I couldn't even see the hotspot, some I could and could connect but the actually connection wouldn't work (i.e load pages).
Click to expand...
Click to collapse
Frankly I was really surprised to see Photon's behavior, being mine on ICS (usually I use GB,ICS, or JB 4.1.1 purposely to avoid tethering problems), so I guessed that Sprint anticipated Google's move.
Looks like I was right.
Just tried the app above and it works flawlessly. I'll use it sparingly a bit, and make sure to check my next bill to ensure that Sprint doesn't ding me for a hotspot charge, but at least from a functionality approach it works great!
Click to expand...
Click to collapse
The app is written by an Italian to avoid the tethering charges from Vodafone Italy, that Vodafone users are facing since the release of JB 4.1.2, i guess the same should apply to Sprint users in the US, but obviously I can't be sure .
I have a not that unusual request but google searching it is impossible due to the interchangable words and their context.....
I have an Android device with a WiFi hotspot app installed that allows me to connect to hotspots anywhere.
I am at a friends who's internet connection is currently down and needs to get online for a few hours.
I have my USB to device cable.
So I want to do.....
His Computer --> USB Cable --> My Android Device --> WiFi Connection --> My Hotspot provider --> Interweb
This would seem to be fairly standard proxy forwarding to me, so is there a proxy server app for Android?
Before anyone suggests it I can't use tethering as he wants a shedload of data and it would break my 3g cap.
Thanks in advance.
Sent from my GT-P6800 using xda app-developers app
Anyone?
Sent from my GT-P6800 using xda app-developers app
Surely someone has done this?
Sent from my GT-P6800 using xda app-developers app
Look buddy if you want to connect your friends phone with your wifi hotspot then turn it on in settings.
You must know that there is a difference in wifi and wifi hotspot.
Your android phone must be enable of wifi hotspot or wifi tethering.
And specify your particular problem.dont mess your question.
Sent from my Micromax Canvas 2 using xda app-developers app
shivg86 said:
Look buddy if you want to connect your friends phone with your wifi hotspot then turn it on in settings.
You must know that there is a difference in wifi and wifi hotspot.
Your android phone must be enable of wifi hotspot or wifi tethering.
And specify your particular problem.dont mess your question.
Sent from my Micromax Canvas 2 using xda app-developers app
Click to expand...
Click to collapse
What?
I made it clear above what I'm trying to do. If you don't understand just ask questions.
Sent from my GT-P6800 using xda app-developers app
PDANET 3.5 via USB tetheror JB USB tethering.
Just enable disable radios, start thering on the device, plug it in.. you may need a client on the pc (as in PDANET).
They are what you are looking for.
pinsb said:
I have a not that unusual request but google searching it is impossible due to the interchangable words and their context.....
I have an Android device with a WiFi hotspot app installed that allows me to connect to hotspots anywhere.
I am at a friends who's internet connection is currently down and needs to get online for a few hours.
I have my USB to device cable.
So I want to do.....
His Computer --> USB Cable --> My Android Device --> WiFi Connection --> My Hotspot provider --> Interweb
This would seem to be fairly standard proxy forwarding to me, so is there a proxy server app for Android?
Before anyone suggests it I can't use tethering as he wants a shedload of data and it would break my 3g cap.
Thanks in advance.
Sent from my GT-P6800 using xda app-developers app
Click to expand...
Click to collapse
please don't be angry about me ..
but i really want to get the vpn option to work for me.
i have asus ac66u router and i do everything that write over here http://forum.xda-developers.com/showthread.php?t=2395290
i make it so close .. i can connect ..with vpn but when i try to connect to my computer in the stream screen its disconnect form the network.
i can ? use vpn if i connect in the shield on the same network?
I have the AC66R, which is the same version. I enabled VPN server, added a UN and it worked for me. How fast is your upload?
Sent from my Nexus 7 using xda app-developers app
uakerbl emma
darkjedi said:
I have the AC66R, which is the same version. I enabled VPN server, added a UN and it worked for me. How fast is your upload?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
hello to you thanks for trying to help me
I setup on win 8 with the vpn guide over here and I got it to work ..but after I enable and set vpn...
my USB-N53 network adapter going crazy if I change network to 2.4 or 5
it stock all my pc and take a lot of time to connect why is that ?
and when I try to delete the vpn completely ..from my pc the problem stay ..so...how can I delete complete the vpn ? from my pc ..
and there is other why that will not make the usb adapter slow response ?
Hi! I am just wondering if someone know how I can wake up my computer by using Splashtop app through 3G or other wifi network.
I have successfully wakening up my computer by being at the same wifi with my computer (lan), but it wont work when I connect my tf300 through 3G or other networks. I have also been able to forward my ports so I can remote my computer through 3G or other networks.
So do anyone know how I can wake my computer through other networks?
instead i've been downgrading to splashtop v1 coz in v2 it wont work.
ajestapaknaga said:
Hi! I am just wondering if someone know how I can wake up my computer by using Splashtop app through 3G or other wifi network.
I have successfully wakening up my computer by being at the same wifi with my computer (lan), but it wont work when I connect my tf300 through 3G or other networks. I have also been able to forward my ports so I can remote my computer through 3G or other networks.
So do anyone know how I can wake my computer through other networks?
instead i've been downgrading to splashtop v1 coz in v2 it wont work.
Click to expand...
Click to collapse
Splashtop 2 changed the port it used?
cmendonc2 said:
Splashtop 2 changed the port it used?
Click to expand...
Click to collapse
didn't know exactly if it changed or not, but i've tried to make port forwarding in my modem/router and succeed but i still can't send a magic packet like they used to.
PHP:
ajestapaknaga said:
didn't know exactly if it changed or not, but i've tried to make port forwarding in my modem/router and succeed but i still can't send a magic packet like they used to.
Click to expand...
Click to collapse
Go into the splashtop streamer settings to advanced settings and all the port info should be there, make sure that ip address and port is used for the port forwarding
cmendonc2 said:
PHP:
Go into the splashtop streamer settings to advanced settings and all the port info should be there, make sure that ip address and port is used for the port forwarding
Click to expand...
Click to collapse
you mean port in splashtop that i must input to the modem/router, is that right?
ajestapaknaga said:
you mean port in splashtop that i must input to the modem/router, is that right?
Click to expand...
Click to collapse
Yes...I thought that splashtop 2 only worked on other networks with premium package, do you have that?
cmendonc2 said:
Yes...I thought that splashtop 2 only worked on other networks with premium package, do you have that?
Click to expand...
Click to collapse
yes i do have bought premium package anywhere access.
ajestapaknaga said:
yes i do have bought premium package anywhere access.
Click to expand...
Click to collapse
Perform port forwarding (both TCP/UDP for ports 6783~6785, and ports 7, 9) for your Streamer on your home router.
Click to expand...
Click to collapse
Does that match your port forwarding setup?
cmendonc2 said:
Does that match your port forwarding setup?
Click to expand...
Click to collapse
indeed it does and i've test it with port check app and result is open, gud news is when i tried yesterday it works.!! but only one times. dunno maybe the 3g network here is lil bit slow i think so the magic packet were sended too long.